1 commit 0f8cbc1829d9c7d9616fd29b366a99d037facdcd
2 Author: Jason Jin <Jason.jin@freescale.com>
3 Date: Fri Oct 10 11:41:01 2008 +0800
5 Do not init SATA when disabled on 8536DS.
7 SGMII and SATA share the serdes on MPC8536 CPU, When SATA disabled and the
8 driver still try to access the SATA registers, the cpu will hangup.
9 This patch try to fix this by reading the serdes status before the SATA
12 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
13 Acked-by: Andy Fleming <afleming@freescale.com>
15 commit ec4d8c1c1d94a790c1473ae8aace282b817c3123
16 Author: Nikita V. Youshchenko <yoush@cs.msu.su>
17 Date: Fri Oct 3 00:03:55 2008 +0400
19 fsl_diu: fix alignment error that caused malloc corruption
21 When aligning malloc()ed screen_base, invalid offset was added.
22 This not only caused misaligned result (which did not cause hardware
23 misbehaviour), but - worse - caused screen_base + smem_len to
24 be out of malloc()ed space, which in turn caused breakage of
25 futher malloc()/free() operation.
27 This patch fixes screen_base alignment.
29 Also this patch makes memset() that cleans framebuffer to be executed
30 on first initialization of diu, not only on re-initialization. It looks
31 correct to clean the framebuffer instead of displaying random garbage;
32 I believe that was disabled only because that memset caused breakage
33 of malloc/free described above - which no longer happens with the fix
36 Signed-off-by: Nikita V. Youshchenko <yoush@debian.org>
38 commit 3d0ea3110f3431b6c2aee882784f39f97b20bce9
39 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
40 Date: Wed Sep 24 10:29:37 2008 +0200
42 api: Fix building with CONFIG_API
44 This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE.
46 USB_MAX_STOR_DEV is defined in include/usb.h, but
47 needed in api/api_storage.c.
49 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
51 commit abbb90666d5ef2f500ebbedbb80ff60adc56b043
52 Author: Peter Tyser <ptyser@xes-inc.com>
53 Date: Tue Sep 23 12:39:40 2008 -0500
55 Remove unused CFG_EEPROM_PAGE_WRITE_ENABLE references
57 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
59 commit 81e612014c40c922ec35488d17c504d4e9286f06
60 Author: Peter Tyser <ptyser@xes-inc.com>
61 Date: Tue Sep 23 12:38:42 2008 -0500
63 Remove CFG_EEPROM_PAGE* dependencies for temperature sensors
65 The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and
66 CFG_EEPROM_PAGE_WRITE_BITS in various temperature
67 sensor drivers are not necessary
69 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
71 commit c46980f6d2135ade345dadc1fb1f1f4c8bbf255a
72 Author: Mike Frysinger <vapier@gentoo.org>
73 Date: Tue Oct 14 07:04:38 2008 -0400
75 cmd_spi: remove broken signed casting for display
77 Since we're working with unsigned data, you can't apply a signed pointer
78 cast and then attempt to print the result. Otherwise you get wrong output
79 when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".
81 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
83 commit d5fd0b49210c941de8a1fce3947ace92243ab5ca
84 Author: Mike Frysinger <vapier@gentoo.org>
85 Date: Tue Oct 14 07:05:24 2008 -0400
87 strings cmd: drop old CONFIG_CFG_STRINGS define
89 We don't need CONFIG_CFG_STRINGS anymore now that we have the define
90 CONFIG_CMD_STRINGS and Makefile control.
92 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
94 commit fecb5ade3b37f62981f2b05b621005850173aaa9
95 Author: Jason Jin <Jason.jin@freescale.com>
96 Date: Fri Sep 19 17:32:49 2008 +0800
98 Fix the NAND size overflow issue.
100 When the total size of all NAND devices exceeds 4 GiB, the size will
101 overflow. This patch tries to fix this.
103 Note that we still have a problem when a single NAND device is bigger
104 than 4 GiB: then the overflow would actually happen earlier, i. e.
105 when storing the size in nand_info[].size, as nand_info[].size is an
108 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
109 Signed-off-by: Wolfgang Denk <wd@denx.de>
111 commit 30f574717277238b9014b8136c90eea77196490f
112 Author: Louis Su <louis@asix.com.tw>
113 Date: Wed Jul 9 11:01:37 2008 +0800
115 AX88180: new gigabit network driver
117 Signed-off-by: Louis Su <louis@asix.com.tw>
118 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
120 commit c9d6b6925344740ca1db2f8a6bab7921ff820de3
121 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
122 Date: Tue Aug 19 16:07:03 2008 +0200
124 enable 10/100M at VSC8601 at tsec driver
126 Currently VSC8601 doesn't link with 10/100M partners if the
127 EEPROM/Strapping is not set up.
128 Setting the auto-neg register fixes this.
130 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
131 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
133 commit 702c85b0e876d587c11acdbb55738ee52acd54f4
134 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
135 Date: Tue Sep 30 15:02:53 2008 +0900
137 net: ne2000: Divided a function of NE2000 driver
139 get_prom function was used __attriute__ , but it is not enable.
140 ax88796.o does not do link besides ne2000.o. When ld is carried
141 out, get_prom function of ax88796.c is ignored.
142 This problem is a thing by specifications of ld.
143 I checked and test this patch on SuperH and MIPS.
145 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
146 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
148 commit 05c7e9070fe4d751e029fd9524bfbbc93cbb1393
149 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
150 Date: Tue Oct 14 11:10:59 2008 +0900
152 sh: rsk7203: Add smc911x driver support to board config file
154 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
155 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
157 commit cae6f909baf86357b3c0bd01acfc414348c4d175
158 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
159 Date: Thu Oct 9 13:54:33 2008 +0900
161 sh: Fix cannot execute a stand-alone application
163 Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it.
165 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
166 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
168 commit 6df0efd5c86ca1689deeb2738b46b7d83ce228ef
169 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
170 Date: Wed Oct 8 23:38:00 2008 -0500
172 fsl_pci_init do not scan bus when configured as an end-point
174 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
175 Acked-by: Andy Fleming <afleming@freescale.com>
177 commit 6f099bbac1ba5dfb46ee7ad29dc53713f0501ba5
178 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
179 Date: Tue Sep 16 17:07:53 2008 -0400
181 ARM DaVinci: Remove redundant setting of GD_FLG_RELOC for sffsdr board.
183 This is no longer necessary now that the GD_FLG_RELOC flag is set for
186 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
188 commit d977a57356657ba241256231efca32828a5822f9
189 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
190 Date: Sat Sep 13 10:04:32 2008 +0200
192 Fix lzma uncompress call (image_start wrongly used instead image_len)
194 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
196 commit 392438406041415fe64ab8748ec5ab5ad01d1cf7
197 Author: Nick Spence <nick.spence@freescale.com>
198 Date: Thu Aug 28 14:09:15 2008 -0700
200 mpc86xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
202 This is needed in unlock_ram_in_cache() because it is called from C and
203 will corrupt the small data area anchor that is kept in R2.
205 lock_ram_in_cache() is modified similarly as good coding practice, but
206 is not called from C.
208 Signed-off-by: Nick Spence <nick.spence@freescale.com>
210 commit 5c7cbcd34d0ee566875a4fd0f2a3e5a62bba921c
211 Author: Kumar Gala <galak@kernel.crashing.org>
212 Date: Tue Aug 19 15:05:34 2008 -0500
214 86xx: remove redudant code with lib_ppc/interrupts.c
216 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
217 Not know how that happened, but there is no good reason for it.
219 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
222 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
224 commit 0d01f66d235118515b5086b88f82498bc0695d6a
225 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
226 Date: Thu Oct 9 01:26:36 2008 -0500
228 CFI: cfi_flash write fix for AMD legacy
230 The flash_unlock_seq requires a sector for AMD_LEGACY.
231 Fix a retcode check typeo.
233 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
234 Signed-off-by: Stefan Roese <sr@denx.de>
236 commit 542b385a620a1783454a00424930e51895f45073
237 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
238 Date: Tue Oct 7 13:13:10 2008 +0200
240 ppc4xx: Fix USB 2.0 phy reset sequence
242 This patch fixes USB 2.0 communication issues on some DU440 boards.
244 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
245 Signed-off-by: Stefan Roese <sr@denx.de>
247 commit df8c1ce11114c2260dedb5547281945f7db8fa5c
248 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
249 Date: Tue Oct 7 13:13:09 2008 +0200
251 ppc4xx: Add strapping mode for 667MHz CPU frequency on DU440 board
253 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
254 Signed-off-by: Stefan Roese <sr@denx.de>
256 commit 6a133d6a00b1fc7b9257cd5925d8cb67f75ecda2
257 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
258 Date: Tue Oct 7 13:13:08 2008 +0200
260 ppc4xx: Fix DU440 GPIO configuration
262 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
263 Signed-off-by: Stefan Roese <sr@denx.de>
265 commit 35dd025c70fcc4389317db2f2a9d14795172137d
266 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
267 Date: Tue Oct 7 13:13:07 2008 +0200
269 ppc4xx: Update DU440 config
271 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
272 Signed-off-by: Stefan Roese <sr@denx.de>
274 commit f3bf9273939ffe1a60a32a2eef909097f15df56b
275 Author: Kumar Gala <galak@kernel.crashing.org>
276 Date: Wed Oct 8 15:36:39 2008 -0500
278 MPC8572DS: Fix compile warnings
280 Commit 445a7b38308eb05b41de74165b20855db58c7ee5 introduced the following
283 cmd_i2c.c:112: warning: missing braces around initializer
284 cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]')
286 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
288 commit dffd2446fb041f38ef034b0fcf41e51e5e489159
289 Author: Wolfgang Grandegger <wg@grandegger.com>
290 Date: Tue Sep 30 10:55:57 2008 +0200
292 85xx: Using proper I2C source clock divider for MPC8544
294 Measurements with our MPC8544 board showed that the I2C bus frequency
295 is wrong by a factor of 1.5. Obviously, the interpretation of the
296 MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not
297 correct. There seems to be an error in the 8544 RM.
299 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
301 commit e46c7bfb8bc3c304cedd20f7a365d6e78d7eaf17
302 Author: Rafal Czubak <rcz@semihalf.com>
303 Date: Wed Oct 8 13:41:30 2008 +0200
305 FSL: Fix get_cpu_board_revision() return value.
307 get_cpu_board_revision() returned board revision based on information stored
308 in global static struct eeprom. It should instead use one from local struct
309 board_eeprom, to which the data is actually read from EEPROM. The bug led to
310 system hang after printing L1 cache information on U-Boot startup. The problem
311 was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx
312 boards using CFG_I2C_EEPROM_CCID.
314 The change has been successfully tested on MPC8555CDS system.
316 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
318 commit 747f316cca484ed627a97dd3391febabce384186
319 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
320 Date: Tue Sep 30 20:08:49 2008 +0200
322 update uImage FIT multi documentation
324 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
326 commit 77a0355f60b801f232ce0a5bfbe95331fa3b6bc0
327 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
328 Date: Tue Sep 30 20:08:36 2008 +0200
330 move README.imx31 to doc/ and merge with README.mx31
332 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
334 commit 1ed7a7f0f571b13d46530f8f8b9aff3957f15a96
335 Author: Guennadi Liakhovetski <lg@denx.de>
336 Date: Thu Sep 25 20:54:37 2008 +0200
338 i.MX31: switch to CFG_HZ=1000
340 Switch to the standard CFG_HZ=1000 value, while at it, minor white-space
341 cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads,
342 provides 2% or 0.4% precision depending on the
343 CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s
346 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
348 commit f41b144c11341b571eab7dcef6c4b8e03c92d2b2
349 Author: gnusercn <gnusercn@gmail.com>
350 Date: Wed Oct 8 18:58:58 2008 +0200
352 Fix bug: in arch-arm, env_get_char dose not work fine
354 due to the arm implementation which supposed that U-Boot is in RAM
355 when we jump to start_armboot
357 Signed-off-by: gnusercn <gnusercn@gmail.com>
358 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
360 commit f8a00dea841d5d75de1f8e8107e90ee1beeddf5f
361 Author: Adam Graham <agraham@amcc.com>
362 Date: Mon Oct 6 10:16:13 2008 -0700
364 ppc4xx: Reset and relock memory DLL after SDRAM_CLKTR change
366 After changing SDRAM_CLKTR phase value rerun the memory preload
367 initialization sequence (INITPLR) to reset and relock the memory
368 DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing
369 adjustment effects the phase relationship of the internal, to the
370 PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT.
372 Signed-off-by: Adam Graham <agraham@amcc.com>
373 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
374 Signed-off-by: Stefan Roese <sr@denx.de>
376 commit 5297246bbaa9943c0da1ec2e717b72e4ab6b830e
377 Author: Haiying Wang <Haiying.Wang@freescale.com>
378 Date: Fri Oct 3 11:48:03 2008 -0400
380 Remove redundant #define for MPC8536DS
382 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
384 commit 445a7b38308eb05b41de74165b20855db58c7ee5
385 Author: Haiying Wang <Haiying.Wang@freescale.com>
386 Date: Fri Oct 3 11:47:30 2008 -0400
388 Add ID EEPROM support for MPC8572DS
390 The ID EEPROM on MPC8572DS board locates on I2C bus 1. Its the storage for
391 system information like mac addresses etc. This patch enables it.
393 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
395 commit 1f3ba317a5c5f3a7aabf580fddc211f4bb5a4540
396 Author: Haiying Wang <Haiying.Wang@freescale.com>
397 Date: Fri Oct 3 11:46:59 2008 -0400
399 Minor fixes for I2C address on MPC8572DS
401 MPC8572DS has two i2c buses. This patch moves the DDR SPD_EEPROM to i2c bus 1
402 according to the board spec, and adds the 2nd i2c bus offset.
404 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
406 commit c0391111c33c22fabeddf8f4ca801ec7645b4f5c
407 Author: Jason Jin <Jason.jin@freescale.com>
408 Date: Sat Sep 27 14:40:57 2008 +0800
410 Fix the incorrect DDR clk freq reporting on 8536DS
412 On 8536DS board, When the DDR clk is set async mode(SW3[6:8] != 111),
413 The display is still sync mode DDR freq. This patch try to fix
414 this. The display DDR freq is now the actual freq in both
417 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
419 commit bac6a1d1fa1cd80aa57881fa9c2152b853cd0ed4
420 Author: Kumar Gala <galak@kernel.crashing.org>
421 Date: Tue Oct 7 10:28:46 2008 -0500
423 85xx: Remove setting of *cache-line-size in device trees
425 ePAPR says if the *cache-block-size is the same as *cache-line-size
426 than we don't need the *cache-line-size property.
428 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
430 commit cd3cb0d9269d155276b00207e3816a9347fd1c92
431 Author: Gerald Van Baren <vanbaren@cideas.com>
432 Date: Sat Oct 4 07:56:06 2008 -0400
434 libfdt: Fix error in documentation for fdt_get_alias_namelen()
436 Oops, screwed up the function name in the documenting comment for this
437 function. Trivial correction in this patch.
439 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
440 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
442 commit 9a6cf73a88ddab2e1ac39088f2806177982cc62c
443 Author: David Gibson <david@gibson.dropbear.id.au>
444 Date: Wed Aug 20 16:55:14 2008 +1000
446 libfdt: Add function to explicitly expand aliases
448 Kumar has already added alias expansion to fdt_path_offset().
449 However, in some circumstances it may be convenient for the user of
450 libfdt to explicitly get the string expansion of an alias. This patch
451 adds a function to do this, fdt_get_alias(), and uses it to implement
454 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
456 commit 2215987e100d2a841ae6d48a7cc9bb83fcf22737
457 Author: Mike Frysinger <vapier@gentoo.org>
458 Date: Thu Oct 2 01:55:38 2008 -0400
460 cfi_flash: do not reset flash when probe fails
462 The CFI flash driver starts at flash_init() which calls down into
463 flash_get_size(). This starts by calling flash_detect_cfi(). If said
464 function fails, flash_get_size() finishes by attempting to reset the
465 flash. Unfortunately, it does this with an info->portwidth set to 0x10
466 which filters down into flash_make_cmd() and that happily smashes the
467 stack by sticking info->portwidth bytes into a cfiword_t variable that
468 lives on the stack. On a 64bit system you probably won't notice, but
469 killing the last 8 bytes on a 32bit system usually leads to a corrupt
470 return address. Which is what happens on a Blackfin system.
472 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
473 Signed-off-by: Stefan Roese <sr@denx.de>
475 commit 3e38577208e4256956bc33bb8bcd0a6b6fab55c3
476 Author: Stefan Roese <sr@denx.de>
477 Date: Fri Sep 26 17:03:26 2008 +0200
479 fdt: Overwrite /chosen node in bootm if it already exists in the dtb
481 Set force parameter in fdt_chosen() call in do_bootm_linux() call.
482 Without this, the chosen node is not overwritten if it already
485 Signed-off-by: Stefan Roese <sr@denx.de>
487 commit 741a6d010d09b5bafca8e4cdfb6b2f8a2c07994d
488 Author: Jon Loeliger <jdl@freescale.com>
489 Date: Thu Sep 25 11:02:17 2008 -0500
491 Fix an overflow case in fdt_offset_ptr() detected by GCC 4.3.
493 Using Gcc 4.3 detected this problem:
495 ../dtc/libfdt/fdt.c: In function 'fdt_next_tag':
496 ../dtc/libfdt/fdt.c:82: error: assuming signed overflow does not
497 occur when assuming that (X + c) < X is always false
499 To fix the problem, treat the offset as an unsigned int.
501 The problem report and proposed fix were provided
502 by Steve Papacharalambous <stevep@freescale.com>.
504 Signed-off-by: Jon Loeliger <jdl@freescale.com>
506 commit bbdbc7cb3abefda5bd998edbcf0508fe6256327d
507 Author: David Gibson <david@gibson.dropbear.id.au>
508 Date: Fri Aug 29 14:19:13 2008 +1000
510 libfdt: Fix bugs in fdt_get_path()
512 The current implementation of fdt_get_path() has a couple of bugs,
515 First, contrary to its documentation, on success it returns the length
516 of the node's path, rather than 0. The testcase is correspondingly
517 wrong, and the patch fixes this as well.
519 Second, in some circumstances, it will return -FDT_ERR_BADOFFSET
520 instead of -FDT_ERR_NOSPACE when given insufficient buffer space.
521 Specifically this happens when there is insufficient space even to
522 hold the path's second last component. This behaviour is corrected,
523 and the testcase updated to check it.
525 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
527 commit 33af3e6656e84660d397b5dd95abab2dccc36f83
528 Author: Wolfgang Denk <wd@denx.de>
529 Date: Wed Oct 1 12:34:58 2008 +0200
531 TQM5200: enable support for ATAPI devices
533 Signed-off-by: Wolfgang Denk <wd@denx.de>
535 commit d13ff2358ff8c384f52eaf46f5d60258acf96ea6
536 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
537 Date: Mon Sep 15 05:48:25 2008 +0200
539 Revert "ARM: set GD_FLG_RELOC for boards skipping relocation to RAM"
541 we need this due to the arm implementation which supposed that U-Boot
542 is in RAM when we jump to start_armboot
544 This reverts commit f96b44cef897bd372beb86dde1b33637c119d84d.
545 in order to do it for all arm board
547 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
549 commit 7fd0bea2e4a78eab7e6693140940f9f9a0009bc2
550 Author: Kim Phillips <kim.phillips@freescale.com>
551 Date: Wed Sep 24 08:46:25 2008 -0500
553 mpc83xx: don't disable autoboot
555 bootdelay set to -1 'permanently' disables autobooting, even if
556 bootcmd is specified. Change to a positive value to allow
557 autobooting when a bootcmd is set.
559 Reported-by: Coray Tate <Coray.Tate@freescale.com>
560 Cc: Scott Wood <scottwood@freescale.com>
561 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
563 commit 2fb29c520c42b7bfef33ea3fd1527eba64099164
564 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
565 Date: Wed Sep 24 10:42:15 2008 +0900
567 mpc83xx: Fix typo in include/mpc83xx.h
569 Fixed typo from CONIFG_MPC837X to CONFIG_MPC837X
571 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
572 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
574 commit 162c41c03179727a1d14262f703c9a8bc40231fa
575 Author: Kim Phillips <kim.phillips@freescale.com>
576 Date: Tue Sep 23 09:38:49 2008 -0500
578 mpc83xx: add h/w flash protection to board configs
580 the operating system may leave flash in a h/w locked state after writing.
581 This allows u-boot to continue to write flash by enabling h/w unlocking
584 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
586 commit d26154c9a692586b66eb6d1f8e1b67c75e40ea70
587 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
588 Date: Thu Sep 11 21:35:36 2008 +0400
590 mpc83xx: spd_sdram: fix ddr sdram base address assignment bug
592 The spd_dram code shifts the base address, then masks 20 bits, but
593 forgets to shift the base address back. Fix this by just masking the
594 base address correctly.
596 Found this bug while trying to relocate a DDR memory at the base != 0.
598 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
599 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
601 commit 8fd4166c467a46773f80208bda1ec3b4757747bc
602 Author: Stefan Roese <sr@denx.de>
603 Date: Mon Sep 22 16:10:43 2008 +0200
605 ppc4xx: Canyonlands: Remove unnecessary FDT warning upon DTB fixup
607 Depending on the configuration jumper "SATA SELECT", U-Boot disabled
608 either one PCIe node or the SATA node in the device tree blob. This
609 patch removes the unnecessary and even confusing warning, when the node
612 Signed-off-by: Stefan Roese <sr@denx.de>
614 commit 6e24a1eb1490aa043770bcf0061ac1fad0864fd9
615 Author: Remy Bohmer <linux@bohmer.net>
616 Date: Fri Sep 19 13:30:06 2008 +0200
618 Add missing device types to dev_print() in part.c
620 Signed-off-by: Remy Bohmer <linux@bohmer.net>
622 commit 5fdc215f0b351b0c36cc3f8a0fa5850f24454bed
623 Author: Wolfgang Denk <wd@denx.de>
624 Date: Mon Sep 22 22:23:06 2008 +0200
626 Fix DPRAM memory leak when CFG_ALLOC_DPRAM is defined, which
627 eventually leads to a machine check. This change assures that DPRAM
628 is allocated only once in that case.
630 Signed-off-by: Gary Jennejohn <garyj@denx.de>
631 Signed-off-by: Wolfgang Denk <wd@denx.de>
633 commit a07faf7b9ad5a86763a577c79922c4ff9a70ef23
634 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
635 Date: Wed Sep 17 17:57:34 2008 +0200
637 Fix Spartan-3 definitions.
639 A few Spartan-3 definitions erroneously use Spartan-3E size
640 constants. This patch fixes them.
642 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
644 commit 28113e1f0da4146b823ffce37680d31d5685a60b
645 Author: Laurent Pinchart <laurentp@cse-semaphore.com>
646 Date: Wed Sep 17 17:41:58 2008 +0200
648 Remove duplicate Spartan-3E definition.
650 Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
651 Signed-off-by: Wolfgang Denk <wd@denx.de>
653 commit 5c65ecf7cd94df250b295621f3b24135cbcfe579
654 Author: Anatolij Gustschin <agust@denx.de>
655 Date: Wed Sep 17 13:46:17 2008 +0200
657 socrates: change default mtest address range
659 Running mtest command on socrates without specifying
660 an address range crashes the board. This patch changes
661 default mtest address range to prevent this behavior.
663 Signed-off-by: Anatolij Gustschin <agust@denx.de>
665 commit d666b2d59674b5e002c0821b7ab83ec3ff90d670
666 Author: Anatolij Gustschin <agust@denx.de>
667 Date: Wed Sep 17 12:34:45 2008 +0200
669 socrates: fix crash after relocation
671 Currently U-Boot crashes after relocation to RAM.
672 Changing the CPO value of the DDR SDRAM TIMING_CFG_2
673 register to READ_LAT + 1 (to the value it was before
674 conversion of socrates to new DDR code) fixes the
677 Signed-off-by: Anatolij Gustschin <agust@denx.de>
679 commit 562788b0a303f3528b920d81f547f5ca77ba528e
680 Author: Anatolij Gustschin <agust@denx.de>
681 Date: Wed Sep 17 11:45:51 2008 +0200
683 socrates: fix SPD EEPROM address
685 Commit be0bd8234b9777ecd63c4c686f72af070d886517
686 changed SPD EEPROM address to 0x51 and DDR SDRAM
687 detection stopped working. Change this address
690 Signed-off-by: Anatolij Gustschin <agust@denx.de>
692 commit 023824549a370bd185d7129d9a6c86f9be7b86a8
693 Author: Stefan Roese <sr@denx.de>
694 Date: Mon Sep 22 11:06:50 2008 +0200
696 Revert "ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)"
698 This reverts commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8.
700 Signed-off-by: Stefan Roese <sr@denx.de>
702 commit b5d10a13525c07ec6374adf840d7c87553b5f189
703 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
704 Date: Thu Sep 18 19:34:36 2008 +0900
706 sh: Fix compile warning
708 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
710 commit 4a065abf926f128beb36d93449defa0d690e7fef
711 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
712 Date: Thu Sep 18 19:04:26 2008 +0900
714 sh: Add support watchdog for SH4A core
716 Add support watchdog for SH4A core (SH7763, SH7780 and SH7785).
717 And fix some compile warning.
719 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
721 commit a03c09c5fdb8430fe2ae6a03f88a0cf7bcc0aa57
722 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
723 Date: Wed Sep 17 11:45:26 2008 +0900
725 sh: Fix typo in SH serial driver
727 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
728 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
730 commit 6b44a439215ba7c63f666f8099213ea4f05f2b07
731 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
732 Date: Wed Sep 17 11:08:36 2008 +0900
734 sh: Add support any page size and empty_zero_page to SH Linux uImage
736 Old U-Boot supported 4KB page size only. If this version, Linux
737 kernel can not get command line from U-Boot.
738 SH Linux kernel can change page size and empty_zero_page.
739 This patch support this function and fix promlem.
741 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
742 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
744 commit ce9f99ddb59628f41dc534e892368a7d66dfc774
745 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
746 Date: Thu Aug 28 13:40:52 2008 +0900
748 sh: rsk7203: Add support pkt_data_pull and pkt_data_push function
750 Add function of smc911x, pkt_data_pull and pkt_data_push.
752 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
753 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
755 commit dd820b03a2f45e86e7960e26729a3b58e3dda44a
756 Author: Wolfgang Denk <wd@denx.de>
757 Date: Thu Sep 18 13:57:32 2008 +0200
759 ADS5121: fix typo in "rootpath" default setting
761 Signed-off-by: Wolfgang Denk <wd@denx.de>
763 commit 87b4ef560cf2da4ccc9e59711ad1ff7fafe96670
764 Author: Wolfgang Denk <wd@denx.de>
765 Date: Wed Sep 17 10:17:55 2008 +0200
767 Coding style cleanup; update CHANEGLOG
769 Signed-off-by: Wolfgang Denk <wd@denx.de>
771 commit 3eec160a3a405b29ce9c06920f6427b9047dd8a8
772 Author: Victor Gallardo <vgallardo@amcc.com>
773 Date: Tue Sep 16 06:59:13 2008 -0700
775 ppc4xx: Fix DDR2 auto calibration on Kilauea 600MHz (200MHz PLB)
777 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
778 Signed-off-by: Adam Graham <agraham@amcc.com>
779 Signed-off-by: Stefan Roese <sr@denx.de>
781 commit ce47eb402c5e29a025399dc282246414fc492940
782 Author: Peter Tyser <ptyser@xes-inc.com>
783 Date: Tue Sep 16 10:04:47 2008 -0500
785 Support for multiple SGMII/TBI interfaces for TSEC ethernet
787 Fix TBI PHY accesses to use the proper offset in CPU register space. The
788 previous code would incorrectly access the TBI PHY by reading/writing to CPU
789 register space at the same location as would be used to access external PHYs.
791 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
792 Acked-by: Andy Fleming <afleming@freescale.com>
794 commit 7c803be2eb3cae245dedda438776e08fb122250f
795 Author: Wolfgang Denk <wd@denx.de>
796 Date: Tue Sep 16 18:02:19 2008 +0200
798 TQM8xx: Fix CFI flash driver support for all TQM8xx based boards
800 After switching to using the CFI flash driver, the correct remapping
801 of the flash banks was forgotten.
803 Also, some boards were not adapted, and the old legacy flash driver
806 Signed-off-by: Wolfgang Denk <wd@denx.de>
808 commit c0d2f87d6c450128b88e73eea715fa3654f65b6c
809 Author: Wolfgang Denk <wd@denx.de>
810 Date: Sun Sep 14 00:59:35 2008 +0200
814 Signed-off-by: Wolfgang Denk <wd@denx.de>
816 commit f12e4549b6fb01cd2654348af95a3c7a6ac161e7
817 Author: Wolfgang Denk <wd@denx.de>
818 Date: Sat Sep 13 02:23:05 2008 +0200
820 Coding style cleanup, update CHANGELOG
822 Signed-off-by: Wolfgang Denk <wd@denx.de>
824 commit 0c32565f536609d78feef35c88bbc39d3ac53a73
825 Author: Peter Tyser <ptyser@xes-inc.com>
826 Date: Wed Sep 10 09:18:34 2008 -0500
828 Update mailing list email and archive addresses
830 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
832 commit fb661ea444ae61de60520f66ae84cdb5dd5a3246
833 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
834 Date: Thu Sep 11 15:40:01 2008 +0200
836 85xx: socrates: autoprobe Lime chip
838 This patch is an attempt to implement autoprobing for the Lime
840 Configure GPCM for Lime CS2 and try to access chip ID registers.
841 Second read atempt delivers register values if the chip is present.
843 Signed-off-by: Anatolij Gustschin <agust@denx.de>
845 commit e99b607a5ec56ce66e0bcccb78480d5e16fb7bc5
846 Author: u-boot@bugs.denx.de <u-boot@bugs.denx.de>
847 Date: Thu Sep 11 15:40:01 2008 +0200
849 85xx: socrates: Add support for new image format.
851 Signed-off-by: Detlev Zundel <dzu@denx.de>
853 commit 3c094b652d4107b34641f300a8e9fe16ca15e3d8
854 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
855 Date: Thu Sep 11 17:28:18 2008 +0900
857 sh: Fix compile error for r2dplus
859 netdev.h was not include by r2dplus.
861 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
863 commit 56844a22b76c719e600047e23b80465a44d76abd
864 Author: Heiko Schocher <hs@denx.de>
865 Date: Thu Sep 11 08:11:23 2008 +0200
867 powerpc: Fix bootm to boot up again with a Ramdisk
869 Commit 2a1a2cb6 didnt remove the dummy mem reservation in fdt_chosen,
870 and this stopped Linux from booting with a Ramdisk. This patch fixes
871 this, by deleting the useless dummy mem reservation.
873 When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD is now
874 added to of_size, so we dont need anymore a dummy mem reservation.
876 I measured the value of FDT_RAMDISK_OVERHEAD on a MPC8270 based
877 system (=0x44 bytes) and rounded it up to 0x80).
879 Signed-off-by: Heiko Schocher <hs@denx.de>
880 Acked-by: Kumar Gala <galak@kernel.crashing.org>
882 commit fc9c1727b5b3483ce49c3cb668e8332fb001b8a7
883 Author: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
884 Date: Mon Sep 8 02:46:13 2008 +0200
886 Add support for LZMA uncompression algorithm.
888 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
889 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
891 commit 0008b6d968160abe2bfd936493f3a516a7c8da20
892 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
893 Date: Fri Jun 27 23:04:20 2008 +0400
895 fsl_elbc_nand: ecclayout cleanups
897 This patch deletes oobavail assignments, they're calculated by the nand
898 core code in nand_scan_tail, plus current oobavail values are wrong for
901 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
902 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
903 Signed-off-by: Scott Wood <scottwood@freescale.com>
905 commit 8f42bf1c393d53a70c2545e9f329d11c46d74794
906 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
907 Date: Fri Jun 27 23:04:13 2008 +0400
909 fsl_elbc_nand: implement support for flash-based BBT
911 This patch implements support for flash-based BBT for chips working
912 through ELBC NAND controller, so that NAND core will not have to re-scan
913 for bad blocks on every boot.
915 Because ELBC controller may provide HW-generated ECCs we should adjust
916 bbt pattern and bbt version positions in the OOB free area.
918 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
919 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
920 Signed-off-by: Scott Wood <scottwood@freescale.com>
922 commit 97ae023648e764f794ffb9c52da109d6caf09c47
923 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
924 Date: Fri Jun 27 23:04:04 2008 +0400
926 fsl_elbc_nand: fix OOB workability for large page NAND chips
928 For large page chips, nand_bbt is looking into OOB area, and checking
929 for "0xff 0xff" pattern at OOB offset 0. That is, two bytes should be
930 reserved for bbt means.
932 But ELBC driver is specifying ecclayout so that oobfree area starts at
933 offset 1, so only one byte left for the bbt purposes.
935 This causes problems with any OOB users, namely JFFS2: after first mount
936 JFFS2 will fill all OOBs with "erased marker", so OOBs will contain:
938 OOB Data: ff 19 85 20 03 00 ff ff ff 00 00 08 ff ff ff ff
939 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
940 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
941 OOB Data: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
943 And on the next boot, NAND core will rescan for bad blocks, then will
944 see "0xff 0x19" pattern, and will mark all blocks as bad ones.
946 To fix the issue we should implement our own bad block pattern: just one
947 byte at OOB start. Though, this will work only for x8 chips. For x16
948 chips two bytes must be checked. Since ELBC driver does not support x16
949 NANDs (yet), we're safe for now.
951 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
952 Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
953 Signed-off-by: Scott Wood <scottwood@freescale.com>
955 commit 7238ada313057a85409485b8ee21515dc10c07a5
956 Author: Wolfgang Denk <wd@denx.de>
957 Date: Fri Sep 12 13:52:21 2008 +0200
959 MPC512x: reduce timeout waiting for Ethernet autonegotiation to 2.5s
961 Signed-off-by: Wolfgang Denk <wd@denx.de>
963 commit b18410e508a12ba0a177dfc2a386857c806fa96d
964 Author: Stefan Roese <sr@denx.de>
965 Date: Thu Sep 11 13:05:56 2008 +0200
967 ppc4xx: Enable device tree (FDT) support in zeus board port
969 Signed-off-by: Stefan Roese <sr@denx.de>
971 commit 7bf5ecfa50722a9feb45ea8f04da75f5d406f20b
972 Author: Stefan Roese <sr@denx.de>
973 Date: Wed Sep 10 16:53:47 2008 +0200
975 ppc4xx: Fix SDRAM inititialization of multiple 405 based board ports
977 This patch fixes a problem introdiced with patch
978 bbeff30c [ppc4xx: Remove superfluous dram_init() call or replace it by
981 The boards affected are:
988 Signed-off-by: Stefan Roese <sr@denx.de>
990 commit 61737c59a3285f6fadf96a5836879898c04ec28d
991 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
992 Date: Thu Sep 11 19:41:26 2008 -0400
994 ppc4xx: Add .gitignore file to xilinx-ppc440 boards
996 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
997 Signed-off-by: Stefan Roese <sr@denx.de>
999 commit 2bec498ed1164a58cd8437b561bdc4551d69f9bf
1000 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1001 Date: Thu Sep 11 19:41:25 2008 -0400
1003 ppc4xx: Fix compilation of v5fx30teval_flash
1005 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1006 Signed-off-by: Stefan Roese <sr@denx.de>
1008 commit 4bed9deebbd7ee6f0ba746b44d47a922156f7404
1009 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1010 Date: Wed Sep 10 17:44:30 2008 -0400
1012 ppc4xx: Fix in-tree build for ppc440-generic boards
1014 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1015 Signed-off-by: Stefan Roese <sr@denx.de>
1017 commit 06c4ab50f5ccfb55ea2dd324aa28b2b06102e416
1018 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1019 Date: Fri Sep 12 02:20:47 2008 +0200
1021 ARM: synchronize mach-types.h with linux 2.6.27-rc6
1023 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1025 commit 3ee9f03f588ad605e3fd10530237f9e3e2e7ab4c
1026 Author: Jens Scharsig <esw@bus-elektronik.de>
1027 Date: Fri Sep 12 02:20:47 2008 +0200
1029 at91rm9200: fix errors with CONFIG_CMD_I2C_TREE
1031 This patch prevents linker error on AT91RM9200 boards, if
1032 CONFIG_CMD_I2_TREE is set.
1033 It implements i2c_set_bus_speed and i2c_get_bus_speed as a dummy function.
1035 Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
1037 commit b5b0344957d32e3d07a8dd72fce64fb48e680ba4
1038 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1039 Date: Fri Sep 12 02:20:47 2008 +0200
1041 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
1043 ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
1045 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1047 commit 03db53335c8eba656a7c44d1555b1a4514383e33
1048 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1049 Date: Fri Sep 12 02:20:46 2008 +0200
1051 make: Remove redundant __ARM__ addition when cross-compiling on *BSD
1053 __ARM__ is given by arm_config.mk automatically.
1055 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
1057 commit 8cc62a7d9c77f8ef5166fb57322c4a6ddac320b4
1058 Author: Claudio Scordino <claudio@evidence.eu.com>
1059 Date: Fri Sep 12 02:20:46 2008 +0200
1061 Fix MACH_TYPE for the AT91RM9200DK board.
1063 Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
1065 commit 274737e5eb25b2bcd3af3a96da923effd543284f
1066 Author: Andrew Dyer <adyer@righthandtech.com>
1067 Date: Fri Sep 12 02:20:46 2008 +0200
1069 i.mx change get_timer(base) to return time since base
1071 This patch changes get_timer() for i.MX to return the time since
1072 'base' instead of the time since the counter was at zero.
1074 Symptom seen is flash timeout errors when erasing or programming a
1075 sector using the common cfi flash code.
1077 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1079 commit 48fed40575b3e8eae960eb0141509ddd9a73012a
1080 Author: Andrew Dyer <adyer@righthandtech.com>
1081 Date: Fri Sep 12 02:20:46 2008 +0200
1083 i.MX use u-boot baud rate and don't assume UART master clock
1085 1) Change the i.MX serial driver to use the baud rate set in the
1088 2) don't assume a 16MHz value for PERCLK1 in baud rate calculations
1090 3) don't write a 1 to the RDR bit in the USR2 reg. (bit is not "write
1091 one to clear" like other status bits in the reg.)
1093 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1095 commit 6e1551a870d360805b9d172dc56d935064abe71d
1096 Author: Andrew Dyer <adyer@righthandtech.com>
1097 Date: Fri Sep 12 02:20:46 2008 +0200
1099 arm920t fix constant error in start.S
1101 Code in cpu/arm920t/start.S will die with a compilation error if
1102 CONFIG_STACKSIZE + CFG_MALLOC_LEN works out to an invalid constant for
1103 the ARM sub instruction. Change the code so that each is subtracted
1104 independently to avoid the error.
1106 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
1108 commit b23253835f871cd9bd8e955b9a971d18a7d4ff56
1109 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
1110 Date: Fri Sep 12 02:20:40 2008 +0200
1112 ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
1114 - Correct Invalid #define of MPUTIM_PTV_MASK for
1115 omap1510 & omap730 register definition
1117 MPUTIM_PTV_MASK is defined as
1118 #define MPUTIM_PTV_MASK (0x7<<PTV_BIT)
1120 while it should have been
1121 #define MPUTIM_PTV_MASK (0x7<<MPUTIM_PTV_BIT)
1123 - Below Patch corrects the same
1125 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
1127 commit c455d07396dddc9864fd8dbb965ee10fe95ce8cf
1128 Author: Adrian Filipi <adrian.filipi@eurotech.com>
1129 Date: Fri Jul 18 11:52:02 2008 -0400
1131 Set up SD/MMC OCR as comment describes. i.e. 3.2-3.4v.
1133 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
1135 commit eb16135df20535b0d19969f50fb5bd17f95e9c25
1136 Author: Guennadi Liakhovetski <lg@denx.de>
1137 Date: Thu Aug 28 12:25:11 2008 +0200
1139 i.MX31: document timer precision option
1141 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1143 commit 1a6337b01351b82a45b0defa76f08744511c580b
1144 Author: Magnus Lilja <lilja.magnus@gmail.com>
1145 Date: Fri Aug 29 10:36:18 2008 +0200
1147 i.MX31: Make the SPI bus and chip select configurable for MC13783
1149 The i.MX31 has three SPI buses and each bus has several chip selects
1150 and the MC13783 chip can be connected to any of these. The current
1151 RTC driver for MC13783 is hardcoded for CSPI2/SS2.
1153 This patch makes make MC13783 SPI bus and chip select configurable
1154 via CONFIG_MC13783_SPI_BUS and CONFIG_MC13783_SPI_CS.
1156 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
1158 commit 8c4ebec25b21e355b8488698ec1594da9701fff4
1159 Author: Magnus Lilja <lilja.magnus@gmail.com>
1160 Date: Fri Aug 29 10:36:17 2008 +0200
1162 i.MX31: Add reset_timer() and modify get_timer_masked().
1164 This patch adds the reset_timer() function (needed by nand_base.c) and
1165 modifies the get_timer_masked() to work in the same way as the omap24xx
1168 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
1170 commit deeec4991a55de243787002ede24d2331d234fc8
1171 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1172 Date: Wed Sep 10 22:48:09 2008 +0200
1174 ap325rxa: remove duplicate CONFIG_FLASH_CFI_DRIVER
1176 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1178 commit a3a08c0cedd329edf5256e1d6b2bad0fca002725
1179 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1180 Date: Wed Sep 10 22:48:09 2008 +0200
1182 bootm arm/avr32/blackfin/microblaze/nios2/sh: remove no more need 'error' label
1184 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1186 commit 0e8d158664a913392cb01fb11a948d83f72e105e
1187 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1188 Date: Wed Sep 10 22:48:06 2008 +0200
1190 rename CFG_ENV macros to CONFIG_ENV
1192 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1194 commit 1ede78710c3bf9ad6f4a53aaddc3bcc86fedd9df
1195 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1196 Date: Wed Sep 10 22:48:05 2008 +0200
1198 nvedit: rename error comment to CONFIG_ENV_IS_IN_
1200 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1202 commit b64b775e7546ed138df360ceb3a71ee358cb9a01
1203 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1204 Date: Wed Sep 10 22:48:05 2008 +0200
1206 cmd_mem: Move conditional compilation to Makefile
1208 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1210 commit 8a40fb148efa442d6526eac46a2001e4c64d28ff
1211 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1212 Date: Wed Sep 10 22:48:05 2008 +0200
1214 move cmd_get_data_size to command.c
1216 add CMD_DATA_SIZE macro to enable it
1218 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1220 commit 507641d2491980531932b9f25dab37fe5e6c3a1a
1221 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1222 Date: Wed Sep 10 22:48:04 2008 +0200
1224 env_flash: Move conditional compilation to Makefile
1226 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1228 commit 5a1aceb0689e2f731491838970884a673ef7e7d3
1229 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1230 Date: Wed Sep 10 22:48:04 2008 +0200
1232 rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH
1234 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1236 commit 7d9b5bae5ba558c7464d89d033aca04acaf01172
1237 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1238 Date: Wed Sep 10 22:48:03 2008 +0200
1240 cleanup use of CFG_ENV_IS_IN_FLASH
1242 - #if CFG_ENV_IS_IN_FLASH
1243 - #if (CFG_ENV_IS_IN_FLASH == 1)
1244 - #define CFG_ENV_IS_IN_FLASH 0
1246 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1248 commit 0cf4fd3cf8d0e00605bec5fc56f89c6415015a46
1249 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1250 Date: Wed Sep 10 22:48:01 2008 +0200
1252 rename environment.c in env_embedded.c to reflect is functionality
1254 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1256 commit c0878af6e32f0fd8e13a6ca315b9add64441115a
1257 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1258 Date: Wed Sep 10 22:48:01 2008 +0200
1260 env_nowhere: Move conditional compilation to Makefile
1262 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1264 commit 93f6d72544da4510a146bc4c93d609b0116cde37
1265 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1266 Date: Wed Sep 10 22:48:00 2008 +0200
1268 rename CFG_ENV_IS_NOWHERE in CONFIG_ENV_IS_NOWHERE
1270 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1272 commit 2556ef78113b5f089dfcac5da90bf31dd568397b
1273 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1274 Date: Wed Sep 10 22:48:00 2008 +0200
1276 env_sf: Move conditional compilation to Makefile
1278 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1280 commit 0b5099a8419bf9c828df5e3e2c6878dc300d98e3
1281 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1282 Date: Wed Sep 10 22:48:00 2008 +0200
1284 rename CFG_ENV_IS_IN_SPI_FLASH in CONFIG_ENV_IS_IN_SPI_FLASH
1286 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1288 commit 55c5f49910ec8225347aa1d211352a84de6649b4
1289 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1290 Date: Wed Sep 10 22:48:00 2008 +0200
1292 env_onenand: Move conditional compilation to Makefile
1294 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1296 commit 9656138ff1a34d4c4768db6b490deffc40ee674b
1297 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1298 Date: Wed Sep 10 22:47:59 2008 +0200
1300 rename CFG_ENV_IS_IN_ONENAND in CONFIG_ENV_IS_IN_ONENAND
1302 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1304 commit 957a0e69575683efd70ace147746bbb3d8e7c501
1305 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1306 Date: Wed Sep 10 22:47:59 2008 +0200
1308 env_nvram: Move conditional compilation to Makefile
1310 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1312 commit 9314cee6917444ab88bd4e758da7a30975120187
1313 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1314 Date: Wed Sep 10 22:47:59 2008 +0200
1316 rename CFG_ENV_IS_IN_NVRAM in CONFIG_ENV_IS_IN_NVRAM
1318 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1320 commit 06f61354397911a4c121dfa51b6ccbf7e300d48b
1321 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1322 Date: Wed Sep 10 22:47:59 2008 +0200
1324 env_nand: Move conditional compilation to Makefile
1326 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1328 commit 51bfee192099206a4397f15f3b93516e01f58ab0
1329 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1330 Date: Wed Sep 10 22:47:58 2008 +0200
1332 rename CFG_ENV_IS_IN_NAND in CONFIG_ENV_IS_IN_NAND
1334 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1336 commit d8cc04d0ac9c7c0d12454708aaf5489f8532bbf9
1337 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1338 Date: Wed Sep 10 22:47:58 2008 +0200
1340 env_dataflash: Move conditional compilation to Makefile
1342 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1344 commit 057c849c45b9ee19df8ff3acdeee66be52819962
1345 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1346 Date: Wed Sep 10 22:47:58 2008 +0200
1348 rename CFG_ENV_IS_IN_DATAFLASH in CONFIG_ENV_IS_IN_DATAFLASH
1350 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1352 commit d1034bc8db60fa6bd419328baf6a75cb0645cee8
1353 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1354 Date: Wed Sep 10 22:47:52 2008 +0200
1356 cmd_eeprom: Move conditional compilation to Makefile
1358 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1360 commit bf5a7710ec70e90e98f451b4ba0eb65f9ffc34eb
1361 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1362 Date: Fri Sep 5 09:19:54 2008 +0200
1364 env_eeprom: Move conditional compilation to Makefile
1366 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1368 commit bb1f8b4f8bb0bfce52e0faa4637b975b745824b3
1369 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1370 Date: Fri Sep 5 09:19:30 2008 +0200
1372 rename CFG_ENV_IS_IN_EEPROM in CONFIG_ENV_IS_IN_EEPROM
1374 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1376 commit 32628c5008105a732212003d83b75f05e5243bb2
1377 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1378 Date: Sat Aug 30 23:54:58 2008 +0200
1380 cmd_mac: Move conditional compilation to Makefile
1382 finish remaning CFG_ID_EEPROM in CONFIG_ID_EEPROM
1383 start in commit ad8f8687b78c3e917b173f038926695383c55555
1385 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1387 commit e5648acab153f0f429bfc714902c5aaa7879f71b
1388 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1389 Date: Sat Aug 30 23:47:41 2008 +0200
1391 cmd_fdc: Move conditional compilation to Makefile
1393 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1395 commit 2d02d91d530e831f2dab228085963fc1d5b71cb0
1396 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1397 Date: Sat Aug 30 23:47:38 2008 +0200
1399 common/Makefile: add core command section
1401 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1403 commit 0d92d4a699fb1a39381d98571dc51fb97e5bcf9e
1404 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1405 Date: Sat Aug 30 23:29:57 2008 +0200
1407 cmd_vfd: Move conditional compilation to Makefile
1409 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1411 commit 6644641d072aee3087da129d8443187196a4d8a9
1412 Author: Scott Wood <scottwood@freescale.com>
1413 Date: Wed Sep 10 11:48:49 2008 -0500
1415 delta, zylonite: Update nand_oobinfo to nand_ecclayout.
1417 This is part of the switch to newer upstream MTD code.
1419 Signed-off-by: Scott Wood <scottwood@freescale.com>
1421 commit 9b05aa788bfdd3264ff1bc9418cb19550a7234e4
1422 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1423 Date: Sat Aug 30 17:06:55 2008 -0400
1425 ARM DaVinci: Fix broken HW ECC for large page NAND.
1427 Based on original patch by Bernard Blackham <bernard@largestprime.net>
1429 U-boot's HW ECC support for large page NAND on Davinci is completely
1430 broken. Some kernels, such as the 2.6.10 one supported by
1431 MontaVista for DaVinci, rely upon this broken behaviour as they
1432 share the same code for ECCs. In the existing scheme, error
1433 detection *might* work on large page, but error correction
1434 definitely does not. Small page ECC correction works, but the
1435 format is not compatible with the mainline git kernel.
1437 This patch adds ECC code that matches what is currently in the
1438 Davinci git repository (since NAND support was added in 2.6.24).
1439 This makes the ECC and OOB layout written by u-boot compatible with
1440 Linux for both small page and large page devices and fixes ECC
1441 correction for large page devices.
1443 The old behaviour can be restored by defining the macro
1444 CFG_DAVINCI_BROKEN_ECC, which is undefined by default.
1446 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
1447 Acked-by: Sergey Kubushyn <ksi@koi8.net>
1448 Signed-off-by: Scott Wood <scottwood@freescale.com>
1450 commit 0b7c5639891f4103a0e31ec7ae0beb3e97ed3836
1451 Author: Heiko Schocher <hs@denx.de>
1452 Date: Wed Sep 10 11:15:28 2008 +0200
1454 muas3001: update BR4 settings
1456 Also set up the port pins for using I2C.
1458 Signed-off-by: Heiko Schocher <hs@denx.de>
1460 commit 3591293509e0c0bcf244b0f974775bff2e25697e
1461 Author: Petri Lehtinen <petri.lehtinen@inoi.fi>
1462 Date: Wed Sep 10 09:43:49 2008 +0300
1464 autoscr: Fix one-character lines and non-newline terminated scripts
1466 When not using hush, the autoscr command now executes lines that are
1467 only one character long. It also runs the last line of scripts even if
1468 it does not end in a newline.
1470 Signed-off-by: Petri Lehtinen <petri.lehtinen@inoi.fi>
1472 commit 9ebbb54f7a25055010fa6668eba40c72a4c4f985
1473 Author: Victor Gallardo <vgallardo@amcc.com>
1474 Date: Tue Sep 9 15:13:29 2008 -0700
1476 ppc4xx: Allow DTT_I2C_DEV_CODE configured by CFG_I2C_DTT_ADDR
1478 On AMCC Arches board DTT_I2C_DEV_CODE is different then canyonlands
1481 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
1483 commit 245f6ef3e11828cb46188e396fb1e67f7b07cd03
1484 Author: Heiko Schocher <hs@denx.de>
1485 Date: Mon Sep 8 10:21:11 2008 +0200
1487 muas3001: added support for the LM75 sensor.
1489 Signed-off-by: Heiko Schocher <hs@denx.de>
1491 commit 4a02a2dca82aeab8f839db9dd35fda9d5412dacb
1492 Author: Heiko Schocher <hs@denx.de>
1493 Date: Mon Sep 8 10:20:19 2008 +0200
1495 muas3001: activate WDT for the muas3001 board.
1497 Signed-off-by: Heiko Schocher <hs@denx.de>
1499 commit a55d074dac24dc941f1afb5b4e94b1509bfdda4e
1500 Author: Heiko Schocher <hs@denx.de>
1501 Date: Mon Sep 8 10:19:36 2008 +0200
1503 muas3001: added 64MB SDRAM autodetection.
1505 Signed-off-by: Heiko Schocher <hs@denx.de>
1507 commit 5251469943895de4bb9a04d5053352cc22acb7d5
1508 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
1509 Date: Thu Aug 21 07:12:26 2008 -0700
1511 Fix printf errors under -DDEBUG
1513 Fix printf format-string/arg mismatches under -DDEBUG.
1515 These warnings occur with DEBUG defined for a platform using
1516 cpu/mpc85xx. Users of other architectures can unearth similar
1517 problems by adding the line "CFLAGS += -DDEBUG=1" in config.mk right
1518 after "CFLAGS += $(call cc-option,-fno-stack-protector)".
1520 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
1521 Signed-off-by: Andy Fleming <afleming@freescale.com>
1523 commit 8b9e4787641719d709bfa2ebeb72e8bd4952bee7
1524 Author: Wolfgang Denk <wd@denx.de>
1525 Date: Tue Sep 9 23:55:18 2008 +0200
1527 Update CHANGELOG, prepare 2008-10-rc1 release
1529 Signed-off-by: Wolfgang Denk <wd@denx.de>
1531 commit e0ff3d350d6b7960deb5a881dfc5acf3a63ef676
1532 Author: Kumar Gala <galak@kernel.crashing.org>
1533 Date: Mon Sep 8 08:51:29 2008 -0500
1535 85xx: Ensure timebase is zero on secondary cores
1537 The e500um says the timebase is volatile out of reset. To ensure
1538 TB sync works we need to make sure its zero.
1540 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1542 commit 54b4ab3c961a2012a1c2a09c259a6343323ec551
1543 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1544 Date: Tue Sep 9 22:18:24 2008 +0200
1546 bootm_load_os: fix load_end debug message
1548 print load_end value not pointer
1550 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1552 commit 1d9af0be764960e6cc1c093e97176c3542796820
1553 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1554 Date: Tue Sep 9 22:18:23 2008 +0200
1556 bootm: enable fdt support only on ppc, m68k and sparc
1558 ...as done in image.c
1560 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1562 commit 748b5274e76f81df85cfcffaffedc323678d0623
1563 Author: Markus Heidelberg <markus.heidelberg@web.de>
1564 Date: Tue Sep 9 18:51:05 2008 +0200
1566 common/cmd_mem.c: remove nested #if defined(CONFIG_CMD_MEMORY)
1568 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1570 commit 650632fe4ca09cfd0e5e6a593f2efc02ef87a58c
1571 Author: Markus Heidelberg <markus.heidelberg@web.de>
1572 Date: Tue Sep 9 17:31:46 2008 +0200
1574 gitignore: add tags files and Vim swap file
1576 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1578 commit 1d9b67b23fca6a25154333733204339802510720
1579 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
1580 Date: Tue Sep 9 17:52:47 2008 +0900
1582 add board_eth_init() for sh7785lcr board
1584 Fix the problem that cannot work RTL8169 on sh7785lcr board.
1586 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
1588 commit 7b7a869a8ba3bd6d9bffb748c91232141330f514
1589 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1590 Date: Wed Aug 6 16:08:41 2008 -0500
1592 mtd: SPI Flash: Support the STMicro Flash
1594 Add MTD SPI Flash support for M25P16, M25P20, M25P32,
1595 M25P40, M25P64, M25P80, M25P128.
1597 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
1598 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
1600 commit 4bc07c368076560ed7fa4c9f987c71a8521488a9
1601 Author: Wolfgang Denk <wd@denx.de>
1602 Date: Tue Sep 9 17:55:31 2008 +0200
1604 trab: fix build problem after change to use do_div()
1606 We must link with libgeneric now.
1608 Signed-off-by: Wolfgang Denk <wd@denx.de>
1610 commit 3b20fd83c73c22acfcb0c6663be747bd5c8b7011
1611 Author: Ryan CHEN <ryan.chen@st.com>
1612 Date: Wed Aug 20 13:00:17 2008 -0400
1614 Correct drv_usb_kbd_init function
1616 The patch is that check if usb_get_dev_index() function return valid
1617 pointer. If valid, continue. Otherwise return -1.
1619 Signed-off-by: Ryan Chen <ryan.chen@st.com>
1620 Acked-by: Markus Klotzbuecher <mk@denx.de>
1622 commit eba1f2fc75f128a9a6c1328d786996a93fd7a707
1623 Author: Remy Bohmer <linux@bohmer.net>
1624 Date: Wed Aug 20 11:22:02 2008 +0200
1626 Make usb-stop() safe to call multiple times in a row.
1628 A recent commit (936897d4d1365452bbbdf8430db5e7769ef08d38)
1629 enabled the usb_stop() command in common/cmd_bootm.c which was
1630 not enabled for some time, because no board did actually set the
1631 CFG_CMD_USB flag. So, now the usb_stop() is executed before
1632 loading the linux kernel.
1634 However, the usb_ohci driver hangs up (at least on AT91SAM) if the
1635 driver is stopped twice (e.g. the peripheral clock is stopped on AT91).
1636 If some other piece of code calls usb_stop() before the bootm command,
1637 this command will hangup the system during boot.
1638 (usb start and stop is typically used while booting from usb memory stick)
1640 But, stopping the usb stack twice is useless anyway, and a flag already
1641 existed that kept track on the usb_init()/usb_stop() calls.
1642 So, we now check if the usb stack is really started before we stop it.
1644 This problem is now fixed in both the upper as low-level layer.
1646 Signed-off-by: Remy Bohmer <linux@bohmer.net>
1647 Acked-by: Markus Klotzbuecher <mk@denx.de>
1649 commit 2c8ccf2728f5e67d991cecf76c4057db75a87b67
1650 Author: Wolfgang Denk <wd@denx.de>
1651 Date: Tue Sep 9 16:55:47 2008 +0200
1653 Makefile: fix bug introduced by commit 47ffd6c2
1655 commit 880f6a5d7596f42db5ff8803b797b78ec5b146e0
1656 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1657 Date: Tue Sep 9 10:00:33 2008 -0400
1659 ppc4xx: ppc440-generic-ALL: Fix out of tree build v2
1661 This patch solves the problems compiling ml507, v5fx30teval and
1662 ppc440-generic out of tree.
1664 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1666 commit 47bebe34ca4e33bab0e822e4ceebbec2590ccbcb
1667 Author: NÃcolas Carneiro Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
1668 Date: Thu Sep 4 15:35:46 2008 -0300
1670 Fix dev_print when called from usb_stor_info (usb storage command)
1672 Fix output of the usb storage command. It was printing "Device 0: not
1673 available" because IF_TYPE_USB was not included into the switch
1676 Signed-off-by: Nicolas Lebedenco <nicolas.lebedenco@tasksistemas.com.br>
1678 commit a4f243452cc8ce0c2c9b51a2520db4bde5f472de
1679 Author: Bartlomiej Sieka <tur@semihalf.com>
1680 Date: Tue Sep 9 12:58:16 2008 +0200
1682 FIT: make iminfo check hashes of all images in FIT, return 1 on failed check
1684 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1686 commit 919f550dc11a13abf01c6bc713c968de790b8d7c
1687 Author: Bartlomiej Sieka <tur@semihalf.com>
1688 Date: Tue Sep 9 12:58:15 2008 +0200
1690 FIT: add ability to check hashes of all images in FIT, improve output
1692 - add function fit_all_image_check_hashes() that verifies if all
1693 hashes of all images in the FIT are valid
1694 - improve output of fit_image_check_hashes() when the hash check fails
1696 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1698 commit 1de1fa408967cef6804bb046b904114519bb36f0
1699 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1700 Date: Mon Sep 8 20:54:39 2008 +0200
1702 qemu_mips: Update linux bootm to support dynamic cmdline
1704 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1706 commit f5ed9e39088ecfa5a5f3ef47b08e5bda7890d764
1707 Author: Peter Tyser <ptyser@xes-inc.com>
1708 Date: Mon Sep 8 14:56:49 2008 -0500
1710 Add support for booting of INTEGRITY operating system uImages
1712 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
1714 commit 72f1b65f1b68bc6ed0d182eda1f3d6cf51b6414a
1715 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1716 Date: Mon Sep 8 21:01:29 2008 +0200
1718 mips/bootm: Fix typo in commit c4f9419c, "initrd_start" replaced by "images->rd_start"
1720 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1722 commit 9ba2e2c8191353d75b2d535e672a125be7b84c03
1723 Author: Kumar Gala <galak@kernel.crashing.org>
1724 Date: Mon Sep 8 13:57:12 2008 -0500
1726 Remove support for booting ARTOS images
1728 Pantelis Antoniou stated:
1729 AFAIK, it is still used but the products using PPC are long gone.
1730 Nuke it plz (from orbit).
1732 So remove it since it cleans up a usage of env_get_char outside of
1733 the environment code.
1735 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
1737 commit 47ffd6c2fc72b46daa9d5d59eedb894fab2b7ee1
1738 Author: Wolfgang Denk <wd@denx.de>
1739 Date: Tue Sep 9 15:45:18 2008 +0200
1741 Makefile: compile and link each module just once
1743 Several source files need to be compiled and linked when one or more
1744 config options are selected. To allow for easy selection in the
1745 Makefiles yet to avoild multiple compilation (which costs build time)
1746 and especially multiple linking (which causes errors), we use
1747 "COBJS = $(sort COBJS-y)" which eliminates duplicates.
1749 By courtesy of Detlev Zundel who suggested this approach.
1751 Signed-off-by: Wolfgang Denk <wd@denx.de>
1753 commit 48d0192fe869948fef14b460b5f0c85bca933693
1754 Author: Andreas Engel <andreas.engel@ericsson.com>
1755 Date: Mon Sep 8 14:30:53 2008 +0200
1757 Moved conditional compile into Makefile
1759 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1761 commit 20c9226cb8cab08a111ee73db04e62d943ee0c97
1762 Author: Andreas Engel <andreas.engel@ericsson.com>
1763 Date: Mon Sep 8 10:17:31 2008 +0200
1765 Merged serial_pl010.c and serial_pl011.c.
1767 They only differ in the init function.
1768 This also adds the missing watchdog support for the PL011.
1770 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
1772 commit 0817d688f307ee2c0598e79175c94a40ce90337b
1773 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1774 Date: Sun Sep 7 17:10:27 2008 -0400
1776 Remove gap fill in srec object v2
1778 SREC files do not need gap fill: The load address is specified in the
1779 file. On the other hand, it can't be avoided in a .bin object. It has
1780 no information about memory location.
1782 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
1784 commit 1dc306931ca5ce87f13916fa7165b052d3aa714f
1785 Author: Markus Heidelberg <markus.heidelberg@web.de>
1786 Date: Sun Sep 7 20:18:27 2008 +0200
1788 README: fix missing subdirectory in the documentation
1790 Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
1792 commit 3ef96ded38a8d33b58b9fab9cd879d51ddac4cbd
1793 Author: Graeme Russ <graeme.russ@gmail.com>
1794 Date: Sun Sep 7 07:08:42 2008 +1000
1796 Update i386 code (sc520_cdp)
1798 Attempt to bring i386 / sc520 inline with master
1800 Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
1802 commit 5608692104efa8d56df803dc79ea41ac3607eee5
1803 Author: Guennadi Liakhovetski <lg@denx.de>
1804 Date: Thu Sep 4 13:01:49 2008 +0200
1806 fw_env: add NAND support
1808 Add support for environment in NAND with automatic NOR / NAND recognition,
1809 including unaligned environment, bad-block skipping, redundant environment
1812 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
1814 commit dd794323a2a1ed6a8a5df51785c31bcde60ad7ca
1815 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1816 Date: Tue Sep 9 09:50:24 2008 +0200
1818 ppc4xx: Fix out-of-tree building of CPCI405 variants
1820 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1821 Acked-by: Stefan Roese <sr@denx.de>
1823 commit 59f630588e3fdbd698a0a2798e52a8924e899563
1824 Author: Sergei Poselenov <sposelenov@emcraft.com>
1825 Date: Fri Aug 15 15:42:11 2008 +0200
1827 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
1829 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1831 commit e64987a892353f3d49eb242d997820ef8f538912
1832 Author: Anatolij Gustschin <agust@denx.de>
1833 Date: Fri Aug 15 15:42:13 2008 +0200
1835 85xx: socrates: Enable Lime support.
1837 This patch adds Lime GDC support together with support for the PWM
1838 backlight control through the w83782d chip. The reset pin of the
1839 latter is attached to GPIO, so we need to reset it in
1842 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1844 commit 3e79b588b5199f35016f178fc0d5d1266382097f
1845 Author: Detlev Zundel <dzu@denx.de>
1846 Date: Fri Aug 15 15:42:12 2008 +0200
1848 85xx: Socrates: Major code update.
1850 - Update the local bus ranges in the FDT for Linux for the various
1851 devices connected to the local bus via chip-select.
1853 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
1854 lower than 66 MHz and uses I/O accessor functions consequently.
1858 - Update of default environment and configuration. Use I2C multibus
1859 as we do have two I2C buses. Also enable sdram and ext2 commands.
1861 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1862 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1863 Signed-off-by: Detlev Zundel <dzu@denx.de>
1865 commit e8d18541c6ceab821f75faab031740b33fdbfa4b
1866 Author: Timur Tabi <timur@freescale.com>
1867 Date: Fri Jul 18 16:52:23 2008 +0200
1869 Update Freescale 85xx boards to sys_eeprom.c
1871 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
1872 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
1873 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
1874 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
1876 Signed-off-by: Timur Tabi <timur@freescale.com>
1878 commit aab2bf0202c86227e3dcc8a5b58946087ebcc1af
1879 Author: Wolfgang Denk <wd@denx.de>
1880 Date: Tue Sep 9 10:08:02 2008 +0200
1882 lib_ppc/interrupts.c: make board_show_activity() a weak function
1884 This allows to use show_activity() without having to
1885 define an empty board_show_activity() function.
1887 Signed-off-by: Wolfgang Denk <wd@denx.de>
1889 commit fe876787f8743883ce58fed61525eaa2f34da4c5
1890 Author: Wolfgang Denk <wd@denx.de>
1891 Date: Tue Sep 9 10:06:44 2008 +0200
1893 stxxtc: remove empty CONFIG_SHOW_ACTIVITY functions
1895 Signed-off-by: Wolfgang Denk <wd@denx.de>
1897 commit 965de106ba8900372c8b16dc60d5acab7f925e38
1898 Author: Wolfgang Denk <wd@denx.de>
1899 Date: Tue Sep 9 10:03:47 2008 +0200
1901 NETTA2: remove empty CONFIG_SHOW_ACTIVITY functions
1903 Signed-off-by: Wolfgang Denk <wd@denx.de>
1905 commit 6cc64f9b5f69239c8b1969572b5a3a4aab7de5b9
1906 Author: Sergei Poselenov <sposelenov@emcraft.com>
1907 Date: Fri Aug 15 15:42:11 2008 +0200
1909 Removed hardcoded MxMR loop value from upmconfig() for MPC85xx.
1911 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1913 commit 36241ca29d4804a1006fb3f26069effda5202581
1914 Author: Anatolij Gustschin <agust@denx.de>
1915 Date: Fri Aug 15 15:42:13 2008 +0200
1917 85xx: socrates: Enable Lime support.
1919 This patch adds Lime GDC support together with support for the PWM
1920 backlight control through the w83782d chip. The reset pin of the
1921 latter is attached to GPIO, so we need to reset it in
1924 Signed-off-by: Anatolij Gustschin <agust@denx.de>
1926 commit 7a47753ddcaebbf2142809842f70c5f723bd9ddb
1927 Author: Detlev Zundel <dzu@denx.de>
1928 Date: Fri Aug 15 15:42:12 2008 +0200
1930 85xx: Socrates: Major code update.
1932 - Update the local bus ranges in the FDT for Linux for the various
1933 devices connected to the local bus via chip-select.
1935 - Set the LCRR_DBYP bit in the LCRR for local bus frequencies
1936 lower than 66 MHz and uses I/O accessor functions consequently.
1940 - Update of default environment and configuration. Use I2C multibus
1941 as we do have two I2C buses. Also enable sdram and ext2 commands.
1943 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
1944 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1945 Signed-off-by: Detlev Zundel <dzu@denx.de>
1947 commit 4d2ae70e8c31c22e5710df5ff236b5565ea2cf2c
1948 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1949 Date: Tue Sep 9 01:22:39 2008 +0200
1951 disk-on-chip: remove duplicate doc_probe declaration
1953 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1955 commit 3221b074a0ab199f6ae47c19cc22f42ddf3ef819
1956 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1957 Date: Tue Sep 9 00:59:40 2008 +0200
1959 onenand_uboot: fix warning: 'struct mtd_oob_ops' declared inside parameter list
1961 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1963 commit 13b4db0e2107175a8622ebb48529fa3ad8e12c75
1964 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1965 Date: Tue Sep 9 00:59:39 2008 +0200
1967 rs5c372: fix rtc_set prototype
1969 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
1971 commit 1bb8b2ef2722bbaea3cc5d46321ce1d99f9b56f7
1972 Author: Sergei Poselenov <sposelenov@emcraft.com>
1973 Date: Thu Aug 14 14:08:28 2008 +0200
1975 ARM: fix warning: target CPU does not support interworking
1977 This patch fixes warnings like this:
1979 start.S:0: warning: target CPU does not support interworking
1981 which come from some ARM cross compilers and are caused by hard-coded
1982 (with "--with-cpu=arm9" configuration option) ARM targets (which
1983 support ARM Thumb instructions), while the ARM target selected from
1984 the command line (with "-march=armv4") doesn't support Thumb
1987 This warning is issued by the compiler regardless of the real use of
1988 the Thumb instructions in code.
1990 To fix this problem, we use options according to compiler version
1993 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
1994 Signed-off-by: Wolfgang Denk <wd@denx.de>
1996 commit 4265c35fbcb248e58179007621d61d32d0b3b82a
1997 Author: Sergei Poselenov <sposelenov@emcraft.com>
1998 Date: Thu Aug 14 14:08:28 2008 +0200
2000 ARM: Use do_div() instead of division for "long long".
2002 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
2003 Signed-off-by: Wolfgang Denk <wd@denx.de>
2005 commit 8febd13c69cb68652577d1a9fcbde954bf784155
2006 Author: Timur Tabi <timur@freescale.com>
2007 Date: Fri Jul 18 16:52:23 2008 +0200
2009 Update Freescale 85xx boards to sys_eeprom.c
2011 The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID
2012 format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale
2013 86xx boards already use sys_eeprom.c, so this patch migrates the remaining
2014 Freescale 85xx boards to use it as well. cds_eeprom.c is deleted.
2016 Signed-off-by: Timur Tabi <timur@freescale.com>
2018 commit 1055171ed05b7c4885737463d52b8d6c013bcb5d
2019 Author: Wolfgang Denk <wd@denx.de>
2020 Date: Mon Sep 8 23:26:22 2008 +0200
2022 lib_arm/bootm.c: fix compile warnings
2024 bootm.c:128: warning: label 'error' defined but not used
2025 bootm.c:65: warning: unused variable 'ret'
2027 Signed-off-by: Wolfgang Denk <wd@denx.de>
2029 commit 2e3c867d0a63c563a51e65b776973b008f16cec5
2030 Author: Wolfgang Denk <wd@denx.de>
2031 Date: Mon Sep 8 22:46:42 2008 +0200
2033 ml507: fix out of tree build problem
2035 Signed-off-by: Wolfgang Denk <wd@denx.de>
2037 commit 9863a15a98f23b79f34a0e4f9e465bc6df5d504d
2038 Author: Wolfgang Denk <wd@denx.de>
2039 Date: Mon Sep 8 22:10:28 2008 +0200
2041 common/cmd_bootm.c: fix printf() format warnings
2043 Signed-off-by: Wolfgang Denk <wd@denx.de>
2045 commit 4394f9a8c42bb1b0abc4fc04bd582d4db5f8b726
2046 Author: Wolfgang Denk <wd@denx.de>
2047 Date: Mon Sep 8 22:37:45 2008 +0200
2049 BMW, PCIPPC2, PCIPPC6, RBC82: fix compile warnings
2051 missing doc_probe() prototype.
2053 Signed-off-by: Wolfgang Denk <wd@denx.de>
2055 commit 2c5e3cc4994897d364b148942ff23e47783198f6
2056 Author: Wolfgang Denk <wd@denx.de>
2057 Date: Mon Sep 8 21:28:14 2008 +0200
2059 mk48t59: fix compile problem introduced by commit d1e23194
2061 Signed-off-by: Wolfgang Denk <wd@denx.de>
2063 commit 5ff889349d2ace13f10c9335e09365fcec8247cc
2064 Author: Stefan Roese <sr@denx.de>
2065 Date: Mon Sep 8 14:11:12 2008 +0200
2067 ppc4xx: Move ppc4xx specific prototypes to ppc4xx header
2069 This patch moves some 4xx specific prototypes out of include common.h
2070 to a ppc4xx specific header.
2072 Signed-off-by: Stefan Roese <sr@denx.de>
2074 commit ac53ee8318678190bf3c68da477a84a657d86fb0
2075 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2076 Date: Fri Sep 5 15:34:04 2008 +0200
2078 ppc4xx: Update CPCI405(AB) configuration
2080 This patch add FDT support and command line editing capabilities
2081 for CPCI405 and CPCI405AB boards.
2083 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2084 Signed-off-by: Stefan Roese <sr@denx.de>
2086 commit 7b1fbcadf73a83b3beb94abccda1c35e2c075a94
2087 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2088 Date: Fri Sep 5 15:34:03 2008 +0200
2090 ppc4xx: Cleanup CPCI405 linker script
2092 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2093 Signed-off-by: Stefan Roese <sr@denx.de>
2095 commit 767f9159c5c94cd0cb3135b5b82814ad12816ddf
2096 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2097 Date: Fri Sep 5 15:34:02 2008 +0200
2099 ppc4xx: Update CPCI405 variants handling
2101 This patch replaces the BOARD_REVISION variable in include/config.mk
2102 by a using a temporary include file in the platform directory.
2104 The former way does not work anymore and the latter is also used by
2107 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2108 Signed-off-by: Stefan Roese <sr@denx.de>
2110 commit f071f01fd09e9bf1cf09de37a7416aacce71bae1
2111 Author: Stefan Roese <sr@denx.de>
2112 Date: Mon Sep 8 10:01:48 2008 +0200
2114 ppc4xx: Remove CONFIG_CS8952_PHY define
2116 Since this define is only used on one board that was never really in
2117 production, removing this compile time option doesn't hurt and makes
2118 the code more readable.
2120 Signed-off-by: Stefan Roese <sr@denx.de>
2122 commit 6ca8646c1860bba74326bf916a5a3389a5c0d3b5
2123 Author: Stefan Roese <sr@denx.de>
2124 Date: Fri Sep 5 14:11:40 2008 +0200
2126 ppc4xx: Fix compilation warning for PIP405
2128 This patch fixes a compilation warning for the PIP405 board. It moves the
2129 #ifndef CONFIG_CS8952_PHY define a little so that the warning doesn't
2130 occur anymore. I am a little unsure if this #ifdef is at the correct
2131 place now or if it could be removed completely. This needs to get
2132 tested on the PIP405 board.
2134 Signed-off-by: Stefan Roese <sr@denx.de>
2136 commit 725b53ac61f4df3026b8f6489ef0080fd27d3816
2137 Author: Stefan Roese <sr@denx.de>
2138 Date: Fri Sep 5 14:09:09 2008 +0200
2140 ppc4xx: Fix compilation warning for canyonlands & glacier
2142 Signed-off-by: Stefan Roese <sr@denx.de>
2144 commit 302e52e0b1d4c7f994991709d0cb6c3ea612cdb5
2145 Author: Kumar Gala <galak@kernel.crashing.org>
2146 Date: Fri Sep 5 14:40:29 2008 -0500
2148 Fix compiler warning in mpc8xxx ddr code
2150 ctrl_regs.c: In function 'compute_fsl_memctl_config_regs':
2151 ctrl_regs.c:523: warning: 'caslat' may be used uninitialized in this function
2152 ctrl_regs.c:523: note: 'caslat' was declared here
2154 Add a warning in DDR1 case if cas_latency isn't a value we know about.
2156 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2157 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2159 commit d1e2319414ea5218ba801163e4530ecf2dfcbf36
2160 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2161 Date: Mon Sep 1 23:06:23 2008 +0200
2163 rtc: allow rtc_set to return an error and use it in cmd_date
2165 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2167 commit ee9536a28cb149bcb6c5dee9d08c62c91f4c72d2
2168 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2169 Date: Mon Sep 1 01:16:33 2008 +0200
2171 ap325rxa/favr-32-ezkit: Use CONFIG_FLASH_CFI_DRIVER
2173 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2175 commit 6b971c73f182248ce103503d74fbc0100bb8c8b7
2176 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2177 Date: Sun Aug 31 05:37:04 2008 +0900
2179 config.mk: Move arch-specific condition to $(ARCH)_config.mk
2181 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
2183 commit ea86b9e64b811753d9eabe0f560ee189fbe5d0c1
2184 Author: Kumar Gala <galak@kernel.crashing.org>
2185 Date: Fri Aug 29 19:08:29 2008 -0500
2187 Prevent crash if random/invalid ramdisks are passed to bootm
2189 Adds returning an error from the ramdisk detection code if
2190 its not a real ramdisk (invalid). There is no reason we can't
2191 just return back to the console if we detect an invalid
2192 ramdisk or CRC error.
2194 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2196 commit 8e02494e8f86c8f2d7324b5eb9e75271104a01ef
2197 Author: Anatolij Gustschin <agust@denx.de>
2198 Date: Fri Aug 29 21:04:45 2008 +0200
2200 Prevent crash if random DTB address is passed to bootm
2202 This patch adds bootm_start() return value check. If
2203 error status is returned, we do not proceed further to
2204 prevent board reset or crash as we still can recover
2207 Signed-off-by: Anatolij Gustschin <agust@denx.de>
2209 commit cc347801add2689b1ee54d21f62bc14ecf6e1dd8
2210 Author: Andrew Dyer <adyer@righthandtech.com>
2211 Date: Fri Aug 29 12:30:39 2008 -0500
2213 clean up some #if !defined() in drivers/video/cfb_console.c
2215 rearrange some #if !defined() / #else / #endif statements to remove
2218 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
2220 commit c83f4c2d77f07174dcd6bef7e87a0f7017be7c33
2221 Author: Kyungmin Park <kmpark@infradead.org>
2222 Date: Fri Aug 29 09:02:20 2008 +0900
2224 apollon: use the last memory area for u-boot
2226 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2228 commit a6f2e455b774d0c5d56e44e5661df9adb69b6e07
2229 Author: Heiko Schocher <hs@denx.de>
2230 Date: Thu Aug 28 13:50:42 2008 +0200
2232 TQM8272: move NAND part in seperate File
2234 I didn't try to use drivers/mtd/nand/fsl_upm.c for the NAND driver,
2235 because I have no longer access to the hardware.
2237 Signed-off-by: Heiko Schocher <hs@denx.de>
2239 commit 584f979f7ee914e32d408739cbdd2c4457ec18b8
2240 Author: Heiko Schocher <hs@denx.de>
2241 Date: Thu Aug 28 13:48:36 2008 +0200
2243 TQM8272: Fix compiling error for the TQM8272 board.
2245 Fix compile problems caused by
2246 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
2248 Signed-off-by: Heiko Schocher <hs@denx.de>
2250 commit 1a7f8ccec981648ccd38fca2535490582eee08e6
2251 Author: Kyungmin Park <kmpark@infradead.org>
2252 Date: Wed Aug 27 14:45:20 2008 +0900
2254 Add JFFS2 command support on OneNAND
2256 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2258 commit f5c3ba79788b0e39baab7026d374fe375dd1a43f
2259 Author: Mark Jackson <mpfj@mimc.co.uk>
2260 Date: Mon Aug 25 19:21:30 2008 +0100
2262 Allow console input to be disabled
2264 Added new CONFIG_DISABLE_CONSOLE define and GD_FLG_DISABLE_CONSOLE.
2266 When CONFIG_DISABLE_CONSOLE is defined, setting
2267 GD_FLG_DISABLE_CONSOLE disables all console input and output.
2269 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
2271 commit 2b22d608f370565c87f55928b524207031419c11
2272 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2273 Date: Wed Jul 30 12:39:29 2008 +0200
2275 loads: allow negative offsets
2277 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2279 commit e90fb6afab2c0c074dfb67bacb4de179eb188a24
2280 Author: Yuri Tikhonov <yur@emcraft.com>
2281 Date: Thu Sep 4 11:19:05 2008 +0200
2283 USB EHCI: reset root hub
2285 Some of multi-function USB controllers (e.g. ISP1562) allow root hub
2286 resetting only via EHCI registers. So, this patch adds the
2287 corresponding kind of reset to OHCI's hc_reset() if the newly
2288 introduced CONFIG_PCI_EHCI_DEVNO option is set (e.g. for Socrates
2291 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2292 Acked-by: Markus Klotzbuecher <mk@denx.de>
2294 commit 5875d358f025c1b042d8a0f08384b756de7256c9
2295 Author: Yuri Tikhonov <yur@emcraft.com>
2296 Date: Fri Aug 15 15:42:09 2008 +0200
2298 RX 8025 RTC: analyze 12/24-hour mode flag in rtc_get().
2300 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2302 commit 3e3c026ed746a284c6f0ef139b26d859939de7e9
2303 Author: Stefan Roese <sr@denx.de>
2304 Date: Fri Sep 5 10:47:46 2008 +0200
2306 devices: Use list_add_tail() instead of list_add() to register a device
2308 This patch fixes a problem spotted on Glacier/Canyonlands (and most
2309 likely lots of other board ports), that no serial output was seen
2310 after console initialization in console_init_r(). This is because the
2311 last added console device was used instead of the first added.
2313 This patch fixes this problem by using list_add_tail() instead of
2314 list_add() to register a device. This way the first added console
2317 Signed-off-by: Stefan Roese <sr@denx.de>
2319 commit 78d78236896d62bb8ca7302af38d8f1493eb2651
2320 Author: Victor Gallardo <vgallardo@amcc.com>
2321 Date: Thu Sep 4 23:49:36 2008 -0700
2323 ppc4xx: Add support for GPCS, SGMII and M88E1112 PHY
2325 This patch adds GPCS, SGMII and M88E1112 PHY support
2326 for the AMCC PPC460GT/EX processors.
2328 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
2329 Signed-off-by: Stefan Roese <sr@denx.de>
2331 commit f6b6c45840f9b4671d2d97243a12a1f3ffb64765
2332 Author: Adam Graham <agraham@amcc.com>
2333 Date: Wed Sep 3 12:26:59 2008 -0700
2335 ppc4xx: Update Kilauea to use PPC4xx DDR autocalibration routines
2337 Signed-off-by: Adam Graham <agraham@amcc.com>
2338 Signed-off-by: Stefan Roese <sr@denx.de>
2340 commit 075d0b81e896e8735ae26372cd384f87cbd24e41
2341 Author: Adam Graham <agraham@amcc.com>
2342 Date: Wed Sep 3 12:26:28 2008 -0700
2344 ppc4xx: IBM Memory Controller DDR autocalibration routines
2346 Alternate SDRAM DDR autocalibration routine that can be generically used
2347 for any PPC4xx chips that have the IBM SDRAM Controller core allowing for
2348 support of more DIMM/memory chip vendors and gets the DDR autocalibration
2349 values which give the best read latency performance (SDRAM0_RDCC.[RDSS]).
2351 Two alternate SDRAM DDR autocalibration algoritm are provided in this patch,
2352 "Method_A" and "Method_B". DDR autocalibration Method_A scans the full range
2353 of possible PPC4xx SDRAM Controller DDR autocalibration values and takes a
2354 lot longer to run than Method_B. Method_B executes in the same amount of time
2355 as the currently existing DDR autocalibration routine, i.e. 1 second or so.
2356 Normally Method_B is used and it is set as the default method.
2358 The current U-Boot PPC4xx DDR autocalibration code calibrates the IBM SDRAM
2359 Controller registers.[bit-field]:
2360 1) SDRAM0_RQDC.[RQFD]
2361 2) SDRAM0_RFDC.[RFFD]
2363 This alternate PPC4xx DDR autocalibration code calibrates the following
2364 IBM SDRAM Controller registers.[bit-field]:
2366 1) SDRAM0_WRDTR.[WDTR]
2367 2) SDRAM0_CLKTR.[CKTR]
2368 3) SDRAM0_RQDC.[RQFD]
2369 4) SDRAM0_RFDC.[RFFD]
2371 and will also use the calibrated settings of the above four registers that
2372 produce the best "Read Sample Cycle Select" value in the SDRAM0_RDCC.[RDSS]
2373 register.[bit-field].
2375 Signed-off-by: Adam Graham <agraham@amcc.com>
2376 Signed-off-by: Stefan Roese <sr@denx.de>
2378 commit e07f4a8033b6270b8103049adb6456f660ff4a89
2379 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2380 Date: Mon Sep 1 13:09:39 2008 -0400
2382 ppc44x: Unification of virtex5 pp440 boards
2384 This patch provides an unificated way of handling xilinx v5 ppc440 boards.
2386 It unificates 3 different things:
2389 A new board called ppc440-generic has been created. This board includes
2390 a generic tlb initialization (Maps the whole memory into virtual) and
2391 defines board_pre_init, checkboard, initdram and get_sys_info weakly,
2392 so, they can be replaced by specific functions.
2394 If a new board needs to redefine any of the previous functions
2395 (specific initialization) it can create a new directory with the
2396 specific initializations needed. (see the example ml507 board).
2398 2) Configuration file
2399 Common configurations are located under configs/xilinx-ppc440.h, this
2400 header file interpretes the xparameters file generated by EDK and
2401 configurates u-boot in correspondence. Example: if there is a Temac,
2402 allows CMD_CONFIG_NET
2403 Specific configuration are located under specific configuration file.
2404 (see the example ml507 board)
2407 Some work has been done in order to not duplicate work in the Main
2408 Makefile. Please see the attached code.
2410 In order to support new boards they can be implemented in the next way:
2412 a) Simple Generic Board (90% of the time)
2413 Using EDK generates a new xparameters.h file, replace
2414 ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config
2417 b) Simple Boards with special u-boot parameters (9 % of the time)
2418 Create a new file under configs for it (use ml507.h as example) and
2419 change your paramaters. Create a new Makefile paragraph and compile
2421 c) Complex boards (1% of the time)
2422 Create a new folder for the board, like the ml507
2424 Finally, it adds support for the Avnet FX30T Evaluation board, following
2425 the new generic structure:
2427 Cheap board by Avnet for evaluating the Virtex5 FX technology.
2429 This patch adds support for:
2434 Prior using U-boot in this board, read carefully the ERRATA by Avnet
2435 to solve some memory initialization issues.
2437 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
2438 Signed-off-by: Stefan Roese <sr@denx.de>
2440 commit 64ac1eb5afafced49b327425ad1814b2dc422d6e
2441 Author: Nick Spence <nick.spence@freescale.com>
2442 Date: Tue Sep 2 15:21:16 2008 -0500
2444 mpc83xx: fix mpc8313 in-tree building with NAND
2446 and add mpc8313 NAND build to MAKEALL
2448 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2449 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2451 commit 6eb2a44e27919fdc601e0c05404b298a7602c0e3
2452 Author: Nick Spence <nick.spence@freescale.com>
2453 Date: Thu Aug 28 14:09:25 2008 -0700
2455 mpc83xx: clean up cache operations and unlock_ram_in_cache() functions
2457 Cleans up some latent issues with the data cache control so that
2458 dcache_enable() and dcache_disable() will work reliably (after
2459 unlock_ram_in_cache() has been called)
2461 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2462 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2464 commit 46497056ae3b1e81e736e9cf3a170472c5d9719f
2465 Author: Nick Spence <nick.spence@freescale.com>
2466 Date: Thu Aug 28 14:09:19 2008 -0700
2468 mpc83xx: Store and display Arbiter Event Register values
2470 Record the Arbiter Event Register values and optionally display them.
2472 The Arbiter Event Register can record the type and effective address of
2473 an arbiter error, even through an HRESET. This patch stores the values in
2474 the global data structure.
2476 Display of the Arbiter Event registers immediately after the RSR value
2477 can be enabled with defines. The Arbiter values will only be displayed
2478 if an arbiter event has occured since the last Power On Reset, and either
2479 of the following defines exist:
2480 #define CONFIG_DISPLAY_AER_BRIEF - display only the arbiter address and
2481 and type register values
2482 #define CONFIG_DISPLAY_AER_FULL - display and interpret the arbiter
2483 event register values
2485 Address Only transactions are one of the trapped events that can register
2486 as an arbiter event. They occur with some cache manipulation instructions
2487 if the HID0_ABE (Address Broadcast Enable) is set and the memory region
2488 has the MEMORY_COHERENCE WIMG bit set. Setting:
2489 #define CONFIG_MASK_AER_AO - prevents the arbiter from recording address
2490 only events, so that it can still capture
2491 other real problems.
2493 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2494 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2496 commit ade50c7fa1b16ef98be17e9c3ae286aecf4f5605
2497 Author: Nick Spence <nick.spence@freescale.com>
2498 Date: Thu Aug 28 14:09:11 2008 -0700
2500 mpc83xx: use r4 instead of r2 in lock_ram_in_cache and unlock_ram_in_cache
2502 This is needed in unlock_ram_in_cache() because it is called from C and
2503 will corrupt the small data area anchor that is kept in R2.
2505 lock_ram_in_cache() is modified similarly as good coding practice, but
2506 is not called from C.
2508 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2509 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2511 commit d9fe88173cb4f7d293796ffe10c7a0d3d426d8f9
2512 Author: Nick Spence <nick.spence@freescale.com>
2513 Date: Fri Aug 22 23:52:50 2008 -0700
2515 MPC83XX: Fix GPIO configuration - set gpio level before direction
2517 Set DAT value before DIR values to avoid creating glitches on the
2520 Set gpio level register before direction register to inhibit
2521 glitches on high level output pins.
2523 Dir and data gets cleared at powerup, so high level output lines see
2524 a short low pulse between setting the direction and level registers.
2526 Issue was seen on a new board with the nReset line of the NOR flash
2527 connected to a GPIO. Setting the direction register puts the NOR flash
2528 in reset so the next instruction to set the level cannot get executed.
2530 Signed-off-by: Nick Spence <nick.spence@freescale.com>
2531 Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2532 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2534 commit 7007c5975ee900ad70983b0681d3251e221f8321
2535 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2536 Date: Tue Sep 2 02:58:32 2008 +0200
2538 doc/qemu_mips: add doc howto debug u-boot with gdb
2540 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2542 commit 7deb3b3ecd0e81ef09bb68aa0ec2346f4ae0a405
2543 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2544 Date: Wed Sep 3 17:15:45 2008 +0200
2546 ppx4xx: Fix broken DASA_SIM board
2548 This patch adds initdram() to DASA_SIM boards that has been
2549 removed accidentally by a previous commit.
2551 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2552 Signed-off-by: Stefan Roese <sr@denx.de>
2554 commit 7e410aa30fbcb1d19a26bbf1e84a9ca6102d534b
2555 Author: Stefan Roese <sr@denx.de>
2556 Date: Mon Sep 1 08:35:37 2008 +0200
2558 ppc4xx: Remove reference to common/lists.o from some esd linker scripts
2560 This patch removes some direct references to common/lists.o from some
2561 esd linker scripts. This is necessary because the lists source was moved
2562 and is not in the "common" directory anymore.
2564 Signed-off-by: Stefan Roese <sr@denx.de>
2566 commit 97b0734d65f8a0b03df0a335a2addc759da56107
2567 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2568 Date: Tue Sep 2 16:33:05 2008 +0200
2570 ppc4xx: Remove obsolete or unused functions from some esd boards
2572 This patch removes initdram() and testdram() from most esd 405 platforms.
2573 Some boards also have an empty dummy implementation of
2574 misc_init_f(). This is also removed.
2576 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2577 Signed-off-by: Stefan Roese <sr@denx.de>
2579 commit 1092ce218c514e5ccb18450ac5af501d96d6e3e9
2580 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2581 Date: Tue Sep 2 15:07:54 2008 +0200
2583 ppc4xx: Update VOM405 board configuration
2586 - add command line editing
2589 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2590 Signed-off-by: Stefan Roese <sr@denx.de>
2592 commit 830c800e28e96ec7c3c6936a0bd1b9461f3e77d4
2593 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2594 Date: Tue Sep 2 15:07:53 2008 +0200
2596 ppc4xx: Remove obsolete initdram() function from VOM405 board
2598 This patch removed the obsolete initdram() function from
2599 VOM405 platform file.
2603 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2604 Signed-off-by: Stefan Roese <sr@denx.de>
2606 commit 3d4dd7a941b2327b8c2fc535b782ca307ff8b6c8
2607 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2608 Date: Tue Sep 2 15:07:52 2008 +0200
2610 ppc4xx: Cleanup VOM405 linker script
2612 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2613 Signed-off-by: Stefan Roese <sr@denx.de>
2615 commit fcaffd597f6f5191b12ca66c2a4789bbdeea85c2
2616 Author: Matthias Fuchs <mf@esd.eu>
2617 Date: Tue Sep 2 15:07:51 2008 +0200
2619 ppc4xx: Add fdt support for VOM405 boards
2621 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2622 Signed-off-by: Stefan Roese <sr@denx.de>
2624 commit 9ec367aa2c5dcf79558aa2b209b45d7686654c14
2625 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2626 Date: Tue Sep 2 11:36:14 2008 +0200
2628 ppc4xx: Coding style cleanup
2630 Wrap long lines etc.
2632 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2633 Signed-off-by: Stefan Roese <sr@denx.de>
2635 commit 17e65c21adfb63980e6aff80bfbd2df0eeb12060
2636 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2637 Date: Tue Sep 2 11:35:56 2008 +0200
2639 ppc4xx: Enable USB on PLU405 boards
2641 This patch enables the PCI-OHCI controller on PLU405 board.
2643 Also the default CPU frequency is updated to 266 MHz and
2644 command line editing is enabled.
2646 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2647 Signed-off-by: Stefan Roese <sr@denx.de>
2649 commit 40e43e3b87d57b2ac786e27f6e25a7df9940d93b
2650 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2651 Date: Tue Sep 2 11:35:35 2008 +0200
2653 ppc4xx: Cleanup PLU405 platform file
2656 - wraps some long lines
2657 - removes unused/obsolete functions: misc_init_f() and initdram()
2659 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2660 Signed-off-by: Stefan Roese <sr@denx.de>
2662 commit d74cdb1d0614ab78128e0735a51e7988a7b7ea33
2663 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2664 Date: Tue Sep 2 11:35:04 2008 +0200
2666 ppc4xx: Cleanup PLU405 linker script
2668 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2669 Signed-off-by: Stefan Roese <sr@denx.de>
2671 commit 3bc1054cec2f6b25822f301ea922a16233baa4c7
2672 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2673 Date: Tue Sep 2 11:34:36 2008 +0200
2675 ppc4xx: Add fdt support for PLU405 boards
2677 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2678 Signed-off-by: Stefan Roese <sr@denx.de>
2680 commit 5a3e480b783bfbc139586293a54fb875d7c5c5d4
2681 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2682 Date: Tue Sep 2 11:34:08 2008 +0200
2684 ppc4xx: Increase U-Boot size to 384kB for PLU405 boards
2686 Signed-off-by: Matthias Fuchs <mf@esd.eu>
2687 Signed-off-by: Stefan Roese <sr@denx.de>
2689 commit be1b0d2777e179191a57b138b660547a17e55aad
2690 Author: Jochen Friedrich <jochen@scram.de>
2691 Date: Tue Sep 2 11:24:59 2008 +0200
2693 Don't tftp to unknown flash
2695 If a board has a variable number of flash banks, there are empty entries
2696 in flash_info[] and CFG_DIRECT_FLASH_TFTP is set, tftp boot fails with
2697 "Outside available Flash". This patch skips flash banks with unknown
2700 Signed-off-by: Jochen Friedrich <jochen@scram.de>
2701 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2703 commit 33314470ab32a3f5412bb61b5f3d6c216c88bf9b
2704 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2705 Date: Thu Aug 28 13:40:44 2008 +0900
2707 net: smc911x: Add pkt_data_pull and pkt_data_push function
2709 The RSK7203 board has the SMSC9118 wired up 'incorrectly'.
2710 Byte-swapping is necessary, and so poor performance is inevitable.
2711 This problem cannot evade by the swap function of CHIP, this can
2712 evade by software Byte-swapping.
2713 And this has problem by FIFO access only. pkt_data_pull/pkt_data_push
2714 functions necessary to solve this problem.
2716 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
2717 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2719 commit 10efa024b8ffd9e6aaca63da8bddfdffdc672274
2720 Author: Ben Warren <biggerbadderben@gmail.com>
2721 Date: Sun Aug 31 20:37:00 2008 -0700
2723 Moved initialization of EEPRO100 Ethernet controller to board_eth_init()
2754 Removed initialization of the driver from net/eth.c
2755 Also, wrapped contents of pci_eth_init() by CONFIG_PCI.
2757 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2759 commit 8ca0b3f99c4fce7a599dcaf92ae095496dc8c8e0
2760 Author: Ben Warren <biggerbadderben@gmail.com>
2761 Date: Sun Aug 31 10:45:44 2008 -0700
2763 Moved initialization of TULIP Ethernet controller to board_eth_init()
2778 Removed initialization of the driver from net/eth.c
2780 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2782 commit ad3381cf4167120db5c7b88e4970245e1d5c0a32
2783 Author: Ben Warren <biggerbadderben@gmail.com>
2784 Date: Sun Aug 31 10:44:19 2008 -0700
2786 Moved initialization of E1000 Ethernet controller to board_eth_init()
2793 Removed initialization of the driver from net/eth.c
2795 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2797 commit 4fce2aceaf8afd31a252bc782c9dbc497bf40487
2798 Author: Ben Warren <biggerbadderben@gmail.com>
2799 Date: Sun Aug 31 10:40:51 2008 -0700
2801 Moved initialization of plb2800 Ethernet driver to board_eth_init
2806 Removed initialization of controller from net/eth.c
2808 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2810 commit e1d7480b5de1fd4830bf7cf5e2237d3b0846d08d
2811 Author: Ben Warren <biggerbadderben@gmail.com>
2812 Date: Sun Aug 31 10:39:12 2008 -0700
2814 Moved initialization of MPC5xxx_FEC Ethernet driver to CPU directory
2816 Modified board_eth_init() functions of boards that have this FEC in addition
2817 to other Ethernet controllers.
2828 Removed initialization of controller from net/eth.c
2830 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2832 commit a0aad08f9427ac00218bdb2cb649833ce6ec9b8d
2833 Author: Ben Warren <biggerbadderben@gmail.com>
2834 Date: Sun Aug 31 10:36:38 2008 -0700
2836 Moved initialization of MPC512x_FEC Ethernet driver to CPU directory
2838 Added a cpu_eth_init() function to MPC512x CPU directory and
2839 removed code from net/eth.c
2841 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2843 commit 8218bd2aa68820b878a8413493ae17fd8d21f944
2844 Author: Ben Warren <biggerbadderben@gmail.com>
2845 Date: Sun Aug 31 10:16:59 2008 -0700
2847 Moved initialization of IncaIP Ethernet controller to board_eth_init
2852 Removed initialization of the driver from net/eth.c
2854 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2856 commit 164846eeb25cb2a5ede7ab9371fdca7f4831a055
2857 Author: Ben Warren <biggerbadderben@gmail.com>
2858 Date: Sun Aug 31 10:15:26 2008 -0700
2860 Moved initialization of 3COM Ethernet controller (AmigaOne) to board_eth_init()
2865 Removed initialization of the driver from net/eth.c
2867 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2869 commit 6aca145e067efe75398e9fac97822bd3700de0b2
2870 Author: Ben Warren <biggerbadderben@gmail.com>
2871 Date: Sun Aug 31 10:13:34 2008 -0700
2873 Moved initialization of GT6426x Ethernet controller to board_eth_init()
2880 Removed initialization of the driver from net/eth.c
2882 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2884 commit e3090534d62045dcb73f5392bacc64a4e8e443dc
2885 Author: Ben Warren <biggerbadderben@gmail.com>
2886 Date: Sun Aug 31 10:08:43 2008 -0700
2888 Moved initialization of PCNET Ethernet controller to board_eth_init()
2894 Removed initialization of the driver from net/eth.c
2896 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2898 commit b902b8dda5e1fd4d5fe2f202c71ee3521d2c40ed
2899 Author: Ben Warren <biggerbadderben@gmail.com>
2900 Date: Sun Aug 31 10:07:16 2008 -0700
2902 Moved initialization of NATSEMI Ethernet controller to board_eth_init()
2907 Removed initialization of the driver from net/eth.c
2909 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2911 commit 19403633dd70333893c2da7926a1d0dcd6dab7d8
2912 Author: Ben Warren <biggerbadderben@gmail.com>
2913 Date: Sun Aug 31 10:03:22 2008 -0700
2915 Moved initialization of NS8382X Ethernet controller to board_eth_init()
2929 Removed initialization of the driver from net/eth.c
2931 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2933 commit ccdd12f83ef93719fbe85f642aa4dc648b9498f0
2934 Author: Ben Warren <biggerbadderben@gmail.com>
2935 Date: Sun Aug 31 09:59:33 2008 -0700
2937 Moved initialization of TSI108 Ethernet controller to board_eth_init()
2942 Removed initialization of the driver from net/eth.c
2944 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2946 commit 0b252f50ae218ae15bfb63af44227972686ebc56
2947 Author: Ben Warren <biggerbadderben@gmail.com>
2948 Date: Sun Aug 31 21:41:08 2008 -0700
2950 Moved initialization of RTL8139 Ethernet controller to board_eth_init()
2959 Removed initialization of the driver from net/eth.c
2961 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2963 commit 02d69891d95ee76b0e86e1715a4dc0b964a57cb7
2964 Author: Ben Warren <biggerbadderben@gmail.com>
2965 Date: Sun Aug 31 09:49:42 2008 -0700
2967 Moved initialization of RTL8169 Ethernet controller to board_eth_init()
2973 Removed initialization of the driver from net/eth.c
2975 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2977 commit 3ae071e44256144d6c1e3febb65f6c56bd433769
2978 Author: Ben Warren <biggerbadderben@gmail.com>
2979 Date: Tue Aug 12 22:11:53 2008 -0700
2981 Moved initialization of Ethernet controllers on Atmel AT91 to board_eth_init()
2983 Removed at91sam9_eth_initialize() from net/eth.c
2985 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2987 commit 89973f8a82c28ad893c4c3cc56839a8e10fe5f13
2988 Author: Ben Warren <biggerbadderben@gmail.com>
2989 Date: Sun Aug 31 22:22:04 2008 -0700
2991 Introduce netdev.h header file and remove externs
2993 This addresses all drivers whose initializers have already
2994 been moved to board_eth_init()/cpu_eth_init().
2996 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2998 commit 5a8a163ac394d9f4f7ff57f415d82bd673b0068c
2999 Author: Andy Fleming <afleming@freescale.com>
3000 Date: Sun Aug 31 16:33:30 2008 -0500
3002 Add pixis_set_sgmii command
3004 The 8544DS and 8572DS platforms support an optional SGMII riser card to
3005 expose ethernet over an SGMII interface. Once the card is in, it is also
3006 necessary to configure the board such that it uses the card, rather than
3007 the on-board ethernet ports. This can either be done by flipping dip switches
3008 on the motherboard, or by modifying registers in the pixis. Either way
3011 This adds a command to allow users to choose which ports are routed through
3012 the SGMII card, and which through the onboard ports. It also allows users
3013 to revert to the current switch settings.
3015 This code does not work on the 8572, as the PIXIS is different.
3017 Signed-off-by: Andy Fleming <afleming@freescale.com>
3018 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3020 commit 216f2a7156a5fde7b47adc40ad553c888a9cbaa7
3021 Author: Andy Fleming <afleming@freescale.com>
3022 Date: Sun Aug 31 16:33:29 2008 -0500
3024 Add SGMII support for the 8544 DS
3026 The 8544 DS has an optional SGMII Riser card, which uses different PHY
3027 addresses. Check if we are in SGMII mode, and invoke the SGMII Riser
3030 Signed-off-by: Andy Fleming <afleming@freescale.com>
3031 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3033 commit 652f7c2eef76a1340928bd660845441e932d86a2
3034 Author: Andy Fleming <afleming@freescale.com>
3035 Date: Sun Aug 31 16:33:28 2008 -0500
3037 Add support for Freescale SGMII Riser Card
3039 The 8544DS and 8572DS systems have an optional SGMII riser card which
3040 exposes new ethernet ports which are connected to the eTSECs via an
3041 SGMII interface. The SGMII PHYs for this board are offset from the standard
3042 PHY addresses, so this code modifies the passed in tsec_info structure to
3043 use the SGMII PHYs on the card, instead.
3045 Signed-off-by: Andy Fleming <afleming@freescale.com>
3046 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3048 commit 2abe361c03b43e6dcf68f54e96b5c05156c49284
3049 Author: Andy Fleming <afleming@freescale.com>
3050 Date: Sun Aug 31 16:33:27 2008 -0500
3052 Add SGMII support to the tsec
3054 Adds support for configuring the TBI to talk properly with the SerDes.
3056 Signed-off-by: Andy Fleming <afleming@freescale.com>
3057 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3059 commit 75b9d4ae0d69f214eab641caf12ce8af83a39a42
3060 Author: Andy Fleming <afleming@freescale.com>
3061 Date: Sun Aug 31 16:33:26 2008 -0500
3063 Pass in tsec_info struct through tsec_initialize
3065 The tsec driver contains a hard-coded array of configuration information
3066 for the tsec ethernet controllers. We create a default function that works
3067 for most tsecs, and allow that to be overridden by board code. It creates
3068 an array of tsec_info structures, which are then parsed by the corresponding
3069 driver instance to determine configuration. Also, add regs, miiregs, and
3070 devname fields to the tsec_info structure, so that we don't need the kludgy
3073 Signed-off-by: Andy Fleming <afleming@freescale.com>
3074 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3076 commit dd3d1f56a01f460d560766126ee7dfed2ea9bc10
3077 Author: Andy Fleming <afleming@freescale.com>
3078 Date: Sun Aug 31 16:33:25 2008 -0500
3080 tsec: Move tsec.h to include/
3082 This is to prepare the way for board code passing in the tsec_info structure
3084 Signed-off-by: Andy Fleming <afleming@freescale.com>
3085 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3087 commit d23dc394aa69093b6326ad917db04dc0d1aff3f8
3088 Author: Sergei Poselenov <sposelenov@emcraft.com>
3089 Date: Fri Jun 6 15:52:44 2008 +0200
3091 PHY: Add support for the M88E1121R Marvell chip.
3093 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
3094 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
3095 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3097 commit 1711f3bd16d1c5e9d17b4c0198b426d86999781b
3098 Author: Wolfgang Denk <wd@denx.de>
3099 Date: Tue Sep 2 21:17:36 2008 +0200
3101 fw_env.c: fix build problems with MTD_VERSION=old
3103 (as needed to support old 2.4 Linux kernel based releases)
3105 Signed-off-by: Wolfgang Denk <wd@denx.de>
3107 commit 628ffd73bcff0c9f3bc5a8eeb2c7455fe9d28a51
3108 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3109 Date: Mon Sep 1 17:11:26 2008 +0200
3111 device: make device_register() clone the device
3113 This is expected by the callers, but this fact was hidden well within
3114 the old list implementation.
3116 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3118 commit c75e772a2f061a508bba28ded1b5bea91f0442b0
3119 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3120 Date: Sun Aug 31 23:28:15 2008 +0900
3122 sh: Remove CC line from board's Makefile
3124 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3126 commit 468eae0660de6fdfd9999944c536ecc4797bd944
3127 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3128 Date: Sun Aug 31 23:25:57 2008 +0900
3130 sh: Replaced "@./mkconfig" for @$(MKCONFIG)
3132 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3134 commit 3aeb1ff7482a732503186c742d3a5ded4b7a0d34
3135 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3136 Date: Thu Aug 28 14:50:52 2008 +0900
3138 sh: Add support sh2 to MAKEALL
3140 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3141 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3143 commit 6f3d8bb5faa12dbf3031382286784c978df038ee
3144 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3145 Date: Thu Aug 28 14:52:23 2008 +0900
3147 sh: Fix compile error rsk7203 board
3149 This boards used old type preprocessor.
3150 This patch fix compile error.
3152 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3153 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3155 commit 1c98172e025018552e9bb4c43b0aaee76f79b1aa
3156 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3157 Date: Thu Aug 28 14:53:31 2008 +0900
3159 sh: Fix compile error sh7785lcr board
3161 This boards used old type preprocessor.
3162 This patch fix compile error.
3164 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3165 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3167 commit 6f0da4972e48f99d37bc522814940a6022cd3084
3168 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3169 Date: Fri Aug 22 17:39:09 2008 +0900
3171 sh: Renesas Solutions AP325RXA board support
3173 AP325RXA is SH7723's reference board.
3174 This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other.
3175 In this patch, support SCIF, NOR Flash, and Ethernet.
3177 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3178 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3180 commit ab09f433b50bb83b5e440c335bc3839ee069e534
3181 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3182 Date: Fri Aug 22 17:48:51 2008 +0900
3184 sh: add support Renesas SH7723
3186 Renesas SH7723 has 5 SCIF, SD, Camera, LCDC and other.
3187 This patch supports CPU register's header file and SCIF serial driver.
3189 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3190 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3192 commit c655fad06ba3fb042dbc667724a40e1a9a091248
3193 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3194 Date: Sun Aug 31 23:02:04 2008 +0900
3196 sh: Renesas RSK+ 7203 board support
3198 This adds initial support for the RTE RSK+ SH7203 board.
3200 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3201 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3203 commit 6ede753ddf52a7b0f992d9bccbe5e4a0968ca475
3204 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3205 Date: Thu Jul 3 23:11:02 2008 +0900
3207 sh: Add support Renesas SH7203 processor
3209 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3210 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3212 commit 6ad43d0dd86b612895ddc7f480eb6cdfe793adf9
3213 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3214 Date: Sun Aug 31 22:48:33 2008 +0900
3216 sh: Add support SH2/SH2A which is CPU of Renesas Technology
3218 Add support SH2/SH2A basic function.
3220 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
3221 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3223 commit 0d53a47dc0737b6aa3a39caee21410c169441ae5
3224 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3225 Date: Sun Aug 31 22:45:08 2008 +0900
3227 sh: Renesas R0P7785LC0011RL board support
3229 This board has SH7785, 512MB DDR2-SDRAM, NOR Flash,
3230 Graphic, Ethernet, USB, SD, RTC, and I2C controller.
3232 This patch supports the following functions:
3233 - 128MB DDR2-SDRAM (29-bit address mode only)
3238 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3239 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3241 commit b0b6218929bc7de9a6bdb8e564fa8ec2efa71b4e
3242 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3243 Date: Thu Jul 10 19:32:53 2008 +0900
3245 sh: add support for SH7785
3247 Renesas SH7785 has DDR2-SDRAM controller, PCI, and other.
3248 This patch supports CPU register's header file.
3250 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
3251 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
3253 commit d6e04258be8f2408845468d3cf722a4cf0433445
3254 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3255 Date: Sun Aug 31 04:45:42 2008 +0200
3257 davinci: fix remaining dm644x_eth
3259 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3261 commit 08ab4e1780fa63c88dd5a5ab52f4ff4ed1ee1878
3262 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3263 Date: Sun Aug 31 04:24:56 2008 +0200
3265 fs: Move conditional compilation to Makefile
3267 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3269 commit c1de7a6daf9c657484e1c6d433f01fccd49a7f48
3270 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3271 Date: Sun Aug 31 04:24:55 2008 +0200
3273 devices: merge to list_head
3275 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3277 commit ef0255fc75f28655f9681422079287d68a14dbaa
3278 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3279 Date: Sun Aug 31 04:24:51 2008 +0200
3283 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3285 commit 71cb31227bee741b274f6c0279b2aac1ab8e28e3
3286 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3287 Date: Sun Aug 31 00:39:48 2008 +0200
3289 smdk6400: add gitignore
3291 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3293 commit f9f692e2b146d4e306b777e6d5f69f1d725b9eb9
3294 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3295 Date: Sun Aug 31 00:39:48 2008 +0200
3297 smdk6400: Use CONFIG_FLASH_CFI_DRIVER
3299 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3301 commit 7c0e5a8db3d1358b0ce3cc85ada0de6341ca4a15
3302 Author: Guennadi Liakhovetski <lg@denx.de>
3303 Date: Sun Aug 31 00:39:47 2008 +0200
3305 smdk6400: remove redundant bootargs definition
3307 Double bootargs setting leads to a duplicated environmant entry.
3309 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3311 commit 11edcfe260f20dcea79284a3e95270989d433854
3312 Author: Guennadi Liakhovetski <lg@denx.de>
3313 Date: Sun Aug 31 00:39:47 2008 +0200
3315 ARM: Add support for S3C6400 based SMDK6400 board
3317 SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl
3318 driver for it too. The board can also boot from the NOR flash, but due to
3319 hardware limitations it can only address 64KiB on it, which is not enough
3320 for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6.
3322 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3324 commit e0056b341069796eaea11eae0fc8eb93a3dceaac
3325 Author: Guennadi Liakhovetski <lg@denx.de>
3326 Date: Sun Aug 31 00:39:47 2008 +0200
3328 NAND: add NAND driver for S3C64XX
3330 Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6.
3332 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3334 commit 3fe7b589f9c7463df39056f8872006a67f56a91c
3335 Author: Guennadi Liakhovetski <lg@denx.de>
3336 Date: Sun Aug 31 00:39:47 2008 +0200
3338 S3C64XX: remove broken HWFLOW support from the serial driver
3340 As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is
3341 broken and currently unused. Remove it.
3343 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3345 commit 2fb28dcf82048045e1bf5014e938e486fa6c2383
3346 Author: Guennadi Liakhovetski <lg@denx.de>
3347 Date: Sun Aug 31 00:39:47 2008 +0200
3349 serial: add S3C64XX serial driver
3351 Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6.
3353 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3355 commit 8262813ca04fc57f5d8856e1828085c136e0f1eb
3356 Author: Guennadi Liakhovetski <lg@denx.de>
3357 Date: Sun Aug 31 00:39:46 2008 +0200
3359 USB: Add support for OHCI controller on S3C6400
3361 Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could
3362 try to enable the MMU, but map addresses 1-to-1, and disable data cache, then
3363 it should work too and we could still profit from instruction cache.
3365 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3367 commit 9b07773f8883665b002500c190507e9fd99b7181
3368 Author: Guennadi Liakhovetski <lg@denx.de>
3369 Date: Sun Aug 31 00:39:46 2008 +0200
3371 ARM: Add arm1176 core with S3C6400 SoC
3373 Based on the original S3C64XX port by Samsung for U-Boot 1.1.6.
3375 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
3377 commit fcaac589a68115819ddadcf5c18ded9a5f9e2c75
3378 Author: Sandeep Paulraj <s-paulraj@ti.com>
3379 Date: Sun Aug 31 00:39:46 2008 +0200
3381 ARM DaVinci: Changing function names for EMAC driver
3383 DM644x is just one of a series of DaVinci chips that use the EMAC driver.
3384 By replacing all the function names that start with dm644x_* to davinci_*
3385 we make these function more portable. I have tested this change on my EVM.
3386 DM6467 is another DaVinci SOC which uses the EMAC driver and i will
3387 be sending patches that add DaVinci DM6467 support to the list soon.
3389 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
3391 commit fbbb1de369ca7d5ace6f7b0ce9d0aee24a6f457b
3392 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
3393 Date: Sat Aug 30 23:21:30 2008 +0200
3395 Integrator[AP/CP] - Remove unused file memsetup.S
3397 - memsetup.s is changed/merged to lowlevel_init.S
3398 memsetup.S has a global label memsetup that just returns back to caller
3399 - memsetup global label is changed/merged to lowlevel_init
3400 This label is not called from anywhere.
3402 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
3404 commit 89d51d022a63be1a851eda983c8cbce1a044f65f
3405 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3406 Date: Wed Aug 27 21:35:52 2008 +0200
3408 ARM DaVinci: Standardize names of directories/files
3410 ARM DaVinci: Standardize names of directories/files.
3412 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3413 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3415 commit 264bbdd11d01f14f5ea4629556ae63b00b13402d
3416 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3417 Date: Fri Jul 11 15:10:13 2008 -0400
3419 ARM DaVinci: Move common functions to board/davinci/common
3421 ARM DaVinci: Move common functions to board/davinci/common.
3423 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
3425 commit c2b4b2e4814f4ace9015fdb64132894327400bf0
3426 Author: Stefan Roese <sr@denx.de>
3427 Date: Fri Aug 29 11:56:49 2008 +0200
3429 ppc4xx/NAND: Add select_chip function to 4xx NDFC driver
3431 This function is needed for the new NAND infrastructure. We only need
3432 a dummy implementation though for the NDFC.
3434 Signed-off-by: Stefan Roese <sr@denx.de>
3436 commit 3d4a746e2fb4545f07d871049805fb34ae97cc94
3437 Author: Stefan Roese <sr@denx.de>
3438 Date: Fri Aug 29 12:06:27 2008 +0200
3440 ppc4xx: Increase image size for NAND boot target
3442 This is needed since now with HUSH enabled (amcc-common.h) the image
3443 read from NAND exceeds the previous limit.
3445 Signed-off-by: Stefan Roese <sr@denx.de>
3447 commit 6b5049d056cd8ef72d1f2f461ceb2d033d93f759
3448 Author: Ben Warren <biggerbadderben@gmail.com>
3449 Date: Thu Aug 28 23:58:30 2008 -0700
3451 Move MPC512x_FEC driver to drivers/net
3453 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3455 commit 80b00af01b3c9154774de2936f05a051e92f6a03
3456 Author: Ben Warren <biggerbadderben@gmail.com>
3457 Date: Thu Aug 28 23:58:29 2008 -0700
3459 Move MPC5xxx_FEC driver to drivers/net
3461 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3463 commit 3de7bf0e6b1ad2608014096c8192f13229b2e9d7
3464 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3465 Date: Fri Aug 29 21:53:57 2008 +0200
3467 cmd_terminal: remove no need ifdef
3469 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3471 commit 578118bdf122877ae769776be002255be447b4fa
3472 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3473 Date: Fri Aug 29 21:53:57 2008 +0200
3475 common/Makefile: order by functionality
3477 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3479 commit ba7b5b2348b684cf8ec424b2e38e267dc1cfd2fb
3480 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3481 Date: Fri Aug 29 21:53:56 2008 +0200
3483 miiphyutil: Move conditional compilation to Makefile
3485 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3487 commit 81789c39db3f0f6b621df8c0ec66014d701f368e
3488 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3489 Date: Fri Aug 29 21:53:37 2008 +0200
3491 autoscript: Move conditional compilation to Makefile
3493 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3495 commit bbf52df9aa94ffb115b8b1ebeb00d01374bb0a1d
3496 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3497 Date: Fri Aug 29 01:18:11 2008 +0200
3499 crc16: move to lib_generic
3501 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3503 commit 55195773eacefb22dd483a3c560ea30a14263ce1
3504 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3505 Date: Fri Aug 29 01:18:01 2008 +0200
3507 miiphybb: move to drivers/net/phy
3509 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3511 commit e8314035996a9118ac5948df2ff8a2f2161ed67a
3512 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3513 Date: Thu Aug 28 12:31:51 2008 +0200
3515 soft_spi: move to drivers/spi
3517 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3519 commit 4d75e0aa9caca64d4a1d55d95cd1ca5f30d9fc56
3520 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3521 Date: Thu Aug 28 12:31:51 2008 +0200
3523 soft_i2c: move to drivers/i2c
3525 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3527 commit 717a222229fdb77703e9174d0eb08a4b41febf49
3528 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3529 Date: Thu Aug 28 12:31:48 2008 +0200
3531 gunzip: move to lib_generic
3533 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
3535 commit 52aef8f9ba28b747973bf76741c23db658d5773c
3536 Author: Wolfgang Ocker <weo@reccoware.de>
3537 Date: Tue Aug 26 19:55:23 2008 +0200
3539 ppc4xx: NAND configuration
3541 Made NAND bank configuration setting a config variable.
3543 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
3544 Signed-off-by: Stefan Roese <sr@denx.de>
3546 commit 5bc542a593abc9e974fbd34704af85c37c366c60
3547 Author: Victor Gallardo <vgallardo@amcc.com>
3548 Date: Thu Aug 28 16:03:28 2008 -0700
3550 ppc4xx: fix UIC external_interrupt hang on UIC0
3552 This patch fixes a UIC external_interrupt hang if critical or non-critical
3553 interrupt is set at the same time as a normal interrupt is set on UIC0.
3555 Signed-off-by: Victor Gallardo <vgallardo@amcc.com>
3556 Signed-off-by: Stefan Roese <sr@denx.de>
3558 commit 04737d5ffd16248cb80ab3dd4f3765057a803f18
3559 Author: Prodyut Hazarika <phazarika@amcc.com>
3560 Date: Wed Aug 27 16:39:00 2008 -0700
3562 ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
3564 Removed Magic numbers from Initialization preload registers
3565 Tested with Kilauea, Glacier, Canyonlands and Katmai boards
3566 About 5-7% improvement seen for LMBench memtests
3568 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
3569 Signed-off-by: Stefan Roese <sr@denx.de>
3571 commit 8a490422bed685c9491274ec997f62061d88620b
3572 Author: John Rigby <jrigby@freescale.com>
3573 Date: Thu Aug 28 13:17:07 2008 -0600
3575 ADS5121: Fix NOR and CPLD ALE timing for rev 2 silicon
3577 MPC5121 rev 2 silicon has a new register for controlling how long
3578 CS is asserted after deassertion of ALE in multiplexed mode.
3580 The default is to assert CS together with ALE. The alternative
3581 is to assert CS (ALEN+1)*LPC_CLK clocks after deassertion of ALE.
3583 The default is wrong for the NOR flash and CPLD on the ADS5121.
3585 This patch turns on the alternative for CS0 (NOR) and CS2 (CPLD)
3586 it does so conditionally based on silicon rev 2.0 or greater.
3588 Signed-off-by: Martha J Marx <mmarx@silicontkx.com>
3589 Signed-off-by: John Rigby <jrigby@freescale.com>
3591 commit 5d9a5efa4b332f442b54a755d49969123c3a8742
3592 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3593 Date: Tue Aug 19 00:56:46 2008 +0600
3595 Add I2C frequency dividers for ColdFire
3597 The existing I2C freqency dividers for FDR does not apply
3598 to ColdFire platforms; thus, a seperate table is added
3599 based on MCF5xxx Reference Manual
3601 Signed-off-by: Luigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
3602 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3603 Acked-by: Tabi Timur <timur@freescale.com>
3605 commit eec567a67e00d1ed8d941e9098b7d421f4091abf
3606 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3607 Date: Tue Aug 19 03:01:19 2008 +0600
3609 ColdFire: I2C fix for multiple platforms
3611 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3613 commit d53cf6a9c7423cba668b867978648645f71c3090
3614 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3615 Date: Tue Aug 19 00:37:13 2008 +0600
3617 ColdFire: Add CONFIG_MII_INIT for M5272C3
3619 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3621 commit f78ced3028d4130b24a318943a70cf5584ab16f4
3622 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3623 Date: Tue Aug 19 00:26:25 2008 +0600
3625 ColdFire: Multiple fixes for MCF5445x platforms
3627 Add FEC pin set and mii reset in __mii_init(). Change
3628 legacy flash vendor from 2 to AMD LEGACY (0xFFF0),
3629 change cfi_offset to 0, and change CFG_FLASH_CFI to
3630 CONFIG_FLASH_CFI_LEGACY. Correct M54451EVB and
3631 M54455EVB env settings in configuration file.
3633 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3635 commit 454e725b3a9537b7f273bbd0cbca180f23a7a6e8
3636 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3637 Date: Fri Aug 15 18:24:25 2008 +0000
3639 ColdFire: Change the SDRAM BRD2WT timing from 3 to 7
3641 The user manuals recommend 7.
3643 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
3644 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3646 commit 79e0799cf6e88d98d77b216a55234bf674b59a4e
3647 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3648 Date: Fri Aug 15 16:50:07 2008 +0000
3650 ColdFire: Raise uart baudrate to 115200 bps
3652 M5249EVB, M5271EVB, M5272C3, M5275EVB and M5282EVB platforms
3653 uart baudrate increase from 19200 to 115200 bps
3655 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3657 commit ab6ba842682552ccf071d0034da0a20633d1d1ac
3658 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3659 Date: Wed Aug 13 12:07:03 2008 +0000
3661 ColdFire: Fix board.c warning message
3663 Implicit declaration of nand_init() warning message
3665 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3667 commit 5798b1c4650e9a8713c95b25c1e669a2bc80a97b
3668 Author: Kumar Gala <galak@kernel.crashing.org>
3669 Date: Wed Aug 27 01:10:34 2008 -0500
3671 FSL DDR: Remove duplicate setting of cs0_bnds register on 86xx.
3673 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3675 commit 258c37b147353bc522ffc33dfbd7d0d9cd7c32d7
3676 Author: Heiko Schocher <hs@denx.de>
3677 Date: Thu Aug 21 20:44:49 2008 +0200
3679 mpc52xx: added support for the MPC5200 based MUC.MC52 board from MAN.
3681 Signed-off-by: Heiko Schocher <hs@denx.de>
3683 commit 9cff4448a9cb882defe6c8bde73b77fc0c636799
3684 Author: Kumar Gala <galak@kernel.crashing.org>
3685 Date: Tue Aug 19 14:46:36 2008 -0500
3687 mpc85xx: remove redudant code with lib_ppc/interrupts.c
3689 For some reason we duplicated the majority of code in lib_ppc/interrupts.c
3690 not show how that happened, but there is no good reason for it.
3692 Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why
3695 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3697 commit 9490a7f1a9484617bad75c60807ce02c8a3a6d56
3698 Author: Kumar Gala <galak@kernel.crashing.org>
3699 Date: Fri Jul 25 13:31:05 2008 -0500
3701 mpc85xx: Add support for the MPC8536DS reference board
3703 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3704 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
3705 Signed-off-by: Dejan Minic <minic@freescale.com>
3706 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3707 Signed-off-by: Dave Liu <daveliu@freescale.com>
3708 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3710 commit ef50d6c06ece74fb17e8d7510e62cad9df8b810d
3711 Author: Kumar Gala <galak@kernel.crashing.org>
3712 Date: Tue Aug 12 11:14:19 2008 -0500
3714 mpc85xx: Add support for the MPC8536
3716 The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We
3717 also have SERDES init code for the 8536.
3719 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3720 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
3721 Signed-off-by: Dejan Minic <minic@freescale.com>
3722 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
3723 Signed-off-by: Dave Liu <daveliu@freescale.com>
3725 commit 129ba616b3813dde861f25f3d8a3c47c5c36ad5f
3726 Author: Kumar Gala <galak@kernel.crashing.org>
3727 Date: Tue Aug 12 11:13:08 2008 -0500
3729 mpc85xx: Add support for the MPC8572DS reference board
3731 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3733 commit 457caecdbca3df21a93abff19eab12dbc61b7897
3734 Author: Kumar Gala <galak@kernel.crashing.org>
3735 Date: Wed Aug 27 01:05:35 2008 -0500
3737 FSL DDR: Remove old SPD support from cpu/mpc85xx
3739 All 85xx boards have been converted to the new code so we can
3740 remove the old SPD DDR setup code.
3742 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3744 commit 0e7927db138976469e7257e29c1338050a50fcd9
3745 Author: Kumar Gala <galak@kernel.crashing.org>
3746 Date: Wed Aug 27 01:04:07 2008 -0500
3748 FSL DDR: Convert STXSSA to new DDR code.
3750 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3752 commit c360d9b970fbb9c13744c355879671165bbb9b9e
3753 Author: Kumar Gala <galak@kernel.crashing.org>
3754 Date: Wed Aug 27 01:03:42 2008 -0500
3756 FSL DDR: Convert STXGP3 to new DDR code.
3758 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3760 commit 8e55313b7ae12352a343f9b9962e662dbd897187
3761 Author: Kumar Gala <galak@kernel.crashing.org>
3762 Date: Tue Aug 26 23:52:58 2008 -0500
3764 FSL DDR: Convert SBC8560 to new DDR code.
3766 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3768 commit 9658bec2e8f55d56ca1be70090ce5a348be4980f
3769 Author: Kumar Gala <galak@kernel.crashing.org>
3770 Date: Tue Aug 26 23:52:32 2008 -0500
3772 FSL DDR: Convert MPC8540EVAL to new DDR code.
3774 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3776 commit 6bfa8f723cfd82c55e3ef5620ade396916470a70
3777 Author: Kumar Gala <galak@kernel.crashing.org>
3778 Date: Tue Aug 26 23:52:07 2008 -0500
3780 FSL DDR: Convert PM856 to new DDR code.
3782 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3784 commit d53bd3e17bd4f460257c19255569ea6dcfaae817
3785 Author: Kumar Gala <galak@kernel.crashing.org>
3786 Date: Tue Aug 26 23:51:49 2008 -0500
3788 FSL DDR: Convert PM854 to new DDR code.
3790 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3792 commit 33b9079ba20926f14238fff863b68a98e938948e
3793 Author: Kumar Gala <galak@kernel.crashing.org>
3794 Date: Tue Aug 26 23:15:28 2008 -0500
3796 FSL DDR: Convert sbc8548 to new DDR code.
3798 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3800 commit a947e4c7eb15cea1d9fb633955c516aab5ad35dd
3801 Author: Kumar Gala <galak@kernel.crashing.org>
3802 Date: Tue Aug 26 23:14:14 2008 -0500
3804 FSL DDR: Convert atum8548 to new DDR code.
3806 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3808 commit be0bd8234b9777ecd63c4c686f72af070d886517
3809 Author: Kumar Gala <galak@kernel.crashing.org>
3810 Date: Tue Aug 26 22:56:56 2008 -0500
3812 FSL DDR: Convert socrates to new DDR code.
3814 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3816 commit 1167a2fd56138b716e01370c4267f3b70bf9ffa0
3817 Author: Kumar Gala <galak@kernel.crashing.org>
3818 Date: Tue Aug 26 08:02:30 2008 -0500
3820 FSL DDR: Convert MPC8544DS to new DDR code.
3822 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3824 commit e6f5b35b41ddbd637bb9ca4ad985b1e0b07dae0e
3825 Author: Jon Loeliger <jdl@freescale.com>
3826 Date: Tue Mar 18 13:51:05 2008 -0500
3828 FSL DDR: Convert MPC8568MDS to new DDR code.
3830 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3831 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3833 commit e31d2c1e2bc954dc32e33bb2076139f85b95f8e6
3834 Author: Jon Loeliger <jdl@freescale.com>
3835 Date: Tue Mar 18 13:51:06 2008 -0500
3837 FSL DDR: Convert MPC8548CDS to new DDR code.
3839 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3842 commit aa11d85cf318b961e029fe50d68ca47d004bce93
3843 Author: Jon Loeliger <jdl@freescale.com>
3844 Date: Mon Mar 17 15:48:18 2008 -0500
3846 FSL DDR: Convert MPC8541CDS to new DDR code.
3848 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3849 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3851 commit 2b40edb10d81da7bba724edbccd7f53777112579
3852 Author: Jon Loeliger <jdl@freescale.com>
3853 Date: Tue Mar 18 11:12:42 2008 -0500
3855 FSL DDR: Convert MPC8555ADS to new DDR code.
3857 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3858 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3860 commit 8b625114e8bc5a6b436181167a6e7fcd3303dd2c
3861 Author: Jon Loeliger <jdl@freescale.com>
3862 Date: Tue Mar 18 11:12:44 2008 -0500
3864 FSL DDR: Convert MPC8560ADS to new DDR code.
3866 Signed-off-by: Jon Loeliger <jdl@freescale.com>
3867 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3869 commit 9617c8d49a21703eaf13a4033ab1a56eecc033cc
3870 Author: Kumar Gala <galak@kernel.crashing.org>
3871 Date: Fri Jun 6 13:12:18 2008 -0500
3873 FSL DDR: Convert MPC8540ADS to new DDR code.
3875 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3877 commit 2a6c2d7ab2a66660f40a6cd3de2eb29ee29d9693
3878 Author: Kumar Gala <galak@kernel.crashing.org>
3879 Date: Tue Aug 26 21:34:55 2008 -0500
3881 FSL DDR: Add 85xx specific register setting
3883 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3885 commit 6fb1b7346849ccd0c20306143e334f5b76143070
3886 Author: Kumar Gala <galak@kernel.crashing.org>
3887 Date: Mon Jun 9 11:07:46 2008 -0500
3889 FSL DDR: Add e500 TLB helper for DDR code
3891 Provide a helper function that board code can call to map TLBs when
3894 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3896 commit d26b739afe5a6760bd345743188759cd9d0f3b47
3897 Author: Andrew Dyer <adyer@righthandtech.com>
3898 Date: Tue Aug 26 17:03:38 2008 -0500
3900 dm9000 remove dead external phy support, gpio fix
3902 dm9000 has code to detect and initialize external phy parts, but later
3903 on in the code the part is forced to use the internal phy
3904 unconditionally. Remove the unused/untested code.
3906 change the GPIO initialization so that only the GPIO used as an
3907 internal phy reset (hardwired in the chip) is set as an output. The
3908 remaining GPIO need to be handled by board specific code to prevent
3909 possible drive conflicts. Set as inputs for safety.
3911 replace a few magic numbers with defines
3913 Signed-off-by: Andrew Dyer <adyer@righthandtech.com>
3914 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3916 commit a1573db0c07c8ba99e9c373bb07ecd6f59da672c
3917 Author: Peter Tyser <ptyser@xes-inc.com>
3918 Date: Tue Aug 26 11:17:48 2008 -0500
3920 Standardize bootp, tftpboot, rarpboot, dhcp, and nfs command descriptions
3922 cmd_net.c command descriptions were updated to describe the optional
3923 hostIPaddr argument. The dhcp command help message was also updated
3924 to more closely reflect the other commands in cmd_net.c
3926 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
3927 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3929 commit 51dfe1382ebaf691485badfa0ea5e75b0710531b
3930 Author: Remy Bohmer <linux@bohmer.net>
3931 Date: Wed Aug 20 11:30:28 2008 +0200
3933 Fix bogus error message in the DHCP handler
3935 The DHCP handler has 1 state that is not listed in this case, causing a
3936 failure message when there is actually no failure.
3938 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3939 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3941 commit 61365501a0e2cae9c1df2818b7b5b3f52c450d18
3942 Author: Remy Bohmer <linux@bohmer.net>
3943 Date: Wed Aug 20 11:30:27 2008 +0200
3945 Fix compile error when CONFIG_BOOTP_RANDOM_DELAY is set.
3947 The option CONFIG_BOOTP_RANDOM_DELAY does not compile, because of a
3948 missing extern inside the net/bootp.h header
3950 Signed-off-by: Remy Bohmer <linux@bohmer.net>
3951 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3953 commit 1803f7f91ff35ca402259065df7557107dcf28a2
3954 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3955 Date: Tue Aug 19 21:26:32 2008 +0000
3957 ColdFire: Add FEC Buffer descriptors in SRAM
3959 Add FEC Buffer descriptors and data buffer in SRAM for
3960 faster execution and access.
3962 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3963 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3965 commit 429be27ce195210d4b9decf9e867b9ca6155a87d
3966 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3967 Date: Thu Aug 21 23:55:11 2008 +0000
3969 Fix ColdFire FEC warning messages
3971 Types mismatch and implicit declaration of icache_invalid()
3974 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
3975 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3977 commit 6a002171098e968bd5b362347d2831224fab6048
3978 Author: Ben Warren <biggerbadderben@gmail.com>
3979 Date: Sat Jul 12 00:17:50 2008 -0700
3981 Moved initialization of SKGE Ethernet driver to board code.
3983 The only board using this driver is the SL8245 board.
3984 Removed initialization for the driver from net/eth.c
3986 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3988 commit 8379f42bc745eb9e4ca551a30fd2d0a63f740d75
3989 Author: Ben Warren <biggerbadderben@gmail.com>
3990 Date: Sat Jul 12 00:08:45 2008 -0700
3992 Moved conditional compilation to Makefile for SK98 Ethernet driver
3994 Brute-force removal of #ifdefs. Didn't touch the code.
3995 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
3997 commit 65d3d99c28dc363d15eaee78225ff643df499b97
3998 Author: Ben Warren <biggerbadderben@gmail.com>
3999 Date: Fri Jul 11 23:42:19 2008 -0700
4001 Moved initialization of ULI526X Ethernet driver to board code.
4003 The only board using this driver is the Freescale MPC8610HPCD board.
4004 Removed initialization for the driver from net/eth.c
4006 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4008 commit 914947313a710f5dcf06beaf7f2aa24f1ebcce4f
4009 Author: Ben Warren <biggerbadderben@gmail.com>
4010 Date: Fri Jul 11 23:15:28 2008 -0700
4012 Moved initialization of Blackfin EMAC Ethernet controller to board_eth_init()
4014 Added board_eth_init() function to bf537-stamp board.
4015 Removed initialization for the Blackin EMAC driver from net/eth.c
4017 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4019 commit fc363ce35408f348cacced68505f3747a53e3d7c
4020 Author: Ben Warren <biggerbadderben@gmail.com>
4021 Date: Wed Jul 9 01:04:19 2008 -0700
4023 Moved initialization of GRETH Ethernet driver to CPU directory
4025 Added a cpu_eth_init() function to leon2/leon3 CPU directories and
4026 removed code from net/eth.c
4028 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4030 commit 86882b80771309bceb11c6accfd7f6f90ade8bfc
4031 Author: Ben Warren <biggerbadderben@gmail.com>
4032 Date: Tue Aug 26 22:16:25 2008 -0700
4034 Moved initialization of MCFFEC Ethernet driver to CPU directory
4036 Added a cpu_eth_init() function to coldfire CPU directories and
4037 removed code from net/eth.c
4039 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4041 commit b31da88b9c160d80d42a59cbbb31e24f27184d5c
4042 Author: Ben Warren <biggerbadderben@gmail.com>
4043 Date: Tue Aug 26 22:12:36 2008 -0700
4045 Moved initialization of FSL_MCDMAFEC Ethernet driver to CPU directory
4047 Added a cpu_eth_init() function to cpu/mcf547x_8x directory and
4048 removed code from net/eth.c
4050 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
4052 commit b5710d9974f6f0f3ddb4e67d6cccc262ab37049e
4053 Author: Kumar Gala <galak@kernel.crashing.org>
4054 Date: Tue Aug 26 15:01:38 2008 -0500
4056 FSL DDR: Remove old SPD support from cpu/mpc86xx
4058 All 86xx boards have been converted to the new code so we can
4059 remove the old SPD DDR setup code.
4061 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4063 commit 9bd4e5911b750837515466bc7449087698b88e0e
4064 Author: Kumar Gala <galak@kernel.crashing.org>
4065 Date: Tue Aug 26 15:01:37 2008 -0500
4067 FSL DDR: Convert SBC8641D to new DDR code.
4069 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4071 commit 39aa1a73483e1ac2bd56d5523abfc3970ee82c77
4072 Author: Jon Loeliger <jdl@freescale.com>
4073 Date: Tue Aug 26 15:01:36 2008 -0500
4075 FSL DDR: Convert MPC8610HPCD to new DDR code.
4077 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4078 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4080 commit 6a8e5692933e8e6d6e5ba7e594f49dd6d4c3a263
4081 Author: Kumar Gala <galak@kernel.crashing.org>
4082 Date: Tue Aug 26 15:01:35 2008 -0500
4084 FSL DDR: Convert MPC8641HPCN to new DDR code.
4086 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4087 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4089 commit 46ff4f1100ea64a01d21cc008ce85ac15eb1821f
4090 Author: Kumar Gala <galak@kernel.crashing.org>
4091 Date: Tue Aug 26 15:01:34 2008 -0500
4093 FSL DDR: Add 86xx specific register setting
4095 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4097 commit 233fdd502a6c227f476212b3097653ad48d7e254
4098 Author: Kumar Gala <galak@kernel.crashing.org>
4099 Date: Tue Aug 26 15:01:32 2008 -0500
4101 FSL DDR: Add DDR2 DIMM paramter support
4103 Compute DIMM parameters based upon the SPD information.
4105 Signed-off-by: James Yang <James.Yang@freescale.com>
4106 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4107 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4109 commit 05c05a2363a6ac11e0e405926034546ffad71fad
4110 Author: Kumar Gala <galak@kernel.crashing.org>
4111 Date: Tue Aug 26 15:01:30 2008 -0500
4113 FSL DDR: Add DDR1 DIMM paramter support
4115 Compute DIMM parameters based upon the SPD information in spd.
4117 Signed-off-by: James Yang <James.Yang@freescale.com>
4118 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4119 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4121 commit 58e5e9aff147e8c7e2bc1406bf9384f65f020ffa
4122 Author: Kumar Gala <galak@kernel.crashing.org>
4123 Date: Tue Aug 26 15:01:29 2008 -0500
4125 FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.
4127 The main purpose of this rewrite it to be able to share the same
4128 initialization code on all FSL PowerPC products that have DDR
4129 controllers. (83xx, 85xx, 86xx).
4131 The code is broken up into the following steps:
4134 COMPUTE_COMMON_PARMS
4140 This allows us to share more code an easily allow for board specific code
4143 Additionally this code base adds support for >4G of DDR and provides a
4144 foundation for supporting interleaving on processors with more than one
4147 Signed-off-by: James Yang <James.Yang@freescale.com>
4148 Signed-off-by: Jon Loeliger <jdl@freescale.com>
4149 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
4150 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
4151 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4153 commit f784e32b4bce0013983506b11af4b85b8ca3d36e
4154 Author: Kumar Gala <galak@kernel.crashing.org>
4155 Date: Tue Aug 26 15:01:28 2008 -0500
4157 FSL DDR: Provide a generic set_ddr_laws()
4159 Provide a helper function that will setup the last available
4160 LAWs (upto 2) for DDR. Useful for SPD/dyanmic DDR setting code.
4162 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4164 commit 0f2cbe3f5eddbdf3848265f35e4f714434929cff
4165 Author: James Yang <James.Yang@freescale.com>
4166 Date: Tue Aug 26 15:01:27 2008 -0500
4168 Add proper SPD definitions for DDR1/2/3
4170 Also adds helper functions for DDR1/2 to verify the checksum.
4172 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4174 commit 285db74716c724ae8a0ff177878fd09a74428c7b
4175 Author: Wolfgang Denk <wd@denx.de>
4176 Date: Wed Aug 27 01:02:48 2008 +0200
4180 Signed-off-by: Wolfgang Denk <wd@denx.de>
4182 commit adf22b66d8bf05bd46e098cf71e6dca29b30aa7b
4183 Author: Heiko Schocher <hs@denx.de>
4184 Date: Tue Aug 19 10:08:49 2008 +0200
4186 Add support for muas3001 board (MPC8270)
4188 Signed-off-by: Heiko Schocher <hs@denx.de>
4190 commit 322098bff32410d2a00031649b47c4ec90a66d9a
4191 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4192 Date: Tue Aug 19 08:31:18 2008 +0530
4194 common/cmd_load.c cleanup - remove unused variables
4196 - Remove unused global variable os_data_count.
4197 - Remove unused variable z.
4199 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
4201 commit 306620b762a4f9fa6678568ad2e8772dec145208
4202 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
4203 Date: Mon Aug 18 13:35:27 2008 +0200
4207 MVS1 board has reached end-of-life and can be removed completely.
4209 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
4211 commit 40d7e99d374ba0a0a29cd1a8ba40d3b7c2c175c7
4212 Author: Kumar Gala <galak@kernel.crashing.org>
4213 Date: Fri Aug 15 08:24:45 2008 -0500
4215 bootm: refactor do_reset and os boot function args
4217 There is no need for each OS specific function to call do_reset() we
4218 can just do it once in bootm. This means its feasible on an error for
4219 the OS boot function to return.
4221 Also, remove passing in cmd_tbl_t as its not needed by the OS boot
4222 functions. flag isn't currently used but might be in the future so
4225 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4227 commit 40afac22a9c602e55c501c800f1c064324711b56
4228 Author: Kumar Gala <galak@kernel.crashing.org>
4229 Date: Fri Aug 15 08:24:44 2008 -0500
4231 fdt: Added resize command
4233 Resize the fdt to size + padding to 4k boundary
4235 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4237 commit 2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b
4238 Author: Kumar Gala <galak@kernel.crashing.org>
4239 Date: Fri Aug 15 08:24:43 2008 -0500
4241 fdt: refactor initrd related code
4243 Created a new fdt_initrd() to deal with setting the initrd properties
4244 in the device tree and fixing up the mem reserve. We can use this
4245 both in the choosen node handling and lets us remove some duplicated
4246 code when we fixup the initrd info in bootm on PPC.
4248 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4250 commit 3082d2348c8e13342f5fdd10e9b3f7408062dbf9
4251 Author: Kumar Gala <galak@kernel.crashing.org>
4252 Date: Fri Aug 15 08:24:42 2008 -0500
4254 fdt: refactor fdt resize code
4256 Move the fdt resizing code out of ppc specific boot code and into
4257 common fdt support code.
4259 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4261 commit 396f635b8ff3ccbc38d75d5eda98444c6466810a
4262 Author: Kumar Gala <galak@kernel.crashing.org>
4263 Date: Fri Aug 15 08:24:41 2008 -0500
4265 bootm: refactor image detection and os load steps
4267 Created a bootm_start() that handles the parsing and detection of all
4268 the images that will be used by the bootm command (OS, ramdisk, fdt).
4269 As part of this we now tract all the relevant image offsets in the
4270 bootm_headers_t struct. This will allow us to have all the needed
4271 state for future sub-commands and lets us reduce a bit of arch
4272 specific code on SPARC.
4274 Created a bootm_load_os() that deals with decompression and loading
4277 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4279 commit e906cfae08e8cc2447f59b1bc4c22ab9c3c286d2
4280 Author: Kumar Gala <galak@kernel.crashing.org>
4281 Date: Fri Aug 15 08:24:40 2008 -0500
4283 bootm: move lmb into the bootm_headers_t structure
4285 To allow for persistent state between future bootm subcommands we
4286 need the lmb to exist in a global state.
4287 Moving it into the bootm_headers_t allows us to do that.
4289 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4291 commit 54f9c86691309b2f919f567f9255b8bcad2c7651
4292 Author: Kumar Gala <galak@kernel.crashing.org>
4293 Date: Fri Aug 15 08:24:39 2008 -0500
4295 bootm: Set working fdt address as part of the bootm flow
4297 Set the fdt working address so "fdt FOO" commands can be used as part
4298 of the bootm flow. Also set an the environment variable "fdtaddr"
4301 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4303 commit 06a09918f3903450313e2047a9cc258bf5872f46
4304 Author: Kumar Gala <galak@kernel.crashing.org>
4305 Date: Fri Aug 15 08:24:38 2008 -0500
4307 bootm: refactor fdt locating and relocation code
4309 Move the code that handles finding a device tree blob and relocating
4310 it (if needed) into common code so all arch's have access to it.
4312 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4314 commit c4f9419c6b54958e0eddbcbc9e5a4a7b7ec99865
4315 Author: Kumar Gala <galak@kernel.crashing.org>
4316 Date: Fri Aug 15 08:24:37 2008 -0500
4318 bootm: refactor ramdisk locating code
4320 Move determing if we have a ramdisk and where its located into the
4321 common code. Keep track of the ramdisk start and end in the
4322 bootm_headers_t image struct.
4324 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4326 commit c160a9544743e80e8889edb2275538e7764ce334
4327 Author: Kumar Gala <galak@kernel.crashing.org>
4328 Date: Fri Aug 15 08:24:36 2008 -0500
4330 bootm: refactor entry point code
4332 Move entry point code out of each arch and into common code.
4333 Keep the entry point in the bootm_headers_t images struct.
4335 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4337 commit 20220d22b9f41446288588cd2e457e0077a18bed
4338 Author: Randy Vinson <rvinson@mvista.com>
4339 Date: Wed Aug 13 11:44:57 2008 -0700
4341 mpc7448hpc2: Fix PCI I/O space mapping.
4343 PCI I/O space is currently mapped 1:1 at 0xFA000000. Linux requires
4344 PCI I/O space to start at 0 on the PCI bus. This patch maps PCI I/O
4345 space such that 0xFA000000 in the processor's address space maps to 0
4348 Signed-off-by Randy Vinson <rvinson@mvista.com>
4349 Acked-by: Roy Zang <tie-fei.zang@freescale.com>
4351 commit b4e07520bbb5467ad72eb92a5c9177d2797b9e30
4352 Author: Guennadi Liakhovetski <lg@denx.de>
4353 Date: Wed Aug 13 18:10:26 2008 +0200
4355 i.MX31: Specify maintainers for i.MX31-based boards
4357 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
4358 Signed-off-by: Wolfgang Denk <wd@denx.de>
4360 commit 51e46e28fda4bbdf5149ac7f67d62fcc8df4da63
4361 Author: Wolfgang Denk <wd@denx.de>
4362 Date: Tue Aug 26 15:01:28 2008 +0200
4364 ADS5121: adjust image addresses in RAM and flash
4366 Use the same mapping in flash as used by Linux
4368 Signed-off-by: Wolfgang Denk <wd@denx.de>
4370 commit 19f101412c16edee9fd55db4039e1d68a833b28b
4371 Author: Wolfgang Denk <wd@denx.de>
4372 Date: Tue Aug 26 13:14:34 2008 +0200
4374 cmd_mem.c: Fix help message alignment
4376 Bug was introced by "Big white-space cleanup" (53677ef1)
4378 Signed-off-by: Wolfgang Denk <wd@denx.de>
4380 commit 1a9eeb78b825bfade31d7606a2fe3b9eca9e35be
4381 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
4382 Date: Wed Aug 20 11:11:52 2008 +0200
4384 change mvBL-M7 default env and move to vendor subdir
4386 fix mvBL-M7 config and move to matrix_vision subdir
4388 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
4389 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4391 commit 002d27caf26e7eb913d474d3a91f67d56c8c31d5
4392 Author: Nick Spence <nick.spence@freescale.com>
4393 Date: Fri Aug 22 23:52:40 2008 -0700
4395 MPC83XX: Add miscellaneous registers and #defines to support MPC83xx family devices
4397 This patch adds elements to the 83xx sysconf structure and #define values that are used
4398 by mpc83xx family devices.
4400 Signed-off-by: Nick Spence <nick.spence@freescale.com>
4401 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4403 commit 447ad5768abda669ac0e7f46fcdb62fbe828d637
4404 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4405 Date: Fri Aug 22 11:00:15 2008 -0700
4407 MPC8349EMDS: Add PCI Agent (PCISLAVE) support
4409 Add the ability for the MPC8349EMDS to run in PCI Agent mode, acting as a
4410 PCI card rather than a host computer.
4412 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4413 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4415 commit 4ff9aea9d6b5602683a920951ef896996438af62
4416 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4417 Date: Fri Aug 22 11:00:14 2008 -0700
4419 mpc83xx: add PCISLAVE support to 83XX_GENERIC_PCI setup code
4421 This adds a helper function to unlock the PCI configuration bit, so that
4422 any extra PCI setup (such as outbound windows, etc.) can be done after
4423 using the 83XX_GENERIC_PCI code to set up the PCI bus.
4425 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4426 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4428 commit 162338e1fcde231ca4d562e5ebd7859456731691
4429 Author: Ira W. Snyder <iws@ovro.caltech.edu>
4430 Date: Fri Aug 22 11:00:13 2008 -0700
4432 MPC8349EMDS: use 83XX_GENERIC_PCI setup code
4434 Change the MPC8349EMDS board to use the generic PCI initialization code
4435 for the mpc83xx cpu.
4437 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
4438 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4440 commit f4e55a4941e8ba46bc06020b2747928adf8fdee7
4441 Author: Kim Phillips <kim.phillips@freescale.com>
4442 Date: Mon Aug 25 14:53:09 2008 -0500
4444 fix out of tree building
4446 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
4448 commit a49d10cf027d059ee15c262010a05cdaec0961e1
4449 Author: Wolfgang Denk <wd@denx.de>
4450 Date: Mon Aug 25 23:45:41 2008 +0200
4452 Minor coding style cleanup, updte CHANGELOG
4454 Signed-off-by: Wolfgang Denk <wd@denx.de>
4456 commit 4d56e8dea670757c801a6a65531f02a8f981ce1f
4457 Author: Stefan Roese <sr@denx.de>
4458 Date: Wed Aug 20 20:29:38 2008 +0200
4460 RTC: Fix Makefile problem with COBJS-$(CONFIG_RTC_DS1307 || CONFIG_RTC_DS1338)
4462 This "||" doesn't seem to work. Now using the idea suggest by Scott Wood
4463 to combine both config options into one line. This even allows defining
4464 both options and not generating the target object twice.
4466 Signed-off-by: Stefan Roese <sr@denx.de>
4468 commit 079edb913dbae147b50a488cf02e03f473fc5f28
4469 Author: Jens Gehrlein <sew_s@tqs.de>
4470 Date: Fri Jul 4 16:50:05 2008 +0200
4472 MX31: fix bit masks in function mx31_decode_pll()
4474 Bits MPCTL[MFN] and MPCTL[MFD] were not fully covered.
4476 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
4478 commit e8f1207bbf2df6fb693ee1aa3329b2014c92e5e6
4479 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4480 Date: Mon Aug 25 11:11:34 2008 +0200
4482 Correct ARM Versatile Timer Initialization
4484 - According to ARM Dual-Timer Module (SP804) TRM (ARM DDI0271),
4485 -- Timer Value Register @ TIMER Base + 4 is Read-only.
4486 -- Prescale Value (Bits 3-2 of TIMER Control register)
4487 can only be one of 00,01,10. 11 is undefined.
4488 -- CFG_HZ for Versatile board is set to
4489 #define CFG_HZ (1000000 / 256)
4490 So Prescale bits is set to indicate
4491 - 8 Stages of Prescale, Clock divided by 256
4492 - The Timer Control Register has one Undefined/Shouldn't Use Bit
4493 So we should do read/modify/write Operation
4495 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
4497 commit 535cfa4f3de86cf48d6c0af1daf33aebdca089f9
4498 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4499 Date: Mon Aug 25 11:30:29 2008 +0200
4501 Add ARM AMBA PL031 RTC Support
4503 Signed-off-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
4505 commit e39411674669cc880e1ec4a8ca4794fb15c33a45
4506 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4507 Date: Tue Aug 19 16:21:03 2008 -0400
4509 ARM DaVinci: Removed redundant NAND initialization code.
4511 ARM DaVinci: Removed redundant NAND initialization code.
4513 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4515 commit b3fb663b20d995ca41327db877ddb168279b3f62
4516 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4517 Date: Tue Aug 19 16:21:00 2008 -0400
4519 ARM DaVinci: Fix compilation error with new MTD code.
4521 ARM DaVinci: Fix compilation error with new MTD code.
4523 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
4525 commit 109c30fb8edea1a15d37a6ce787cd5faf33d8e43
4526 Author: Gerald Van Baren <vanbaren@cideas.com>
4527 Date: Fri Aug 22 14:37:05 2008 -0400
4529 Add note on dereferencing /aliases pointers
4531 Replace the "must quote special characters" note with a hint on
4532 how to dereference /aliases pointers by omitting the leading "/".
4533 This feature was introduced by Kumar Gala as a libfdt enhancement
4534 in commit ed035708235332c3c117ee3bb1a426063f03cfcb.
4538 => fdt print /aliases
4540 ethernet0 = "/qe@e0100000/ucc@2000";
4541 ethernet1 = "/qe@e0100000/ucc@3000";
4542 serial0 = "/soc8360@e0000000/serial@4500";
4543 serial1 = "/soc8360@e0000000/serial@4600";
4544 pci0 = "/pci@e0008500";
4546 => fdt print ethernet0
4548 device_type = "network";
4549 compatible = "ucc_geth";
4551 reg = <0x2000 0x200>;
4552 interrupts = <0x20>;
4553 interrupt-parent = <0x2>;
4554 local-mac-address = [00 00 00 00 00 00];
4555 rx-clock-name = "none";
4556 tx-clock-name = "clk9";
4558 phy-connection-type = "rgmii-id";
4562 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4564 commit feeca3f578b7f53c032ba203698751c982f8bf5a
4565 Author: Kumar Gala <galak@kernel.crashing.org>
4566 Date: Thu Aug 14 08:28:19 2008 -0500
4568 libfdt: Add support for using aliases in fdt_path_offset()
4570 If the path doesn't start with '/' check to see if it matches some alias
4571 under "/aliases" and substitute the matching alias value in the path
4572 and retry the lookup.
4574 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4575 Acked-by: David Gibson <david@gibson.dropbear.id.au>
4576 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
4578 commit 0219399a4e3a8edb428e1924e1a03d58cccf8d8e
4579 Author: David Gibson <david@gibson.dropbear.id.au>
4580 Date: Wed Aug 6 14:50:49 2008 +1000
4582 libfdt: Implement fdt_get_property_namelen() and fdt_getprop_namelen()
4584 As well as fdt_subnode_offset(), libfdt includes an
4585 fdt_subnode_offset_namelen() function that takes the subnode name to
4586 look up not as a NUL-terminated string, but as a string with an
4587 explicit length. This can be useful when the caller has the name as
4588 part of a longer string, such as a full path.
4590 However, we don't have corresponding 'namelen' versions for
4591 fdt_get_property() and fdt_getprop(). There are less obvious use
4592 cases for these variants on property names, but there are
4593 circumstances where they can be useful e.g. looking up property names
4594 which need to be parsed from a longer string buffer such as user input
4595 or a configuration file, or looking up an alias in a path with
4596 IEEE1275 style aliases.
4598 So, since it's very easy to implement such variants, this patch does
4599 so. The original NUL-terminated variants are, of course, implemented
4600 in terms of the namelen versions.
4602 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4604 commit f171746f701ea58bf6a53e835b53d2aaebee0d81
4605 Author: David Gibson <david@gibson.dropbear.id.au>
4606 Date: Tue Jul 29 14:51:22 2008 +1000
4608 libfdt: Forgot one function when cleaning the namespace
4610 In commit b6d80a20fc293f3b995c3ce1a6744a5574192125, we renamed all
4611 libfdt functions to be prefixed with fdt_ or _fdt_ to minimise the
4612 chance of collisions with things from whatever package libfdt is
4613 embedded in, pulled into the libfdt build via that environment's
4616 Except... I missed one. This patch applies the same treatment to
4617 _stringlist_contains(). While we're at it, also make it static since
4618 it's only used in the same file.
4620 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4622 commit 46390da15411351fc3b498bd8c1615f78fe80df0
4623 Author: Wolfram Sang <w.sang@pengutronix.de>
4624 Date: Wed Jul 9 11:22:44 2008 +0200
4626 libfdt: Improve documentation in libfdt.h
4628 Fix a few typos and mistakes.
4630 Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
4631 Acked-by: David Gibson <david@gibson.dropbear.id.au>
4633 commit fc7758ee4f5782878f2e96876b7bc56cfee0ac66
4634 Author: David Gibson <david@gibson.dropbear.id.au>
4635 Date: Wed Jul 9 14:10:24 2008 +1000
4637 libfdt: Increase namespace-pollution paranoia
4639 libfdt is supposed to easy to embed in projects all and sundry.
4640 Often, it won't be practical to separate the embedded libfdt's
4641 namespace from that of the surrounding project. Which means there can
4642 be namespace conflicts between even libfdt's internal/static functions
4643 and functions or macros coming from the surrounding project's headers
4646 This patch, therefore, renames a bunch of libfdt internal functions
4647 and macros and makes a few other chances to reduce the chances of
4648 namespace collisions with embedding projects. Specifically:
4649 - Internal functions (even static ones) are now named _fdt_*()
4651 - The type and (static) global for the error table in
4652 fdt_strerror() gain an fdt_ prefix
4654 - The unused macro PALIGN is removed
4656 - The memeq and streq macros are removed and open-coded in the
4657 users (they were only used once each)
4659 - Other macros gain an FDT_ prefix
4661 - To save some of the bulk from the previous change, an
4662 FDT_TAGALIGN() macro is introduced, where FDT_TAGALIGN(x) ==
4663 FDT_ALIGN(x, FDT_TAGSIZE)
4665 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4667 commit c66830263af19831f2b7db307f79d1943febf7f9
4668 Author: David Gibson <david@gibson.dropbear.id.au>
4669 Date: Mon Jul 7 10:14:15 2008 +1000
4671 dtc: Enable and fix -Wcast-qual warnings
4673 Enabling -Wcast-qual warnings in dtc shows up a number of places where
4674 we are incorrectly discarding a const qualification. There are also
4675 some places where we are intentionally discarding the 'const', and we
4676 need an ugly cast through uintptr_t to suppress the warning. However,
4677 most of these are pretty well isolated with the *_w() functions. So
4678 in the interests of maximum safety with const qualifications, this
4679 patch enables the warnings and fixes the existing complaints.
4681 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4682 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
4684 commit ef4e8ce1beb5b93aedda5a4c1b90bfd989c6791e
4685 Author: David Gibson <david@gibson.dropbear.id.au>
4686 Date: Mon Jul 7 10:10:48 2008 +1000
4688 dtc: Enable and fix -Wpointer-arith warnings
4690 This patch turns on the -Wpointer-arith option in the dtc Makefile,
4691 and fixes the resulting warnings due to using (void *) in pointer
4692 arithmetic. While convenient, pointer arithmetic on void * is not
4693 portable, so it's better that we avoid it, particularly in libfdt.
4695 Also add necessary definition of uintptr_t needed by David Gibson's
4696 changeset "dtc: Enable and fix -Wpointer-arith warnings" (the definition
4697 comes from stdint.h, which u-boot doesn't have). -- gvb
4699 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
4700 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
4702 commit 5d4b3d2b31e58fcb2d4bd10af762f5ff41b229fd
4703 Author: Tirumala R Marri <tmarri@amcc.com>
4704 Date: Thu Aug 21 21:54:53 2008 -0700
4706 ppc4xx: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix
4708 During recent PCI-E tests it has been found that current
4709 driverl level and de-emphasis values are not set correctly.
4710 After sweeping throgh all de-ephasis values, it was found that
4711 0x130 is a right value. Where 0x13 is driver level and 0 is
4714 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
4715 Signed-off-by: Stefan Roese <sr@denx.de>
4717 commit 0bb86d823b6c150c7ee17de0cfca9ffccc16463b
4718 Author: Remy Bohmer <linux@bohmer.net>
4719 Date: Wed Aug 20 20:46:56 2008 +0200
4721 Make the YAFFS filesystem work
4723 Recently the YAFFS filesystem support has been added to U-boot.
4724 However, just enabling CONFIG_YAFFS2 is not enough to get it working.
4726 ymount will generate an exception (when dereferencing mtd->readoob()), because
4727 the genericDevice is a null pointer. Further, a lot of logging is produced
4728 while using YAFFS fs, so logging should also be disabled.
4729 Both issues are solved by this patch.
4731 With this patch and CONFIG_YAFFS2 enabled, I get a readable filesystem
4732 in U-boot, as well as in Linux.
4734 Tested on a Atmel AT91SAM9261EK board.
4736 Signed-off-by: Remy Bohmer <linux@bohmer.net>
4737 Acked-by: William Juul <william.juul@tandberg.com>
4738 Signed-off-by: Scott Wood <scottwood@freescale.com>
4740 commit bfd7f38614e21f745b6d6845fcc616ebc5e4d36f
4741 Author: Kyungmin Park <kmpark@infradead.org>
4742 Date: Tue Aug 19 08:42:53 2008 +0900
4744 Fix OneNAND read_oob/write_oob functions compatability
4746 Also sync with kernel OneNAND codes
4748 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
4749 Signed-off-by: Scott Wood <scottwood@freescale.com>
4751 commit 8d765456c1d33f2010d2717ee58de7647fdc6346
4752 Author: Scott Wood <scottwood@freescale.com>
4753 Date: Mon Aug 18 17:11:20 2008 -0500
4755 NAND: Remove delay from nand_boot_fsl_elbc.c.
4757 It was for debugging purposes, and shouldn't have been left in.
4759 Signed-off-by: Scott Wood <scottwood@freescale.com>
4761 commit f556483734126793522fb7a8cf36af90da78f084
4762 Author: Stefan Roese <sr@denx.de>
4763 Date: Thu Aug 21 11:05:03 2008 +0200
4765 ppc4xx: Cleanup of "ppc4xx: Optimize PLB4 Arbiter..." patch
4767 This patch fixes some minor issues introduced with the patch:
4768 ppc4xx: Optimize PLB4 Arbiter... from Prodyut Hazarika:
4770 - Rework memory-queue and PLB arbiter optimization code, that the
4771 local variable is not needed anymore. This removes one #ifdef.
4772 - Use consistant spacing in ppc4xx.h header (XXX + 0x01 instead
4773 of XXX+ 0x01). This was not introduced by Prodyut, just a
4776 Signed-off-by: Stefan Roese <sr@denx.de>
4778 commit 079589bcfb24ba11068460276a3cc9549ab5346f
4779 Author: Prodyut Hazarika <phazarika@amcc.com>
4780 Date: Wed Aug 20 09:38:51 2008 -0700
4782 ppc4xx: Optimize PLB4 Arbiter and Memory Queue settings for PPC440SP/SPe,
4783 PPC405EX and PPC460EX/GT/SX
4785 - Read pipeline depth set to 4 for PPC440SP/SPE, PPC405EX, PPC460EX/GT/SX
4787 - Moved PLB4 Arbiter register definitions to ppc4xx.h since it is shared
4788 across processors (405 and 440/460)
4789 - Optimize Memory Queue settings for PPC440SP/SPE and PPC460EX/GT/SX
4791 - Add register bit definitions for Memory Queue Configuration registers
4793 Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
4794 Signed-off-by: Stefan Roese <sr@denx.de>
4796 commit ba37aa03287c5483c61c0a3e320c8888bee0143a
4797 Author: Kumar Gala <galak@kernel.crashing.org>
4798 Date: Tue Aug 19 15:41:18 2008 -0500
4800 fdt: rework fdt_fixup_ethernet() to use env instead of bd_t
4802 Move to using the environment variables 'ethaddr', 'eth1addr', etc..
4803 instead of bd->bi_enetaddr, bi_enet1addr, etc.
4805 This makes the code a bit more flexible to the number of ethernet
4808 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4810 commit 4cacf7c64609839f809e2f9c45873f1d65861703
4811 Author: Stefan Roese <sr@denx.de>
4812 Date: Tue Aug 19 14:57:55 2008 +0200
4814 hush: Fix printf debug macro in hush.c so that it usable in U-Boot
4816 This patch changes the debug_printf() marco for U-Boot in hush.c and
4817 moves the definition of DEBUG_SHELL to a place that is actually compiled
4820 Signed-off-by: Stefan Roese <sr@denx.de>
4822 commit 8f2b457ef26a44d9e5fd7d6b16c394e5c3a71ca2
4823 Author: Heiko Schocher <hs@denx.de>
4824 Date: Tue Aug 19 09:57:41 2008 +0200
4826 cfi: rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
4828 Commit 00b1883a4cac59d97cd297b1a3a398db85982865
4829 missed a few boards:
4830 include/configs/M5253DEMO.h
4831 include/configs/ml507.h
4832 include/configs/redwood.h
4834 This patch fixes this.
4836 Signed-off-by: Heiko Schocher <hs@denx.de>
4838 commit 0768b7a872964085eece8d5e9fec9175e9deb161
4839 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4840 Date: Mon Aug 18 13:41:27 2008 +0200
4842 Consolidate strmhz() implementation
4844 ARM, i386, m68k and ppc all have identical implementations of strmhz().
4845 Other architectures don't provide this function at all.
4847 This patch moves strmhz() into lib_generic, reducing code duplication
4848 and providing a more unified API across architectures.
4850 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4852 commit a928d0df211f1d829308d335d19be3ca42558dfc
4853 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
4854 Date: Mon Aug 18 12:02:51 2008 +0200
4856 fix mvbc_p board build warnings
4858 fix build warnings @ mvBC-P board by using correct types, i.e. change
4859 out_be32 to out_be16 and out_8 accordingly.
4861 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
4863 commit a958b663d27f616bd1dfb720d1b476d1ecaaa569
4864 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4865 Date: Sat Aug 16 18:54:27 2008 +0200
4867 Makefile: fix posix support on find
4869 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4871 commit bef92e215d945cc574399c1a1b00a3a76d35aa03
4872 Author: Axel Beierlein <belatronix@web.de>
4873 Date: Sat Aug 16 00:30:48 2008 +0200
4875 Adding bootlimit/bootcount feature for MPC5XXX on TQM5200 Boards
4877 Tested with TQM5200S on STK52XX.200 Board
4879 Signed-off-by: Axel Beierlein <belatronix@web.de>
4881 commit 0800707b6d5041a840a65d556032c15c584b55f8
4882 Author: Peter Tyser <ptyser@xes-inc.com>
4883 Date: Fri Aug 15 14:36:32 2008 -0500
4885 mod_i2c_mem() bugfix
4887 The last used chip, address, and address length were not being
4888 stored for the imm and imn commands.
4890 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
4892 commit 4afbef967275b2f636abae86f91b81becee7ad03
4893 Author: Steven A. Falco <sfalco@harris.com>
4894 Date: Fri Aug 15 15:37:31 2008 -0400
4896 Fix typo in spelling of ATAPI.
4898 Correct a small spelling mistake.
4900 Signed-off-by: Steven A. Falco <sfalco@harris.com>
4902 commit 36c2d3062ecc6ab85f8e237180eb134464c48418
4903 Author: Steven A. Falco <sfalco@harris.com>
4904 Date: Fri Aug 15 15:34:10 2008 -0400
4906 Add a hook to allow board-specific PIO mode setting.
4908 This patch adds a hook whereby a board-specific routine can be called to
4909 configure hardware for a PIO mode. The prototype for the board-specific
4912 int inline ide_set_piomode(int pio_mode)
4914 ide_set_piomode should be prepared to configure hardware for a pio_mode
4915 between 0 and 6, inclusive. It should return 0 on success or 1 on failure.
4917 Signed-off-by: Steven A. Falco <sfalco@harris.com>
4919 commit 9571b84cb1423876f1153081b9e6a51d90fbcdc4
4920 Author: Steven A. Falco <sfalco@harris.com>
4921 Date: Fri Aug 15 15:29:12 2008 -0400
4923 Replace enums in ata.h with an include of libata.h
4925 This patch removes some enums from ata.h and replaces them with an
4926 include of libata.h. This way, we eliminate duplicated code, and
4927 prevent errors whereby the different versions could be out of sync.
4929 Signed-off-by: Steven A. Falco <sfalco@harris.com>
4931 commit 0de0afbca865ecf482b4d2b635236746def8518f
4932 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4933 Date: Fri Aug 15 18:32:41 2008 +0200
4935 coldfire: fix CFI drivers activation with new macro
4937 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
4939 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
4941 commit 7dbc38ad915f4ae67f4cd1818b7ac8fed368aaa9
4942 Author: Kumar Gala <galak@kernel.crashing.org>
4943 Date: Fri Aug 15 08:24:35 2008 -0500
4945 fdt: fdt addr w/o any args reports back the current working address
4947 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4949 commit f953d99fd528a496b400a706b511eaf8e3ea66af
4950 Author: Kumar Gala <galak@kernel.crashing.org>
4951 Date: Fri Aug 15 08:24:34 2008 -0500
4953 fdt: added the ability to set initrd start/end via chosen command
4955 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4957 commit ffa4bafacaef67058463b3d7d0099ced57569dd2
4958 Author: Kumar Gala <galak@kernel.crashing.org>
4959 Date: Fri Aug 15 08:24:33 2008 -0500
4961 Add command to enable/disable interrupts
4963 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
4965 commit 9e8e63cce69556aef10b58bcbc56d324f570ec3a
4966 Author: Nick Spence <nick.spence@freescale.com>
4967 Date: Tue Aug 19 22:21:16 2008 -0700
4969 CFI: Add CFI_CMDSET_INTEL_EXTENDED to fix flash_real_protect()
4971 This patch fixes a missing vendor code in the flash_real_protect() function.
4973 Signed-off-by: Nick Spence <nick.spence@freescale.com>
4974 Signed-off-by: Stefan Roese <sr@denx.de>
4976 commit 4e00acded2e6a8d663e12690a0f0f08f5bec5a58
4977 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4978 Date: Tue Aug 19 16:53:39 2008 +0000
4980 CFI: Fix AMD Legacy sector protect
4982 New implement sector lock and unlock or softlock commands
4983 do not exist in AMD legacy flash. Thus, causing issue
4984 when erasing AMD legacy flash (such as lv040)
4986 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
4987 Signed-off-by: Stefan Roese <sr@denx.de>
4989 commit 492671404140f09d5b21b3d2ce4e362c0692c069
4990 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4991 Date: Wed Aug 20 09:40:16 2008 +0200
4993 hammerhead/mimc200: Use CONFIG_FLASH_CFI_DRIVER
4995 CFG_FLASH_CFI_DRIVER was recently renamed CONFIG_FLASH_CFI_DRIVER.
4997 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
4999 commit 33eac2b3d946fc998a09245dfe54d017079b9056
5000 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5001 Date: Wed Aug 20 09:28:36 2008 +0200
5003 hammerhead: Add missing printf parameter to CONFIG_AUTOBOOT_PROMPT
5005 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5007 commit 25da0b84195fdda89a943b2d25757db5afeef5b8
5008 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5009 Date: Wed Aug 20 09:27:37 2008 +0200
5011 favr-32-ezkit: Fix printf format warnings
5013 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5015 commit 462da25e89b0b58bf4c66346c1fcb3087c61b4b8
5016 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5017 Date: Fri Aug 15 12:04:25 2008 +0200
5019 MAINTAINERS: Sort avr32 section alphabetically
5021 The rest of the MAINTAINERS file appears to be sorted
5022 almost-alphabetically, but entries for the newly added AVR32 boards were
5023 added somewhat randomly. This patch sorts the list alphabetically again.
5025 Also update my e-mail address. The old one still works, but it may not
5028 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5030 commit 13b50fe3bc065c48911fa373231421280855a9d6
5031 Author: Mark Jackson <mpfj@mimc.co.uk>
5032 Date: Wed Jul 30 13:07:27 2008 +0100
5034 avr32: Add MIMC200 board
5036 The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra
5037 8MByte FLASH and 128KByte FRAM.
5039 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
5040 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
5042 commit db70b84329315c52f6ec77f5ae5ca1afe970a9bb
5043 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5044 Date: Wed Jul 9 21:07:34 2008 +0900
5046 rtl8169: add support for RTL8110SCL
5048 This patch fixes a problem that RTL8110SCL started transfer
5049 with an incorrect memory address.
5051 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
5052 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5054 commit 943b825bf15e6a28ac8328e0f6489478bceef1ea
5055 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5056 Date: Wed Jun 25 15:48:52 2008 -0500
5058 Fix dm9000 receive status and len little endian issue
5060 The received status and len was in little endian
5061 format and caused the ethernet unable to proceed
5062 further. Add __le16_to_cpu() in dm9000_rx_status_8/16/32bit().
5064 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5065 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
5067 commit fcd69a1a57fb2af4d26201422095a4be9f36963e
5068 Author: Kumar Gala <galak@kernel.crashing.org>
5069 Date: Fri Aug 15 08:24:32 2008 -0500
5071 Clean up usage of icache_disable/dcache_disable
5073 There is no point in disabling the icache on 7xx/74xx/86xx parts and not
5074 also flushing the icache. All callers of invalidate_l1_instruction_cache()
5075 call icache_disable() right after. Make it so icache_disable() calls
5076 invalidate_l1_instruction_cache() for us.
5078 Also, dcache_disable() already calls dcache_flush() so there is no point
5079 in the explicit calls of dcache_flush().
5081 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5083 commit a15b07104ca7bbb7093c9009c9ae1b58b4202d13
5084 Author: Kumar Gala <galak@kernel.crashing.org>
5085 Date: Fri Aug 15 08:24:31 2008 -0500
5087 Update linux bootm to support ePAPR client interface
5089 The ePAPR spec has some subtle differences from the current device
5090 tree based boot interface to the powerpc linux kernel. The powerpc
5091 linux kernel currently ignores the differences that ePAPR specifies.
5093 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5095 commit b734e5556a239b3be5f9693b2f4b4b739683ec16
5096 Author: Wolfgang Denk <wd@denx.de>
5097 Date: Mon Aug 18 23:50:20 2008 +0200
5099 Minor code cleanup: keep lists sorted.
5101 Signed-off-by: Wolfgang Denk <wd@denx.de>
5103 commit d0039d4ed275e6ca09fb417895024ad02be118c4
5104 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
5105 Date: Wed Jul 23 19:10:14 2008 +0200
5107 Add support for ADT7460 I2C monitor chip
5109 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
5111 commit eb59ea45ab77c14b090ea857d9ea9f902f40db0b
5112 Author: Michal Simek <monstr@monstr.eu>
5113 Date: Mon Jul 14 19:45:45 2008 +0200
5115 video: Clean drivers/video/Makefile
5117 Signed-off-by: Michal Simek <monstr@monstr.eu>
5119 commit 871c18dd301752270e1f74328c846c3104be1e2e
5120 Author: Michal Simek <monstr@monstr.eu>
5121 Date: Mon Jul 14 19:45:37 2008 +0200
5123 rtc: Clean drivers/rtc/Makefile
5125 Signed-off-by: Michal Simek <monstr@monstr.eu>
5127 commit a4a549b4b53adf40a0d3882cc30ac812a8f847c5
5128 Author: Michal Simek <monstr@monstr.eu>
5129 Date: Mon Jul 14 19:45:35 2008 +0200
5131 i2c: Clean drivers/i2c/ Makefile
5133 Signed-off-by: Michal Simek <monstr@monstr.eu>
5135 commit 0a823aa2a8a8c0685e73900f387d602d7edafc0e
5136 Author: Harald Welte <laforge@openmoko.org>
5137 Date: Wed Jul 9 22:30:30 2008 +0800
5139 Add 'license' command to U-Boot command line
5141 The 'license' command includes the U-Boot license (GPLv2) into the
5142 actual bootloader binary. The license text can be shown interactively
5143 at the U-Boot commandline.
5145 For products where the commandline can actually be accessed by the
5146 end user, this helps to prevent inadvertent GPL violations, since the
5147 GPLv2 license text can no longer be 'forgotten' to be included into
5150 The 'license' command can be enabled by CONFIG_CMD_LICENSE.
5152 Signed-off-by: Harald Welte <laforge@openmoko.org>
5154 commit fe2ce5500ebf43d79d227190bd2370232d5b113d
5155 Author: Harald Welte <laforge@gnumonks.org>
5156 Date: Sun Jul 6 15:56:38 2008 +0800
5158 add 'unzip' command to u-boot commandline
5160 [PATCH] add new 'unzip' command to u-boot commandline
5162 common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from
5163 memory to memory, and option CONFIG_CMD_UNZIP to enable it
5165 Signed-off-by: Werner Almesberger <werner@openmoko.org>
5166 Signed-off-by: Harald Welte <laforge@openmoko.org>
5168 commit 07efc9e321619c3dec213310c32e011aa6f02783
5169 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5170 Date: Wed Aug 6 19:37:17 2008 -0500
5172 Change CFG_ENV_SIZE to CFG_ENV_SECT_SIZE for SPI sector erase
5174 The CFG_ENV_SIZE is not suitable used for SPI flash erase
5175 sector size if CFG_ENV_SIZE is less than CFG_ENV_SECT_SIZE.
5176 Add condition check if CFG_ENV_SIZE is larger than
5177 CFG_ENV_SECT_SIZE, calculate the right number of sectors for
5180 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5182 commit 4cb4e654cafabaa1ac180d37b00c8f6095dae9c9
5183 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5184 Date: Mon Aug 11 15:54:25 2008 +0000
5186 ColdFire: Multiple fixes for M5282EVB
5188 Incorrect CFG_HZ value, change 1000000 to 1000.
5189 Rename #waring to #warning. RAMBAR1 uses twice
5190 in start.S, rename the later to FLASHBAR. Insert
5191 nop for DRAM setup. And, env_offset in linker file.
5193 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5195 commit 10db3a17a278dd3a27668b31cb32cdd1476e9513
5196 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5197 Date: Mon Aug 11 15:26:43 2008 +0000
5199 ColdFire: Move m5282evb from board to board/freescale
5201 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5203 commit 56df091d391f74bbf2dc2f7931f9f3c8f23529e4
5204 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5205 Date: Mon Aug 11 15:25:07 2008 +0000
5207 ColdFire: Move m5272c3 from board to board/freescale
5209 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5211 commit 659e9bad629a480f606b286d5703aef7159edf98
5212 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5213 Date: Mon Aug 11 15:23:16 2008 +0000
5215 ColdFire: Move m5271evb from board to board/freescale
5217 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5219 commit 05316f8ece8206339a208ec052f039cd0f7ca922
5220 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5221 Date: Mon Aug 11 13:41:49 2008 +0000
5223 ColdFire: Add M54451EVB platform support for MCF5445x
5225 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5227 commit 922cd7515597e9a2c07d68e2a6240b0b7b0f0136
5228 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5229 Date: Wed Aug 6 19:14:08 2008 -0500
5231 ColdFire: Add Serial Flash support for M54455EVB
5233 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5235 commit 9f751551456828b2d0ff417f10959fb0c7110bd0
5236 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5237 Date: Wed Jul 23 20:38:53 2008 -0500
5239 ColdFire: Implement SBF feature for M5445EVB
5241 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5243 commit a7323bba229203aae2604afde131ab47bad4eadc
5244 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5245 Date: Wed Jul 23 17:53:36 2008 -0500
5247 ColdFire: Add SSPI feature for MCF5445x
5249 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5251 commit b2d022d1ac3f59bffa9cec249341e77aea168abc
5252 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5253 Date: Wed Jul 23 17:37:10 2008 -0500
5255 ColdFire: Use CFI Flash driver for M54455EVB
5257 Remove non-common flash driver in
5258 board/freescale/m54455evb/flash.c. The non-cfi flash will
5259 use CONFIG_FLASH_CFI_LEGACY to configure the flash
5262 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5264 commit 6d33c6acfa35b1144d46ffbff7e29ee7969290d0
5265 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5266 Date: Wed Jul 23 17:11:47 2008 -0500
5268 ColdFire: Add M5253DEMO platform support for MCF5253
5270 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5272 commit 80ba61fd82569af40e04d4a089257b81881884f2
5273 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5274 Date: Wed Aug 6 14:17:09 2008 -0500
5276 ColdFire: Raise M5253EVBE uart baudrate to 115200 bps
5278 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5280 commit d361307e73ce1f6fc68760123f37d4876f851f3e
5281 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5282 Date: Wed Aug 6 14:11:36 2008 -0500
5284 ColdFire: Fix M5253EVB dram bring up issue
5286 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
5288 commit 4b0708093e15b412296328bf81325cf9b69fe512
5289 Author: Wolfgang Denk <wd@denx.de>
5290 Date: Thu Aug 14 14:41:06 2008 +0200
5292 Coding Style cleanup, update CHANGELOG
5294 Signed-off-by: Wolfgang Denk <wd@denx.de>
5296 commit 68cf19aae48f2969ec70669604d0d776f02c8bc4
5297 Author: Scott Wood <scottwood@freescale.com>
5298 Date: Wed Aug 13 18:24:05 2008 -0500
5300 socrates: Update NAND driver to new API.
5302 Also, fix some minor formatting issues, and simplify the handling of
5305 Signed-off-by: Scott Wood <scottwood@freescale.com>
5307 commit ba22d10f39eaeedd035e8265616e31ff88e314d5
5308 Author: Scott Wood <scottwood@freescale.com>
5309 Date: Wed Aug 13 18:03:40 2008 -0500
5311 quad100hd: Update NAND driver to new API.
5313 Signed-off-by: Scott Wood <scottwood@freescale.com>
5315 commit f64cb652a8a84c5c34d0afcbd7ffef886aa1d838
5316 Author: Scott Wood <scottwood@freescale.com>
5317 Date: Wed Aug 13 17:53:48 2008 -0500
5319 m5373evb: Update NAND driver to new API.
5321 Signed-off-by: Scott Wood <scottwood@freescale.com>
5323 commit 1a23a197c8722b805f40895544bbdb1a648c1c82
5324 Author: Scott Wood <scottwood@freescale.com>
5325 Date: Wed Aug 13 17:04:30 2008 -0500
5327 s3c24x0: Update NAND driver to new API.
5329 Signed-off-by: Scott Wood <scottwood@freescale.com>
5331 commit aa5f75f20db8a7103fad9c34d6f1193e10d1890f
5332 Author: Scott Wood <scottwood@freescale.com>
5333 Date: Wed Aug 13 15:56:00 2008 -0500
5335 at91: Update board NAND drivers to current API.
5337 Signed-off-by: Scott Wood <scottwood@freescale.com>
5339 commit d438d50848e9425286e5fb0493e0affb5a0b1e1b
5340 Author: Kyungmin Park <kmpark@infradead.org>
5341 Date: Wed Aug 13 09:11:02 2008 +0900
5343 Fix OneNAND build break
5345 Since page size field is changed from oobblock to writesize. But OneNAND is not updated.
5346 - fix bufferram management at erase operation
5347 This patch includes the NAND/OneNAND state filed too.
5349 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
5350 Signed-off-by: Scott Wood <scottwood@freescale.com>
5352 commit 9483df6408c25f16060432de3868901e352e23bc
5353 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5354 Date: Wed Aug 13 01:40:43 2008 +0200
5356 drivers/mtd/nand_legacy: Move conditional compilation to Makefile
5358 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5360 commit cc4a0ceeac5462106172d0cc9d9d542233aa3ab2
5361 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5362 Date: Wed Aug 13 01:40:43 2008 +0200
5364 drivers/mtd/nand: Move conditional compilation to Makefile
5366 rename CFG_NAND_LEGACY to CONFIG_NAND_LEGACY
5368 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5370 commit 4fb09b81920e5dfdfc4576883186733f0bd6059c
5371 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5372 Date: Wed Aug 13 01:40:42 2008 +0200
5374 drivers/mtd/onenand: Move conditional compilation to Makefile
5376 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5378 commit 00b1883a4cac59d97cd297b1a3a398db85982865
5379 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5380 Date: Wed Aug 13 01:40:42 2008 +0200
5382 drivers/mtd: Move conditional compilation to Makefile
5384 rename CFG_FLASH_CFI_DRIVER to CONFIG_FLASH_CFI_DRIVER
5386 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5388 commit 7ba44a5521cdb7fa1c72864025cde1e21a6f6921
5389 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5390 Date: Wed Aug 13 01:40:41 2008 +0200
5392 drivers/qe: Move conditional compilation to Makefile
5394 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5396 commit ab6878c7bc68a7b5e5b731655bdc13221bbfc493
5397 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5398 Date: Wed Aug 13 01:40:40 2008 +0200
5400 drivers/pci: Move conditional compilation to Makefile
5402 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5404 commit 55d6d2d39fe3fe87802e399aa17539368b495d2e
5405 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5406 Date: Wed Aug 13 01:40:40 2008 +0200
5408 drivers/misc: Move conditional compilation to Makefile
5410 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5412 commit 65e41ea0548b86e3d7892defac8e4dc1ea70aed1
5413 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5414 Date: Wed Aug 13 01:40:40 2008 +0200
5416 drivers/input: Move conditional compilation to Makefile
5418 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5420 commit 88f57e093114a44aa9a858d52b099bcc52034a8c
5421 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5422 Date: Wed Aug 13 01:40:39 2008 +0200
5424 drivers/dma: Move conditional compilation to Makefile
5426 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5428 commit 1a02806c4b1b4a09ad4e95d3aac3783889e5f8d7
5429 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5430 Date: Wed Aug 13 01:40:39 2008 +0200
5432 drivers/block: Move conditional compilation to Makefile
5434 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5436 commit 1a6ffbfaf4353bec379ed1fcfc54b6f1a30af09a
5437 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5438 Date: Wed Aug 13 01:40:39 2008 +0200
5440 serial: move CFG_NS9750_UART to CONFIG_NS9750_UART
5442 move also conditional compilation to Makefile
5444 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5446 commit 6c58a030f86829fa4f0d4337cf4b794c41a1823e
5447 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5448 Date: Wed Aug 13 01:40:38 2008 +0200
5450 serial: move CFG_SCIF_CONSOLE to CONFIG_SCIF_CONSOLE
5452 move also conditional compilation to Makefile
5454 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5456 commit d6e9ee92e890f67594ab150689510df361133ead
5457 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5458 Date: Wed Aug 13 01:40:38 2008 +0200
5460 common: Move conditional compilation to Makefile
5462 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5464 commit f5acb9fd9bba1160de3ef349c7d33fe510eda286
5465 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5466 Date: Wed Aug 13 01:40:09 2008 +0200
5468 mx31: move freescale's mx31 boards to vendor board dir
5470 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5472 commit 8ed2f5f950e2581214d20b011a8f27a6396d65d2
5473 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5474 Date: Sat Jul 5 23:11:11 2008 +0200
5476 at91: move arch-at91sam9 to arch-at91
5478 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
5480 commit 195ccfc5991d48764b2519941e3507f693851d5d
5481 Author: Fathi BOUDRA <fabo@debian.org>
5482 Date: Wed Aug 6 10:06:20 2008 +0200
5484 OneNAND: Fill in MTD function pointers for OneNAND.
5486 onenand_print_device_info():
5487 - Now returns a string to be placed in mtd->name,
5488 rather than calling printf.
5489 - Remove verbose parameter as it becomes useless.
5491 Signed-off-by: Fathi Boudra <fabo@debian.org>
5492 Signed-off-by: Scott Wood <scottwood@freescale.com>
5494 commit aa646643b6bc250cb3a4966bf728876e0c10d329
5495 Author: Guennadi Liakhovetski <lg@denx.de>
5496 Date: Wed Aug 6 21:42:07 2008 +0200
5498 nand_spl: Support page-aligned read in nand_load, use chipselect
5500 Supporting page-aligned reads doesn't incure any sinificant overhead, just
5501 a small change in the algorithm. Also replace in_8 with readb, since there
5504 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5505 Signed-off-by: Scott Wood <scottwood@freescale.com>
5507 commit 4f32d7760a58fe73981b6edc0b0751565d2daa4c
5508 Author: Scott Wood <scottwood@freescale.com>
5509 Date: Tue Aug 5 11:15:59 2008 -0500
5511 NAND boot: Update large page support for current API.
5513 Also, remove the ctrl variable in favor of passing the constants
5514 directly, and remove redundant (u8) casts.
5516 Signed-off-by: Scott Wood <scottwood@freescale.com>
5518 commit e4c09508545d1c45617ba45391c03c03cbc360b9
5519 Author: Scott Wood <scottwood@freescale.com>
5520 Date: Mon Jun 30 14:13:28 2008 -0500
5522 NAND boot: MPC8313ERDB support
5524 Note that with older board revisions, NAND boot may only work after a
5525 power-on reset, and not after a warm reset. I don't have a newer board
5526 to test on; if you have a board with a 33MHz crystal, please let me know
5527 if it works after a warm reset.
5529 Signed-off-by: Scott Wood <scottwood@freescale.com>
5531 commit acdab5c33f1ea6f5e08f06f08bc64af23ff40d71
5532 Author: Scott Wood <scottwood@freescale.com>
5533 Date: Thu Jun 26 14:06:52 2008 -0500
5535 mpc8313erdb: Enable NAND in config.
5537 Signed-off-by: Scott Wood <scottwood@freescale.com>
5539 commit c3db8c649c6ab3da2f1411c4c6d61aecea054aa4
5540 Author: Guennadi Liakhovetski <lg@denx.de>
5541 Date: Thu Jul 31 12:38:26 2008 +0200
5543 NAND: Do not write or read a whole block if it is larger than the environment
5545 Environment can be smaller than NAND block size, do not need to read a whole
5546 block and minimum for writing is one page. Also remove an unused variable.
5548 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
5549 Signed-off-by: Scott Wood <scottwood@freescale.com>
5551 commit eafcabd15f00c142156235c519fcc55b10993241
5552 Author: Marcel Ziswiler <marcel@ziswiler.com>
5553 Date: Sun Jun 22 16:30:06 2008 +0200
5555 NAND: chip->state does not always get set.
5557 Fixes an issue with chip->state not always being set causing troubles.
5559 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
5560 Signed-off-by: Scott Wood <scottwood@freescale.com>
5562 commit 13f0fd94e3cae6f8a0d9fba5d367e311edc8ebde
5563 Author: Ilya Yanok <yanok@emcraft.com>
5564 Date: Mon Jun 30 15:34:40 2008 +0200
5566 NAND: Scan bad blocks lazily.
5568 Rather than scanning on boot, scan upon the first attempt to check the
5569 badness of a block. This speeds up boot when not using NAND, and reduces
5570 the likelihood of needing to reflash via JTAG if NAND becomes
5573 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
5574 Signed-off-by: Scott Wood <scottwood@freescale.com>
5576 commit dfbf617ff055e4216f78d358b0867c548916d14b
5577 Author: Scott Wood <scottwood@freescale.com>
5578 Date: Thu Jun 12 13:20:16 2008 -0500
5582 Implement block-skipping read/write, based on a patch from
5583 Morten Ebbell Hestens <morten.hestnes@tandberg.com>.
5585 Signed-off-by: Morten Ebbell Hestnes <morten.hestnes@tandberg.com>
5586 Signed-off-by: Scott Wood <scottwood@freescale.com>
5588 commit 984e03cdf1431bb593aeaa1b74c445d616f955d3
5589 Author: Scott Wood <scottwood@freescale.com>
5590 Date: Thu Jun 12 13:13:23 2008 -0500
5592 NAND: Always skip blocks on read/write/boot.
5594 Use of the non-skipping versions was almost always (if not always)
5595 an error, and no valid use case has been identified.
5597 Signed-off-by: Scott Wood <scottwood@freescale.com>
5599 commit e1c3dbada349992875934575c97b328ab2cb33ca
5600 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5601 Date: Thu Jun 12 11:10:21 2008 -0500
5603 nand: fsl_upm: convert to updated MTD NAND infrastructure
5605 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5606 Signed-off-by: Scott Wood <scottwood@freescale.com>
5608 commit 300253306acc72b1b2e9faf0987f86551151d7cf
5609 Author: Scott Wood <scottwood@freescale.com>
5610 Date: Thu May 22 15:02:46 2008 -0500
5612 fsl_elbc_nand: Hard-code the FBAR/FPAR split.
5614 The hardware has separate registers for block and page-within-block,
5615 but the division between the two has no apparent relation to the
5616 actual erase block size of the NAND chip.
5618 Signed-off-by: Scott Wood <scottwood@freescale.com>
5620 commit 9c814b0a716aae884bec977b9a032dfa59cfb79a
5621 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
5622 Date: Fri Mar 28 22:10:54 2008 +0300
5624 fsl_elbc_nand: workaround for hangs during nand write
5626 Using current driver elbc sometimes hangs during nand write. Reading back
5627 last byte helps though (thanks to Scott Wood for the idea).
5629 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
5630 Signed-off-by: Scott Wood <scottwood@freescale.com>
5632 commit 9fd020d6b4b36b9fb67cd834bc1ae7fdba15ee9e
5633 Author: Scott Wood <scottwood@freescale.com>
5634 Date: Fri Mar 21 16:12:51 2008 -0500
5636 Freescale eLBC FCM NAND driver
5638 This is a driver for the Flash Control Machine of the enhanched Local Bus
5639 Controller found on some Freescale chips (such as the mpc8313 and the
5642 Signed-off-by: Scott Wood <scottwood@freescale.com>
5644 commit 41ef8c716e93fdf50efe9c1ba733ca6675daaca6
5645 Author: Scott Wood <scottwood@freescale.com>
5646 Date: Tue Mar 18 15:29:14 2008 -0500
5648 Don't panic if a controller driver does ecc its own way.
5650 Some hardware, such as the enhanced local bus controller used on some
5651 mpc83xx chips, does ecc transparently when reading and writing data, rather
5652 than providing a generic calculate/correct mechanism that can be exported to
5655 The subsystem should not BUG() when calculate, correct, or hwctl are
5656 missing, if the methods that call them have been overridden.
5658 Signed-off-by: Scott Wood <scottwood@freescale.com>
5660 commit e52b34d40a8a646e3d11638ea8797e96398dba13
5661 Author: Stefan Roese <sr@denx.de>
5662 Date: Thu Jan 10 18:47:33 2008 +0100
5664 NAND: Make NAND driver less verbose per default
5666 This patch turns off printing of bad blocks per default upon bootup.
5667 This can always be shown via the "nand bad" command later.
5669 Signed-off-by: Stefan Roese <sr@denx.de>
5671 commit fe56a2772e5c59577df906163d0d4b29b056140e
5672 Author: Sergey Kubushyn <ksi@koi8.net>
5673 Date: Wed Jan 9 15:36:20 2008 +0100
5675 NAND: Davinci driver updates
5677 Here comes a trivial patch to cpu/arm926ejs/davinci/nand.c. Unfortunately I
5678 don't have hardware handy so I can not test it at the moment but changes are
5679 rather trivial so it should work. It would be nice if somebody with a
5680 hardware checked it anyways.
5682 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
5684 commit deac913effd8d80535c9ff4687b6fcdff540c554
5685 Author: Stefan Roese <sr@denx.de>
5686 Date: Sat Jan 5 16:50:32 2008 +0100
5688 NAND: Fix compilation warning and small coding style issue
5690 Signed-off-by: Stefan Roese <sr@denx.de>
5692 commit c568f77acdf896fc3dd6413ce53205b17ba809a3
5693 Author: Stefan Roese <sr@denx.de>
5694 Date: Sat Jan 5 16:49:37 2008 +0100
5696 NAND: Update nand_spl driver to match updated nand subsystem
5698 This patch changes the NAND booting driver nand_spl/nand_boot.c to match
5699 the new infrastructure from the updated NAND subsystem. This NAND
5700 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
5703 Signed-off-by: Stefan Roese <sr@denx.de>
5705 commit 3df2ece0f0fbba47d27f02fff96c533732b98c14
5706 Author: Stefan Roese <sr@denx.de>
5707 Date: Sat Jan 5 16:47:58 2008 +0100
5709 NAND: Update 4xx NDFC driver to match updated nand subsystem
5711 This patch changes the 4xx NAND driver ndfc.c to match the new
5712 infrastructure from the updated NAND subsystem. This NAND
5713 subsystem was recently synced again with the Linux 2.6.22 MTD/NAND
5716 Tested successfully on AMCC Sequoia and Bamboo.
5718 Signed-off-by: Stefan Roese <sr@denx.de>
5720 commit 12072264528eba33737bc9674e19f0e925ffda23
5721 Author: Stefan Roese <sr@denx.de>
5722 Date: Sat Jan 5 16:43:25 2008 +0100
5724 NAND: Change nand_wait_ready() to not call nand_wait()
5726 This patch changes nand_wait_ready() to not just call nand_wait(),
5727 since this will send a new command to the NAND chip. We just want to
5728 wait for the chip to become ready here.
5730 Signed-off-by: Stefan Roese <sr@denx.de>
5732 commit 9ad754fef5053144daed3b007adaf1c9bec654c9
5733 Author: William Juul <william.juul@datarespons.no>
5734 Date: Fri Dec 14 16:33:45 2007 +0100
5736 make nand dump and nand dump.oob work
5738 Signed-off-by: William Juul <william.juul@tandberg.com>
5739 Signed-off-by: Scott Wood <scottwood@freescale.com>
5741 commit 43ea36fb8fdcbc6e26f0caffe808c63633b18838
5742 Author: William Juul <william.juul@datarespons.no>
5743 Date: Mon Nov 19 14:46:00 2007 +0100
5745 moving files from yaffs2/direct/ to yaffs2/ and deleting all symlinks
5747 Signed-off-by: William Juul <william.juul@tandberg.com>
5749 commit 98824ce3f95e6c4d08d439b779c0acb0048045a6
5750 Author: William Juul <william.juul@tandberg.com>
5751 Date: Tue Jun 10 16:18:13 2008 -0500
5753 Clean out unneeded files
5755 Signed-off-by: William Juul <william.juul@tandberg.com>
5757 commit ec29a32b5a71b203f7d9087f1f4d786e7f13dd23
5758 Author: William Juul <william.juul@datarespons.no>
5759 Date: Fri Nov 16 08:44:27 2007 +0100
5761 Create symlinks from yaffs2/direct to yaffs2
5763 Signed-off-by: William Juul <william.juul@tandberg.com>
5765 commit 90ef117b68387d66763291af0117677644166611
5766 Author: William Juul <william.juul@datarespons.no>
5767 Date: Thu Nov 15 12:23:57 2007 +0100
5769 Incorporate yaffs2 into U-boot
5771 To use YAFFS2 define CONFIG_YAFFS2
5773 Signed-off-by: William Juul <william.juul@tandberg.com>
5774 Signed-off-by: Scott Wood <scottwood@freescale.com>
5776 commit 0e8cc8bd92257da2e1df88cbc985e166e472ce61
5777 Author: William Juul <william.juul@datarespons.no>
5778 Date: Thu Nov 15 11:13:05 2007 +0100
5782 Direct import of yaffs as a tarball as of 20071113 from their public
5783 CVS-web at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/yaffs2/
5785 The code can also be imported on the command line with:
5786 export CVSROOT=:pserver:anonymous@cvs.aleph1.co.uk:/home/aleph1/cvs cvs logon
5787 (Hit return when asked for a password)
5790 Signed-off-by: William Juul <william.juul@tandberg.com>
5791 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
5793 commit 3043c045d5a9897faba7d5c7218c2f4d06cd0038
5794 Author: William Juul <william.juul@datarespons.no>
5795 Date: Wed Nov 14 14:28:11 2007 +0100
5797 Whitespace cleanup and marking broken code.
5799 Changes requested by maintainer Stefan Roese after
5800 posting patch to U-boot mailing list.
5802 Signed-off-by: William Juul <william.juul@tandberg.com>
5803 Signed-off-by: Scott Wood <scottwood@freescale.com>
5805 commit 5e1dae5c3db7f4026f31b6a2a81ecd9e9dee475f
5806 Author: William Juul <william.juul@datarespons.no>
5807 Date: Fri Nov 9 13:32:30 2007 +0100
5809 Fixing coding style issues
5811 - Fixing leading white spaces
5812 - Fixing indentation where 4 spaces are used instead of tab
5813 - Removing C++ comments (//), wherever I introduced them
5815 Signed-off-by: William Juul <william.juul@tandberg.com>
5816 Signed-off-by: Scott Wood <scottwood@freescale.com>
5818 commit 4cbb651b29cb64d378a06729970e1e153bb605b1
5819 Author: William Juul <william.juul@datarespons.no>
5820 Date: Thu Nov 8 10:39:53 2007 +0100
5822 Remove white space at end.
5824 Signed-off-by: William Juul <william.juul@tandberg.com>
5825 Signed-off-by: Scott Wood <scottwood@freescale.com>
5827 commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b
5828 Author: William Juul <william.juul@datarespons.no>
5829 Date: Wed Oct 31 13:53:06 2007 +0100
5831 Update MTD to that of Linux 2.6.22.1
5833 A lot changed in the Linux MTD code, since it was last ported from
5834 Linux to U-Boot. This patch takes U-Boot NAND support to the level
5835 of Linux 2.6.22.1 and will enable support for very large NAND devices
5836 (4KB pages) and ease the compatibility between U-Boot and Linux
5839 This patch is tested on two custom boards with PPC and ARM
5840 processors running YAFFS in U-Boot and Linux using gcc-4.1.2
5843 MAKEALL ppc/arm has some issues:
5844 * DOC/OneNand/nand_spl is not building (I have not tried porting
5845 these parts, and since I do not have any HW and I am not familiar
5846 with this code/HW I think its best left to someone else.)
5848 Except for the issues mentioned above, I have ported all drivers
5849 necessary to run MAKEALL ppc/arm without errors and warnings. Many
5850 drivers were trivial to port, but some were not so trivial. The
5851 following drivers must be examined carefully and maybe rewritten to
5854 cpu/arm926ejs/davinci/nand.c
5856 board/zylonite/nand.c
5858 Signed-off-by: William Juul <william.juul@tandberg.com>
5859 Signed-off-by: Stig Olsen <stig.olsen@tandberg.com>
5860 Signed-off-by: Scott Wood <scottwood@freescale.com>
5862 commit cd82919e6c8a73b363a26f34b734923844e52d1c
5863 Author: Wolfgang Denk <wd@denx.de>
5864 Date: Tue Aug 12 16:08:38 2008 +0200
5866 Coding style cleanup, update CHANGELOG, prepare release
5868 Signed-off-by: Wolfgang Denk <wd@denx.de>
5870 commit 17e900b8c0f38d922da47073246219dce2a847f2
5871 Author: Wolfgang Denk <wd@denx.de>
5872 Date: Tue Aug 12 14:54:04 2008 +0200
5874 MVBC_P: fix compile problem
5876 Signed-off-by: Wolfgang Denk <wd@denx.de>
5878 commit 52b047ae48219b59bebe37ba743ab103fd4f8316
5879 Author: Wolfgang Denk <wd@denx.de>
5880 Date: Tue Aug 12 12:10:11 2008 +0200
5882 MPC8272ADS: fix build error: 'bd_t' has no member named 'pci_clk'
5884 Signed-off-by: Wolfgang Denk <wd@denx.de>
5886 commit c9c101c660b3d1995045c61c7c6041f52b6cf335
5887 Author: Wolfgang Denk <wd@denx.de>
5888 Date: Tue Aug 12 00:36:53 2008 +0200
5890 ads5121: fix compiler warnings (unused variables)
5892 Signed-off-by: Wolfgang Denk <wd@denx.de>
5894 commit 902ca09246039964d59bbcb519b1e1b5aed01308
5895 Author: Kumar Gala <galak@kernel.crashing.org>
5896 Date: Mon Aug 11 11:29:28 2008 -0500
5898 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
5900 Use CONFIG_NUM_CPUS to match existing define used by 86xx.
5902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5903 Acked-by: Jon Loeliger <jdl@freescale.com>
5905 commit 3216ca9692ff80d7c638723ef448f3d36301d9e7
5906 Author: Kumar Gala <galak@kernel.crashing.org>
5907 Date: Mon Aug 11 09:20:53 2008 -0500
5909 Fix fallout from autostart revert
5911 The autostart revert caused a bit of duplicated code as well as
5912 code that was using images->autostart that needs to get removed so
5915 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5917 commit 3cf8a234b8e8c02e4da1f23566043bc288b05220
5918 Author: Kumar Gala <galak@kernel.crashing.org>
5919 Date: Mon Aug 11 09:16:25 2008 -0500
5921 Fix compile error related to r8a66597-hcd & usb
5923 When building the 8544DS board we get this error:
5925 In file included from r8a66597-hcd.c:22:
5926 u-boot/include/usb.h:190:2: error: #error USB Lowlevel not defined
5927 make[1]: *** [r8a66597-hcd.o] Error 1
5929 The cleanest fix is to only build r8a66597-hcd.c if CONFIG_USB_R8A66597_HCD
5932 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5934 commit 2d0daa03612338a813e3c9d22680e54eabfea378
5935 Author: Becky Bruce <becky.bruce@freescale.com>
5936 Date: Mon Aug 4 14:02:26 2008 -0500
5938 POWERPC 86xx: Move BAT setup code to C
5940 This is needed because we will be possibly be locating
5941 devices at physical addresses above 32bits, and the asm
5942 preprocessing does not appear to deal with ULL constants
5943 properly. We now call write_bat in lib_ppc/bat_rw.c.
5945 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
5946 Acked-by: Jon Loeliger <jdl@freescale.com>
5948 commit 9de67149db576c91b9c2a0a182652331e7e44211
5949 Author: Becky Bruce <becky.bruce@freescale.com>
5950 Date: Mon Aug 4 14:01:53 2008 -0500
5952 POWERPC: Add synchronization to write_bat in lib_ppc/bat_rw.c
5954 Perform sync/isync as required by the architecture.
5956 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
5957 Acked-by: Jon Loeliger <jdl@freescale.com>
5959 commit 23f935c073e7578c6066804fd2f9ee116cae6ffe
5960 Author: Becky Bruce <becky.bruce@freescale.com>
5961 Date: Mon Aug 4 14:01:16 2008 -0500
5963 POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config
5965 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
5966 Acked-by: Jon Loeliger <jdl@freescale.com>
5968 commit 5276a3584d26a9533404f0ec00c3b61cf9a97939
5969 Author: Magnus Lilja <lilja.magnus@gmail.com>
5970 Date: Sun Aug 3 21:44:10 2008 +0200
5972 i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.
5974 Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
5975 contacts instead of only the first 256 ones as is the case prior to
5978 Add missing MUX_* macros and update board files to use the new macros.
5980 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
5982 commit b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac
5983 Author: Magnus Lilja <lilja.magnus@gmail.com>
5984 Date: Sun Aug 3 21:43:37 2008 +0200
5986 i.MX31: Fix IOMUX related typos
5988 Correct the names of some IOMUX macros.
5990 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
5992 commit 4d57b0fb2927d4f50d834884b4ec4a7ca01708b0
5993 Author: Steve Sakoman <steve@sakoman.com>
5994 Date: Mon Aug 11 20:26:16 2008 +0200
5996 OneNAND: Remove unused parameters to onenand_verify_page
5998 The block and page parameters of onenand_verify_page() are not used. This causes a compiler error when CONFIG_MTD_ONENAND_VERIFY_WRITE is enabled.
6000 Signed-off-by: Steve Sakoman <steve@sakoman.com>
6001 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6003 commit e84d568fa2a9f4ce7888141e71676368ef6b3f25
6004 Author: Anatolij Gustschin <agust@denx.de>
6005 Date: Fri Aug 8 18:00:40 2008 +0200
6007 video: fix bug in cfb_console code
6009 FILL_15BIT_555RGB macro extension for pixel swapping
6010 by commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
6011 introduced a bug in cfb_console:
6013 Bitmaps with odd-numbered width won't be rendered
6014 correctly and even U-Boot crashes are observed on
6015 some platforms while repeated rendering of such
6016 bitmaps with "bmp display". Also if a bitmap is
6017 rendered to an odd-numbered x starting position,
6018 the same problem occurs. This patch is an attempt
6021 Signed-off-by: Anatolij Gustschin <agust@denx.de>
6023 commit d9015f6a50d7258125349ef5c2af836458a0029a
6024 Author: Anatolij Gustschin <agust@denx.de>
6025 Date: Fri Aug 8 18:00:39 2008 +0200
6027 video: fix bug in logo_plot
6029 If logo_plot() should ever be called with x starting
6030 position other than zero and for pixel depths greater
6031 than 8bpp, logo colors distortion will be observed.
6032 This patch fixes the issue.
6034 Signed-off-by: Anatolij Gustschin <agust@denx.de>
6036 commit 406819ae94f79f5b59e01d163380ca7d83709251
6037 Author: Wolfgang Denk <wd@denx.de>
6038 Date: Mon Aug 11 00:17:52 2008 +0200
6040 MAINTAINERS: sort entries
6042 Signed-off-by: Wolfgang Denk <wd@denx.de>
6044 commit cfc442d7913d4d1c3a9bf494f90c012c2f8c3bdc
6045 Author: Roy Zang <tie-fei.zang@freescale.com>
6046 Date: Thu Aug 7 18:19:28 2008 +0800
6048 Add mpc7448hpc2 maintainer information
6050 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
6052 commit a9fe0c3e7ca48afa50d6a0db99fa91e7282d73d8
6053 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
6054 Date: Thu Aug 7 13:13:27 2008 +0530
6056 common/cmd_load.c - Minor code & Coding Style cleanup
6058 - os_data_header Variable is a carry over feature
6059 & unused. So removed all instance of this variable
6060 - Minor Code Style Update
6062 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
6063 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6065 commit 0d28f34bbe56d0971bd603789dcc6fe7adf11f14
6066 Author: Magnus Lilja <lilja.magnus@gmail.com>
6067 Date: Wed Aug 6 19:32:33 2008 +0200
6069 Update the U-Boot wiki URL.
6071 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
6073 commit aa5ffa16d7e4c461b7b77bf8e79d2ef5638cf754
6074 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
6075 Date: Sun Aug 10 17:56:36 2008 +0200
6077 OneNAND: Remove base address offset usage
6079 While locally preparing some U-Boot patches for ARM based OMAP3 boards, some
6080 using OneNAND and some using NAND, we found some differences in OneNAND and
6081 NAND command address handling.
6083 As this might confuse users (it already confused us), we like to align OneNAND
6084 and NAND address handling.
6086 The issue is that cmd_onenand.c subtracts the onenand base address from the
6087 addresses you type into the u-boot command line so, unlike nand, you can't
6088 use addresses relative to the start of the onenand part e.g. this won't work:
6090 onenand read 82000000 280000 400000
6094 onenand read 82000000 20280000 400000
6096 Looking at recent git, the only board currently using OneNAND is Apollon, and
6097 for this the OneNAND base address is 0 (apollon.h)
6099 #define CFG_ONENAND_BASE 0x00000000
6101 so patch below won't break any existing boards and will align OneNAND and NAND
6102 handling on boards where OneNAND base address is != 0.
6104 Signed-off-by: Steve Sakoman <sakoman@gmail.com>
6105 Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
6106 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
6108 commit c11528083ef6e55e76df742228c26e39d151813d
6109 Author: Kumar Gala <galak@kernel.crashing.org>
6110 Date: Thu Aug 7 09:28:20 2008 -0500
6112 mpc85xx: workaround old binutils bug
6114 The recent change to move the .bss outside of the image gives older
6115 binutils (ld from eldk4.1/binutils-2.16) some headache:
6117 ppc_85xx-ld: u-boot: Not enough room for program headers (allocated 3, need 4)
6118 ppc_85xx-ld: final link failed: Bad value
6120 We workaround it by being explicit about the program headers and not
6121 assigning the .bss to a program header.
6123 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6125 commit 0bf202ec586d4466c900e987720fa635c594d689
6126 Author: Wolfgang Denk <wd@denx.de>
6127 Date: Sun Aug 10 01:26:26 2008 +0200
6129 Revert "[new uImage] Add autostart flag to bootm_headers structure"
6131 This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.
6133 The commit was based on a misunderstanding of the (documented)
6134 meaning of the 'autostart' environment variable. It might cause
6135 boards to hang if 'autostart' was used, with the potential to brick
6136 them. Go back to the documented behaviour.
6144 Signed-off-by: Wolfgang Denk <wd@denx.de>
6146 commit 29f8f58ff40c67f7f2e11afd1715173094e52ac2
6147 Author: Wolfgang Denk <wd@denx.de>
6148 Date: Sat Aug 9 23:17:32 2008 +0200
6150 TQM8xx{L,M}: try to normalize config files for TQM8xx? based board
6152 - enable CFI driver where this was forgotten
6153 - enable mtdparts support
6154 - adjust default environment
6157 Signed-off-by: Wolfgang Denk <wd@denx.de>
6159 commit 41266c9b5a5f873df3ec891bb0907616958b5602
6160 Author: Peter Tyser <ptyser@xes-inc.com>
6161 Date: Tue Aug 5 10:51:57 2008 -0500
6163 FIT: Fix handling of images without ramdisks
6165 boot_get_ramdisk() should not treat the case when a FIT image does
6166 not contain a ramdisk as an error.
6168 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
6169 Acked-by: Michal Simek <monstr@monstr.eu>
6171 commit f77d92a3f56d88e63cc02226a1204b3bdbac6961
6172 Author: Sergey Lapin <slapin@ossfans.org>
6173 Date: Sat Aug 9 01:39:09 2008 +0400
6175 DataFlash: AT45DB021 fix and AT45DB081 support
6177 Fix for page size of AT45DB021. Also adding bigger AT45DB081
6178 which comes with some newer boards.
6180 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
6182 commit ba9324451b662dd393afa53e5cc36fc5d3d10966
6183 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6184 Date: Fri Aug 8 16:30:23 2008 +0900
6186 sh: Update sh7763rdp config
6188 Add sh_eth support to sh7763rdp.
6190 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6192 commit 21f971ec265f6042ec21636d55d06a6bc0751077
6193 Author: Wolfgang Denk <wd@denx.de>
6194 Date: Mon Jul 7 01:22:29 2008 +0200
6196 TQM823L: re-enable logo support; update LCD_INFO text
6198 Signed-off-by: Wolfgang Denk <wd@denx.de>
6200 commit 3b8d17f0f082073346c0df017c9dfd6acdb40d6d
6201 Author: Wolfgang Denk <wd@denx.de>
6202 Date: Fri Aug 8 16:41:56 2008 +0200
6204 TQM8xxL: fix support for second flash bank
6206 When switching the TQM8xxL modules to use the CFI flash driver,
6207 support for the second flash bank was broken because the CFI driver
6208 did not support dynamically sized banks. This gets fixed now.
6210 Signed-off-by: Wolfgang Denk <wd@denx.de>
6212 commit 2a112b234d879f6390503a5f4e38246acce9d0b0
6213 Author: Wolfgang Denk <wd@denx.de>
6214 Date: Fri Aug 8 16:39:54 2008 +0200
6216 CFI: allow for dynamically determined flash sizes and addresses
6218 The CFI driver allowed only for static initializers in the
6219 CFG_FLASH_BANKS_LIST definition, i. e. it did not allow to map
6220 several flash banks contiguously if the bank sizes were not known in
6221 advance, which kind of violates U-Boot's design philosophy.
6223 (will be used for example by the TQM8xxL boards)
6225 Signed-off-by: Wolfgang Denk <wd@denx.de>
6227 commit d9d78ee46d9a396d0a81d00c2b003a9bd32c2e61
6228 Author: Ben Warren <biggerbadderben@gmail.com>
6229 Date: Thu Aug 7 23:26:35 2008 -0700
6231 QE UEC: Fix compiler warnings
6233 Moved static functions earlier in file so forward declarations are not needed.
6235 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6237 commit d5d28fe4aad5f4535400647a5617c11039506467
6238 Author: David Saada <David.Saada@ecitele.com>
6239 Date: Mon Mar 31 02:37:38 2008 -0700
6241 QE UEC: Add MII Commands
6243 Add MII commands to the UEC driver. Note that once a UEC device is selected,
6244 any device on its MDIO bus can be addressed.
6246 Signed-off-by: David Saada <david.saada@ecitele.com>
6247 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6249 commit fd0f2f3796ff2a7a32d35deb1b7996e485849df7
6250 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6251 Date: Wed Jul 9 21:07:38 2008 +0900
6253 usb: add support for R8A66597 usb controller
6255 add support for Renesas R8A66597 usb controller.
6256 This patch supports USB Host mode.
6258 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
6259 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
6261 commit 1d10dcd041aaeae9fd7c821005692898a0303382
6262 Author: Hunter, Jon <jon-hunter@ti.com>
6263 Date: Sat Jul 26 18:59:16 2008 -0500
6265 Add support for OMAP5912 and OMAP16xx to usbdcore_omap1510.c
6267 Add support to drivers/usb/usbdcore_omap1510.c for OMAP5912 and OMAP16xx devices.
6269 Signed-off-by: Jon Hunter <jon-hunter@ti.com>
6270 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
6272 commit eab1007334b93a6209f1ec33615e26ef5311ede7
6273 Author: Steven A. Falco <sfalco@harris.com>
6274 Date: Wed Aug 6 15:42:52 2008 -0400
6276 ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as per schematic.
6278 The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
6279 configuration to match the schematic, and also sets the SDR0_PFC1 register to
6280 select the corresponding mode for the UARTs.
6282 Signed-off-by: Steven A. Falco <sfalco@harris.com>
6283 Signed-off-by: Stefan Roese <sr@denx.de>
6285 commit 0eb5717a85b6cba3f67c11fa89bdde38dcd081b5
6286 Author: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
6287 Date: Wed Aug 6 14:42:13 2008 +0200
6289 avr32: add support for EarthLCD Favr-32 board
6291 This patch adds support for the Favr-32 board made by EarthLCD.
6293 This kit, which is also called ezLCD-101 when running with EarthLCD firmware,
6294 has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash,
6295 Ethernet, audio out, USB device, SD-card slot, USART and various other
6296 connectors for cennecting stuff to SPI, I2C, GPIO, etc.
6298 Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
6299 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6301 commit bc9019e19758a19a388fb20ef18dc771cd39fdda
6302 Author: Rafael Campos <rafael.campos@hanscan.com>
6303 Date: Thu Jul 31 10:22:20 2008 +0200
6305 cfi-flash: Added support to flash_real_protect for Atmel flash devices
6307 Some of the flash memories produced by ATMEL start in read-only mode.
6308 We need to unprotect it. This patch allows the AT49BV6416 to work with
6309 cfi_flash memories. Tested in the at91rm9200ek board.
6311 Signed-off-by: Rafael Campos Las Heras <rafael.campos@hanscan.com>
6312 Signed-off-by: Stefan Roese <sr@denx.de>
6314 commit 7949839e5836bf8b1074bb6142c46d30ac3aa350
6315 Author: Guennadi Liakhovetski <lg@denx.de>
6316 Date: Tue Aug 5 15:36:39 2008 +0200
6318 cfi-flash: Add definition for the AM29LV800BB AMD NOR-flash
6320 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6321 Signed-off-by: Stefan Roese <sr@denx.de>
6323 commit 1318673045fe188c6e24c582b1e6efc00ae1c62c
6324 Author: Stefan Roese <sr@denx.de>
6325 Date: Wed Aug 6 14:06:03 2008 +0200
6329 Signed-off-by: Stefan Roese <sr@denx.de>
6331 commit f2302d4430e7f3f48308d6a585320fe96af8afbd
6332 Author: Stefan Roese <sr@denx.de>
6333 Date: Wed Aug 6 14:05:38 2008 +0200
6337 Signed-off-by: Stefan Roese <sr@denx.de>
6339 commit 6689484ccd43189322aaa5a1c6cd02cdd511ad7d
6340 Author: Kenneth Johansson <kenneth@southpole.se>
6341 Date: Tue Jul 15 12:13:38 2008 +0200
6343 mpc5121: Move iopin features from board specific to common files.
6345 And in the process eliminate some duplicate register defines.
6347 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
6349 commit ef11df6b66ecf5797e94ba322254b8fb7a4e2e12
6350 Author: John Rigby <jrigby@freescale.com>
6351 Date: Tue Aug 5 17:38:57 2008 -0600
6353 mpc5121: squash some fdt fixup errors
6355 On ADS5121 when booting linux the following errors are seen:
6356 Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
6357 Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
6358 Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND
6360 This is caused by ft_cpu_setup trying to deal with
6361 both old and new soc node naming. This patch
6362 fixes this by being smarter about what to
6365 Also do soc node fixups by compatible instead of by path.
6366 A new board config called OF_SOC_COMPAT defined
6367 to be "fsl,mpc5121-immr" replaces the old
6368 OF_SOC node path that was defined to be "soc@80000000".
6370 Old device trees still work, but the compatiblity
6371 is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
6372 which is on by default in include/configs/ads5121.h.
6374 Signed-off-by: John Rigby <jrigby@freescale.com>
6376 commit 81091f58f0c58ecd26c5b05de2ae20ca6cdb521c
6377 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6378 Date: Sat Aug 2 23:48:30 2008 +0200
6380 drivers/serial: Move conditional compilation to Makefile for CONFIG_* macros
6382 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6384 commit 4cd7e6528f61ec669755c3754bb4f9779874fab3
6385 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6386 Date: Sat Aug 2 23:48:32 2008 +0200
6388 nios2/sysid: fix printf warning
6390 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6392 commit 66da6fa0e35e7ee56628c85981709afe7180fc8e
6393 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6394 Date: Sat Aug 2 23:48:33 2008 +0200
6396 Fix remaining build issues with MPC8xx FADS boards.
6398 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6400 commit 81d3f1fdddafd1eb53bbca8739f488d417eb3dd2
6401 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6402 Date: Sat Aug 2 23:48:31 2008 +0200
6404 nios2: fix phys_addr_t and phys_size_t support
6406 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6408 commit 5fa62000db6d0b46ecdeadbeb50faf5197db49ef
6409 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6410 Date: Sat Aug 2 23:48:34 2008 +0200
6412 mvbc_p: Fix problem with '#if (CONFIG_CMD_KGDB)'
6414 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6416 commit 1464eff77e7fdaed609ecf263a2423c9dcf96b1f
6417 Author: Mark Jackson <mpfj@mimc.co.uk>
6418 Date: Fri Aug 1 09:48:29 2008 +0100
6420 Fix bitmap display for atmel lcd controller
6422 The current lcd_display_bitmap() function does not work properly
6423 for the Atmel LCD controller.
6425 2 fixes need to be done:-
6427 (a) when setting the colour map, use the lcd_setcolreg() function
6428 as provided by the Atmel driver
6429 (b) the data is never actually written to the lcd framebuffer !!
6431 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6433 commit 2a433c66b1e2770349fe4911be23c375f053ebd8
6434 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6435 Date: Fri Aug 1 08:40:34 2008 +0200
6437 qemu_mips: update README to follow qemu update about default machine
6439 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6441 commit ac169d645f5f0e0b9a232563099209e92a355d8e
6442 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6443 Date: Thu Jul 31 19:53:21 2008 -0500
6445 ColdFire: Fix compilation issue caused by a missing function
6447 Implement usec2ticks() which is used by fsl_i2c.c in
6450 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6452 commit 01ae85b58b51d2fb1fac5b93095f6042cf48ae7b
6453 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6454 Date: Thu Jul 31 19:53:06 2008 -0500
6456 Fix compilation error for TASREG
6458 TASREG is ColdFire platform, the include ppc4xx.h in
6459 board/esd/common/flash.c causes conflict.
6461 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6463 commit 35d3bd3cc35c508a6823dac77e0fd126808e4fc7
6464 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6465 Date: Thu Jul 31 19:52:36 2008 -0500
6467 Fix compilation error for MCF5275
6469 Rename OBJ to COBJ in board/platform/Makefile
6471 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6473 commit 5c40548f01218360a1f1395198c50ff45f3035b5
6474 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6475 Date: Thu Jul 31 19:52:28 2008 -0500
6477 Fix compile error caused by incorrect function return type
6479 Rename int mii_init(void) to void mii_init(void) for idmr
6482 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
6484 commit a58c78067c928976c082c758d3987e89ead5b191
6485 Author: Wolfgang Denk <wd@denx.de>
6486 Date: Fri Aug 1 12:06:22 2008 +0200
6488 Fix build issues with MPC8xx FADS boards.
6490 Signed-off-by: Wolfgang Denk <wd@denx.de>
6492 commit 4b50cd12a3b3c644153c4cf393f4a4c12289e5aa
6493 Author: Wolfgang Denk <wd@denx.de>
6494 Date: Thu Jul 31 17:54:03 2008 +0200
6496 Prepare v1.3.4-rc2: update CHANGELOG
6498 Signed-off-by: Wolfgang Denk <wd@denx.de>
6500 commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4
6501 Author: Mark Jackson <mpfj@mimc.co.uk>
6502 Date: Thu Jul 31 16:09:00 2008 +0100
6504 Add gzipped logo support
6506 The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows:
6508 If this option is set, additionally to standard BMP
6509 images, gzipped BMP images can be displayed via the
6510 splashscreen support or the bmp command.
6512 However, the splashscreen function *only* supports standard BMP images.
6514 This patch adds the documented gzip support.
6516 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6518 commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac
6519 Author: Mark Jackson <mpfj@mimc.co.uk>
6520 Date: Thu Jul 31 15:56:48 2008 +0100
6522 Fix Atmel LCD controller endianess for AVR32 processors
6524 The Atmel lcd controller is used on Atmel's AT91 (little endian) and
6525 AVR32 (big endian) platforms.
6527 As such, the controller can handle both big and little endian memory.
6529 This patch fixes the driver for the AVR32 platform.
6531 Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
6533 commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1
6534 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6535 Date: Thu Jul 31 15:56:01 2008 +0200
6537 apollon: fix build out of tree
6539 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6541 commit 2e752be39d3e398d4ab89ffa6634c397df298297
6542 Author: Guennadi Liakhovetski <lg@denx.de>
6543 Date: Thu Jul 31 12:35:04 2008 +0200
6545 Uncompressed images loaded to their start address shall set load_end too
6547 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
6548 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
6550 commit c37207d7f51e19c17f859966f314e27cc1231801
6551 Author: Wolfgang Denk <wd@denx.de>
6552 Date: Wed Jul 16 16:38:59 2008 +0200
6554 Fix printf() format problems with configurable prompts
6556 U-Boot allows for configurable prompt strings using the
6557 CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far,
6558 the assumption was that any such user defined problts would contain
6559 exactly one "%d" format specifier. But some boards did not.
6561 To allow for flexible boot prompts without adding too complex code we
6562 now allow to specify the whole list of printf() arguments in the user
6563 definition. This is powerful, but requires a responsible user who
6564 really understands what he is doing, as he needs to know for exanple
6565 which variables are available in the respective context.
6567 Signed-off-by: Wolfgang Denk <wd@denx.de>
6569 commit 54754120637b6a7f4ff774fb199fc550bcfea1da
6570 Author: Wolfgang Denk <wd@denx.de>
6571 Date: Thu Jul 31 17:02:14 2008 +0200
6573 TQM85xx: fix typo introduce by commit ffbb5cb9
6575 Signed-off-by: Wolfgang Denk <wd@denx.de>
6577 commit 0b4951d4cddca9cc800745891c95b291e47cbbd7
6578 Author: Wolfgang Denk <wd@denx.de>
6579 Date: Thu Jul 31 15:27:01 2008 +0200
6581 mvbc_p board: fix most build warnings.
6583 Signed-off-by: Wolfgang Denk <wd@denx.de>
6585 commit c4ec6db074051d2f6fc76a66411c60621b22bc02
6586 Author: Wolfgang Denk <wd@denx.de>
6587 Date: Thu Jul 31 13:57:20 2008 +0200
6589 E1000: clean up CONFIG_E1000_FALLBACK_MAC handling
6591 Avoid "integer constant is too large for 'long' type" warnings.
6592 And simplify the code.
6594 Signed-off-by: Wolfgang Denk <wd@denx.de>
6596 commit 9196b44334c330cc13de2464c59181e4db71f549
6597 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
6598 Date: Wed Jul 30 23:21:19 2008 +0400
6600 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI
6602 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
6604 commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0
6605 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
6606 Date: Wed Jul 30 23:20:32 2008 +0400
6608 PPC: Add pci_clk in the global_data for CPM2 processors
6610 This patch adds pci_clk field to the global_data structure for the
6611 processors which have CPM2 module in case the CONFIG_PCI is defined.
6613 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
6615 commit f0ff885ca64655bee6540eb8a25eed90b1152686
6616 Author: Kumar Gala <galak@kernel.crashing.org>
6617 Date: Wed Jul 30 14:13:30 2008 -0500
6619 mpc85xx: Update linker scripts for Freescale boards
6621 * Move to using absolute addressing always. Makes the scripts a bit more
6623 * Moved .bss after the end of the image. These allows us to have more
6624 room in the resulting binary image for code and data.
6625 * Removed .text object files that aren't really needed
6626 * Make sure _end is 4-byte aligned as the .bss init code expects this.
6627 (Its possible that the end of .bss isn't 4-byte aligned)
6629 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6631 commit 57c219ad5d34dd9d49991777a62e3899595f2ec7
6632 Author: Kumar Gala <galak@kernel.crashing.org>
6633 Date: Wed Jul 30 08:01:15 2008 -0500
6635 Fix compile warnings in dlmalloc
6637 The origional code was using on odd reference to get to the first
6638 real element in av_[]. The first two elements of the array are
6639 not used for actual bins, but for house keeping. If we are more
6640 explicit about how use the first few elements we can get rid of the
6643 dlmalloc.c: In function 'malloc_extend_top':
6644 dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules
6645 dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules
6646 dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules
6649 The logic of how this code came to be is:
6650 bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ
6652 SIZE_SZ is the size of pointer, and av_ is arry of pointers so:
6653 bin_at(0) = &(av_[0])
6655 Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward.
6657 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6659 commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9
6660 Author: Stefan Roese <sr@denx.de>
6661 Date: Wed Jul 30 10:21:01 2008 +0200
6663 ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines
6665 Signed-off-by: Stefan Roese <sr@denx.de>
6667 commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5
6668 Author: Stefan Roese <sr@denx.de>
6669 Date: Wed Jul 30 09:59:51 2008 +0200
6671 cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)'
6673 A recent patch used '#if (CONFIG_CMD_USB)' instead of
6674 '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes
6675 common/bootm.c compile again.
6677 Signed-off-by: Stefan Roese <sr@denx.de>
6678 Acked-by: Markus Klotzbuecher <mk@denx.de>
6680 commit 2cb9080427fe641dcb71da46cd0634dd406f37ed
6681 Author: Kyungmin Park <kmpark@infradead.org>
6682 Date: Tue Jul 22 08:01:43 2008 +0900
6684 Remove unused I2C at apollon board
6686 There are no I2C devices on this board.
6688 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6690 commit 3c95960e526b3b026da20201db64526f46faf14b
6691 Author: Wolfgang Denk <wd@denx.de>
6692 Date: Thu Jul 31 10:12:09 2008 +0200
6694 at91rm9200dk, csb637: fix NAND related build problems
6696 Tried fixing NAND support for the at91rm9200dk board; untested.
6697 Disabled NAND support in the csb637 board config file.
6699 Signed-off-by: Wolfgang Denk <wd@denx.de>
6701 commit 9246f5ecfd353ae297a02ffd5328402acf16c9dd
6702 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6703 Date: Wed Jul 30 12:39:28 2008 +0200
6705 ppc4xx: ML507: Environment in flash and MTD Support
6707 - Relocate the location of U-Boot in the flash
6708 - Save the environment in one sector of the flash memory
6711 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6712 Signed-off-by: Stefan Roese <sr@denx.de>
6714 commit a8a16af4d59d14cc1c1187c10aaad80d6b8394b5
6715 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6716 Date: Tue Jul 29 17:16:10 2008 +0200
6718 ppc4xx: ML507: Use of get_ram_size in board ml507
6720 - Change suggested by WD
6722 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6723 Signed-off-by: Stefan Roese <sr@denx.de>
6725 commit 01a004313c5ec2d128b611df4c208b1b0d3c3fb4
6726 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6727 Date: Mon Jul 21 20:30:07 2008 +0200
6729 ppc4xx: ML507: U-Boot in flash and System ACE
6731 This patch allows booting from FLASH the ML507 board by Xilinx.
6732 Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF
6734 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
6735 Signed-off-by: Stefan Roese <sr@denx.de>
6737 commit 5c374c9ee16fee2bf68533cc4010b3c0df21f783
6738 Author: Julien May <mailinglist@miromico.ch>
6739 Date: Mon Jun 23 13:57:52 2008 +0200
6741 Add support for the hammerhead (AVR32) board
6743 The Hammerhead platform is built around a AVR32 32-bit microcontroller
6744 from Atmel. It offers versatile peripherals, such as ethernet, usb
6745 device, usb host etc.
6747 The board also incooperates a power supply and is a Power over Ethernet
6748 (PoE) Powered Device (PD).
6750 Additonally, a Cyclone III FPGA from Altera is integrated on the board.
6751 The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two
6752 DDR2 SDRAM interfaces, which will cover even the most exceptional need
6753 of memory bandwidth. Together with the onboard video decoder the board
6754 is ready for video processing.
6756 For more information see: http:///www.miromico.com/hammerhead
6758 Signed-off-by: Julien May <mailinglist@miromico.ch>
6759 [haavard.skinnemoen@atmel.com: various small fixes and adaptions]
6760 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6762 commit 09d318a8bb1444ec92e31cafcdba877eb9409e58
6763 Author: Kumar Gala <galak@kernel.crashing.org>
6764 Date: Tue Jul 29 12:23:49 2008 -0500
6766 fsl_i2c: Use timebase timer functions instead of get_timer()
6768 The current implementation of get_timer() is only really useful after we
6769 have relocated u-boot to memory. The i2c code is used before that as part
6770 of the SPD DDR setup.
6772 We actually have a bug when using the get_timer() code before relocation
6773 because the .bss hasn't been setup and thus we could be reading/writing
6774 a random location (probably in flash).
6776 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
6778 commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4
6779 Author: Frank Svendsbøe <frank.svendsboe@gmail.com>
6780 Date: Tue Jul 29 14:49:31 2008 +0200
6782 Adder8xx: Fix CFG_MONITOR_LEN
6784 Due to increased space usage, U-Boot can no longer be stored in three sectors.
6785 The current U-Boot use just over three flash sectors (197k), and U-Boot will
6786 become corrupt after saving environment variables. This patch adds another 64k
6789 Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com>
6791 commit a4c59ad4a21140550ada6f97690d2527c4146ce5
6792 Author: Kyungmin Park <kmpark@infradead.org>
6793 Date: Tue Jul 29 08:47:57 2008 +0900
6795 Add OneNAND IPL related files to gitignore
6797 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
6799 commit 8d87589e8e874df7120a3d9667f051bc33bac250
6800 Author: Rafal Jaworowski <raj@semihalf.com>
6801 Date: Mon Jul 28 20:38:25 2008 +0200
6803 API: Teach the storage layer about SATA and MMC options.
6805 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6806 Acked-by: Rafal Jaworowski <raj@semihalf.com>
6808 commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8
6809 Author: Rafal Jaworowski <raj@semihalf.com>
6810 Date: Mon Jul 28 20:37:48 2008 +0200
6812 API: Dump contents of sector 0 in the demo application.
6814 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6815 Acked-by: Rafal Jaworowski <raj@semihalf.com>
6817 commit 13ca6305f2eba49c175f6370c35286141059c789
6818 Author: Rafal Jaworowski <raj@semihalf.com>
6819 Date: Mon Jul 28 20:37:10 2008 +0200
6821 API: Correct storage enumeration routine, other minor fixes in API storage area.
6823 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6824 Acked-by: Rafal Jaworowski <raj@semihalf.com>
6826 commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8
6827 Author: Rafal Jaworowski <raj@semihalf.com>
6828 Date: Mon Jul 28 20:36:19 2008 +0200
6830 API: Fix compilation warnings in api_examples/demo.c.
6832 Signed-off-by: Rafal Czubak <rcz@semihalf.com>
6834 commit c14eefcc48212af2f3314809605698dd8393a90a
6835 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6836 Date: Sun Jul 27 17:09:43 2008 +0200
6838 Fix more printf() format warnings
6840 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6842 commit 936897d4d1365452bbbdf8430db5e7769ef08d38
6843 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6844 Date: Fri Jul 25 15:18:16 2008 +0200
6846 Fix remaining CFG_CMD_ define, ifdef and comments
6848 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
6850 commit 5d1d00fb36005482e1803a00ddc46efa11d719af
6851 Author: Stefano Babic <sbabic@denx.de>
6852 Date: Fri Jul 25 08:57:40 2008 +0200
6854 Add include for config.h in command.h.
6856 Because the cmd_tbl_s structure depends on the configuration file, it
6857 must be assured that config.h is included before the structure is
6858 evaluated by the compiler. If this is not certain, it could happen
6859 that the compiler generates structures of different size, depending
6860 on the fact if the source file includes <config.h> before or after
6863 The effect is that u-boot crashes when tries to relocate the command
6864 table (for ppc) or try to access to the command table for other
6867 The problem can happen on board-depending commands. All general
6868 commands under /common are unaffected, because they include already
6869 config.h before command.h.
6871 Signed-off-by: Stefano Babic <sbabic@denx.de>
6873 commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a
6874 Author: Scott Wood <scottwood@freescale.com>
6875 Date: Wed Jul 23 13:16:06 2008 -0500
6877 NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile.
6879 This fixes building out-of-tree.
6881 Signed-off-by: Scott Wood <scottwood@freescale.com>
6883 commit 36d59bd9da9e15d19b867b48449408830f4e2ad5
6884 Author: Heiko Schocher <hs@denx.de>
6885 Date: Wed Jul 23 07:30:46 2008 +0200
6887 Fix warnings if compiling with IDE support.
6889 cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior
6890 cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior
6892 Signed-off-by: Heiko Schocher <hs@denx.de>
6894 commit 7610db17fd4d59c51d825488526d85ede2f06767
6895 Author: Adrian Filipi <adrian.filipi@eurotech.com>
6896 Date: Tue Jul 22 14:28:11 2008 -0400
6898 Removed support for the adsvix board.
6900 Support for the adsvix was originally provided by Applied Data
6901 Systems (ADS), inc., now EuroTech, Inc.
6902 The board never shipped aside from some sample boards.
6904 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
6906 commit f96b44cef897bd372beb86dde1b33637c119d84d
6907 Author: Remy Bohmer <linux@bohmer.net>
6908 Date: Tue Jul 22 16:22:11 2008 +0200
6910 ARM: set GD_FLG_RELOC for boards skipping relocation to RAM
6912 If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually
6913 never set, because relocation to RAM is actually never done by U-boot
6914 itself. However, several pieces of code check if this flag is set at
6917 So, to make sure this flag is set on boards skipping relocation, this
6918 is added to the initialisation of U-boot at a moment where it is safe
6921 Signed-off-by: Remy Bohmer <linux@bohmer.net>
6923 commit e4dafff86f289b5677143a3e41da7b45c6d27fc7
6924 Author: Timur Tabi <timur@freescale.com>
6925 Date: Mon Jul 21 14:26:23 2008 -0500
6927 fsl-i2c: fix writes to data segment before relocation
6929 Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
6930 relocation. Commit d8c82db4 added the ability for i2c_init() to program the
6931 I2C bus speed and save the value in i2c_bus_speed[], which is a global
6932 variable. It is an error to write to the data segment before relocation,
6933 which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].
6935 Signed-off-by: Timur Tabi <timur@freescale.com>
6937 commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21
6938 Author: Wolfgang Ocker <weo@reccoware.de>
6939 Date: Mon Jul 28 16:56:51 2008 +0200
6941 mips: Fix baudrate divisor computation on alchemy cpus
6943 Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor
6946 Signed-off-by: Wolfgang Ocker <weo@reccoware.de>
6947 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
6949 commit c8c845cfdc6d0217135c1d5927eebd2b133a3314
6950 Author: Ben Warren <biggerbadderben@gmail.com>
6951 Date: Sat Jul 5 00:08:48 2008 -0700
6953 Moved initialization of AVR32 Ethernet controllers to board_eth_init()
6955 Renamed initialization functions for atngw100 and atstk1000.
6956 Removed initializations for these boards from net/eth.c
6958 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
6959 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6961 commit a229d291f33308ab7761d39f25fa1a53c0fc00a2
6962 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6963 Date: Wed Jul 23 10:55:46 2008 +0200
6965 spi flash: Fix printf() format warnings
6967 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6969 commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e
6970 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6971 Date: Wed Jul 23 10:55:31 2008 +0200
6973 atmel_mci: Fix printf() format warnings
6975 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6977 commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c
6978 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6979 Date: Wed Jul 23 10:55:15 2008 +0200
6981 avr32: Fix printf() format warnings
6983 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6985 commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4
6986 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6987 Date: Wed Jul 23 10:52:19 2008 +0200
6989 avr32: asm/io.h needs asm/types.h
6991 map_physmem() takes a phys_addr_t as parameter. This type is defined in
6992 asm/types.h, so we need to include that file.
6994 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
6996 commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6
6997 Author: Michal Simek <monstr@monstr.eu>
6998 Date: Thu Jul 17 12:25:46 2008 +0200
7000 microblaze: Fix printf() format issues
7002 Signed-off-by: Michal Simek <monstr@monstr.eu>
7004 commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0
7005 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
7006 Date: Thu Jul 17 07:27:51 2008 +0530
7008 Remove unused code from lib_arm/bootm.c
7010 Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in>
7012 commit ffbb5cb942e9856fa24e946977e0a60c64df04ab
7013 Author: Detlev Zundel <dzu@denx.de>
7014 Date: Wed Jul 16 18:56:45 2008 +0200
7016 tqm85xx: Demystify 'DK: !!!' comment
7018 Signed-off-by: Detlev Zundel <dzu@denx.de>
7020 commit b2f44ba570f3a01113bbb745daf46f3858d22f53
7021 Author: Detlev Zundel <dzu@denx.de>
7022 Date: Wed Jul 16 18:56:44 2008 +0200
7024 83xx/85xx/86xx: Add LTEDR local bus definitions
7026 Signed-off-by: Detlev Zundel <dzu@denx.de>
7028 commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494
7029 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7030 Date: Wed Jul 16 16:22:32 2008 +0200
7032 serial_xuartlite.c: fix compiler warnings
7034 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7035 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7037 commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9
7038 Author: Stefan Roese <sr@denx.de>
7039 Date: Fri Jul 18 11:03:35 2008 +0200
7041 POST: Add disable interrupts in some of the missing CPU POST tests
7043 Some CPU POST tests did not disable the interrupts while running. This
7044 seems to be necessary to protect this self modifying code.
7046 Signed-off-by: Stefan Roese <sr@denx.de>
7048 commit 97a3bf268d096e0e97e54048448c35114edcf557
7049 Author: Stefan Roese <sr@denx.de>
7050 Date: Fri Jul 18 10:43:24 2008 +0200
7052 ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL
7054 This is needed for boards that define CFG_64BIT_STRTOUL but don't define
7057 Signed-off-by: Stefan Roese <sr@denx.de>
7059 commit 0043ac55024963295fc79b39af85b6dc3b261e17
7060 Author: Niklaus Giger <niklaus.giger@netstal.com>
7061 Date: Fri Jul 18 11:22:23 2008 +0200
7063 POST PPC4xx/spr IVPR only if PPC440
7065 The SPR IVPR register is only present (as far as I know) for
7066 processors with a PPC440 core.
7068 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
7069 Acked-by: Stefan Roese <sr@denx.de>
7071 commit 1092fbd64748dfa2e979b102611ece9bc5ec1855
7072 Author: Stefan Roese <sr@denx.de>
7073 Date: Fri Jul 18 10:42:29 2008 +0200
7075 ppc4xx: Enable 64bit printf format on 440/460 platforms
7077 This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all
7078 440/460 platforms. This may be needed since those platforms support
7079 36bit physical address space.
7081 Signed-off-by: Stefan Roese <sr@denx.de>
7083 commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5
7084 Author: Stefan Roese <sr@denx.de>
7085 Date: Fri Jul 18 15:57:23 2008 +0200
7087 ppc4xx: Fix incorrect MODTx setup for some DIMM configurations
7089 This patch fixes a problem with incorrect MODTx (On Die Termination)
7090 setup for a configuration with multiple DIMM's and multiple ranks.
7091 Without this change Katmai was unable to boot Linux with DDR2 frequency
7092 >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux
7093 with DDR2 frequency = 640MHz and mem=4GB.
7095 Signed-off-by: Stefan Roese <sr@denx.de>
7097 commit 60204d06ed9f8c2a67cc79eb67fd2b1d22bcbc8c
7098 Author: Stefan Roese <sr@denx.de>
7099 Date: Fri Jul 18 12:24:41 2008 +0200
7101 ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support
7103 Signed-off-by: Stefan Roese <sr@denx.de>
7105 commit 086511fc96a8a9bb56e5e19a3d84c40f4dba80cc
7106 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7107 Date: Thu Jul 17 12:47:09 2008 +0200
7109 ppc4xx: ML507 Board Support
7111 The Xilinx ML507 Board is a Virtex 5 prototyping board that includes,
7113 -Virtex 5 FX FPGA (With a ppc440x5 in it)
7118 -Serial ATA connectors
7119 -RS232 Level Conversors
7120 -Ethernet Transceiver
7122 This patch gives support to a standard design produced by EDK for this
7123 board: ppc440, uartlite, xilinx_int and flash
7125 - Includes Changes propossed by Stefan Roese and Michal Simek
7127 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7128 Acked-by: Stefan Roese <sr@denx.de>
7130 commit d865fd09809a3a18669f35f970781820af40e4de
7131 Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7132 Date: Thu Jul 17 11:44:12 2008 +0200
7134 ppc4xx: CPU PPC440x5 on Virtex5 FX
7136 -This patchs gives support for the embbedded ppc440
7137 on the Virtex5 FPGAs
7138 -interrupts.c divided in uic.c and interrupts.c
7139 -xilinx_irq.c for xilinx interrupt controller
7140 -Include modifications propossed by Stefan Roese
7142 Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
7143 Acked-by: Stefan Roese <sr@denx.de>
7145 commit 340ccb260f21516be360745d5c5e3bd0657698df
7146 Author: Sebastian Siewior <bigeasy@linutronix.de>
7147 Date: Wed Jul 16 20:04:49 2008 +0200
7149 cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA
7151 This got broken by commits 93c56f212c
7152 [cfi_flash: support of long cmd in U-boot.]
7154 That command needs to be in little endian format on BE machines
7155 with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0
7156 gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into
7157 the cmdbuf in case portwidth = chipwidth = 8bit.
7159 Cc: Alexey Korolev <akorolev@infradead.org>
7160 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
7161 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
7163 commit 11188d55bc16dd907451c00282e00a038f73dd62
7164 Author: Stefan Roese <sr@denx.de>
7165 Date: Thu Jul 17 10:40:51 2008 +0200
7167 ppc4xx: Fix alphabetical order in 4xx Makefile part (redwood)
7169 Signed-off-by: Stefan Roese <sr@denx.de>
7171 commit 021f6df6e96af5b387810cf96d24848da1faa55c
7172 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7173 Date: Thu Jul 10 17:20:51 2008 +0400
7175 83xx: mpc8315erdb: fix silly thinko in fdt_tsec1_fixup
7177 The thinko was quite silly indeed, I messed with !ptr. Normally this
7178 would trigger some fault, but in U-Boot NULL pointer is equal to phys
7179 0, so the code was working still, just didn't actually test mpc8315erdb
7180 environment variable value. Heh.
7182 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7183 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7185 commit 25f5f0d49a3ae89bf4396f2557ce98debfef21da
7186 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7187 Date: Tue Jul 8 21:00:04 2008 +0400
7189 83xx: mpc8315erdb: add support for switching between ULPI/UTMI USB PHYs
7191 Freescale ships MPC8315E-RDB boards either with TSEC1 and USB UTMI
7192 support, or without TSEC1 but with USB ULPI PHY support in addition.
7193 With this patch user can specify desired USB PHY.
7195 Also, it seems that we can't distinguish the two boards in software, so
7196 user have to set `mpc8315erdb' environment variable to either 'tsec1'
7197 (TSEC1 enabled) or `ulpi' (board with ULPI PHY, TSEC1 disabled), so that
7198 Linux will not probe for TSEC1.
7200 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7201 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7203 commit 015b27b9e165fcf220e42f2c4afbaeaa2758fcf6
7204 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
7205 Date: Tue Jul 8 20:59:43 2008 +0400
7207 fdt_support: fdt_fixup_dr_usb: add support for phy_type fixups
7209 Currently U-Boot can only fixup the usb dr_mode, but some boards (namely
7210 MPC8315E-RDB) can use two PHY types: ULPI (stand-alone OTG port) or UTMI
7211 (connected to the four-ports hub, usb host only).
7213 This patch implements support for passing Dual-Role USB controller's
7214 device tree property phy_type through the usb_phy_type environment
7217 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
7218 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7219 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7221 commit 699f05125509249072a0b865c8d35520d97cd501
7222 Author: Wolfgang Denk <wd@denx.de>
7223 Date: Tue Jul 15 22:22:44 2008 +0200
7225 Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile
7227 Signed-off-by: Wolfgang Denk <wd@denx.de>
7229 commit bcab74baa6b1b1c969038ab6f64a186239180405
7230 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7231 Date: Tue Jul 15 11:23:02 2008 -0400
7233 Round the serial port clock divisor value returned by calc_divisor()
7235 Round the serial port clock divisor value returned by
7238 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7239 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
7241 commit 0328ef0edfe950f0b7b8b368dae482531506b74a
7242 Author: Robin Getz <rgetz@blackfin.uclinux.org>
7243 Date: Tue Jul 15 21:44:46 2008 +0200
7245 Fix DHCP protocol so U-Boot does not respond too early
7246 on the network with it's offered IP number; it should not reply until
7247 after it has received a DHCP ACK message. Also ensures that U-Boot
7248 does it's DHCPREQUEST as broadcast (per RFC 2131).
7250 Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
7251 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7252 Signed-off-by: Wolfgang Denk <wd@denx.de>
7254 commit 7288f972fcaee14a9741cb08c8688a23874b4a2e
7255 Author: Sebastian Siewior <bigeasy@linutronix.de>
7256 Date: Tue Jul 15 13:35:23 2008 +0200
7258 cfi_flash: make the command u32 only
7260 This got changed by commit 93c56f212c
7261 [cfi_flash: support of long cmd in U-boot.]
7263 Long is the wrong type because it will behave differently on 64bit
7264 machines in a way that is probably not expected. u32 should be
7267 Cc: Alexey Korolev <akorolev@infradead.org>
7268 Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
7269 Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
7271 commit 31cfe57491b183acae575d486729e158f016c27b
7272 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7273 Date: Mon Jul 14 23:48:41 2008 +0200
7275 tools/gitignore: update to all generated files
7277 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7279 commit 5e0de0e216b8fb27634afb11c60a2fa24c23349e
7280 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
7281 Date: Wed Jul 9 18:30:44 2008 +0200
7283 mpc5xxx: Add MVBC_P board support
7285 The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
7286 controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.
7288 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
7289 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
7291 commit e2d31fb3450653115452144363d5bde4e5e3e693
7292 Author: Timur Tabi <timur@freescale.com>
7293 Date: Thu Jun 19 17:56:11 2008 -0500
7295 Update Freescale sys_eeprom.c to handle CCID formats
7297 Update the sys_eeprom.c file to handle both NXID and CCID EEPROM formats. The
7298 NXID format replaces the older CCID format, but it's important to support both
7299 since most boards out there still use the CCID format. This change is in
7300 preparation for using one file to handle both formats. This will also unify
7301 EEPROM support for all Freescale 85xx and 86xx boards.
7303 Also update the 86xx board header files to use the standard CFG_I2C_EEPROM_ADDR
7304 instead of ID_EEPROM_ADDR.
7306 Signed-off-by: Timur Tabi <timur@freescale.com>
7308 commit d85f46a25ccb33ed9b295de3c2cfe1ce270ece9a
7309 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7310 Date: Fri Jul 11 17:22:43 2008 +0900
7312 pci: sh: Add pci_skip_dev and pci_print_dev function
7314 Add function of new PCI, pci_skip_dev and pci_print_dev.
7316 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
7317 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7319 commit 1107014e835ec9d46c0333f4211d104f77442db0
7320 Author: Andy Fleming <afleming@freescale.com>
7321 Date: Mon Jul 14 20:29:07 2008 -0500
7323 Clean up INIT_RAM options
7325 The L2_INIT_RAM option was unused, and recent changes to the TLB code
7326 meant that the INIT_RAM TLBs weren't being cleared out. In order to reduce
7327 the amount of mapped space attached to nothing, we change things so the TLBs
7330 Signed-off-by: Andy Fleming <afleming@freescale.com>
7332 commit 4524561820a9327e89107854b3a7187800ccf719
7333 Author: Andy Fleming <afleming@freescale.com>
7334 Date: Mon Jul 14 20:26:57 2008 -0500
7336 Remove fake flash bank from 8544 DS
7338 The fake flash bank was generating errors for anyone who didn't have a
7339 PromJET hooked up to the board. As that constitutes the vast majority of
7340 users, we remove it.
7342 Signed-off-by: Andy Fleming <afleming@freescale.com>
7344 commit 630d9bfcb5f6d3a43f251901a6b480994dcb6ea3
7345 Author: Kumar Gala <galak@kernel.crashing.org>
7346 Date: Mon Jul 14 14:07:03 2008 -0500
7348 MPC8544DS: Add ATI Video card support
7350 Add support for using a PCIe ATI Video card on PCIe2.
7352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7354 commit 7f9f4347cf325c63a39fe30910f3fb211ae2cc15
7355 Author: Kumar Gala <galak@kernel.crashing.org>
7356 Date: Mon Jul 14 14:07:02 2008 -0500
7358 85xx: Add some L1/L2 SPR register definitions
7360 Add new L1/L2 SPRs related to e500mc cache config and control.
7362 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7364 commit e5852787f0c3c442a276262f13d91ca450605ac0
7365 Author: Kumar Gala <galak@kernel.crashing.org>
7366 Date: Mon Jul 14 14:07:01 2008 -0500
7368 MPC8544DS: Report board id, board version and fpga version.
7370 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7372 commit 73f15a060f67a2462551c334215bd20fac6b81d1
7373 Author: Kumar Gala <galak@kernel.crashing.org>
7374 Date: Mon Jul 14 14:07:00 2008 -0500
7376 85xx: Cleanup L2 cache size detection
7378 The L2 size detection code was a bit confusing and we kept having to add
7379 code to it to handle new processors. Change the sense of detection so we
7380 look for the older processors that aren't changing.
7382 Also added support for 1M cache size on 8572.
7384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7386 commit c3ca7e5e00a24451f20df3bded9a61ba541921df
7387 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7388 Date: Fri Jul 11 15:33:08 2008 -0400
7390 sbc8560: enable CONFIG_OF_LIBFDT by default
7392 Make the default build for the sbc8560 board be powerpc
7393 capable with libfdt support.
7395 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7397 commit 6b44a44ec2aab180d7095c1c92e669cee1d3e3bd
7398 Author: Andy Fleming <afleming@freescale.com>
7399 Date: Mon Jul 14 20:04:40 2008 -0500
7401 Fix indentation for default boot environment variables
7403 This was proposed by Paul Gortmaker in response to Wolfgang's comments on
7404 similar #defines in sbc8560.h.
7406 Signed-off-by: Andy Fleming <afleming@freescale.com>
7408 commit 37fef499104e28e0a83b02b85ca0d1fbe80d294a
7409 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7410 Date: Fri Jul 11 15:33:07 2008 -0400
7412 sbc8560: add default fdt values
7414 Add in the default fdt settings and the typical EXTRA_ENV
7415 settings as borrowed from the mpc8560ads. Fix a couple
7416 of stale references to the mpc8560ads dating back to the
7417 original clone/fork.
7419 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7420 Signed-off-by: Andy Fleming <afleming@freescale.com>
7422 commit d04e76edf92f7f89696989e8702b97e020455af3
7423 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7424 Date: Fri Jul 11 15:33:06 2008 -0400
7426 sbc8560: add in ft_board_setup()
7428 Add in for the sbc8560, the ft_board_setup() routine, based on what is
7429 in use for the Freescale MPC8560ADS board.
7431 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7433 commit c158bcaca3b31cbe38c4143812e6170e38a57393
7434 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7435 Date: Fri Jul 11 15:33:05 2008 -0400
7437 sbc8560: define eth0 and eth1 instead of eth1 and eth2
7439 The existing config doesn't define CONFIG_HAS_ETH0, and so the
7440 fdt support doesn't update the zeros in the dtb local-mac with
7441 real data from the u-boot env. Since the existing config is
7442 tailored to just two interfaces, get rid of the ETH2 definitions
7445 Also don't include any end user specific data into the environment
7446 by default -- things like MAC address, network parameters etc. need
7447 to come from the end user.
7449 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7450 Signed-off-by: Andy Fleming <afleming@freescale.com>
7452 commit 0ec436d2f95076d9e46ae594db6e9b1d8732840d
7453 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7454 Date: Fri Jul 11 15:33:04 2008 -0400
7456 sbc8560: properly set cs0_bnds for 512MB
7458 The sbc8560 board ships with 512MB of memory installed,
7459 but the current cs0_bnds is hard coded for 256MB. Set the
7460 value based on CFG_SDRAM_SIZE.
7462 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7464 commit 6de5bf24004c8d9c9b070bb8f7418d1c45e5eb27
7465 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7466 Date: Fri Jul 11 15:33:03 2008 -0400
7468 sbc8560: proper definitions for TSEC.
7470 The definitions for the TSEC have become out of date. There is no
7471 longer any such options like "CONFIG_MPC85xx_TSEC1" or similar.
7472 Update to match those of other boards, like the MPC8560ADS.
7474 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7475 Acked-by: Ben Warren <biggerbadderben@gmail.com>
7477 commit 71074abbe0c76429577aff58aeff0a24ad210b23
7478 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
7479 Date: Wed Jul 9 13:23:05 2008 -0400
7481 8xxx-fdt: set ns16550 clock from CFG_NS16550_CLK, not bi_busfreq
7483 Some boards that have external 16550 UARTs don't have a direct
7484 tie between bi_busfreq and the clock used for the UARTs. Boards
7485 that do have such a tie should set CFG_NS16550_CLK to be
7486 get_bus_freq(0) -- which most of them do already.
7488 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
7489 Acked-by: Kim Phillips <kim.phillips@freescale.com>
7491 commit 24ef76f320fbadf074105229826514db140f939f
7492 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
7493 Date: Wed Jul 2 07:03:53 2008 -0700
7495 Change the temp map to ROM to align addresses to page size.
7497 With a page size of BOOKE_PAGESZ_16M, both the real and effective
7498 addresses must be multiples of 16MB. The hardware silently truncates
7499 them so the code happens to work. This patch clarifies the situation
7500 by establishing addresses that the hardware doesn't need to truncate.
7502 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
7503 Signed-off-by: Andy Fleming <afleming@freescale.com>
7505 commit 06b4186c10204b6683edb047ac5f506fb0ce0937
7506 Author: Kim Phillips <kim.phillips@freescale.com>
7507 Date: Tue Jun 17 17:45:22 2008 -0500
7509 mpc85xx: use IS_E_PROCESSOR macro
7511 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7513 commit 6b70ffb9d1b2e791161f3cf92937aa45b4a07b78
7514 Author: Kim Phillips <kim.phillips@freescale.com>
7515 Date: Mon Jun 16 15:55:53 2008 -0500
7517 fdt: add crypto node handling for MPC8{3, 5}xxE processors
7519 Delete the crypto node if not on an E-processor. If on 8360 or 834x family,
7520 check rev and up-rev crypto node (to SEC rev. 2.4 property values)
7521 if on an 'EA' processor, e.g. MPC8349EA.
7523 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
7525 commit 85e5808e8ea9f77da5219f23394112f0b424fa5e
7526 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7527 Date: Fri Jul 11 15:10:11 2008 -0400
7529 ARM DaVinci: Remove extern phy_t declaration by moving code to proper place
7531 ARM DaVinci: Remove extern phy_t declaration by moving
7532 code to proper place.
7534 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7536 commit 3a9e7ba2ac14018c5dd1e78a7dd735571569c971
7537 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7538 Date: Fri Jul 11 15:10:10 2008 -0400
7540 ARM DaVinci: Remove duplicate definitions of MACH_TYPE and prototype of i2c_init()
7542 ARM DaVinci: Remove duplicate definitions of MACH_TYPE
7543 and prototype of i2c_init().
7545 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7547 commit 348753d416cd2c9e7ec6520a544c8f33cf02a560
7548 Author: Kumar Gala <galak@kernel.crashing.org>
7549 Date: Mon Jul 14 14:03:02 2008 -0500
7551 Fix some more printf() format problems.
7553 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
7555 commit 45b16d22c64674ccd8c4637456a987463609141c
7556 Author: Wolfgang Denk <wd@denx.de>
7557 Date: Mon Jul 14 22:38:42 2008 +0200
7559 Fix coding style; make code better parsable by external tools
7561 Signed-off-by: Wolfgang Denk <wd@denx.de>
7563 commit b880cbf207b1c109d3a661417a8feddcbd729a9d
7564 Author: Wolfgang Denk <wd@denx.de>
7565 Date: Mon Jul 14 21:19:08 2008 +0200
7567 cpu/i386/serial.c: Fix syntax errors
7569 Signed-off-by: Wolfgang Denk <wd@denx.de>
7571 commit e2d45e6f4d9919e1afeac5e09557b2252832fccf
7572 Author: Wolfgang Denk <wd@denx.de>
7573 Date: Mon Jul 14 20:41:35 2008 +0200
7575 elppc board: Coding style cleanup.
7577 Signed-off-by: Wolfgang Denk <wd@denx.de>
7579 commit 82b24a8a505fc81466484b3c55b574ee0b4205bc
7580 Author: Wolfgang Denk <wd@denx.de>
7581 Date: Mon Jul 14 20:40:22 2008 +0200
7583 elppc board: fix syntax error.
7585 Signed-off-by: Wolfgang Denk <wd@denx.de>
7587 commit 0fe340585a6a48bd392d315b0dd84d068b1c3790
7588 Author: Wolfgang Denk <wd@denx.de>
7589 Date: Mon Jul 14 20:38:26 2008 +0200
7591 EB+MCF-EV123 board: fix coding style (alingment)
7593 Signed-off-by: Wolfgang Denk <wd@denx.de>
7595 commit 6841785a0bb0f38175456a923edd634fb7dd6947
7596 Author: Wolfgang Denk <wd@denx.de>
7597 Date: Mon Jul 14 20:36:44 2008 +0200
7599 EB+MCF-EV123 board: fix syntx error
7601 Signed-off-by: Wolfgang Denk <wd@denx.de>
7603 commit ab5cda9f88c3eaf9cf599adc3a3375906c4ed904
7604 Author: Andy Fleming <afleming@freescale.com>
7605 Date: Mon Jul 7 18:02:08 2008 -0500
7607 Remove LBC_CACHE_BASE from 8544 DS
7609 The 8544 DS doesn't have any cacheable Local Bus memories set up. By mapping
7610 space for some anyway, we were allowing speculative loads into unmapped space,
7611 which would cause an exception (annoying, even if ultimately harmless).
7612 Removing LBC_CACHE_BASE, and using LBC_NONCACHE_BASE for the LBC LAW solves the
7615 Signed-off-by: Andy Fleming <afleming@freescale.com>
7617 commit d0ff51ba5d0309dbe9e25ea54f8a0285a6d5db90
7618 Author: Wolfgang Denk <wd@denx.de>
7619 Date: Mon Jul 14 15:19:07 2008 +0200
7621 Code cleanup: fix old style assignment ambiguities like "=-" etc.
7623 Signed-off-by: Wolfgang Denk <wd@denx.de>
7625 commit d7854223c5c85b5849fbf422cc8ac0efef461c37
7626 Author: Wolfgang Denk <wd@denx.de>
7627 Date: Mon Jul 14 15:10:53 2008 +0200
7629 AmigaOneG3SE: remove dead and incomplete files
7631 Signed-off-by: Wolfgang Denk <wd@denx.de>
7633 commit b64f190b7a34224df09b559ca111eb1b733f00ad
7634 Author: Wolfgang Denk <wd@denx.de>
7635 Date: Mon Jul 14 15:06:35 2008 +0200
7637 Fix printf() format issues with sizeof_t types by using %zu
7639 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7640 Signed-off-by: Wolfgang Denk <wd@denx.de>
7642 commit f354b73e16a86f9e9085471a830605f74f84ea5d
7643 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7644 Date: Mon Jul 14 14:11:45 2008 +0200
7646 vsprintf: add z and t options
7648 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7650 commit 25dbe98abb686d8210e1731fba85ced7d3ce874c
7651 Author: Wolfgang Denk <wd@denx.de>
7652 Date: Sun Jul 13 23:07:35 2008 +0200
7654 Fix some more printf() format issues.
7656 Signed-off-by: Wolfgang Denk <wd@denx.de>
7658 commit d5996dd555edf52721b7691a4c59de016251ed39
7659 Author: Wolfgang Denk <wd@denx.de>
7660 Date: Sun Jul 13 19:51:00 2008 +0200
7662 Fix some more printf() format problems.
7664 Signed-off-by: Wolfgang Denk <wd@denx.de>
7666 commit 0f9d5f6d6e814907794995c6a22af752040c35d9
7667 Author: Wolfgang Denk <wd@denx.de>
7668 Date: Sun Jul 13 19:48:26 2008 +0200
7670 ADS5121: Fix (delete) incorrect ads5121_diu_init() prototype
7672 Signed-off-by: Wolfgang Denk <wd@denx.de>
7674 commit 322716a1d1eb33a71067ba0eb1c5346fb2dd6b34
7675 Author: Anatolij Gustschin <agust@denx.de>
7676 Date: Sat Jul 12 17:31:36 2008 +0200
7678 Fix bug in Lime video driver
7680 We need to wait while drawing engine clears frame
7681 buffer before any further software accesses to frame
7682 buffer will be initiated. Otherwise software drawn
7683 parts could be partially destroyed by the drawing
7684 engine or even GDC chip freeze could occur (as
7685 observed on socrates board).
7687 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7689 commit 0a5676befb0c590212a53f7627fa5d0d8a84bf34
7690 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7691 Date: Sat Jul 12 14:36:34 2008 +0200
7693 Fix some more printf() format issues.
7695 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
7697 commit 18c8a28aad49803780bd8d52432ded528e37e701
7698 Author: Michal Simek <monstr@monstr.eu>
7699 Date: Fri Jul 11 15:11:57 2008 +0200
7701 hwmon: rename CONFIG_DS1722 to CONFIG_DTT_DS1722
7703 Signed-off-by: Michal Simek <monstr@monstr.eu>
7704 Acked-by: Stefan Roese <sr@denx.de>
7706 commit 6ecbb45bb027e90c19d63b48e7b0c05acc1a87c0
7707 Author: Michal Simek <monstr@monstr.eu>
7708 Date: Fri Jul 11 11:50:53 2008 +0200
7710 hwmon: Cleaning hwmon devices
7713 Move device specific values to driver for better reading
7715 Signed-off-by: Michal Simek <monstr@monstr.eu>
7716 Acked-by: Stefan Roese <sr@denx.de>
7718 commit c78fce699c7ff467ecd841da6a79f065180bf578
7719 Author: Michal Simek <monstr@monstr.eu>
7720 Date: Fri Jul 11 10:43:13 2008 +0200
7722 FIS: repare incorrect return value with ramdisk handling
7724 Microblaze and PowerPC use boot_get_ramdisk for loading
7725 ramdisk to memory with checking return value.
7726 Return 0 means success. Return 1 means failed.
7727 Here is correspond part of code from bootm.c which check
7730 ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_PPC,
7731 &rd_data_start, &rd_data_end);
7735 Signed-off-by: Michal Simek <monstr@monstr.eu>
7737 commit 84a2c64a26dc5e275e1cf4e76a6e194a18fb5477
7738 Author: Michal Simek <monstr@monstr.eu>
7739 Date: Fri Jul 11 10:10:32 2008 +0200
7741 microblaze: Remove useless ancient headers
7743 Signed-off-by: Michal Simek <monstr@monstr.eu>
7745 commit 53ea981c3124b13c137c2d10e975b7c6672266e0
7746 Author: Michal Simek <monstr@monstr.eu>
7747 Date: Fri Jul 11 10:10:31 2008 +0200
7749 microblaze: Clean uartlite driver
7751 Redesign uartlite driver to in_be32 and out_be32 macros
7752 Fix missing header in io.h
7754 Signed-off-by: Michal Simek <monstr@monstr.eu>
7755 Acked-by: Grant Likely <grant.likely@secretlab.ca>
7757 commit dbf3dfb386a2d5d2381814e39985ab2e21894550
7758 Author: Marcel Ziswiler <marcel@ziswiler.com>
7759 Date: Fri Jul 11 02:39:14 2008 +0200
7761 Enable passing of ATAGs required by latest Linux kernel.
7763 commit ef130d3093bdf88f01cf3e000fe5df249ebf2b1a
7764 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7765 Date: Fri Jul 11 10:24:15 2008 -0400
7767 Fix integer overflow warning in calc_divisor()
7769 which happened when rounding the serial port clock divisor
7771 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7773 commit 6b760189d77f001684e3160b355c185ca3804961
7774 Author: Marcel Ziswiler <marcel@ziswiler.com>
7775 Date: Fri Jul 11 01:09:59 2008 +0200
7777 Fix build time warnings in function mmc_decode_csd()
7779 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
7781 commit c15947d6ce0d59925c97fdfac692476af6e262d0
7782 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7783 Date: Thu Jul 10 10:46:33 2008 -0400
7785 ARM: Fix for broken compilation when defining CONFIG_CMD_ELF
7787 caused by missing dcache status/enable/disable functions.
7789 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
7791 commit 068c1b77c8f42a1a31084d2f4b1d5cc807c1a9ce
7792 Author: Stefan Roese <sr@denx.de>
7793 Date: Thu Jul 10 13:53:31 2008 +0200
7795 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
7797 This patch removes some ft_board_setup() functions from some 4xx boards.
7798 This can be done since we now have a default weak implementation for this
7799 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
7800 implementation like canyonlands need their own version.
7802 Signed-off-by: Stefan Roese <sr@denx.de>
7804 commit d39a089f8bc960ba9ae6a08fda5582b578620cc1
7805 Author: Wolfgang Denk <wd@denx.de>
7806 Date: Sun Jul 13 14:58:16 2008 +0200
7808 Add last known maintainer for orphaned boards; reformat.
7810 Signed-off-by: Wolfgang Denk <wd@denx.de>
7812 commit 5c761d57bb9940e016d561fda8b2ed84c55de5b6
7813 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7814 Date: Thu Jul 10 13:16:04 2008 +0200
7816 Remove kharris@nexus-tech.net from MAINTAINERS
7818 Mail to kharris@nexus-tech.net bounces because the user doesn't exist
7819 anymore. You can't be a maintainer without a valid e-mail address, so
7820 move all boards that used to be maintained by Kyle Harris to the
7823 Currently, only PowerPC has a list of orphaned boards, so this patch
7824 creates one for ARM as well.
7826 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
7828 commit 17bd17071463b0cde391ac4a0863d600474b4ea1
7829 Author: Anatolij Gustschin <agust@denx.de>
7830 Date: Thu Jul 10 01:15:10 2008 +0200
7832 at91: Fix to enable using Teridian MII phy (78Q21x3) with at91sam9260
7834 On the at91sam9260ep development board there is an EEPROM
7835 connected to the TWI interface (PA23, PA24 Peripheral A
7836 multiplexing), so we cannot use these pins as ETX2, ETX3.
7837 This patch configures PA10, PA11 pins for ETX2, ETX3
7838 instead of PA23, PA24 pins.
7840 Signed-off-by: Anatolij Gustschin <agust@denx.de>
7841 Signed-off-by: Manuel Sahm <Manuel.Sahm@feig.de>
7843 commit f889265753ddf4465d9d580827bb9289bfac55d6
7844 Author: Kenneth Johansson <kenneth@southpole.se>
7845 Date: Sat Jul 12 13:18:34 2008 -0600
7847 fix DIU for small screens
7849 The DIU_DIV register is 8 bit not 5 bit. This prevented large DIV values
7850 so it was not possible to set a slow pixel clock and thus prevented
7851 display on small screens.
7853 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
7854 Acked-by: John Rigby <jrigby@freescale.com>
7856 commit b60b8573875e650e4c69be667bfc88d3ed474a7c
7857 Author: John Rigby <jrigby@freescale.com>
7858 Date: Fri Jul 11 14:44:09 2008 -0600
7860 ADS5121 cleanup compile warnings
7862 board/ads5121/iopin.c
7863 Replace bit fields in struct iopin_t with a single
7864 field and intialize it via plain old macros.
7865 This fixes the type pun warnings and makes the code
7868 board/ads5121/ads5121.c
7869 Add include iopin.h to ads5121.c for the iopin_initialize
7872 Add an extern void ads5121_diu_init(void)
7874 Signed-off-by: John Rigby <jrigby@freescale.com>
7876 commit bde63587622c4b830a27d1ddf7265843de9e994f
7877 Author: Wolfgang Denk <wd@denx.de>
7878 Date: Fri Jul 11 22:56:11 2008 +0200
7880 Fix some more printf() format issues.
7882 Signed-off-by: Wolfgang Denk <wd@denx.de>
7884 commit 184f1b404a90eef8b425c0e7b3018d59ef9982c8
7885 Author: Wolfgang Denk <wd@denx.de>
7886 Date: Fri Jul 11 22:55:31 2008 +0200
7888 Fixed some out-of-tree build issues
7890 Signed-off-by: Wolfgang Denk <wd@denx.de>
7892 commit 47bf9c71ae838305a3ea3161af8d14e6f3fc2c82
7893 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7894 Date: Wed Jul 9 16:20:23 2008 -0500
7896 ColdFire: Fix FB CS not setup properly for Mcf5282
7898 Remove all CFG_CSn_RO in cpu/mcf52x2/cpu_init.c. If
7899 CFG_CSn_RO is defined as 0, the chipselect will not
7902 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7904 commit bc3ccb139f0836f0a834cfd370a120a00ad7e63a
7905 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7906 Date: Wed Jul 9 15:47:27 2008 -0500
7908 ColdFire: Fix incorrect define for mcf5227x and mcf5445x RTC
7910 Rename CONFIG_MCFTMR to CONFIG_MCFRTC to include real time
7911 clock module in cpu/<cf arch>/cpu_init.c
7913 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7915 commit f94945b517f10e01927101679c62361e03d4e837
7916 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7917 Date: Wed Jul 9 15:25:01 2008 -0500
7919 ColdFire: Fix incorrect board name in MAKEALL for M5253EVBE
7921 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7923 commit 0e0c4357d14a3563c6a2a1e6d5ad6a2cc4f35cab
7924 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7925 Date: Wed Jul 9 15:21:44 2008 -0500
7927 Fix compile error caused by missing timer function
7929 Add #define CONFIG_MCFTMR in EB+MCF-EV123.h configuration file
7931 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7933 commit c37ea031175b807c54e6bad9b270e9bede6c0078
7934 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7935 Date: Wed Jul 9 15:14:25 2008 -0500
7937 Fix compile error caused by incorrect function return type
7939 Rename int mii_init(void) to void mii_init(void)
7941 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7943 commit ab4860b255239dbaecccdd002c8d11f4ef54dd75
7944 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7945 Date: Wed Jun 18 19:27:23 2008 -0500
7947 ColdFire: Fix power up issue for MCF5235
7949 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7951 commit dd08e97361fbc9e79fa5ef1a8acf29273b934b11
7952 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7953 Date: Wed Jun 18 19:19:07 2008 -0500
7955 ColdFire: Fix compiling error for MCF5275
7957 The compiling error was caused by missing a closed parentheses
7960 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7962 commit 94603c2fd4dbe0655878416aa0da9f302d4c30d3
7963 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7964 Date: Wed Jun 18 19:14:01 2008 -0500
7966 ColdFire: Fix timer issue for MCF5272
7968 The timer was assigned to wrong timer memory mapped which
7969 caused udelay() and timer() not working properly.
7971 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7973 commit 3b1e8ac9b43f89cc9291a6a86e6b33ef55801515
7974 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7975 Date: Wed Jun 18 19:12:13 2008 -0500
7977 ColdFire: Change invalid JMP to BRA caught by new v4e toolchain
7979 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
7981 commit 8371dc2066136be21e10b7b9293e469297d77298
7982 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7983 Date: Wed Jun 18 19:05:23 2008 -0500
7985 ColdFire: Add -got=single param for new linux v4e toolchains
7987 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
7989 commit 56d52615cd47bc522ee13bb7ec7e59d6ce9426c7
7990 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7991 Date: Wed Jun 18 13:21:19 2008 -0500
7993 ColdFire: Fix code flash configuration for M547x/M548x boards
7995 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
7997 commit 6e37091afc07fdcc15590093fd066b0cb7399f85
7998 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
7999 Date: Tue Jun 24 12:12:16 2008 -0500
8001 ColdFire: Fix warning messages by passing correct data type in board.c
8003 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8005 commit 81cc32322acb1b3225ee45606ced48e2a14824dc
8006 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8007 Date: Thu May 29 12:21:54 2008 -0500
8009 ColdFire: Fix UART baudrate formula
8011 The formula "counter = (u32) (gd->bus_clk / gd->baudrate) / 32"
8012 can generate the wrong divisor due to integer division truncation.
8013 Round the calculated divisor value by adding 1/2 the baudrate
8014 before dividing by the baudrate.
8016 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
8017 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
8019 commit b578fb471444cbd7db1285701ba51343baaf73fb
8020 Author: Stefan Roese <sr@denx.de>
8021 Date: Thu Jul 10 11:38:26 2008 +0200
8023 ppc4xx: Fix include sequence in 4xx_pcie.c
8025 This patch now moves common.h to the top of the inlcude list. This
8026 is needed for boards with CONFIG_PHYS_64BIT set (e.g. katmai), so that
8027 the phys_size_t/phys_addr_t are defined to the correct size in this
8030 Signed-off-by: Stefan Roese <sr@denx.de>
8032 commit 69e2c6d0d13d7c8cf1612ac090bdc4c59ba6858e
8033 Author: Stefan Roese <sr@denx.de>
8034 Date: Fri Jul 11 13:10:56 2008 +0200
8036 ppc4xx: Fix compile warning in 44x_spd_ddr2.c
8038 Signed-off-by: Stefan Roese <sr@denx.de>
8040 commit 6bd9138498c2e4f4f09190108b99157d1b2140b5
8041 Author: Stefan Roese <sr@denx.de>
8042 Date: Fri Jul 11 11:40:13 2008 +0200
8044 ppc4xx: Fix small korat merge problem
8046 Signed-off-by: Stefan Roese <sr@denx.de>
8048 commit 1d0554736a0a1dd59718acda660871ce56b69e18
8049 Author: Stefan Roese <sr@denx.de>
8050 Date: Fri Jul 11 11:34:52 2008 +0200
8052 ppc4xx: Some Rewood cleanups (coding style, leading white spaces)
8054 Signed-off-by: Stefan Roese <sr@denx.de>
8056 commit 3a82113ed5934d498f25080441a8261fc9454b15
8057 Author: Stefan Roese <sr@denx.de>
8058 Date: Thu Jul 10 16:37:09 2008 +0200
8060 ppc4xx: Add 460SX UIC defines
8062 Only the really needed ones are added (cascading and EMAC/MAL).
8064 Signed-off-by: Stefan Roese <sr@denx.de>
8066 commit 26173fc6f60521c2a8072f652f863617fc11ba9a
8067 Author: Stefan Roese <sr@denx.de>
8068 Date: Mon Jun 30 14:11:07 2008 +0200
8070 ppc4xx: Continue cleanup of ppc440.h
8072 This patch continues the ppc440.h cleanup by removing some of the unused
8075 Signed-off-by: Stefan Roese <sr@denx.de>
8077 commit d9056b7913ed6a228d2f33671d916efedee541dd
8078 Author: Stefan Roese <sr@denx.de>
8079 Date: Mon Jun 30 14:05:05 2008 +0200
8081 ppc4xx: Cleanup Katmai & Yucca PCIe register usage
8083 This patch cleans up the 440SPe PCIe register usage. Now only defines
8084 from the include/asm-ppc/4xx_pcie.h are used.
8086 Signed-off-by: Stefan Roese <sr@denx.de>
8088 commit 5de851403b01489b493fa83137ad990b8ce60d1c
8089 Author: Stefan Roese <sr@denx.de>
8090 Date: Thu Jun 26 17:36:39 2008 +0200
8092 ppc4xx: Rework 440GX UIC handling
8094 This patch reworks the 440GX interrupt handling so that the common 4xx
8095 code can be used. The 440GX is an exception to all other 4xx variants
8096 by having the cascading interrupt vectors not on UIC0 but on a special
8097 UIC named UICB0 (UIC Base 0). With this patch now, U-Boot references
8098 the 440GX UICB0 when UIC0 is selected. And the common 4xx interrupt
8099 handling is simpler without any 440GX special cases.
8101 Also some additional cleanup to cpu/ppc4xx/interrupt.c is done.
8103 Signed-off-by: Stefan Roese <sr@denx.de>
8105 commit d1631fe1a05b063ccaf62ea892a8887b829847d1
8106 Author: Stefan Roese <sr@denx.de>
8107 Date: Thu Jun 26 13:40:57 2008 +0200
8109 ppc4xx: Consolidate PPC4xx UIC defines
8111 This 2nd patch now removes all UIC mask bit definition. They should be
8112 generated from the vectors by using the UIC_MASK() macro from now on.
8113 This way only the vectors need to get defined for new PPC's.
8115 Also only the really used interrupt vectors are now defined. This makes
8116 definitions for new PPC versions easier and less error prone.
8118 Another part of this patch is that the 4xx emac driver got a little
8119 cleanup, since now the usage of the interrupts is clearer.
8121 Signed-off-by: Stefan Roese <sr@denx.de>
8123 commit 4fb25a3db3b3839094aa9ab748efd7a95924690b
8124 Author: Stefan Roese <sr@denx.de>
8125 Date: Wed Jun 25 10:59:22 2008 +0200
8127 ppc4xx: Consolidate PPC4xx UIC defines
8129 This patch is the first step to consolidate the UIC related defines in the
8130 4xx headers. Move header from asm-ppc/ppc4xx-intvec.h to
8131 asm-ppc/ppc4xx-uic.h as it will hold all UIC related defines in the next
8134 Signed-off-by: Stefan Roese <sr@denx.de>
8136 commit 7ee2619c20ccecd57966d74d844e6329e141261c
8137 Author: Stefan Roese <sr@denx.de>
8138 Date: Tue Jun 24 17:18:50 2008 +0200
8140 ppc4xx: Consolidate PPC4xx EBC defines
8142 This patch removes all EBC related defines from the PPC4xx headers
8143 ppc405.h and ppc440.h and introduces a new header
8145 include/asm-ppc/ppc4xx-ebc.h
8147 with all those defines.
8149 Signed-off-by: Stefan Roese <sr@denx.de>
8151 commit e321801bed5a6d896d298c00fd20046f039d5d66
8152 Author: Stefan Roese <sr@denx.de>
8153 Date: Thu Jul 10 13:52:44 2008 +0200
8155 ppc4xx: Remove redundant ft_board_setup() functions from some 4xx boards
8157 This patch removes some ft_board_setup() functions from some 4xx boards.
8158 This can be done since we now have a default weak implementation for this
8159 in cpu/ppc4xx/fdt.c. Only board in need for a different/custom
8160 implementation like canyonlands need their own version.
8162 Signed-off-by: Stefan Roese <sr@denx.de>
8164 commit 08250eb2edbd96514d049602d9e134110ac3185f
8165 Author: Stefan Roese <sr@denx.de>
8166 Date: Thu Jul 10 15:32:32 2008 +0200
8168 ppc4xx: Fix merge problems in 44x_spd_ddr2.c
8170 Signed-off-by: Stefan Roese <sr@denx.de>
8172 commit 1740c1bf40e3c6d03ac16c29943fdd9fc1e87038
8173 Author: Grant Erickson <gerickson@nuovations.com>
8174 Date: Tue Jul 8 08:35:00 2008 -0700
8176 ppc4xx: Add MII mode support to the EMAC RGMII Bridge
8178 This patch adds support for placing the RGMII bridge on the
8179 PPC405EX(r) into MII/GMII mode and allows a board-specific
8180 configuration to specify the bridge mode at compile-time.
8182 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8183 Signed-off-by: Stefan Roese <sr@denx.de>
8185 commit 2e2050842e731c823ce8d41fb0c15579eb70ced9
8186 Author: Grant Erickson <gerickson@nuovations.com>
8187 Date: Wed Jul 9 16:46:35 2008 -0700
8189 ppc4xx: Add Mnemonics for AMCC/IBM DDR2 SDRAM Controller
8191 This patch completes the preprocessor mneomics for the IBM DDR2 SDRAM
8192 controller registers (MODT and INITPLR) used by the
8193 PowerPC405EX(r). The MMODE and MEMODE registers are unified with their
8194 peer values used for the INITPLR MR and EMR registers,
8195 respectively. Finally, a spelling typo is correct (MANUEL to MANUAL).
8197 With these mnemonics in place, the CFG_SDRAM0_* magic numbers for
8198 Kilauea are replaced by equivalent mnemonics to make it easier to
8199 compare and contrast other 405EX(r)-based boards (e.g. during board
8202 Finally, unified the SDRAM controller register dump routine such that
8203 it can be used across all processor variants that utilize the IBM DDR2
8204 SDRAM controller core. It produces output of the form:
8206 PPC4xx IBM DDR2 Register Dump:
8208 SDRAM_MB0CF[40] = 0x00006701
8211 which is '<mnemonic>[<DCR #>] = <value>'. The DCR number is included
8212 since it is not uncommon that the DCR values in header files get mixed
8213 up and it helps to validate, at a glance, they match what is printed
8217 AMCC Kilauea/Haleakala:
8218 - NFS Linux Boot: PASSED
8219 - NAND Linux Boot: PASSED
8221 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8222 Signed-off-by: Stefan Roese <sr@denx.de>
8224 commit ad7382d828982e9c1bafc4313ef1b666f6145f58
8225 Author: Grant Erickson <gerickson@nuovations.com>
8226 Date: Wed Jul 9 16:31:59 2008 -0700
8228 ppc4xx: Add AMCC/IBM DDR2 SDRAM ECC Field Mnemonics
8230 Add additional DDR2 SDRAM memory controller DCR mneomnics, condition
8231 revision ID DCR based on 405EX, and add field mnemonics for bus error
8232 status and ECC error status registers.
8234 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8235 Signed-off-by: Stefan Roese <sr@denx.de>
8237 commit 103201731bd8e85404d0f51a5b4e8abd14c0b6c6
8238 Author: Grant Erickson <gerickson@nuovations.com>
8239 Date: Wed Jul 9 16:31:36 2008 -0700
8241 ppc4xx: Add SDR0_SRST Mnemonics for the 405EX(r)
8243 This patch adds bit field mnemonics for the 405EX(r) SDR0_SRST soft reset register.
8245 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8246 Signed-off-by: Stefan Roese <sr@denx.de>
8248 commit 5b457d00730d4aa0c6450d21a9104723e606fb98
8249 Author: Grant Erickson <gerickson@nuovations.com>
8250 Date: Wed Jul 9 11:55:46 2008 -0700
8252 PPC4xx: Correct SDRAM_MCSTAT for PPC405EX(r)
8254 While the PowerPC 405EX(r) shares in common the AMCC/IBM DDR2 SDRAM
8255 controller core also used in the 440SP, 440SPe, 460EX, and 460GT, in
8256 the 405EX(r), SDRAM_MCSTAT has a different DCR value.
8258 Its present value on the 405EX(r) causes a read back of 0xFFFFFFFF
8259 which causes SDRAM initialization to periodically fail since it can
8260 prematurely indicate SDRAM ready status.
8262 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
8263 Signed-off-by: Stefan Roese <sr@denx.de>
8265 commit 0ce5c8675bb2c61f1d71fb97f0bbe822663fb93d
8266 Author: Feng Kan <fkan@amcc.com>
8267 Date: Tue Jul 8 22:48:42 2008 -0700
8269 ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.
8271 Add AMCC Redwood reference board that uses the latest
8272 PPC 464 CPU processor combined with a rich mix of peripheral
8273 controllers. The board will support PCIe, mutiple Gig ethernet
8274 ports, advanced hardware RAID assistance and IEEE 1588.
8276 Signed-off-by: Feng Kan <fkan@amcc.com>
8277 Signed-off-by: Stefan Roese <sr@denx.de>
8279 commit 96e5fc0e6a1861d0fea4efa3cd376df95a5b1b89
8280 Author: Feng Kan <fkan@amcc.com>
8281 Date: Tue Jul 8 22:48:07 2008 -0700
8283 ppc4xx: Add initial 460SX reference board (redwood) config file and defines.
8285 Signed-off-by: Feng Kan <fkan@amcc.com>
8286 Signed-off-by: Stefan Roese <sr@denx.de>
8288 commit 7d30793685efcada183891c78fc892e6c9ba50c7
8289 Author: Feng Kan <fkan@amcc.com>
8290 Date: Tue Jul 8 22:47:31 2008 -0700
8292 ppc4xx: Add initial 460SX defines for the cpu/ppc4xx directory.
8294 Signed-off-by: Feng Kan <fkan@amcc.com>
8295 Signed-off-by: Stefan Roese <sr@denx.de>
8297 commit 9b55a2536919f4de1bb1044e6eb8262c2f53bc96
8298 Author: Wolfgang Denk <wd@denx.de>
8299 Date: Fri Jul 11 01:16:00 2008 +0200
8301 Fix some more print() format errors.
8303 Signed-off-by: Wolfgang Denk <wd@denx.de>
8305 commit fdd70d1921b87287d9a99d1be99bc35226c2b412
8306 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8307 Date: Thu Jul 10 20:57:54 2008 +0200
8309 MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to arm
8311 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8313 commit c6457e3b8bc79a97381cf7deffa08f7c5a24f86c
8314 Author: Sergey Lapin <slapin@ossfans.org>
8315 Date: Thu Jun 5 11:06:29 2008 +0400
8317 DataFlash AT45DB021 support
8319 Some boards based on AT91SAM926X-EK use smaller DF chips to keep
8320 bootstrap, u-boot and its environment, using NAND or other external
8321 storage for kernel and rootfs. This patch adds support for
8322 small 1024x263 chip.
8324 Signed-off-by: Sergey Lapin <slapin@ossfans.org>
8326 commit 4109df6f75fc00ab7da56d286ba50149a0d16a69
8327 Author: Kim Phillips <kim.phillips@freescale.com>
8328 Date: Thu Jul 10 14:00:15 2008 -0500
8330 silence misc printf formatting compiler warnings
8332 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
8334 commit 3d71c81a9bb03f866a1e98da96363ef3f46c76b3
8335 Author: Markus Klotzbücher <mk@denx.de>
8336 Date: Thu Jul 10 14:47:09 2008 +0200
8338 USB: shutdown USB before booting
8340 This patch fixes a potentially serious issue related to USB which was
8341 discouvered by Martin Krause <martin.krause@tqs.de> and fixed for
8342 ARM920T. Martin wrote:
8344 Turn off USB to prevent the host controller from writing to the
8345 SDRAM while Linux is booting. This could happen, because the HCCA
8346 (Host Controller Communication Area) lies within the SDRAM and the
8347 host controller writes continously to this area (as busmaster!), for
8348 example to increase the HccaFrameNumber variable, which happens
8351 This is a slightly modified version of the patch in order to shutdown
8352 USB when booting on all architectures.
8354 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
8356 commit f31c49db2a5e076f415c0785eb37f67f2faa5fc8
8357 Author: Martha Marx <mmarx@silicontkx.com>
8358 Date: Thu May 29 14:23:25 2008 -0400
8360 Configuration changes for ADS5121 Rev 3
8362 ADS5121 Rev 3 board is now the default config
8364 config targets are now
8377 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
8378 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8379 Acked-by: John Rigby <jrigby@freescale.com>
8381 commit 16bee7b0dc294ee01ca2434aa1dd3bd717a69615
8382 Author: Martha Marx <mmarx@silicontkx.com>
8383 Date: Thu May 29 15:37:21 2008 -0400
8385 Consolidate ADS5121 IO Pin configuration
8387 Consolidate ADS5121 IO Pin configuration to one file
8388 board/ads5121/iopin.c.
8390 Remove pin config from cpu/mpc512x/fec.c
8392 Signed-off-by: Martha Marx <mmarx@silicontkx.com>
8393 Acked-by: Grant Likely <grant.likely@secretlab.ca>
8394 Acked-by: John Rigby <jrigby@freescale.com>
8396 commit d4692b0ba83b7b454bbd92bad1f4befe6e1657b7
8397 Author: Christian Eggers <christian@p2400.wgnetz.xx>
8398 Date: Fri Jun 27 19:46:51 2008 +0200
8400 Fix "usb part" command
8402 Only print partition for selected device if user supplied the <dev>
8403 arg with the "usb part [dev]" command.
8405 Signed-off-by: Christian Eggers <ceggers@gmx.de>
8406 Acked-by: Markus Klotzbuecher <mk@denx.de>
8408 commit cc83b27217f7380041fea386ddb6d6d9b261617d
8409 Author: Harald Welte <laforge@gnumonks.org>
8410 Date: Mon Jul 7 00:58:05 2008 +0800
8412 fix USB devices with multiple configurations
8414 This patch fixes bugs in usbdcore*.c related to the use of devices
8415 with multiple configurations.
8417 The original code made mistakes about the meaning of configuration value and
8418 configuration index, and the resulting off-by-one errors resulted in:
8420 * SET_CONFIGURATION always selected the first configuration, no matter what
8421 wValue is being passed.
8422 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
8423 configuration (index 0).
8425 Signed-off-by: Harald Welte <laforge@openmoko.org>
8426 Acked-by: Markus Klotzbuecher <mk@denx.de>
8428 commit 06c53beae1a726e707971c555613f09b270a2461
8429 Author: Wolfgang Denk <wd@denx.de>
8430 Date: Thu Jul 10 13:16:09 2008 +0200
8432 Fix some more print() format errors.
8434 Signed-off-by: Wolfgang Denk <wd@denx.de>
8436 commit d4b5f3fa001228d76e2c3380cedadf804b802c2a
8437 Author: Christian Eggers <christian@p2400.wgnetz.xx>
8438 Date: Fri Jun 27 19:46:51 2008 +0200
8440 Fix "usb part" command
8442 Only print partition for selected device if user supplied the <dev>
8443 arg with the "usb part [dev]" command.
8445 Signed-off-by: Christian Eggers <ceggers@gmx.de>
8446 Acked-by: Markus Klotzbuecher <mk@denx.de>
8448 commit e73b5212e0463a3db0af0a5c95c75bfb762ca973
8449 Author: Harald Welte <laforge@gnumonks.org>
8450 Date: Mon Jul 7 00:58:05 2008 +0800
8452 fix USB devices with multiple configurations
8454 This patch fixes bugs in usbdcore*.c related to the use of devices
8455 with multiple configurations.
8457 The original code made mistakes about the meaning of configuration value and
8458 configuration index, and the resulting off-by-one errors resulted in:
8460 * SET_CONFIGURATION always selected the first configuration, no matter what
8461 wValue is being passed.
8462 * GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first
8463 configuration (index 0).
8465 Signed-off-by: Harald Welte <laforge@openmoko.org>
8466 Acked-by: Markus Klotzbuecher <mk@denx.de>
8468 commit e870690bdca154943ecadd5212d2d59c1b9d391b
8469 Author: Stefan Roese <sr@denx.de>
8470 Date: Thu Jul 10 10:10:54 2008 +0200
8472 MTD/NAND: Fix printf format warning in nand code
8474 This patch fixes NAND related printf format warning. Those warnings are
8475 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8476 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
8479 Signed-off-by: Stefan Roese <sr@denx.de>
8481 commit 10943c9afa25694bd9999461f4e9e50ce22fff2b
8482 Author: Stefan Roese <sr@denx.de>
8483 Date: Thu Jul 10 10:00:45 2008 +0200
8485 rtc: Fix printf format warning in m41t60.c
8487 Signed-off-by: Stefan Roese <sr@denx.de>
8489 commit dc1da42f814cd71e6756c2cf62af1ada1d0581fb
8490 Author: Stefan Roese <sr@denx.de>
8491 Date: Tue Jul 8 12:01:47 2008 +0200
8493 pci: Move PCI device configuration check into a separate weak function
8495 This patch moves the check, if a device should be skipped in PCI PNP
8496 configuration into the function pci_skip_dev(). This function is defined
8497 as weak so that it can be overwritten by a platform specific one if
8498 needed. The check if the device should get printed in the PCI summary upon
8499 bootup (when CONFIG_PCI_SCAN_SHOW is defined) is moved to the function
8500 pci_print_dev() which is also defined as weak too.
8502 Signed-off-by: Stefan Roese <sr@denx.de>
8504 commit b002144e1dc21374b1ef5281fe6b5d014af96650
8505 Author: Stefan Roese <sr@denx.de>
8506 Date: Thu Jul 10 09:58:06 2008 +0200
8508 ppc4xx: Fix printf format warnings now visible with the updated format check
8510 This patch fixes ppc4xx related printf format warning. Those warnings are
8511 now visible since patch dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8512 [Fix printf errors.] by Andrew Klossner has been applied. Thanks, this is
8515 Signed-off-by: Stefan Roese <sr@denx.de>
8517 commit 5d812b8b4ad9667c77a5bf92b4ba81699abc9fc3
8518 Author: Stefan Roese <sr@denx.de>
8519 Date: Wed Jul 9 17:33:57 2008 +0200
8521 ppc4xx: Enable support for > 2GB SDRAM on AMCC Katmai
8523 Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
8524 To support such configurations, we "only" map the first 2GB via the TLB's. We
8525 need some free virtual address space for the remaining peripherals like, SoC
8528 Note that ECC is currently not supported on configurations with more than 2GB
8529 SDRAM. This is because we only map the first 2GB on such systems, and therefore
8530 the ECC parity byte of the remaining area can't be written.
8532 Signed-off-by: Stefan Roese <sr@denx.de>
8534 commit cf1c2ed91df26903b956948f37f82de9e1158a89
8535 Author: Larry Johnson <lrj@acm.org>
8536 Date: Sat Jun 14 17:02:49 2008 -0400
8538 ppc4xx: Remove implementation of testdram() from Korat board support
8540 Signed-off-by: Larry Johnson <lrj@acm.org>
8541 Signed-off-by: Stefan Roese <sr@denx.de>
8543 commit 47ce4a28ccfcfb803aa68d3d4505a8de056a8a5e
8544 Author: Larry Johnson <lrj@acm.org>
8545 Date: Sat Jun 14 16:53:02 2008 -0400
8547 ppc4xx: Update and add FDT to Korat board support
8549 Signed-off-by: Larry Johnson <lrj@acm.org>
8550 Signed-off-by: Stefan Roese <sr@denx.de>
8552 commit 4188f0491886b3b486164e819c0a83fdb97efd7d
8553 Author: Wolfgang Denk <wd@denx.de>
8554 Date: Thu Jul 10 01:13:30 2008 +0200
8556 Minor coding style cleanup; update CHANGELOG
8558 Signed-off-by: Wolfgang Denk <wd@denx.de>
8560 commit 8915f1189c1d29d8be7f4de325702d90a8988219
8561 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
8562 Date: Wed Jul 9 17:50:45 2008 -0400
8564 e1000: add support for 82545GM 64bit PCI-X copper variant
8566 This PCI-X e1000 variant works by just adding in the correct
8567 PCI IDs in the appropriate places.
8569 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
8571 commit 21ae6ca0315afdbc65dc3e95ffd5763e6773d030
8572 Author: Daniel Hellstrom <daniel@gaisler.com>
8573 Date: Wed Jul 9 12:34:11 2008 +0000
8575 SPARC: Build error fix
8577 (introduced by commit 391fd93ab23e15ab3dd58a54f5b609024009c378)
8579 This patch makes SPARC targets build again. It is caused by
8580 phys_addr_t and phys_size_t being defined in the wrong header
8581 file. include/lmb.h need those typedefs to build.
8583 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
8585 commit 11ccc33fa21acce108f6b4a6936e3271af904c64
8586 Author: Marcel Ziswiler <marcel@ziswiler.com>
8587 Date: Wed Jul 9 08:17:15 2008 +0200
8589 Many spelling fixes in README.
8591 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8593 commit dbab0691d2533560f7e91b92ae844046a9ad1df3
8594 Author: Marcel Ziswiler <marcel@ziswiler.com>
8595 Date: Wed Jul 9 08:17:06 2008 +0200
8597 Minor spelling fix in comment.
8599 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8601 commit 89134ea1f67208fd3160bdbb0b9eaab4eab98484
8602 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8603 Date: Tue Jul 8 14:54:58 2008 -0400
8605 Round the serial port clock divisor value returned by calc_divisor()
8607 Round the serial port clock divisor value returned by
8610 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8611 Signed-off-by: John Roberts <john.roberts@pwav.com>
8613 commit 9d2e3947b2944e5bb85b4335533f8c93c58445fe
8614 Author: Scott Wood <scottwood@freescale.com>
8615 Date: Wed Jul 9 17:47:52 2008 -0500
8617 NAND: ifdef-protect most of nand.h when using legacy NAND.
8619 Some macros such as NAND_CTL_SETALE conflict between current and legacy
8620 NAND, being defined by the subsystem in the former case and the board
8621 config file in the latter.
8623 Signed-off-by: Scott Wood <scottwood@freescale.com>
8625 commit 2b1fa9d383cbbb7d347c1583bd6ca4e181ba8e9e
8626 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8627 Date: Tue Jul 8 11:02:05 2008 -0400
8629 ARM: Fix for wrong patch version applied for Lyrtech SFF-SDR board (ARM926EJS)
8631 ARM: Fix for incorrect version of patch applied when
8632 adding support for the Lyrtech SFF-SDR board.
8634 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8635 Signed-off-by: Philip Balister, OpenSDR <philip@opensdr.com>
8637 commit 47042b363ee5022b8180c65d3f4558e7972c79cd
8638 Author: Kyungmin Park <kmpark@infradead.org>
8639 Date: Tue Jul 8 09:08:40 2008 +0900
8641 Remove useless print message at apollon
8643 Remove useless print message at apollon
8645 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
8647 commit 98874ff329d4a5b32c467b43f6e966e1aa68479f
8648 Author: Andy Fleming <afleming@freescale.com>
8649 Date: Mon Jul 7 14:24:39 2008 -0500
8653 The LMB code now uses phys_addr_t and phys_size_t. Also, there were a couple
8654 of casting problems in the bootm code that called the LMB functions.
8656 Signed-off-by: Andy Fleming <afleming@freescale.com>
8658 commit da8693a91b8eef75ade8de50a1b2ce035bc5fb54
8659 Author: Kumar Gala <galak@kernel.crashing.org>
8660 Date: Mon Jul 7 09:39:06 2008 -0500
8662 Fix compiler warnings
8664 gcc-4.3.x generates the following:
8666 bootm.c: In function 'do_bootm_linux':
8667 bootm.c:208: warning: cast from pointer to integer of different size
8668 bootm.c:215: warning: cast from pointer to integer of different size
8670 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
8672 commit 5bb12dbd7ae03189b6c13d8737b5a1b37c3df698
8673 Author: Harald Welte <laforge@gnumonks.org>
8674 Date: Mon Jul 7 15:40:39 2008 +0800
8676 Remove code duplication for setting the default environment
8678 common/env_common.c (default_env): new function that resets the environment to
8680 common/env_common.c (env_relocate): use default_env instead of own copy
8681 common/env_nand.c (env_relocate_spec): use default_env instead of own copy
8682 include/environment.h: added default_env prototype
8684 Signed-off-by: Werner Almesberger <werner@openmoko.org>
8685 Signed-off-by: Harald Welte <laforge@openmoko.org>
8687 commit 99c2b434d37863df5dda5207a53760c6506fc2be
8688 Author: Marcel Ziswiler <marcel@ziswiler.com>
8689 Date: Sun Jun 22 16:13:46 2008 +0200
8691 NAND: Fix warning due to missing env_ptr casts to u_char * in env_nand.c.
8693 The writeenv() and readenv() calls introduced by the recently added bad block
8694 management for environment variables were missing casts therefore producing
8695 compile time warnings.
8696 While at it fixing some typo in a comment and indentation.
8698 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
8699 Signed-off-by: Scott Wood <scottwood@freescale.com>
8701 commit 3167c5386ea1c98b638be5d8763ef6d5938ef1bd
8702 Author: Scott Wood <scottwood@freescale.com>
8703 Date: Fri Jun 20 12:38:57 2008 -0500
8705 NAND: Rename DEBUG to MTDDEBUG to avoid namespace pollution.
8707 This is particularly problematic now that non-NAND-specific code is
8708 including <nand.h>, and thus all debugging code is being compiled
8709 regardless of whether it was requested, as reported by Scott McNutt
8710 <smcnutt@psyent.com>.
8712 Signed-off-by: Scott Wood <scottwood@freescale.com>
8714 commit c3bf1ad7baa1b0dd989dedc260b7098b6089ae05
8715 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8716 Date: Thu Jun 12 19:27:58 2008 +0200
8718 mmc: Move atmel_mci driver into drivers/mmc
8720 This makes it easier to use the driver on other platforms.
8722 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8723 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8725 commit d2d54ea449639f3d1a6007e333ab9fcc609a18f0
8726 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8727 Date: Thu Jun 12 19:27:57 2008 +0200
8729 avr32: Use CONFIG_ATMEL_MCI to select the atmel_mci driver
8731 After we move the atmel_mci driver into drivers/mmc, we can't select
8732 it with CONFIG_MMC anymore. Introduce a new symbol specifically for
8733 this driver so that there's no ambiguity.
8735 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8736 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8738 commit 5ce13051a48c62bda9723df3b4778c492fb47f36
8739 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8740 Date: Thu Jun 12 19:27:56 2008 +0200
8742 Create drivers/mmc subdirectory
8744 In order to consolidate more of the various MMC drivers around the
8745 tree, we must first have a common place to put them.
8747 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
8748 Acked-by: Jean-Chritophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8750 commit b502611b51f02718c2d1117d4981dabceb5af6de
8751 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
8752 Date: Sun Jul 6 12:30:09 2008 +0200
8754 Change env_get_char from a global function ptr to a function
8756 This avoids an early global data reference.
8758 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
8760 commit 27269417ade432189b234d9fbac98b54e37b978c
8761 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
8762 Date: Sun Jul 6 13:57:58 2008 +0400
8764 Some copy-n-paste fixes in printf usage
8766 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
8768 commit 0e6989b9faf1588e8723535539e88a0df3c71356
8769 Author: Matvejchikov Ilya <matvejchikov@gmail.com>
8770 Date: Sun Jul 6 13:57:00 2008 +0400
8772 FDT memory and pci node fixes for MPC8260ADS
8774 Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
8776 commit dc4b0b38d4aadf08826f6c31270f1eecd27964fd
8777 Author: Andrew Klossner <andrew@cesa.opbu.xerox.com>
8778 Date: Mon Jul 7 06:41:14 2008 -0700
8782 The compiler will help find mismatches between printf formats and
8783 arguments if you let it. This patch adds the necessary attributes to
8784 declarations in include/common.h, then begins to correct the resulting
8785 compiler warnings. Some of these were bugs, e.g., "$d" instead of
8786 "%d" and incorrect arguments. Others were just annoying, like
8787 int-long mismatches on a system where both are 32 bits. It's worth
8788 fixing the annoying errors to catch the real ones.
8790 Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
8792 commit 417faf285b2527acb2de24c5cd3e2621d385408c
8793 Author: Becky Bruce <becky.bruce@freescale.com>
8794 Date: Wed Jul 9 11:09:41 2008 -0500
8796 Allow print_size to print in GB
8798 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
8800 commit e7c374529c87525c9aa463e0557c287887ae4e9e
8801 Author: Jason McMullan <mcmullan@netapp.com>
8802 Date: Sun Jun 8 23:56:00 2008 -0400
8804 mips: When booting Linux images, add 'ethaddr' and 'eth1addr' to the environment
8806 Add 'ethaddr' and 'eth1addr' to the Linux kernel environment if
8807 they are set in the U-Boot environment.
8809 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
8810 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
8812 commit 0192d7d56e9320819dea262f49789ae18fdd2c72
8813 Author: Stefan Roese <sr@denx.de>
8814 Date: Tue Jul 8 12:57:14 2008 +0200
8816 jedec_flash: Fix AM29DL800BB device ID
8818 As pointed out by Jerry Hicks, this patch corrects the device ID of
8819 the Spansion AM29DL800BB NOR device. Verified against latest Spansion
8820 datasheet (rev C4 from Dezember 2006).
8822 Signed-off-by: Stefan Roese <sr@denx.de>
8824 commit 689c1b30caacba3fbca0b1813facb3ab70b6cd63
8825 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8826 Date: Mon Jul 7 11:22:37 2008 +0900
8828 sh: Fix compile error sh7763rdp board
8830 Disable SH ether driver.
8832 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8834 commit 9e23fe0560b84e324dc5f0ff8813dab2aa34f074
8835 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8836 Date: Tue Jul 8 12:03:24 2008 +0900
8838 sh: Fix SH-boards compile error
8840 By Cleanup out-or-tree building for some boards (.depend)
8841 (commit:c8a3b109f07f02342d097b30908965f7261d9f15)
8842 because filse ware changed, some SH-boards have compile error.
8843 I revised this problem.
8845 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8847 commit 3473ab737282b08ad61841fcbb14c4d264a93a8e
8848 Author: Jason Jin <Jason.jin@freescale.com>
8849 Date: Tue May 13 11:50:36 2008 +0800
8851 Feed the watchdog in u-boot for 8610 board.
8853 The watchdog on 8610 board is enabled by setting sw[6]
8854 to on. Once enabled, the watchdog can not be disabled
8855 by software. So feed the dog in u-boot is necessary for
8858 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
8860 commit 63676841ca2d603b13765f3f7b72ff1a61c23f90
8861 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8862 Date: Wed Jun 18 12:10:33 2008 -0400
8864 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
8866 Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.
8868 Remove duplicate code in a if/else block in
8869 cpu/arm926ejs/davinci/lxt972.c.
8872 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8873 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8875 commit fec61431a003f5778bafa2624073a571af8bec9f
8876 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8877 Date: Wed Jun 18 12:10:31 2008 -0400
8879 Remove duplicate definitions in include/lxt971a.h.
8881 Remove duplicate definitions in include/lxt971a.h.
8883 Remove duplicate registers and bits definitions in
8884 include/lxt971a.h for standard MII registers, and
8885 use values in include/miiphy.h instead.
8887 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
8888 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8890 commit 9751ee0990f467941da0b095a4e995f863672d7a
8891 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8892 Date: Wed Jun 11 21:05:00 2008 +0900
8894 net: sh: Renesas SH7763 Ethernet device support
8896 Renesas SH7763 has 2 channel Ethernet device.
8897 This is 10/100/1000 Base support.
8898 But this patch check 10/100 Base only.
8900 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8901 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
8903 commit 873d97aabc0b1c8822ed1d87e8c5c8ae0a7e4ae9
8904 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8905 Date: Tue Jun 17 16:28:05 2008 +0900
8907 sh: Update Renesas R2DPlus board
8909 New NOR Flash board support and remove old type flash board config.
8910 And Remove network setting from config file.
8912 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8913 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8915 commit ec39d479d2003f15e86e23ebc4e02a1c9a3a181c
8916 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8917 Date: Tue Jun 17 16:28:01 2008 +0900
8919 sh: Update Renesas R7780MP board
8921 New NOR Flash board support and remove network setting from config file.
8923 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8924 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8926 commit c001cd604e9f133743effbddb1c215b48e761c5a
8927 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8928 Date: Tue Jun 17 16:27:56 2008 +0900
8930 sh: Update Renesas Migo-R board
8932 Remove network setting from config file.
8934 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8935 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8937 commit f9599eca7cb5ebe40e5305c8006dced6ecc5cd9e
8938 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8939 Date: Tue Jun 17 16:27:52 2008 +0900
8941 sh: Update Hitachi MS7722SE board
8943 Remove network setting from config file.
8945 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8946 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8948 commit 26209e48e8791670c93108029a5c31a30016c6df
8949 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8950 Date: Tue Jun 17 16:27:48 2008 +0900
8952 sh: Cleanup source code of SH7763RDP
8954 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8955 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8957 commit 5cd5b2c96ef0025762931349d350287aec03ab47
8958 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8959 Date: Tue Jun 17 16:27:44 2008 +0900
8961 sh: Cleanup source code of R2DPlus
8963 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8964 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8966 commit 4ec7e915cfaa31b392755dd2c8231e64736d2ea8
8967 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8968 Date: Tue Jun 17 16:27:41 2008 +0900
8970 sh: Cleanup source code of R7780MP
8972 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8973 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8975 commit 0955ef34c0454ae2ee59a78657a0f01fb3ef16d6
8976 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8977 Date: Tue Jun 17 16:27:38 2008 +0900
8979 sh: Cleanup source code of MS7722SE
8981 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8982 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8984 commit 1d7b31d97b34ccb6f9b20a2465864998b0bf2691
8985 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8986 Date: Tue Jun 17 16:27:34 2008 +0900
8988 sh: Cleanup source code of MS7720SE
8990 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
8991 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
8993 commit 3ab4827cbe409488ebea1a2ee5094783f2672214
8994 Author: Wolfgang Denk <wd@denx.de>
8995 Date: Mon Jul 7 00:45:03 2008 +0200
8997 SH: fix out of tree building
8999 Signed-off-by: Wolfgang Denk <wd@denx.de>
9001 commit 9047bfa1e737d787be460387dd6f45737eeceb10
9002 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9003 Date: Thu Jul 3 23:16:06 2008 +0900
9005 net: smc911x: Fix typo
9007 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
9009 commit 5ed546fdd0ca46a165661c2009fa743d9c9fceca
9010 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9011 Date: Wed Jul 2 18:54:08 2008 +0200
9013 update mvBL-M7 board config
9015 update mvBL-M7 config file to use UBOOT_VERSION and define
9018 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9020 commit 5cacc5d0ec52678a5eb83ecda5c3bcb22eb47f30
9021 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9022 Date: Mon Jun 30 17:45:01 2008 +0900
9024 net: fix compile problem in smc911x driver.
9026 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9027 Acked-by: Ben Warren <biggerbadderben@gmail.com>
9029 commit 9fea65a6c469b1b474b27446feb58738baba2d31
9030 Author: Michal Simek <monstr@monstr.eu>
9031 Date: Tue Jun 24 09:54:09 2008 +0200
9033 ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405
9035 This change helps with better handling with others
9036 Xilinx based platform.
9038 Signed-off-by: Michal Simek <monstr@monstr.eu>
9039 Acked-by: Stefan Roese <sr@denx.de>
9041 commit cbb6289569ae4fc6e2d676528e46ffcc72d743d0
9042 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9043 Date: Tue Jun 17 13:07:11 2008 +0900
9045 net: ne2000: Move dev_addr variable from grobal to local.
9047 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9048 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9050 commit dd7e5fa5f847188f78f62f2c52de6cb3def3ecdb
9051 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9052 Date: Tue Jun 17 13:07:15 2008 +0900
9054 net: ne2000: Fix compile error of NE2000
9056 If enable DEBUG, can not compile ne2000 driver.
9058 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
9059 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9061 commit dd35479a50f6c7c31ea491c07c5200c6dfd06a24
9062 Author: Ben Warren <biggerbadderben@gmail.com>
9063 Date: Mon Jun 23 22:57:27 2008 -0700
9065 Add mechanisms for CPU and board-specific Ethernet initialization
9067 This patch is the first step in cleaning up net/eth.c, by moving Ethernet
9068 initialization to CPU or board-specific code. Initial implementation is
9069 only on the Freescale TSEC controller, but others will be added soon.
9071 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9073 commit 7754f2be5d1835d263aad21b5a629526f3e680b0
9074 Author: Wolfgang Denk <wd@denx.de>
9075 Date: Sun Jul 6 01:21:46 2008 +0200
9077 include/sha256.h: fix file permissions.
9079 Signed-off-by: Wolfgang Denk <wd@denx.de>
9081 commit d3bcdf838e2991d58571308fa6e04ca335bc06e8
9082 Author: Patrice Vilchez <patrice.vilchez@atmel.com>
9083 Date: Tue May 27 11:15:29 2008 +0200
9085 [AT91SAM9] Fix NAND FLASH timings
9087 Fix NAND FLASH timings for at91sam9x evaluation kits.
9089 New timings are based on application note
9090 "NAND Flash Support on AT91SAM9 Microcontrollers" available at
9091 http://atmel.com/dyn/resources/prod_documents/doc6255.pdf
9093 Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
9094 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9095 Acked-by: Stelian Pop <stelian@popies.net>
9097 commit 19bd688484322fe62d1a66c8299da6ff9e967ff9
9098 Author: Stelian Pop <stelian@popies.net>
9099 Date: Thu May 22 00:15:40 2008 +0200
9101 Fix boot from NOR due to incorrect reset delay.
9103 AT91 RSTC registers are battery-backuped, so their values
9104 are not reset across power cycles. One of those registers,
9105 the AT91_RSTC_MR register, is being modified by U-Boot, in
9106 the ethernet initialisation routine, to generate a 500ms
9109 Unfortunately, this value is not being restored afterwards,
9110 causing subsequent resets to also last for 500ms.
9112 This long reset sequence causes problems (at least) in the
9113 boot sequence from NOR: by the time the CPU tries to load
9114 a program from the NOR flash, the latter is still in reset
9115 and not yet available.
9117 Additionaly, this patch fixes a bug in the original code which
9118 caused the reset delay to last for 2s instead of 500ms.
9120 Signed-off-by: Stelian Pop <stelian@popies.net>
9121 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9123 commit f492dd636fbbae529e17533995bc6e5813c007f6
9124 Author: Wolfgang Denk <wd@denx.de>
9125 Date: Fri Jul 4 20:11:49 2008 +0200
9129 Signed-off-by: Wolfgang Denk <wd@denx.de>
9131 commit 5e6e350fc489aa19402f1e79037dd8c0a4bbd73d
9132 Author: Wolfgang Denk <wd@denx.de>
9133 Date: Fri Jul 4 20:07:35 2008 +0200
9135 CCM/SCM boards: fix out of tree building
9137 Signed-off-by: Wolfgang Denk <wd@denx.de>
9139 commit ab4c3a490df9a964711556d2a05b0c787db45fde
9140 Author: Wolfgang Denk <wd@denx.de>
9141 Date: Thu Jul 3 23:22:27 2008 +0200
9143 SCM board: fix build errors.
9145 Signed-off-by: Wolfgang Denk <wd@denx.de>
9147 commit a566466f17ba0e2d2b6c250e77da678fb932470d
9148 Author: Wolfgang Denk <wd@denx.de>
9149 Date: Thu Jul 3 23:06:36 2008 +0200
9151 IAD210 board: fix ``"ALIGN" redefined'' warning.
9153 Signed-off-by: Wolfgang Denk <wd@denx.de>
9155 commit ad756314797c16fa5dca23e115aab881011f164f
9156 Author: Wolfgang Denk <wd@denx.de>
9157 Date: Thu Jul 3 23:00:24 2008 +0200
9159 CCM board: fix build errors.
9161 Signed-off-by: Wolfgang Denk <wd@denx.de>
9163 commit f16ed51702cb9fb6fa2e019bbc0fcd1466b57c3b
9164 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9165 Date: Wed Jul 2 18:54:08 2008 +0200
9167 update mvBL-M7 board config
9169 update mvBL-M7 config file to use UBOOT_VERSION.
9171 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9172 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9174 commit ced209c50e80c25f13c083099b05044048d21f4f
9175 Author: Wolfgang Denk <wd@denx.de>
9176 Date: Thu Jul 3 22:39:21 2008 +0200
9178 sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"
9180 Signed-off-by: Wolfgang Denk <wd@denx.de>
9182 commit 4ff170a8180a79da4cdaab1b30d58cd7b6be565e
9183 Author: Wolfgang Denk <wd@denx.de>
9184 Date: Thu Jul 3 22:34:08 2008 +0200
9186 Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors
9188 Signed-off-by: Wolfgang Denk <wd@denx.de>
9190 commit 730f298485984b011b6ee8f4acb511cb45a843dd
9191 Author: Wolfgang Denk <wd@denx.de>
9192 Date: Thu Jul 3 22:04:17 2008 +0200
9194 lmb: fix "implicit declaration of function 'lmb_free'" warning
9196 Signed-off-by: Wolfgang Denk <wd@denx.de>
9198 commit 322ef5e28d2dc62571afc699b00add22a8e006e4
9199 Author: Wolfgang Denk <wd@denx.de>
9200 Date: Wed Jul 2 23:53:23 2008 +0200
9202 Cleanup: remove redundant deleting on *~ files
9204 Signed-off-by: Wolfgang Denk <wd@denx.de>
9206 commit c8a3b109f07f02342d097b30908965f7261d9f15
9207 Author: Wolfgang Denk <wd@denx.de>
9208 Date: Wed Jul 2 23:49:18 2008 +0200
9210 Cleanup out-or-tree building for some boards (.depend)
9212 Signed-off-by: Wolfgang Denk <wd@denx.de>
9214 commit a30cc5a340e7f8f5f85a0e08e7f6c4106ce117c4
9215 Author: Wolfgang Denk <wd@denx.de>
9216 Date: Wed Jul 2 23:38:50 2008 +0200
9218 Cleanup: fix out-of-tree building for some boards
9220 Signed-off-by: Wolfgang Denk <wd@denx.de>
9222 commit 461fa68d20861811487944d22291db5a13410e20
9223 Author: Wolfgang Denk <wd@denx.de>
9224 Date: Wed Jul 2 23:00:14 2008 +0200
9226 Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)
9228 Signed-off-by: Wolfgang Denk <wd@denx.de>
9230 commit 5981ebd32017e062b08aa6747cf591276f2db779
9231 Author: Detlev Zundel <dzu@denx.de>
9232 Date: Fri Jun 20 22:26:24 2008 +0200
9234 fdt: Fix typo in variable name.
9236 Signed-off-by: Detlev Zundel <dzu@denx.de>
9238 commit a7a5982cd0f3482f88225af4da7795bc4f6cb9bc
9239 Author: Gary Jennejohn <garyj@denx.de>
9240 Date: Thu Jun 19 11:11:19 2008 +0200
9242 Add logos for RRvision board
9244 Signed-off-by: Gary Jennejohn <garyj@denx.de>
9246 commit ee4ae38342142237ca85913f88ee570c1eb5ca7c
9247 Author: Esben Haabendal <EsbenHaabendal@gmail.com>
9248 Date: Wed Jun 18 11:03:57 2008 +0200
9250 mpc8260: add fdt_fixup_ethernet support
9252 Add support for updating mac-address and local-mac-address in fdt for
9253 all MPC8260 targets.
9255 Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>
9257 commit f6a69559d64498a04e1e0b087a9b920e5775f866
9258 Author: Steven A. Falco <sfalco@harris.com>
9259 Date: Thu Jun 12 13:24:42 2008 -0400
9261 cmd_nvedit.c: clean up syntax highlighting
9263 My text-editor (vim) has a bit of trouble syntax-highlighting the
9264 cmd_nvedit.c file, because it apparently does not parse C
9265 ifdef/else/endif. The following patch does not change the behavior of
9266 the code at all, but does allow the editor to properly
9267 syntax-highlight the file.
9269 Signed-off-by: Steve Falco <sfalco@harris.com>
9271 commit 75678c807a6272ecc5541eb32898c93887f08400
9272 Author: Steven A. Falco <sfalco@harris.com>
9273 Date: Thu Jun 12 13:22:12 2008 -0400
9275 Make setenv() return status
9277 Currently, the setenv function does not return an error code.
9278 This patch allows to test for errors.
9280 Signed-off-by: Steve Falco <sfalco@harris.com>
9282 commit 4928e97c8531283ca9b368b7c29a8a12e726562a
9283 Author: Kumar Gala <galak@kernel.crashing.org>
9284 Date: Wed Jun 11 10:14:06 2008 -0500
9286 PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops
9288 fls64, __ilog2_u64, ffs64 are variants that work on an u64,
9289 and fls is used to implement them.
9291 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9293 commit 83002a77cbdf383015ca384eff5fa31722d8e571
9294 Author: Magnus Lilja <lilja.magnus@gmail.com>
9295 Date: Mon Jun 9 22:58:48 2008 +0200
9297 i.MX31: Cleanup comments in lowlevel_init.S.
9299 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
9301 commit f8cc312bbee69257d741dc9f4062f4a0f5adf609
9302 Author: Ben Warren <biggerbadderben@gmail.com>
9303 Date: Sun Jun 8 23:28:33 2008 -0700
9305 Move conditional compilation of MPC8XXX SPI driver to Makefile
9307 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
9309 commit d92ea21bafb674ee2bf27447970b047845e7b0a2
9310 Author: Juergen Kilb <J.Kilb@gmx.de>
9311 Date: Sun Jun 8 17:59:53 2008 +0200
9313 i.MX31: fixed CTRL-C detection
9315 The Register URXD contains status information in bits [15..8].
9316 With status bit 15 set, CTRL-C was reported as 0x8003 instead
9317 of 0x03. Therefore CTRL-C was not detected.
9318 To solve this, bits [15..8] were masked out now.
9320 Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
9321 Acked-by: Felix Radensky <felix@embedded-sol.com>
9323 commit dd1c5523d6f44e842e69f2fcb50788c6060eab86
9324 Author: Stefan Roese <sr@denx.de>
9325 Date: Tue Jul 1 17:03:19 2008 +0200
9327 ppc4xx: Fix 460EX/GT PCIe port initialization
9329 This patch fixes a bug where the 460EX/GT PCIe UTLSET1 register was
9330 configured incorrectly. Thanks to Olga Buchonina from AMCC for pointing
9333 Signed-off-by: Stefan Roese <sr@denx.de>
9335 commit b571afde0295b007a45055ee49f8822c753a5651
9336 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9337 Date: Sat Jun 7 12:29:52 2008 +0200
9341 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9342 Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>
9344 commit 3bab76a26e03df4ff81342fcc16393ce37d9766b
9345 Author: Marian Balakowicz <m8@semihalf.com>
9346 Date: Fri Jun 6 23:07:40 2008 +0200
9348 Delay FIT format check on sector based devices
9350 Global FIT image operations like format check cannot be performed on
9351 a first sector data, defer them to the point when whole FIT image was
9352 uploaded to a system RAM.
9354 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
9355 Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
9356 NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>
9358 commit 9810263afec5ac5f38f92963bb3b6d799e4331d0
9359 Author: Dave Liu <r63238@freescale.com>
9360 Date: Tue Jun 3 17:38:19 2008 +0800
9362 sata: wait for device updating signature to host
9364 The driver need wait for the device updating signature to host.
9365 If we don't wait for it, the driver can not detect the device(disk)
9366 when the system powers up.
9368 Signed-off-by: Dave Liu <daveliu@freescale.com>
9370 commit 745d8a0d3cea82e6d1753e14afb4588c34761b15
9371 Author: Stefan Roese <sr@denx.de>
9372 Date: Sat Jun 28 14:56:17 2008 +0200
9374 ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic
9376 This patch implements a fix provided by AMCC so that the lockup upon
9377 simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
9380 Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
9381 (bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
9382 USB 2.0 host and SATA.
9384 This errata is not officially available yet. I'll update the comment
9385 to add the errata number later.
9387 Signed-off-by: Stefan Roese <sr@denx.de>
9389 commit 8b616edb118e37d05f6401389eaee1c636b22828
9390 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
9391 Date: Mon Jun 2 16:42:19 2008 -0400
9393 serial_pl010.c: add watchdog support
9395 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
9397 commit 86d3273e2b7be3fffb45e20c08535d6ad3aded6b
9398 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
9399 Date: Mon Jun 2 16:40:08 2008 -0400
9401 jffs2_1pass.c: add watchdog support
9403 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
9405 commit 5744ddc6637fea4f7b911a54a5fa860cb81a5d89
9406 Author: Sascha Laue <sascha.laue@liebherr.com>
9407 Date: Fri May 30 09:48:14 2008 +0200
9409 Configure DSP POST; add watchdog reset to diag command
9411 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
9413 commit f13526517859bf6b573e23ff47199e107d1009b5
9414 Author: Tor Krill <tor@excito.com>
9415 Date: Thu May 29 10:40:17 2008 +0200
9417 Add sata sil3114 support
9419 Signed-off-by: Tor Krill <tor@excito.com>
9421 commit e093a247628228100f405b6d7f6b1bfc16141938
9422 Author: Wolfgang Denk <wd@denx.de>
9423 Date: Sat Jun 28 23:34:37 2008 +0200
9425 Coding Style Cleanup
9427 Signed-off-by: Wolfgang Denk <wd@denx.de>
9429 commit 01db232dd7a0ceb81208a9f2545720c80e5bfd83
9430 Author: Wolfgang Denk <wd@denx.de>
9431 Date: Sat Jun 28 23:16:01 2008 +0200
9435 Signed-off-by: Wolfgang Denk <wd@denx.de>
9437 commit c7f879ec2b389c4f2bf726b293bd516f4c692e03
9438 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9439 Date: Wed May 21 13:58:41 2008 -0400
9441 ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)
9443 This patch adds support for the Lyrtech SFF-SDR board,
9444 based on the TI DaVinci architecture (ARM926EJS).
9446 Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
9447 Signed-off-by: Philip Balister <philip@balister.org>
9448 Signed-off-by: Wolfgang Denk <wd@denx.de>
9450 commit 341188b9ccaa8d4462d772cc067aca8d7618633a
9451 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9452 Date: Thu May 22 11:09:59 2008 +0200
9454 MMC: Consolidate MMC/SD command definitions
9456 This moves the MMC and SD Card command definitions from
9457 include/asm/arch/mmc.h into include/mmc.h. These definitions are
9458 given by the MMC and SD Card standards, not by any particular
9461 There's a lot more room for consolidation in the MMC drivers which
9462 I'm hoping to get done eventually, but this patch is a start.
9464 Compile-tested for all avr32 boards as well as lpc2292sodimm and
9465 lubbock. This should cover all three mmc drivers in the tree.
9467 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9469 commit fa60edfc4c952626e048c0e065f654b3c1822fa5
9470 Author: Kyungmin Park <kmpark@infradead.org>
9471 Date: Wed May 21 14:38:08 2008 +0900
9473 Use better Ethernet timings for apollon board
9475 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
9477 commit 41c5eaa7253ed82bbae1eda5667755872c615164
9478 Author: Andy Fleming <afleming@freescale.com>
9479 Date: Mon Jun 16 13:58:56 2008 -0500
9481 Resize device tree to allow space for board changes and the chosen node
9483 Current code requires that a compiled device tree have space added to the end to
9484 leave room for extra nodes added by board code (and the chosen node). This
9485 requires that device tree creators anticipate how much space U-Boot will add to
9486 the tree, which is absurd. Ideally, the code would resize and/or relocate the
9487 tree when it needed more space, but this would require a systemic change to the
9488 fdt code, which is non-trivial. Instead, we resize the tree inside
9489 boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
9490 where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.
9492 Signed-off-by: Andy Fleming <afleming@freescale.com>
9494 commit 7570a9941fc565922078679a72d246fe208d696d
9495 Author: Andy Fleming <afleming@freescale.com>
9496 Date: Mon Jun 16 13:58:55 2008 -0500
9498 Fix an underflow bug in __lmb_alloc_base
9500 __lmb_alloc_base can underflow if it fails to find free space. This was fixed
9501 in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc. This patch
9502 merely updates __lmb_alloc_base to resemble the current version in Linux.
9504 Signed-off-by: Andy Fleming <afleming@freescale.com>
9506 commit 63796c4e61b207d2e635729d41b7a7f7d188b03c
9507 Author: Andy Fleming <afleming@freescale.com>
9508 Date: Mon Jun 16 13:58:54 2008 -0500
9512 lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
9513 lmb_reserve to temporarily reserve some memory.
9515 Signed-off-by: Andy Fleming <afleming@freescale.com>
9517 commit 4b03ac8b5102ad95f9fede7d13fa236977593e7d
9518 Author: Andy Fleming <afleming@freescale.com>
9519 Date: Mon Jun 16 13:58:53 2008 -0500
9523 ALIGN() returns the smallest aligned value greater than the passed
9524 in address or size. Taken from Linux.
9526 Signed-off-by: Andy Fleming <afleming@freescale.com>
9528 commit 93262af85e3e9d9974c6c08fbd37a9a72e090ca2
9529 Author: Stefan Roese <sr@denx.de>
9530 Date: Tue Jun 24 17:15:22 2008 +0200
9532 ppc4xx: Fix compilation problems with phys_size_t
9534 This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
9535 board specific files where it has been missing.
9537 Signed-off-by: Stefan Roese <sr@denx.de>
9539 commit 28eab0d77352b84885f938759bf2612b7bf0bc44
9540 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
9541 Date: Mon May 19 12:26:38 2008 +0200
9543 Conditionally add -fno-stack-protector to CFLAGS
9545 When compile-testing on powerpc, I get errors like this:
9547 net/nfs.c:422: undefined reference to `__stack_chk_fail_local'
9549 This seems to be because -fstack-protector is on by default, so
9550 let's explicitly disable it on all architectures that support the
9553 The Ubuntu toolchain is affected by this problem, and according to
9554 Mike Frysinger, Gentoo has been running with SSP enabled for years.
9555 More and more distros are turning SSP on by default, so this problem
9556 is likely to get worse in the future.
9558 Also, powerpc just happens to be one of the arches I do
9559 compile-testing on. There may be other arches affected by this too.
9561 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
9563 commit dfd3be881c03a26e31f0dea4a42e76061fa610ac
9564 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9565 Date: Sun May 18 19:09:52 2008 +0200
9567 pcmcia/ti_pci1410a: Move compile condition to the Makefile
9569 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9571 commit 72d5d5f7b5c74a188df238ec6dd824d80c74857a
9572 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9573 Date: Sun May 18 19:09:51 2008 +0200
9575 pxa_pcmcia: Move compile condition to the Makefile
9577 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9579 commit c9eff32881fb429101c937cf8c268f1d42e5c2a9
9580 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9581 Date: Sun May 18 19:09:50 2008 +0200
9583 marabun_pcmcia: Move compile condition to the Makefile
9585 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
9587 commit 6a19c46cae43c16c528eddefae3db97134f1915d
9588 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9589 Date: Mon Jun 23 13:25:34 2008 +0200
9591 fix non-working mvBL-M7
9593 Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.
9595 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9596 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9598 commit 846f1574ddddeda2bc227655e687308695f41cdc
9599 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
9600 Date: Mon Jun 23 11:40:56 2008 +0200
9602 fix system config overwrite @ MPC834x and MPC8313
9604 During 83xx setup the "System I/O configuration register high" gets
9605 overwritten with user defined value if CFG_SICRH is defined.
9607 Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
9608 must keep their reset value regardless of configuration.
9610 On my board (using RGMII) those bits are set after reset - yet it's
9611 unclear where they come from.
9613 The patch keeps both bits on MPC834x and MPC8313.
9615 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
9616 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9618 commit 4890246a2c5df90a74e2941e3673a49bbd36aee9
9619 Author: Kim Phillips <kim.phillips@freescale.com>
9620 Date: Tue Jun 17 17:45:27 2008 -0500
9622 mpc83xx: move CPU_TYPE_ENTRY over to processor.h
9626 cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
9627 In file included from cpu.c:33:
9628 /home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition
9630 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
9632 commit aac7a5095b968d6c9a3e6422f31b4ad203cac9c8
9633 Author: Stefan Roese <sr@denx.de>
9634 Date: Mon Jun 23 11:15:09 2008 +0200
9636 ppc4xx: Fix problem in gpio_config()
9638 As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
9639 left by one. So the additional shift is bogus.
9641 Signed-off-by: Stefan Roese <sr@denx.de>
9643 commit 40777812316fc252c941665c0f60c148fd79d50f
9644 Author: Detlev Zundel <dzu@denx.de>
9645 Date: Fri Jun 20 22:24:05 2008 +0200
9647 fdt: Fix typo in variable name.
9649 Signed-off-by: Detlev Zundel <dzu@denx.de>
9651 commit 5f723a3b98c630bde33de74351f2121691fdef14
9652 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9653 Date: Fri Jun 20 10:41:05 2008 +0200
9655 avr32: Enable SPI flash support on ATNGW100
9657 The ATNGW100 has 8MB DataFlash on board. Give users access to it through
9658 the new SPI flash framework.
9660 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9662 commit 5605ef6b5802921cbefe6a933a9dea3497396b5c
9663 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9664 Date: Fri Jun 20 12:44:28 2008 +0200
9666 avr32: Fix SPI portmux initialization
9668 Use the new GPIO manipulation functions to set up the chip select lines,
9669 and make sure both busses use GPIO for chip select control.
9671 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9673 commit 4688f9e34a87e825aed34d07c9ca7a273e6fc8ab
9674 Author: Peter Ma <pma@mediamatech.com>
9675 Date: Sun Jun 1 22:59:24 2008 -0700
9677 avr32: Add GPIO manipulation functions
9679 Adds GPIO manipulation functions for AVR32 AP7 platform.
9681 Signed-off-by: Peter Ma <pma@mediamatech.com>
9682 [haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
9683 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
9685 commit b4fe1a71090c73efc6e4188eed188b2ff67fc02a
9686 Author: Wolfgang Grandegger <wg@grandegger.com>
9687 Date: Thu Jun 5 13:02:30 2008 +0200
9689 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
9691 This patch is based on the following patch sent a few minutes ago:
9692 "NAND FSL UPM: driver re-write using the hwcontrol callback"
9693 It is untested, of course. Anton, could you please give it a try.
9695 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
9696 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9698 commit 96026d42fa4e646d28318c0a1438aac4b2017909
9699 Author: Anatolij Gustschin <agust@denx.de>
9700 Date: Thu Jun 12 12:40:11 2008 +0200
9704 Building for 4xx doesn't work since commit 4dbdb768:
9706 In file included from 4xx_pcie.c:28:
9707 include/asm/processor.h:971: error: expected ')' before 'ver'
9708 make[1]: *** [4xx_pcie.o] Error 1
9710 This patch fixes the problem.
9712 Signed-off-by: Anatolij Gustschin <agust@denx.de>
9713 Acked-by: Stefan Roese <sr@denx.de>
9714 Acked-by: Kumar Gala <galak@kernel.crashing.org>
9716 commit a036b0443657fe0f4773786de9092251869f08ac
9717 Author: Kumar Gala <galak@kernel.crashing.org>
9718 Date: Thu Jun 19 01:45:50 2008 -0500
9720 MPC8610HPCD: Report board id, board version and fpga version.
9722 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9724 commit 7de8c21f14df9c20fdcf6027aec8e8545f75f835
9725 Author: Kumar Gala <galak@kernel.crashing.org>
9726 Date: Thu Jun 19 01:45:27 2008 -0500
9728 MPC8641HPCN: Report board id, board version and fpga version.
9730 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9732 commit fb8c061ea05fc68d37e2a8b9f8c949d76c8d71a8
9733 Author: Stefan Roese <sr@denx.de>
9734 Date: Mon Jun 16 10:40:02 2008 +0200
9736 cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably
9738 This patch simplifies flash_toggle() (AMD commandset), which is used to
9739 detect if a FLASH device is still busy with erase/program operations. On
9740 800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
9741 did not detect the busy state reliably, resulting in non erased sectors
9742 etc. This patch now simplifies this function by "just" comparing the
9743 complete data-word instead of ANDing it with the command-word (0x40)
9744 before the compatison. It is done the same way in the Linux implementation
9745 chip_ready() in cfi_cmdset_0002.c.
9747 Signed-off-by: Stefan Roese <sr@denx.de>
9749 commit 9e4006bca3d9fb4a2d061996771036cb01e539d3
9750 Author: Philip Balister <philip@balister.org>
9751 Date: Mon Jun 16 08:58:07 2008 -0400
9753 NAND: Add missing declaration to non-redundant saveenv().
9755 Signed-off-by: Scott Wood <scottwood@freescale.com>
9757 commit 2cdb7f50ac59594540fffdf8dbd7b12beac79c52
9758 Author: Wolfgang Grandegger <wg@grandegger.com>
9759 Date: Mon Jun 2 15:09:55 2008 +0200
9761 MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver
9763 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
9764 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
9765 Signed-off-by: Scott Wood <scottwood@freescale.com>
9767 commit 212ed90615c3d20fa6bd73d70d5153bd0d124e5f
9768 Author: Stefan Roese <sr@denx.de>
9769 Date: Tue Jun 10 15:34:11 2008 +0200
9771 ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output
9773 This patch disables the square wave output of the M41T62 RTC used on
9774 Canyonlands & Glacier. Here the explanation:
9776 The serial real-time clock part used in the design is an
9777 STMicro M41T62. This part has a full-time 32KHz square wave
9778 output that is connected to the TmrClk input to the
9779 processor. The default state for this square wave output is
9780 enabled so the output runs continuously when the board is
9781 powered normally and also from the battery. The TmrClk input
9782 to the processor goes to ground when the power is removed
9783 from the board/processor, and therefore the running square
9784 wave output is driving ground which drains the battery quickly.
9786 Signed-off-by: Stefan Roese <sr@denx.de>
9788 commit a94f22f08f280905926219e568568964cb9eeb9d
9789 Author: Andy Fleming <afleming@freescale.com>
9790 Date: Wed Jun 11 18:10:20 2008 -0500
9792 Fix build issue with string.h and linux/string.h
9795 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
9796 Author: Wolfgang Denk <wd@denx.de>
9797 Date: Fri Jun 6 14:28:14 2008 +0200
9799 tools/mkimage: fix compiler warnings on some systems.
9801 Broke building on some systems, because the host's string.h was interfering
9802 with u-boot's linux/string.h. It doesn't look like we need the u-boot one if
9803 we're building for the host, so now we only include when building inside
9806 Signed-off-by: Andy Fleming <afleming@freescale.com>
9808 commit 9973e3c614721bbf169882ffc3be266a6611cd60
9809 Author: Becky Bruce <becky.bruce@freescale.com>
9810 Date: Mon Jun 9 16:03:40 2008 -0500
9812 Change initdram() return type to phys_size_t
9814 This patch changes the return type of initdram() from long int to phys_size_t.
9815 This is required for a couple of reasons: long int limits the amount of dram
9816 to 2GB, and u-boot in general is moving over to phys_size_t to represent the
9817 size of physical memory. phys_size_t is defined as an unsigned long on almost
9818 all current platforms.
9820 This patch *only* changes the return type of the initdram function (in
9821 include/common.h, as well as in each board's implementation of initdram). It
9822 does not actually modify the code inside the function on any of the platforms;
9823 platforms which wish to support more than 2GB of DRAM will need to modify
9824 their initdram() function code.
9826 Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
9829 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9831 commit 391fd93ab23e15ab3dd58a54f5b609024009c378
9832 Author: Becky Bruce <becky.bruce@freescale.com>
9833 Date: Mon Jun 9 20:37:18 2008 -0500
9835 Change lmb to use phys_size_t/phys_addr_t
9837 This updates the lmb code to use phys_size_t
9838 and phys_addr_t instead of unsigned long. Other code
9839 which interacts with this code, like getenv_bootm_size()
9842 Booted on MPC8641HPCN, build-tested ppc, arm, mips.
9844 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9846 commit 61b09fc2952dc636017df4e7970e3de132276ba1
9847 Author: Becky Bruce <becky.bruce@freescale.com>
9848 Date: Mon Jun 9 20:37:17 2008 -0500
9850 Change print_size to take phys_size_t
9852 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9854 commit b57ca3e128cc10a133ba79bc7ec3e7b50e7c8fbe
9855 Author: Becky Bruce <becky.bruce@freescale.com>
9856 Date: Mon Jun 9 20:37:16 2008 -0500
9858 Change bd/gd memsize/ram_size to be phys_size_t.
9860 Currently, both are defined as an unsigned long, but
9861 should be phys_size_t. This should result in no real change,
9862 since phys_size_t is currently an unsigned long for all the
9863 default configs. Also add print_lnum to cmd_bdinfo to deal
9864 with the potentially wider memsize.
9866 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
9868 commit ba04f7010958e88a8910f2a123fee53fdc72e013
9869 Author: Kumar Gala <galak@kernel.crashing.org>
9870 Date: Tue Jun 10 16:16:02 2008 -0500
9872 FSL LAW: Add new interface to use the last free LAW
9874 LAWs have the concept of priority so its useful to be able to allocate
9875 the lowest (highest number) priority. We will end up using this with the
9878 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9880 commit 859a86a25c569d3665ff413d1d923394b8a961f3
9881 Author: Kumar Gala <galak@kernel.crashing.org>
9882 Date: Wed Jun 11 00:51:45 2008 -0500
9884 85xx/86xx: Move to dynamic mgmt of LAWs
9886 With the new LAW interface (set_next_law) we can move to letting the
9887 system allocate which LAWs are used for what purpose. This makes life
9888 a bit easier going forward with the new DDR code.
9890 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9891 Signed-off-by: Andy Fleming <afleming@freescale.com>
9892 Acked-by: Jon Loeliger <jdl@freescale.com>
9893 Acked-by: Becky Bruce <becky.bruce@freescale.com>
9895 commit f060054dadbbe7027ca088eed806a3ef1f82fdb7
9896 Author: Kumar Gala <galak@kernel.crashing.org>
9897 Date: Wed Jun 11 00:44:10 2008 -0500
9899 FSL LAW: Keep track of LAW allocations
9901 Make it so we keep track of which LAWs have allocated and provide
9902 a function (set_next_law) which can allocate a LAW for us if one is
9905 In the future we will move to doing more "dynamic" LAW allocation
9906 since the majority of users dont really care about what LAW number
9909 Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them
9911 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9912 Signed-off-by: Andy Fleming <afleming@freescale.com>
9914 commit ddde74a159caa6e18b481fec01d40b885aebb566
9915 Author: Kumar Gala <galak@kernel.crashing.org>
9916 Date: Mon Jun 9 22:31:57 2008 -0500
9918 85xx: remove dummy board_early_init_f
9920 A number of board ports have empty version of board_early_init_f
9921 for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F.
9923 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9925 commit 81e56e9af0d43712db8efb843606a8d62eab454f
9926 Author: Kumar Gala <galak@kernel.crashing.org>
9927 Date: Mon Jun 9 18:55:38 2008 -0500
9929 MPC8544DS: Update config.h
9931 * Enable flash progress
9932 * remove CLEAR_LAW0 since we dont really use it
9934 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9936 commit 978e81604c1b28526ed580df0fbe64eb8384e94f
9937 Author: Kumar Gala <galak@kernel.crashing.org>
9938 Date: Mon Jun 9 13:37:24 2008 -0500
9940 85xx: Remove unused and unconfigured memory test code.
9942 Remove unused and unconfigured DDR test code from FSL 85xx boards.
9943 Besides, other common code exists.
9945 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
9947 commit a23cddde1a95f987e3fe2a720a7ec9375b7264d7
9948 Author: Sergei Poselenov <sposelenov@emcraft.com>
9949 Date: Fri Jun 6 15:42:45 2008 +0200
9951 Socrates: Added FPGA base address update in FDT.
9953 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9955 commit fd51b0e0e620b8bc9fd4f6daa3a4fa6f5e1316f4
9956 Author: Sergei Poselenov <sposelenov@emcraft.com>
9957 Date: Fri Jun 6 15:42:44 2008 +0200
9959 Socrates: NAND support added. Changed the U-Boot base address and
9961 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9963 commit 248ae5cfc8bf69074d1da099dc495d8e06070547
9964 Author: Sergei Poselenov <sposelenov@emcraft.com>
9965 Date: Fri Jun 6 15:42:43 2008 +0200
9967 NAND: Added support for 128-bit OOB, adapted
9969 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9971 commit 31ca0208612f2eb57690110d7c2815953650e47b
9972 Author: Sergei Poselenov <sposelenov@emcraft.com>
9973 Date: Fri Jun 6 15:42:42 2008 +0200
9975 Socrates: added missed file with UPMA configuration data.
9977 Signed-of-by: Sergei Poselenov <sposelenov@emcraft.com>
9979 commit 59abd15b43cab7a4d19de4ba0943837d9555f7ba
9980 Author: Sergei Poselenov <sposelenov@emcraft.com>
9981 Date: Fri Jun 6 15:42:41 2008 +0200
9983 Socrates: Added FPGA mapping. LAWs and TLBs cleanup.
9985 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9987 commit 740280e68ccc0b971e613face7eaaa8bd1382b8c
9988 Author: Sergei Poselenov <sposelenov@emcraft.com>
9989 Date: Fri Jun 6 15:42:40 2008 +0200
9991 Added the upmconfig() function for 85xx.
9993 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
9994 Signed-off-by: Andy Fleming <afleming@freescale.com>
9996 commit d39e68514ff943930ee692cff3fde03532eb7fec
9997 Author: Sergei Poselenov <sposelenov@emcraft.com>
9998 Date: Fri Jun 6 15:42:39 2008 +0200
10000 Socrates: config file cleanup.
10002 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
10004 commit e8cc3f04b124f757af4528206e60d8eb715ae083
10005 Author: Wolfgang Grandegger <wg@grandegger.com>
10006 Date: Thu Jun 5 13:12:10 2008 +0200
10008 TQM85xx: Change memory map to support Flash memory > 128 MiB
10010 Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash
10011 memory. The current memory map only supports up to 128 MiB Flash.
10012 This patch adds the configuration option CONFIG_TQM_BIGFLASH. If
10013 set, up to 1 GiB flash is supported. To achieve this, the memory
10014 map has to be adjusted in great parts (for example the CCSRBAR is
10015 moved from 0xE0000000 to 0xA0000000).
10017 If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new
10018 memory map also has to be considered in the kernel (changed
10019 CCSRBAR address, changed PCI IO base address, ...). Please use
10020 an appropriate Flat Device Tree blob (tqm8548.dtb).
10022 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10023 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10025 commit 1c2deff22cd6e2bf0e618fd6e09ca3eec5a8d051
10026 Author: Wolfgang Grandegger <wg@grandegger.com>
10027 Date: Thu Jun 5 13:12:09 2008 +0200
10029 TQM85xx: NAND support via local bus UPMB
10031 This patch adds support for NAND FLASH on the TQM8548. It is disabled by
10032 default and can be enabled for the TQM8548 modules. It is now based on
10033 the re-written FSL NAND UPM driver. A patch has been posted earlier today
10036 "NAND FSL UPM: driver re-write using the hwcontrol callback"
10038 Note that the R/B pin is not supported by that module requiring to use
10039 the specified maximum delay time.
10041 Note: With NAND support enabled the size of the U-Boot image exceeds
10042 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk,
10043 doubling the image size :-(.
10045 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10046 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10048 commit b9e8078bb3f3c48111a7081e27279938c3a445e1
10049 Author: Wolfgang Grandegger <wg@grandegger.com>
10050 Date: Thu Jun 5 13:12:08 2008 +0200
10052 TQM8548: PCI express support
10054 This patch adds support for PCI express cards. The board support
10055 now uses common FSL PCI init code, for both, PCI and PCIe on all
10058 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10059 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10061 commit 1287e0c55a2ee2c575ac9ce8e4302cd4085be876
10062 Author: Wolfgang Grandegger <wg@grandegger.com>
10063 Date: Thu Jun 5 13:12:07 2008 +0200
10065 TQM8548: Basic support for the TQM8548 modules
10067 This patch adds basic support for the TQM8548 module from TQ-Components
10068 (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for
10071 Furthermore Flash buffer write has been enabled to speed up output to
10072 the Flash by approx. a factor of 10.
10074 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10075 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10077 commit 25991353204c78b094c3c1fec90182dcd607ab8f
10078 Author: Wolfgang Grandegger <wg@grandegger.com>
10079 Date: Thu Jun 5 13:12:06 2008 +0200
10081 TQM85xx: Support for Flat Device Tree
10083 This patch adds support for Linux kernels using the Flat Device Tree.
10084 It also re-defines the default environment settings for booting Linux
10087 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10089 commit d9ee843d54c54776e1fdb86336ce554906a87331
10090 Author: Wolfgang Grandegger <wg@grandegger.com>
10091 Date: Thu Jun 5 13:12:05 2008 +0200
10093 TQM85xx: Support for Intel 82527 compatible CAN controller
10095 This patch adds initialization of the UPMC RAM to support up to two
10096 Intel 82527 compatible CAN controller on the TQM85xx modules.
10098 Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de>
10099 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10101 commit 518d5cfe72916323c746af1647764459914f555f
10102 Author: Wolfgang Grandegger <wg@grandegger.com>
10103 Date: Thu Jun 5 13:12:04 2008 +0200
10105 TQM85xx: Bugfix in the SDRAM initialisation
10107 The CS0_BNDS register is now set according to the detected
10110 Signed-off-by Martin Krause <martin.krause@tqs.de>
10112 commit 45dee2e620ccec6ac7b3548fe8979a34fd030e5d
10113 Author: Wolfgang Grandegger <wg@grandegger.com>
10114 Date: Thu Jun 5 13:12:03 2008 +0200
10116 TQM85xx: Fix chip select configuration for second FLASH bank
10118 This patch fixes the re-calculation of the automatic chip select
10119 configuration for boards with two populated FLASH banks.
10121 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10123 commit 46346f27cda6fd025a496bde8f2d4aeee04aca5f
10124 Author: Wolfgang Grandegger <wg@grandegger.com>
10125 Date: Thu Jun 5 13:12:02 2008 +0200
10127 TQM85xx: Support for Spansion 'N' type flashes added
10129 The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors,
10130 than the formerly used 'M' types (S29GLxxxM series), so the flash layout
10131 needs to be changed -> new start address of the environment. The macro
10132 definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be
10133 defined for boards with 'N' type flashes.
10135 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10136 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10138 commit 5d5bd838f76eade22c0ea40a500389f924d0da36
10139 Author: Wolfgang Grandegger <wg@grandegger.com>
10140 Date: Thu Jun 5 13:12:01 2008 +0200
10142 TQM85xx: Fix CPM port pin configuration
10144 Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560
10145 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used
10146 as serial interface anyway. Worse, on some board variants configuring the
10147 pins for SCC1 leads to short circuits (for example on the TQM8541-BG).
10149 Signed-off-by: Martin Krause <martin.krause@tqs.de>
10151 commit b99ba1679e8cd51b023e67098c89e606e47137d2
10152 Author: Wolfgang Grandegger <wg@grandegger.com>
10153 Date: Thu Jun 5 13:12:00 2008 +0200
10155 TQM85xx: Various coding style fixes
10157 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10159 commit ae9e97fa96f643c8ba2b666b06a026cc8717eb00
10160 Author: Gerald Van Baren <vanbaren@cideas.com>
10161 Date: Tue Jun 10 22:15:58 2008 -0400
10163 libfdt: Move the working_fdt pointer to cmd_fdt.c
10165 The working_fdt pointer was declared in common/fdt_support.c but was
10166 not used there. Move it to common/cmd_fdt.c where it is used (it is
10167 also used in lib_ppc/bootm.c).
10169 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10171 commit e489b9c078e22b0d9e75f002cd2a1bd967e88f5e
10172 Author: Kim Phillips <kim.phillips@freescale.com>
10173 Date: Tue Jun 10 11:06:17 2008 -0500
10175 fdt: unshadow global working fdt variable
10177 differentiate with local variables of the same name by renaming the
10178 global 'fdt' variable 'working_fdt'.
10180 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10182 commit e1eb0e25d9d8fd8efdfb93f670a417663f386022
10183 Author: Andy Fleming <afleming@freescale.com>
10184 Date: Tue Jun 10 18:49:34 2008 -0500
10186 socrates: Fix PCI clk fix patch
10188 The submitted patch seems to have been more up-to-date, but an older patch was
10189 already in the repository. This patch encompasses the differences
10191 Taken entirely from Sergei Poselenov <sposelenov@emcraft.com>
10193 Signed-off-by: Andy Fleming <afleming@freescale.com>
10195 commit a75a57ef6e4b613c81434971e96ed70cf9ec9ba0
10196 Author: Wolfgang Grandegger <wg@grandegger.com>
10197 Date: Thu Jun 5 13:02:29 2008 +0200
10199 NAND FSL UPM: driver re-write using the hwcontrol callback
10201 This is a re-write of the NAND FSL UPM driver using the more universal
10202 hwcontrol callback (instead of the cmdfunc callback). Here is a brief
10203 list of furher modifications:
10205 - For the time being, the UPM setup writing the UPM array has been
10206 removed from the driver and must now be done by the board specific
10209 - The bus width definition in "struct fsl_upm_nand" is now in bits to
10210 comply with the corresponding Linux driver and 8, 16 and 32 bit
10211 accesses are supported.
10213 - chip->dev_read is only set if fun->dev_ready != NULL, which is
10214 required for boards not connecting the R/B pin.
10216 - A few issue have been fixed with MxMR bit manipulation like in the
10217 corresponding Linux driver.
10219 Note: I think the "io_addr" field of "struct fsl_upm" could be removed
10220 as well, because the address is already determined by
10221 "nand->IO_ADDR_[RW]", but I'm not 100% sure.
10223 This patch has been tested on a TQM8548 modules with the NAND chip
10224 Micron MT29F8G08FABWP.
10226 This patch is based on the following patches posted to this list a few
10229 PPC: add accessor macros to clear and set bits in one shot
10230 83xx/85xx/86xx: add more MxMR local bus definitions
10232 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10233 Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10235 commit 6beecfbb542992eede5831240cd58678274683a9
10236 Author: Wolfgang Grandegger <wg@grandegger.com>
10237 Date: Thu Jun 5 13:11:59 2008 +0200
10239 MPC85xx: Beautify boot output of L2 cache configuration
10241 The boot output is now aligned poperly with other boot output
10247 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10249 commit 398415114f0a705163a14543e9fef03f734b1ffa
10250 Author: Wolfgang Grandegger <wg@grandegger.com>
10251 Date: Wed Jun 4 12:45:22 2008 +0200
10253 PPC: add accessor macros to clear and set bits in one shot
10255 PPC: add accessor macros to clear and set bits in one shot
10257 This patch adds macros from linux/include/asm-powerpc/io.h to clear and
10258 set bits in one shot using the in_be32, out_be32, etc. accessor functions.
10259 They are very handy to manipulate bits it I/O registers.
10261 This patch is required for my forthcoming FSL NAND UPM driver re-write and
10262 the support for the TQM8548 module.
10264 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10266 commit 4677988c7edc070c3786d3db7994abeca3ab82a0
10267 Author: Wolfgang Grandegger <wg@grandegger.com>
10268 Date: Wed Jun 4 13:52:17 2008 +0200
10270 TQM: move TQM boards to board/tqc
10272 Move all TQM board directories to the vendor specific directory "tqc"
10273 for modules from TQ-Components GmbH (http://www.tqc.de).
10275 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10277 commit 6fab2fe72ca5bf95280cd52cdf378af3e506eb50
10278 Author: Wolfgang Grandegger <wg@grandegger.com>
10279 Date: Mon Jun 2 12:09:30 2008 +0200
10281 83xx/85xx/86xx: add more MxMR local bus definitions
10283 83xx/85xx/86xx: add more MxMR local bus definitions
10285 This patch adds more macro definitions for the UPM Machine Mode Registers
10286 They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx
10287 common local bus definitions into include/asm-ppc/fsl_lbc.h. They are
10288 required for my forthcoming FSL NAND UPM driver re-write and the support
10289 for the TQM8548 module.
10291 This patch is based on the following two patches from Anton Vorontsov:
10293 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html
10294 http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html
10296 I leave coding style violation fixes, code beautification and name
10297 corrections to somebody else ;-(.
10299 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
10301 commit c8c5fc266e4499e283c293ccb972863156aa4134
10302 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10303 Date: Thu May 29 18:14:56 2008 +0400
10305 83xx/85xx: further localbus cleanups
10307 Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names
10308 from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2.
10310 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10312 commit 42dbd667c88d496882d53e22656e89b654205492
10313 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10314 Date: Wed May 28 18:20:15 2008 +0400
10316 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
10318 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
10319 use it on MPC85xx and MPC86xx processors.
10321 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10323 commit 730b2fcf6fcd9eec3ea86fbb087c3f98aa23a769
10324 Author: Kumar Gala <galak@kernel.crashing.org>
10325 Date: Thu May 29 11:22:06 2008 -0500
10327 85xx: Add setting of cache props in the device tree.
10329 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10331 commit 4dbdb7681e243431530df0725627192a0c4aefda
10332 Author: Kumar Gala <galak@kernel.crashing.org>
10333 Date: Tue Jun 10 16:53:46 2008 -0500
10335 85xx: expose cpu identification
10337 The current cpu identification code is used just to return the name
10338 of the processor at boot. There are some other locations that the name
10339 is useful (device tree setup). Expose the functionality to other bits
10342 Also, drop the 'E' suffix and add it on by looking at the SVR version
10343 when we print this out. This is mainly to allow the most flexible use
10344 of the name. The device tree code tends to not care about the 'E' suffix.
10346 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10348 commit 2329fe113d847e43cca8e4a0e4edd613b50b8492
10349 Author: Kim Phillips <kim.phillips@freescale.com>
10350 Date: Tue Jun 10 13:25:24 2008 -0500
10352 mpc83xx: MVBLM7: minor build fixups
10354 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10356 commit a1293e549b56da135ef32ffca5b9d35a16aa6802
10357 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
10358 Date: Tue Jun 10 09:14:05 2008 +0200
10360 add MPC8343 based board mvBlueLYNX-M7 (board+make files)
10362 Add MPC8343 based board mvBlueLYNX-M7.
10363 It's a single board stereo camera system.
10364 Please read doc/README.mvblm7 for details.
10366 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
10367 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10369 commit c005b93925ba49f07da2aa748527996d927e172f
10370 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
10371 Date: Tue Jun 10 09:13:16 2008 +0200
10373 add MPC8343 based board mvBlueLYNX-M7 (doc+config)
10375 Add MPC8343 based board mvBlueLYNX-M7.
10376 It's a single board stereo camera system.
10377 Please read doc/README.mvblm7 for details.
10379 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
10380 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10382 commit f9023afbdfd9f27e7c38f3cce965746e56d62dd3
10383 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10384 Date: Thu May 29 18:14:56 2008 +0400
10386 83xx/85xx: further localbus cleanups
10388 move the BRx_* and ORx_* left behind in mpc85xx.h
10390 The same is needed for mpc8xx.h and mpc8260.h (defines are almost
10391 the same, just few differences which needs some attention though).
10393 But the bad news for mpc8xx and mpc8260 is that there are a lot of users
10394 of these defines. So this cleanup I'll leave for the "better times".
10396 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10397 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10399 commit bf30bb1f7c954d7855d9b23624b33b00c50b4697
10400 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
10401 Date: Wed May 28 18:20:15 2008 +0400
10403 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.h
10405 This patch moves Freescale Localbus defines out of mpc83xx.h, so we could
10406 use it on MPC85xx and MPC86xx processors.
10408 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
10409 Acked-by: Andy Fleming <afleming@freescale.com>
10410 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10412 commit d82b4fc0ce8cca95e857fc51022e841cb2dbee6a
10413 Author: Tor Krill <tor@excito.com>
10414 Date: Mon Jun 2 15:09:30 2008 +0200
10416 Add missing CSCONFIG_BANK_BIT_3 define to mpc83xx.h
10418 Signed-off-by: Tor Krill <tor@excito.com>
10419 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
10421 commit 3b904ccb93c3196727e2e9870cb1df903cab19ad
10422 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10423 Date: Mon Jun 9 23:37:44 2008 +0900
10425 net: Conditional COBJS inclusion of network drivers
10427 Replace COBJS-y with appropriate driver config names.
10429 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10430 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10432 commit 2fb698bf50f4aff2485581a12fa634a07c040e4a
10433 Author: Gerald Van Baren <vanbaren@cideas.com>
10434 Date: Mon Jun 9 21:02:17 2008 -0400
10436 Use strncmp() for the fdt command
10438 Cleaner than doing multiple conditionals on characters.
10440 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10442 commit 47abe8ab290d2721a8eeadff65b939e6af8c01b0
10443 Author: Gerald Van Baren <vanbaren@cideas.com>
10444 Date: Sat Jun 7 12:25:05 2008 -0400
10446 The fdt boardsetup command criteria was not unique
10448 It was checking just for "b", which is not unique with respect to the
10449 "boot" command. Change to check for "boa"[rdsetup].
10451 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10453 commit 2f08bfa9526bae4f461e043530cfb903fec0d273
10454 Author: David Gibson <david@gibson.dropbear.id.au>
10455 Date: Tue May 20 17:19:11 2008 +1000
10457 libfdt: Several cleanups to parameter checking
10459 This patch makes a couple of small cleanups to parameter checking of
10462 - In several functions which take a node offset, we use an
10463 idiom involving fdt_next_tag() first to check that we have indeed been
10464 given a node offset. This patch adds a helper function
10465 _fdt_check_node_offset() to encapsulate this usage of fdt_next_tag().
10467 - In fdt_rw.c in several places we have the expanded version
10468 of the RW_CHECK_HEADER() macro for no particular reason. This patch
10469 replaces those instances with an invocation of the macro; that's what
10472 - In fdt_sw.c we rename the check_header_sw() function to
10473 sw_check_header() to match the analgous function in fdt_rw.c, and we
10474 provide an SW_CHECK_HEADER() wrapper macro as RW_CHECK_HEADER()
10475 functions in fdt_rw.c
10477 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
10479 commit fec6d9ee7c10443f65ce1788ef818919167bbf2e
10480 Author: Gerald Van Baren <vanbaren@cideas.com>
10481 Date: Tue Jun 3 20:34:45 2008 -0400
10483 Remove the deprecated CONFIG_OF_FLAT_TREE
10485 Use CONFIG_OF_LIBFDT instead to support flattened device trees. It is
10486 cleaner, has better functionality, and is better supported.
10488 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10490 commit 62bcdda293efa752f8281fbd9da03822b27ce82f
10491 Author: Gerald Van Baren <vanbaren@cideas.com>
10492 Date: Tue Jun 3 20:26:29 2008 -0400
10494 Change the stxxst to CONFIG_OF_LIBFDT
10496 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
10497 to CONFIG_OF_LIBFDT.
10499 WARNING: It appears that this board lost its ability to boot via a
10500 flattened device tree prior to this changeset.
10502 WARNING: This conversion was untested because I do not have a board to
10505 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10507 commit 589c04271d129729a8b01391453851ab9cc4069c
10508 Author: Gerald Van Baren <vanbaren@cideas.com>
10509 Date: Tue Jun 3 20:24:58 2008 -0400
10511 Convert mpc7448hpc2 to CONFIG_OF_LIBFDT
10513 This was configured to use the deprecated CONFIG_OF_FLAT_TREE, change
10514 to CONFIG_OF_LIBFDT.
10516 WARNING: This conversion is untested because I do not have a board to
10519 NOTE: The FDT blob (DTS) must have an /aliases/ethernet0 and (optionally)
10520 /aliases/ethernet1 property for the ethernet to work.
10522 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
10524 commit ee1e35bede91debc8bff9b02f75574486033b652
10525 Author: Kumar Gala <galak@kernel.crashing.org>
10526 Date: Thu May 29 01:21:24 2008 -0500
10528 85xx: Only use PORPLLSR[DDR_Ratio] on platforms that define it
10530 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
10532 commit 3b9519fc50802436e417c839e69df7b2016cade5
10533 Author: Becky Bruce <becky.bruce@freescale.com>
10534 Date: Wed May 14 13:10:04 2008 -0500
10536 MPC85xx: Change traps.c to not reference non-addressable memory
10538 Currently, END_OF_RAM is used by the trap code to determine if
10539 we should attempt to access the stack pointer or not. However,
10540 on systems with a lot of RAM, only a subset of the RAM is
10541 guaranteed to be mapped in and accessible. Change END_OF_RAM
10542 to use get_effective_memsize() instead of using the raw ram
10543 size out of the bd.
10545 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10547 commit 7faddaecea52f585f538fdf9c2e61f85a789b19c
10548 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10549 Date: Mon Jun 9 13:39:57 2008 +0900
10551 sh: Renesas Solutions SH7763RDP board support
10553 SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC.
10554 In this patch, support SCIF, NOR Flash, and Ethernet.
10556 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10557 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10559 commit 60179098a95eaa972007d7ec58e4c1588029720f
10560 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10561 Date: Fri Jun 6 16:24:13 2008 +0900
10563 sh: Add support Renesas SH7763
10565 Renesas SH7763 has 3 SCIF, MMC, LCDC, Ethernet and other.
10566 This patch supprts CPU register's header file.
10568 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10569 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10571 commit 08c5fabe181d663eec0feba5ecd02c0b78934a52
10572 Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10573 Date: Fri Jun 6 16:16:08 2008 +0900
10575 sh: SH7763 SCIF support
10577 SH7763 has 3 SCIF channels. SCIF0 and 1 are same register constitution,
10578 but only SCIF2 is different. This patch work all SCIF channel.
10580 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
10581 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
10583 commit 79b51ff8205f0354d5300570614c1d2db499679c
10584 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10585 Date: Sat Jun 7 20:51:59 2008 +0900
10587 [MIPS] cpu/mips/Makefile: Split [CS]OBJS onto separate lines
10589 Also get rid of some #ifdefs in *.c files.
10591 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10593 commit 8bde63eb3f79d68f693201528dafc8ae7aa087de
10594 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10595 Date: Sat Jun 7 20:51:56 2008 +0900
10597 [MIPS] Rename Alchemy processor configs into CONFIG_SOC_*
10601 Common Alchemy Au1x00 stuff. All Alchemy processor based machines
10602 need to have this config as a system type specifier.
10604 CONFIG_SOC_AU1000, CONFIG_SOC_AU1100, CONFIG_SOC_AU1200,
10605 CONFIG_SOC_AU1500, CONFIG_SOC_AU1550
10607 Machine type specifiers. Each port should have one of aboves.
10609 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10611 commit cc49cadeeb8bb2f0ae3fdc13af7051ae59f083bc
10612 Author: Stuart Wood <stuart.wood@labxtechnologies.com>
10613 Date: Fri May 30 16:05:28 2008 -0400
10615 env_nand.c: Added bad block management for environment variables
10617 Modified to check for bad blocks and to skipping over them when
10618 CFG_ENV_RANGE has been defined.
10619 CFG_ENV_RANGE must be larger than CFG_ENV_SIZE and aligned to the NAND
10622 Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>
10623 Signed-off-by: Scott Wood <scottwood@freescale.com>
10625 commit 279726bd00558e80263d44581c44167625b7fb9a
10626 Author: Becky Bruce <becky.bruce@freescale.com>
10627 Date: Wed May 14 13:09:58 2008 -0500
10629 MPC86xx: Change traps.c to not reference non-addressable memory
10631 Currently, END_OF_RAM is used by the trap code to determine if
10632 we should attempt to access the stack pointer or not. However,
10633 on systems with a lot of RAM, only a subset of the RAM is
10634 guaranteed to be mapped in and accessible. Change END_OF_RAM
10635 to use get_effective_memsize() instead of using the raw ram
10636 size out of the bd to prevent us from trying to access
10639 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
10641 commit 338cc038461a6c7709c5b86fd9a240209338a1ae
10642 Author: Wolfgang Denk <wd@denx.de>
10643 Date: Fri Jun 6 14:28:14 2008 +0200
10645 tools/mkimage: fix compiler warnings on some systems.
10647 Signed-off-by: Wolfgang Denk <wd@denx.de>
10649 commit b2815f79288d4da7a3ba18bdbd05120ce09d5622
10650 Author: Stefan Roese <sr@denx.de>
10651 Date: Fri Jun 6 16:10:41 2008 +0200
10653 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
10655 We use upper case letters for the AMCC processor defines (like
10656 CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
10657 not CONFIG_440SPe. This patch fixes the last misspelled config options.
10659 Signed-off-by: Stefan Roese <sr@denx.de>
10661 commit 72675dc6c06a48846d180106161d49dd714383cc
10662 Author: Stefan Roese <sr@denx.de>
10663 Date: Fri Jun 6 15:55:21 2008 +0200
10665 ppc4xx: Unify AMCC's board config files (part 3/3)
10667 This patch series unifies the AMCC eval board ports by introducing
10668 a common include header for all AMCC eval boards:
10670 include/configs/amcc-common.h
10672 This header now includes all common configuration options/defines which
10673 are removed from the board specific headers.
10675 The reason for this is ease of maintenance and unified look and feel
10676 of all AMCC boards.
10678 Signed-off-by: Stefan Roese <sr@denx.de>
10680 commit 490f204096d6e2c9940f67816f154a8125bab116
10681 Author: Stefan Roese <sr@denx.de>
10682 Date: Fri Jun 6 15:55:03 2008 +0200
10684 ppc4xx: Unify AMCC's board config files (part 2/3)
10686 This patch series unifies the AMCC eval board ports by introducing
10687 a common include header for all AMCC eval boards:
10689 include/configs/amcc-common.h
10691 This header now includes all common configuration options/defines which
10692 are removed from the board specific headers.
10694 The reason for this is ease of maintenance and unified look and feel
10695 of all AMCC boards.
10697 Signed-off-by: Stefan Roese <sr@denx.de>
10699 commit a8a11a9ed046b480a16e47a158f8f5300028dfa6
10700 Author: Stefan Roese <sr@denx.de>
10701 Date: Fri Jun 6 15:54:31 2008 +0200
10703 ppc4xx: Unify AMCC's board config files (part 1/3)
10705 This patch series unifies the AMCC eval board ports by introducing
10706 a common include header for all AMCC eval boards:
10708 include/configs/amcc-common.h
10710 This header now includes all common configuration options/defines which
10711 are removed from the board specific headers.
10713 The reason for this is ease of maintenance and unified look and feel
10714 of all AMCC boards.
10716 Signed-off-by: Stefan Roese <sr@denx.de>
10718 commit 0e38c938ed4bcadb4f4fc1419a541431e94fc202
10719 Author: Remy Bohmer <linux@bohmer.net>
10720 Date: Thu Jun 5 13:03:36 2008 +0200
10722 DM9000 fix status check fail 0x6d error for trizeps board
10724 According to the Application Notes of the DM9000, only the 2 bits 0:1 of
10725 the status byte need to be checked to identify a valid packet in the fifo
10727 But, The several different Application Notes do not all speak the same
10728 language on these bits. They do not disagree, but only 1 Application Note
10729 noted explicitly that only these 2 bits need to be checked.
10730 Even the datasheets do not mention anything about these 2 bits.
10732 Because the old code, and the kernel check the whole byte, I left this piece
10735 However, I tested all board/DM9000[A|E|EP] devices with this 2 bit check, so
10738 Notice, that the 2nd iteration through this receive loop (when a 2nd packet is
10739 in the fifo) is much shorter now, compared to the older U-boot driver code,
10740 so that we can maybe run into a hardware condition now that was never seen
10741 before, or maybe was seen very unfrequently.
10743 Additionaly added a cleanup of a stack variable.
10745 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10746 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10748 commit 7daf2ebe9196dd67131a06d85049c3a8a08ca413
10749 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10750 Date: Thu Jun 5 22:29:00 2008 +0900
10752 [MIPS] Update <asm/addrspace.h> header
10754 - Fix traditional KSEG names
10755 - Replace PHYSADDR with CPHYSADDR
10757 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10759 commit f0d5a6f060d00358b85c62a921a423ea8df71184
10760 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10761 Date: Thu Jun 5 22:29:00 2008 +0900
10763 [MIPS] mips_config.mk: Misc fixes
10765 - Kill redundant `-pipe' (this will be added by $(TOPDIR)/config.mk)
10768 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10770 commit 5f64d21c9a2998794f255b469165b91f092dfc2d
10771 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10772 Date: Thu Jun 5 22:29:00 2008 +0900
10774 [MIPS] Kill unused <version.h> inclusions
10776 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10778 commit a55d48174cfd1a5bc184159513f48dcbbe409c83
10779 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10780 Date: Thu Jun 5 22:29:00 2008 +0900
10782 [MIPS] lib_mips/time.c: Fix CP0 count register usage and timer routines
10784 MIPS port has two problems in timer routines. One is now we assume CFG_HZ
10785 equals to CP0 counter frequency, but this is wrong. CFG_HZ has to be 1000
10786 in the U-Boot system.
10788 The other is we don't have a proper time management counter like timestamp
10789 other ARCHs have. We need the 32-bit millisecond clock counter.
10791 This patch introduces timestamp and CYCLES_PER_JIFFY. timestamp is a
10792 32-bit non-overflowing CFG_HZ counter, and CYCLES_PER_JIFFY is the number
10793 of calculated CP0 counter cycles in a CFG_HZ.
10797 * Fix improper CFG_HZ value to have 1000
10799 * Use CFG_MIPS_TIMER_FREQ for timer counter frequency, instead.
10801 * timer_init: initialize timestamp and set up the first timer expiration.
10802 Note that we don't need to initialize CP0 count/compare registers here
10803 as they have been already zeroed out on the system reset. Leave them as
10806 * get_timer: calculate how many timestamps have been passed, then return
10807 base-relative timestamp. Make sure we can easily count missed timestamps
10808 regardless of CP0 count/compare value.
10810 * get_ticks: return the current timestamp, that is get_timer(0).
10812 Most parts are from good old Linux v2.6.16 kernel.
10815 - Remove FIXME comments as they turned out to be trivial.
10816 - Use CP0 compare register as a global variable for expirelo.
10817 - Kill a global variable 'cycles_per_jiffy'. Use #define CYCLES_PER_JIFFY
10820 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10822 commit 199e4f657c8af42efe3fb3ba1d1104eb6bb28c25
10823 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10824 Date: Thu Jun 5 22:29:00 2008 +0900
10826 [MIPS] lib_mips/time.c: Fix udelay
10828 What we have to do is just to wait for given micro-seconds. No need to
10829 take into account current time, get_timer and CFG_HZ.
10831 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10833 commit c7e38e413ae69120d3e51f132c7cb1d6b3514d03
10834 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10835 Date: Thu Jun 5 22:28:59 2008 +0900
10837 [MIPS] lib_mips/time.c: Replace CP0 access functions with existing macros
10839 We already have many pre-defined CP0 access macros in <asm/mipsregs.h>.
10840 This patch replaces mips_{compare,count}_set and mips_count_get with
10843 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
10845 commit 6b52cfe16cd539935e32bd8cf19146522e462a4d
10846 Author: Remy Bohmer <linux@bohmer.net>
10847 Date: Tue Jun 3 15:48:17 2008 +0200
10849 Get rid of annoying/superfluous bad-checksum warning message
10851 U-boot can complain a lot about 'checksum bad' when it is attached to the network.
10852 It is annoying for ordinary users who start to doubt the network connection
10853 in general when they see messages like this.
10855 This is caused by the routine NetCksumOk() which cannot handle IP-headers longer
10856 than 20 bytes. Those packages can be ignored anyway by U-boot, so we trash them
10857 now before checking the checksum.
10859 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10860 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10862 commit d6ee5fa40c26970d39990c6fc4a2f20a97822650
10863 Author: Remy Bohmer <linux@bohmer.net>
10864 Date: Wed Jun 4 10:47:25 2008 +0200
10866 Fix order for reading rx-status registers in 32bit mode of DM9000
10868 A last minute cleanup before submitting the DM9000A patch series yesterday introduced
10869 a bug in reading the rx-status registers in 32bit mode only.
10870 This patch repairs this.
10872 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10873 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10875 commit 98291e2e689096420465074cce926b226d2e71b4
10876 Author: Remy Bohmer <linux@bohmer.net>
10877 Date: Tue Jun 3 15:26:26 2008 +0200
10879 DM9000: Some minor code cleanups
10881 Some lines of the U-boot DM9000x driver are longer than 80 characters, or
10882 need some other minor cleanup.
10884 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10885 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10887 commit 850ba7555dbd4ca8d14fc475b864d534797adab3
10888 Author: Remy Bohmer <linux@bohmer.net>
10889 Date: Tue Jun 3 15:26:25 2008 +0200
10891 DM9000: Make driver work properly for DM9000A
10893 The DM9000A network controller does not work with the U-boot DM9000x driver.
10894 Analysis showed that many incoming packets are lost.
10896 The DM9000A Application Notes V1.20 (section 5.6.1) recommend that the poll to
10897 check for a valid rx packet be done on the interrupt status register, not
10898 directly by performing the dummy read and the rx status check as is currently
10899 the case in the u-boot driver.
10901 When the recommended poll is done as suggested the driver starts working
10902 correctly on 10Mbit/HD, but on 100MBit/FD packets come in faster so that there
10903 can be more than 1 package in the fifo at the same time.
10905 The driver must perform the rx-status check in a loop and read and handle all
10906 packages until there is no more left _after_ the interrupt RX flag is set.
10908 This change has been tested with DM9000A, DM9000E, DM9000EP.
10910 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10911 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10913 commit fbcb7ece0ea1e364180f1cf963e0fa0ce7f6560d
10914 Author: Remy Bohmer <linux@bohmer.net>
10915 Date: Tue Jun 3 15:26:24 2008 +0200
10917 DM9000: Improve eth_reset() routine
10919 According to the application notes of the DM9000 v1.22 chapter 5.2 bullet 2, the
10920 reset procedure must be done twice to properly reset the DM9000 by means of software.
10921 This errata is not needed anymore for the DM9000A, but it does not bother it.
10923 This change has been tested with DM9000A, DM9000E, DM9000EP.
10925 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10926 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10928 commit acba31847fad9ae40708cc2c9f3a634ec35f3416
10929 Author: Remy Bohmer <linux@bohmer.net>
10930 Date: Tue Jun 3 15:26:23 2008 +0200
10932 DM9000: improve eth_send() routine
10934 The eth_send routine of the U-boot DM9000x driver does not match the
10935 DM9000 or DM9000A application notes/programming guides.
10937 This change improves the stability of the DM9000A network controller.
10939 This change has been tested with DM9000A, DM9000E, DM9000EP.
10941 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10942 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10944 commit 134e266253c02a7832560da59d394989c4f64453
10945 Author: Remy Bohmer <linux@bohmer.net>
10946 Date: Tue Jun 3 15:26:22 2008 +0200
10948 DM9000: repair debug logging
10950 It seems that the debugging code of the DM9000x driver in U-boot has not been
10951 compiled for a long time, because it cannot compile...
10953 Also rearranged some loglines to get more useful info while debugging.
10955 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10956 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10958 commit a101361bfe23c120321e45d114c0603b8e0763e9
10959 Author: Remy Bohmer <linux@bohmer.net>
10960 Date: Tue Jun 3 15:26:21 2008 +0200
10962 DM9000: Add data bus-width auto detection.
10964 The U-boot DM9000x driver contains a compile time bus-width definition for
10965 the databus connected to the network controller.
10967 This compile check makes the code unclear, inflexible and is unneccessary.
10968 It can be asked to the network controller what its bus-width is by reading bits
10969 6 and 7 of the interrupt status register.
10971 The linux kernel already uses a runtime mechanism to determine this bus-width,
10972 so the implementation below looks somewhat like that implementation.
10974 This change has been tested with DM9000A, DM9000E, DM9000EP.
10976 Signed-off-by: Remy Bohmer <linux@bohmer.net>
10977 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
10979 commit 63a0afa0c32e5f4ea98a9439542870072437404d
10980 Author: Stefan Roese <sr@denx.de>
10981 Date: Wed Jun 4 19:19:20 2008 +0200
10983 ppc4xx: Fix problem with SDRAM init in bamboo NAND booting port
10985 This patch fixes a problem spotted by Eugene O'Brian (thanks Eugene)
10986 introduced by the commit:
10988 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
10990 With this patch SDRAM will get initialized again and booting from NAND
10993 Signed-off-by: Stefan Roese <sr@denx.de>
10994 Acked-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
10996 commit 9ef1cbef1a649e3779298b0e663be4865cbbbfbc
10997 Author: Wolfgang Denk <wd@denx.de>
10998 Date: Tue May 27 14:19:30 2008 +0200
11000 Socrates: Fix PCI bus frequency report
11002 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
11004 commit 8ec6e332eace0ee78c71ee5f645d12b06813b86f
11005 Author: Tor Krill <tor@excito.com>
11006 Date: Thu May 29 11:10:30 2008 +0200
11008 Fix incorrect switch for IF_TYPE in part.c
11010 Use correct field in block_dev_desc_t when writing interface type in
11011 dev_print. Error introduced in 574b3195.
11013 Also added fix from Martin Krause
11015 Signed-off-by: Tor Krill <tor@excito.com>
11017 commit b64b8a0bd310935b70af69ac970952f2b364ae56
11018 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
11019 Date: Tue May 27 10:25:39 2008 +0200
11021 Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.
11023 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
11025 commit 35ef877f0a8f6232cdef748f442fed5accb2b641
11026 Author: Peter Tyser <ptyser@xes-inc.com>
11027 Date: Thu May 22 18:56:52 2008 -0500
11029 Additional fix to readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
11031 Removed unneeded command line history initialization. Also, the original
11032 code would access the 'initted' variable before relocation to SDRAM
11033 which resulted in erratic behavior since the bss is not initialized when
11034 executing from flash.
11036 Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
11038 commit 22f371b63038a4ecab04068877c1089e51a01ba1
11039 Author: Grant Erickson <gerickson@nuovations.com>
11040 Date: Wed May 21 13:28:30 2008 -0700
11042 PPC4xx: Simplified post_word_{load, store}
11044 This patch simplifies post_word_{load,store} by using the preprocessor
11045 to eliminate redundant, copy-and-pasted code.
11047 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11049 commit 9c048b523413ae5f3ff34e00cf57569c3368ab51
11050 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
11051 Date: Wed May 7 21:25:33 2008 +0400
11053 cfi_flash: enable M18 flash chips family support.
11055 Added new command set ID. Buffered write command processing is changed
11056 in order to support M18 flash chips family.
11058 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
11059 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
11061 commit 93c56f212ccdadc182018f0769cb284426b88f1d
11062 Author: Vasiliy Leoenenko <vasiliy.leonenko@mail.ru>
11063 Date: Wed May 7 21:24:44 2008 +0400
11065 cfi_flash: support of long cmd in U-boot.
11067 Some NOR flash chips needs support of commands with length grether than max
11068 value size of uchar. For example all M18 family chips use 0x1ff command in
11069 buffered write mode as value of program loops count.
11071 Signed-off-by: Alexey Korolev <akorolev@infradead.org>
11072 Signed-off-by: Vasiliy Leonenko <vasiliy.leonenko@mail.ru>
11074 commit 4d91d1df2f16b511ab80dec50c80e050ba0d841e
11075 Author: Stefan Roese <sr@denx.de>
11076 Date: Fri May 16 11:06:06 2008 +0200
11078 DTT: Issue one-shot command on AD7414 (LM75 code) to read temp
11080 On AD7414 the first value upon bootup is not read correctly.
11081 This is most likely because of the 800ms update time of the
11082 temp register in normal update mode. To get current values
11083 each time we issue the "dtt" command including upon powerup
11084 we switch into one-short mode.
11086 This patch fixes the problem on AD7414 equipped boards (Sequoia,
11087 Canyonlands etc), that temp value printed in the bootup log was
11090 Signed-off-by: Stefan Roese <sr@denx.de>
11092 commit de5bfcf7b0425e032be12698252dbaa6b65a28c0
11093 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11094 Date: Fri May 30 16:55:06 2008 +0200
11096 ppc4xx: Cleanup CPCI405 variant's config file
11098 This patch removes some dead code from CPCI405 board's
11099 config files. JFFS2 support is also removed. It's not used and
11100 CPCI4052 does not build anymore without some size reduction.
11102 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
11104 commit 2918eb9d42bc705fcbd18c9fcc39d15ff2843c65
11105 Author: Kenneth Johansson <kenneth@southpole.se>
11106 Date: Thu May 29 16:32:33 2008 +0200
11108 Remove shell variable UNDEF_SYM.
11110 UNDEF_SYM is a shell variable in the main Makefile used to force the
11111 linker to add all u-boot commands to the final image. It has no use here.
11113 Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
11115 commit 8c66497e06bf803489c589df58ee591d71033274
11116 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11117 Date: Fri May 16 11:10:35 2008 +0200
11119 Add support for environment in SPI flash
11121 This is pretty incomplete...it doesn't handle reading the environment
11122 before relocation, it doesn't support redundant environment, and it
11123 doesn't support embedded environment. But apart from that, it does
11126 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11128 commit b6368467e6a97f225e0a5fd7bfc5c7598ef5ddc4
11129 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11130 Date: Fri May 16 11:10:34 2008 +0200
11132 SPI Flash: Add "sf" command
11134 This adds a new command, "sf" which can be used to manipulate SPI
11135 flash. Currently, initialization, reading, writing and erasing is
11138 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11140 commit d25ce7d24cc0f93881559f4009175ea305af65e8
11141 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11142 Date: Fri May 16 11:10:33 2008 +0200
11144 SPI Flash subsystem
11146 This adds a new SPI flash subsystem.
11148 Currently, only AT45 DataFlash in non-power-of-two mode is supported,
11149 but some preliminary support for other flash types is in place as
11152 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11154 commit 60445cb5c3eb77ed1a07f2d908eef09174483698
11155 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
11156 Date: Fri May 16 11:10:32 2008 +0200
11158 atmel_spi: Driver for the Atmel SPI controller
11160 This adds a driver for the SPI controller found on most AT91 and AVR32
11161 chips, implementing the new SPI API.
11164 - Update to new API
11165 - Handle zero-length transfers appropriately. The user may send a
11166 zero-length SPI transfer with SPI_XFER_END set in order to
11167 deactivate the chip select after a series of transfers with chip
11168 select active. This is useful e.g. when polling the status
11169 register of DataFlash.
11171 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11173 commit d255bb0e78d1cac5b7c8c98cb77a095f5f16de0d
11174 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
11175 Date: Fri May 16 11:10:31 2008 +0200
11177 SPI API improvements
11179 This patch gets rid of the spi_chipsel table and adds a handful of new
11180 functions that makes the SPI layer cleaner and more flexible.
11182 Instead of the spi_chipsel table, each board that wants to use SPI
11183 gets to implement three hooks:
11184 * spi_cs_activate(): Activates the chipselect for a given slave
11185 * spi_cs_deactivate(): Deactivates the chipselect for a given slave
11186 * spi_cs_is_valid(): Determines if the given bus/chipselect
11187 combination can be activated.
11189 Not all drivers may need those extra functions however. If that's the
11190 case, the board code may just leave them out (assuming they know what
11191 the driver needs) or rely on the linker to strip them out (assuming
11192 --gc-sections is being used.)
11194 To set up communication parameters for a given slave, the driver needs
11195 to call spi_setup_slave(). This returns a pointer to an opaque
11196 spi_slave struct which must be passed as a parameter to subsequent SPI
11197 calls. This struct can be freed by calling spi_free_slave(), but most
11198 driver probably don't want to do this.
11200 Before starting one or more SPI transfers, the driver must call
11201 spi_claim_bus() to gain exclusive access to the SPI bus and initialize
11202 the hardware. When all transfers are done, the driver must call
11203 spi_release_bus() to make the bus available to others, and possibly
11204 shut down the SPI controller hardware.
11206 spi_xfer() behaves mostly the same as before, but it now takes a
11207 spi_slave parameter instead of a spi_chipsel function pointer. It also
11208 got a new parameter, flags, which is used to specify chip select
11209 behaviour. This may be extended with other flags in the future.
11211 This patch has been build-tested on all powerpc and arm boards
11212 involved. I have not tested NIOS since I don't have a toolchain for it
11213 installed, so I expect some breakage there even though I've tried
11214 fixing up everything I could find by visual inspection.
11216 I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and
11217 DataFlash drivers posted as a follow-up. I'd like some help testing
11218 other boards that use the existing SPI API.
11220 But most of all, I'd like some comments on the new API. Is this stuff
11221 usable for everyone? If not, why?
11224 - Build fixes for various boards, drivers and commands
11225 - Provide common struct spi_slave definition that can be extended by
11227 - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate
11228 - Make default bus and mode build-time configurable
11229 - Override default SPI bus ID and mode on mx32ads and imx31_litekit.
11232 - Add opaque struct spi_slave for controller-specific data associated
11234 - Add spi_claim_bus() and spi_release_bus()
11235 - Add spi_free_slave()
11236 - spi_setup() is now called spi_setup_slave() and returns a
11238 - soft_spi now supports four SPI modes (CPOL|CPHA)
11239 - Add bus parameter to spi_setup_slave()
11240 - Convert the new i.MX32 SPI driver
11241 - Convert the new MC13783 RTC driver
11244 - Convert the mpc8xxx_spi driver and the mpc8349emds board to the
11247 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
11248 Tested-by: Guennadi Liakhovetski <lg@denx.de>
11250 commit 289011207d999b2e4085150d2aa30d547ad9b800
11251 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11252 Date: Fri May 16 11:10:30 2008 +0200
11254 Move definition of container_of() to common.h
11256 AVR32 and AT91SAM9 both have their own identical definitions of
11257 container_of() taken from the Linux kernel. Move it to common.h so
11258 that all architectures can use it.
11260 container_of() is already used by some drivers, and will be used
11261 extensively by the new and improved SPI API.
11263 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11265 commit 110e006fe67fb4a6e1719ae6956c79b7ffc0148b
11266 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11267 Date: Fri May 16 11:08:11 2008 +0200
11269 soft_i2c: Pull SDA high before reading
11271 Spotted by Dean Capindale.
11273 Systems that support open-drain GPIO properly are allowed provide an
11274 empty I2C_TRISTATE define. However, this means that we need to be
11275 careful not to drive SDA low when the slave is expected to respond.
11277 This patch adds a missing I2C_SDA(1) to read_byte() required to
11278 tristate the SDA line on systems that support open-drain GPIO.
11280 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11282 commit 3c1de1a6d36be9eee284a6c596a86e94f19cc5b2
11283 Author: Stefan Roese <sr@denx.de>
11284 Date: Mon May 19 11:34:53 2008 +0200
11286 ppc4xx: Remove implementations of testdram()
11288 This patch removes the used testdram() implementations of the board
11289 that are maintained by myself.
11291 Signed-off-by: Stefan Roese <sr@denx.de>
11293 commit bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a
11294 Author: Stefan Roese <sr@denx.de>
11295 Date: Mon Jun 2 17:37:28 2008 +0200
11297 ppc4xx: Remove superfluous dram_init() call or replace it by initdram()
11299 Historically the 405 U-Boot port had a dram_init() call in early init
11300 stage. This function was still called from start.S and most of the time
11301 coded in assembler. This is not needed anymore (since a long time) and
11302 boards should implement the common initdram() function in C instead.
11304 This patch now removed the dram_init() call from start.S and removes the
11305 empty implementations that are scattered through most of the 405 board
11306 ports. Some older board ports really implement this dram_init() though.
11316 I changed those boards to call this assembler dram_init() function now
11317 from their board specific initdram() instead. This *should* work, but please
11318 test again on those platforms. And it is perhaps a good idea that those
11319 boards use some common 405 SDRAM initialization code from cpu/ppc4xx at
11320 some time. So further patches welcome here.
11322 Signed-off-by: Stefan Roese <sr@denx.de>
11324 commit 192f90e272b3989ee7b4a666d1fdab831f20f8d2
11325 Author: Stefan Roese <sr@denx.de>
11326 Date: Mon Jun 2 17:22:11 2008 +0200
11328 ppc4xx: Use new 4xx SDRAM controller enable defines in common ECC code
11330 Signed-off-by: Stefan Roese <sr@denx.de>
11332 commit 39b32be18cd33b53a84065edcd4e465165cc5564
11333 Author: Stefan Roese <sr@denx.de>
11334 Date: Mon Jun 2 17:20:03 2008 +0200
11336 ppc4xx: Fix common ECC generation code for 440GP style platforms
11338 This patch makes the common 4xx ECC code really usable on 440GP style
11341 Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
11342 compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
11343 we need to make some processor dependant defines used later on by the
11346 Signed-off-by: Stefan Roese <sr@denx.de>
11348 commit ec724f883ee3f3925e6c55027e8ffa70ada83303
11349 Author: Stefan Roese <sr@denx.de>
11350 Date: Mon Jun 2 17:13:55 2008 +0200
11352 ppc4xx: Change Kilauea to use the common DDR2 init function
11354 This patch changes the kilauea and kilauea_nand (for NAND booting)
11355 board port to not use a board specific DDR2 init routine anymore. Now
11356 the common code from cpu/ppc4xx is used.
11358 Thanks to Grant Erickson for all his basic work on this 405EX early
11361 Signed-off-by: Stefan Roese <sr@denx.de>
11363 commit 17ceb069b85fbb9269c4dc09b2c237f88334c5ba
11364 Author: Stefan Roese <sr@denx.de>
11365 Date: Mon Jun 2 14:59:21 2008 +0200
11367 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part2
11369 This patch now adds a new header file (asm-ppc/ppc4xx-sdram.h) for all
11370 ppc4xx related SDRAM/DDR/DDR2 controller defines.
11372 Signed-off-by: Stefan Roese <sr@denx.de>
11374 commit 36ea16f6a066ccb046e91ebce4f326b69f4c0569
11375 Author: Stefan Roese <sr@denx.de>
11376 Date: Mon Jun 2 14:57:41 2008 +0200
11378 ppc4xx: Consolidate PPC4xx SDRAM/DDR/DDR2 defines, part1
11380 This patch removes all SDRAM related defines from the PPC4xx headers
11381 ppc405.h and ppc440.h. This is needed since now some 405 PPC's use
11382 the same SDRAM controller as 440 systems do (like 405EX and 440SP).
11384 It also introduces new defines for the equipped SDRAM controller based on
11385 which PPC variant is used. There new defines are:
11387 used on 405GR/CR/EP and some Xilinx Virtex boards.
11389 used on 440GP/GX/EP/GR.
11391 used on 440EPx/GRx.
11393 used on 405EX/r/440SP/SPe/460EX/GT.
11395 Signed-off-by: Stefan Roese <sr@denx.de>
11397 commit 64852d09e06dd6db2b2db2a3c59bc2db176a54d6
11398 Author: Stefan Roese <sr@denx.de>
11399 Date: Mon Jun 2 14:35:44 2008 +0200
11401 ppc4xx/NAND_SPL: Consolidate 405 and 440 NAND booting code in start.S
11403 This patch consolidates the 405 and 440 parts of the NAND booting code
11404 selected via CONFIG_NAND_SPL. Now common code is used to initialize the
11405 SDRAM by calling initdram() and to "copy/relocate" to SDRAM/OCM/etc.
11406 Only *after* running from this location, nand_boot() is called.
11408 Please note that the initsdram() call is now moved from nand_boot.c
11409 to start.S. I experienced problems with some boards like Kilauea
11410 (405EX), which don't have internal SRAM (OCM) and relocation needs to
11411 be done to SDRAM before the NAND controller can get accessed. When
11412 initdram() is called later on in nand_boot(), this can lead to problems
11413 with variables in the bss sections like nand_ecc_pos[].
11415 Signed-off-by: Stefan Roese <sr@denx.de>
11416 Acked-by: Scott Wood <scottwood@freescale.com>
11418 commit 8a24c07ba5da2c72ad1f05e3eb8a463750200c98
11419 Author: Grant Erickson <gerickson@nuovations.com>
11420 Date: Thu May 22 14:44:24 2008 -0700
11422 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
11424 This patch (Part 2 of 2):
11426 * Rolls up a suite of changes to enable correct primordial stack and
11427 global data handling when the data cache is used for such a purpose
11428 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
11430 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
11431 eliminating redundant ECC initialization implementations and moving
11432 redundant SDRAM initialization out of board code into shared 4xx
11435 * Enables MCSR visibility on the 405EX(r).
11437 * Enables the use of the data cache for initial RAM on
11438 both AMCC's Kilauea and Makalu and removes a redundant
11439 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
11441 - Removed, per Stefan Roese's request, defunct memory.c file for
11442 Makalu and rolled sdram_init from it into makalu.c.
11444 With respect to the 4xx DDR initialization and ECC unification, there
11445 is certainly more work that can and should be done (file renaming,
11446 etc.). However, that can be handled at a later date on a second or
11447 third pass. As it stands, this patch moves things forward in an
11448 incremental yet positive way for those platforms that utilize this
11449 code and the features associated with it.
11451 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11452 Signed-off-by: Stefan Roese <sr@denx.de>
11454 commit c821b5f120bedf73867513466412587c6912a8f8
11455 Author: Grant Erickson <gerickson@nuovations.com>
11456 Date: Thu May 22 14:44:14 2008 -0700
11458 ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling
11460 This patch (Part 1 of 2):
11462 * Rolls up a suite of changes to enable correct primordial stack and
11463 global data handling when the data cache is used for such a purpose
11464 for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).
11466 * Related to the first, unifies DDR2 SDRAM and ECC initialization by
11467 eliminating redundant ECC initialization implementations and moving
11468 redundant SDRAM initialization out of board code into shared 4xx
11471 * Enables MCSR visibility on the 405EX(r).
11473 * Enables the use of the data cache for initial RAM on
11474 both AMCC's Kilauea and Makalu and removes a redundant
11475 CFG_POST_MEMORY flag from each board's CONFIG_POST value.
11477 - Removed, per Stefan Roese's request, defunct memory.c file for
11478 Makalu and rolled sdram_init from it into makalu.c.
11480 With respect to the 4xx DDR initialization and ECC unification, there
11481 is certainly more work that can and should be done (file renaming,
11482 etc.). However, that can be handled at a later date on a second or
11483 third pass. As it stands, this patch moves things forward in an
11484 incremental yet positive way for those platforms that utilize this
11485 code and the features associated with it.
11487 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11488 Signed-off-by: Stefan Roese <sr@denx.de>
11490 commit a439680019e06171d4a5694b7992accce87f590e
11491 Author: Grant Erickson <gerickson@nuovations.com>
11492 Date: Wed May 21 13:28:30 2008 -0700
11494 PPC4xx: Simplified post_word_{load, store}
11496 This patch simplifies post_word_{load,store} by using the preprocessor
11497 to eliminate redundant, copy-and-pasted code.
11499 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
11501 commit f979690ee337450b2030aba128f95b7a8d9881c0
11502 Author: Kumar Gala <galak@kernel.crashing.org>
11503 Date: Thu May 15 15:13:08 2008 -0500
11505 Fix warnings from gcc-4.3.0 build on a ppc host
11507 * The cfi_flash.c memset fix actual allows the board to boot so there is
11508 a bit more going on here than just resolving warnings associated with
11509 uninitialized variables.
11511 * include/asm/bitops.h:302: warning: '__swab32p' is static but used in
11512 inline function 'ext2_find_next_zero_bit' which is not static
11514 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11516 commit 9b124a68346ce9605b6e1fcf79e1021541cdba9e
11517 Author: Becky Bruce <becky.bruce@freescale.com>
11518 Date: Wed May 14 13:09:51 2008 -0500
11520 MPC512x: Change traps.c to not reference non-addressable memory
11522 Currently, END_OF_RAM is used by the trap code to determine if
11523 we should attempt to access the stack pointer or not. However,
11524 on systems with a lot of RAM, only a subset of the RAM is
11525 guaranteed to be mapped in and accessible. Change END_OF_RAM
11526 to use get_effective_memsize() instead of using the raw ram
11527 size out of the bd.
11529 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11531 commit 81673e9ae14b771cd13faf19947192599cae3959
11532 Author: Kumar Gala <galak@kernel.crashing.org>
11533 Date: Tue May 13 19:01:54 2008 -0500
11535 Make sure common.h is the first include.
11537 If common.h isn't first we can get CONFIG_ options defined in the
11538 board config file ignored. This can cause an issue if any of those
11539 config options impact the size of types of data structures
11540 (eg CONFIG_PHYS_64BIT).
11542 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
11544 commit 95d449ad4de79dd32b1705b8a4d3550f1e9081e3
11545 Author: Marian Balakowicz <m8@semihalf.com>
11546 Date: Tue May 13 15:53:29 2008 +0200
11548 Avoid initrd and logbuffer area overlaps
11550 Add logbuffer to reserved LMB areas to prevent initrd allocation
11551 from overlaping with it.
11553 Make sure to use correct logbuffer base address.
11555 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
11557 commit 6956d53d9934862507f83f0e3255dfd4662e7482
11558 Author: Sascha Laue <sascha.laue@liebherr.com>
11559 Date: Tue May 13 13:29:54 2008 +0200
11561 lwmon5: add memory-pattern-test to FPGA POST.
11563 commit e34a0e911b6a1568d0ca864234fbd0ee060d9b35
11564 Author: Becky Bruce <becky.bruce@freescale.com>
11565 Date: Thu May 8 19:02:51 2008 -0500
11567 PPC: 86xx Add bat registers to reginfo command
11569 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11571 commit d5b9b8cdb8b6eb3a8b0f5d9909d69ccc9c703ed9
11572 Author: Becky Bruce <becky.bruce@freescale.com>
11573 Date: Fri May 9 15:41:35 2008 -0500
11575 PPC: Add print_bats() to lib_ppc/bat_rw.c
11577 This function prints the values of all the BAT register
11578 pairs - I needed this for debug earlier this week; adding it to
11579 lib_ppc so others can use it (and add it to reginfo commands
11582 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11584 commit c148f24c15743a02e855636e6bed013bd121f7f2
11585 Author: Becky Bruce <becky.bruce@freescale.com>
11586 Date: Thu May 15 21:29:04 2008 -0500
11588 PPC: Change lib_ppc/bat_rw.c to use high bats
11590 Currently, this code only deals with BATs 0-3, which makes
11591 it useless on systems that support BATs 4-7. Add the
11592 support for these registers.
11594 Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
11596 commit 31d826722434931e1152a09d140187dcf72f8aac
11597 Author: Becky Bruce <becky.bruce@freescale.com>
11598 Date: Thu May 8 19:02:12 2008 -0500
11600 PPC: Create and use CONFIG_HIGH_BATS
11602 Change all code that conditionally operates on high bat
11603 registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
11604 instead of the myriad ways this is done now. Define the option
11605 for every config for which high bats are supported (and
11606 enabled by early boot, on parts where they're not always
11609 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
11611 commit aa3b8bf9c30065bb2ea852799d32db5020598495
11612 Author: Wolfgang Grandegger <wg@grandegger.com>
11613 Date: Wed May 28 19:55:19 2008 +0200
11615 E1000: Add support for the 82541GI LF Intel Pro 1000 GT Desktop Adapter
11617 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
11618 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11620 commit ff36fbb2e7583fb808eef773f511489c7a9c2df3
11621 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11622 Date: Wed May 28 13:06:25 2008 -0500
11624 ColdFire: Add 10 base ethernet support for mcf5445x
11626 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
11627 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
11629 commit 1a9fcc4b765599db24fa9c32293599f24c7a19ba
11630 Author: Jason McMullan <mcmullan@netapp.com>
11631 Date: Fri May 30 00:53:38 2008 +0900
11633 mips: Add an 'include/asm/errno.h', like all other architectures
11635 All other u-boot architectures have an include/asm/errno.h, so
11636 this change adds it to the mips include/asm-mips headers also.
11638 Stolen from Linux 2.6.25.
11640 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11642 commit e2ad8426624bac457acc6925b6ff408e9bf20466
11643 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11644 Date: Fri May 30 00:53:38 2008 +0900
11646 [MIPS] <asm/mipsregs.h>: Update coprocessor register access macros
11648 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11650 commit 1a3adac81c292f2ee76e43cdeb2fbe8f915fe194
11651 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11652 Date: Fri May 30 00:53:38 2008 +0900
11654 [MIPS] <asm/mipsregs.h>: Update register / bit field definitions
11656 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11658 commit bf462ae450a7f2eeeddc699ed345b391e3263540
11659 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11660 Date: Fri May 30 00:53:37 2008 +0900
11662 [MIPS] <asm/mipsregs.h>: CodinygStyle cleanups
11664 No functional changes.
11666 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11668 commit 89a1550ec6b74452274a7a23127936e2c7eec711
11669 Author: Jason McMullan <mcmullan@netapp.com>
11670 Date: Fri May 30 00:53:37 2008 +0900
11672 mips: If CONFIG_CMD_SPI is defined, call spi_init()
11674 The mips architecture currently does not call 'spi_init()' in the generic
11675 board initialization routine is CONFIG_CMD_SPI is defined.
11677 This patch rectifies that problem.
11679 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11680 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11682 commit e996bc339b0f39f6c0b29b1455ba7eb318b023d3
11683 Author: Jason McMullan <mcmullan@netapp.com>
11684 Date: Fri May 30 00:53:37 2008 +0900
11686 [MIPS] lib_mips/board.c: Add nand_init
11688 This patch adds the standard 'nand_init()' call to the mips generic
11689 'board_init_r()' call, bringing MIPS in line with the other architectures.
11691 Signed-off-by: Jason McMullan <mcmullan@netapp.com>
11692 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
11694 commit d6ac2ed893c2168738aee01579d6283af8d37045
11695 Author: Scott Wood <scottwood@freescale.com>
11696 Date: Thu May 22 10:49:46 2008 -0500
11698 Remove prototypes of nand_init() in favor of including nand.h.
11700 Likewise with onenand_init().
11702 Signed-off-by: Scott Wood <scottwood@freescale.com>
11704 commit 229c56f07a82eacda8c8720cb146fc9be0f6db54
11705 Author: Scott Wood <scottwood@freescale.com>
11706 Date: Thu May 22 10:49:00 2008 -0500
11708 Make onenand_uboot.h self-sufficient.
11710 Don't assume types are provided by previously included headers.
11712 Signed-off-by: Scott Wood <scottwood@freescale.com>
11714 commit 9723bbb46abb7b2ca24eead5114a3faa58060c20
11715 Author: Dirk Behme <dirk.behme@gmail.com>
11716 Date: Wed Jan 16 14:26:59 2008 +0100
11718 nand: Correct NAND erase percentage output
11720 For NAND erase sizes smaller than one NAND erase block, erase
11721 percentage output becomes grater than 100% e.g.
11725 Device 0: NAND 64MiB 1,8V 8-bit, sector size 16 KiB
11726 > nand erase 0x100000 0x2000
11727 NAND erase: device 0 offset 0x100000, size 0x2000
11728 Erasing at 0x100000 -- 200% complete.
11733 Correct this and give user a warning that more is erased than specified:
11736 > nand erase 0x100000 0x2000
11737 NAND erase: device 0 offset 0x100000, size 0x2000
11738 Warning: Erase size 0x00002000 smaller than one erase block 0x00004000
11739 Erasing 0x00004000 instead
11740 Erasing at 0x100000 -- 100% complete.
11745 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
11747 commit 5922db6c0948506be91e0de44e7a6863a18a417f
11748 Author: Stelian Pop <stelian@popies.net>
11749 Date: Tue May 13 17:31:24 2008 +0200
11751 Cleanup nand_info[] declaration.
11753 The nand_info array is declared as extern in several .c files.
11754 Those days, nand.h contains a reference to the array, so there is
11755 no need to declare it elsewhere.
11757 Signed-off-by: Stelian Pop <stelian@popies.net>
11758 Signed-off-by: Scott Wood <scottwood@freescale.com>
11760 commit 135f0a7488af2947adbe4b40b79280bdfe5e9886
11761 Author: Scott Wood <scottwood@freescale.com>
11762 Date: Mon May 19 09:30:43 2008 -0500
11764 NAND: Provide a sane default for NAND_MAX_CHIPS.
11766 This allows the header to be included regardless of whether a board's
11767 config file provides NAND-related defininitions.
11769 Signed-off-by: Scott Wood <scottwood@freescale.com>
11771 commit a8092c021d27f27f4b323b7d49979ca01b3fc19d
11772 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11773 Date: Mon May 26 12:19:10 2008 +0200
11775 avr32: Fix theoretical race in udelay()
11777 If the specified delay is very short, the cycle counter may go past the
11778 "end" time we are waiting for before we get around to reading it.
11780 Fix it by checking the different between the cycle count "now" and the
11781 cycle count at the beginning. This will work as long as the delay
11782 measured in number of cycles is below 2^31.
11784 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11786 commit 48ea623eae8674793372e3e7c95e72e5a44d7a95
11787 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11788 Date: Wed May 21 13:01:09 2008 +0200
11790 avr32: Compile atmel_mci.o conditionally
11792 Remove #ifdef CONFIG_MMC from the source file and use conditional
11793 compilation in the Makefile instead.
11795 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11797 commit e92a5bf8330654e33ac13f6b3058634e58f5d1c0
11798 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11799 Date: Thu May 22 12:28:25 2008 +0200
11801 avr32: Fix wrong error flags in atmel_mci driver
11803 Make sure we check for CRC errors when sending commands that use CRC
11806 Reported-by: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
11807 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11809 commit 7a96ddadd13e6ac9a829affce9b6f8823f580e49
11810 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11811 Date: Wed May 21 11:10:59 2008 +0200
11813 avr32: Fix two warnings in atmel_mci.c
11815 The warnings are harmless but annoying. Let's fix them.
11817 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11819 commit a23e277c4a3a2bbc42d237aae29da3a8971e757f
11820 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11821 Date: Mon May 19 11:36:28 2008 +0200
11823 avr32: Rework SDRAM initialization code
11825 This cleans up the SDRAM initialization and related code a bit, and
11826 allows faster booting.
11828 * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h
11829 * Remove memory test from sdram_init() and make caller responsible
11830 for verifying the SDRAM and determining its size.
11831 * Remove base_address member from struct sdram_config (was sdram_info)
11832 * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT
11833 * Add support for a common STK1000 hack: 16MB SDRAM instead of 8.
11835 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11837 commit 95107b7c028806919630bf02c653aa8f4f867c94
11838 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11839 Date: Mon May 19 11:27:37 2008 +0200
11841 avr32: Do stricter stack checking in the exception handler
11843 Don't do a stack dump if the stack pointer is outside the memory area
11844 reserved for stack.
11846 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11848 commit caf83ea888a0220f41747d0b7748fa43b4a4bd49
11849 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11850 Date: Fri May 2 15:32:57 2008 +0200
11852 avr32: Use the same entry point for reset and exception handling
11854 Since the reset vector is always aligned to a very large boundary, we
11855 can save a couple of KB worth of alignment padding by placing the
11856 exception vectors at the same address.
11858 Deciding which one it is is easy: If we're handling an exception, the
11859 CPU is in Exception mode. If we're starting up after reset, the CPU is
11860 in Supervisor mode. So this adds a very minimal overhead to the reset
11861 path (only executed once) and the exception handling path (normally
11862 never executed at all.)
11864 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11866 commit 0c16eed2189a190bd5655b33c029f809a9b31128
11867 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11868 Date: Fri May 2 15:24:22 2008 +0200
11870 avr32: Put memset in its own section
11872 All C code is compiled with -ffunction-sections -fdata-sections.
11873 Assembly functions should get their own sections as well so that
11874 everything looks consistent.
11876 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11878 commit 3ace2527ba80bd2fe1bceaab50d0b3c4fb5dd020
11879 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11880 Date: Fri May 2 15:21:40 2008 +0200
11882 avr32: Rename pm_init() as clk_init() and make SoC-specific
11884 pm_init() was always more about clock initialization than anything
11885 else. Dealing with PLLs, clock gating and such is also inherently
11886 SoC-specific, so move it into a SoC-specific directory.
11888 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11890 commit 4f5972c3b2454c22957f2842cfe64ec8118e015b
11891 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11892 Date: Wed Apr 30 16:15:57 2008 +0200
11894 avr32: Use new-style Makefile for the at32ap platform
11896 This makes it easier to avoid compiling certain files later.
11898 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11900 commit a9b2bb78a1bd8ebdb633509bdd1c8134d527b213
11901 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11902 Date: Wed Apr 30 14:36:47 2008 +0200
11904 avr32: Remove unused file cpu/at32ap/pm.c
11906 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11908 commit 44453b25b06426eef0b7b2fa7c026fdf19ce34f2
11909 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11910 Date: Wed Apr 30 14:19:28 2008 +0200
11912 avr32: Clean up the HMATRIX code
11914 Rework the HMATRIX configuration interface so that it becomes easier
11915 to configure the HMATRIX for boards with special needs, and add new
11918 The HMATRIX header file has been split into a general,
11919 chip-independent part with register definitions, etc. and a
11920 chip-specific part with SFR bitfield definitions and master/slave
11923 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11925 commit 0a2e48792dd372c90b80059f3235e67a567e16fc
11926 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11927 Date: Thu Nov 22 12:14:11 2007 +0100
11929 avr32: Add support for the ATSTK1006 board
11931 This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on
11932 board. It's currently in production and will be available soon.
11934 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11936 commit 781eb9a1e4af4bd34c138e6126ec5cc6dd4b5440
11937 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11938 Date: Tue Apr 29 12:53:05 2008 +0200
11940 avr32: Get rid of the .flashprog section
11942 The .flashprog section was only needed back when we were running
11943 directly from flash, and it's even more useless on NGW100 since it
11944 uses the CFI flash driver which never used this workaround in the
11947 Remove it on STK1000 as well, and get rid of all the associated code and
11950 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11952 commit cdd42c0c7a5205fc380912d83229069a71ea3abf
11953 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11954 Date: Wed Apr 30 13:09:56 2008 +0200
11956 avr32: Use correct condition around macb clock accessors
11958 get_macb_pclk_rate() and get_macb_hclk_rate() should be available when
11959 the chip has a MACB controller, not when it has a USART.
11961 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11963 commit f793a3581901ff39c2abb94012d9bbc8573ccf02
11964 Author: David Brownell <david-b@pacbell.net>
11965 Date: Wed Apr 16 22:57:58 2008 -0700
11967 avr32: Disable the AP7000 internal watchdog on startup
11969 This patch forces the watchdog off in all cases. That will at least
11970 get rid of the constant reboot cycle, though it won't let the watchdog
11971 actually run in the new kernels: its probe() comes up with a polite
11974 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11976 commit 55ac7a7490b55da56659f95d82a0c83b9756df27
11977 Author: David Brownell <david-b@pacbell.net>
11978 Date: Fri Feb 22 12:54:39 2008 -0800
11980 avr32: stk1002 and ngw100 convergence
11982 Make STK1002 and NGW100 boards act more alike:
11983 - STK boards can use as many arguments as NGW
11984 - STK boards don't need to manage FPGAs either
11985 - NGW commands should match STK ones
11987 Also spell U-Boot right in prompts for STK1002 and NGW100.
11989 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
11990 [haavard.skinnemoen@atmel.com: update STK100[34] as well]
11991 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
11993 commit 5e1882df6a3efc7de5524d28cea4ecde7d163d54
11994 Author: Sergei Poselenov <sposelenov@emcraft.com>
11995 Date: Tue May 27 13:47:00 2008 +0200
11997 Socrates: Fix PCI bus frequency report
11999 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12001 commit 791e1dba8de76ad8e762a7badb869f224a1f8b82
12002 Author: Sergei Poselenov <sposelenov@emcraft.com>
12003 Date: Tue May 27 11:49:13 2008 +0200
12005 Socrates: Added USB support.
12007 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12009 commit 5a904e5637cff1d708dc67098004f83ba9e84c54
12010 Author: Sergei Poselenov <sposelenov@emcraft.com>
12011 Date: Tue May 27 11:35:02 2008 +0200
12013 USB: add new configuration variable CONFIG_PCI_OHCI_DEVNO
12015 In case of several PCI USB controllers on a board this variable
12016 specifys which controller to use.
12017 See doc/README.generic_usb_ohci for details.
12019 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12021 commit 2f7468aeba60e1288030a8d007c4e63bd3f13221
12022 Author: Sergei Poselenov <sposelenov@emcraft.com>
12023 Date: Tue May 27 10:36:07 2008 +0200
12025 Socrates: add support for DS75 Digital Thermo Sensor on I2C bus.
12027 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12029 commit 83e9d7a2614d4006b92690afa3390c291734267e
12030 Author: Sergei Poselenov <sposelenov@emcraft.com>
12031 Date: Mon May 26 18:16:04 2008 +0200
12033 Socrates: Config file cleanup.
12035 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12037 commit 602cac1389b755b223272f2328a47e6f8c240848
12038 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12039 Date: Sat May 24 12:47:46 2008 +0200
12041 MAKEALL: add at91 list
12043 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12045 commit 290ef6436838b1cc013bd67e0e0495c9eb3e23c0
12046 Author: Ron Madrid <ron_madrid@sbcglobal.net>
12047 Date: Fri May 23 15:37:05 2008 -0700
12049 Add Marvell 88E1118 support for TSEC
12051 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
12052 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12054 commit 557b377d8bfc8b833b6e749457bcdfa298331a24
12055 Author: Jens Gehrlein <sew_s@tqs.de>
12056 Date: Mon May 5 14:06:11 2008 +0200
12058 smc911x: add 16 bit support
12060 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
12061 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
12063 commit 6324e5bec8825f7fee3026ffbd394454ae8b53fb
12064 Author: Christian Eggers <ceggers@gmx.de>
12065 Date: Wed May 21 21:29:10 2008 +0200
12067 Fix endianess conversion in usb_ohci.c
12069 Sorry, I forgot this line:
12071 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12073 I think this must be swapped (result may be equal).
12075 commit c918261c6d9f265f88baf70f8a73dfe6f0cb9596
12076 Author: Christian Eggers <ceggers@gmx.de>
12077 Date: Wed May 21 22:12:00 2008 +0200
12079 USB: replace old swap_ with proper endianess conversion macros
12081 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12082 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12084 commit fb63939b4fe140849cdba69f9e64a3e0e2f3ce1c
12085 Author: Christian Eggers <ceggers@gmx.de>
12086 Date: Wed May 21 21:29:10 2008 +0200
12088 Fix endianess conversion in usb_ohci.c
12090 Signed-off-by: Christian Eggers <ceggers@gmx.de>
12091 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12093 commit 477434c63c2ea5baa5c6c4e43500786f436511ff
12094 Author: Sergei Poselenov <sposelenov@emcraft.com>
12095 Date: Thu May 22 01:15:53 2008 +0200
12097 USB: add support for multiple PCI OHCI controllers
12099 Add new configuration variable CONFIG_PCI_OHCI_DEVNO.
12100 In case of several PCI USB controllers on a board this variable
12101 specifys which controller to use.
12103 Also add USB support for sokrates board.
12105 See doc/README.generic_usb_ohci for details.
12107 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12108 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12110 commit ce6754df61cbe23b5b73d095a00ac9a8504b3d77
12111 Author: Wolfgang Denk <wd@denx.de>
12112 Date: Wed May 21 16:56:08 2008 +0200
12114 Fix some whitespace issues
12116 introduced by 53677ef18 "Big white-space cleanup."
12118 Signed-off-by: Wolfgang Denk <wd@denx.de>
12120 commit 4416603aeb06861b468b06a981e52c3ff805db7b
12121 Author: York Sun <yorksun@freescale.com>
12122 Date: Mon May 12 14:36:39 2008 -0500
12124 Make ads5121 out-of-tree compiling safe
12126 Reuse the existing DIU driver in board/freescale/common.
12128 Signed-off-by: York Sun <yorksun@freescale.com>
12130 commit 0e1bad47cd345c76c91a64caf41011e431b62599
12131 Author: York Sun <yorksun@freescale.com>
12132 Date: Mon May 5 10:20:01 2008 -0500
12134 Adding DIU support for Freescale 5121ADS
12136 Add DIU and cfb console support to FSL 5121ADS board.
12138 Use #define CONFIG_VIDEO in config file to enable fb console.
12140 Signed-off-by: York Sun <yorksun@freescale.com>
12142 commit a48ff68d235e671176f6b496c44246dbe5e0a93f
12143 Author: York Sun <yorksun@freescale.com>
12144 Date: Mon May 5 10:20:00 2008 -0500
12146 Replace DPRINTF with debug
12148 Remove DPRINTF macro and replace it with generic debug macro.
12150 Signed-off-by: York Sun <yorksun@freescale.com>
12152 commit 3b80c5f574ad7f6e1c55a68f42752b427fdf778d
12153 Author: York Sun <yorksun@freescale.com>
12154 Date: Mon May 5 10:19:59 2008 -0500
12156 Move pixel clock setting to board file
12158 The clock divider has different format in 5121 and 8610. This patch moves it to
12159 board specific code.
12161 Signed-off-by: York Sun <yorksun@freescale.com>
12163 commit 53677ef18e25c97ac613349087c5cb33ae5a2741
12164 Author: Wolfgang Denk <wd@denx.de>
12165 Date: Tue May 20 16:00:29 2008 +0200
12167 Big white-space cleanup.
12169 This commit gets rid of a huge amount of silly white-space issues.
12170 Especially, all sequences of SPACEs followed by TAB characters get
12171 removed (unless they appear in print statements).
12173 Also remove all embedded "vim:" and "vi:" statements which hide
12174 indentation problems.
12176 Signed-off-by: Wolfgang Denk <wd@denx.de>
12178 commit 2f845dc2bdf461bfee9fa25823f769f5db9eba0b
12179 Author: Sergei Poselenov <sposelenov@emcraft.com>
12180 Date: Thu May 8 17:46:23 2008 +0200
12182 socrates: fix second TSEC configuration (it is actually TSEC3)
12184 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12186 commit 793670c3c0f0f72caead62f0be9fc3d9fbc6060f
12187 Author: Sergei Poselenov <sposelenov@emcraft.com>
12188 Date: Thu May 8 14:17:08 2008 +0200
12190 Fixed reset for socrates
12192 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12194 commit e18575d5f589a62e19c70d471d4b4e27cad3af56
12195 Author: Sergei Poselenov <sposelenov@emcraft.com>
12196 Date: Wed May 7 15:10:49 2008 +0200
12198 socrates: changes to support FDT
12200 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12201 Signed-off-by: Wolfgang Denk <wd@denx.de>
12203 commit 5d108ac8f435924c624cd6aaacd44f35f5cf94c0
12204 Author: Sergei Poselenov <sposelenov@emcraft.com>
12205 Date: Wed Apr 30 11:42:50 2008 +0200
12207 Initial support for "Socrates" board
12209 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
12211 commit 0e15ddd11f1a84c465e434eb051d2ef08ef02b9b
12212 Author: Yuri Tikhonov <yur@emcraft.com>
12213 Date: Thu May 8 15:46:42 2008 +0200
12215 POST: replace the LOGBUFF_INITIALIZED flag in gd->post_log_word (1 << 31) with the GD_FLG_LOGINIT flag in gd->flags.
12217 This way we become able to utilize the full post_log_word for POST
12218 activities (overwise, POST ECC, which has 0x8000 ID, could be
12219 erroneously treated as started in post_output_backlog() even if there
12220 was actually no POST ECC run (because of OCM POST failure, for
12223 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12225 commit 7845d49094c81321021b50a4dbb8864d2f3777e4
12226 Author: Yuri Tikhonov <yur@emcraft.com>
12227 Date: Thu May 8 15:46:02 2008 +0200
12229 POST: mark OCM test as POST_STOP
12231 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12233 commit 28a385065882d6cb6ac5f443311ff87887ed7c13
12234 Author: Yuri Tikhonov <yur@emcraft.com>
12235 Date: Thu May 8 15:45:26 2008 +0200
12237 POST: add POST_STOP flag
12239 Don't run futher tests in case of a test fails that is marked as
12242 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12243 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12245 commit a525145d8110d15b4389d23c3ea8a78f22509d3f
12246 Author: Yuri Tikhonov <yur@emcraft.com>
12247 Date: Thu May 8 15:44:16 2008 +0200
12249 POST: switch CFG_POST_OCM with CFG_POST_CODEC (workaround)
12251 Switch the OCM testid with the codec one. The reason is that current
12252 implementation requires the POST_ROM testid to fit into lower 16
12253 bits, and the codec test will never run with POST_ROM hopefully.
12255 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12257 commit 8b96c788d58f7cb85a89ee3f19c9b335d22443cd
12258 Author: Yuri Tikhonov <yur@emcraft.com>
12259 Date: Thu May 8 15:43:28 2008 +0200
12261 lwmon5: enable OCM post test on lwmon5 board
12263 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12265 commit 6e8ec682268493b8d098f99e17b1ce71b4448977
12266 Author: Yuri Tikhonov <yur@emcraft.com>
12267 Date: Thu May 8 15:42:47 2008 +0200
12269 POST: OCM test added.
12271 Added OCM test to POST layer. This version runs before all other tests
12272 but doesn't yet interrupt post sequence on failure.
12274 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12275 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
12277 commit 6891260bdd935a382c95d9fa333922b0dfded68a
12278 Author: Yuri Tikhonov <yur@emcraft.com>
12279 Date: Thu May 8 15:40:39 2008 +0200
12283 Signed-off-by: Ilya Yanok <yanok@emcraft.com>
12285 commit 727f63334676e760877d43bfb8f0e9331ac8b101
12286 Author: Hebbar <gururajakr@sanyo.co.in>
12287 Date: Tue May 20 02:16:36 2008 -0700
12289 common/usb.c: fix incorrect escape sequence
12291 Signed off by: Gururaja Hebbar <gururajakr@sanyo.co.in>
12293 commit 4ce1e23b5e12283579828b3d23e8fd6e1328a7aa
12294 Author: York Sun <yorksun@freescale.com>
12295 Date: Thu May 15 15:26:27 2008 -0500
12297 Fix 8313ERDB board configuration
12299 Change LCRR clock ratio from 2 to 4 to commodate VSC7385.
12300 Correct TSEC1 vs TSEC2 assignment.
12301 Define ETHADDR and ETH1ADDR always.
12303 Signed-off-by: York Sun <yorksun@freescale.com>
12304 Signed-off-by: Timur Tabi <timur@freescale.com>
12306 commit 2c289e320dcfb3760e99cf1d765cb067194a1202
12307 Author: Jon Loeliger <jdl@freescale.com>
12308 Date: Mon May 19 09:47:25 2008 -0500
12310 mpc86xx: Removed unused and unconfigured memory test code.
12312 Besides, other common code exists.
12314 Signed-off-by: Jon Loeliger <jdl@freescale.com>
12316 commit 180a90abdae72587c0f679edf8991455e559440d
12317 Author: Wolfgang Denk <wd@denx.de>
12318 Date: Mon May 19 12:47:11 2008 +0200
12322 Update CHANGELOG for release.
12324 Signed-off-by: Wolfgang Denk <wd@denx.de>
12326 commit 16bedc661de0dae767b1377d8413373a3fbcfa79
12327 Author: Stefan Roese <sr@denx.de>
12328 Date: Mon May 19 07:14:38 2008 +0200
12330 ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
12332 When SATA is selected (via jumper J6) we need to disable the first PCIe
12333 node in the device tree, so that Linux doesn't initialize it. Otherwise
12334 the Linux SATA driver will fail to detect the devices.
12336 The same goes the other way around too. So if PCIe is selected we need
12337 to disable the SATA node in the device tree.
12339 This is because PCIe port 0 and SATA on 460EX share the same pins
12340 (multiplexed) and we have to configure in U-Boot which peripheral is
12343 Signed-off-by: Stefan Roese <sr@denx.de>
12345 commit 3cc27b426aeefe2930f911692e9df3143fb2565f
12346 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12347 Date: Sun May 18 19:09:58 2008 +0200
12349 i386: Fix multiple definitions of __show_boot_progress
12351 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12353 commit 311f3446930c1e64c12026c1cfd00500b05be52d
12354 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12355 Date: Sun May 18 19:09:57 2008 +0200
12357 sc530_spunk: add missing SOBJS entry
12359 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12361 commit a559317143b4f95927b08cd388707e6f077e95fa
12362 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12363 Date: Sun May 18 19:09:56 2008 +0200
12365 sc520_spunk: Fix flash
12367 flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
12368 flash.c:398: error: label at end of compound statement
12370 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12372 commit 91f221317af64191ee8caf303ea9305943158691
12373 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12374 Date: Sun May 18 19:09:49 2008 +0200
12376 drivers/pcmcia: add missing i82365
12378 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12380 commit dd223944132f97ffa52977ea95e5a52428f5cc2f
12381 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12382 Date: Sun May 18 19:09:47 2008 +0200
12384 i386/bootm: remove unused var
12386 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12388 commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
12389 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12390 Date: Sun May 18 19:09:45 2008 +0200
12392 example/gitignore: update with all generated examples
12394 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12396 commit a38dc3ea8614f8b0c41e432b445a9959b9711295
12397 Author: Wolfgang Denk <wd@denx.de>
12398 Date: Thu May 15 00:42:45 2008 +0200
12400 TQM8272: fix out-of-tree building
12402 ...and add to MAKEALL script
12404 Signed-off-by: Wolfgang Denk <wd@denx.de>
12406 commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
12407 Author: Wolfgang Denk <wd@denx.de>
12408 Date: Wed May 14 23:34:53 2008 +0200
12410 environment: fix bug introduced by commit a8409f4f1ac8
12412 env_get_char is not a function, but a pointer to one.
12414 Signed-off-by: Wolfgang Denk <wd@denx.de>
12416 commit 0c11935cd62ca1f65eeb228ff4c848440d4553bf
12417 Author: Gary Jennejohn <garyj@denx.de>
12418 Date: Wed May 14 13:39:22 2008 +0200
12420 ppc4xx: QUAD100HD: Allow the environment to be put into flash.
12422 After moving TEXT_BASE the value for CFG_ENV_ADDR was incorrect. Also
12423 use a redundant environment.
12425 Signed-off-by: Gary Jennejohn <garyj@denx.de>
12427 commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
12428 Author: Wolfgang Denk <wd@denx.de>
12429 Date: Wed May 14 13:55:30 2008 +0200
12431 Fix config files for out-of-tree building
12433 Several board/<...>/config.mk files include dynamically built (by
12434 the Makefile) config files but used the wrong file name of
12435 $(TOPDIR)/board/$(BOARDDIR)/config.tmp
12436 instead if the correct
12437 $(OBJTREE)/board/$(BOARDDIR)/config.tmp
12439 The bug is nasty because the build result is correct for the (normal)
12440 in-tree builds, and because 'sinclude' is used no errors get raised
12441 even for out-of-tree build tests. But out-of-tree builds use an
12442 incomplete and thus usually incorrect configuration...
12444 Signed-off-by: Wolfgang Denk <wd@denx.de>
12446 commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
12447 Author: Stefan Roese <sr@denx.de>
12448 Date: Wed May 14 13:40:03 2008 +0200
12450 ppc4xx: Fix bogus Canyonlands config.mk
12452 This patch fixes the canyonlands config.mk file to enable correct
12453 out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
12455 Signed-off-by: Stefan Roese <sr@denx.de>
12457 commit fdd1247a66d788a3446244f6fde9955a93c26322
12458 Author: Stefan Roese <sr@denx.de>
12459 Date: Wed May 14 10:32:32 2008 +0200
12461 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
12463 Canyonlands has a file ddr2_fixed.c which needs special treatment when
12464 building in separate directory. It has to be linked to build directory
12465 otherwise it is not seen.
12467 Signed-off-by: Stefan Roese <sr@denx.de>
12469 commit a8409f4f1ac84c36273c1a1e341189662521bcfb
12470 Author: Wolfgang Denk <wd@denx.de>
12471 Date: Wed May 14 12:22:49 2008 +0200
12473 environment: cleanup prototype declarations of env functions.
12475 Signed-off-by: Wolfgang Denk <wd@denx.de>
12477 commit cf39b07948015c480b72a6e732cf7d839aa93a9e
12478 Author: Wolfgang Denk <wd@denx.de>
12479 Date: Wed May 14 12:21:48 2008 +0200
12481 linkstation_HGLAN: Fix out of tree building.
12483 Signed-off-by: Wolfgang Denk <wd@denx.de>
12485 commit 085551c05ca09e6c491ea11a1c6727a36776a545
12486 Author: Stefan Roese <sr@denx.de>
12487 Date: Wed May 14 10:32:32 2008 +0200
12489 ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
12491 Canyonlands has a file ddr2_fixed.c which needs special treatment when
12492 building in separate directory. It has to be linked to build directory
12493 otherwise it is not seen.
12495 Signed-off-by: Stefan Roese <sr@denx.de>
12497 commit 1510b82d50615f344e89d42533e8224cce067dc0
12498 Author: Wolfgang Denk <wd@denx.de>
12499 Date: Tue May 13 23:15:52 2008 +0200
12501 Makefile: fix "error: version_autogenerated.h: No such file or directory"
12503 Signed-off-by: Wolfgang Denk <wd@denx.de>
12505 commit 54694a91428f6c3280fe1ee0923488a1e7e8dbc4
12506 Author: Stelian Pop <stelian@popies.net>
12507 Date: Tue May 13 17:31:24 2008 +0200
12509 Cleanup nand_info[] declaration.
12511 The nand_info array is declared as extern in several .c files.
12512 Those days, nand.h contains a reference to the array, so there is
12513 no need to declare it elsewhere.
12515 Signed-off-by: Stelian Pop <stelian@popies.net>
12516 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12518 commit 70fab1908fc1734a403711eaabbef546bc4b77dc
12519 Author: Stefan Roese <sr@denx.de>
12520 Date: Tue May 13 20:22:01 2008 +0200
12522 ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
12524 Signed-off-by: Stefan Roese <sr@denx.de>
12526 commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
12527 Author: Wolfgang Denk <wd@denx.de>
12528 Date: Mon May 12 01:11:21 2008 +0200
12530 Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
12532 This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
12533 which broke many PowerPC boards.
12535 commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
12536 Author: Wolfgang Denk <wd@denx.de>
12537 Date: Mon May 12 00:56:28 2008 +0200
12539 Revert "Avoid initrd and logbuffer area overlaps"
12541 This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
12542 which breaks building on all PPC boards that don't use a log buffer.
12544 commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
12545 Author: Nick Spence <nick.spence@freescale.com>
12546 Date: Sat May 10 14:02:04 2008 -0700
12548 Fix offset calculation for multi-type legacy images.
12550 Calculation of tail was incorrect when size % 4 == 0.
12552 New code removes the conditional and does the same thing but with arithmetic
12554 Signed-off-by: Nick Spence <nick.spence@freescale.com>
12556 commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
12557 Author: Wolfgang Denk <wd@denx.de>
12558 Date: Mon May 12 00:40:58 2008 +0200
12560 Revert "Change env_get_char from a global function ptr to a function."
12562 This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
12563 which is known to break booting from dataflash and NAND.
12565 commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
12566 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12567 Date: Sun May 11 23:13:57 2008 +0200
12569 API: remove duplicate syscall check
12571 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12573 commit 67e3beb52c320b0a31cf030716c99392cde2d532
12574 Author: Stelian Pop <stelian@popies.net>
12575 Date: Fri May 9 21:46:51 2008 +0200
12577 AT91: Cleanup unused config header file definitions.
12579 CONFIG_ENV_OVERWRITE is commented out in the config header files,
12580 so let's cleanup the files by removing the whole definition.
12582 Signed-off-by: Stelian Pop <stelian@popies.net>
12583 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12585 commit 19883aede2ac0a522493bfb2b35a7dbb200071b1
12586 Author: Stelian Pop <stelian@popies.net>
12587 Date: Thu May 8 14:52:34 2008 +0200
12589 Support AT91CAP9 revC CPUs
12591 The AT91CAP9 revC CPU has a few differences over the previous,
12592 revB CPU which was distributed in small quantities only (revA was
12593 an internal Atmel product only).
12595 The revC silicon needs a special initialisation sequence to
12596 switch from the internal (imprecise) RC oscillator to the
12597 external 32k clock.
12599 Signed-off-by: Stelian Pop <stelian@popies.net>
12600 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12602 commit 098b7b4b441b12c2a64dd517930f43c793542759
12603 Author: Stelian Pop <stelian@popies.net>
12604 Date: Thu May 8 14:52:33 2008 +0200
12606 Use custom logo for Atmel boards
12608 This patch adds a custom vendor logo for the Atmel AT91 boards.
12610 Signed-off-by: Stelian Pop <stelian@popies.net>
12611 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12613 commit 761c70b80cdd3bead40146b96a8e713d6ae01632
12614 Author: Stelian Pop <stelian@popies.net>
12615 Date: Thu May 8 14:52:32 2008 +0200
12617 AT91SAM9RLEK: hook up the ATMEL LCD driver
12619 This patch makes the necessary adaptations (PIO configurations and
12620 defines in config header file) to hook up the Atmel LCD driver to the
12621 AT91SAM9RLEK board.
12623 Signed-off-by: Stelian Pop <stelian@popies.net>
12624 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12626 commit 56a2479cd7fecabdd91348a775b2801dd2e65c7f
12627 Author: Stelian Pop <stelian@popies.net>
12628 Date: Thu May 8 14:52:31 2008 +0200
12630 AT91SAM9263EK: hook up the ATMEL LCD driver
12632 This patch makes the necessary adaptations (PIO configurations and
12633 defines in config header file) to hook up the Atmel LCD driver to the
12634 AT91SAM9263EK board.
12636 Signed-off-by: Stelian Pop <stelian@popies.net>
12637 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12639 commit 820f2a958325061a446115f3035e48e4726b3390
12640 Author: Stelian Pop <stelian@popies.net>
12641 Date: Thu May 8 14:52:30 2008 +0200
12643 AT91SAM9261EK: hook up the ATMEL LCD driver
12645 This patch makes the necessary adaptations (PIO configurations and
12646 defines in config header file) to hook up the Atmel LCD driver to the
12647 AT91SAM9261EK board.
12649 Signed-off-by: Stelian Pop <stelian@popies.net>
12650 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12652 commit c139b17d20c8371c1e0a8d7fb27c11050cf86304
12653 Author: Stelian Pop <stelian@popies.net>
12654 Date: Thu May 8 14:52:29 2008 +0200
12656 AT91CAP9ADK: hook up the ATMEL LCD driver
12658 This patch makes the necessary adaptations (PIO configurations and
12659 defines in config header file) to hook up the Atmel LCD driver to the
12662 Signed-off-by: Stelian Pop <stelian@popies.net>
12663 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12665 commit 39cf480484fcce5c04a590ee1c30be0c17b02c34
12666 Author: Stelian Pop <stelian@popies.net>
12667 Date: Fri May 9 21:57:18 2008 +0200
12669 Add ATMEL LCD driver
12671 This patch adds support for the ATMEL LCDC driver which is used on some
12672 AT91 and AVR platforms.
12674 Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and
12675 AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy.
12677 Signed-off-by: Stelian Pop <stelian@popies.net>
12678 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12680 commit 2118ebb44dc40f8117c94950fd95799a9ef821b2
12681 Author: Stelian Pop <stelian@popies.net>
12682 Date: Thu May 8 18:52:25 2008 +0200
12684 AT91SAM9RLEK support
12686 This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK
12689 Signed-off-by: Stelian Pop <stelian@popies.net>
12690 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12692 commit 8e429b3eee23927c1222679f6b6f53667b21595c
12693 Author: Stelian Pop <stelian@popies.net>
12694 Date: Thu May 8 18:52:23 2008 +0200
12696 AT91SAM9263EK support
12698 This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK
12701 Signed-off-by: Stelian Pop <stelian@popies.net>
12702 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12704 commit d99a8ff66d8ae87e5c87590ed2e4ead629540607
12705 Author: Stelian Pop <stelian@popies.net>
12706 Date: Thu May 8 20:52:22 2008 +0200
12708 AT91SAM9261EK support
12710 This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK
12713 Signed-off-by: Stelian Pop <stelian@popies.net>
12714 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12716 commit 86c8c8a414988c50104a3b02c29f50af2be738c0
12717 Author: Stelian Pop <stelian@popies.net>
12718 Date: Thu May 8 20:52:21 2008 +0200
12720 AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
12722 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
12723 in order to cope with the changes in DataFlash partitionning scheme
12726 Signed-off-by: Stelian Pop <stelian@popies.net>
12727 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12729 commit 96996ac25d5222611a8888968db6e53a6d3726da
12730 Author: Stelian Pop <stelian@popies.net>
12731 Date: Thu May 8 20:52:20 2008 +0200
12733 AT91SAM9260EK: Normalize BOOTARGS
12735 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
12736 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
12739 Signed-off-by: Stelian Pop <stelian@popies.net>
12740 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12742 commit 79f0cb6e9c54d31a1d9e3f5e226a9bebc3c3a47a
12743 Author: Stelian Pop <stelian@popies.net>
12744 Date: Thu May 8 20:52:19 2008 +0200
12746 AT91SAM9260EK: Normalize SPI timings
12748 This patch changes the SPI timings to closely match the ones
12749 used by the Linux kernel and the Atmel's own bootstrap project.
12751 Signed-off-by: Stelian Pop <stelian@popies.net>
12752 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12754 commit c1212b2f5c5ed440bf8e9ebc8e4fd7488858b935
12755 Author: Stelian Pop <stelian@popies.net>
12756 Date: Thu May 8 20:52:18 2008 +0200
12758 AT91SAM9260EK: Handle 8 or 16 bit NAND
12760 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
12761 makes the support configurable in the board config header file
12762 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
12764 Signed-off-by: Stelian Pop <stelian@popies.net>
12765 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12767 commit ab52640fc01624e208424e527af0b7b3a5a65a12
12768 Author: Stelian Pop <stelian@popies.net>
12769 Date: Thu May 8 20:52:17 2008 +0200
12771 AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMAND
12773 This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND
12774 in order to cope with the changes in DataFlash partitionning scheme
12777 Signed-off-by: Stelian Pop <stelian@popies.net>
12778 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12780 commit 3267508ec4c9e74c39ee41c9ae6951ad185fe270
12781 Author: Stelian Pop <stelian@popies.net>
12782 Date: Thu May 8 20:52:16 2008 +0200
12784 AT91CAP9ADK: Normalize BOOTARGS
12786 This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from
12787 DataFlash or from NAND), and gives to Linux a fully specified mtdparts
12790 Signed-off-by: Stelian Pop <stelian@popies.net>
12791 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12793 commit 93da48b910511911ce110656e17ed733c8ac4c45
12794 Author: Stelian Pop <stelian@popies.net>
12795 Date: Thu May 8 20:52:15 2008 +0200
12797 AT91CAP9ADK: Normalize SPI timings
12799 This patch changes the SPI timings to closely match the ones
12800 used by the Linux kernel and the Atmel's own bootstrap project.
12802 Signed-off-by: Stelian Pop <stelian@popies.net>
12803 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12805 commit 1c90df3e148ce0a3e2c86c63b38b19d47772f2a0
12806 Author: Stelian Pop <stelian@popies.net>
12807 Date: Thu May 8 20:52:14 2008 +0200
12809 AT91CAP9ADK: Handle 8 or 16 bit NAND
12811 The Atmel boards can handle 8 or 16 bit NAND memories. This patch
12812 makes the support configurable in the board config header file
12813 (CFG_NAND_DBW_8 or CFG_NAND_DBW_16).
12815 Signed-off-by: Stelian Pop <stelian@popies.net>
12816 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12818 commit 11b162bae058e96c7929e358d4adff2bee6c2cc4
12819 Author: Stelian Pop <stelian@popies.net>
12820 Date: Thu May 8 20:52:13 2008 +0200
12822 Use a common u-boot.lds file across all AT91CAP9/AT91SAM9 platforms
12824 All the AT91CAP9/AT91SAM9 boards have the same linker script. The patch
12825 below avoids the duplication of u-boot.lds by putting the file in the
12826 cpu directory instead of the board one.
12828 Signed-off-by: Stelian Pop <stelian@popies.net>
12829 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12831 commit d48abea4b89adaf5e45ea75b5e38c0d8de179ece
12832 Author: Stelian Pop <stelian@popies.net>
12833 Date: Thu May 8 20:52:12 2008 +0200
12835 Add proper copyright notices in Atmel boards Makefiles
12837 The Makefiles for the AT91CAP9/AT91SAM9 boards have an incomplete
12838 copyright notice. This patch adds the missing pieces.
12840 Signed-off-by: Stelian Pop <stelian@popies.net>
12841 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12843 commit e817a042cef6164bf26fee86f90326f2ec9e6745
12844 Author: Stelian Pop <stelian@popies.net>
12845 Date: Thu May 8 20:52:11 2008 +0200
12847 Add copyright information in Atmel boards partition.c
12849 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
12850 the new created files. This patch fixes the problem.
12852 Signed-off-by: Stelian Pop <stelian@popies.net>
12853 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12855 commit 4f6c810106f4f76d83cfc57d98f4540cd45f9a19
12856 Author: Stelian Pop <stelian@popies.net>
12857 Date: Thu May 8 20:52:10 2008 +0200
12859 Update origin and copyright information in arch-at91sam9 header files
12861 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
12862 copied from the Linux kernel sources. This patch explicitly specifies
12863 this origin for all the copied headers, and for those missing copyright
12864 information, adds it.
12866 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
12867 in the latest kernel sources by 'at91sam9_smc.h'.
12869 The copyright information has been confirmed by the AT91 Linux kernel
12870 maintainer, Andrew Victor <avictor.za@gmail.com>.
12872 Signed-off-by: Stelian Pop <stelian@popies.net>
12873 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12875 commit 79dd1712689d6a5031d7cbff54957049680751c7
12876 Author: Markus Klotzbücher <mk@denx.de>
12877 Date: Thu May 8 16:00:55 2008 +0200
12879 ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
12881 When using dhcp/bootp the "netmask" environment variable is not set
12882 because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
12883 desireable, so the following patch adds this this option to the board
12886 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
12887 Signed-off-by: Stefan Roese <sr@denx.de>
12889 commit 869d14b4cc2e47de2ddcb117bad0407a44436684
12890 Author: Stefan Roese <sr@denx.de>
12891 Date: Sat May 10 10:30:36 2008 +0200
12893 ppc4xx: Update Makalu defconfig to use device-tree booting as default
12895 This patch reworks the default environment on Makalu. Now "net_nfs" for
12896 example uses the device-tree style booting formerly know as "net_nfs_fdt".
12897 Also the addresses in RAM were changed because of the new image booting
12898 support, which check for image overwriting. So the addresses needed to
12901 Signed-off-by: Stefan Roese <sr@denx.de>
12903 commit f3612a7b199cab3942f60d9c1392eb39d58cc699
12904 Author: Becky Bruce <bgill@freescale.com>
12905 Date: Wed May 7 13:28:16 2008 -0500
12907 PPC: fix map_physmem build warning
12909 map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
12910 enabled. This quiets the warning.
12912 Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
12914 commit 36f32675f40292002ee1fed252c180a43022d2d4
12915 Author: Becky Bruce <bgill@freescale.com>
12916 Date: Wed May 7 13:24:57 2008 -0500
12918 Update pci code to use phys_addr_t
12920 Physical addrs need to be represented by phys_addr_t, not
12921 unsigned long. Otherwise, systems that use CONFIG_PHYS_64BIT
12922 are going to fail mightily.
12924 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
12926 commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
12927 Author: Nick Spence <nick.spence@freescale.com>
12928 Date: Thu May 8 22:32:22 2008 -0700
12930 Support legacy multi-type images without FDT section.
12932 This patch enables legacy multi-type images containing only a Linux kernel
12933 and root file system to be loaded, maintaining compatibility with previous
12934 versions of u-boot.
12936 This is required when using old image files such as a Linux 2.4 kernel /
12939 Signed-off-by: Nick Spence <nick.spence@freescale.com>
12940 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
12942 commit 881031d9732783b7aeae2198fc7eb480ae8974a6
12943 Author: Wolfgang Denk <wd@denx.de>
12944 Date: Sat May 10 00:38:02 2008 +0200
12948 Signed-off-by: Wolfgang Denk <wd@denx.de>
12950 commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
12951 Author: Wolfgang Denk <wd@denx.de>
12952 Date: Sat May 10 00:36:09 2008 +0200
12954 post/cpu/ppc4xx/Makefile: line length cleanup
12956 Signed-off-by: Wolfgang Denk <wd@denx.de>
12958 commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
12959 Author: Stelian Pop <stelian@popies.net>
12960 Date: Thu May 8 22:52:09 2008 +0200
12962 Fix @ -> <at> substitution
12964 When applying the AT91CAP9 patches upstream, something transformed
12965 the '@' character into the ' <at> ' sequence.
12967 The patch below restores the original form in all the places where
12968 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
12969 were copied from AT91CAP9, and a couple of other files where the
12970 ' <at> ' sequence was present).
12972 Signed-off-by: Stelian Pop <stelian@popies.net>
12974 commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
12975 Author: Stelian Pop <stelian@popies.net>
12976 Date: Thu May 8 22:52:10 2008 +0200
12978 Update origin and copyright information in arch-at91sam9 header files
12980 When doing the AT91CAP9/AT91SAM9 port, a number of header files were
12981 copied from the Linux kernel sources. This patch explicitly specifies
12982 this origin for all the copied headers, and for those missing copyright
12983 information, adds it.
12985 Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
12986 in the latest kernel sources by 'at91sam9_smc.h'.
12988 The copyright information has been confirmed by the AT91 Linux kernel
12989 maintainer, Andrew Victor <avictor.za@gmail.com>.
12991 Signed-off-by: Stelian Pop <stelian@popies.net>
12993 commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
12994 Author: Stelian Pop <stelian@popies.net>
12995 Date: Thu May 8 22:52:11 2008 +0200
12997 Add copyright information in Atmel boards partition.c
12999 When Ulf did the dataflash.c cleanup, he didn't add his copyright on
13000 the new created files. This patch fixes the problem.
13002 Signed-off-by: Stelian Pop <stelian@popies.net>
13004 commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
13005 Author: Guennadi Liakhovetski <lg@denx.de>
13006 Date: Thu May 8 10:09:27 2008 +0200
13008 mx31ads: fix 32kHz clock handling
13010 According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
13011 oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
13012 Also fix a typo when verifying a jumper configuration. While at it, make
13013 two needlessly global functions static.
13015 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
13017 commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
13018 Author: Marian Balakowicz <m8@semihalf.com>
13019 Date: Wed May 7 13:10:04 2008 +0200
13021 Avoid initrd and logbuffer area overlaps
13023 Add logbuffer to reserved LMB areas to prevent initrd allocation
13024 from overlaping with it.
13026 Make sure to use correct logbuffer base address.
13028 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13030 commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
13031 Author: Marian Balakowicz <m8@semihalf.com>
13032 Date: Wed May 7 13:08:54 2008 +0200
13034 ppc: Cleanup get_effective_memsize() use
13036 Removed duplicated effective memory size calculation code.
13038 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13040 commit 273c37d843d5b581090378016cd12dd9c586907b
13041 Author: Marian Balakowicz <m8@semihalf.com>
13042 Date: Wed May 7 09:03:53 2008 +0200
13044 Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
13046 Recent modifcations to LOGBUFFER handling code were incorrecly
13047 introduced to fit_check_kernel() routine during
13048 "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
13049 commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
13051 This patch cleans up this merge issue.
13053 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
13055 commit bc11756daff89a3de09ca80adac962b88cf06e6e
13056 Author: Grant Erickson <gerickson@nuovations.com>
13057 Date: Tue May 6 20:16:15 2008 -0700
13059 Propagate Error Status to the Shell on fw_printenv Errors
13061 Changed implementation such that fw_printenv returns failure status
13062 when one or more specified variables do not exist or when incorrect
13063 command syntax is used.
13065 This aids scripting fw_printenv such that the script can key of the
13066 return status rather than relying on standard error "scraping".
13068 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13069 Signed-off-by: Wolfgang Denk <wd@denx.de>
13071 commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
13072 Author: Grant Erickson <gerickson@nuovations.com>
13073 Date: Tue May 6 16:18:00 2008 -0700
13075 Fix Compilation Errors with 'tools/env/fw_printenv'
13077 In the current top-of-tree, 1.3.3.-rc2, the optional tool
13078 'tools/env/fw_printenv' fails to compile for two reasons:
13080 1) The header watchdog.h cannot be found.
13081 2) The header zlib.h is picked up from the tool chain rather than the
13082 project causing a prototype conflict for crc32.
13084 This patch addresses both of these issues.
13086 Platforms Tested On:
13089 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13091 commit 597f6c26a18b389903a64692bacbf9a1ca69355b
13092 Author: James Yang <James.Yang@freescale.com>
13093 Date: Mon May 5 10:22:53 2008 -0500
13095 Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
13097 When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
13098 work before relocating to RAM because command history is written into
13099 a global array that is not writable before relocation. This patch
13100 defers to the no-editing and no-history code in readline_into_buffer()
13101 if it is called before relocation.
13103 Signed-off-by: James Yang <James.Yang@freescale.com>
13104 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13106 commit 726c0f1e5f108dccea052965123b95837d2bd402
13107 Author: Detlev Zundel <dzu@denx.de>
13108 Date: Mon May 5 16:11:22 2008 +0200
13110 cosmetic: Adjust coding style for switch statements to be consistent
13112 Signed-off-by: Detlev Zundel <dzu@denx.de>
13114 commit 574b319512b13e10800f0045e39b993f4ca25e42
13115 Author: Detlev Zundel <dzu@denx.de>
13116 Date: Mon May 5 16:11:21 2008 +0200
13118 Fix disk type output in disk/part.c
13120 Signed-off-by: Detlev Zundel <dzu@denx.de>
13122 commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
13123 Author: Vlad Lungu <vlad.lungu@windriver.com>
13124 Date: Mon May 5 14:20:03 2008 +0300
13126 Mail address change, documentation modified
13128 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
13130 commit 4d49b28038e2819088e8356a77212fc95a89ce5a
13131 Author: Michal Simek <monstr@monstr.eu>
13132 Date: Sun May 4 15:42:41 2008 +0200
13134 microblaze: Repare intc handling
13136 Signed-off-by: Michal Simek <monstr@monstr.eu>
13138 commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
13139 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13140 Date: Sun May 4 15:17:52 2008 +0200
13142 include/gitignore: update to all architectures
13144 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13146 commit 1df368aed3b8bc240fe1595d290b0e91b22961da
13147 Author: Marcel Ziswiler <marcel@ziswiler.com>
13148 Date: Mon May 5 02:12:06 2008 +0200
13150 ide: Remove spurious second include of io.h
13152 Removed the second include, with all the #ifdef around as suggested by Wolfgang.
13154 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13156 commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
13157 Author: Adrian Filipi <adrian.filipi@eurotech.com>
13158 Date: Tue May 6 16:46:37 2008 -0400
13162 This patch fixes three typos.
13163 The first is a repetition of CONFIG_CMD_BSP.
13164 The second makes the #endif comment match its #if.
13165 The third is a spelling error.
13167 Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
13169 commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
13170 Author: Grant Erickson <gerickson@nuovations.com>
13171 Date: Sun May 4 16:45:01 2008 -0700
13173 Recognize 'powerpc' As an Alias for IH_ARCH_PPC
13175 Add support for the recognition of 'powerpc' as an alias for the PowerPC
13176 architecture type since Linux is already trending in that direction,
13177 preferring 'powerpc' to 'ppc'.
13179 Signed-off-by: Grant Erickson <gerickson@nuovations.com>
13181 commit f5a24259190c388c2527bdc49fee34577d862cc7
13182 Author: Wheatley Travis <Travis.Wheatley@freescale.com>
13183 Date: Fri May 2 13:35:15 2008 -0700
13185 7450 and 86xx L2 cache invalidate bug corrections
13187 The 7610 and related parts have an L2IP bit in the L2CR that is
13188 monitored to signal when the L2 cache invalidate is complete whereas the
13189 7450 and related parts utilize L2I for this purpose. However, the
13190 current code does not account for this difference. Additionally the 86xx
13191 L2 cache invalidate code used an "andi" instruction where an "andis"
13192 instruction should have been used.
13194 This patch addresses both of these bugs.
13196 Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
13197 Acked-By: Jon Loeliger <jdl@freescale.com>
13199 commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
13200 Author: Wolfgang Denk <wd@denx.de>
13201 Date: Fri May 9 10:16:13 2008 +0200
13203 Avoid infinite loop "Generating include/autoconf.mk"
13205 Fix a bogus circular dependency that caused an infinite loop of
13206 "Generating include/autoconf.mk" again and again.
13208 Signed-off-by: Wolfgang Denk <wd@denx.de>
13210 commit 567fb852178dbf59529d7301620a3f3732a4b02d
13211 Author: Stelian Pop <stelian@popies.net>
13212 Date: Thu May 8 22:52:09 2008 +0200
13214 Fix @ -> <at> substitution
13216 When applying the AT91CAP9 patches upstream, something transformed
13217 the '@' character into the ' <at> ' sequence.
13219 The patch below restores the original form in all the places where
13220 it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
13221 were copied from AT91CAP9, and a couple of other files where the
13222 ' <at> ' sequence was present).
13224 Signed-off-by: Stelian Pop <stelian@popies.net>
13225 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13227 commit 73ccb3410a0785593cda7aee455dfc51f790e281
13228 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
13229 Date: Mon Apr 28 14:04:32 2008 +0200
13231 ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based board
13233 Signed-off-by: Gary Jennejohn <garyj@denx.de>
13234 Signed-off-by: Stefan Roese <sr@denx.de>
13236 commit ef2642625cbfb1c3695e3478d08ae515052a4950
13237 Author: Stefan Roese <sr@denx.de>
13238 Date: Thu May 8 11:10:46 2008 +0200
13240 ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
13242 Signed-off-by: Stefan Roese <sr@denx.de>
13244 commit a00eccfebc954ad9485161efeca7d9aaf626d530
13245 Author: Stefan Roese <sr@denx.de>
13246 Date: Thu May 8 11:05:15 2008 +0200
13248 ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
13250 This patch adds fdt (flattened device tree) support to all remaining AMCC
13251 eval boards. Most newer boards already support device tree. With this patch,
13252 all AMCC boards now enable device tree passing from U-Boot to Linux
13253 arch/powerpc kernels.
13255 Signed-off-by: Stefan Roese <sr@denx.de>
13257 commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
13258 Author: Stefan Roese <sr@denx.de>
13259 Date: Thu May 8 11:01:09 2008 +0200
13261 ppc4xx: Add weak default ft_board_setup() routine
13263 This patch adds a default ft_board_setup() routine to the 4xx fdt code.
13264 This routine is defined as weak and can be overwritten by a board specific
13267 Signed-off-by: Stefan Roese <sr@denx.de>
13269 commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
13270 Author: Stefan Roese <sr@denx.de>
13271 Date: Thu May 8 10:48:58 2008 +0200
13273 ppc4xx: acadia: Add fdt support and fix section overlap problem
13275 This patch adds fdt (flattened device tree) support to the AMCC
13276 Acadia eval board. This increases the image size and it doesn't
13277 fit anymore into 256kByte. Since we didn't want to remove features
13278 from the configuration, we decided to increase the U-Boot image size
13279 (add one flash sector).
13281 Also changed the default environment definition to make it
13282 independent of such changes.
13284 Signed-off-by: Stefan Roese <sr@denx.de>
13286 commit 4adb3023de75bc150f088c8935db340930ad38c8
13287 Author: Ira Snyder <iws@ovro.caltech.edu>
13288 Date: Tue Apr 29 11:18:54 2008 -0700
13290 ppc4xx: Add device tree support to AMCC Yosemite
13292 Add support for booting with a device tree blob. This is needed to boot
13293 ARCH=powerpc kernels. Also add support for setting the eth0 mac address
13294 via the ethaddr variable.
13296 Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
13297 Signed-off-by: Stefan Roese <sr@denx.de>
13299 commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
13300 Author: Dave Mitchell <dmitchell@amcc.com>
13301 Date: Wed May 7 09:00:23 2008 -0700
13303 ppc4xx: Fix typos in 460GT/EX FBDV array
13305 Corrected two typos in the 460GT/EX FBDV array.
13307 Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
13308 Signed-off-by: Stefan Roese <sr@denx.de>
13310 commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
13311 Author: Andy Fleming <afleming@freescale.com>
13312 Date: Wed May 7 16:54:31 2008 -0500
13314 85xx: Limit CPU2 workaround to parts that have the errata
13316 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
13317 Signed-off-by: Andy Fleming <afleming@freescale.com>
13319 commit a5fe514e8ace564300d2c1d73846ddff49654243
13320 Author: Lee Nipper <lee.nipper@freescale.com>
13321 Date: Fri Apr 25 15:44:45 2008 -0500
13323 mpc83xx: system performance settings for MPC8349EMDS.
13325 These same settings are used on MPC8349ITX, and
13326 improve performance on MPC8349EMDS.
13328 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
13329 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
13331 commit 49387dba910e485640b575e920ee463b7e611dc3
13332 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13333 Date: Tue May 6 13:22:52 2008 +0900
13335 [MIPS] cpu/mips/cache.S: Fix build warning
13337 Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
13338 warns illegal global symbol references by bal (and jal also) instruction.
13339 This does not happen with the latest binutils v2.18.
13341 Here's an example on gth2_config:
13343 mips_4KC-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
13344 stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
13345 c -EB -c -o cache.o cache.S
13346 cache.S: Assembler messages:
13347 cache.S:243: Warning: Pretending global symbol used as branch target is local.
13348 cache.S:250: Warning: Pretending global symbol used as branch target is local.
13350 In principle, gas might be sensitive to global symbol references in PIC
13351 code because they should be processed through GOT (global offset table).
13352 But if `bal' instruction is used, it results in PC-based offset jump.
13353 This is the cause of this warning.
13355 In practice, we know it doesn't matter whether PC-based reference or GOT-
13356 based. As for this case, both will work before/after relocation. But let's
13359 This patch explicitly sets up a target address, then jump there.
13360 Here's an example of disassembled code with/without this patch.
13362 90000668: 1485ffef bne a0,a1,90000628 <mips_cache_reset+0x20>
13363 9000066c: ac80fffc sw zero,-4(a0)
13364 90000670: 01402821 move a1,t2
13365 -90000674: 0411ffba bal 90000560 <mips_init_icache>
13366 -90000678: 01803021 move a2,t4
13367 -9000067c: 01602821 move a1,t3
13368 -90000680: 0411ffcc bal 900005b4 <mips_init_dcache>
13369 -90000684: 01a03021 move a2,t5
13370 -90000688: 03000008 jr t8
13371 -9000068c: 00000000 nop
13372 +90000674: 01803021 move a2,t4
13373 +90000678: 8f8f83ec lw t7,-31764(gp)
13374 +9000067c: 01e0f809 jalr t7
13375 +90000680: 00000000 nop
13376 +90000684: 01602821 move a1,t3
13377 +90000688: 01a03021 move a2,t5
13378 +9000068c: 8f8f81e0 lw t7,-32288(gp)
13379 +90000690: 01e0f809 jalr t7
13380 +90000694: 00000000 nop
13381 +90000698: 03000008 jr t8
13382 +9000069c: 00000000 nop
13384 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13386 commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
13387 Author: Vlad Lungu <vlad.lungu@windriver.com>
13388 Date: Mon May 5 14:04:00 2008 +0300
13390 Allow building mips versions with ELDK 3.1.1
13392 .gpword works only with local symbols on certain binutils versions
13394 Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
13396 commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
13397 Author: Wolfgang Denk <wd@denx.de>
13398 Date: Mon May 5 12:52:36 2008 +0200
13400 MAKEALL: add inka4x0 board
13402 Signed-off-by: Wolfgang Denk <wd@denx.de>
13404 commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
13405 Author: Wolfgang Denk <wd@denx.de>
13406 Date: Sun May 4 21:34:23 2008 +0200
13408 kb9202 board: fix build problem.
13410 Signed-off-by: Wolfgang Denk <wd@denx.de>
13412 commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
13413 Author: Wolfgang Denk <wd@denx.de>
13414 Date: Sun May 4 12:10:33 2008 +0200
13416 Prepare for v1.3.3-rc3
13418 Update ChNAGELOG, minor white space cleanup.
13420 Signed-off-by: Wolfgang Denk <wd@denx.de>
13422 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
13423 Author: Wolfgang Denk <wd@denx.de>
13424 Date: Sun May 4 00:35:15 2008 +0200
13426 drivers/net/tsec.c: Fix typo.
13428 Signed-off-by: Wolfgang Denk <wd@denx.de>
13430 commit aa737945e6f37a5de5dbad550a7694e0cb2a8120
13431 Author: Mike Frysinger <vapier@gentoo.org>
13432 Date: Fri May 2 21:45:12 2008 -0400
13434 version_autogenerated.h: use printf rather than echo -n
13436 Some systems are dumb and do not implement the -n flag to echo (like OS X).
13437 Convert the Makefile to use printf as this should work everywhere.
13439 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13440 Signed-off-by: Wolfgang Denk <wd@denx.de>
13442 commit 4acc2a108ad0a669165924704a6cb083f9138242
13443 Author: Mike Frysinger <vapier@gentoo.org>
13444 Date: Fri May 2 18:17:50 2008 -0400
13446 fix building when saveenv is disabled in some setups
13448 If you enable environment in the flash, but disable the embedded
13449 option, and you disable the saveenv command, then the #if nested
13450 logic will trigger a compile failure:
13451 env_flash.c: In function 'env_relocate_spec':
13452 env_flash.c:399: error: 'flash_addr' undeclared (first use in this function)
13453 The fix is to add CMD_SAVEENV ifdef protection like everywhere else.
13455 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13457 commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7
13458 Author: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
13459 Date: Fri May 2 16:10:04 2008 -0400
13461 SBC8548: fix address mask to allow 64M flash
13463 Fix incorrect mask to enable all 64MB of onboard flash.
13464 Previously U-Boot incorrectly mapped only 8MB of flash, this
13465 patch correctly maps all the available flash.
13467 Signed-off-by: Jeremy McNicoll <jeremy.mcnicoll@windriver.com>
13469 commit 3648085c464c8c22ef76fab006ca4344d3796124
13470 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13471 Date: Fri May 2 19:48:56 2008 +0200
13473 qemu_mips: add README
13475 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13477 commit 6fdd002689190a0022c7b3dbab37fcba724580ce
13478 Author: Marcel Ziswiler <marcel@ziswiler.com>
13479 Date: Fri May 2 02:35:59 2008 +0200
13481 Fix misspelled comment
13483 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13485 commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1
13486 Author: Mike Frysinger <vapier@gentoo.org>
13487 Date: Thu May 1 04:13:05 2008 -0400
13489 mkimage: make mmap() checks consistent
13491 The mmap() related code is full of inconsistent casts/constants when
13492 it comes to error checking, and may break when building on some
13493 systems (like ones that do not implicitly define the caddr_t type).
13494 Let's just avoid the whole mess by writing the code nice and clean in
13497 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
13499 commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a
13500 Author: Marcel Ziswiler <marcel@ziswiler.com>
13501 Date: Thu May 1 09:05:34 2008 +0200
13503 Fix defined but not used build warning
13505 - warning: 'srom' defined but not used
13507 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13509 commit b71190f3250aaffcc81c35f6cfd3498cb7c48013
13510 Author: Marcel Ziswiler <marcel@ziswiler.com>
13511 Date: Thu May 1 09:05:26 2008 +0200
13513 Fix implicit declaration build warnings
13515 - warning: implicit declaration of function ‘serial_initialize’
13517 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
13519 commit 9acde129cc3f9c1b3bc11a821480dd446774d618
13520 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
13521 Date: Tue Apr 29 19:18:32 2008 +0200
13523 TSEC: add config options for VSC8601 RGMII PHY
13525 The Vitesse VSC8601 RGMII PHY has internal delay for both Rx
13526 and Tx clock lines. They are configured using 2 bits in extended
13528 Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have
13529 been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay.
13531 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
13532 Acked-by: Andy Fleming <afleming@freescale.com>
13533 Acked-by: Ben Warren <biggerbadderben@gmail.com>
13536 drivers/net/tsec.c | 6 ++++++
13537 drivers/net/tsec.h | 3 +++
13538 2 files changed, 9 insertions(+), 0 deletions(-)
13540 commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8
13541 Author: Wolfgang Denk <wd@denx.de>
13542 Date: Sat May 3 23:07:15 2008 +0200
13544 Revert "ColdFire: Get information from the correct GCC"
13546 This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
13547 (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40).
13549 commit c4e5f52a58d278eebb87f476e353972c5dacea40
13550 Author: Wolfgang Denk <wd@denx.de>
13551 Date: Sat May 3 22:25:00 2008 +0200
13553 config.mk: use correct (cross) compiler
13555 Some config.mk files reference $(CC) to test for specific tool chain
13556 features, so make sure $(CC) gets set before including any such
13559 This patch replaces commit b7166e05a5 ("ColdFire: Get information from
13562 Signed-off-by: Wolfgang Denk <wd@denx.de>
13564 commit 27c38689d0cfde0e444239345f97b5eecc9f4067
13565 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13566 Date: Thu May 1 02:13:44 2008 +0200
13568 pxa: fix previous definition on cpu init
13570 start.S:183:1: warning: "ICMR" redefined
13571 In file included from start.S:33:
13572 include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition
13573 start.S:187:1: warning: "RCSR" redefined
13576 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13578 commit 6d12e697de794d700767f22f950e3026ccf4daf6
13579 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13580 Date: Thu May 1 02:13:43 2008 +0200
13582 pxa: fix pcmcia operation on 'i' may be undefined
13584 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13585 Signed-off-by: Wolfgang Denk <wd@denx.de>
13587 commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f
13588 Author: Kumar Gala <galak@kernel.crashing.org>
13589 Date: Wed Apr 30 16:24:35 2008 -0500
13591 MPC8610HPCD: Drop -O2 from the build flags
13593 Make the flags use -Os like all other boards
13595 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13597 commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd
13598 Author: Stefan Roese <sr@denx.de>
13599 Date: Wed Apr 30 15:50:39 2008 +0200
13601 RTC: Fix month offset by one problem in M41T62 RTC driver
13603 This patch fixes a problem with the month being read and written
13604 incorrectly (offset by one). This only gets visible by also using
13605 the Linux driver (rtc-m41t80).
13607 Tested on AMCC Canyonlands.
13609 Signed-off-by: Stefan Roese <sr@denx.de>
13611 commit 141ba1cad8e6598a2466e7e2976c6a12285df619
13612 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13613 Date: Sat May 3 13:51:44 2008 +0900
13615 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
13617 Current trick to pick up GNU assembler minor version uses a dot(.) as a
13618 delimiter, and take the second field to obtain minor version number. But
13619 as can be expected, this doesn't work with a version string which has
13620 dots more than needs.
13624 $ mips-linux-gnu-as --version | grep 'GNU assembler'
13625 GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215
13626 $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2
13630 This patch restricts the version format to 2.XX.XX... This will work
13633 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+'
13635 $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2
13639 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13641 commit ea638951acead7f1086c908c0b9f086beab82a22
13642 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13643 Date: Sat May 3 13:51:28 2008 +0900
13645 [MIPS] cpu/mips/cache.S: Add dcache_enable
13647 Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482,
13648 "allow ports to override bootelf behavior") requires ports to have this
13651 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
13652 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13654 commit d2c6fbec4397c936b18cd42482b6973cd6781bdf
13655 Author: Wolfgang Denk <wd@denx.de>
13656 Date: Thu May 1 21:30:16 2008 +0200
13658 onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts
13660 Onenand needs a version of memcpy() which performs 16 bit accesses
13661 only; make sure the name does not conflict with the standard
13664 Signed-off-by: Wolfgang Denk <wd@denx.de>
13666 commit 12bc4e94251c369c529ffa505cf58b148c372f7f
13667 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13668 Date: Wed Apr 30 22:38:17 2008 +0200
13670 cmd_nand: fix warning: str2long ncompatible pointer type
13672 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
13674 commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd
13675 Author: Timur Tabi <timur@freescale.com>
13676 Date: Fri Apr 4 11:16:11 2008 -0500
13678 Fix calculation of I2C clock for some 86xx chips
13680 Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2.
13681 There is no pattern that can be used to determine which chips use which
13682 frequency, so the only way to determine is to look up the actual SOC
13683 designation and use the right value for that SOC.
13685 Signed-off-by: Timur Tabi <timur@freescale.com>
13687 commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9
13688 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13689 Date: Wed Apr 30 12:11:19 2008 -0500
13691 ColdFire: Fix ethernet hang issue for mcf547x_8x
13693 The ethernet hang is caused by receiving buffer in DRAM is not
13694 yet ready due to access cycles require longer time in DRAM.
13695 Relocate DMA buffer descriptors from DRAM to internal SRAM.
13697 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13699 commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca
13700 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13701 Date: Wed Apr 30 12:10:47 2008 -0500
13703 ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c
13705 Signed-off-by: Luigi Comio Mantellini <luigi.mantellini@idf-hit.com>
13706 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13708 commit b7166e05a513c0806b63b9dfb6f1d77645cede2a
13709 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13710 Date: Wed Apr 30 12:10:23 2008 -0500
13712 ColdFire: Get information from the correct GCC
13714 Signed-off-by: Kurt Mahan <kmahan@freescale.com>
13715 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
13717 commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9
13718 Author: dirk.behme@googlemail.com <dirk.behme@googlemail.com>
13719 Date: Wed Apr 30 18:02:59 2008 +0200
13721 Fix warning in env_nand.c if compiled for DaVinci Schmoogie
13725 nv_nand.c: In function 'saveenv':
13726 env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type
13727 env_nand.c: In function 'env_relocate_spec':
13728 env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type
13730 if compiled for davinci_schmoogie_config.
13732 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
13733 Ack by: Sergey Kubushyn <ksi@koi8.net>
13735 commit 33a4a70d48d622cc4950c60a84fec23b9421f23e
13736 Author: Anatolij Gustschin <agust@denx.de>
13737 Date: Wed Apr 30 13:34:40 2008 +0200
13739 Fix warnings while compiling net/net.c for MPC8610HPCD board
13741 MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS
13742 causing overriding default -Os option. New gcc (ver. 4.2.2)
13743 produces warnings while compiling net/net.c file with -O2
13744 option. The patch is an attempt to fix this.
13746 Signed-off-by: Anatolij Gustschin <agust@denx.de>
13748 commit 58b575e575c25fdf8c88141e145db201f3092149
13749 Author: Sascha Laue <Sascha.Laue@gmx.biz>
13750 Date: Wed Apr 30 15:23:38 2008 +0200
13752 lwmon5: fix offset error in sysmon0 POST
13754 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
13755 Signed-off-by: Wolfgang Denk <wd@denx.de>
13757 commit e7419b243a373de4ee042f7d4f45f66de787240d
13758 Author: Sascha Laue <Sascha.Laue@gmx.biz>
13759 Date: Wed Apr 30 15:16:35 2008 +0200
13761 lwmon5: fix manual merge error in POST
13763 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
13765 commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a
13766 Author: Wolfgang Denk <wd@denx.de>
13767 Date: Wed Apr 30 17:46:26 2008 +0200
13769 cmd_nand.c: fix another 'incompatible pointer type' warning.
13771 Signed-off-by: Wolfgang Denk <wd@denx.de>
13773 commit de109d909707e2dfe806be5efc3cdb103b47c8ad
13774 Author: Wolfgang Denk <wd@denx.de>
13775 Date: Wed Apr 30 17:25:07 2008 +0200
13777 Makefile: fix parallel builds
13779 This problem shows up with parallel builds only; it results in
13780 somewhat cryptic error messages like
13782 $ JOBS=-j6 MAKEALL netstar
13783 Configuring for netstar board...
13784 arm-linux-ld: cannot find -lgeneric
13785 make[1]: *** [eeprom.srec] Error 1
13787 A few boards (like netstar and voiceblue) need some libraries for
13788 building; however, the board Makefile does not contain any such
13789 dependencies which may cause problems with parallel builds. Adding
13790 such dependencies is difficult as we would also have to provide build
13791 rules, which already exist in the respective library Makefiles.
13793 To solve this, we make sure that all libraries get built before the
13796 Signed-off-by: Wolfgang Denk <wd@denx.de>
13798 commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f
13799 Author: Stefan Roese <sr@denx.de>
13800 Date: Wed Apr 30 14:51:36 2008 +0200
13802 ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module
13804 This patch changes the Canyonlands/Glacier fixed DDR2 controller setup
13805 used for NAND booting to match the values needed for the new 512MB
13806 DIMM modules shipped with the productions boards:
13808 Crucial: CT6464AC667.8FB
13810 Signed-off-by: Stefan Roese <sr@denx.de>
13812 commit ea9202a659dc75996facf1475f1866a19a9d3129
13813 Author: Stefan Roese <sr@denx.de>
13814 Date: Wed Apr 30 10:49:43 2008 +0200
13816 ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c
13818 This patch fixes a problem with DIMMs that have 8 banks. Now the
13819 MCIF0_MBxCF register will be setup correctly for this setup too.
13821 This was noticed with the 512MB DIMM on Canyonlands/Glacier.
13823 Signed-off-by: Stefan Roese <sr@denx.de>
13825 commit 76617299358ebba260ecc02d33e8e75d8d13dd3b
13826 Author: Wolfgang Denk <wd@denx.de>
13827 Date: Tue Apr 29 23:41:06 2008 +0200
13829 Prepare v1.3.3-rc2, again.
13831 Signed-off-by: Wolfgang Denk <wd@denx.de>
13833 commit b7fcc4c13993782342cf5cd20d237a6281648a0b
13834 Author: Wolfgang Denk <wd@denx.de>
13835 Date: Tue Apr 29 23:35:24 2008 +0200
13839 Signed-off-by: Wolfgang Denk <wd@denx.de>
13841 commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4
13842 Author: Wolfgang Denk <wd@denx.de>
13843 Date: Tue Apr 29 23:32:20 2008 +0200
13845 common/env_nand.c: fix one more incompatible pointer type issue
13847 Signed-off-by: Wolfgang Denk <wd@denx.de>
13849 commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f
13850 Author: Wolfgang Denk <wd@denx.de>
13851 Date: Tue Apr 29 21:33:08 2008 +0200
13853 post/board/lwmon5/sysmon.c: fix manual merge error.
13855 Signed-off-by: Wolfgang Denk <wd@denx.de>
13857 commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a
13858 Author: Kumar Gala <galak@kernel.crashing.org>
13859 Date: Tue Apr 29 12:54:59 2008 -0500
13861 85xx: Add -mno-spe to e500/85xx builds
13863 Newer gcc's might be configured to enable autovectorization by default.
13864 If we happen to build with one of those compilers we will get SPE
13865 instructions in random code.
13867 -mno-spe disables the compiler for automatically generating SPE
13868 instructions without our knowledge.
13870 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13872 commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5
13873 Author: Kumar Gala <galak@kernel.crashing.org>
13874 Date: Tue Apr 29 10:18:34 2008 -0500
13876 Update .gitignore for zlib.h
13878 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13880 commit 45239cf4152109caa925145ccd433529902df887
13881 Author: Kumar Gala <galak@kernel.crashing.org>
13882 Date: Tue Apr 29 10:27:08 2008 -0500
13884 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs
13886 All the 85xx and 86xx UM describe the register as timing_cfg_3
13889 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13891 commit ef7d30b14394e4c4a153118f5845760cadada02a
13892 Author: Kumar Gala <galak@kernel.crashing.org>
13893 Date: Tue Apr 29 10:28:34 2008 -0500
13895 85xx/86xx: Rename DDR init address and init extended address register
13897 Rename init_addr and init_ext_addr to match the docs between
13898 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'.
13900 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13902 commit cf6cc014270549684873a5972d2595052c468cb6
13903 Author: Kumar Gala <galak@kernel.crashing.org>
13904 Date: Mon Apr 28 02:24:04 2008 -0500
13906 85xx: Additional fixes and cleanup of MP code
13908 * adjust __spin_table alignment to match ePAPR v0.94 spec
13909 * loop over all cpus when determing who is up. This fixes an issue if
13910 the "boot cpu" isn't core0. The "boot cpu" will already be in the
13911 cpu_up_mask so there is no harm
13912 * Added some protection in the code to ensure proper behavior. These
13913 changes are explicitly needed but don't hurt:
13914 - Added eieio to ensure the "hot word" of the table is written after
13915 all other table updates have occurred.
13916 - Added isync to ensure we don't prefetch loading of table entries
13917 until we a released
13919 These issues we raised by Dave Liu.
13921 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
13923 commit b2d527a8b9fb50afccbaf79b5540952585cdc760
13924 Author: Yuri Tikhonov <yur@emcraft.com>
13925 Date: Tue Apr 29 15:06:41 2008 +0200
13927 lwmon5: minor clean-up to include/configs/lwmon5.h
13929 LWMON5 DSPIC POST uses the watch-dog scratch register. So, make
13930 the CFG_DSPIC_TEST_ADDR definition more readable.
13932 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
13934 commit f4c4d21a885ccc222fd0acdf653b683249e85117
13935 Author: Stefan Roese <sr@denx.de>
13936 Date: Tue Apr 29 16:08:05 2008 +0200
13938 ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time
13940 Signed-off-by: Stefan Roese <sr@denx.de>
13942 commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8
13943 Author: Yuri Tikhonov <yur@emcraft.com>
13944 Date: Tue Apr 29 13:32:45 2008 +0200
13946 ppc flush_cache: add watch-dog triggering into the loops.
13948 Some boards (e.g. lwmon5) need rather a frequent watch-dog
13949 kicking. Since the time it takes for the flush_cache() function
13950 to complete its job depends on the size of data being flushed, one
13951 may encounter watch-dog resets on such boards when, for example,
13952 download big files over ethernet.
13954 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
13956 commit cab99d6f3281ab6784feccf98b9b425daa58418a
13957 Author: Stefan Roese <sr@denx.de>
13958 Date: Tue Apr 29 14:44:54 2008 +0200
13960 ppc4xx: Fix compilation warning in denali_spd_ddr2.c
13962 Signed-off-by: Stefan Roese <sr@denx.de>
13964 commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70
13965 Author: Stefan Roese <sr@denx.de>
13966 Date: Tue Apr 29 14:12:07 2008 +0200
13968 ppc4xx: Fix Katmai CFG_MONITOR_LEN
13970 Signed-off-by: Stefan Roese <sr@denx.de>
13972 commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7
13973 Author: Stefan Roese <sr@denx.de>
13974 Date: Tue Apr 29 13:57:07 2008 +0200
13976 ppc4xx: Complete remove bogus dflush()
13978 Since the current dflush() implementation is know to have some problems
13979 (as seem on lwmon5 ECC init) this patch removes it completely and replaces
13980 it by using clean_dcache_range().
13982 Tested on Katmai with ECC DIMM.
13984 Signed-off-by: Stefan Roese <sr@denx.de>
13986 commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc
13987 Author: Stefan Roese <sr@denx.de>
13988 Date: Tue Apr 29 13:36:51 2008 +0200
13990 ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range()
13992 As it seems the "old" ECC initialization routine by using dflush() didn't
13993 write all lines in the dcache back to memory on lwmon5. This could lead
13994 to ECC error upon Linux booting. This patch changes the program_ecc()
13995 routine to now use clean_dcache_range() instead of dflush().
13996 clean_dcache_range() uses dcbst which is exactly what we want in this
13999 Since dflush() is known is cause problems, this routine will be
14000 removed completely and replaced by clean_dcache_range() with an
14003 Signed-off-by: Stefan Roese <sr@denx.de>
14005 commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757
14006 Author: Yuri Tikhonov <yur@emcraft.com>
14007 Date: Mon Apr 28 18:19:34 2008 +0200
14009 POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs.
14011 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14013 commit eea5a743a2193ef2a05b9bc6dc447ba241416f35
14014 Author: Markus Brunner <super.firetwister@googlemail.com>
14015 Date: Mon Apr 28 08:47:47 2008 +0200
14017 ppc4xx: Fixup ebc clock in FDT for 405GP/EP
14019 On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb
14020 and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc
14023 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
14025 commit 2ef7503a593c77a80c2a054011970227c4b62774
14026 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14027 Date: Thu Apr 24 07:57:17 2008 +0200
14029 NE2000: Fix regresssion introduced by e710185aae90 on non AX88796
14031 Move non-inlied functions into specific drivers file
14032 Set get_prom as weak
14034 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14035 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14036 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14038 commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b
14039 Author: Guennadi Liakhovetski <lg@denx.de>
14040 Date: Thu Apr 3 17:04:19 2008 +0200
14042 net: make ARP timeout configurable
14044 Currently the timeout waiting for an ARP reply is hard set to 5 seconds.
14045 On i.MX31ADS due to a hardware "strangeness" up to four first IP packets
14046 to the boards get lost, which typically are ARP replies. By configuring
14047 the timeout to a lower value we significantly improve the first network
14048 transfer time on this board. The timeout is specified in milliseconds,
14049 later internally it is converted to deciseconds, because it has to be
14050 converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on
14053 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14054 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14056 commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1
14057 Author: Guennadi Liakhovetski <lg@denx.de>
14058 Date: Thu Apr 3 13:36:18 2008 +0200
14060 minor cs8900 driver clean up
14062 Remove a redundant register definition, clean up some coding style
14065 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14066 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
14068 commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10
14069 Author: Wolfgang Denk <wd@denx.de>
14070 Date: Mon Apr 28 22:01:04 2008 +0200
14072 jffs2_1pass.c: fix incompatible pointer type warning
14074 Signed-off-by: Wolfgang Denk <wd@denx.de>
14076 commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9
14077 Author: Sascha Laue <Sascha.Laue@gmx.biz>
14078 Date: Tue Apr 1 10:10:18 2008 +0200
14080 lwmon5: update dsPIC POST spezification
14082 The specification for the lwmon5 board dsPIC POST got changed.
14083 Also add defines for the temperatures and voltages.
14085 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
14087 commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7
14088 Author: Sascha Laue <Sascha.Laue@gmx.biz>
14089 Date: Tue Apr 1 15:13:03 2008 +0200
14091 Fix watchdog POST for lwmon5
14093 If the hardware watchdog detects a voltage error, the watchdog sets
14094 GPIO62 to low. The watchdog POST has to detect this low level.
14096 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
14097 Signed-off-by: Wolfgang Denk <wd@denx.de>
14099 commit dd5748bcd669f46aeb6686c1b341323843738ccc
14100 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14101 Date: Mon Apr 28 14:37:14 2008 +0200
14103 rtl8169: fix compiler warnings
14105 Fix multiple compiler warnings related to argument type mismatch.
14107 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14109 commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1
14110 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14111 Date: Mon Apr 28 14:36:06 2008 +0200
14113 IDE: fix compiler warnings
14115 The IDE driver can use 32-bit addresses in LBA mode, in which case it
14116 spits multiple warnings during compilation. Fix them.
14118 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14120 commit db9084de28c46ac81c8f681722cb0d7411be4d7f
14121 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14122 Date: Mon Apr 28 14:35:57 2008 +0200
14124 LinkStation: fix compiler warning, add a maintainer
14126 out_8 wants a pointer to an unsigned as the first argument. Add a
14127 maintainer for Linkstation boards.
14129 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
14131 commit c71abba3cb67b063f789f17abf6c7447727c0cd5
14132 Author: Wolfgang Denk <wd@denx.de>
14133 Date: Mon Apr 28 14:55:12 2008 +0200
14135 cmd_nand.c: fix "differ in signedness" problem
14137 Signed-off-by: Wolfgang Denk <wd@denx.de>
14139 commit f2c288a35341ad02ac03b1563d786763c9c8f159
14140 Author: Wolfgang Denk <wd@denx.de>
14141 Date: Mon Apr 28 12:48:47 2008 +0200
14143 pcnet.c: fix a merge issue
14145 Signed-off-by: Wolfgang Denk <wd@denx.de>
14147 commit 4ca79f477ebd25a6872e6196d80e2f5eff441376
14148 Author: Wolfgang Denk <wd@denx.de>
14149 Date: Mon Apr 28 12:08:18 2008 +0200
14151 NAND: fix some strict-aliasing compiler warnings
14153 Signed-off-by: Wolfgang Denk <wd@denx.de>
14155 commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115
14156 Author: Stefan Roese <sr@denx.de>
14157 Date: Mon Apr 28 11:37:14 2008 +0200
14159 ppc4xx: Fix compile warning of hcu4 board
14161 Signed-off-by: Stefan Roese <sr@denx.de>
14163 commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1
14164 Author: Wolfgang Denk <wd@denx.de>
14165 Date: Mon Apr 28 11:31:23 2008 +0200
14167 MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom'
14169 Signed-off-by: Wolfgang Denk <wd@denx.de>
14171 commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59
14172 Author: Guennadi Liakhovetski <lg@denx.de>
14173 Date: Mon Apr 28 00:25:32 2008 +0200
14175 mx31ads: fix loadaddr environment variable define
14177 Arithmetic expressions do not get evaluated under stringification. Remove
14178 default network configuration, add DHCP command support. Thanks to Felix
14179 Radensky for reporting.
14181 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14183 commit 144eec777ac07bcb12bd38245a5a289f694a7f98
14184 Author: Wolfgang Denk <wd@denx.de>
14185 Date: Mon Apr 28 10:55:24 2008 +0200
14187 katmai: fix section overlap problem
14189 Since we didn't want to remove features from the configuration, we
14190 decided to increase the U-Boot image size (add one flash sector).
14192 Also changed the default environment definition to make it
14193 independent of such changes.
14195 Signed-off-by: Wolfgang Denk <wd@denx.de>
14196 Acked-by: Stefan Roese <sr@denx.de>
14198 commit 941d696d25624e3cc65ebf924199541acf52d74e
14199 Author: Wolfgang Denk <wd@denx.de>
14200 Date: Mon Apr 28 10:55:24 2008 +0200
14202 katmai: fix section overlap problem
14204 Since we didn't want to remove features from the configuration, we
14205 decided to increase the U-Boot image size (add one flash sector).
14207 Also changed the default environment definition to make it
14208 independent of such changes.
14210 Signed-off-by: Wolfgang Denk <wd@denx.de>
14211 Acked-by: Stefan Roese <sr@denx.de>
14213 commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466
14214 Author: Kumar Gala <galak@kernel.crashing.org>
14215 Date: Sat Apr 26 11:44:44 2008 -0500
14217 post: Fix building with O=
14219 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14221 commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c
14222 Author: Wolfgang Denk <wd@denx.de>
14223 Date: Sat Apr 26 01:55:00 2008 +0200
14227 Signed-off-by: Wolfgang Denk <wd@denx.de>
14229 commit 19cf2ec90d8ce52da60c1693693c4048cb810967
14230 Author: Wolfgang Denk <wd@denx.de>
14231 Date: Sat Apr 26 01:25:39 2008 +0200
14233 post/Makefile: make sure to use the correct flags
14235 ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a"
14236 messages to be printed.
14238 Signed-off-by: Wolfgang Denk <wd@denx.de>
14240 commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2
14241 Author: Wolfgang Denk <wd@denx.de>
14242 Date: Sat Apr 26 00:34:42 2008 +0200
14244 Coding Style cleanup, update CHANGELOG
14246 Signed-off-by: Wolfgang Denk <wd@denx.de>
14248 commit f9204e15173834ff8d123e36279ce49c3c6c74fc
14249 Author: Magnus Lilja <lilja.magnus@gmail.com>
14250 Date: Sun Apr 20 10:38:12 2008 +0200
14252 i.MX31: Enable SPI and MC13783/RTC support for the Litekit board
14254 This patch enables SPI and MC13783/RTC support for the Litekit board.
14256 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14258 commit f97abbfb47d9e407354e157cae3f6369e460cd37
14259 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
14260 Date: Fri Apr 25 01:08:32 2008 -0500
14262 MPC8544DS: decode pcie3 end-point configuration correctly.
14264 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
14265 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14267 commit 292188e15523c165c4269403fdcd33c26d89176e
14268 Author: Roy Zang <tie-fei.zang@freescale.com>
14269 Date: Fri Apr 25 00:55:09 2008 -0500
14271 MPC8544DS: Removes the unknown flash message information
14273 This patch removes the unknown flash message information:
14274 '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB'
14275 This unknown flash message is caused by PromJet.
14276 Some of the board user is unhappy with this information.
14278 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
14279 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14281 commit b2115757403beef0ac6bc2c6c3b24f31256a75d2
14282 Author: Kim Phillips <kim.phillips@freescale.com>
14283 Date: Thu Apr 24 14:07:38 2008 -0500
14285 mpc83xx: bump loadaddr over fdtaddr to 0x500000
14287 this seems as a good compromise between human memory, typing,
14288 and last but not least, to accommodate for current and future kernel bloat.
14290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14291 Acked-by: Dave Liu <daveliu@freescale.com>
14293 commit be5a7190265a34d968578ff266549c60f6f57654
14294 Author: Dave Liu <r63238@freescale.com>
14295 Date: Tue Apr 15 13:12:23 2008 +0800
14297 mpc83xx: clean up the readme for 83xx boards
14299 1. correct the typo
14300 2. correct the memory map for 837xerdb board
14302 Signed-off-by: Dave Liu <daveliu@freescale.com>
14304 commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff
14305 Author: Dave Liu <r63238@freescale.com>
14306 Date: Tue Apr 15 13:11:11 2008 +0800
14308 mpc83xx: remove the unused CPM's stuff
14310 The MPC83xx family never have CPM block, so remove it from 83xx.
14312 Signed-off-by: Dave Liu <daveliu@freescale.com>
14314 commit c63ad6325a8ac0097a54b418a3288926b0484b18
14315 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14316 Date: Fri Apr 18 16:29:40 2008 +0200
14318 cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST
14320 This patch adds a configurable flash auto protection list that can be used
14321 to make U-Boot protect flash regions in flash_init().
14323 The idea has been discussed on the u-boot mailing list starting
14326 Even this patch brings a new feature it is used as a bugfix for 4xx
14327 platforms where flash_init() does not completely protect the
14328 monitor's flash range in all situations.
14330 U-Boot protects the flash range from CFG_MONITOR_BASE to
14331 (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not
14332 include the reset vector at 0xfffffffc.
14335 #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
14337 This config option will auto protect the last 512k of flash that
14338 contains the bootloader on board like APC405 and PMC405.
14340 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14342 commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848
14343 Author: Stefan Roese <sr@denx.de>
14344 Date: Fri Apr 25 13:59:03 2008 +0200
14346 ppc4xx: Remove double defines in lwmon5.h
14348 introduced with latest lwmon5/POST merge
14350 Signed-off-by: Stefan Roese <sr@denx.de>
14352 commit 7590378fb9c686709492ceb142825cd058255956
14353 Author: Bartlomiej Sieka <tur@semihalf.com>
14354 Date: Fri Apr 25 13:54:02 2008 +0200
14356 Use watchdog-aware functions when calculating hashes of images - take two
14358 Some files didn't get updated properly with the "Use watchdog-aware
14359 functions when calculating hashes of images" commit, this commit
14362 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14363 Signed-off-by: Wolfgang Denk <wd@denx.de>
14365 commit 8e048c438e20ec89b49da5f085f8f756eba6e587
14366 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14367 Date: Fri Apr 25 12:01:39 2008 +0200
14369 ppc4xx: Add bootcount limit handling for APC405 boards
14371 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14373 commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe
14374 Author: Bartlomiej Sieka <tur@semihalf.com>
14375 Date: Fri Apr 25 12:10:09 2008 +0200
14377 Use watchdog-aware functions when calculating hashes of images
14379 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14381 commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3
14382 Author: Wolfgang Denk <wd@denx.de>
14383 Date: Fri Apr 25 12:44:08 2008 +0200
14385 USB: fix more GCC 4.2.x aliasing warnings
14387 Signed-off-by: Wolfgang Denk <wd@denx.de>
14388 Acked-by: Markus Klotzbuecher <mk@denx.de>
14390 commit aff4f86448f6586930f0a3be7fc4b0ddcf450980
14391 Author: Wolfgang Denk <wd@denx.de>
14392 Date: Fri Apr 25 12:41:53 2008 +0200
14394 lib_generic/crc32.c: add missing #include <watchdog.h>
14396 Signed-off-by: Wolfgang Denk <wd@denx.de>
14398 commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef
14399 Author: Wolfgang Denk <wd@denx.de>
14400 Date: Fri Apr 25 11:52:21 2008 +0200
14402 lib_generic/crc32.c: fix compile problem
14404 Signed-off-by: Wolfgang Denk <wd@denx.de>
14406 commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b
14407 Author: Stefan Roese <sr@denx.de>
14408 Date: Tue Apr 22 12:20:32 2008 +0200
14410 ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt
14412 The PCIe root-complex/endpoint setup as configured via the "pcie_mode"
14413 environment variable will now get passed to the Linux kernel by setting
14414 the device_type property of the PCIe device tree node. For normal root-
14415 complex configuration it will keep its defaults value of "pci" and for
14416 endpoint configuration it will get changed to "pci-endpoint".
14418 Signed-off-by: Stefan Roese <sr@denx.de>
14420 commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7
14421 Author: Yuri Tikhonov <yur@emcraft.com>
14422 Date: Thu Apr 24 10:30:53 2008 +0200
14424 lwmon5: watchdog POST fix
14426 Use the GPT0_MASKx registers as the temporary storage for watch-dog
14427 timer POST test instead of GPT0_COMPx. The latter
14428 (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header.
14430 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14431 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14433 commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9
14434 Author: Kim Phillips <kim.phillips@freescale.com>
14435 Date: Mon Apr 21 18:10:14 2008 -0500
14437 lib_ppc: Revert "Make MPC83xx one step closer to full relocation."
14439 This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has
14440 proven problematic getting right from the start at least on 83xx and
14443 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
14445 commit a99715b8ebfc500f3f40e01b36b64d473938443d
14446 Author: Detlev Zundel <dzu@denx.de>
14447 Date: Fri Apr 18 14:50:01 2008 +0200
14449 Realining some header definitions.
14451 Signed-off-by: Detlev Zundel <dzu@denx.de>
14453 commit 4acbc6c7f993cae409c424615415a3e76820f13d
14454 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14455 Date: Thu Apr 24 07:57:16 2008 +0200
14457 NE2000: coding style cleanup
14459 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14461 commit b4aff1ffaf7120032c653357c007faa14f74d29d
14462 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14463 Date: Wed Apr 23 00:11:47 2008 +0900
14465 qemu-mips.h: Add CFI support
14467 CONFIG_ENV_OVERWRITE is also added.
14469 This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD.
14471 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14472 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14474 commit 4a1f11b45a82908e5b0df602d703082413a6b7ed
14475 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14476 Date: Tue Apr 22 22:47:27 2008 +0900
14478 doc/README.mips: Add MIPS notes
14480 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14482 commit 215b01bba8bc662d35f72b084700b192d367dfb4
14483 Author: Bartlomiej Sieka <tur@semihalf.com>
14484 Date: Tue Apr 22 12:27:56 2008 +0200
14486 Add support for calculating hashes with watchdog triggering
14488 Implement watchodg-aware variants of hash calculation functions:
14492 The above functions calculate the hash of the input buffer in chunks,
14493 triggering the watchdog after processing each chunk. The chunk size
14494 is given as a function call parameter.
14496 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14498 commit 8875e3abab986df930167ce5c1ac4f95dcacc81c
14499 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
14500 Date: Wed Apr 23 11:02:12 2008 +0900
14502 qemu-mips: Cleanup whitespace, indentation, etc.
14504 No functional change.
14506 This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
14507 Then I re-created from scratch, and changed more lines than the original.
14509 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14510 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
14512 commit 386563197e3a50b0e97ad9aae87f57d9aab909ab
14513 Author: Vlad Lungu <vlad@comsys.ro>
14514 Date: Wed Oct 10 23:02:09 2007 +0300
14516 Fixed pcnet io_base
14518 Bus and phys address are not always the same
14520 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14522 commit 11ea26fd1cb63c91403fe04a6eea975cd418603f
14523 Author: Wolfgang Denk <wd@denx.de>
14524 Date: Thu Apr 24 23:44:26 2008 +0200
14526 drivers/net/pcnet.c: Coding Style cleanup.
14528 Signed-off-by: Wolfgang Denk <wd@denx.de>
14530 commit 899ef7b84578b7cafadfd78488c2fd2aac93f636
14531 Author: Vlad Lungu <vlad@comsys.ro>
14532 Date: Wed Oct 10 23:04:23 2007 +0300
14534 Added Am79C970A chip id to pcnet
14536 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
14538 commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5
14539 Author: Magnus Lilja <lilja.magnus@gmail.com>
14540 Date: Sun Apr 20 10:35:03 2008 +0200
14542 i.MX31: Fix architecture numbers for ADS and Litekit boards
14544 Correct the Linux architecture number for i.MX31 Litekit and ADS boards.
14546 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14548 commit e7ae84d6c7288790e88639f57cb60daf89c11369
14549 Author: Magnus Lilja <lilja.magnus@gmail.com>
14550 Date: Sun Apr 20 10:36:36 2008 +0200
14552 i.MX31: Use symbolic names for Litekit membases.
14554 Use symbolic names instead of hard coded addresses for Litekit membases.
14556 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
14558 commit 2ef1d9b6030d02f576b1bcd9fec948e602522012
14559 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14560 Date: Sat Apr 19 17:59:20 2008 +0200
14562 Fix show_boot_progress prototype
14564 in commit fad634071 "make show_boot_progress () weak."
14565 show_boot_progress is supposed to be declared as weak but declared as
14568 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14570 commit edbed247a14d70b94958010f736621212285de91
14571 Author: Bartlomiej Sieka <tur@semihalf.com>
14572 Date: Fri Apr 18 12:39:23 2008 +0200
14574 Memory footprint optimizations
14576 As suggested by Wolfgang Denk:
14577 - image printing functions:
14579 - remove indentation prefix from functions' signatures
14580 - merge getenv_verify and getenv_autostart into one parametrized function
14582 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
14584 commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8
14585 Author: Guennadi Liakhovetski <lg@denx.de>
14586 Date: Tue Apr 15 13:33:11 2008 +0200
14588 MX31ADS environment variable update, spi and rtc support
14590 Update MX31ADS default environment to better match the flash layout and
14591 the memory map, support SPI and RTC.
14593 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14595 commit 022f12163595b9a55380c6d77c3119b93d6a9a4b
14596 Author: Kumar Gala <galak@kernel.crashing.org>
14597 Date: Mon Apr 21 09:28:36 2008 -0500
14599 85xx: Round up frequency calculations to get reasonable output
14601 eg. because of rounding error we can get 799Mhz instead of 800Mhz.
14603 Introduced DIV_ROUND_UP and roundup taken from linux kernel.
14605 Signed-off-by: Dejan Minic <minic@freescale.com>
14606 Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
14607 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14608 Acked-by: Andy Fleming <afleming@freescale.com>
14610 commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6
14611 Author: Kumar Gala <galak@kernel.crashing.org>
14612 Date: Wed Apr 23 16:58:04 2008 -0500
14614 fsl_pci: Only modify registers if we have them
14616 pme_msg_det exists only on PCIe controllers only set it if we are a "bridge".
14618 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14620 commit 83fe32334337def160b302aa9d152d808bfcc68e
14621 Author: Markus Klotzbücher <mk@denx.de>
14622 Date: Wed Apr 23 10:57:33 2008 +0200
14624 USB: remove a cpu bug workaround for an unsupported architecture.
14626 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14628 commit f957576cb53e6cfab412709cfc8db1afd39d21c3
14629 Author: Markus Klotzbücher <mk@denx.de>
14630 Date: Wed Apr 23 10:53:23 2008 +0200
14632 USB: fix those pesky aliasing warnings issued by gcc-4.2
14634 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
14635 Signed-off-by: Detlev Zundel <dzu@denx.de>
14637 commit 89cdab788f3716b335fefb60b836ebcf975aceab
14638 Author: Mike Frysinger <vapier@gentoo.org>
14639 Date: Mon Mar 31 11:02:01 2008 -0400
14641 crc32: use uint32_t rather than unsigned long
14643 The envcrc.c does sizeof(unsigned long) when calculating the crc, but
14644 this is done with the build toolchain instead of the target tool
14645 chain, so if the build is a 64bit system but the target is 32bits,
14646 the size will obviously be wrong. This converts all unsigned long
14647 stuff related to crc32 to uint32_t types. Compile tested only: output
14648 of ./tools/envcrc when run on a 32bit build system matches that of a
14649 64bit build system.
14651 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14652 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
14654 commit 80c40b765b3642ddb9f3392b7898715aab44a29c
14655 Author: Dirk Behme <dirk.behme@googlemail.com>
14656 Date: Wed Mar 26 09:53:29 2008 +0100
14658 ARM: Davinci: Fix DM644x timer overflow handling and cleanup
14660 Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.
14664 - Remove *_masked() functions as noted by Wolfgang
14666 - Adapt register naming to recent TI spec (sprue26, March 2007)
14668 - Fix reset_timer() handling
14670 - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.
14672 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
14674 - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).
14676 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com> and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for the hints & testing!
14678 Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.
14680 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
14681 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
14683 commit a6e6fc610e39dec41b79680413d4ed38145bd3c8
14684 Author: Sergei Poselenov <sposelenov@emcraft.com>
14685 Date: Wed Apr 9 16:09:41 2008 +0200
14687 Added watchdog triggering calls in the "mtest" test function.
14689 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
14691 commit d32a874b9b4c1e949ee38be7790f6bf6d6143451
14692 Author: Yuri Tikhonov <yur@emcraft.com>
14693 Date: Sun Apr 6 19:19:14 2008 +0200
14695 lwmon5 watchdog: limit trigger rate
14697 Limit the rate of h/w watch-dog triggering on the LWMON5 board by
14698 the CONFIG_WD_MAX_RATE value.
14700 Note that an earlier version of this patch which used microseconds
14701 instead of ticks dis not work. The problem was that we used
14702 usec2ticks() to convert microseconds into ticks. usec2ticks() uses
14703 get_tbclk(), which in turn calls get_sys_info(). It turns out that
14704 this function does a lot of prolonged operations (like divisions)
14705 which take too much time so we do not trigger the watchdog in time,
14706 and it resets the system.
14708 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14710 commit 2d2b994a30bb100774dc747ae9865b7f95285a88
14711 Author: Yuri Tikhonov <yur@emcraft.com>
14712 Date: Mon Mar 31 10:51:37 2008 +0200
14714 POST: move CONFIG_POST to Makefiles
14716 Introduce the new logical option CONFIG_HAS_POST which is set when the
14717 platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles
14718 to determine should the POST libs be compiled for the selected target
14721 To avoid breaking u-boot linking process, the empty post/libpost.a file is
14722 created for platforms which do not have POSTs.
14724 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14725 Signed-off-by: Wolfgang Denk <wd@denx.de>
14727 commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1
14728 Author: Yuri Tikhonov <yur@emcraft.com>
14729 Date: Mon Mar 31 10:49:34 2008 +0200
14731 POST: preparations for moving CONFIG_POST to Makefiles
14733 Remove CONFIG_POST ifdefs from the post/ source files.
14735 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
14736 Signed-off-by: Wolfgang Denk <wd@denx.de>
14738 commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e
14739 Author: Stefan Roese <sr@denx.de>
14740 Date: Tue Apr 22 14:14:20 2008 +0200
14742 ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage
14744 This patch fixes the Canyonlands and Glacier default environment to better
14745 fit to the arch/powerpc device-tree kernels. The variables dealing with
14746 arch/ppc booting are removed, since these boards are supported only in
14747 arch/powerpc. Glacier uses the same config file as Canyonlands.
14749 Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU.
14751 Signed-off-by: Stefan Roese <sr@denx.de>
14753 commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b
14754 Author: Stefan Roese <sr@denx.de>
14755 Date: Tue Apr 22 14:06:42 2008 +0200
14757 ppc4xx: Small coding style cleanup for the latest esd patches
14759 Signed-off-by: Stefan Roese <sr@denx.de>
14761 commit 79941d63bc03aed8c48d7602f18217cc200ee931
14762 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14763 Date: Mon Apr 21 18:01:07 2008 +0200
14765 ppc4xx: Update CPU strapping for PMC440 boards
14767 This patch removes the temporary 'test' strapping option
14768 of the sbe command. The '667' strapping option now uses
14769 a PLB/PCI divider of 3.
14771 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14773 commit f00cf3193a6635355b121e90debb2f54e777e7da
14774 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14775 Date: Mon Apr 21 14:42:21 2008 +0200
14777 ppc4xx: Remove unused APC405 strataflash driver
14779 The APC405 board support has been migrated to use the common
14782 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14784 commit 1c686676a86473bbd92151f0544e109413f6ed06
14785 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14786 Date: Mon Apr 21 14:42:17 2008 +0200
14788 ppc4xx: Update APC405 configuration
14790 - enable esd's auto_update mechanism
14791 - support alternative flash layout on rev. 1.8 boards
14792 - update default environment
14793 - use common CFI flash driver
14794 - coding style cleanup
14796 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14798 commit 0b9872515a521bf7866dc24b85ddce708e60d702
14799 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14800 Date: Mon Apr 21 14:42:11 2008 +0200
14802 ppc4xx: Update APC405 board support
14804 - enable esd's auto_update mechanism
14805 - fix LCD support on latest hardware revision (uses other LCD controller)
14806 - support alternative flash layout on rev. 1.8 boards
14807 - coding style cleanup
14809 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14811 commit 83975d02e225e231960784972e7820a8b303756b
14812 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14813 Date: Mon Apr 21 14:42:06 2008 +0200
14815 ppc4xx: update esd's common auto_update code for 405 boards
14817 - Coding style cleanup (long lines)
14818 - improve handling of protected flash regions
14821 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14823 commit b9233fe5d59cb25d975071616bd1035d6f4c2285
14824 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14825 Date: Mon Apr 21 14:41:59 2008 +0200
14827 ppc4xx: Update esd's common LCD code for 405 boards
14829 - Coding style cleanup (long lines)
14830 - Add s1d13505 support
14831 - Make some functions return a result code instead of void
14833 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14835 commit dea68189424c3f1242427a8146a3861bf093173c
14836 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14837 Date: Mon Apr 21 11:36:55 2008 +0200
14839 ppc4xx: Update FPGA image for APC405 boards
14841 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14843 commit 2a05b152924acfcec3b037693329e517e6d3578f
14844 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14845 Date: Mon Apr 21 11:36:08 2008 +0200
14847 ppc4xx: Update bootlogo for APC405 boards
14849 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14851 commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c
14852 Author: Stefan Roese <sr@denx.de>
14853 Date: Fri Apr 18 16:41:31 2008 +0200
14855 ppc4xx: Add dcache_enable() for 440
14857 dcache_enable() was missing for 440 and the patch
14858 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf
14859 "] behavior uses this function.
14861 Note: Currently the cache handling functions like
14862 d/icache_disable/enable() are NOP's on 440. This may be changed in the
14865 Signed-off-by: Stefan Roese <sr@denx.de>
14867 commit a49e0d177a0749614b316ec847fb623f09c82c07
14868 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14869 Date: Mon Apr 21 11:19:04 2008 +0200
14871 video: Add missing free for logo memory
14873 This patch adds two missing free()s.
14875 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14877 commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42
14878 Author: Troy Kisky <troy.kisky@boundarydevices.com>
14879 Date: Mon Sep 24 16:41:43 2007 -0700
14881 PATCH - Fix oob data copied into supplied buffer
14883 This patch correctly sets the oobavail variable
14884 and fixes a bug where the oob data was not valid when
14885 there where multiple groups in oobfree.
14887 First segment fixes a typo
14888 Second segment fixes a bug where oob data may be copied incorrectly.
14889 Third segment adds an error message when exiting due to write protect.
14890 Forth segment fixes a bug where oobavail may be set incorrectly.
14892 Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
14894 commit e1d09680f64b452adde89ed9fe28a77c56bedc9a
14895 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14896 Date: Fri Apr 18 17:24:32 2008 +0200
14898 ppc4xx: Fix sys_get_info() for 405GP(r)
14900 This patch assigns the correct EBC clock for 405GP(r) CPUs
14901 to PPC4xx_SYS_INFO structure. Without this patch U-Boot
14902 uses an uninitialized EBC clock in its startup message.
14904 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
14906 commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7
14907 Author: Wolfgang Denk <wd@denx.de>
14908 Date: Sun Apr 20 15:39:38 2008 -0700
14910 Makefile: remove nand_spl/System.map when cleaning up.
14912 commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b
14913 Author: Wolfgang Denk <wd@denx.de>
14914 Date: Sun Apr 20 15:35:52 2008 -0700
14916 MAKEALL: sort entries / lists.
14918 Signed-off-by: Wolfgang Denk <wd@denx.de>
14920 commit 0878af169b181868a105b5c33f3a6423e2c9fd60
14921 Author: Kumar Gala <galak@kernel.crashing.org>
14922 Date: Fri Apr 18 11:29:01 2008 -0500
14924 85xx: Fix size of cpu-release-addr property
14926 The cpu-release-addr is defined as always being a 64-bit quanity regardless
14927 if we are running on a 32-bit or 64-bit machine.
14929 commit 88353a985109562a639b2f8a0c90d77011bfe374
14930 Author: Timur Tabi <timur@freescale.com>
14931 Date: Fri Apr 4 11:15:58 2008 -0500
14933 Fix calculation of I2C clock for some 85xx chips
14935 Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and
14936 some use CCB/3. There is no pattern that can be used to determine which
14937 chips use which frequency, so the only way to determine is to look up the
14938 actual SOC designation and use the right value for that SOC.
14940 Update immap_85xx.h to include the GUTS PORDEVSR2 register.
14942 Signed-off-by: Timur Tabi <timur@freescale.com>
14944 commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e
14945 Author: Wolfgang Denk <wd@denx.de>
14946 Date: Fri Apr 18 11:44:27 2008 -0700
14948 Fix build breakage casued by commit c0559be371b2
14950 Change env_get_char from a global function ptr to a function.
14952 Signed-off-by: Wolfgang Denk <wd@denx.de>
14954 commit 268a804d7e2fa07b64211fd2f9a9615db4539f23
14955 Author: Wolfgang Denk <wd@denx.de>
14956 Date: Fri Apr 18 10:53:41 2008 -0700
14958 Coding Style cleanup, update CHANGELOG.
14960 Signed-off-by: Wolfgang Denk <wd@denx.de>
14962 commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7
14963 Author: Mike Frysinger <vapier@gentoo.org>
14964 Date: Tue Apr 8 14:00:57 2008 -0400
14966 Add support for u-boot in svn and localversion-* files
14968 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
14970 commit d23ff6827decf121461fbc5622612fd7effe207e
14971 Author: Guennadi Liakhovetski <lg@denx.de>
14972 Date: Thu Apr 3 17:04:22 2008 +0200
14974 MX31ADS network and flash updates
14976 This patch allows U-Boot to use buffered writes to the Spansion NOR
14977 flash installed on this board, and eliminates long delays in network
14978 transfers after the board startup.
14980 Also modify flash layout to embed main and redundant environment
14981 blocks in the U-Boot image.
14983 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14985 commit b5dc9b304d289831f291843ff88a45cbdf1a6290
14986 Author: Guennadi Liakhovetski <lg@denx.de>
14987 Date: Mon Apr 14 10:53:12 2008 +0200
14989 Support for the MX31ADS evaluation board from Freescale
14991 This patch adds support for the MX31ADS evaluation board from Freescale,
14992 initialization code is copied from RedBoot sources, also provided by
14995 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
14997 commit 499e7831e1baaac6bfb959213f1950c216fbc5ba
14998 Author: Stefan Roese <sr@denx.de>
14999 Date: Tue Apr 8 10:33:29 2008 +0200
15001 ppc4xx: Change Canyonlands to support booting from 2k page NAND devices
15003 Signed-off-by: Stefan Roese <sr@denx.de>
15005 commit 5e182dce04d68cc94407a1b1fa09307f2bb96719
15006 Author: Stefan Roese <sr@denx.de>
15007 Date: Tue Apr 8 10:33:28 2008 +0200
15009 ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM
15011 Signed-off-by: Stefan Roese <sr@denx.de>
15013 commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825
15014 Author: Stefan Roese <sr@denx.de>
15015 Date: Tue Apr 8 10:33:27 2008 +0200
15017 ppc4xx: Add Glacier NAND booting target
15019 Signed-off-by: Stefan Roese <sr@denx.de>
15021 commit 46f373838e384a4c23d13581b1dfa5acb66b5810
15022 Author: Stefan Roese <sr@denx.de>
15023 Date: Tue Apr 8 10:31:00 2008 +0200
15025 nand_spl: Update nand_spl to support 2k page size NAND devices
15027 This patch adds support for booting from 2k page sized NAND device
15028 (e.g. Micron 29F2G08AAC).
15030 Tested on AMCC Canyonlands.
15032 Signed-off-by: Stefan Roese <sr@denx.de>
15034 commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04
15035 Author: Anatolij Gustschin <agust@denx.de>
15036 Date: Thu Apr 17 18:18:00 2008 +0200
15038 Fix crash on sequoia in ppc_4xx_eth_init
15040 Currently U-Boot crashes in ppc_4xx_eth_init on sequoia
15041 with cache enabled (TLB Parity exeption). This patch
15044 Signed-off-by: Anatolij Gustschin <agust@denx.de>
15046 commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b
15047 Author: Anatolij Gustschin <agust@denx.de>
15048 Date: Thu Apr 17 18:15:27 2008 +0200
15050 ppc4xx: Fix crash on sequoia with cache enabled
15052 Currently U-Boot crashes on sequoia board in CPU POST if
15053 cache is enabled (CONFIG_4xx_DCACHE defined). The cache
15054 won't be disabled by change_tlb before CPU POST because
15055 there is an insufficient adress range check since
15056 CFG_MEM_TOP_HIDE was introduced. This patch tries to fix
15059 Signed-off-by: Anatolij Gustschin <agust@denx.de>
15061 commit 43c509254fab375c49936498da944658117ed07c
15062 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15063 Date: Thu Apr 17 23:35:13 2008 +0900
15065 Use jr as register jump instruction
15067 Current assembler codes are inconsistent in the way of register jump
15068 instruction usage; some use jr, some use j. Of course GNU as allows both
15069 usages, but as can be expected from `Jump Register' the mnemonic `jr' is
15070 more intuitive than `j'. For example, Linux doesn't have `j <reg>' usage
15073 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
15075 commit 7ce63709828d37b08866e537339a169bd0db2bd3
15076 Author: Guennadi Liakhovetski <lg@denx.de>
15077 Date: Tue Apr 15 14:15:30 2008 +0200
15079 RTC driver for MC13783
15081 MC13783 is a multifunction IS with an SPI interface to the host. This
15082 driver handles the RTC controller in this chip.
15084 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15086 commit 38254f45b0b412332726c90d3184ad47479fcffb
15087 Author: Guennadi Liakhovetski <lg@denx.de>
15088 Date: Tue Apr 15 14:14:25 2008 +0200
15090 New i.MX31 SPI driver
15092 This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far
15093 only implemented and tested on i.MX31, can with a modified register layout
15094 and definitions be used for i.MX27, I think, MXC CPUs have similar SPI
15097 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15099 commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38
15100 Author: Magnus Lilja <lilja.magnus@gmail.com>
15101 Date: Tue Apr 15 19:09:10 2008 +0200
15103 Fix name of i.MX31 boards in config file header
15105 Correct the name of the i.MX31 Litekit and phyCORE boards in config files.
15107 Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
15109 commit a49864593e083a5d0779fb9ca98e5a0f2053183d
15110 Author: Mike Frysinger <vapier@gentoo.org>
15111 Date: Sun Apr 13 19:42:19 2008 -0400
15113 allow ports to override go behavior
15115 Split the arch-specific logic out of the common go code and into a dedicated
15116 weak function called do_go_exec() that lives in cpu directories. This will
15117 need review from i386/nios people to make sure I didn't break them.
15119 commit 017e9b7925f74878d0e9475388cca9bda5ef9482
15120 Author: Mike Frysinger <vapier@gentoo.org>
15121 Date: Sun Apr 13 19:42:18 2008 -0400
15123 allow ports to override bootelf behavior
15125 Change the bootelf setup function into a dedicated weak function called
15126 do_bootelf_exec. This way ports can control the behavior however they
15127 like before/after calling the ELF entry point.
15129 commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7
15130 Author: Ulf Samuelsson <ulf@atmel.com>
15131 Date: Sat Apr 12 20:56:03 2008 +0200
15133 Reorder ARM boards in Makefile
15135 Rearrange ARM boards in Makefile so that ARM926EJ-S boards
15136 are no longer under ARM92xT header.
15138 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
15139 Ack-By Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15141 commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688
15142 Author: Ulf Samuelsson <ulf@atmel.com>
15143 Date: Sat Apr 12 20:29:44 2008 +0200
15145 Clean up dataflash partitioning
15147 This patch removes the board dependent parts from
15148 "drivers/mtd/dataflash.c".
15149 Each board relying on this, will have the appropriate
15150 code in a new file, "partition.c" in the board directory.
15151 board Makefiles updated to use the file.
15153 The dataflash partitions are aligned on sector/page boundaries.
15155 The CONFIG_NEW_DF_PARTITION was used to create named partitions
15156 This is now the default operation, and the CONFIG variable is removed.
15158 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
15160 commit 51ecde946fec511a16346e498204ca10ad71080d
15161 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15162 Date: Sat Apr 12 14:08:45 2008 +0200
15164 gitignore: udpate stgit generated and .patch file
15166 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15168 commit 66e39818e95f51ee1c1dd2094407a8929543fa6d
15169 Author: Wolfgang Denk <wd@denx.de>
15170 Date: Fri Apr 18 00:15:36 2008 -0700
15172 Get rid of redundant copy of renamed header file.
15174 Signed-off-by: Wolfgang Denk <wd@denx.de>
15176 commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc
15177 Author: Vlad Lungu <vlad@comsys.ro>
15178 Date: Fri Apr 11 21:20:14 2008 +0300
15180 Fix dependency generation for older gcc versions
15182 With gcc 3.3.3 at least, compilation fails with
15184 Generating include/autoconf.mk
15185 gcc: compilation of header file requested
15186 make: *** [include/autoconf.mk] Error 1
15188 since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba.
15190 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
15192 commit cb1c4896905ab22fcd982e6a8a539f0031942e71
15193 Author: Marian Balakowicz <m8@semihalf.com>
15194 Date: Fri Apr 11 11:07:49 2008 +0200
15196 Restore the ability to continue booting after legacy image overwrite
15198 Before new uImage code was merged, bootm code allowed for the kernel image to
15199 get overwritten during decompresion. new uImage introduced a check for image
15200 overwrites and refused to boot the image that got overwritten. This patch
15201 restores the old behavior. It also adds a warning when the image overwriten is
15202 a multi-image file, because in such case accessing componentes other than the
15203 first one will fail.
15205 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15207 commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036
15208 Author: Marian Balakowicz <m8@semihalf.com>
15209 Date: Fri Apr 11 11:07:43 2008 +0200
15211 ppc: Fix ftd_blob variable init when processing raw blob
15213 Set fdt_blob variable before its value is printed out.
15215 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
15217 commit 3d36be030043cd841a2551d00a395135e363a64b
15218 Author: Jason Wessel <jason.wessel@windriver.com>
15219 Date: Thu Apr 10 14:30:16 2008 -0500
15221 Remove all the search paths from the .lds files.
15223 The cross compiler is responsible for providing the correct libraries
15224 and the logic to find the linking libraries.
15226 Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
15228 commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58
15229 Author: Bartlomiej Sieka <tur@semihalf.com>
15230 Date: Mon Apr 14 15:44:16 2008 +0200
15232 Boot-related documentation update
15234 - document 'bootm_low' and 'bootm_size' environment variables
15235 - update inaccurate CFG_BOOTMAPSZ entry
15237 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
15239 commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a
15240 Author: Guennadi Liakhovetski <lg@denx.de>
15241 Date: Wed Apr 9 17:34:08 2008 +0200
15243 Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code"
15245 Restore logic reverted by commit
15247 commit 80767a6cead9990d9e77e62be947843c2c72f469
15248 Author: Peter Pearse <peter.pearse@arm.com>
15249 Date: Wed Sep 5 16:04:41 2007 +0100
15251 Changed API name to coloured_led.h
15252 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
15253 Tidied other cpu/arm920t/start.S code
15255 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15257 commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf
15258 Author: Mike Frysinger <vapier@gentoo.org>
15259 Date: Tue Apr 8 10:24:24 2008 -0400
15261 Remove conflicting NAND ID
15263 There are two NAND entries with ID 0xDC and this obviously causes problems.
15264 In the kernel, they punted the first entry, so we should do the same.
15266 See this upstream e-mail for more info:
15267 http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html
15269 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
15270 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15272 commit 188e94c370621708d13547d58dbc6ed3c5602aa8
15273 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15274 Date: Tue Apr 8 16:20:35 2008 +0900
15276 cpu/mips/cpu.c: Fix flush_cache bug
15278 Cache operations have to take line address (addr), not start_addr.
15279 I noticed this bug when debugging ping failure.
15281 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
15283 commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4
15284 Author: Martin Krause <martin.krause@tqs.de>
15285 Date: Thu Apr 3 14:29:01 2008 +0200
15287 TQM5200: fix default IDE reset level
15289 Before the first call of ide_reset(), the level of the IDE reset
15290 signal on the TQM5200 is low (reset asserted). This patch sets the
15291 default value to high (reset not asserted).
15293 Currently this patch fixes no real problem, but it is cleaner to
15294 assert the reset signal only on demand, and not permanently.
15296 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15298 commit c61e033d6e8abb7b4060ee36060961e1399f6079
15299 Author: Detlev Zundel <dzu@denx.de>
15300 Date: Thu Apr 3 14:18:48 2008 +0200
15302 mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING
15304 Signed-off-by: Detlev Zundel <dzu@denx.de>
15306 commit f308572e19eb7fe63aa3d41f214cde4c23c9800f
15307 Author: Detlev Zundel <dzu@denx.de>
15308 Date: Thu Apr 3 14:18:47 2008 +0200
15310 mgcoge, mgsuv: rename 'addcon' to 'addcons'
15312 The latter name with 13 users is already established, so we will use
15315 Signed-off-by: Detlev Zundel <dzu@denx.de>
15317 commit e175eacc87c3a9e4dad0799fee0e95732520afc7
15318 Author: Martin Krause <martin.krause@tqs.de>
15319 Date: Thu Apr 3 13:37:56 2008 +0200
15321 IDE: fix bug in reset sequence
15323 According to the ata (ata5) specification the RESET- signal
15324 shall be asserted for at least 25 us. Without this patch,
15325 the RESET- signal is asserted on some boards for only < 1 us
15326 (e. g. on the TQM5200). This patch adds a general delay of
15327 25 us to the RESET- signal.
15329 Without this patch a Platinum 4 GiB CF card is not recognised
15330 properly on boards with a TQM5200 (STK52xx, TB5200).
15332 Signed-off-by: Martin Krause <martin.krause@tqs.de>
15334 commit 813bea96a960916c72b4a3a7df840151529c26ce
15335 Author: Sascha Laue <Sascha.Laue@gmx.biz>
15336 Date: Thu Apr 3 14:43:11 2008 +0200
15338 lwmon5: disable CONFIG_ZERO_BOOTDELAY
15340 Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
15342 commit 53eec6f1d25932e76d63ccb14082792b0b96bf41
15343 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15344 Date: Wed Apr 2 08:03:58 2008 +0200
15346 ds174x: Fix warning on return in rtc_get and rtc_set functions
15348 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15350 commit a253b38bf50c85227c33ca0febc870ee49d1588e
15351 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15352 Date: Wed Apr 2 08:03:57 2008 +0200
15354 cmd_log.c: Fix assignment differ in signedness
15356 In function 'logbuff_init_ptrs':
15357 cmd_log.c:79: warning: pointer targets in assignment differ in signedness
15359 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15361 commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df
15362 Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in>
15363 Date: Wed Apr 2 11:04:43 2008 +0530
15365 Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c
15367 Signed-off-by: gururaja hebbar <gururajakr@sanyo.co.in>
15369 commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d
15370 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15371 Date: Tue Apr 1 14:07:10 2008 +0200
15373 s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame
15375 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15377 commit c08fb3ea36d19b1640b7906264581e9105534399
15378 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15379 Date: Tue Apr 15 10:24:14 2008 +0200
15381 Additional PCI IDs for IDE and network controllers
15383 These PCI IDs are required by the Linkstation platforms.
15385 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15387 commit c0559be371b2a64b1a817088c3308688e2182f93
15388 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
15389 Date: Mon Apr 14 23:01:50 2008 +0200
15391 Change env_get_char from a global function ptr to a function.
15393 This avoids an early global data reference.
15395 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
15397 commit 3e0f331c05d72f140715c1e9fca991927e44d422
15398 Author: Guennadi Liakhovetski <lg@denx.de>
15399 Date: Tue Apr 29 12:35:08 2008 +0000
15401 Clean up smsc911x driver
15403 Replace direct register address derefencing with accessor functions.
15404 Restrict explicitly 32-bit bus-width, extend affected configurations
15407 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15408 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15410 commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd
15411 Author: Sascha Hauer <s.hauer@pengutronix.de>
15412 Date: Tue Apr 15 00:08:20 2008 -0400
15414 This patch adds a driver for the following smsc network controllers:
15422 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15423 Signed-off-by: Guennadi Liakhovetski<lg@denx.de>
15424 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
15426 commit 3dfd4aab929cccddb63d9ea509967861e1333b52
15427 Author: Sascha Laue <Sascha.Laue@gmx.biz>
15428 Date: Tue Apr 1 15:13:03 2008 +0200
15430 Fix watchdog POST for lwmon5
15432 If the hardware watchdog detects a voltage error, the watchdog sets
15433 GPIO62 to low. The watchdog POST has to detect this low level.
15435 Signed-off-by: Sascha Laue <leglas0@legpc180.leg.liebherr.i>
15437 commit 24b448448a917e52806f82660a5c9d47608894fb
15438 Author: Dave Liu <r63238@freescale.com>
15439 Date: Tue Apr 1 15:22:11 2008 +0800
15441 ata: update the libata.h from ata.h of linux kernel
15443 Current libata.h of u-boot is out of sync from linux kernel,
15444 this patch make it be consistent with linux kernel.
15446 Signed-off-by: Dave Liu <daveliu@freescale.com>
15447 Signed-off-by: Tor Krill <tor@excito.com>
15449 commit f8f9dc98883f66f59eb0601da65808e6b139c87c
15450 Author: Kumar Gala <galak@kernel.crashing.org>
15451 Date: Mon Mar 31 11:59:27 2008 -0500
15453 Allow use of ARCH=powerpc when building
15455 The linux kernel is now mostly ARCH=powerpc, so to make life easier
15456 allow use to use ARCH=powerpc and convert it to ARCH=ppc.
15458 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15460 commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0
15461 Author: Kyungmin Park <kmpark@infradead.org>
15462 Date: Mon Mar 31 10:40:54 2008 +0900
15464 Add apollon board MAINTAINERS entry
15466 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15468 commit 77e475cc0ed1832160017d364be32a0be9ff02a9
15469 Author: Kyungmin Park <kmpark@infradead.org>
15470 Date: Mon Mar 31 10:40:36 2008 +0900
15474 It should access with 16-bit instead of 8-bit
15476 Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND.
15478 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15480 commit a9da2b41079d230db3a5641625311983f85ce1fb
15481 Author: Kyungmin Park <kmpark@infradead.org>
15482 Date: Mon Mar 31 10:40:19 2008 +0900
15484 Fix OneNAND erase command
15486 It mis-calculates the block address.
15487 Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand.
15489 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
15491 commit 61525f2ffa156665a66908fda47dbf29d65ea579
15492 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
15493 Date: Mon Mar 31 01:32:15 2008 +0200
15495 Support for LinkStation / KuroBox HD and HG PPC models
15497 This patch is based on the port by Mihai Georgian (see linkstation.c for
15498 Copyright information) and implements support for LinkStation / KuroBox HD
15499 and HG PPC models from Buffalo Technology, whereby HD is deactivated at
15500 the moment, pending network driver fixing.
15502 Notice to users: this is pretty much a barebone port. Support for network
15503 on HG models is already in the U-Boot mainline, but you might also want
15504 patches to switch fan / phy modes depending on the negotiated ethernet
15505 parameters. This patch also doesn't support console switching, booting EM
15506 mode, Buffalo specific ext2 magic number. So, if you want to use any of
15507 those, you need additional patches. Otherwise this patche provides a fully
15508 functional u-boot with a network console on your system.
15510 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15512 commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea
15513 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15514 Date: Sun Mar 30 01:22:13 2008 -0500
15516 Add CONFIG_MII_INIT support to related boards
15518 Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in
15519 cmd_init.c. Add CONFIG_MII_INIT to board configuration files
15520 that use mii_init() in cmd_init.c.
15522 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15523 Acked-by: Ben Warren <biggerbadderben@gmail.com>
15525 commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4
15526 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15527 Date: Sun Mar 30 01:19:06 2008 -0500
15529 Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards
15531 Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define
15532 CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files.
15534 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
15536 commit e99ccb488181d012248c6be30b2093e950319fc5
15537 Author: Kumar Gala <galak@kernel.crashing.org>
15538 Date: Thu Mar 27 11:46:38 2008 -0500
15540 Introduce phys_size_t and move phys_addr_t into asm/types.h
15542 Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's
15543 that have larger physical addresses like 44x, 85xx, and 86xx.
15545 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15547 commit 20a14a42a25f72e379f38460b8a8484667536795
15548 Author: Andy Fleming <afleming@freescale.com>
15549 Date: Wed Apr 2 16:19:07 2008 -0500
15551 Rename include/md5.h to include/u-boot/md5.h
15553 Some systems have md5.h installed in /usr/include/. This isn't the
15554 desired file (we want the one in include/md5.h). This will avoid the
15555 conflict. This fixes the host tools building problem by creating a new
15556 directory for U-Boot specific header files.
15558 [Patch by Andy Fleming, modified to use separate directory by Wolfgang
15561 Signed-off-by: Wolfgang Denk <wd@denx.de>
15562 Signed-off-by: Andy Fleming <afleming@freescale.com>
15563 Acked-by: Timur Tabi <timur@freescale.com>
15565 commit f297b7a1ec87433f66320d89d993e1bc738c66b8
15566 Author: Dave Liu <r63238@freescale.com>
15567 Date: Thu Mar 27 18:51:17 2008 +0800
15569 drivers: code clean up
15571 Signed-off-by: Dave Liu <daveliu@freescale.com>
15573 commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597
15574 Author: Dave Liu <r63238@freescale.com>
15575 Date: Thu Mar 27 18:50:41 2008 +0800
15577 drivers: clean up the ata_piix.h
15579 Signed-off-by: Dave Liu <daveliu@freescale.com>
15581 commit e8f7ba404f1409606962815ecc955a06984b08b3
15582 Author: Dave Liu <r63238@freescale.com>
15583 Date: Thu Mar 27 18:49:56 2008 +0800
15585 doc: english polishing for README.sata
15587 according to gvb's suggestion, polishing for the doc.
15589 Signed-off-by: Jerry Van Baren <gerald.vanbaren@ge.com>
15590 Signed-off-by: Dave Liu <daveliu@freescale.com>
15592 commit 3e3f766a5274d204780460e1879723b565296d34
15593 Author: Kumar Gala <galak@kernel.crashing.org>
15594 Date: Wed Mar 26 18:53:28 2008 -0500
15596 Fix warnings introduced by I2C bus speed setting patch
15598 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15600 commit 3c735e7437150e8615f26930c7819db85634276d
15601 Author: eran liberty <eran.liberty@gmail.com>
15602 Date: Thu Mar 27 00:50:49 2008 +0100
15604 Altera Stratix II support
15606 Adds Support for Altera's Stratix II.
15608 Within your board specific init file you will have to call
15610 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off);
15611 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc);
15613 Altera_desc* contines (for example):
15615 Altera_StratixII, /* part type */
15616 passive_serial, /* interface type */
15617 1, /* bytes of data part can accept */
15618 (void *)(&funcs), /* interface function table */
15619 0L, /* base interface address */
15620 0 /* implementation specific cookie */
15623 funcs is the interface. It is of type altera_board_specific_func.
15624 It looks like this:
15625 altera_board_specific_func func = {
15636 you will have to implement these functions, which is usually bit
15639 Signed-off-by: Eran Liberty <liberty@extricom.com>
15641 commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335
15642 Author: Wolfgang Denk <wd@denx.de>
15643 Date: Sun Apr 13 14:32:54 2008 -0700
15647 Signed-off-by: Wolfgang Denk <wd@denx.de>
15649 commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7
15650 Author: Sascha Hauer <s.hauer@pengutronix.de>
15651 Date: Wed Mar 26 20:41:17 2008 +0100
15653 Phytec Phycore-i.MX31 support
15655 This patch adds support for the Phytec Phycore-i.MX31 board
15657 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15658 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15660 commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1
15661 Author: Sascha Hauer <s.hauer@pengutronix.de>
15662 Date: Wed Mar 26 20:41:09 2008 +0100
15664 mx31 litekit support
15666 This patch adds support for the mx31 litekit board
15668 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15669 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15671 commit cdace0661208754a53019ea0dc7b803a040e0939
15672 Author: Sascha Hauer <s.hauer@pengutronix.de>
15673 Date: Wed Mar 26 20:40:49 2008 +0100
15675 add an i2c driver for mx31
15677 This patch adds an i2c driver for Freescale i.MX processors
15679 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15680 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15682 commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6
15683 Author: Sascha Hauer <s.hauer@pengutronix.de>
15684 Date: Wed Mar 26 20:40:42 2008 +0100
15686 core support for Freescale mx31
15688 This patch adds the core support for Freescale mx31
15690 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15691 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15693 commit 7ec68862a27c8f6f6d566228de8f6724d964a939
15694 Author: Wolfgang Denk <wd@denx.de>
15695 Date: Sun Apr 13 14:19:23 2008 -0700
15699 ...as suggested by Peter Pearse
15701 Signed-off-by: Wolfgang Denk <wd@denx.de>
15703 commit 5252ed95204bdf55bec5a90ea69860bf2f78c643
15704 Author: Sascha Hauer <s.hauer@pengutronix.de>
15705 Date: Wed Mar 26 20:40:36 2008 +0100
15707 Separate omap24xx specific code from arm1136
15709 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136
15710 to cpu/arm1136/omap24xx.
15712 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
15713 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15715 commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a
15716 Author: Mike Frysinger <vapier@gentoo.org>
15717 Date: Tue Jan 29 18:21:05 2008 -0500
15719 disable caches before booting an app for Blackfin apps
15721 It isn't generally save to execute applications outside of U-Boot with caches
15722 enabled due to the way the Blackfin processor handles caches (requires
15723 software assistance). This patch disables caches before booting an ELF or
15724 just booting raw code. The previous discussion on the patch was that we
15725 wanted to use weaks instead, but that proved to not be feasible when multiple
15726 symbols are involved, which puts us back at the ifdef solution. I've
15727 minimized the ugliness by moving the setup step outside of the main function.
15729 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
15731 commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32
15732 Author: Wolfgang Denk <wd@denx.de>
15733 Date: Sun Apr 13 10:03:54 2008 -0700
15735 ppc: Get rid of unused machine type definitions
15737 Signed-off-by: Wolfgang Denk <wd@denx.de>
15739 commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4
15740 Author: Wolfgang Denk <wd@denx.de>
15741 Date: Sun Apr 13 09:59:26 2008 -0700
15743 Coding Style cleanup; update CHANGELOG
15745 Signed-off-by: Wolfgang Denk <wd@denx.de>
15747 commit 7754f33c6fb7a2c050388d20bf3847038558bdcf
15748 Author: Larry Johnson <lrj@acm.org>
15749 Date: Thu Feb 21 13:58:11 2008 -0500
15751 LM73 bug fix for negative temperatures and cleanup
15753 When the LM73 temperature sensor measures a temperature below 0 C, the
15754 current driver does not perform sign extension, so the result returned is
15755 512 C too high. This patch fixes the problem, and does general cleanup
15758 Signed-off-by: Larry Johnson <lrj@acm.org>
15760 commit 96ef831f713289afba19da0c8f905e99da2b23e0
15761 Author: Guennadi Liakhovetski <lg@denx.de>
15762 Date: Thu Apr 3 13:36:02 2008 +0200
15764 cfi_flash: Support buffered writes on non-standard Spansion NOR flash
15766 Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit
15767 series require different addresses for buffered write commands. Define a
15768 configuration option to support buffered writes on those chips. A more
15769 elegant solution would be to automatically detect those chips by parsing
15770 their CFI records, but that would require introduction of a fixup table
15771 into the cfi_flash driver.
15773 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
15775 commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44
15776 Author: Lee Nipper <lee.nipper@freescale.com>
15777 Date: Thu Apr 10 09:35:06 2008 -0500
15779 mpc83xx: Update DIMM data bus width test to support 40-bit width
15781 32-bit wide ECC memory modules report 40-bit width.
15782 Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'.
15784 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
15785 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15787 commit 5fb5a689d822ca61e814bd523fc930af335242fa
15788 Author: Dave Liu <r63238@freescale.com>
15789 Date: Mon Mar 31 17:05:12 2008 +0800
15791 mpc83xx: Fix the bug of serdes initialization
15793 Currently the serdes will not be initializated due to the
15796 Signed-off-by: Dave Liu <daveliu@freescale.com>
15797 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15799 commit 2000784818f043db7ca60e2846a72d097766b894
15800 Author: Dave Liu <r63238@freescale.com>
15801 Date: Thu Apr 3 16:28:29 2008 +0800
15803 mpc83xx: Fix the SATA clock setting of 837x targets
15805 Currently the SATA controller clock is configured as CSB clock,
15806 usually the CSB clock is 400/333/266MHz.
15808 However, The SATA IP block is only guaranteed to operate up to
15809 200 MHz as stated in the HW spec.
15811 The bug is reported by Joe D'Abbraccio <ljd015@freescale.com>
15813 This patch makes the SATA clock as half of CSB clock.
15815 Signed-off-by: Dave Liu <daveliu@freescale.com>
15816 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15818 commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672
15819 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15820 Date: Wed Apr 2 13:41:21 2008 +0200
15822 mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb'
15824 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
15825 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
15827 commit 97b3ecb575a92fa34c1765229dbc06f2b662f139
15828 Author: Kumar Gala <galak@kernel.crashing.org>
15829 Date: Wed Apr 9 04:20:57 2008 -0500
15831 85xx: Fix detection of MP cpu spin up
15833 We were looking at the wrong memory offset to determine of a secondary
15834 cpu had been spun up or not. Also added a warning message if the
15835 all the secondary cpus we expect don't spin up.
15837 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15839 commit f3e04bdc3f360c66801a9048956e61e41a16edba
15840 Author: Kumar Gala <galak@kernel.crashing.org>
15841 Date: Tue Apr 8 10:45:50 2008 -0500
15843 85xx: Use SVR_SOC_VER instead of SVR_VER
15845 The recent change introduced by 'Update SVR numbers to expand support'
15846 now requires that we use SVR_SOC_VER instead of SVR_VER if we want
15847 to compare against a particular processor id.
15849 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
15851 commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7
15852 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
15853 Date: Fri Apr 11 10:00:35 2008 -0400
15855 ppc4xx: Fix power mgt definitions for PPC440
15857 Corrected DCR addresses of PPC440EP power management registers.
15859 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
15861 commit 950a392464e616b4590bc4501be46e2d7d162dea
15862 Author: Wolfgang Denk <wd@denx.de>
15863 Date: Fri Apr 11 15:11:26 2008 +0200
15865 Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:
15867 Reverting became necessary after it turned out that the patches in
15868 the u-boot-arm repo were modified, and in some cases corrupted.
15870 This reverts the following commits:
15872 066bebd6353e33af3adefc3404560871699e9961
15873 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
15874 c88ae20580b2b01487b4cdcc8b2a113f551aee36
15875 a147e56f03871bba4f05058d5e04ce7deb010b04
15876 d6674e0e2a6a1f033945f78838566210d3f28c95
15877 8c8463cce44d849e37744749b32d38e1dfb12e50
15878 c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
15879 8bf69d81782619187933a605f1a95ee1d069478d
15880 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
15881 a574a73852a527779234e73e17e7597fd8128882
15882 1377b5583a48021d983e1fd565f7d40c89e84d63
15883 1704dc20917b4f71e373e2c888497ee666d40380
15885 Signed-off-by: Wolfgang Denk <wd@denx.de>
15887 commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13
15888 Author: Stefan Roese <sr@denx.de>
15889 Date: Fri Apr 11 07:02:29 2008 +0200
15891 ppc4xx: Update Kilauea defconfig to use device-tree booting as default
15893 This patch reworks the default environment on Kilauea/Haleakala. Now
15894 "net_nfs" for exmaple uses the device-tree style booting formerly know
15895 as "net_nfs_fdt". Also the addresses in RAM were changed because of the
15896 new image booting support, which check for image overwriting. So the
15897 addresses needed togeet adjusted.
15899 Signed-off-by: Stefan Roese <sr@denx.de>
15901 commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28
15902 Author: Stefan Roese <sr@denx.de>
15903 Date: Wed Apr 9 11:58:02 2008 +0200
15905 ppc4xx: Fix Canyonlands default environment to work with new image support
15907 Since the new image support checks for image overwriting, the default
15908 environment needs to get adjusted to use correct addresses.
15910 Signed-off-by: Stefan Roese <sr@denx.de>
15912 commit dfc6c7b647dba7ab86749616f0e9e5740deed422
15913 Author: Stefan Roese <sr@denx.de>
15914 Date: Wed Apr 9 11:54:11 2008 +0200
15916 ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE
15918 The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step
15919 closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But
15920 on 4xx systems _start currently cannot be used for this calculation.
15921 So revert back to the original version for now.
15923 Signed-off-by: Stefan Roese <sr@denx.de>
15925 commit f91374f65eae8b42cac329e06ba1c54728278efb
15926 Author: Michal Simek <monstr@monstr.eu>
15927 Date: Fri Mar 28 12:49:52 2008 +0100
15929 microblaze: Sort microblaze boards in MAKEALL script
15931 commit 62032deb7214c6d9b4396297e2aaa559bc2f8495
15932 Author: Michal Simek <monstr@monstr.eu>
15933 Date: Fri Mar 28 11:58:45 2008 +0100
15935 microblaze: clean microblaze_config.mk
15937 FLAGS are generated by U-BOOT generator.
15938 Board specific FLAGS are in board directory
15940 Signed-off-by: Michal Simek <monstr@monstr.eu>
15942 commit cf5c679ca04a6b54bf53a55b8b9c29335b387287
15943 Author: Michal Simek <monstr@monstr.eu>
15944 Date: Fri Mar 28 12:47:19 2008 +0100
15946 microblaze: xupv2p fix config file for supporting FDT
15948 commit 188dc16b189143573b1ed90e584bf866d75cdd12
15949 Author: Michal Simek <monstr@monstr.eu>
15950 Date: Fri Mar 28 11:53:02 2008 +0100
15952 microblaze: ml401 fix config file for supporting FDT
15954 Signed-off-by: Michal Simek <monstr@monstr.eu>
15956 commit 4c6a6f02e239236261333759997eeaf86b30b54c
15957 Author: Michal Simek <monstr@monstr.eu>
15958 Date: Fri Mar 28 11:22:48 2008 +0100
15960 microblaze: ml401 - add ifdef for GPIO
15962 Signed-off-by: Michal Simek <monstr@monstr.eu>
15964 commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7
15965 Author: Michal Simek <monstr@monstr.eu>
15966 Date: Fri Mar 28 12:13:03 2008 +0100
15968 microblaze: clean uart16550 and uartlite handling
15970 Signed-off-by: Michal Simek <monstr@monstr.eu>
15972 commit 0b20f250877441460fb79d72192954abe8498834
15973 Author: Michal Simek <monstr@monstr.eu>
15974 Date: Fri Mar 28 11:08:31 2008 +0100
15976 microblaze: Add Emaclite driver to Makefile
15978 Signed-off-by: Michal Simek <monstr@monstr.eu>
15980 commit 868cde5310f88234b774878e4f06e79df10a88b3
15981 Author: Michal Simek <monstr@monstr.eu>
15982 Date: Fri Mar 28 11:08:01 2008 +0100
15984 microblaze: Add Emac driver to Makefile
15986 Signed-off-by: Michal Simek <monstr@monstr.eu>
15988 commit 6f961b4f461f6cbb83a467d468a02e6078c2b327
15989 Author: Michal Simek <monstr@monstr.eu>
15990 Date: Fri Mar 28 12:42:29 2008 +0100
15992 microblaze: add Emac ethernet driver
15994 commit 89c53891b18cbafd29ab8931b40e27ad231b6085
15995 Author: Michal Simek <monstr@monstr.eu>
15996 Date: Fri Mar 28 12:41:56 2008 +0100
15998 microblaze: add Emaclite ethernet driver
16000 commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb
16001 Author: Michal Simek <monstr@monstr.eu>
16002 Date: Fri Mar 28 11:04:01 2008 +0100
16004 microblaze: ML401 and XUPV2P remove emac and emaclite reference
16006 Signed-off-by: Michal Simek <monstr@monstr.eu>
16008 commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57
16009 Author: Michal Simek <monstr@monstr.eu>
16010 Date: Fri Mar 28 10:59:32 2008 +0100
16012 microblaze: remove old setting for emac driver
16014 Signed-off-by: Michal Simek <monstr@monstr.eu>
16016 commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57
16017 Author: Michal Simek <monstr@monstr.eu>
16018 Date: Fri Mar 28 10:58:15 2008 +0100
16020 microblaze: Clean Makefile from ancient emac driver
16022 Signed-off-by: Michal Simek <monstr@monstr.eu>
16024 commit ab68f921d9c741830f721c3d879c13a0c5597183
16025 Author: Daniel Hellstrom <daniel@gaisler.com>
16026 Date: Fri Mar 28 10:20:43 2008 +0100
16028 SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information.
16030 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16032 commit 6ed8a43a19bb0275501bc286007daafa923552cf
16033 Author: Daniel Hellstrom <daniel@gaisler.com>
16034 Date: Wed Mar 26 23:38:48 2008 +0100
16036 SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information.
16038 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16040 commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12
16041 Author: Daniel Hellstrom <daniel@gaisler.com>
16042 Date: Wed Mar 26 23:34:47 2008 +0100
16044 SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information.
16046 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16048 commit 823edd8a66ed50af5aaba0c79567f67061e4d79a
16049 Author: Daniel Hellstrom <daniel@gaisler.com>
16050 Date: Fri Mar 28 10:06:52 2008 +0100
16052 SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information.
16054 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16056 commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135
16057 Author: Daniel Hellstrom <daniel@gaisler.com>
16058 Date: Wed Mar 26 23:26:48 2008 +0100
16060 SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information.
16062 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16064 commit b330990c2f36ee4a8bb318360e1c8ba965269ab6
16065 Author: Daniel Hellstrom <daniel@gaisler.com>
16066 Date: Fri Mar 28 10:00:33 2008 +0100
16068 SPARC: Added support for SPARC LEON2 SOC Processor.
16070 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16072 commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a
16073 Author: Daniel Hellstrom <daniel@gaisler.com>
16074 Date: Wed Mar 26 23:00:38 2008 +0100
16076 SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version.
16078 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16080 commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4
16081 Author: Daniel Hellstrom <daniel@gaisler.com>
16082 Date: Wed Mar 26 22:51:29 2008 +0100
16084 SPARC: Added support for SPARC LEON3 SOC processor.
16086 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16088 commit bf3d8b31169546fcddb4737391e1893fb12d033a
16089 Author: Daniel Hellstrom <daniel@gaisler.com>
16090 Date: Fri Mar 28 08:29:26 2008 +0100
16092 SPARC: added SPARC support for new uimage in common code.
16094 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16096 commit 00ab32c85405a4fe65fd4128243086210fc90a21
16097 Author: Daniel Hellstrom <daniel@gaisler.com>
16098 Date: Wed Mar 26 22:36:03 2008 +0100
16100 SPARC: added SPARC board information to the command bdinfo.
16102 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16104 commit c2f02da21a3f37f0878554eebc785e04fdc4e128
16105 Author: Daniel Hellstrom <daniel@gaisler.com>
16106 Date: Fri Mar 28 09:47:00 2008 +0100
16108 SPARC: Added generic support for SPARC architecture.
16110 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16112 commit e54ec0f016803e4d9524ff71f7971bda0c51b287
16113 Author: Stefan Roese <sr@denx.de>
16114 Date: Thu Apr 3 14:50:34 2008 +0200
16116 ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3
16118 This patch fixes a problem with the RGMII setup of the 460GT. The 460GT
16119 has 2 RGMII instances and we need to configure the 2nd RGMII instance
16120 for the EMAC2+3 channels.
16122 Signed-off-by: Stefan Roese <sr@denx.de>
16124 commit c2a545ce33b26d80337f80b533828839249fb1c9
16125 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16126 Date: Wed Apr 2 08:03:56 2008 +0200
16128 MPC8xx: Fix libfdt support introduced in commit 77ff7b74
16130 fdt.c: In function 'ft_cpu_setup':
16131 fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
16132 fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
16133 fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
16134 fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'
16136 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16138 commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b
16139 Author: Andy Fleming <afleming@freescale.com>
16140 Date: Mon Mar 31 20:45:56 2008 -0500
16142 Fix fdt set command to conform to dts spec
16144 The fdt set command was treating properties specified as <00> and <0011>
16145 as byte streams, rather than as an array of cells. As we already have
16146 syntax for expressing the desire for a stream of bytes ([ xx xx ...]),
16147 we should use the <> syntax to describe arrays of cells, which are always
16148 32-bits per element. If we imagine this likely (IMHO) scenario:
16150 > fdt set /ethernet-phy@1 reg <1>
16152 With the old code, this would create a bad fdt, since the reg cell would be
16153 made to be one byte in length. But the cell must be 4 bytes, so this would
16154 break mysteriously.
16156 Also, the dts spec calls for constants inside the angle brackets (<>)
16157 to conform to C constant standards as they pertain to base.
16158 Take this scenario:
16160 > fdt set /ethernet@f00 reg <0xe250000\ 0x1000>
16162 The old fdt command would complain that it couldn't parse that. Or, if you
16163 wanted to specify that a certain clock ran at 33 MHz, you'd be required to
16166 > fdt set /mydev clock <1f78a40>
16168 Whereas the new code will accept decimal numbers.
16170 While I was in there, I extended the fdt command parser to handle property
16171 strings which are split across multiple arguments:
16173 > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 >
16174 > fdt p /ethernet@f00
16176 interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>;
16179 Lastly, the fdt print code was rearranged slightly to print arrays of cells
16180 if the length of the property is a multiple of 4 bytes, and to not print
16183 Signed-off-by: Andy Fleming <afleming@freescale.com>
16185 commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56
16186 Author: Stefan Roese <sr@denx.de>
16187 Date: Wed Apr 2 08:39:33 2008 +0200
16189 ppc4xx: Canyonlands: Init SATA/PCIe port correctly
16191 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
16192 interface. This usage can be configured with the jumper J6. This patch
16193 correctly configures the SATA/PCIe PHY for SATA usage when this jumper
16196 Signed-off-by: Stefan Roese <sr@denx.de>
16198 commit 6fe2946f198481254a6ee9600d7456b8316a4083
16199 Author: Kim Phillips <kim.phillips@freescale.com>
16200 Date: Fri Mar 28 17:37:49 2008 -0500
16202 remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code
16204 finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d,
16205 "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T"
16208 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16210 commit b5873f1732b92a25690e1513b90dfb0d644f6697
16211 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16212 Date: Tue Apr 1 07:30:51 2008 +0200
16214 dataflash: Move CONFIG_HAS_DATAFLASH to Makefile
16216 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16218 commit 2d934ea51f276522b532f870a820e844ff480b5b
16219 Author: Tor Krill <tor@excito.com>
16220 Date: Fri Mar 28 15:29:45 2008 +0100
16222 Add Vitesse 8601 support to TSEC driver
16224 Add phy_info for Vitesse VSC8601.
16225 Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation.
16227 Signed-off-by: Tor Krill <tor@excito.com>
16228 Reviewed-by: Kim Phillips <kim.phillips@freescale.com>
16229 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16231 commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31
16232 Author: Daniel Hellstrom <daniel@gaisler.com>
16233 Date: Mon Mar 31 14:25:00 2008 +0000
16235 SPARC: added SMC91111 driver in and out macros for LEON processors.
16237 This patch makes SPARC/LEON processors able to read and write
16238 to the SMC91111 chip using the chip external I/O bus of the memory
16239 controller. This patchs defines the standard in and out macros
16240 expected by the SMC9111 driver.
16242 To access that I/O bus one must set up the memory controller
16243 (MCTRL or FTMCTRL) correctly. It is assumed that the user sets
16244 up this correctly when the other MCTRL parameters are set up. It
16245 can be set up from the board configuration header file.
16247 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16248 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16250 commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6
16251 Author: Stelian Pop <stelian@popies.net>
16252 Date: Wed Mar 26 18:52:34 2008 +0100
16254 Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards
16256 Signed-off-by: Stelian Pop <stelian@popies.net>
16258 commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3
16259 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16260 Date: Mon Mar 31 21:31:04 2008 +0200
16262 AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile
16264 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16266 commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7
16267 Author: Stelian Pop <stelian@popies.net>
16268 Date: Wed Mar 26 18:52:33 2008 +0100
16270 Add support for AT91SAM9260EK
16272 Support for booting from internal DataFlash, external DataFlash card
16273 or NAND flash is available.
16275 Signed-off-by: Stelian Pop <stelian@popies.net>
16277 commit 1762f13b4aab88b685b1722f17dada247945624b
16278 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16279 Date: Mon Mar 31 21:20:49 2008 +0200
16281 AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile
16283 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16285 commit 761712188b353494defb2b644491ff73d0daaa6f
16286 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16287 Date: Mon Mar 31 21:12:17 2008 +0200
16289 AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile
16291 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16293 commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687
16294 Author: Stelian Pop <stelian@popies.net>
16295 Date: Wed Mar 26 20:52:32 2008 +0100
16297 Port AT91CAP9 to the new headers
16299 Adapt the existing AT91CAP9 code to the new headers and APIs.
16301 Signed-off-by: Stelian Pop <stelian@popies.net>
16303 commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa
16304 Author: Stelian Pop <stelian@popies.net>
16305 Date: Wed Mar 26 19:52:31 2008 +0100
16307 Finish header files reworking
16309 Replace AT91CAP9.h file with several splitted header files coming
16310 from the Linux kernel.
16312 This is part 2 of the replacement: more header imports and edits.
16314 Signed-off-by: Stelian Pop <stelian@popies.net>
16316 commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4
16317 Author: Stelian Pop <stelian@popies.net>
16318 Date: Wed Mar 26 19:52:30 2008 +0100
16320 Import several header files from Linux
16322 Replace AT91CAP9.h file with several splitted header files coming
16323 from the Linux kernel.
16325 This is part 1 of the replacement: pristine header files import.
16327 Signed-off-by: Stelian Pop <stelian@popies.net>
16329 commit a8a78f2d99dc1bd30dc3595da118539b506c6118
16330 Author: Stelian Pop <stelian@popies.net>
16331 Date: Wed Mar 26 20:52:28 2008 +0100
16333 Move at91cap9 specific files to at91sam9 directory
16335 AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
16336 common infrastructure can be used. Let this infrastructure be
16337 named after the AT91SAM9 family, and move the existing AT91CAP9
16338 files to the new place.
16340 Signed-off-by: Stelian Pop <stelian@popies.net>
16342 commit 61106a565870ff503f92b251b94bd7afef889a04
16343 Author: Stelian Pop <stelian@popies.net>
16344 Date: Wed Mar 26 21:52:27 2008 +0100
16346 Use timer_init() instead of board supplied interrupt_init()
16348 The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
16349 the board, so use timer_init() instead of interrupt_init().
16351 Signed-off-by: Stelian Pop <stelian@popies.net>
16353 commit 5604e2178c5218fbfdba2e4293ca7652e829ac25
16354 Author: Stelian Pop <stelian@popies.net>
16355 Date: Wed Mar 26 21:52:36 2008 +0100
16357 Cleanup DataFlash partition handling
16359 DataFlash partition information has become a mess. This patch
16360 defines a single partition scheme for Atmel DataFlashes. This partition
16361 scheme will be used by all AT91CAP9 and AT91SAM9 boards.
16363 Signed-off-by: Stelian Pop <stelian@popies.net>
16365 commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42
16366 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16367 Date: Fri Mar 28 08:47:45 2008 -0500
16369 ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S
16371 When the version_string function in start.S is not 4-byte align,
16372 it will cause the compiler generates "unaligned opcodes detected
16373 in executable segment". This issue affects all ColdFire CPUs.
16374 By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if
16377 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16378 Acked-by: John Rigby <jrigby@freescale.com>
16380 commit bae61eefe15b4d454060a7140e49ae58322be803
16381 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16382 Date: Tue Mar 25 15:41:15 2008 -0500
16384 ColdFire: Add dspi and serial flash support for MCF5445x
16386 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16387 Acked-by: John Rigby <jrigby@freescale.com>
16389 commit 48ead7a7a922fceaf494e352abfab8216a41b417
16390 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16391 Date: Tue Mar 18 17:37:01 2008 -0500
16393 ColdFire: Remove R5200 board
16395 This board never went into production
16397 Signed-off-by: Zachary P. Landau <zachary.landau@labxtechnologies.com>
16398 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16399 Acked-by: John Rigby <jrigby@freescale.com>
16401 commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8
16402 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
16403 Date: Thu Jan 24 14:02:32 2008 -0600
16405 ColdFire: Added M5275EVB support.
16407 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
16408 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16409 Acked-by: John Rigby <jrigby@freescale.com>
16411 commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b
16412 Author: Matthew Fettke <[matthew.fettke@gmail.com]>
16413 Date: Mon Feb 4 15:38:20 2008 -0600
16415 ColdFire: Added MCF5275 cpu support.
16417 Signed-off-by: Matthew Fettke <mfettke@videon-central.com>
16418 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16419 Acked-by: John Rigby <jrigby@freescale.com>
16421 commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b
16422 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16423 Date: Mon Mar 17 12:14:11 2008 -0500
16425 ColdFire: Define bootdelay in configuration file for M52277EVB
16427 Signed-off-by: Matt Wadel <Matt.Waddel@freescale.com>
16428 Acked-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16429 Acked-by: John Rigby <jrigby@freescale.com>
16431 commit 77878f16cedee17161ff2336990970fffc6cea35
16432 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16433 Date: Mon Mar 17 12:09:07 2008 -0500
16435 ColdFire: Fix second memory Chipselect for M5475EVB
16437 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16438 Acked-by: John Rigby <jrigby@freescale.com>
16440 commit 43d60642395a550956cb21d287c8cfa563913d28
16441 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16442 Date: Thu Mar 13 14:26:32 2008 -0500
16444 ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282
16446 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16447 Acked-by: John Rigby <jrigby@freescale.com>
16449 commit eb14ebe813a0cb5d47905228da446a5ad692473b
16450 Author: Larry Johnson <lrj@acm.org>
16451 Date: Sun Mar 30 20:33:04 2008 -0500
16453 ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup
16455 Signed-off-by: Larry Johnson <lrj@acm.org>
16457 commit 02e3892021112f21067d9ed1d04ae4182725ba52
16458 Author: Stefan Roese <sr@denx.de>
16459 Date: Mon Mar 31 12:20:48 2008 +0200
16461 ppc4xx: Small whitespace fix of esd patches
16463 Signed-off-by: Stefan Roese <sr@denx.de>
16465 commit 034394abb524785047c815f00dde8cdbdc1593c5
16466 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16467 Date: Sun Mar 30 18:52:44 2008 +0200
16469 ppc4xx: Cleanup PMC440 board support
16471 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16473 commit a6cc6c37188d85c25d167a4515da86f48d9a583e
16474 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16475 Date: Sun Mar 30 18:52:06 2008 +0200
16477 ppc4xx: Add ptm configuration variables for PMC440
16479 Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms
16480 environment variables.
16482 Cleanup pci_target_init.
16484 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16486 commit 7c91f51a2fe296909147f1646a1412729dd10b1d
16487 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16488 Date: Sun Mar 30 18:01:15 2008 +0200
16490 ppc4xx: Minor updates for DU440 boards
16492 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
16494 commit d5bffeb868d6b4d462f558dac43011027b6644b7
16495 Author: Mike Frysinger <vapier@gentoo.org>
16496 Date: Tue Feb 19 00:54:20 2008 -0500
16498 Blackfin: cleanup and overhaul common board init functions
16500 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16502 commit b86b3416f874358acaf07519e7620cdb2145f75b
16503 Author: Mike Frysinger <vapier@gentoo.org>
16504 Date: Tue Feb 19 00:50:58 2008 -0500
16506 Blackfin: cleanup lib_blackfin/cache.c
16508 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16510 commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44
16511 Author: Mike Frysinger <vapier@gentoo.org>
16512 Date: Sun Mar 30 15:46:13 2008 -0400
16514 Blackfin: unify cpu and boot modes
16516 All of the duplicated code for Blackfin processors and boot modes have been
16517 unified. After all, the core is the same for all processors, just the
16518 peripheral set differs (which gets handled in the drivers).
16520 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16522 commit 880cc4381ea8360248cddcdf87a64566745a5724
16523 Author: Stelian Pop <stelian@popies.net>
16524 Date: Wed Mar 26 22:52:35 2008 +0100
16526 Fix CFG_NO_FLASH compilation.
16528 Many Atmel boards have no "real" (NOR) flash on board, and rely only
16529 on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to
16530 be present in a board configuration file, while still enabling flash
16531 commands like 'flinfo', 'protect', etc.
16533 Signed-off-by: Stelian Pop <stelian@popies.net>
16535 commit 9ce7e53abd039decea1af67aec81bbd5df7a2593
16536 Author: Mike Frysinger <vapier@gentoo.org>
16537 Date: Tue Feb 19 00:58:13 2008 -0500
16539 Blackfin: BF537-stamp: cleanup spi flash driver
16541 This punts the old spi flash driver for a new/generalized one until the
16542 common one can be integrated.
16544 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
16546 commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b
16547 Author: Ben Warren <biggerbadderben@gmail.com>
16548 Date: Sun Mar 30 11:34:34 2008 -0400
16550 Fix macro typo in common/cmd_mii.c
16552 This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I
16553 actually applied the wrong patch.
16555 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16557 commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d
16558 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16559 Date: Sun Mar 30 16:39:53 2008 +0200
16561 use correct at91rm9200 register name in m501sk board
16563 This fixes a naming bug for at91rm9200 lowlevel init code:
16564 NOR boot flash is on chipselect 0, not chipselect 2. This
16565 makes code use the register name from chip datasheets.
16567 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
16569 commit 480ed1dea103a1c8f4591afc77d2de3c7868d983
16570 Author: David Brownell <david-b@pacbell.net>
16571 Date: Fri Jan 18 12:55:00 2008 -0800
16573 use correct at91rm9200 register name
16575 This fixes a naming bug for at91rm9200 lowlevel init code:
16576 NOR boot flash is on chipselect 0, not chipselect 2. This
16577 makes code use the register name from chip datasheets.
16579 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
16581 commit a3543d6dc52b0ba9c64016687cf32d600b31a476
16582 Author: David Brownell <david-b@pacbell.net>
16583 Date: Fri Jan 18 12:45:45 2008 -0800
16585 add missing ARM boards to MAKEALL
16587 Add some missing ARM boards to MAKEALL. These build correctly,
16588 unlike several of the boards already listed.
16590 Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
16592 commit 066bebd6353e33af3adefc3404560871699e9961
16593 Author: Peter Pearse <peter.pearse@arm.com>
16594 Date: Sun Mar 30 11:34:09 2008 +0100
16596 Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c
16597 to prevent compilation error.
16599 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16601 commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
16602 Author: Guennadi Liakhovetski <[lg@denx.de]>
16603 Date: Sun Mar 30 11:32:30 2008 +0100
16605 Support for the MX31ADS evaluation board from Freescale
16607 This patch adds support for the MX31ADS evaluation board from Freescale,
16608 initialization code is copied from RedBoot sources, also provided by Freescale.
16610 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16612 commit c88ae20580b2b01487b4cdcc8b2a113f551aee36
16613 Author: Sascha Hauer <s.hauer@pengutronix.de>
16614 Date: Sun Mar 30 11:32:27 2008 +0100
16616 Phytec Phycore-i.MX31 support
16618 This patch adds support for the Phytec Phycore-i.MX31 board
16620 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16621 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16623 commit a147e56f03871bba4f05058d5e04ce7deb010b04
16624 Author: Sascha Hauer <s.hauer@pengutronix.de>
16625 Date: Sun Mar 30 11:32:24 2008 +0100
16627 mx31 litekit support
16629 This patch adds support for the mx31 litekit board
16631 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16632 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16634 commit d6674e0e2a6a1f033945f78838566210d3f28c95
16635 Author: Sascha Hauer <s.hauer@pengutronix.de>
16636 Date: Sun Mar 30 11:32:21 2008 +0100
16638 add SMSC LAN9x1x Network driver
16640 This patch adds a driver for the following smsc network controllers:
16648 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16649 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16651 commit 8c8463cce44d849e37744749b32d38e1dfb12e50
16652 Author: Sascha Hauer <s.hauer@pengutronix.de>
16653 Date: Sun Mar 30 11:32:16 2008 +0100
16655 add an i2c driver for mx31
16657 This patch adds an i2c driver for Freescale i.MX processors
16659 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16660 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16662 commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
16663 Author: Sascha Hauer <s.hauer@pengutronix.de>
16664 Date: Sun Mar 30 11:30:43 2008 +0100
16666 core support for Freescale mx31
16668 This patch adds the core support for Freescale mx31
16670 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16671 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16673 commit 8bf69d81782619187933a605f1a95ee1d069478d
16674 Author: Sascha Hauer <s.hauer@pengutronix.de>
16675 Date: Sun Mar 30 11:28:46 2008 +0100
16677 Separate omap24xx specific code from arm1136
16679 Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx.
16681 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
16682 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
16684 commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
16685 Author: Peter Pearse <peter.pearse@arm.com>
16686 Date: Sun Mar 30 11:23:05 2008 +0100
16688 Add pmdra into MAKEALL
16690 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
16692 commit a574a73852a527779234e73e17e7597fd8128882
16693 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
16694 Date: Sun Mar 30 11:21:58 2008 +0100
16696 Adds support for the Prodrive PMDRA board, based on a DM6441
16698 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
16700 commit 1377b5583a48021d983e1fd565f7d40c89e84d63
16701 Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]>
16702 Date: Sun Mar 30 11:11:34 2008 +0100
16704 Removes all board specific code from the arch. part for DM644x (DaVinci) boards
16706 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
16708 commit 1704dc20917b4f71e373e2c888497ee666d40380
16709 Author: Dirk Behme <dirk.behme@gmail.com>
16710 Date: Sun Mar 30 11:09:01 2008 +0100
16712 - Remove *_masked() functions as noted by Wolfgang
16713 - Adapt register naming to recent TI spec (sprue26, March 2007)
16714 - Fix reset_timer() handling
16715 - As reported by Pieter [1] the overflow fix introduced a
16716 delay of factor 16 (e.g 2 seconds became 32). While the
16717 overflow fix is basically okay, it missed to divide udelay by
16719 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
16720 - Remove software division of timer count value (DIV(x)
16721 macro) and do it in hardware (TIM_CLK_DIV).
16722 Many thanks to Troy Kisky <troy.kisky@boundarydevices.com>
16723 and Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl> for
16724 the hints & testing!
16726 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
16728 Acked-by: Pieter Voorthuijsen <pieter.voorthuijsen@Prodrive.nl>
16730 commit ac3315c26e143c31680750c9c13f027efbcc887e
16731 Author: Andre Schwarz <andre.schwarz@matrix-vision.de>
16732 Date: Thu Mar 6 16:45:44 2008 +0100
16734 new PHY @ e1000 - 2nd try
16736 Add 82541ER device with latest integrated IGP2 PHY.
16737 Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom.
16739 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
16740 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16742 commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8
16743 Author: Daniel Hellstrom <daniel@gaisler.com>
16744 Date: Fri Mar 28 20:22:53 2008 +0100
16746 SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver.
16748 GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without
16749 a debug link (EDCL). The GRETH core is documented in GRIP.pdf
16750 available at www.gaisler.com.
16752 If the GRETH has GigaBit support (GBIT, Scatter gather, checksum
16753 offloading etc.) can be determined by a bit in the control register.
16754 The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode.
16756 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16757 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16759 commit 233a8bcd94997f3f345833a3b82e836222f2a206
16760 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
16761 Date: Mon Mar 17 17:08:22 2008 -0500
16763 Add CONFIG_MII_INIT in cmd_mii.c
16765 Provide common configuration in do_mii() to execute mii_init()
16766 for all cpu architectures
16768 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16769 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16771 commit f605479de2deb11e834f31dfdb0af107c86aced6
16772 Author: Tsi-Chung Liew <Tsi-Chung.Liew@freescale.com>
16773 Date: Mon Mar 17 17:08:16 2008 -0500
16775 ColdFire: Fix FEC transmit issue for MCF5275
16777 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
16778 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16780 commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746
16781 Author: Aras Vaichas <arasv@magtech.com.au>
16782 Date: Wed Mar 26 09:43:57 2008 +1100
16784 DHCP request fix for Windows Server 2003
16786 Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional
16787 delay before sending "DHCP Request" in net/bootp.c. Required to overcome
16788 interoperability problems with Windows Server 200x DHCP server when U-Boot
16789 client responds too fast for server to handle.
16791 Signed-off-by: Aras Vaichas <arasv@magtech.com.au>
16792 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
16794 commit 97bf85d784fbed485e652eb907589ad0d5cb7262
16795 Author: Daniel Hellstrom <daniel@gaisler.com>
16796 Date: Fri Mar 28 20:40:19 2008 +0100
16798 MTD/CFI: flash_read64 is defined a weak function (for SPARC)
16800 SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address.
16801 SPARC CPUs implement flash_read64 which calls __raw_readq.
16803 For current SPARC architectures (LEON2 and LEON3) each read from the
16804 FLASH must lead to a cache miss. This is because FLASH can not be set
16805 non-cacheable since program code resides there, and alternatively disabling
16806 cache is poor from performance view, or doing a cache flush between each
16807 read is even poorer.
16809 Forcing a cache miss on a SPARC is done by a special instruction "lda" -
16810 load alternative space, the alternative space number (ASI) is processor
16811 implementation spcific and can be found by including <asm/processor.h>.
16813 Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
16815 commit 70431e8a7393b6b793f77957f95b999fc9a269b8
16816 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
16817 Date: Fri Mar 28 15:41:25 2008 +0100
16819 Make MPC83xx one step closer to full relocation.
16821 Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx
16822 and use GOT relative reference.
16824 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
16825 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16827 commit 5b2793a3f3de34d439232b05acc8af67a028fd35
16828 Author: Michael Barkowski <michael.barkowski@freescale.com>
16829 Date: Thu Mar 27 14:34:43 2008 -0400
16831 mpc8323erdb: fix EEPROM page size and get MAC from EEPROM
16833 This patch fixes eeprom page size so that you can now write more than
16834 64 bytes at a time.
16836 It also makes the board take MAC addresses, if found, from EEPROM.
16838 User should place up to 4 addresses at offset 0x7f00, for
16839 eth{,1,2,3}addr. Any unused addresses should be zero. This group of
16840 four six-byte values should have it's CRC at the end. crc32 and
16841 eeprom commands can be used to accomplish this.
16843 If CRC fails, MAC addresses come from the environment. If CRC
16844 succeeds, the environment is overwritten at startup.
16846 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
16847 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16849 commit 8f325cff31f6e745e6540014b131b9a97f61944c
16850 Author: Michael Barkowski <michael.barkowski@freescale.com>
16851 Date: Fri Mar 28 15:15:38 2008 -0400
16853 mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE
16855 Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB
16856 controller on the PCI bus in Linux on the MPC8323ERDB.
16858 This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's
16861 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
16862 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16864 commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9
16865 Author: Kim Phillips <kim.phillips@freescale.com>
16866 Date: Fri Mar 28 10:19:07 2008 -0500
16868 mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code
16870 in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6,
16871 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing
16872 and processor ID display. Add REVID_{MAJ,MIN}OR macros to make
16873 REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR
16874 convenience macros.
16876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16878 commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af
16879 Author: Kim Phillips <kim.phillips@freescale.com>
16880 Date: Fri Mar 28 10:18:53 2008 -0500
16882 mpc83xx: display ddr frequency in board_add_ram_info banner
16884 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16886 commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482
16887 Author: Kim Phillips <kim.phillips@freescale.com>
16888 Date: Fri Mar 28 10:18:40 2008 -0500
16890 mpc83xx: unreinvent mem_clk
16892 delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to
16893 mem_*_clk for consistency's sake.
16895 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16897 commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536
16898 Author: Kim Phillips <kim.phillips@freescale.com>
16899 Date: Fri Mar 28 14:31:23 2008 -0500
16901 mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards
16903 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16905 commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393
16906 Author: Dave Liu <r63238@freescale.com>
16907 Date: Wed Mar 26 22:57:19 2008 +0800
16909 mpc83xx: enable the SATA interface on mpc837xemds board
16911 Enable the first two SATA interfaces on MPC837xEMDS board,
16912 The two SATA ports are on LYNX1. (SATA0/1 on J4/5)
16914 Signed-off-by: Dave Liu <daveliu@freescale.com>
16915 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16917 commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a
16918 Author: Dave Liu <r63238@freescale.com>
16919 Date: Wed Mar 26 22:56:36 2008 +0800
16921 mpc83xx: initialize serdes for MPC837xEMDS boards
16923 This patch is stolen from Anton Vorontsov's patch
16924 for mpc837xerdb boards.
16926 The reference clk and xcorevdd voltage of serdes1/2
16927 is same between mpc837xemds and mpc837xerdb.
16929 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE
16930 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE
16931 8379E: LYNX1- 2 SATA LYNX2- 2 SATA
16933 Signed-off-by: Dave Liu <daveliu@freescale.com>
16934 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
16936 commit cc8e839abc80887ae832767b5930d40edd6d7eb7
16937 Author: Stefan Roese <sr@denx.de>
16938 Date: Fri Mar 28 14:09:04 2008 +0100
16940 ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision
16942 Canyonlands (460EX) shares the first PCIe interface with the SoC SATA
16943 interface. This usage can be configured with the jumper J6. This patch
16944 displays the current configuration upon bootup and changes the PCIe
16945 init loop, to only initialize the availabel PCIe slots.
16947 Signed-off-by: Stefan Roese <sr@denx.de>
16949 commit 90447ecbbac8572457b6d8903073ac3f120995ba
16950 Author: Tor Krill <tor@excito.com>
16951 Date: Fri Mar 28 11:29:10 2008 +0100
16953 MTD/CFI: Add support for 16bit legacy AMD flash
16955 Add entry for 512Kx16 AMD flash to jedec_table.
16956 Read out 16bit device id if chipwidth is 16bit.
16957 Fixed coding style after Stefans feedback
16959 Signed-off-by: Tor Krill <tor@excito.com>
16961 commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e
16962 Author: Stefan Roese <sr@denx.de>
16963 Date: Fri Mar 28 11:02:53 2008 +0100
16965 ppc: Small change to CFG_MEM_TOP_HIDE description
16967 Signed-off-by: Stefan Roese <sr@denx.de>
16969 commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00
16970 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16971 Date: Thu Mar 27 15:44:12 2008 +0900
16973 sh: Add support stat structure and stat.h
16975 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16977 commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09
16978 Author: Mark Jonas <toertel@gmail.com>
16979 Date: Sat Mar 22 19:27:52 2008 +0100
16981 sh: Removed warning when compiling drivers/serial/serial_sh.c.
16983 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
16984 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16986 commit f309fa38929ffba71230c02330ffa42f4bba6333
16987 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16988 Date: Wed Mar 12 18:02:57 2008 +0900
16990 sh: Remove disable_ctrlc function from R7780MP
16992 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16994 commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3
16995 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
16996 Date: Wed Mar 12 17:55:15 2008 +0900
16998 sh: Add maintainer of R7780MP to MAINTAINER file
17000 Update MAINTAINER entry for R7780MP. And fix maintainer's name.
17002 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17004 commit f5e2466f7baa887a7df0c536333eea8231333497
17005 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17006 Date: Tue Mar 25 17:11:24 2008 +0900
17008 sh: Add support Renesas Solutions R2D plus board
17010 R2D plus is SH reference board used with SH7751R.
17011 This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface,
17012 one PCI bus, VGA, and two Ethernet controller.
17014 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17016 commit e92c95180bb5bc5fd4051598a9d60beaba48988d
17017 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17018 Date: Wed Mar 12 12:15:29 2008 +0900
17020 sh: Add support SH4 cache control
17022 Add support SH4 cache control and flash_cache function
17024 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17026 commit 28e5efde4d925fcb34901d0030d0648de2da7e89
17027 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17028 Date: Mon Mar 24 01:53:01 2008 +0900
17030 sh: Add support PCI host driver for SH7751/SH7751R
17032 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17034 commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721
17035 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17036 Date: Mon Mar 24 02:11:26 2008 +0900
17038 sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci
17040 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17042 commit 566933278101c144d75361ea682678a326c1290d
17043 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17044 Date: Wed Mar 12 12:10:28 2008 +0900
17046 sh: Add support SuperH SH7751/SH7751R
17048 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17050 commit 3313e0e26224fc9a0c445124f3455058c696df84
17051 Author: Mark Jonas <toertel@gmail.com>
17052 Date: Mon Mar 10 11:37:10 2008 +0100
17054 sh: Added support for SH7720 based board MPR2.
17056 Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
17057 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17059 commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f
17060 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17061 Date: Thu Mar 6 14:05:53 2008 +0900
17063 sh: Fix receive FIFO level register of SH4A
17065 Receive FIFO level register is different in SH4A.
17066 Because register is different, cannot occasionally receive data.
17068 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17070 commit c133c1fb0b590662206b0eba70f4478ee0300a9a
17071 Author: Yusuke Goda <goda.yusuke@renesas.com>
17072 Date: Tue Mar 11 12:55:12 2008 +0900
17074 sh: Add support Renesas Solutions R7780MP
17076 Renesas Solutions R7780MP is a reference board on SH7780.
17077 This board has serial, 10/100 base Ethernet deivice, CF slot
17078 and VGA devices. This board can set extension board.
17079 Extension board has 10/100/1000 base Ethernet device, PCI slot,
17082 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17083 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17085 commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28
17086 Author: Yusuke Goda <goda.yusuke@renesas.com>
17087 Date: Wed Mar 5 14:30:02 2008 +0900
17089 sh: Add support PCI of SuperH and SH7780
17091 This patch add support PCI of SuperH base code and SH7780 specific code.
17093 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17094 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17096 commit b55523efff2ae11f0b9ae3cc405893c32eb78156
17097 Author: Yusuke Goda <goda.yusuke@renesas.com>
17098 Date: Wed Mar 5 14:23:26 2008 +0900
17100 sh: Add support SH7780
17102 SH7780 is CPU of Renesas Technology.
17106 - DDR-SDRAM controller
17109 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17110 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17112 commit c2042f5952a686c414031309b8f244513bf578f0
17113 Author: goda.yusuke <goda.yusuke@renesas.com>
17114 Date: Fri Jan 25 20:46:36 2008 +0900
17116 sh: Add support Renesas Solutions Migo-R board
17118 Migo-R is a board based on SH7722 and has may devices.
17119 In this patch, supported SCIF, NOR flash and Ethernet.
17121 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
17122 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
17124 commit 74d1e66d22dac91388bc538b2fe19f735edc5b82
17125 Author: Bartlomiej Sieka <tur@semihalf.com>
17126 Date: Thu Mar 27 15:06:40 2008 +0100
17128 Fix host tool build breakage, take two
17130 Revert commit 87c8431f and fix build breakage so that the build continues
17131 to work on FC systems.
17133 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
17135 commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6
17136 Author: Stefan Roese <sr@denx.de>
17137 Date: Wed Mar 19 09:36:47 2008 +0100
17139 ppc4xx: Enable ECC on LWMON5
17141 Since all ECC related problems seem to be resolved on LWMON5, this patch
17142 now enables ECC support.
17144 We have to write the ECC bytes by zeroing and flushing in smaller
17145 steps, since the whole 256MByte takes too long for the external
17148 Signed-off-by: Stefan Roese <sr@denx.de>
17150 commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb
17151 Author: Larry Johnson <lrj@acm.org>
17152 Date: Mon Mar 17 11:10:35 2008 -0500
17154 ppc4xx: Updates to Korat-specific code
17156 This patch contains updates for changes for the Korat PPC440EPx board.
17157 These changes include:
17159 (1) Support for "permanent" and "upgradable" copies of U-Boot, as
17160 described in the new "doc/README.korat" file;
17162 (2) a new memory map for the registers in the board's CPLD;
17164 (3) a revised format for manufacturer's data in serial EEPROM; and
17166 (4) changes to track updates to U-Boot for the Sequoia board.
17168 Signed-off-by: Larry Johnson <lrj@acm.org>
17170 commit f766cdf89b3a2a7634b8c5869f606150e332036c
17171 Author: Markus Brunner <super.firetwister@gmail.com>
17172 Date: Thu Mar 27 10:46:25 2008 +0100
17174 ppc4xx: PPC405EP Set EMAC noise filter bits
17176 This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359
17177 which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally
17178 disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set.
17180 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
17181 Signed-off-by: Stefan Roese <sr@denx.de>
17183 commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991
17184 Author: Mike Nuss <mike@terascala.com>
17185 Date: Wed Feb 20 11:54:20 2008 -0500
17187 ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx
17189 On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured
17190 after startup to change the speed of the clocks. This patch adds the
17191 option CFG_PLL_RECONFIG. If this option is set to 667, the CPU
17192 initialization code will reconfigure the PLL to run the system with a CPU
17193 frequency of 667MHz and PLB frequency of 166MHz, without the need for an
17196 Signed-off-by: Mike Nuss <mike@terascala.com>
17197 Acked-by: Stefan Roese <sr@denx.de>
17199 commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1
17200 Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17201 Date: Thu Mar 27 09:12:40 2008 +0100
17203 new-image: Fix host tool build breakage
17205 Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
17207 commit 6fb4b640562a10daff0dbe537638d511b5b48650
17208 Author: Stefan Roese <sr@denx.de>
17209 Date: Thu Mar 27 10:24:03 2008 +0100
17211 ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined
17213 Signed-off-by: Stefan Roese <sr@denx.de>
17215 commit 9462732a3ec551c11862450902cd8ee1bedea6d9
17216 Author: Stefan Roese <sr@denx.de>
17217 Date: Wed Mar 19 10:23:43 2008 +0100
17219 ppc4xx: Add fdt support to Prodrive alpr
17221 Since this board will probably be ported to arch/powerpc in the
17222 near future, we add device tree support now. This way we are
17223 "ready" for arch/powerpc from now on.
17225 Signed-off-by: Stefan Roese <sr@denx.de>
17227 commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150
17228 Author: Pieter Voorthuijsen <pieter.voorthuijsen@prodrive.nl>
17229 Date: Mon Mar 17 09:27:56 2008 +0100
17231 ppc4xx: Enable cache support on the ALPR board
17233 Signed-off-by: Pieter Voorthuijsen <pv@prodrive.nl>
17235 commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69
17236 Author: Stefan Roese <sr@denx.de>
17237 Date: Wed Mar 26 10:14:11 2008 +0100
17239 ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched"
17241 If CFG_MEM_TOP_HIDE is defined in the board config header, this specified
17242 memory area will get subtracted from the top (end) of ram and won't get
17243 "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel
17244 should gets passed the now "corrected" memory size and won't touch it
17245 either. This should work for arch/ppc and arch/powerpc. Only Linux board
17246 ports in arch/powerpc with bootwrapper support, which recalculate the
17247 memory size from the SDRAM controller setup, will have to get fixed
17248 in Linux additionally.
17250 This patch enables this config option on some PPC440EPx boards as a workaround
17251 for the CHIP 11 errata. Here the description from the AMCC documentation:
17253 CHIP_11: End of memory range area restricted access.
17257 The 440EPx DDR controller does not acknowledge any
17258 transaction which is determined to be crossing over the
17259 end-of-memory-range boundary, even if the starting address is
17260 within valid memory space. Any such transaction from any PLB4
17261 master will result in a PLB time-out on PLB4 bus.
17264 In case of such misaligned bursts, PLB4 masters will not
17265 retrieve any data at all, just the available data up to the
17266 end of memory, especially the 440 CPU. For example, if a CPU
17267 instruction required an operand located in memory within the
17268 last 7 words of memory, the DCU master would burst read 8
17269 words to update the data cache and cross over the
17270 end-of-memory-range boundary. Such a DCU read would not be
17271 answered by the DDR controller, resulting in a PLB4 time-out
17272 and ultimately in a Machine Check interrupt. The data would
17273 be inaccessible to the CPU.
17276 Forbid any application to access the last 256 bytes of DDR
17277 memory. For example, make your operating system believe that
17278 the last 256 bytes of DDR memory are absent. AMCC has a patch
17279 that does this, available for Linux.
17281 This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards:
17282 lwmon5, korat, sequoia
17284 The other remaining 440EPx board were intentionally not included
17285 since it is not clear to me, if they use the end of ram for some
17286 other purpose. This is unclear, since these boards have CONFIG_PRAM
17287 defined and even comments like this:
17290 /* esd expects pram at end of physical memory.
17291 * So no logbuffer at the moment.
17294 It is strongly recommended to not use the last 256 bytes on those
17295 boards too. Patches from the board maintainers are welcome.
17297 Signed-off-by: Stefan Roese <sr@denx.de>
17299 commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b
17300 Author: Stefan Roese <sr@denx.de>
17301 Date: Thu Mar 27 10:09:05 2008 +0100
17303 ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT)
17305 Signed-off-by: Stefan Roese <sr@denx.de>
17307 commit d56a3ce179688cde61073a3690e21703d68fafd7
17308 Author: Stefan Roese <sr@denx.de>
17309 Date: Tue Mar 25 17:51:13 2008 +0100
17311 ppc4xx: Correctly pass phyiscal FLASH base address into dtb
17313 The routine ft_board_setup() configures the EBC NOR mappings for the
17314 Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from
17315 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS
17316 problem, we need to pass the corrected address here too.
17318 Signed-off-by: Stefan Roese <sr@denx.de>
17320 commit 9ad31989de12ce5c67b07c4867ead47465655c4b
17321 Author: Stefan Roese <sr@denx.de>
17322 Date: Wed Mar 19 16:35:12 2008 +0100
17324 ppc4xx: Fix compilation warning in 4xx_enet.c
17326 Signed-off-by: Stefan Roese <sr@denx.de>
17328 commit 4c9e855734c523900322a7c3cdd9099b4f51b51d
17329 Author: Stefan Roese <sr@denx.de>
17330 Date: Wed Mar 19 16:20:49 2008 +0100
17332 ppc4xx: Add AMCC Glacier 406GT eval board support
17334 This patch adds support for the AMCC Glacier 460GT eval board.
17335 The main difference to the Canyonlands board are listed here:
17337 - 4 ethernet ports instead of 2
17341 Currently EMAC2+3 are not working. This will be fixed in a later
17344 Signed-off-by: Stefan Roese <sr@denx.de>
17346 commit d8bd643141af4710d7f1b69bbab6b760de0af0a1
17347 Author: Stefan Roese <sr@denx.de>
17348 Date: Thu Mar 27 08:47:26 2008 +0100
17350 ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear
17352 Signed-off-by: Stefan Roese <sr@denx.de>
17354 commit b9670dd85be6e0496ef2e231043c23cad9b1d903
17355 Author: Anatolij Gustschin <agust@denx.de>
17356 Date: Wed Mar 26 21:05:43 2008 +0100
17358 Fix out of tree building issue
17360 Currently U-Boot building in some external directory
17361 doesn't work. This patch tries to fix the problem.
17363 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17365 commit d4ee711d8a5c366ee3f857c26b927d12e66614ff
17366 Author: Anatolij Gustschin <agust@denx.de>
17367 Date: Wed Mar 26 18:13:33 2008 +0100
17369 README: update documentation (availability, links, etc.)
17373 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17375 commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f
17376 Author: Anatolij Gustschin <agust@denx.de>
17377 Date: Wed Mar 26 17:47:44 2008 +0100
17379 Fix compilation error in cmd_usb.c
17381 This patch fixes compilation error
17382 cmd_usb.c: In function 'do_usb':
17383 cmd_usb.c:552: error: void value not ignored as it ought to be
17385 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17387 commit d8c82db482d6b535d12b419d6440b88bf7091c9b
17388 Author: Timur Tabi <timur@freescale.com>
17389 Date: Fri Mar 14 17:45:29 2008 -0500
17391 Add support for setting the I2C bus speed in fsl_i2c.c
17393 Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying
17394 the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro,
17395 but fsl_i2c.c ignores it and uses conservative value when programming the
17398 Signed-off-by: Timur Tabi <timur@freescale.com>
17399 Acked-by: Andy Fleming <afleming@freescale.com>
17401 commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e
17402 Author: Wolfgang Denk <wd@denx.de>
17403 Date: Thu Mar 27 00:03:57 2008 +0100
17405 Coding style cleanup, update CHANGELOG
17407 Signed-off-by: Wolfgang Denk <wd@denx.de>
17409 commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4
17410 Author: Dave Liu <r63238@freescale.com>
17411 Date: Wed Mar 26 22:55:32 2008 +0800
17413 drivers: add the support for Freescale SATA controller
17415 Add the Freescale on-chip SATA controller driver to u-boot,
17416 The SATA controller is used on the 837x and 8315 targets,
17417 The driver can be used to load kernel, fs and dtb.
17420 - 1.5/3 Gbps link speed
17421 - LBA48, LBA28 support
17422 - DMA and FPDMA support
17423 - Two ports support
17425 Signed-off-by: Dave Liu <daveliu@freescale.com>
17427 commit bede87f4c87c3ccd868cc60ebf792e0560c6d024
17428 Author: Dave Liu <r63238@freescale.com>
17429 Date: Wed Mar 26 22:54:44 2008 +0800
17431 ata: add the readme for SATA command line
17433 Signed-off-by: Dave Liu <daveliu@freescale.com>
17435 commit cd54081cd479e542fc399b8a40651ff11a1ad849
17436 Author: Dave Liu <r63238@freescale.com>
17437 Date: Wed Mar 26 22:53:24 2008 +0800
17439 ata: enable the sata initialize on boot up
17441 Signed-off-by: Dave Liu <daveliu@freescale.com>
17443 commit 69386383c5c2b323c66495b0b0cef6a9714d83bf
17444 Author: Dave Liu <r63238@freescale.com>
17445 Date: Wed Mar 26 22:52:36 2008 +0800
17447 ata: add the fis struct for SATA
17449 Signed-off-by: Dave Liu <daveliu@freescale.com>
17451 commit ffc664e80dfb2e17de0df5ad39e91a02e9c361bc
17452 Author: Dave Liu <r63238@freescale.com>
17453 Date: Wed Mar 26 22:51:44 2008 +0800
17455 ata: add the libata support
17457 add simple libata support in u-boot
17459 Signed-off-by: Dave Liu <daveliu@freescale.com>
17461 commit 8e9bb43429e50df55fa41932cbe65841ff579220
17462 Author: Dave Liu <r63238@freescale.com>
17463 Date: Wed Mar 26 22:50:45 2008 +0800
17465 ata: make the ata_piix driver using new SATA framework
17467 original ata_piix driver is using IDE framework, not real
17468 SATA framework. For now, the ata_piix driver is only used
17469 by x86 sc520_cdp board. This patch makes the ata_piix driver
17470 use the new SATA framework, so
17472 - remove the duplicated command stuff
17473 - remove the CONFIG_CMD_IDE define in the sc520_cdp.h
17474 - add the CONFIG_CMD_SATA define to sc520_cdp.h
17476 Signed-off-by: Dave Liu <daveliu@freescale.com>
17478 commit c7057b529c3c3cb9c0ac9060686a4068f1491bbe
17479 Author: Dave Liu <r63238@freescale.com>
17480 Date: Wed Mar 26 22:49:44 2008 +0800
17482 ata: add the support for SATA framework
17484 - add the SATA framework
17485 - add the SATA command line
17487 Signed-off-by: Dave Liu <daveliu@freescale.com>
17489 commit 83c7f470a4ce94f33600f11ae85ce4dcf00aa90c
17490 Author: Dave Liu <r63238@freescale.com>
17491 Date: Wed Mar 26 22:48:18 2008 +0800
17493 ata: merge the header of ata_piix driver
17495 move the sata.h from include/ to drivers/block/ata_piix.h
17497 Signed-off-by: Dave Liu <daveliu@freescale.com>
17499 commit 9eef62804d9695425b24c87b46a61a7fa74afee0
17500 Author: Dave Liu <r63238@freescale.com>
17501 Date: Wed Mar 26 22:47:06 2008 +0800
17503 ata: merge the ata_piix driver
17505 move the cmd_sata.c from common/ to drivers/ata_piix.c,
17506 the cmd_sata.c have some part of ata_piix controller drivers.
17507 consolidate the driver to have better framework.
17509 Signed-off-by: Dave Liu <daveliu@freescale.com>
17511 commit b9e749e95354f33eb5dc6653c6db7d502adb95fe
17512 Author: Markus Klotzbuecher <mk@denx.de>
17513 Date: Wed Mar 26 18:26:43 2008 +0100
17515 USB, Storage: fix a bug introduced in commit
17516 f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info
17517 to only print only information on one storage device, but not for
17520 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17522 commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360
17523 Author: Anatolij Gustschin <agust@denx.de>
17524 Date: Wed Mar 26 17:47:44 2008 +0100
17526 Fix compilation error in cmd_usb.c
17528 This patch fixes compilation error
17529 cmd_usb.c: In function 'do_usb':
17530 cmd_usb.c:552: error: void value not ignored as it ought to be
17532 Signed-off-by: Anatolij Gustschin <agust@denx.de>
17533 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17535 commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15
17536 Author: Kumar Gala <galak@kernel.crashing.org>
17537 Date: Wed Mar 26 08:53:53 2008 -0500
17539 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
17541 Provide a board_lmb_reserve helper function to ensure we reserve
17542 the page of memory we are using for the boot page translation code.
17544 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17546 commit 79679d80021ab095e639e250ca472fe526da02e2
17547 Author: Kumar Gala <galak@kernel.crashing.org>
17548 Date: Wed Mar 26 08:34:25 2008 -0500
17550 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
17552 The following changes are needed to be inline with ePAPR v0.81:
17554 * r4, r5 and now always set to 0 on boot release
17555 * r7 is used to pass the size of the initial map area (IMA)
17556 * EPAPR_MAGIC value changed for book-e processors
17557 * changes in the spin table layout
17558 * spin table supports a 64-bit physical release address
17560 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17562 commit 25eedb2c1958a13110c7de1fc809b624053cc69c
17563 Author: Jon Loeliger <jdl@freescale.com>
17564 Date: Wed Mar 19 15:02:07 2008 -0500
17566 FSL: Clean up board/freescale/common/Makefile
17568 Each file that can be built here now follows some
17569 CONFIG_ option so that they are appropriately built
17570 or not, as needed. And CONFIG_ defines were added
17571 to various board config files to make sure that happens.
17573 The other board/freescale/*/Makefiles no longer need
17574 to reach up and over into ../common to build their
17575 individually needed files any more.
17577 Boards that are CDS specific were renamed with cds_ prefix.
17579 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17581 commit a5af4b358a7caa9c0aa374d4d894bf762ec37669
17582 Author: Kumar Gala <galak@kernel.crashing.org>
17583 Date: Wed Feb 27 22:00:27 2008 -0600
17585 85xx: Fix merge duplication
17587 ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate.
17589 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17591 commit 5893b3d0a4084f87a06a5d3dc03db91206818941
17592 Author: James Yang <James.Yang@freescale.com>
17593 Date: Tue Feb 12 16:35:07 2008 -0600
17595 85xx: Expand CCSR space with more DDR controller registers.
17597 Signed-off-by: James Yang <James.Yang@freescale.com>
17598 Signed-off-by: Jon Loeliger <jdl@freescale.com>
17599 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17601 commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85
17602 Author: James Yang <James.Yang@freescale.com>
17603 Date: Fri Feb 8 18:05:08 2008 -0600
17605 85xx: Speed up get_ddr_freq() and get_bus_freq()
17607 get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were
17608 called. However, get_sys_info() recalculates extraneous information when
17609 called each time. Have get_ddr_freq() and get_bus_freq() return memoized
17610 values from global_data instead.
17612 Signed-off-by: James Yang <James.Yang@freescale.com>
17613 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17615 commit e9ea679918fbc9a53fa2f2a904aac874ea736036
17616 Author: James Yang <James.Yang@freescale.com>
17617 Date: Fri Feb 8 16:46:27 2008 -0600
17619 85xx: Show DDR memory data rate in addition to the memory clock frequency.
17621 Show the DDR memory data rate in addition to the memory clock
17622 frequency. For DDR/DDR2 memories the memory data rate is 2x the
17625 Signed-off-by: James Yang <James.Yang@freescale.com>
17626 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17628 commit 591933ca6eabc440e6ed6967233aaf56fce464a3
17629 Author: James Yang <James.Yang@freescale.com>
17630 Date: Fri Feb 8 16:44:53 2008 -0600
17632 85xx: get_tbclk() speed up and rounding fix
17634 Speed up get_tbclk() by referencing pre-computed bus clock
17635 frequency value from global data instead of sys_info_t. Fix
17636 rounding of result to nearest; previously it was rounding
17639 Signed-off-by: James Yang <James.Yang@freescale.com>
17640 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17642 commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6
17643 Author: Andy Fleming <afleming@freescale.com>
17644 Date: Wed Feb 6 01:19:40 2008 -0600
17646 Update SVR numbers to expand support
17648 FSL has taken to using SVR[16:23] as an SOC sub-version field. This
17649 is used to distinguish certain variants within an SOC family. To
17650 account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
17651 constants to reflect the larger value. We also add SVR numbers for all
17652 of the current variants. Finally, to make things neater, rather than
17653 use an enormous switch statement to print out the CPU type, we create
17654 and array of SVR/name pairs (using a macro), and print out the CPU name
17655 that matches the SVR SOC version.
17657 Signed-off-by: Andy Fleming <afleming@freescale.com>
17659 commit b83eef440cf3cef816172ccbb5897ccd8e403cf3
17660 Author: Andy Fleming <afleming@freescale.com>
17661 Date: Wed Feb 6 01:12:57 2008 -0600
17663 Add the Freescale PCI device IDs
17665 Signed-off-by: Andy Fleming <afleming@freescale.com>
17667 commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd
17668 Author: Kumar Gala <galak@kernel.crashing.org>
17669 Date: Thu Feb 14 11:04:23 2008 -0600
17671 85xx: Added support for multicore boot mechanism
17673 Added the cpu command that provides a generic mechanism to get status,
17674 reset, and release secondary cores in multicore processors.
17676 Added support for using the ePAPR defined spin-table mechanism on 85xx.
17678 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17679 Signed-off-by: Andy Fleming <afleming@freescale.com>
17681 commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64
17682 Author: Kumar Gala <galak@kernel.crashing.org>
17683 Date: Thu Jan 17 16:48:33 2008 -0600
17685 85xx: Added support for multicore boot mechanism
17687 Added the cpu command that provides a generic mechanism to get status,
17688 reset, and release secondary cores in multicore processors.
17690 Added support for using the ePAPR defined spin-table mechanism on 85xx.
17692 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17694 commit f69766e4b5d47ecd3aa58677a8da875694f364f2
17695 Author: Kumar Gala <galak@kernel.crashing.org>
17696 Date: Wed Jan 30 14:55:14 2008 -0600
17698 85xx: Add the concept of CFG_CCSRBAR_PHYS
17700 When we go to 36-bit physical addresses we need to keep the concept of
17701 the physical CCSRBAR address seperate from the virtual one.
17703 For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR
17705 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
17707 commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e
17708 Author: Wolfgang Denk <wd@denx.de>
17709 Date: Wed Mar 26 15:38:47 2008 +0100
17711 Coding style cleanup.
17713 Signed-off-by: Wolfgang Denk <wd@denx.de>
17715 commit da8808df7a9cef5a3d2ee286ef9ebf9de1780660
17716 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17717 Date: Wed Mar 26 13:02:13 2008 +0100
17719 Add CFG_RTC_DS1337_NOOSC to turn off OSC output
17721 The default settings for RTC DS1337 keeps the OSC
17722 output, 32,768 Hz, on. This add CFG_RTC_DS1337_NOOSC to
17725 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
17727 commit 438a4c11260b4ea9805039b0b4f92f9df5306b02
17728 Author: Wolfgang Denk <wd@denx.de>
17729 Date: Wed Mar 26 11:48:46 2008 +0100
17731 Cleanup coding style, update CHANGELOG
17733 Signed-off-by: Wolfgang Denk <wd@denx.de>
17735 commit 218ca724c08ca8a649f0917cf201cf23d4b33f39
17736 Author: Wolfgang Denk <wd@denx.de>
17737 Date: Wed Mar 26 10:40:12 2008 +0100
17739 README: update documentation (availability, links, etc.)
17741 Signed-off-by: Wolfgang Denk <wd@denx.de>
17743 commit f6b44e0e4d18fe507833a0f76d24a9aa72c123f1
17744 Author: Aras Vaichas <arasv@magtech.com.au>
17745 Date: Tue Mar 25 12:09:07 2008 +1100
17747 USB Storage, add meaningful return value
17749 This patch changes the "usb storage" command to return success if it
17750 finds a USB storage device, otherwise it returns error.
17752 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
17754 commit 18e69a35efbb078403db0c0063986470dad7d082
17755 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17756 Date: Fri Mar 14 23:20:18 2008 +0300
17758 83xx/fdt_support: let user specifiy FSL USB Dual-Role controller role
17760 Linux understands "host" (default), "peripheral" and "otg" (broken).
17761 Though, U-Boot doesn't restrict dr_mode variable to these values (think
17762 of renames in future).
17764 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17765 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17767 commit c7604783b236e368f225efb7b3efb418fe20b404
17768 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17769 Date: Fri Mar 14 23:20:30 2008 +0300
17771 tsec: fix link detection for the RTL8211B PHY
17773 RTL8211B sets link state register after autonegotiation complete,
17774 so with bootdelay=0 RTL8211B will report lack of the link.
17776 To fix this, we should wait for aneg to complete, even if the
17777 link is currently down.
17779 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17780 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17782 commit 7fa9cbb00dc83fcf175042b6f20c2c9bce9a15f4
17783 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17784 Date: Mon Mar 24 20:47:09 2008 +0300
17786 mpc83xx: add "fsl,soc" and "fsl,immr" compatible fixups
17788 device_type = "soc" is being deprecated, newer device trees will use
17789 "fsl,soc" and/or "fsl,immr" for the soc nodes.
17791 This patch also adds clock-frequency property for soc nodes (the same
17792 value as bus-frequency).
17794 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17796 commit 507e2d79c91441a0bb2cd3d0c31c8bfe3f8cec07
17797 Author: Joe D'Abbraccio <ljd015@freescale.com>
17798 Date: Mon Mar 24 13:00:59 2008 -0400
17800 Modified the DDR SDRAM clock control register to delay MCK/MCK_B 3/4 clock
17802 With the original value of 1/2 clock cycle delay, the system ran relatively
17803 stable except when we run benchmarks that are intensive users of memory.
17804 When I run samba connected disk with a HDBENCH test, the system locks-up
17805 or reboots sporadically.
17807 Signed-off by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
17809 commit a7ba32d480a86db5db8dcd8ca66b21b4cadda923
17810 Author: Scott Wood <scottwood@freescale.com>
17811 Date: Mon Mar 24 12:44:13 2008 -0500
17813 mpc83xx: Set PCI I/O bus-address base to zero.
17815 The device trees for these boards describe PCI I/O as starting from
17816 address zero from the device's perspective.
17818 Placing I/O elsewhere may cause problems with certain PCI boards, and may
17819 cause problems with Linux.
17821 Signed-off-by: Scott Wood <scottwood@freescale.com>
17823 commit f700e7df7fecf2d3765ae568ce77ce788cde4f3e
17824 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17825 Date: Mon Mar 24 20:47:05 2008 +0300
17827 mpc83xx: MPC8360E-RDK: use 33.3(3)MHz CLKIN/SYS_CLK
17829 At least on the "33MHz Pilot" board crystal is actually 33.3MHz.
17830 This patch fixes "system time drifting" problem.
17832 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17834 commit 3a0cfdd576dc9b16d1468d37339182607c697fb7
17835 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17836 Date: Mon Mar 24 20:47:02 2008 +0300
17838 mpc83xx: MPC8360E-RDK: define CONFIG_OF_STDOUT_VIA_ALIAS
17840 This is needed to update /choosen/linux,stdout-path properly.
17842 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17844 commit 3419eb62f088d7a22f1d2a3cebf76b77e408b5b9
17845 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17846 Date: Mon Mar 24 20:47:00 2008 +0300
17848 mpc83xx: MPC8360E-RDK: add dhcp command
17850 Plus modify environment to use it and remove bootfile env variable,
17851 it is internal and CONFIG_BOOTFILE is used for these purposes.
17853 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17855 commit d892b2dbb4087a26778bfd42470c3ea7d0e2b6aa
17856 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17857 Date: Mon Mar 24 20:46:57 2008 +0300
17859 mpc83xx: MPC8360E-RDK: rework ddr setup, enable ecc
17861 Current DDR setup easily causes memory corruption, this patch fixes it.
17863 Also fix TIMING_CFG0_MRS_CYC definition.
17865 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17867 commit d47d49cc37a38f2719a3e1b9bbe08ac810cf2d9a
17868 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17869 Date: Mon Mar 24 20:46:53 2008 +0300
17871 mpc83xx: MPC8360E-RDK: configure pario pins for AD7843 and FHCI
17873 This patch adds qe pario pins configuration for AD7843 ADC/Touchscreen
17874 controller and FHCI (QE USB).
17876 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17878 commit 7ad959490962e6842648d87d4bd795ea6cdcce67
17879 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17880 Date: Mon Mar 24 20:46:51 2008 +0300
17882 mpc83xx: MPC8360E-RDK: add support for NAND
17884 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17886 commit 9a3e832aeb491861d029991241572ebdf4b5b61b
17887 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17888 Date: Mon Mar 24 20:46:46 2008 +0300
17890 mpc83xx: MPC8360E-RDK: use RGMII_RXID interface mode
17892 This is needed for BCM PHYs to work on this board.
17894 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17896 commit 300615dc5d9b0a2022fbc6af0c13159e33fd752e
17897 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17898 Date: Mon Mar 24 20:46:34 2008 +0300
17900 uec: add support for Broadcom BCM5481 Gigabit PHY
17902 This patch adds basic support for Broadcom BCM5481 PHY.
17904 RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is
17905 Peter Barada <peterb@logicpd.com>.
17907 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17909 commit 6a600c3a1876bc203445df4f0fd6b12648259666
17910 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17911 Date: Mon Mar 24 20:46:28 2008 +0300
17913 uec: add support for RGMII_RXID interface mode
17915 PHY drivers will use it to setup software delay between RXD and RXC
17918 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17920 commit 91cdaa3a9d7562b869d96774e9c9ddf142c0848d
17921 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17922 Date: Mon Mar 24 20:46:24 2008 +0300
17924 uec: add support for gbit mii status readings
17926 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17928 commit aabce7fb505ffe55ebf3bf4dcafdae97a581558d
17929 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17930 Date: Mon Mar 24 17:40:47 2008 +0300
17932 83xx: define CONFIG_OF_STDOUT_VIA_ALIAS for the MPC837XERDB boards
17934 This is primarily for the early console support.
17936 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17938 commit 2bd7460e9283ec98565189b3cdbcfb2bcdcdd635
17939 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17940 Date: Mon Mar 24 17:40:43 2008 +0300
17942 83xx: initialize serdes for MPC837XRDB boards
17944 On the MPC8377ERDB: 2 SATA and 2 PCI-E.
17945 On the MPC8378ERDB: 2 PCI-E
17946 On the MPC8379ERDB: 4 SATA
17948 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17950 commit 453316a2a19642d8afcbca7452e40a6b44a197b1
17951 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17952 Date: Mon Mar 24 17:40:32 2008 +0300
17954 83xx: serdes setup routines
17956 This patch adds few routines to configure serdes on 837x targets.
17958 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17960 commit a796cdf9c377cb4e5d61d1079a296608f8fbd903
17961 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17962 Date: Mon Mar 24 17:40:27 2008 +0300
17964 83xx: split COBJS onto separate lines
17966 ..plus get rid of some #ifdefs in the .c files.
17968 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17970 commit 46a3aeea73c13ab04ebf7a8739afb87ac5da94a3
17971 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
17972 Date: Mon Mar 24 17:40:23 2008 +0300
17974 83xx: nand support for MPC837XRDB boards
17976 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
17978 commit 82e45a204190593e8613145a928f998fb8c909c4
17979 Author: Jerry Van Baren <gvb.uboot@gmail.com>
17980 Date: Tue Mar 18 21:44:41 2008 -0400
17982 Enable CONFIG_FLASH_SHOW_PROGRESS on the MPC8360EMDS.
17984 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
17985 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
17987 commit 0fa7a1b4719e325fce332689fb8754ec166191ff
17988 Author: Michael Barkowski <michael.barkowski@freescale.com>
17989 Date: Thu Mar 20 13:15:39 2008 -0400
17991 mpc8323erdb: remove RTC and add EEPROM
17993 There's no on-board RTC on the MPC8323ERDB, but there is an EEPROM.
17995 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
17996 Acked-by: Kim Phillips <kim.phillips@freescale.com>
17998 commit 5bbeea86eb6afb872374cd23217cb3c1018443ed
17999 Author: Michael Barkowski <michael.barkowski@freescale.com>
18000 Date: Thu Mar 20 13:15:34 2008 -0400
18002 mpc8323erdb: Improve the system performance
18004 The following changes are based on kernel UCC ethernet performance:
18006 1. Make the CSB bus pipeline depth as 4, and enable the repeat mode
18007 2. Optimize transactions between QE and CSB. Added CFG_SPCR_OPT
18008 switch to enable this setting.
18010 The following changes are based on the App Note AN3369 and
18011 verified to improve memory latency using LMbench:
18013 3. CS0_CONFIG[AP_n_EN] is changed from 1 to 0
18014 4. CS0_CONFIG[ODT_WR_CONFIG] set to 1. Was a reserved setting
18016 5. TIMING_CFG_1[WRREC] is changed from 3clks to 2clks (based on
18017 Twr=15ns, and this was already the setting in DDR_MODE)
18018 6. TIMING_CFG_1[PRETOACT] is changed from 3clks to 2clks. (based on
18020 7. TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 6clks. (based on
18022 8. TIMING_CFG_1[ACTTORW] is changed from 3clks to 2clks. (based on
18024 9. TIMING_CFG_1[REFREC] changed from 21 clks to 11clks. (based on
18026 10. TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 7clks. (based
18028 11. TIMING_CFG_2[ADD_LAT] and DDR_MODE[AL] changed from 0 to 1 (based
18031 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
18032 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18034 commit fc549c871f43933396a5b3e21d897023d4b31b8d
18035 Author: Michael Barkowski <michael.barkowski@freescale.com>
18036 Date: Thu Mar 20 13:15:28 2008 -0400
18038 mpc8323erdb: use readable DDR config macros
18040 Use available shift/mask macros to define DDR configuration.
18042 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
18043 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18045 commit 89c7784ed90ba50301eec521144f95111e472906
18046 Author: Timur Tabi <timur@freescale.com>
18047 Date: Fri Feb 8 13:15:55 2008 -0600
18049 83xx: Add Vitesse VSC7385 firmware uploading
18051 Update the MPC8349E-mITX, MPC8313E-RDB, and MPC837XE-RDB board files to upload
18052 the Vitesse VSC7385 firmware. Changed CONFIG_VSC7385 to CONFIG_VSC7385_ENET.
18053 Cleaned up the board header files to make selecting the VSC7385 easier to
18056 Signed-off-by: Timur Tabi <timur@freescale.com>
18057 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
18059 commit b55d98c6d5b8694e560a0e727b14cb6921d7cfcc
18060 Author: Timur Tabi <timur@freescale.com>
18061 Date: Fri Feb 8 13:15:54 2008 -0600
18063 NET: Add Vitesse VSC7385 firmware uploading
18065 The Vitesse VSC7385 is a 5-port switch found on the Freescale MPC8349E-mITX
18066 and other boards. A small firwmare must be uploaded to its on-board memory
18067 before it can be enabled. This patch adds the code which uploads firmware
18068 (but not the firmware itself).
18070 Previously, this feature was provided by a U-Boot application that was
18071 made available only on Freescale BSPs. The VSC7385 firmware must still
18072 be obtained separately, but at least there is no longer a need for a separate
18075 Signed-off-by: Timur Tabi <timur@freescale.com>
18076 Acked-by: Ben Warren <biggerbadderben@gmail.com>
18078 commit aa6f6d171a1f9f46ee4f03ad6acb97a6bfb71855
18079 Author: Wolfgang Denk <wd@denx.de>
18080 Date: Wed Mar 26 00:52:10 2008 +0100
18082 Coding Style cleanyp; update CHANGELOG
18084 Signed-off-by: Wolfgang Denk <wd@denx.de>
18086 commit 43ddd9c820fec44816188f53346b464e20b3142d
18087 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18088 Date: Sat Mar 22 14:23:49 2008 -0400
18090 Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T
18092 These defines embedded the u-boot env variables and/or the bd_t structure
18093 in the fdt blob. The conclusion of discussion on the u-boot email list
18094 was that embedding these in the fdt blob is not useful: there are better
18095 ways of passing the data (in fact, the fdt blob itself replaces the
18098 The only board that enables these is the stxxtc and they don't appear
18099 to be used by linux.
18101 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18102 Acked-by: Kim Phillips <kim.phillips@freescale.com>
18104 commit 22ed2285743359fd1fe73e411dff914b2256e68f
18105 Author: Stefan Roese <sr@denx.de>
18106 Date: Mon Mar 17 10:49:25 2008 +0100
18108 rtc: Remove 2nd reference to max6900.o in drivers/rtc/Makefile
18110 Signed-off-by: Stefan Roese <sr@denx.de>
18112 commit 1bb707c39a0833e91d9f797dd862aaaaf4af264d
18113 Author: Kyungmin Park <kmpark@infradead.org>
18114 Date: Mon Mar 17 08:54:06 2008 +0900
18116 Add Flex-OneNAND booting support
18118 Flex-OneNAND is a monolithic integrated circuit with a NAND Flash array
18119 using a NOR Flash interface. This on-chip integration enables system designers
18120 to reduce external system logic and use high-density NAND Flash
18121 in applications that would otherwise have to use more NOR components.
18123 Flex-OneNAND enables users to configure to partition it into SLC and MLC areas
18124 in more flexible way. While MLC area of Flex-OneNAND can be used to store data
18125 that require low reliability and high density, SLC area of Flex-OneNAND
18126 to store data that need high reliability and high performance. Flex-OneNAND
18127 can let users take advantage of storing these two different types of data
18128 into one chip, which is making Flex-OneNAND more cost- and space-effective.
18130 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
18132 commit c512389cc4a10253249271ff6c887c6dab1f0db2
18133 Author: André Schwarz <andre.schwarz@matrix-vision.de>
18134 Date: Thu Mar 13 13:50:52 2008 +0100
18136 MPC5200: support setup without FEC
18138 Include FEC specific nodes in ft_cpu_setup only if CONFIG_MPC5xxx_FEC is
18139 defined. Systems without FEC, i.e. no FEC node in DTB, should be possible.
18141 Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
18142 Acked-by: Grant Likely <grant.likely@secretlab.ca>
18144 commit aa3511e422946041ef626f80a05ae5e8bfc700e6
18145 Author: Jon Loeliger <jdl@freescale.com>
18146 Date: Wed Mar 5 18:05:46 2008 -0600
18148 FSL: Move board/mpc8266ads under board/freescale
18150 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18152 commit 7f1d846e5c5754449c286587d099d85246062772
18153 Author: Jon Loeliger <jdl@freescale.com>
18154 Date: Wed Mar 5 18:05:47 2008 -0600
18156 FSL: Move board/mpc7448hpc2 under board/freescale
18158 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18160 commit b7e24d283e34727c2a6cdfdac2e09a426c579b73
18161 Author: Jon Loeliger <jdl@freescale.com>
18162 Date: Wed Mar 5 18:05:45 2008 -0600
18164 FSL: Move board/mpc8260ads under board/freescale
18166 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18168 commit 6a8a5dc4759867c45aa95580deb8bf26669a5d97
18169 Author: goda.yusuke <goda.yusuke@renesas.com>
18170 Date: Wed Mar 5 17:08:33 2008 +0900
18172 net: Add support AX88796L ethernet device
18174 AX88796L is device of NE2000 compatible.
18175 This patch support AX88796L ethernet device.
18177 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
18178 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18180 commit e0a6140dd381e1eed1ada2291166ef2616d8822b
18181 Author: Wolfgang Denk <wd@denx.de>
18182 Date: Tue Mar 25 22:50:41 2008 +0100
18184 ne2000 driver: change #ifdef to Makefile conditional compilation
18186 Signed-off-by: Wolfgang Denk <wd@denx.de>
18188 commit e710185aae90c64d39c2d453e40e58ceefe4f250
18189 Author: goda.yusuke <goda.yusuke@renesas.com>
18190 Date: Wed Mar 5 17:08:20 2008 +0900
18192 net: Divided code of NE2000 ethernet driver
18194 There are more devices of the NE2000 base.
18195 A present code is difficult for us to support more devices.
18196 To support more NE2000 clone devices, separated the function.
18198 Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
18199 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18201 commit 395bce4f59a507a60a475f7ee46bed47de9482df
18202 Author: Mike Frysinger <vapier@gentoo.org>
18203 Date: Sun Feb 24 23:58:13 2008 -0500
18205 net/Blackfin: move on-chip MAC driver into drivers/net/
18207 The Blackfin on-chip MAC driver was being managed in the BF537-STAMP board
18208 directory, but it is not board specific, so relocate it to the drivers dir
18209 so that other Blackfin ports can utilize it.
18211 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18213 commit 8a30b4700942f37495d2e67f5998cdffb6e3ba8a
18214 Author: Mike Frysinger <vapier@gentoo.org>
18215 Date: Sun Feb 24 23:52:35 2008 -0500
18217 smc91111: use SSYNC() rather than asm(ssync) for Blackfin
18219 Since the "ssync" instruction may have hardware anomalies associated with
18220 it, have the smc91111 driver use the SSYNC macro rather than invoking it
18221 directly. We workaround all the anomalies via this macro.
18223 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18225 commit 77ff7b7444ceb8022b46114f3d0b6d18e2fd1138
18226 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18227 Date: Sun Feb 17 22:57:47 2008 +0000
18229 8xx: Update OF support on 8xx
18231 This patch does some shifting around of OF support on 8xx.
18233 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18235 commit 9c666a7db0b2285a270c68810889ce7d5dba304b
18236 Author: Kumar Gala <galak@kernel.crashing.org>
18237 Date: Fri Feb 15 15:16:18 2008 -0600
18239 ppc: Allow boards to specify how much memory they can map
18241 For historical reasons we limited the stack to 256M because some boards
18242 could only map that much via BATS. However newer boards are capable of
18243 mapping more memory (for example 85xx is capble of doing up to 2G).
18245 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18247 commit a6f5f317cd074bbbfa2aab4fca05904c811c19fb
18248 Author: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18249 Date: Fri Feb 15 01:05:58 2008 +0000
18251 8xx : Add OF support to Adder875 board port - resubmit
18253 Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie>
18255 commit d058698fd2d9f769ff38ac53c8708b3fdd314f2d
18256 Author: Kumar Gala <galak@kernel.crashing.org>
18257 Date: Thu Feb 14 20:44:42 2008 -0600
18259 Add setexpr command
18261 Add a simple expr style command that will set an env variable as the result
18262 of the command. This allows us to do simple math in shell. The following
18263 operations are supported: &, |, ^, +, -, *, /.
18265 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18267 commit 3f105faa64b9826e088711fdfcaa70cb1230397a
18268 Author: Jon Loeliger <jdl@freescale.com>
18269 Date: Wed Mar 5 17:27:48 2008 -0600
18271 FSL: Move board/mpc7448hpc2 under board/freescale
18273 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18275 commit 449c703374a8868453425e15da7e2f76221b72e4
18276 Author: Jon Loeliger <jdl@freescale.com>
18277 Date: Wed Mar 5 17:21:43 2008 -0600
18279 FSL: Move board/mpc8266ads under board/freescale
18281 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18283 commit 5863577989ad689427bb750107e9a75f1c1645d2
18284 Author: Jon Loeliger <jdl@freescale.com>
18285 Date: Wed Mar 5 16:41:41 2008 -0600
18287 FSL: Move board/mpc8260ads under board/freescale
18289 Signed-off-by: Jon Loeliger <jdl@freescale.com>
18291 commit 8a773983957ee6c4aa344469b742f29c7d26afbd
18292 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18293 Date: Tue Mar 25 21:30:08 2008 +0900
18295 [MIPS] Move gth2_config from ARM section to MIPS
18297 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18299 commit 373b16fc0c5ae34d28b9027f809ae3cbf45cdd15
18300 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18301 Date: Tue Mar 25 21:30:07 2008 +0900
18303 [MIPS] Extend MIPS_MAX_CACHE_SIZE upto 64kB
18305 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18307 commit d98e348e2ed5aab8f7a6471ff628ab0688b8a459
18308 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18309 Date: Tue Mar 25 21:30:07 2008 +0900
18311 [MIPS] Fix dcache_status()
18313 You can't judge UNCACHED by Config.K0 LSB.
18315 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18317 commit b0c66af53ec9385ac2d1cc2e5d7d1ecdc81caf34
18318 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18319 Date: Tue Mar 25 21:30:07 2008 +0900
18321 [MIPS] Introduce _machine_restart
18323 Handles machine specific functions by using weak functions.
18325 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18327 commit decaba6f5cf386d569ac3997bebb871b966c6b18
18328 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18329 Date: Tue Mar 25 21:30:07 2008 +0900
18331 [MIPS] Cleanup CP0 Status initialization
18333 Add setup_c0_status from Linux. For the moment we disable interrupts, set
18334 CU0, mark the kernel mode, and clear ERL and EXL. This is good enough for
18335 reset-time configuration and will work well across most processors.
18337 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18339 commit d43d43ef2845af309c25a64bb9c2c5fb3261bc23
18340 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18341 Date: Tue Mar 25 21:30:07 2008 +0900
18343 [MIPS] Initialize CP0 Cause before setting up CP0 Status register
18345 Without this change, we'll be suffering from deffered WATCH exception
18346 once Status.EXL is cleared. Make sure Cause.WP is cleared.
18348 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18350 commit 26138623230ca2bad3c78e05a65527ea70c8b688
18351 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18352 Date: Tue Mar 25 21:30:07 2008 +0900
18354 [MIPS] INCA-IP: Move watchdog init code from start.S to lowlevel_init()
18356 Move things to appropriate place.
18358 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18360 commit ccf8f824ef67df028dedb29f8ea5d71a5a88d895
18361 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18362 Date: Tue Mar 25 21:30:06 2008 +0900
18364 [MIPS] Implement flush_cache()
18366 We do Hit_Writeback_Inv_D and Hit_Invalidate_I. You might think that you
18367 don't need to do Hit_Invalidate_I, but flush_cache() needs it since this
18368 function is used not only in U-Boot specfic programs but also at loading
18371 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18373 commit 2e0e5271aac917812a76c72030a2b2c6f1d3387d
18374 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18375 Date: Tue Mar 25 21:30:06 2008 +0900
18377 [MIPS] Fix I-/D-cache initialization loops
18379 Currently we do 1) Index_Store_Tag_I, 2) Fill and 3) Index_Store_Tag_I
18380 again per a loop for I-cache initialization. But according to 'See MIPS
18381 Run', we're encouraged to use three separate loops rather than combining
18382 them *for both I- and D-cache*. This patch tries to fix this.
18384 In accordance with fixing above, mips_init_[id]cache are separated from
18385 mips_cache_reset(), and rewrite cache loops are completely rewritten with
18388 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18390 commit 1898840797c7f50799377bd5b285a8a93a82c419
18391 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18392 Date: Tue Mar 25 21:30:06 2008 +0900
18394 [MIPS] Replace memory clearance code with f_fill64
18396 This routine fills memory with zero by 64 bytes, and is 64-bit capable.
18398 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18400 commit 2f5d414ccb4024dd0992ff6b22561732dbc73590
18401 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18402 Date: Tue Mar 25 21:30:06 2008 +0900
18404 [MIPS] cpu/mips/cache.S: Introduce NESTED/LEAF/END macros
18406 This patch replaces the current function definitions with NESTED, LEAF
18407 and END macro. They specify some more additional information about the
18408 function; an alignment of symbol, type of symbol, stack frame usage, etc.
18409 These information explicitly tells the assembler and the debugger about
18410 the types of code we want to generate.
18412 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18414 commit 282223a607c611425fa33f5428f8eae6636972bb
18415 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18416 Date: Tue Mar 25 11:43:17 2008 +0900
18418 [MIPS] asm headers' updates
18420 Make some asm headers adjusted to the latest Linux kernel.
18422 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18424 commit e1390801a3c1a2b6d12fa90be368efc19f5b9bfd
18425 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18426 Date: Tue Mar 25 11:39:29 2008 +0900
18428 [MIPS] Request for the 'mips_cache_lock()' removal
18430 The initial intension of having mips_cache_lock() was to use the cache
18431 as memory for temporary stack use so that a C environment can be set up
18432 as early as possible.
18434 But now mips_cache_lock() follow lowlevel_init(). We've already have the
18435 real memory initilaized at this point, therefore we could/should use it.
18436 No reason to lock at all.
18440 Cache locking is not consistent across MIPS implementaions. Some imple-
18441 mentations don't support locking at all. The style of locking varies -
18442 some support per line locking, others per way, etc. Some parts use bits
18443 in status registers instead of cache ops. Current mips_cache_lock() is
18444 not necessarily general-purpose.
18446 And this is worthy of special mention; once U-Boot/MIPS locks the lines,
18447 they are never get unlocked, so the code relies on whatever gets loaded
18448 after U-Boot to re-initialize the cache and clear the locks. We're sup-
18449 posed to have CFG_INIT_RAM_LOCK and unlock_ram_in_cache() implemented,
18450 but leave the situation as it is for a long time.
18452 For these reasons, I proposed the removal of mips_cache_lock() from the
18453 global start-up code.
18455 This patch adds CFG_INIT_RAM_LOCK_MIPS to make existing users aware that
18456 *things have changed*. If he wants the same behavior as before, he needs
18457 to have CFG_INIT_RAM_LOCK_MIPS in his config file.
18459 If we don't have any regression report through several releases, then
18460 we'll remove codes entirely.
18462 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
18463 Acked-by: Andrew Dyer <amdyer@gmail.com>
18465 commit 0d48926c87ec96f974a6ac4034f4a2f2eab3255f
18466 Author: Yuri Tikhonov <yur@emcraft.com>
18467 Date: Mon Mar 24 11:30:54 2008 +0100
18469 lwmon5 SYSMON POST: fix backlight control
18471 If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
18472 run on the board, then the SYSMON POST controls the display backlight
18473 (doesn't switch backlight ON if POST FAILED, and does switch the
18474 backlight ON if PASSED).
18476 If not, then the video driver controls the display backlight (just
18477 switch ON the backlight upon initialization).
18479 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18481 commit ff2bdfb2c1e073f65c065011f1e18d0a130bd3d8
18482 Author: Yuri Tikhonov <yur@emcraft.com>
18483 Date: Mon Mar 24 11:29:14 2008 +0100
18485 lwmon5 SYSMON POST: fix handling of negative temperatures
18487 Fix errors in the LWMON5 Sysmon POST for negative temperatures.
18489 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18491 commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
18492 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18493 Date: Fri Mar 7 16:04:25 2008 +0900
18495 pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
18497 In current source code, when the device number of PCI is 0, process PCI
18498 bridge without fail. However, when the device number is 0, it is not PCI
18499 always bridge. There are times when device of PCI allocates.
18501 When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
18504 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
18505 Acked-by: Stefan Roese <sr@denx.de>
18507 commit 86aea3eaefa248ffb9328e2b50c64720489cdbeb
18508 Author: Yuri Tikhonov <yur@emcraft.com>
18509 Date: Fri Mar 21 09:18:40 2008 +0100
18511 LWMON5: fix dsPIC POST
18513 Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
18515 Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
18517 commit 388b82fddc7c05596f3f615f190da0448227dc82
18518 Author: Bartlomiej Sieka <tur@semihalf.com>
18519 Date: Thu Mar 20 23:23:13 2008 +0100
18521 [new uImage] Enable new uImage support for the pcs440ep board.
18523 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18525 commit 95f4ec2b9c910c7261e6f060ea530d58b039692d
18526 Author: Bartlomiej Sieka <tur@semihalf.com>
18527 Date: Thu Mar 20 23:23:13 2008 +0100
18529 [new uImage] Do not compile new uImage format support by default
18531 Disable default building of new uImage format support in preparation
18532 for merge with the master. Support for new format can be enabled on
18533 a per-board basis, by defining the following in the board's config file:
18535 #define CONFIG_FIT 1
18536 #define CONFIG_OF_LIBFDT 1
18538 This can be optionally defined to give more verbose output:
18540 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
18542 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18544 commit dafaede8a46c7159310239e036c93e31c6374487
18545 Author: Bartlomiej Sieka <tur@semihalf.com>
18546 Date: Thu Mar 20 23:20:31 2008 +0100
18548 [new uImage] Disable debuging output in preparation for merge with master
18550 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18552 commit fbe7a155027beacebaee9b32e1ada781fe924bca
18553 Author: Bartlomiej Sieka <tur@semihalf.com>
18554 Date: Thu Mar 20 19:38:45 2008 +0100
18556 [new uImage] Compilation and new uImage handling fixes for imxtract
18558 Fix imxtract command not being compiled-in despite CONFIG_CMD_XIMG being in
18559 include/config_cmd_default.h. Fix few warnings and handling of new format
18562 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18564 commit 36cc8cbb3379d5166f882641123521735c469f92
18565 Author: Bartlomiej Sieka <tur@semihalf.com>
18566 Date: Thu Mar 20 23:10:19 2008 +0100
18568 [new uImage] Fix autoscr command used with new uImage format
18570 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18572 commit 43142e817f0597be412e7cbe19413f5532eafa5d
18573 Author: Bartlomiej Sieka <tur@semihalf.com>
18574 Date: Thu Mar 20 23:10:19 2008 +0100
18576 [new uImage] Fix *.its files location in documentation
18578 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18580 commit 81a0ac62ea29f8252d0a714709d0ecfdbba2a15e
18581 Author: Wolfgang Denk <wd@denx.de>
18582 Date: Thu Mar 20 22:01:38 2008 +0100
18584 lwmon5 POST: remove unreachable code
18586 plus some coding style cleanup
18588 Signed-off-by: Wolfgang Denk <wd@denx.de>
18590 commit b73a19e1609d0f705cbab8014ca17aefe89e4c76
18591 Author: Yuri Tikhonov <yur@emcraft.com>
18592 Date: Thu Mar 20 17:56:04 2008 +0300
18594 LWMON5: POST RTC fix
18596 Modify the RTC API to provide one a status for the time reported by
18597 the rtc_get() function:
18598 0 - a reliable time is guaranteed,
18599 < 0 - a reliable time isn't guaranteed (power fault, clock issues,
18602 The RTC chip drivers are responsible for providing this info if the
18603 corresponding chip supports such functionality. If not - always
18604 report that the time is reliable.
18606 The POST RTC test was modified to detect the RTC faults utilizing
18607 this new rtc_get() feature.
18609 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18611 commit a5cc5555ccee596908a7d8cf22a104f6b993bfd5
18612 Author: Martin Krause <martin.krause@tqs.de>
18613 Date: Wed Mar 19 14:25:14 2008 +0100
18615 TQM5200B: update MTD partition layout
18617 - insert partition for dtb blob to TQM5200B MTD layout
18618 - set env variables dependent on the configured board
18619 (TQM5200 or TQM5200B)
18621 Signed-off-by: Martin Krause <martin.krause@tqs.de>
18623 commit f0105727d132f56a21fa3ed8b162309cca6cac44
18624 Author: Stefan Roese <sr@denx.de>
18625 Date: Wed Mar 19 07:09:26 2008 +0100
18627 CFI: Small cleanup for FLASH_SHOW_PROGRESS
18629 With this patch we don't need that many #ifdef's in the code. It moves
18630 the subtraction into the macro and defines a NOP-macro when
18631 CONFIG_FLASH_SHOW_PROGRESS is not defined.
18633 Signed-off-by: Stefan Roese <sr@denx.de>
18634 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
18636 commit 9a042e9ca512beaaa2cb450274313fc477141241
18637 Author: Jerry Van Baren <gvb.uboot@gmail.com>
18638 Date: Sat Mar 8 13:48:01 2008 -0500
18640 Flash programming progress countdown.
18642 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
18644 commit 5e339fd9ed539a7d7fec59cfc88f0857ab26a53f
18645 Author: Bartlomiej Sieka <tur@semihalf.com>
18646 Date: Wed Mar 19 10:00:06 2008 +0100
18648 [new uImage] Fix style issue spotted by Wolfgang Denk <wd@denx.org>
18650 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
18652 commit 11abe45c48ec3485a6c1a5168ce8d79c3288adc1
18653 Author: David Gibson <david@gibson.dropbear.id.au>
18654 Date: Mon Feb 18 18:09:04 2008 +1100
18656 libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
18658 Since fdt_node_offset_by_compatible() was converted to the new
18659 fdt_next_node() iterator, a chunk of initialization code became
18660 redundant, but was not removed by oversight. This patch cleans it up.
18662 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18664 commit d0ccb9b140b472039732de102fc14597eedb14df
18665 Author: David Gibson <david@gibson.dropbear.id.au>
18666 Date: Mon Feb 18 18:06:31 2008 +1100
18668 libfdt: Trivial cleanup for CHECK_HEADER)
18670 Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
18671 However, there are a handful of functions (fdt_move, rw_check_header,
18672 fdt_open_into) from other files which could also use it (currently
18673 they open-code something more-or-less identical). Therefore, this
18674 patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
18677 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18679 commit fe30a354cdbb808b5f15366a935b151a4ccee74f
18680 Author: Kumar Gala <galak@kernel.crashing.org>
18681 Date: Wed Feb 20 14:32:36 2008 -0600
18683 Fix fdt boardsetup command parsing
18685 The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
18687 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18689 commit 804887e6001e2f00bea11431bf34d6d472512cda
18690 Author: Kumar Gala <galak@kernel.crashing.org>
18691 Date: Fri Feb 15 03:34:36 2008 -0600
18693 Add sub-commands to fdt
18695 fdt header - Display header info
18696 fdt bootcpu <id> - Set boot cpuid
18697 fdt memory <addr> <size> - Add/Update memory node
18698 fdt rsvmem print - Show current mem reserves
18699 fdt rsvmem add <addr> <size> - Add a mem reserve
18700 fdt rsvmem delete <index> - Delete a mem reserves
18702 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
18704 commit f84d65f9b085ffbed464d1d58e8aaa8f5a2efc07
18705 Author: David Gibson <david@gibson.dropbear.id.au>
18706 Date: Thu Feb 14 16:50:34 2008 +1100
18708 libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
18710 fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
18711 node which has NOP tags interspersed with its properties. In this
18712 case fdt_add_subnode_namelen() will put the new subnode before the
18713 first NOP tag, even if there are properties after it, which will
18714 result in an invalid blob.
18716 This patch fixes the bug, and adds a testcase for it.
18718 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18720 commit ae0b5908de3b9855f8931bc9b32c9fc4962df5a9
18721 Author: David Gibson <david@gibson.dropbear.id.au>
18722 Date: Tue Feb 12 11:58:31 2008 +1100
18724 libfdt: Add and use a node iteration helper function.
18726 This patch adds an fdt_next_node() function which can be used to
18727 iterate through nodes of the tree while keeping track of depth. This
18728 function is used to simplify the iteration code in a lot of other
18729 functions, and is also exported for use by library users.
18731 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18733 commit 9eaeb07a7185d852c7aa10735ecd4e9edf24fb5d
18734 Author: David Gibson <david@gibson.dropbear.id.au>
18735 Date: Fri Jan 11 14:55:05 2008 +1100
18737 libfdt: Add fdt_set_name() function
18739 This patch adds an fdt_set_name() function to libfdt, mirroring
18740 fdt_get_name(). This is a r/w function which alters the name of a
18741 given device tree node.
18743 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
18745 commit 23e20aa6488e6c0622496549861bfdc74108debe
18746 Author: Yuri Tikhonov <yur@pollux.denx.de>
18747 Date: Tue Mar 18 13:33:30 2008 +0100
18749 lwmon5: Fix register test logic to match the specific GDC h/w.
18751 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18752 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18754 commit 46bc0a938779aa1d664b847d36b08aa00f22e539
18755 Author: Yuri Tikhonov <yur@pollux.denx.de>
18756 Date: Tue Mar 18 13:27:57 2008 +0100
18758 Fix backlight in the lwmon5 POST.
18760 Backlight was switched on even when temperature was too low.
18762 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18763 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18765 commit 3d61018643a2cd38c145aa6dde53f3f5f1a0e9cf
18766 Author: Yuri Tikhonov <yur@pollux.denx.de>
18767 Date: Wed Feb 6 18:48:36 2008 +0100
18769 The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
18771 To enable this, alternative, configuration the U-Boot board configuration
18772 file for lwmon5 includes the definitions of alternative addresses for header
18773 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
18775 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
18776 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
18777 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
18779 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18781 commit 0f009f781b5b88f25769e154ea4d42db13baf0c6
18782 Author: Yuri Tikhonov <yur@pollux.denx.de>
18783 Date: Mon Feb 4 17:11:53 2008 +0100
18785 Add support for the lwmon5 board reset via GPIO58.
18787 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18788 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18790 commit f694e32f93565ec1fa8d0226c584d6b89e931ed9
18791 Author: Yuri Tikhonov <yur@pollux.denx.de>
18792 Date: Mon Feb 4 17:09:55 2008 +0100
18794 Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
18796 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18797 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18799 commit b428f6a8c65c5303e5f96db8d24f2f699d94a98c
18800 Author: Yuri Tikhonov <yur@pollux.denx.de>
18801 Date: Mon Feb 4 14:11:03 2008 +0100
18803 The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
18805 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18806 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18808 commit 8f15d4addd49c956412e1e3bfc764a0c8b1f3184
18809 Author: Yuri Tikhonov <yur@pollux.denx.de>
18810 Date: Mon Feb 4 14:10:42 2008 +0100
18812 The patch adds new POST tests for the Lwmon5 board. These are:
18814 * External Watchdog test;
18820 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18821 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18823 commit c2ed33efbfff5767bca236828e021c55fd547b6c
18824 Author: Yuri Tikhonov <yur@pollux.denx.de>
18825 Date: Mon Feb 4 14:10:01 2008 +0100
18827 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
18829 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18831 commit 3a5d1e7f1309998791702b2a559e3126781746b9
18832 Author: Yuri Tikhonov <yur@pollux.denx.de>
18833 Date: Tue Mar 18 13:33:30 2008 +0100
18835 lwmon5: Fix register test logic to match the specific GDC h/w.
18837 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18838 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18840 commit 0f855a1f056a8c22116a2103a3900cbfb669df0b
18841 Author: Yuri Tikhonov <yur@pollux.denx.de>
18842 Date: Tue Mar 18 13:27:57 2008 +0100
18844 Fix backlight in the lwmon5 POST.
18846 Backlight was switcehd on even when temperature was too low.
18848 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18849 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18851 commit 2d991958b1e420fbfe17b128bd26ade74be5efcc
18852 Author: Yuri Tikhonov <yur@pollux.denx.de>
18853 Date: Wed Feb 6 18:48:36 2008 +0100
18855 The patch introduces the alternative configuration of the log buffer for
18856 the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory),
18857 the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ...,
18858 PPC440EPX_GPT0_COMP5).
18860 To enable this, alternative, configuration the U-Boot board configuration
18861 file for lwmon5 includes the definitions of alternative addresses for header
18862 (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
18864 The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
18865 and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
18866 lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
18868 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18870 commit ff818b21b069f4bc9cb73373cc5a16014be101b7
18871 Author: Yuri Tikhonov <yur@pollux.denx.de>
18872 Date: Mon Feb 4 17:11:53 2008 +0100
18874 Add support for the lwmon5 board reset via GPIO58.
18876 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18877 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18879 commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411
18880 Author: Yuri Tikhonov <yur@pollux.denx.de>
18881 Date: Mon Feb 4 17:09:55 2008 +0100
18883 Some fixes to dspic, fpga, and gdc post tests for lwmon5.
18884 Disable external watch-dog for now.
18886 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18887 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18889 commit e262efe35742c1ad4b0966ff501efc26f34a0aec
18890 Author: Yuri Tikhonov <yur@pollux.denx.de>
18891 Date: Mon Feb 4 14:11:03 2008 +0100
18893 The patch introduces the CRITICAL feature of POST tests. If the test
18894 marked as POST_CRITICAL fails then the alternative, post_critical,
18895 boot-command is used. If this command is not defined then U-Boot
18896 enters into interactive mode.
18898 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18899 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18901 commit 65b20dcefc89618193fa51947968dada91e4c778
18902 Author: Yuri Tikhonov <yur@pollux.denx.de>
18903 Date: Mon Feb 4 14:10:42 2008 +0100
18905 The patch adds new POST tests for the Lwmon5 board.
18908 * External Watchdog test;
18914 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18915 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
18917 commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1
18918 Author: Yuri Tikhonov <yur@pollux.denx.de>
18919 Date: Mon Feb 4 14:10:01 2008 +0100
18921 Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
18923 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
18925 commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2
18926 Author: Wolfgang Denk <wd@denx.de>
18927 Date: Tue Mar 18 17:35:51 2008 +0100
18929 HMI1001: fix compile problem.
18931 Signed-off-by: Wolfgang Denk <wd@denx.de>
18933 commit 1f2a9970109cebf7446e0503b10b71f8673045ee
18934 Author: Mike Frysinger <vapier@gentoo.org>
18935 Date: Mon Feb 18 05:32:30 2008 -0500
18937 Blackfin: BF537-stamp: drop board-specific flash driver for CFI
18939 The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
18940 for the board specific driver at all. Just use the common CFI driver.
18942 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18944 commit 5b22163fef865af2b6bfb6b75f1b7bf443ce170c
18945 Author: Mike Frysinger <vapier@gentoo.org>
18946 Date: Tue Feb 19 00:36:14 2008 -0500
18948 Blackfin: add proper ELF markings to some assembly functions
18950 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18952 commit cf675d3b2b9c3511c1d99bc8f8f38fd2f08bfcaf
18953 Author: Mike Frysinger <vapier@gentoo.org>
18954 Date: Tue Feb 19 00:35:17 2008 -0500
18956 Blackfin: new cplbinfo command for viewing cplb tables
18958 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18960 commit aadb72503cd1602349a5fe53356d5f55ecc1b900
18961 Author: Mike Frysinger <vapier@gentoo.org>
18962 Date: Mon Feb 18 05:37:51 2008 -0500
18964 Blackfin: update MAINTAINERS list
18966 Add maintainer information for the Blackfin boards.
18968 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18970 commit f7ce12cb65a30c6e152eecf26f0304b7d78cf39d
18971 Author: Mike Frysinger <vapier@gentoo.org>
18972 Date: Mon Feb 18 05:26:48 2008 -0500
18974 Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
18976 Stop tying things to the processor that should be tied to other defines and
18977 change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
18978 system to select the -mcpu option.
18980 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18982 commit 86a20fb920bd198105acf7b1191117f566d637ed
18983 Author: Mike Frysinger <vapier@gentoo.org>
18984 Date: Sat Feb 16 07:40:36 2008 -0500
18986 Blackfin: move bootldr command to common code
18988 This moves the Blackfin-common bootldr command out of the BF537-STAMP
18989 specific board directory and into the common directory so that all Blackfin
18990 boards may utilize it.
18992 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
18994 commit decbe029b2a9d3333d02c433389b1c821eea96d7
18995 Author: Heiko Schocher <hs@denx.de>
18996 Date: Fri Mar 14 11:05:20 2008 +0100
18998 mgcoge: update configuration
19000 Fix configuration for mgcoge board
19002 Signed-off-by: Heiko Schocher <hs@denx.de>
19004 commit c136724cda0219c49f1d4b346f00da29b14fdf14
19005 Author: Wolfgang Denk <wd@denx.de>
19006 Date: Sun Mar 16 01:22:59 2008 +0100
19008 drivers/rtc/Makefile: keep list sorted
19010 Signed-off-by: Wolfgang Denk <wd@denx.de>
19012 commit 9536dfcce03e7be4ccbceb47a08d9ba07ada362f
19013 Author: Tor Krill <tor@excito.com>
19014 Date: Sat Mar 15 15:40:26 2008 +0100
19016 Add support for Intersil isl1208 RTC
19018 Signed-off-by: Tor Krill <tor@excito.com>
19020 commit 0210cff3d079d97b2156b13685ee8de368e68a1a
19021 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19022 Date: Sat Mar 15 17:36:41 2008 +0100
19026 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19028 commit 0b8f2a27861a9fd06eb55a34f855ec9c5102aab4
19029 Author: Wolfgang Denk <wd@denx.de>
19030 Date: Sun Mar 16 01:12:58 2008 +0100
19032 Conding style cleanup
19034 Signed-off-by: Wolfgang Denk <wd@denx.de>
19036 commit 41712b4e8c95dff23354bcd620e1f9477160c190
19037 Author: Stefan Roese <sr@denx.de>
19038 Date: Wed Mar 5 12:31:53 2008 +0100
19040 ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
19042 This patch adds USB OHCI support to the Canyonlands board port. It also
19043 enables EXT2 support.
19045 Signed-off-by: Stefan Roese <sr@denx.de>
19047 commit 2596f5b9d353ff3e4387a3325d05740f16958038
19048 Author: Stefan Roese <sr@denx.de>
19049 Date: Wed Mar 5 12:29:32 2008 +0100
19051 usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
19053 This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
19054 way a board just needs to define this new option to enable the "force
19055 NoPowerSwitching mode" instead of adding new CPU/architecture defines
19056 to the USB source itself.
19058 This new option will be used first with the new AMCC 460EX Canyonlands
19059 board port, which will be posted in a few days.
19061 This patch also fixes a small compilation problem when DEBUG is enabled.
19063 Signed-off-by: Stefan Roese <sr@denx.de>
19065 commit 71665ebf88408ff2acb762af47989fd4365b321a
19066 Author: Stefan Roese <sr@denx.de>
19067 Date: Mon Mar 3 17:27:02 2008 +0100
19069 ppc4xx: Add Canyonlands NAND booting support
19071 460EX doesn't support a fixed bootstrap option to boot from 512 byte page
19072 NAND devices. The only bootstrap option for NAND booting is option F for
19073 2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
19074 EEPROM needs to be programmed accordingly.
19076 This patch adds basic NAND booting support for the AMCC Canyonlands aval
19077 board and also adds support to the "bootstrap" command, to enable NAND
19078 booting I2C setting.
19080 Tested with 512 byte page NAND device (32MByte) on Canyonlands.
19082 Signed-off-by: Stefan Roese <sr@denx.de>
19084 commit c813f1f835a7edfdb929f2843b09db72cd5cd2f2
19085 Author: Stefan Roese <sr@denx.de>
19086 Date: Tue Mar 11 16:53:00 2008 +0100
19088 ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
19090 This patch adds support for the AMCC Canyonlands 460EX evaluation
19093 Signed-off-by: Stefan Roese <sr@denx.de>
19095 commit 6983fe21f774a924d3adb263a270bc2f301f2aa2
19096 Author: Stefan Roese <sr@denx.de>
19097 Date: Tue Mar 11 16:52:24 2008 +0100
19099 ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
19101 This patch adds support for the AMCC Canyonlands 460EX evaluation
19104 Signed-off-by: Stefan Roese <sr@denx.de>
19106 commit 8e1a3fe545bbcfceafe183344ebc9f1ad03819c1
19107 Author: Stefan Roese <sr@denx.de>
19108 Date: Tue Mar 11 16:51:17 2008 +0100
19110 ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
19112 This patch adds support for the AMCC Canyonlands 460EX evaluation
19115 Signed-off-by: Stefan Roese <sr@denx.de>
19117 commit 43c60992cdf72496e7eaaa3fbd37ebbe75835f69
19118 Author: Stefan Roese <sr@denx.de>
19119 Date: Tue Mar 11 15:11:43 2008 +0100
19121 ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
19123 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19125 Signed-off-by: Stefan Roese <sr@denx.de>
19127 commit 6f2eb3f3d8ea2dbb224d0da5a12038693bab9945
19128 Author: Stefan Roese <sr@denx.de>
19129 Date: Tue Mar 11 15:11:18 2008 +0100
19131 ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
19133 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19135 Signed-off-by: Stefan Roese <sr@denx.de>
19137 commit 999ecd5aca381984d8ebbeb207ece82a1c275577
19138 Author: Stefan Roese <sr@denx.de>
19139 Date: Tue Mar 11 15:07:10 2008 +0100
19141 ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
19143 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19145 Signed-off-by: Stefan Roese <sr@denx.de>
19147 commit 2801b2d2a9906f206ab9ee8d0b6e746d2b7fe05a
19148 Author: Stefan Roese <sr@denx.de>
19149 Date: Tue Mar 11 15:05:50 2008 +0100
19151 ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
19153 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19155 Signed-off-by: Stefan Roese <sr@denx.de>
19157 commit 8ac41e3e37c3080c6b1d9461d654161cfe2aa492
19158 Author: Stefan Roese <sr@denx.de>
19159 Date: Tue Mar 11 15:05:26 2008 +0100
19161 ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
19163 This patch adds basic support for the AMCC 460EX/460GT PPC's.
19165 Signed-off-by: Stefan Roese <sr@denx.de>
19167 commit 56e410178375d9f20be25fb24e180974f0ae120b
19168 Author: Stefan Roese <sr@denx.de>
19169 Date: Tue Feb 19 22:07:57 2008 +0100
19171 ppc4xx: interrupt.c reworked
19173 This patch is a rework of the 4xx interrupt handling done while
19174 adding the 460EX/GT support. Interrupts are needed on 4xx for the
19177 Signed-off-by: Stefan Roese <sr@denx.de>
19179 commit 84a999b6cdd0b02dc7de2cacc306eaa84afe2b46
19180 Author: Stefan Roese <sr@denx.de>
19181 Date: Tue Feb 19 22:01:57 2008 +0100
19183 ppc4xx: program_tlb now uses 64bit physical addess
19185 This patch changes the physical addess parameter from 32bit to 64bit.
19186 This is needed for 36bit 4xx platforms to access areas located
19187 beyond the 4GB border, like SoC peripherals (EBC etc.).
19189 Signed-off-by: Stefan Roese <sr@denx.de>
19191 commit c3307fa186af85771924c434997089b8104c0a46
19192 Author: Stefan Roese <sr@denx.de>
19193 Date: Tue Feb 19 21:58:25 2008 +0100
19195 ppc4xx: miiphy.c reworked
19197 While adding the 460EX/GT support I reworked the 4xx miiphy code. It
19198 badly neede some cleanup.
19200 Signed-off-by: Stefan Roese <sr@denx.de>
19202 commit 88aff62df39c0756241ea9f9b5a7b3ade26cb82b
19203 Author: Stefan Roese <sr@denx.de>
19204 Date: Tue Feb 19 16:21:49 2008 +0100
19206 rtc: Add M41T62 support
19208 This patch add support for the STM M41T62 RTC. It is used and tested
19209 on the AMCC Canyonlands 406EX platform.
19211 Signed-off-by: Stefan Roese <sr@denx.de>
19213 commit 217d383e201adc7f2271145ae345ea5eae2b7170
19214 Author: Niklaus Giger <niklaus.giger@netstal.com>
19215 Date: Mon Feb 25 18:46:43 2008 +0100
19217 ppc4xx: Add 405GPr based MCU25 board specific files
19219 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19221 commit 75a66dcdb383863ad33f0534cfc27b7a86947dad
19222 Author: Niklaus Giger <niklaus.giger@netstal.com>
19223 Date: Mon Feb 25 18:46:42 2008 +0100
19225 ppc4xx: Add 405GPr based MCU25 board config file
19227 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19229 commit b05f35436b733a240559e77e46bed8439665ecc5
19230 Author: Niklaus Giger <niklaus.giger@netstal.com>
19231 Date: Mon Feb 25 18:46:41 2008 +0100
19233 ppc4xx: Add 405GPr based MCU25 board. Global files
19235 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19237 commit 14c27b35ac812a71abce6e3e2f4129d5e9313660
19238 Author: Niklaus Giger <niklaus.giger@netstal.com>
19239 Date: Mon Feb 25 18:37:02 2008 +0100
19241 ppc4xx: HCU4/5. remove obsolete hcu_flash.c
19243 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19245 commit a079494853cc2bfeddb26673219db0b4b2b31566
19246 Author: Niklaus Giger <niklaus.giger@netstal.com>
19247 Date: Mon Feb 25 18:37:01 2008 +0100
19249 ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
19251 Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
19252 the FLASH_CFI_LEGACY et al. config options.
19254 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
19256 commit e4170e5a50c8110f792bc37472833ae669d69951
19257 Author: Stefan Roese <sr@denx.de>
19258 Date: Tue Mar 11 13:52:25 2008 +0100
19260 ppc4xx: Fix comment in 405EX DDR2 init code
19262 Signed-off-by: Stefan Roese <sr@denx.de>
19264 commit 766529fccc860ecb9e955b4239dff69cd9e4ea09
19265 Author: Bartlomiej Sieka <tur@semihalf.com>
19266 Date: Fri Mar 14 16:22:34 2008 +0100
19268 Add MD5 support to the new uImage format
19270 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19272 commit 0ede0c383530a418cf98be9122371a86573cd0db
19273 Author: Bartlomiej Sieka <tur@semihalf.com>
19274 Date: Fri Mar 14 16:22:34 2008 +0100
19276 Add the MD5 algorithm
19278 MD5 supoprt is turned on by defining CONFIG_MD5, the digest can be then
19279 calculated using the md5() function -- see include/md5.h for details.
19281 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19283 commit b8aa57b5d4d69e8f0810a5e632c0ce41c0f46ee0
19284 Author: Wolfgang Denk <wd@denx.de>
19285 Date: Fri Mar 14 16:04:54 2008 +0100
19287 tools/setlocalversion: use a git-describe-ish format
19289 Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
19290 where 'nnnnn' is the number of commits since the last tag (i.e.,
19291 1.3.2-rc3). This makes it much easier to recognize "newer" versions
19292 and to see how much has been changed since the referenced tag.
19294 Stolen from Linux kernel's scripts/setlocalversio, see commit d882421f.
19296 Signed-off-by: Wolfgang Denk <wd@denx.de>
19298 commit c6dc21c84de0f159a1752c5ebd33cff843f63609
19299 Author: Wolfgang Denk <wd@denx.de>
19300 Date: Thu Mar 13 14:32:03 2008 +0100
19302 HMI1001: add support for MPC5200 Rev. B processors.
19304 Signed-off-by: Wolfgang Denk <wd@denx.de>
19306 commit 90f13dce7a7a9a84d5730576c9a24d0dbb07cb3a
19307 Author: Wolfgang Denk <wd@denx.de>
19308 Date: Thu Mar 13 14:29:49 2008 +0100
19310 TQM5200: remove dead code
19312 This board never used a MGT5100 processor.
19314 Signed-off-by: Wolfgang Denk <wd@denx.de>
19316 commit afe45c87e3c5d77bad76b1a57dccd20764d45b5d
19317 Author: Marian Balakowicz <m8@semihalf.com>
19318 Date: Wed Mar 12 12:14:15 2008 +0100
19320 [new uImage] Fix build issue on ARM
19322 ARM platforms don't have a bd->bi_memsize so use bd->bi_dram[0].size instead.
19324 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
19326 commit 3310c549a73a949430bfda90876df7552a1dab0c
19327 Author: Marian Balakowicz <m8@semihalf.com>
19328 Date: Wed Mar 12 12:13:13 2008 +0100
19330 [new uImage] Add new uImage format documentation and examples
19332 Create doc/uImage.FIT documentation directory with the following files:
19333 - command_syntax_extensions.txt : extended command syntax description
19334 - howto.txt : short usage howto
19335 - source_file_format.txt : internal new uImage format description
19337 Add example image source files:
19342 Update README appropriately.
19344 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19345 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19347 commit 1ec73761d2e247078f4520a265d463e8b73391a2
19348 Author: Marian Balakowicz <m8@semihalf.com>
19349 Date: Wed Mar 12 10:35:52 2008 +0100
19351 [new uImage] Fix definition of common bootm_headers_t fields
19353 verify, autostart and lmb fields are used regardless of CONFIG_FIT
19354 setting, move their definitions to common section.
19356 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19358 commit 1d1cb4270edc6a99276834064069717f9782c491
19359 Author: Marian Balakowicz <m8@semihalf.com>
19360 Date: Wed Mar 12 10:35:51 2008 +0100
19362 [new uImage] Fix build problems on trab board
19364 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19366 commit f773bea8e11f4a11c388dcee956b2444203e6b65
19367 Author: Marian Balakowicz <m8@semihalf.com>
19368 Date: Wed Mar 12 10:35:46 2008 +0100
19370 [new uImage] Add proper ramdisk/FDT handling when FIT configuration is used
19372 Save FIT configuration provied in the first bootm argument and use it
19373 when to get ramdisk/FDT subimages when second and third (ramdisk/FDT)
19374 arguments are not specified.
19376 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19378 commit 2682ce8a4225f23d72bb7fed069e928dd39d34ae
19379 Author: Marian Balakowicz <m8@semihalf.com>
19380 Date: Wed Mar 12 10:33:01 2008 +0100
19382 [new uImage] More verbose kernel image uncompress error message
19384 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19386 commit 1372cce2b9040fb640e5032b84e3a033a22d6ff0
19387 Author: Marian Balakowicz <m8@semihalf.com>
19388 Date: Wed Mar 12 10:33:01 2008 +0100
19390 [new uImage] Use show_boot_progress() for new uImage format
19392 This patch allocates a set of show_boot_progress() IDs for new uImage format
19393 and adds show_boot_progress() calls in new uImage format handling code.
19395 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19397 commit c28c4d193dbfb20b2dd3a5447640fd6de7fd0720
19398 Author: Marian Balakowicz <m8@semihalf.com>
19399 Date: Wed Mar 12 10:33:01 2008 +0100
19401 [new uImage] Add new uImage fromat support to fpga command
19403 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19405 commit 09475f7527460e426c0e0628fc5b8f3754fbaa23
19406 Author: Marian Balakowicz <m8@semihalf.com>
19407 Date: Wed Mar 12 10:33:01 2008 +0100
19409 [new uImage] Add new uImage format handling to other bootm related commands
19413 docboot - cmd_doc.c
19414 fdcboot - cmd_fdc.c
19415 diskboot - cmd_ide.c
19417 scsiboot - cmd_scsi.c
19418 usbboot - cmd_usb.c
19420 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19422 commit 1b7897f28d49a80d78d760ec6f6f11dc0f914338
19423 Author: Marian Balakowicz <m8@semihalf.com>
19424 Date: Wed Mar 12 10:33:00 2008 +0100
19426 [new uImage] Add new uImage format support to imgextract command
19428 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19430 commit 424c4abdd175d2c470510df8ce0e32d3f463ec16
19431 Author: Marian Balakowicz <m8@semihalf.com>
19432 Date: Wed Mar 12 10:33:00 2008 +0100
19434 [new uImage] Add new uImage format support to autoscript routine
19436 autoscript() routine is updated to accept second argument, which
19437 is only used for FIT images and provides a FIT subimage unit name.
19439 autoscript() routine callers must now pass two arguments. For
19440 non-interactive use (like in cmd_load.c, cmd_net.c), new environment
19441 variable 'autoscript_uname' is introduced and used as a FIT
19442 subimage unit name source.
19444 autoscript command accepts extended syntax of the addr argument:
19445 addr:<subimg_uname>
19447 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19449 commit cd7c596e9f561dbbc17b717277438aee78cde14f
19450 Author: Marian Balakowicz <m8@semihalf.com>
19451 Date: Wed Mar 12 10:33:00 2008 +0100
19453 [new uImage] Add new uImage format support to arch specific do_bootm_linux() routines
19455 This patch updates architecture specific implementations of
19456 do_bootm_linux() adding new uImage format handling for
19457 operations like get kernel entry point address, get kernel
19458 image data start address.
19460 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19462 commit 3dfe110149311425919e6d6a14b561b4207498f1
19463 Author: Marian Balakowicz <m8@semihalf.com>
19464 Date: Wed Mar 12 10:32:59 2008 +0100
19466 [new uImage] Add node offsets for FIT images listed in struct bootm_headers
19468 This patch adds new node offset fields to struct bootm_headers
19469 and updates bootm_headers processing code to make use of them.
19470 Saved node offsets allow to avoid repeating fit_image_get_node() calls.
19472 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19474 commit bc8ed486b125452ba3bd8344f052f437329150c5
19475 Author: Marian Balakowicz <m8@semihalf.com>
19476 Date: Wed Mar 12 10:32:53 2008 +0100
19478 [new uImage] ppc: Add new uImage format support to FDT handling routines
19480 Support for new (FIT) format uImages is added to powerpc specific
19481 boot_get_fdt() routine which now recognizes, sanity checks FIT image
19482 and is able to access data sections of the requested component image.
19484 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19486 commit a44a269a905f924b420020506a4d7d7eedcc0eaf
19487 Author: Marian Balakowicz <m8@semihalf.com>
19488 Date: Wed Mar 12 10:14:57 2008 +0100
19490 [new uImage] Re-enable interrupts for non automatic booting
19492 Re-enable interrupts if we return from do_bootm_<os> and 'autostart'
19493 environment variable is not set to 'yes'.
19495 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19497 commit d985c8498c4e47095820da97aa722381d39172c5
19498 Author: Marian Balakowicz <m8@semihalf.com>
19499 Date: Wed Mar 12 10:14:38 2008 +0100
19501 [new uImage] Remove unnecessary arguments passed to ramdisk routines
19503 boot_get_ramdisk() and image_get_ramdisk() do not need all
19504 cmdtp, flag, argc and argv arguments. Simplify routines definition.
19506 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19508 commit c87796483bc7c2900470dc747c367f602577608d
19509 Author: Marian Balakowicz <m8@semihalf.com>
19510 Date: Wed Mar 12 10:12:37 2008 +0100
19512 [new uImage] Add new uImage format support for ramdisk handling
19514 This patch updates boot_get_ramdisk() routine adding format
19515 verification and handling for new (FIT) uImages.
19517 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19519 commit 6986a385671749ecb3f60cf99e9cbae8e47bb50e
19520 Author: Marian Balakowicz <m8@semihalf.com>
19521 Date: Wed Mar 12 10:01:05 2008 +0100
19523 [new uImage] Add new uImage format support for kernel booting
19525 New format uImages are recognized by the bootm command,
19526 validity of specified kernel component image is checked and
19527 its data section located and used for further processing
19528 (uncompress, load, etc.)
19530 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19532 commit e32fea6adb620ecf2bd70acf2dd37e53df9d1547
19533 Author: Marian Balakowicz <m8@semihalf.com>
19534 Date: Tue Mar 11 12:35:20 2008 +0100
19536 [new uImage] Add new uImage format support for imls and iminfo commands
19538 imls and iminfo can now recognize nad print out contents of the new (FIT)
19541 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19543 commit 9d25438fe7d70cf35a8a293ea5e392fefc672613
19544 Author: Bartlomiej Sieka <tur@semihalf.com>
19545 Date: Tue Mar 11 12:34:47 2008 +0100
19547 [new uImage] Add support for new uImage format to mkimage tool
19549 Support for the new uImage format (FIT) is added to mkimage tool.
19550 Commandline syntax is appropriately extended:
19552 mkimage [-D dtc_options] -f fit-image.its fit-image
19554 mkimage (together with dtc) takes fit-image.its and referenced therein
19555 binaries (like vmlinux.bin.gz) as inputs, and produces fit-image file -- the
19556 final image that can be transferred to the target (e.g., via tftp) and then
19557 booted using the bootm command in U-Boot.
19559 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19561 commit eb6175edd6c120d8b89678243e5a2be362ee8e40
19562 Author: Marian Balakowicz <m8@semihalf.com>
19563 Date: Mon Mar 10 17:53:49 2008 +0100
19565 [new uImage] Make node unit names const in struct bootm_headers
19567 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19569 commit 5dfb52138688ccbf0146f62683fe6217b3ce1b05
19570 Author: Marian Balakowicz <m8@semihalf.com>
19571 Date: Fri Feb 29 21:24:06 2008 +0100
19573 [new uImage] New uImage low-level API
19575 Add FDT-based functions for handling new format component images,
19576 configurations, node operations, property get/set, etc.
19578 fit_ - routines handling global new format uImage operations
19579 like get/set top level property, process all nodes, etc.
19580 fit_image_ - routines handling component images subnodes
19581 fit_conf_ - routines handling configurations node
19583 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
19584 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
19586 commit 30f1806f60978d707b0cff2d7bf89d141fc24290
19587 Author: Wolfgang Denk <wd@denx.de>
19588 Date: Sun Mar 9 16:20:02 2008 +0100
19592 Update CHANGELOG for release.
19594 Signed-off-by: Wolfgang Denk <wd@denx.de>
19596 commit 5b464c289ba715d0979b6e1f94947bb8f1068d16
19597 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19598 Date: Sun Mar 9 14:52:11 2008 +0100
19600 SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
19602 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19603 Signed-off-by: Wolfgang Denk <wd@denx.de>
19605 commit db695b78515ddb88a2d4f3357c120345efbf59ec
19606 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19607 Date: Sun Mar 9 10:44:01 2008 +0100
19609 scb9328: Fix flash warning: type qualifiers ignored on function return type
19611 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19613 commit 2b3e7e61d6a72f16aee93f870bc6af67f30758c4
19614 Author: Wolfgang Denk <wd@denx.de>
19615 Date: Sun Mar 9 10:50:41 2008 +0100
19617 esd/common/fpga.c: fix indentation.
19619 Signed-off-by: Wolfgang Denk <wd@denx.de>
19621 commit cc3843e36453e2b8db65d7e56de938ba045016a0
19622 Author: Wolfgang Denk <wd@denx.de>
19623 Date: Sun Mar 9 10:33:31 2008 +0100
19625 common/kgdb.c: fix 'dereferencing type-punned pointer' warning
19627 and get rid of a couple of unneeded casts.
19629 Signed-off-by: Wolfgang Denk <wd@denx.de>
19631 commit 8d4f4a838d7dc7cf4de17e3e9a67e2f222b6a1c8
19632 Author: Wolfgang Denk <wd@denx.de>
19633 Date: Sun Mar 9 10:09:53 2008 +0100
19635 esd/common/fpga.c: fix 'assignment of read-only location' error
19637 Signed-off-by: Wolfgang Denk <wd@denx.de>
19639 commit c6fe4dabac066e8758345d249032768496983a3e
19640 Author: Wolfgang Denk <wd@denx.de>
19641 Date: Sun Mar 9 02:13:19 2008 +0100
19643 Makefile: make build silently again.
19645 Signed-off-by: Wolfgang Denk <wd@denx.de>
19647 commit 76babc86576f092573599334c85ec543fdbc6015
19648 Author: Wolfgang Denk <wd@denx.de>
19649 Date: Sun Mar 9 02:07:49 2008 +0100
19651 m501sk: Fix out of tree building
19653 Signed-off-by: Wolfgang Denk <wd@denx.de>
19655 commit 210ed2004e062fdd03f25ab4925998aa1bd08a07
19656 Author: Wolfgang Denk <wd@denx.de>
19657 Date: Sun Mar 9 00:06:09 2008 +0100
19659 ADS5121: fix out of tree build
19661 and simplify Makefile a bit.
19663 Signed-off-by: Wolfgang Denk <wd@denx.de>
19665 commit 46cb5074a3f74de64ebd97dd0c4ec7eb3d768b93
19666 Author: Wolfgang Denk <wd@denx.de>
19667 Date: Sat Mar 8 22:35:31 2008 +0100
19671 Signed-off-by: Wolfgang Denk <wd@denx.de>
19673 commit 78a90f827df74520e939c794fc7413dace21c4db
19674 Author: Wolfgang Denk <wd@denx.de>
19675 Date: Sat Mar 8 22:35:04 2008 +0100
19679 Signed-off-by: Wolfgang Denk <wd@denx.de>
19681 commit 58f3c57c6008b42e01f551d3be6efd88c14ac87f
19682 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19683 Date: Sat Mar 8 21:30:04 2008 +0100
19685 esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
19687 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19689 commit d75469d48c05795144f4b8ba76addbb4920a7bba
19690 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19691 Date: Sat Mar 8 09:25:49 2008 +0900
19693 net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
19695 When rtl_recv() of rtl8169 is called, OWNbit of status register
19696 is not enable occasionally.
19697 rtl_recv() doesn't work normally when the driver doesn't do
19698 appropriate processing.
19699 This patch fix this problem.
19701 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
19703 commit 82afabfeb8ae6a27c7b396011ea99f4712aa73fa
19704 Author: Heiko Schocher <hs@denx.de>
19705 Date: Fri Mar 7 08:15:28 2008 +0100
19707 mgsuvd: update board configuration
19709 initialize the UPIOx controller.
19711 Signed-off-by: Heiko Schocher <hs@denx.de>
19713 commit e492c90c26215e459aec0fdf0f8ef1fd204988f5
19714 Author: Heiko Schocher <hs@denx.de>
19715 Date: Fri Mar 7 08:13:41 2008 +0100
19717 mgcoge: update board configuration
19719 add support for the config Flash.
19720 initialize the UPIOx controller.
19722 Signed-off-by: Heiko Schocher <hs@denx.de>
19724 commit 270fe261b7f9292800b2b3d1bf19ae7cbc880258
19725 Author: Kim Phillips <kim.phillips@freescale.com>
19726 Date: Fri Mar 7 12:27:31 2008 -0600
19728 mpc83xx: make dtb basename file references equal those of linux
19730 the dts file basenames were updated in linux - this helps avoid
19731 inadvertently loading any old dtbs laying around.
19733 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19735 commit f30b6154f16f5ffa4a9f5bfca5e114d72b6ef675
19736 Author: Kim Phillips <kim.phillips@freescale.com>
19737 Date: Wed Feb 27 16:08:22 2008 -0600
19739 net: uec_phy: actually increment the timeout counter
19741 allow u-boot to recover (and, e.g., switch to another interface) in the
19742 case where a PHY does not report autonegotiation is complete within its
19743 two second timeout value.
19745 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
19747 commit 772003e43957ee0c895abed7cd82cbe72820cbb8
19748 Author: Markus Brunner <super.firetwister@googlemail.com>
19749 Date: Wed Mar 5 21:38:12 2008 +0100
19751 fix taihu soft spi_read
19753 The taihu board used gpio_read_out_bit which reads the output register and not
19756 Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
19758 commit fc84a8495ac750f6b4adae81f8c4f100f65b6340
19759 Author: Stefan Roese <sr@denx.de>
19760 Date: Fri Mar 7 08:01:43 2008 +0100
19762 ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
19764 Signed-off-by: Stefan Roese <sr@denx.de>
19766 commit bd4458cb47abecabd406b1210457be96c69fc49d
19767 Author: Dave Liu <r63238@freescale.com>
19768 Date: Tue Mar 4 16:59:22 2008 +0800
19770 837xEMDS: Improve the system performance
19772 1. Make the CSB bus pipeline depth as 4, and enable
19774 2. Raise the eTSEC emergency priority;
19775 3. Use the highest IP blocks clock.
19777 Signed-off-by: Dave Liu <daveliu@freescale.com>
19779 commit d8ab58b212481b1c57947ea21aa96c4ce800d0b4
19780 Author: Detlev Zundel <dzu@denx.de>
19781 Date: Thu Mar 6 16:45:53 2008 +0100
19783 Replace "run load; run update" with conditionalized "run load update".
19785 The latter version stops when "run load" fails for whatever reasons
19786 rendering the combination *a lot* more secure.
19788 Signed-off-by: Detlev Zundel <dzu@denx.de>
19790 commit 6bc113886d7d316df1a4e459bec8baf027518551
19791 Author: Stefan Roese <sr@denx.de>
19792 Date: Tue Mar 4 17:40:41 2008 +0100
19794 net: Print error message upon net usage when no ethernet-interface is found
19796 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
19797 defined. Then no ethernet interface is available but a simple "tftp"
19798 command will return without any error message which is quite confusing.
19800 Signed-off-by: Stefan Roese <sr@denx.de>
19802 commit a30a549a3553032d809e0356306b62de0b125901
19803 Author: Jon Loeliger <jdl@freescale.com>
19804 Date: Tue Mar 4 10:03:03 2008 -0600
19806 Remove erroneous or extra spd.h #includers.
19808 Many of the spd.h #includers don't need it,
19809 and wanted to have spd_sdram() declared instead.
19810 Since they didn't get that, some also had open
19811 coded extern declarations of it instead or as well.
19812 Fix it all up by using spd_sdram.h where needed.
19814 Signed-off-by: Jon Loeliger <jdl@freescale.com>
19816 commit a4475386cef14af3fd88f0518b688e755669486d
19817 Author: Wolfgang Denk <wd@denx.de>
19818 Date: Tue Mar 4 17:41:28 2008 +0100
19820 PCS440EP: fix build problems (redundant #define)
19822 Signed-off-by: Wolfgang Denk <wd@denx.de>
19824 commit e85e2fa85ec09a6fac2846d1d881d8737e2bbda9
19825 Author: Stefan Roese <sr@denx.de>
19826 Date: Tue Mar 4 17:39:25 2008 +0100
19828 net: Print error message upon net usage when no ethernet-interface is found
19830 This patch fixes a problem seen on PPC4xx boards, when no MAC address is
19831 defined. Then no ethernet interface is available but a simple "tftp"
19832 command will return without any error message which is quite confusing.
19834 Signed-off-by: Stefan Roese <sr@denx.de>
19836 commit 384faaafb999cae3ce447c93e28a0b7e2e5fef53
19837 Author: Wolfgang Denk <wd@denx.de>
19838 Date: Tue Mar 4 17:38:50 2008 +0100
19840 W7OLMC/W7OLMG: fix build problems (redundant #define)
19842 Signed-off-by: Wolfgang Denk <wd@denx.de>
19844 commit f9301e1cda296245ba052d7b08321199c3d0af9d
19845 Author: Wolfgang Denk <wd@denx.de>
19846 Date: Tue Mar 4 14:58:31 2008 +0100
19848 Makefile: fix problem with out-of-tree builds introduced by 5013c09f
19850 Commit 5013c09f (Makefile: cleanup "clean" target) introduced a
19851 problem for out-of-tree builds which caused "make clean" to fail.
19853 Signed-off-by: Wolfgang Denk <wd@denx.de>
19855 commit dfece9500556bed5d8244b1c15d973cec7c25bfe
19856 Author: Wolfgang Denk <wd@denx.de>
19857 Date: Tue Mar 4 11:58:26 2008 +0100
19859 examples/Makefile: build "hello_world" on 8xx, too.
19861 Signed-off-by: Wolfgang Denk <wd@denx.de>
19863 commit 74eb0222594fd23aafdf168e60e872814eea8b62
19864 Author: Mike Nuss <mike@terascala.com>
19865 Date: Mon Mar 3 15:27:05 2008 -0500
19867 PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
19869 Every now and then a Sequoia board (or equivalent hardware) had
19870 problems connecting to a Gigabit capable network interface.
19872 There were differences in the PHY setup between Linux and U-Boot.
19874 This patch fixes the problem. Apparently "remote fault" is being set,
19875 which signals to some devices (on the other end of the cable) that a
19876 fault has occurred, while other devices ignore it. I believe the RF bit
19877 was causing the issue, but I removed T4 also, to match up with Linux.
19879 Signed-off-by: Mike Nuss <mike@terascala.com>
19881 commit 491fb6dea9f52fdb9cb5996e8e978b9e9685179f
19882 Author: Timur Tabi <timur@freescale.com>
19883 Date: Mon Mar 3 09:58:52 2008 -0600
19885 fix QE firmware uploading limit
19887 Fix a typo in qe_upload_firmware() that prevented uploading firmware on
19888 systems with more than one RISC core.
19890 Signed-off-by: Timur Tabi <timur@freescale.com>
19892 commit 42ba58e0c302b339a3c2faa6006a013c6f186b7a
19893 Author: Bernhard Nemec <bnemec@ganssloser.com>
19894 Date: Mon Mar 3 11:57:23 2008 +0000
19896 Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)
19898 Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>,
19899 see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846
19901 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
19903 commit 84d0c2f1e39caff58bf765a7ab7c72da23c25ec8
19904 Author: Kim B. Heino <Kim.Heino@bluegiga.com>
19905 Date: Mon Mar 3 10:39:13 2008 +0200
19907 fix copy from ram to dataflash
19909 If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash
19910 routines instead of dataflash. This is because it checks "if source
19911 address is not dataflash" instead of target address.
19913 Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
19915 commit 32bf3d143a888f8deacfdcc97e898f6c06d0aea4
19916 Author: Wolfgang Denk <wd@denx.de>
19917 Date: Mon Mar 3 12:16:44 2008 +0100
19919 Fix quoting problem (preboot setting) in many board config files.
19921 Signed-off-by: Wolfgang Denk <wd@denx.de>
19923 commit 5b0b2b6fc9fe22e3864c2a57316d91a2507ec215
19924 Author: Wolfgang Denk <wd@denx.de>
19925 Date: Mon Mar 3 12:36:49 2008 +0100
19927 ADS5121: Fix default environment.
19929 Signed-off-by: Wolfgang Denk <wd@denx.de>
19931 commit 91c82076ae492bb1f9d9c47a481314631d32dc8e
19932 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19933 Date: Sun Mar 2 16:12:31 2008 +0100
19935 Makefile: Fix missing unconfig and mkconfig use
19937 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
19939 commit 8ce4e5c2c02cb7e8adddf7b651d3050d81ce4c1d
19940 Author: michael <trimarchi@gandalf.sssup.it>
19941 Date: Sun Mar 2 23:33:46 2008 +0100
19943 Fix checking fat32 cluster size.
19945 This fixes the cluster size tests in the FAT32 file system.
19946 The current implementation of VFAT support doesn't work if the
19947 referred cluster has an offset > 16bit representation, causing
19948 "fatload" and "fatls" commands etc. to fail.
19950 Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
19952 commit 661bad63a076a96c39c64f136915f146725af92b
19953 Author: Wolfgang Denk <wd@denx.de>
19954 Date: Sun Mar 2 22:57:23 2008 +0100
19956 Prepare v1.3.2-rc2 release candidate
19958 Signed-off-by: Wolfgang Denk <wd@denx.de>
19960 commit 76957cb3d621bf664311908e5962e151c633c285
19961 Author: Stefan Roese <sr@denx.de>
19962 Date: Sat Mar 1 12:11:40 2008 +0100
19964 ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1
19966 The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But
19967 currently 4k/2k is configured. This patch fixes this issue.
19969 Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out.
19971 Signed-off-by: Stefan Roese <sr@denx.de>
19973 commit 118978c8eb43803e2794233922df4249fa278b83
19974 Author: Woodruff, Richard <r-woodruff2@ti.com>
19975 Date: Fri Feb 29 17:34:35 2008 -0600
19977 Fix alignment error on ARM for modules
19979 Fix alignment fault on ARM when running modules. With out an explicit
19980 linker file gcc4.2.1 will half word align __bss_start's value. The word
19981 dereference will crash hello_world.
19983 signed-off-by Richard Woodruff <r-woodruff2@ti.com>
19985 commit ce1120dd703e6f12c59e4eba9962356a0300b832
19986 Author: Dave Liu <r63238@freescale.com>
19987 Date: Fri Feb 29 17:45:31 2008 +0800
19989 fs: Fix ext2 read issue
19991 The ext2 aligned process will corrupt the key
19992 data struct, the patch fix this.
19994 Signed-off-by: Dave Liu <daveliu@freescale.com>
19996 commit 5013c09f7a5675952a3ca88b6bc6c924e63af33e
19997 Author: Wolfgang Denk <wd@denx.de>
19998 Date: Sun Mar 2 22:45:33 2008 +0100
20000 Makefile: cleanup "clean" target
20002 Make sure CDPATH settings cannot interfere.
20005 Signed-off-by: Wolfgang Denk <wd@denx.de>
20007 commit ffda586fc1373243c9794babde69500f6293a8d8
20008 Author: Li Yang <leoli@freescale.com>
20009 Date: Fri Feb 29 11:46:05 2008 +0800
20011 add cscope build target
20013 Add cscope build target to generate cscope database for code browsing.
20015 Signed-off-by: Li Yang <leoli@freescale.com>
20017 commit f655adef65e4cf6b929054b049ee19ae9b5ccbe2
20018 Author: Kim Phillips <kim.phillips@freescale.com>
20019 Date: Wed Feb 27 15:06:39 2008 -0600
20021 net: uec_phy: handle 88e1111 rev.B2 erratum 5.6
20023 erratum 5.6 states the autoneg completion bit is functional only if the
20024 autoneg bit is asserted.
20026 This fixes any secondarily-issued networking commands on non-gigabit
20027 links on the mpc8360 mds board.
20029 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
20031 commit 5f91db7f582ca17b1f19f10189c025696f333d2e
20032 Author: John Rigby <jrigby@freescale.com>
20033 Date: Tue Feb 26 09:38:14 2008 -0700
20035 MPC5121e ADS PCI support take 3
20037 Adds PCI support for MPC5121
20039 Tested with drivers/net/rtl8139.c
20041 Support is conditional since PCI on old silicon does not work.
20043 ads5121_PCI_config turns on PCI
20045 In this version, condition compilation of PCI code has been moved
20046 from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as
20047 suggested by Jean-Christophe PLAGNIOL-VILLARD
20049 Signed-off-by: John Rigby <jrigby@freescale.com>
20051 commit 44b4dbed4133f657705b7c5193209da9978243a7
20052 Author: Anatolij Gustschin <agust@denx.de>
20053 Date: Mon Feb 25 23:53:07 2008 +0100
20055 Fix warnings while compilation of post/drivers/memory.c
20057 Fix warnings while compilation with new gcc in eldk-4.2
20059 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20061 commit 4fae35a53b3e958254d6574a1cc7e10811fc6726
20062 Author: Anatolij Gustschin <agust@denx.de>
20063 Date: Mon Feb 25 20:54:04 2008 +0100
20065 ppc4xx: Fix problem in 4xx_enet.c driver
20067 U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is
20068 enabled. To reproduce the problem ensure that 'ethrotate'
20069 environment variable isn't set to "no" and then run
20070 "tftp 200000 not_existent_file".
20071 This patch tries to fix the issue.
20073 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20075 commit 60ec654c5eb80d0fe0c38a3bd42140215bc06484
20076 Author: Anatolij Gustschin <agust@denx.de>
20077 Date: Mon Feb 25 20:04:20 2008 +0100
20079 POST: Disable cache while SPR POST
20081 Currently (since commit b2e2142c) u-boot crashes on
20082 sequoia board while SPR test if CONFIG_4xx_DCACHE is
20083 enabled. This patch disables the cache while SPR test.
20085 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20087 commit c313b2c6c555e7d89ec59bd51c59ab164ad0105d
20088 Author: Martin Krause <martin.krause@tqs.de>
20089 Date: Mon Feb 25 17:52:40 2008 +0100
20091 TQM5200: use automatic fdt memory fixup (part 2)
20093 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
20094 TB5200 and TB5200_B to fixup the /memory node with the memory values
20095 detected by U-Boot.
20097 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20099 commit 44ceec253ea941b301abf4b079d52324def69d92
20100 Author: Martin Krause <martin.krause@tqs.de>
20101 Date: Mon Feb 25 15:17:05 2008 +0100
20103 TQM5200: use automatic fdt memory fixup
20105 Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S,
20106 TB5200 and TB5200_B to fixup the /memory node with the memory values
20107 detected by U-Boot.
20109 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20111 commit f3a329acb26017d8e10e9c93e1e726c2a5ac634a
20112 Author: Martin Krause <martin.krause@tqs.de>
20113 Date: Mon Feb 25 13:27:52 2008 +0100
20115 TQM5200: fix bug in SDRAM initialization code
20117 This patch fixes a bug in the SDRAM initialization code for the
20118 TQM5200. The hi_addr bit is now set correctly. Without this patch
20119 the hi_addr bit is always set to 1, if the second SDRAM bank is
20122 For other MPC5200 boards a correspondig patch has already been applied
20123 some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c.
20125 Signed-off-by: Martin Krause <martin.krause@tqs.de>
20127 Forget the first patch please. I confused flash with SDRAM in
20130 commit 217bf6b6a313d9ccb619a4dbc09f73f77cd48df1
20131 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20132 Date: Mon Feb 25 00:03:12 2008 +0100
20134 mx1fs2/flash: Fix multiple compiler warnings
20136 "pointer targets in assignment differ in signedness"
20138 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20140 commit 5599c28cef55be42a8ca6fa8086b1a44e56a85d2
20141 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20142 Date: Mon Feb 25 00:03:11 2008 +0100
20144 arm-imx: Fix register definitions
20146 Sync register definitions with linux
20148 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20150 commit c9bcf75fecc58886af77d2a571cff2eab39eab6f
20151 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20152 Date: Mon Feb 25 00:03:10 2008 +0100
20154 actua1/actua2/actua3: Fix multiple unused variable warnings
20157 actux1.c: In function 'checkboard':
20158 actux1.c:92: warning: unused variable 'revision'
20161 actux2.c: In function 'checkboard':
20162 actux2.c:100: warning: unused variable 's'
20163 actux2.c:99: warning: unused variable 'revision'
20164 actux2.c: In function 'reset_phy':
20165 actux2.c:130: warning: unused variable 'i'
20168 actux3.c: In function 'checkboard':
20169 actux3.c:114: warning: unused variable 'revision'
20171 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20173 commit f8fa6368a6a0c02164da8e2f52f18d457c6977bd
20174 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20175 Date: Sun Feb 24 11:44:29 2008 +0900
20177 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
20179 The previous patch was lacking of i386, microblaze, nios and nios2. This
20180 patch tries to fix them.
20182 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20184 commit 05e07b1ea22844e946cfcf7d5e8a0199d18d2a95
20185 Author: Marian Balakowicz <m8@semihalf.com>
20186 Date: Fri Feb 29 22:22:46 2008 +0100
20188 [new uImage] Fix FDT blob totalsize calculation in boot_relocate_fdt()
20190 Do not use global fdt blob pointer, calculate blob size from routine
20191 argument blob pointer.
20193 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20195 commit d1cc52879c8966507dad9fb575481e6d3985e64e
20196 Author: David Gibson <david@gibson.dropbear.id.au>
20197 Date: Tue Feb 12 00:58:31 2008 +1100
20199 libfdt: Add and use a node iteration helper function.
20201 This patch adds an fdt_next_node() function which can be used to
20202 iterate through nodes of the tree while keeping track of depth. This
20203 function is used to simplify the iteration code in a lot of other
20204 functions, and is also exported for use by library users.
20206 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
20208 commit 8cf30809a82902a471866d2f07725ce3b8a22291
20209 Author: Bartlomiej Sieka <tur@semihalf.com>
20210 Date: Fri Feb 29 16:00:24 2008 +0100
20212 [new uImage] Add libfdt support to mkimage
20214 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20216 commit a6e530f00d31a8494a0422799b2b9a692a9c0eb9
20217 Author: Bartlomiej Sieka <tur@semihalf.com>
20218 Date: Fri Feb 29 16:00:23 2008 +0100
20220 [new uImage] Add sha1.o object to mkimage binary build
20222 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
20224 commit df6f1b895c997978f03afe04502ee76b7ba34ab9
20225 Author: Marian Balakowicz <m8@semihalf.com>
20226 Date: Fri Feb 29 16:00:06 2008 +0100
20228 [new uImage] Fix component handling for legacy multi component images
20230 Use uint32_t when accessing size table in image_multi_count() and
20231 image_multi_getimg() for multi component images.
20233 Add missing uimage_to_cpu() endianness conversion.
20235 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20237 commit 570abb0ad120f6002bcaa3cf6f32bd4ca2e1b248
20238 Author: Marian Balakowicz <m8@semihalf.com>
20239 Date: Fri Feb 29 15:59:59 2008 +0100
20241 [new uImage] Share common uImage code between mkimage and U-boot
20243 This patch adds the following common routines:
20245 1) Dedicated mkimage print_header() is replaced with common
20246 image_print_contents()
20247 image_print_contents_noindent()
20249 2) Common os/arch/type/comp fields name <--> id translation routines
20250 genimg_get_os_name()
20251 genimg_get_arch_name()
20252 genimg_get_type_name()
20253 genimg_get_comp_name()
20255 genimg_get_arch_id()
20256 genimg_get_type_id()
20257 genimg_get_comp_id()
20259 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20261 commit 9a4daad0a35eb5143037eea9f786a3e9d672bdd6
20262 Author: Marian Balakowicz <m8@semihalf.com>
20263 Date: Fri Feb 29 14:58:34 2008 +0100
20265 [new uImage] Update naming convention for bootm/uImage related code
20267 This patch introduces the following prefix convention for the
20268 image format handling and bootm related code:
20270 genimg_ - dual format shared code
20271 image_ - legacy uImage format specific code
20272 fit_ - new uImage format specific code
20273 boot_ - booting process related code
20275 Related routines are renamed and a few pieces of code are moved around and
20278 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20280 commit 75fa002c47171b73fb4c1f2c2fe4d6391c136276
20281 Author: Kumar Gala <galak@kernel.crashing.org>
20282 Date: Wed Feb 27 21:51:51 2008 -0600
20284 [new uImage] Respect autostart setting in linux bootm
20286 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20287 Acked-by: Marian Balakowicz <m8@semihalf.com>
20289 commit d3f2fa0d278467b2232e4eb2372f905c3febfbeb
20290 Author: Kumar Gala <galak@kernel.crashing.org>
20291 Date: Wed Feb 27 21:51:50 2008 -0600
20293 [new uImage] Provide ability to restrict region used for boot images
20295 Allow the user to set 'bootm_low' and 'bootm_size' env vars as a way
20296 to restrict what memory range is used for bootm.
20298 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20299 Acked-by: Marian Balakowicz <m8@semihalf.com>
20301 commit e822d7fc4dd4755d4d0a22f05e33f33d1a0481da
20302 Author: Kumar Gala <galak@kernel.crashing.org>
20303 Date: Wed Feb 27 21:51:49 2008 -0600
20305 [new uImage] Use lmb for bootm allocations
20307 Convert generic ramdisk_high(), get_boot_cmdline(), get_boot_kbd()
20308 functions over to using lmb for allocation of the ramdisk, command line
20309 and kernel bd info.
20311 Convert PPC specific fdt_relocate() to use lmb for allocation of the device
20314 Provided a weak function that board code can call to do additional
20315 lmb reserves if needed.
20317 Also introduce the concept of bootmap_base to specify the offset in
20318 physical memory that the bootmap is located at. This is used for
20319 allocations of the cmdline, kernel bd, and device tree as they should
20320 be contained within bootmap_base and bootmap_base + CFG_BOOTMAPSZ.
20322 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20324 commit f5614e7926863bf0225ec860d9b319741a9c4004
20325 Author: Kumar Gala <galak@kernel.crashing.org>
20326 Date: Wed Feb 27 21:51:48 2008 -0600
20328 [new uImage] Add autostart flag to bootm_headers structure
20330 The autostart env variable was dropped as part of the initial new uImage
20331 cleanup. Add it back here so the arch specific code can decide if it
20332 wants to really boot or not.
20334 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20335 Acked-by: Marian Balakowicz <m8@semihalf.com>
20337 commit 4ed6552f715983bfc7d212c1199a1f796f1144ad
20338 Author: Kumar Gala <galak@kernel.crashing.org>
20339 Date: Wed Feb 27 21:51:47 2008 -0600
20341 [new uImage] Introduce lmb from linux kernel for memory mgmt of boot images
20343 Introduce the LMB lib used on PPC in the kernel as a clean way to manage
20344 the memory spaces used by various boot images and structures. This code
20345 will allow us to simplify the code in bootm and its support functions.
20347 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20349 commit 4648c2e7a173b0d7f17bef4adaa0623090c9e904
20350 Author: Kumar Gala <galak@kernel.crashing.org>
20351 Date: Tue Feb 19 22:03:47 2008 -0600
20353 [new uImage] ppc: Allow boards to specify effective amount of memory
20355 For historical reasons we limited the stack to 256M because some boards
20356 could only map that much via BATS. However newer boards are capable of
20357 mapping more memory (for example 85xx is capable of doing up to 2G).
20359 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20360 Acked-by: Marian Balakowicz <m8@semihalf.com>
20362 commit 274cea2bddbca10cdad7daa518951b75c44ef6bc
20363 Author: Kumar Gala <galak@kernel.crashing.org>
20364 Date: Wed Feb 27 21:51:46 2008 -0600
20366 [new uImage] rework error handling so common functions don't reset
20368 Changed image_get_ramdisk() to just return NULL on error and have
20369 get_ramdisk() propogate that error to the caller. It's left to the
20370 caller to call do_reset() if it wants to.
20372 Also moved calling do_reset() in get_fdt() and fdt_relocate() on ppc
20373 to a common location. In the future we will change get_fdt() and
20374 fdt_relocate() to return success/failure and not call do_reset() at all.
20376 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20377 Acked-by: Marian Balakowicz <m8@semihalf.com>
20379 commit d2bc095a639672def11d5d043b5688d0dbd692ec
20380 Author: Kumar Gala <galak@kernel.crashing.org>
20381 Date: Wed Feb 27 21:51:45 2008 -0600
20383 [new uImage] ppc: Re-order ramdisk/fdt handling sequence
20385 Doing the fdt before the ramdisk allows us to grow the fdt w/o concern
20386 however it does mean we have to go in and fixup the initrd info since
20387 we don't know where it will be.
20389 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20391 commit 27953493ef025fb698d68c5dee39b36f01f4d530
20392 Author: Kumar Gala <galak@kernel.crashing.org>
20393 Date: Wed Feb 27 21:51:44 2008 -0600
20395 [new uImage] ppc: Determine if we are booting an OF style
20397 If we are bootin OF style than we can skip setting up some things
20398 that are used for the old boot method.
20400 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20401 Acked-by: Marian Balakowicz <m8@semihalf.com>
20403 commit a6612bdfe7ef37b9787b66800cf02aaded05fbeb
20404 Author: Kumar Gala <galak@kernel.crashing.org>
20405 Date: Wed Feb 27 21:51:43 2008 -0600
20407 [new uImage] Don't pass kdb to ramdisk_high since we may not have one
20409 We don't actually need the kdb param as we are just using it to get
20410 bd->bi_memsize which we can get from gd->bd->bi_memsize. Also, if we
20411 boot via OF we might not actually fill out a kdb.
20413 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20414 Acked-by: Marian Balakowicz <m8@semihalf.com>
20416 commit 2b22fa4baee51e6b467c44ea1be0d1ecd86e8775
20417 Author: Kumar Gala <galak@kernel.crashing.org>
20418 Date: Wed Feb 27 16:30:47 2008 -0600
20420 85xx: Don't icbi when unlocking the cache
20422 There is no reason to icbi when invalidating the temporary stack in
20423 the d-cache. Its impossible on e500 to have the i-cache contain
20424 any addresses in the temp stack and it can be problematic in generating
20425 transactions on the bus to non-valid addresses.
20427 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20429 commit 534ea6b6f86f8b75ef2ac061ef110a98f103d7d6
20430 Author: Andy Fleming <afleming@freescale.com>
20431 Date: Wed Feb 27 15:50:50 2008 -0600
20433 Fix source for ECM error IVPR
20435 The source vector for the ECM was being set to 2,
20436 but that's what the source vector for DDR was being
20437 set to. Change it to 1.
20439 Signed-off-by: Andy Fleming <afleming@freescale.com>
20441 commit 21fae8b2b4e4e6e648796e07e20ab13e9cb18923
20442 Author: Andy Fleming <afleming@freescale.com>
20443 Date: Wed Feb 27 14:29:58 2008 -0600
20445 Invalidate INIT_RAM TLB mappings
20447 Commit 0db37dc... (and some others) changed the INIT_RAM TLB
20448 mappings to be unguarded. This collided with an existing "bug"
20449 where the mappings for the INIT_RAM were being kept around.
20450 This meant that speculative loads to those addresses were
20451 succeeding in the TLB, and going out to the bus, where they
20452 were causing an exception (there's nothing at that address). The
20453 Flash code was coincidentally causing such a speculative load.
20454 Rather than go back to mapping the INIT RAM as guarded, we fix
20455 it so that the entries for the INIT_RAM are invalidated. Thus
20456 the speculative loads will fail in the TLB, and have no effect.
20458 Signed-off-by: Andy Fleming <afleming@freescale.com>
20460 commit 347b7938d3e561eb215aa386c37fb5acb5a383c6
20461 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20462 Date: Sun Feb 17 22:56:17 2008 +0100
20464 sbc8548: Fix Revision reading and unused variable 'path'
20466 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20468 commit 495d162374c472f46454453553382ad0735dc725
20469 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20470 Date: Sun Feb 17 22:56:16 2008 +0100
20472 sbc8548: Fix cfi flash bank declaration
20474 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20476 commit 4efbe9dbb129f857f27856936112c8c02f016be6
20477 Author: Marian Balakowicz <m8@semihalf.com>
20478 Date: Wed Feb 27 11:02:26 2008 +0100
20480 [new uImage] Correct raw FDT blob handlig when CONFIG_FIT is disabled
20482 Dual format image code must properly handle all three FDT passing methods:
20483 - raw FDT blob passed
20484 - FDT blob embedded in the legacy uImage
20485 - FDT blob embedded in the new uImage
20487 This patch enables proper raw FDT handling when no FIT imaeg support
20488 is compiled in. This is a bit tricky as we must dected FIT format even
20489 when FIT uImage handling is not enabled as both FIT uImages and raw FDT
20490 blobs use tha same low level format (libfdt).
20492 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20494 commit ff0734cff0fb5397ce2f4602f4f3e5ec9c8a36e8
20495 Author: Marian Balakowicz <m8@semihalf.com>
20496 Date: Wed Feb 27 11:02:26 2008 +0100
20498 [new uImage] POWERPC: Add image_get_fdt() routine
20500 FDT blob may be passed either: (1) raw (2) or embedded in the legacy uImage
20501 (3) or embedded in the new uImage. For the (2) case embedding image must be
20502 verified before we get FDT from it. This patch factors out legacy image
20503 specific verification routine to the separate helper routine.
20505 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20506 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20508 commit 1efd43601f90de21ec6c0ebb9880823e822927b1
20509 Author: Marian Balakowicz <m8@semihalf.com>
20510 Date: Wed Feb 27 11:02:07 2008 +0100
20512 [new uImage] Add image_get_kernel() routine
20514 Legacy image specific verification is factored out to a separate helper
20515 routine to keep get_kernel() generic and simple.
20517 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20518 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20520 commit 8a5ea3e6168fe6a2780eeaf257a3b19f30dec658
20521 Author: Marian Balakowicz <m8@semihalf.com>
20522 Date: Wed Feb 27 11:01:04 2008 +0100
20524 [new uImage] Move image verify flag to bootm_headers structure
20526 Do not pass image verification flag directly to related routines.
20527 Simplify argument passing and move it to the bootm_header structure which
20528 contains curently processed image specific data and is already being passed
20529 on the argument list.
20531 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20532 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20534 commit 823afe7cefe00dafefc6696c1cc7aa828c394234
20535 Author: Marian Balakowicz <m8@semihalf.com>
20536 Date: Wed Feb 27 11:00:47 2008 +0100
20538 [Makefile] Sort COBJS in lib_<arch> Makefiles
20540 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20542 commit 6f0f9dfc4ee880fbf400a2ebe14238181a6c3f91
20543 Author: Marian Balakowicz <m8@semihalf.com>
20544 Date: Wed Feb 27 11:00:47 2008 +0100
20546 [new uImage] Optimize gen_get_image() flow control
20548 When CONFIG_HAS_DATAFLASH is not defined gen_get_image() routine has nothing
20549 to do, update its control flow to better reflect that simple case.
20551 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20552 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20554 commit d2ced9eb19ec74f4a359949dbe353427fa6d55ca
20555 Author: Marian Balakowicz <m8@semihalf.com>
20556 Date: Mon Feb 4 08:28:17 2008 +0100
20558 [new uImage] POWERPC: Split get_fdt() into get and relocate routines
20560 PPC specific FDT blob handling code is divided into two separate routines:
20562 get_fdt() - find and verify a FDT blob (either raw or image embedded)
20563 fdt_relocate() - move FDT blob to within BOOTMAP if needed
20565 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20566 Acked-by: Kumar Gala <galak@kernel.crashing.org>
20568 commit 33fa5c0bfaf465de8ceb23fcd6b397f68b35a817
20569 Author: Jon Loeliger <jdl@freescale.com>
20570 Date: Mon Feb 25 13:13:37 2008 -0600
20572 86xx: Fix renamed GUR symbols in sbc8641d board.
20574 Back in commit a551cee99ad1d1da20fd23ad265de47448852f56
20575 (86xx: Fix GUR PCI config registers properly), we should have
20576 changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL
20577 symbols in the sbc8641d board as well. Fix this oversight.
20579 Signed-off-by: Jon Loeliger <jdl@freescale.com>
20581 commit 64cd594e623c39f73964d18787763e4533f791f7
20582 Author: Stefan Roese <sr@denx.de>
20583 Date: Mon Feb 25 16:50:48 2008 +0100
20585 ppc4xx: Fix acadia_nand build problem
20587 Don't include testdram() on NAND-booting target acadia_nand. This saves
20588 a few bytes and makes the target build clean again.
20590 Signed-off-by: Stefan Roese <sr@denx.de>
20592 commit 14e099e698d41e8179d05c2b2dbcf704a236f748
20593 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20594 Date: Sun Feb 24 23:03:12 2008 +0000
20596 mx1fs2/flash: Fix multiple pointertargets in assignment differ in signedness
20598 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20600 commit 724902c8464e610642b3a170278b99710325888e
20601 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20602 Date: Sun Feb 24 23:03:11 2008 +0000
20604 arm-imx: Fix registers definition
20606 Sync registers definition with linux
20608 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20610 commit 4cd288b589ea1178947c6e364453c32b3dede6b7
20611 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20612 Date: Sun Feb 24 23:03:10 2008 +0000
20614 actua1/actua2/actua3: Fix multipleunused variable
20617 actux1.c: In function 'checkboard':
20618 actux1.c:92: warning: unused variable 'revision'
20621 actux2.c: In function 'checkboard':
20622 actux2.c:100: warning: unused variable 's'
20623 actux2.c:99: warning: unused variable 'revision'
20624 actux2.c: In function 'reset_phy':
20625 actux2.c:130: warning: unused variable 'i'
20628 actux3.c: In function 'checkboard':
20629 actux3.c:114: warning: unused variable 'revision'
20631 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20633 commit d5934ad7756f038a393a9cfab76a4fe306d9d930
20634 Author: Marian Balakowicz <m8@semihalf.com>
20635 Date: Mon Feb 4 08:28:09 2008 +0100
20637 [new uImage] Add dual format uImage support framework
20639 This patch adds framework for dual format images. Format detection is added
20640 and the bootm controll flow is updated to include cases for new FIT format
20643 When the legacy (image_header based) format is detected appropriate
20644 legacy specific handling is invoked. For the new (FIT based) format uImages
20645 dual boot framework has a minial support, that will only print out a
20646 corresponding debug messages. Implementation of the FIT specific handling will
20647 be added in following patches.
20649 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20651 commit b29661fc1151077776454288051bc9a488351ce8
20652 Author: Wolfgang Denk <wd@denx.de>
20653 Date: Sun Feb 24 15:21:36 2008 +0100
20655 Coding style cleanup. Prepare v1.3.2-rc2 release candidate
20657 Signed-off-by: Wolfgang Denk <wd@denx.de>
20659 commit 00b48a48424894daa589d166d73277830b1c6ac4
20660 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20661 Date: Sat Feb 23 12:15:56 2008 +0100
20663 ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selected
20665 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20667 commit b075d74efb70ff68c49a2532f26b56d6703b69c1
20668 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20669 Date: Sat Feb 23 17:24:16 2008 +0900
20671 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets.
20673 ----------------------------------------------------------------
20674 Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)]
20676 Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on
20679 GCC can be made to warn about usage of long long types with ISO C90
20680 (-ansi), but only with -pedantic. You can write this in a way that even
20681 then it doesn't cause warnings, namely by:
20684 __extension__ typedef __signed__ long long __s64;
20685 __extension__ typedef unsigned long long __u64;
20688 The __extension__ keyword in front of this switches off any pedantic
20689 warnings for this expression.
20691 Signed-off-by: Olaf Hering <olh@suse.de>
20692 Cc: <linux-arch@vger.kernel.org>
20693 Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
20694 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
20695 ----------------------------------------------------------------
20697 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20699 commit 208acd112e6517b21fc30c420396902b103563ac
20700 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20701 Date: Sat Feb 23 17:07:57 2008 +0900
20703 cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.
20705 This will reduce the build time.
20707 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20709 commit 495a0dde7fa1b14cdc15607d86503ec2bdcd02c4
20710 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20711 Date: Sat Feb 23 17:05:00 2008 +0900
20713 cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.
20715 This will reduce the build time.
20717 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20719 commit e682ba399a1d76f09d8cc7af1e57066f1d360d91
20720 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20721 Date: Sat Feb 23 16:58:41 2008 +0900
20723 cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.
20725 This reduces the build time by ~10%. Here's the gth2_config example.
20728 real 0m31.441s 0m27.833s
20729 user 0m24.766s 0m23.045s
20730 sys 0m10.425s 0m7.468s
20732 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
20734 commit 02409f8cf54c7cd91981f0dfec135dbf3858090c
20735 Author: Marcel Moolenaar <marcelm@juniper.net>
20736 Date: Fri Feb 22 10:48:07 2008 -0800
20738 make define2mk.sed work on FreeBSD
20740 In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link",
20741 the define2mk.sed script was identified as the source of the link
20742 failure on FreeBSD. The problem is that sed(1) does not always support
20743 the '+' operator. It isn't on FreeBSD. The attach patch implements the
20744 equivalent, using the '*' operator instead and should work everywhere.
20746 Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
20748 commit e5084af8ded58453cd07ec1af8b0f29f34122bbc
20749 Author: Detlev Zundel <dzu@denx.de>
20750 Date: Fri Feb 22 17:21:32 2008 +0100
20752 Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.
20754 The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove
20755 final traces of long-deprecated "ramdisk" kernel parm") makes these
20756 changes neccessary.
20758 Signed-off-by: Detlev Zundel <dzu@denx.de>
20760 commit d01b847c5cd070895c4ba178c85cd068a95cf7cd
20761 Author: Larry Johnson <lrj@acm.org>
20762 Date: Thu Feb 21 13:58:16 2008 -0500
20764 LM75 bug fix for negative temperatures
20766 When the LM75 temperature sensor measures a temperature below 0 C, the
20767 current driver does not perform sign extension, so the result returned is
20768 256 C too high. This patch fixes the problem.
20770 Signed-off-by: Larry Johnson <lrj@acm.org>
20772 commit 5a910c224b13e413bda41922379add6d75c32da3
20773 Author: Heiko Schocher <hs@denx.de>
20774 Date: Thu Feb 21 18:33:45 2008 +0100
20776 IDS8247: update MAINTAINER entry.
20778 Signed-off-by: Heiko Schocher <hs@denx.de>
20780 commit 79eac2bfb591f2b028ec1735049dc91e4320de4a
20781 Author: Heiko Schocher <hs@denx.de>
20782 Date: Thu Feb 21 18:31:15 2008 +0100
20784 Fix device tree for mgsuvd board.
20786 Rename the "scc" node in "ethernet" for the mgsuvd board.
20788 Signed-off-by: Heiko Schocher <hs@denx.de>
20790 commit 2e721094a70a52206af2e1bf1208d9a7131f6dad
20791 Author: Yuri Tikhonov <yur@emcraft.com>
20792 Date: Thu Feb 21 14:23:42 2008 +0100
20794 lwmon5: enable hardware watchdog
20796 Some boards (e.g. lwmon5) may use rather small watchdog intervals, so
20797 causing it to reboot the board if U-Boot does a long busy-wait with
20798 udelay(). Thus, for these boards we have to restart WD more
20801 This patch splits the busy-wait udelay() into smaller, predefined,
20802 intervals, so that the watchdog timer may be resetted with the
20803 configurable (CONFIG_WD_PERIOD) interval.
20805 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
20807 commit bc77881247ee6f95d7a9ebc499d26b96bae38c9d
20808 Author: Anatolij Gustschin <agust@denx.de>
20809 Date: Thu Feb 21 12:52:29 2008 +0100
20811 ppc4xx: Support for ATI Radeon 9200 card on sequoia
20813 Adds configuration option for ATI Radeon 9200 card
20814 support to sequoia config file. If CONFIG_VIDEO
20815 is enabled, TEXT_BASE should be changed to 0xFFF80000.
20817 Signed-off-by: Anatolij Gustschin <agust@denx.de>
20819 commit 5a9abcc317cf3c8a69559ff83081f4e5d719edb7
20820 Author: Kumar Gala <galak@kernel.crashing.org>
20821 Date: Mon Feb 18 08:18:07 2008 -0600
20823 Remove duplicate defines for ARRAY_SIZE
20825 A few duplicate of the ARRAY_SIZE macro sneaked in since we put
20826 the define in common.h.
20828 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20830 commit 81d93e5c4b83d8b6dcee69de6f4a14ccf6f7114a
20831 Author: Kumar Gala <galak@kernel.crashing.org>
20832 Date: Mon Feb 18 08:09:37 2008 -0600
20834 ppc: Allow boards to specify effective amount of memory
20836 For historical reasons we limited the stack to 256M because some boards
20837 could only map that much via BATS. However newer boards are capable of
20838 mapping more memory (for example 85xx is capable of doing up to 2G).
20840 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
20842 commit 755c35f54ba7eb7687aa7935e04a02a01ef1b27b
20843 Author: Mike Frysinger <vapier@gentoo.org>
20844 Date: Mon Feb 18 05:24:13 2008 -0500
20846 include autoconf.mk before any other .mk files
20848 This bumps the autoconf.mk include step above board/cpu/arch/etc... so that
20849 those .mk files can have make if statements based on the current config.
20851 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20853 commit 16fe77752eee099b9fb61ed73460e51cc94b37ba
20854 Author: Mike Frysinger <vapier@gentoo.org>
20855 Date: Mon Feb 18 05:10:07 2008 -0500
20857 error check autoconf.mk generation
20859 If any of the steps for generating autoconf.mk fail currently, they go
20860 unnoticed. To fix, we can simply add 'set -e' to the long list of commands.
20861 This is simpler and more robust than placing '|| exit $$?' after every line.
20863 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20865 commit 019895a8dee71a9f00da05c03e379f45d581b0fe
20866 Author: Stefano Babic <sbabic@denx.de>
20867 Date: Mon Feb 18 08:03:51 2008 +0100
20869 Fix bug in dependency checking
20871 By adding VERSION_FILE to the PHONY targets the script
20872 /tools/setlocalversion is always called and version_autogenerated.h
20873 is replaced only if the script find a modified source file.
20875 Signed-off-by: Stefano Babic <sbabic@denx.de>
20877 commit 98ba144ccc912eee90dd42699f023c497ce774c6
20878 Author: Kyungmin Park <kmpark@infradead.org>
20879 Date: Mon Feb 18 14:35:43 2008 +0900
20881 Fix GPMC CS2 memory setup at apollon
20883 It disables the current map first
20885 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
20887 commit e845e07e1e6e64f40e35688439d3cdcf01cfff4f
20888 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20889 Date: Sun Feb 17 23:52:46 2008 +0100
20891 uli526x: Fix multiple differ in signedness and parentheses around comparison
20893 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20895 commit beeccf7a5dc5415c202e0132a33c58fc316c2a62
20896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20897 Date: Sun Feb 17 16:58:04 2008 +0100
20899 MIPS: Fix CFG_NO_FLASH support
20901 - Fix flash_init call when CFG_NO_FLASH is used
20902 - Remove no more needed flash.c for qemu-mips
20904 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
20906 commit edfed1d91df2b2670a812ca9d1a1f9faae7dba47
20907 Author: Mike Frysinger <vapier@gentoo.org>
20908 Date: Sat Feb 16 02:40:18 2008 -0500
20910 easylogo: clean up some more and add -r (rgb) support
20912 Michael Hennerich added support for outputting an image in RGB format rather
20913 than forcing YUYV all the time. This makes obvious sense if the display you
20914 have takes RGB input rather than YUYV.
20916 Rather than hack in support for options, I've converted it to use getopt and
20917 cleaned up the argument parsing in the process.
20919 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
20920 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20922 commit f65c98129ccada3f7caf97d80395a95b84e911de
20923 Author: Mike Frysinger <vapier@gentoo.org>
20924 Date: Sat Feb 16 02:12:37 2008 -0500
20926 Makefile: add target for $(LDSCRIPT)
20928 If the $(LDSCRIPT) does not exist (normally it's board/$(BOARD)/u-boot.lds),
20929 then change into the board directory and try and create it. This allows you
20930 to generate the linker script on the fly based upon board defines (like the
20931 Blackfin boards do).
20933 There should be no regressions due to this change as the normal case is to
20934 already have a u-boot.lds file. If that's the case, then there's nothing to
20935 generate, and so make will always exit. The fix here is that if the linker
20936 script does not exist, the implicit rules take over and attempt to guess how
20937 to generate the file.
20939 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
20941 commit 5583cbf736474ef754e128a54fb78632f57b48fd
20942 Author: Marian Balakowicz <m8@semihalf.com>
20943 Date: Thu Feb 21 17:27:49 2008 +0100
20945 [new uImage] Fix erroneous use of image_get_magic() in fdc/usb cmds
20947 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20949 commit 2242f5369822bc7780db95c47985bb408ea9157b
20950 Author: Marian Balakowicz <m8@semihalf.com>
20951 Date: Thu Feb 21 17:27:41 2008 +0100
20953 [new uImage] Rename and move print_image_hdr() routine
20955 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20957 commit f50433d670ec2ee9e96abac67cdc6e5e061a810d
20958 Author: Marian Balakowicz <m8@semihalf.com>
20959 Date: Thu Feb 21 17:20:20 2008 +0100
20961 [new uImage] Add fit_parse_conf() and fit_parse_subimage() routines
20963 Introducing routines for parsing new uImage format bootm arguments:
20964 [<addr>]#<conf> - configuration specification
20965 [<addr>]:<subimg> - subimage specification
20967 New format images can contain multiple subimages of the same type. For example
20968 a single new format image file can contain three kernels, two ramdisks and a
20969 couple of FDT blobs. Subimage and configuration specifications are extensions
20970 to bootm (and other image-related commands) arguments' syntax that allow to
20971 specify which particular subimage should be operated on.
20973 Subimage specification is used to denote a particular subimage. Configurations
20974 are a bit more complex -- they are used to define a particualr booting setup,
20975 for example a (kernel, fdt blob) pair, or a (kernel, ramdisk, fdt blob) tuple,
20978 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20980 commit fff888a1997ff7de9b29e24050fc4a0fd403ba16
20981 Author: Marian Balakowicz <m8@semihalf.com>
20982 Date: Thu Feb 21 17:20:19 2008 +0100
20984 [new uImage] Add gen_get_image() routine
20986 This routine assures that image (whether legacy or FIT) is not
20987 in a special dataflash storage.
20989 If image address is a dataflash address image is moved to system RAM.
20991 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
20993 commit 75d3e8fbd93c14d9929d024c75af2d742c76db70
20994 Author: Marian Balakowicz <m8@semihalf.com>
20995 Date: Thu Feb 21 17:20:18 2008 +0100
20997 [new uImage] Pull in libfdt if CONFIG_FIT is enabled
20999 New uImage format (Flattened Image Tree) requires libfdt
21000 functionality, print out error message if CONFIG_OF_LIBFDT
21003 New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
21004 This commit turns it on by default.
21006 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21008 commit 1ba639da5604a64b3ed884a2cbb1c5414a9fa728
21009 Author: Michael Schwingen <michael@schwingen.org>
21010 Date: Mon Feb 18 23:16:35 2008 +0100
21012 CFI: Do not use uninitialized cmd_reset
21014 Do not use uninitialized cmd_reset; issue both AMD and Intel reset
21017 From a short test, it looks like AMD-style flash roms treat *any* unknown
21018 command write as a reset, at least when in CFI Query mode, so issuing the
21019 Intel reset command to AMD-style flashs seems safe (from the small sample I
21020 have), plus the 3-cycle magic sequence should kick the state machine into
21021 the right state even without a reset command. Since the AMD-style flashs
21022 require the unlock sequence for real operation, I chose to try the AMD reset
21023 command first, so that Intel flashs do no see an invalid command prior to
21026 I have tested the patch on AM29LV320-style flashs from Fujitsu and Macronix,
21027 plus Intel StrataFlash.
21029 Signed-off-by: Michael Schwingen <michael@schwingen.org>
21030 Signed-off-by: Stefan Roese <sr@denx.de>
21032 commit e7a85f26830c9f2e78506421c2d519a2965bc7a1
21033 Author: Rafal Jaworowski <raj@semihalf.com>
21034 Date: Thu Feb 21 11:56:44 2008 +0100
21036 API: Add (c) and licensing notice to the public API header.
21038 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
21040 commit 928d1d77f8623c120d8763e20e1ca58df9c5c4c6
21041 Author: Yuri Tikhonov <yur@emcraft.com>
21042 Date: Thu Feb 21 11:06:07 2008 +0100
21044 Fix CPU POST test failure
21046 The CPU POST test code (run from cpu_post_exec_31()) doesn't follow the
21047 ABI carefully, at least the CR3, CR4, and CR5 fields of CR are clobbered
21048 by it. The gcc-4.2 with its more aggressive optimization exposes this fact.
21049 This patch just saves the CR value before running the test code, so allowing
21050 it to do anything it wants with CR.
21052 Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
21053 Acked-by: Yuri Tikhonov <yur@emcraft.com>
21056 commit d5908b093955415f3d340706378b991f911af671
21057 Author: Jon Loeliger <jdl@freescale.com>
21058 Date: Wed Feb 20 15:26:51 2008 -0600
21060 8610HPCD: Document the flashbank selection switches.
21062 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21064 commit a551cee99ad1d1da20fd23ad265de47448852f56
21065 Author: Jon Loeliger <jdl@freescale.com>
21066 Date: Wed Feb 20 14:22:26 2008 -0600
21068 86xx: Fix GUR PCI config registers properly.
21070 Back in commit 975a083a5ef785c414b35f9c5b8ae25b26b41524 where
21071 I tried to "8610HPCD: Fix typos in two PCI setup registers", I
21072 botched it due to not realizing that 8610 and 8641 had different
21073 Global Utility Register defintions, one of which was like 85xx,
21074 and the other wasn't. Correct this problem by introducing two
21075 symbols, one for each 86xx SoC, but neither of which is named
21076 anything like 85xx.
21078 My bad. Lovely Wednesday with git bisect. You know.
21080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21082 commit cb06eb961bdffc8728b38c242473d802e83ab2b4
21083 Author: Jon Loeliger <jdl@freescale.com>
21084 Date: Wed Feb 20 12:24:11 2008 -0600
21086 8610HPCD: Don't use VIDEO/CFB_CONSOLE by default.
21088 Without an actual supported video card hooked up, enabling
21089 the CONFIG_VIDEO by default just makes it look broken by
21090 routing all console output to the video card. Don't.
21092 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21094 commit 4d264eff4312f230776b913edade7ceb75f1b1e0
21095 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21096 Date: Wed Jan 30 15:08:15 2008 -0600
21098 ColdFire: Fix missing code flash size for M5485EVB
21100 Signed-off-by: James Mahan <kmahan@freescale.com>
21101 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21103 commit c54f9263e4e11e34b1e70c160bc467ef1d8ec59d
21104 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
21105 Date: Wed Jan 30 15:04:42 2008 -0600
21107 ColdFire: Fix 5282 and 5271 interrupt mask bit
21109 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
21111 commit 975a083a5ef785c414b35f9c5b8ae25b26b41524
21112 Author: Jon Loeliger <jdl@freescale.com>
21113 Date: Tue Feb 19 12:31:08 2008 -0600
21115 8610HPCD: Fix typos in two PCI setup registers.
21117 The two symbols MPC86xx_PORDEVSR_IO_SEL and MPC86xx_PORBMSR_HA
21118 were erroneously present as 85xx names and values, leftover from
21119 the clone wars. Fix this by removing the 85xx cruft from the
21122 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21124 commit 13f5433f700d4da9f6fdf2a4bb80310133a7c170
21125 Author: Jon Loeliger <jdl@freescale.com>
21126 Date: Mon Feb 18 14:01:56 2008 -0600
21128 86xx: Convert sbc8641d to use libfdt.
21130 This is the proper fix for a missing closing brace in the function
21131 ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
21132 The ft_cpu_setup() function in mpc8641hpcn.c should have been
21133 removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
21134 but was missed. Only, the sbc8641d was nominally still using it.
21135 It all got ripped out, and the funcality that was in ft_board_setup()
21136 was refactored to remove the CPU portions into the new file
21137 cpu/mpc86xx/fdt.c instead. Make sbc8641d use this now.
21139 Based loosely on an original patch from joe.hamman@embeddedspecialties.com
21141 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21143 commit 04efddc87c50c84f85dad5c331c634a6ce830a83
21144 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21145 Date: Sun Feb 17 23:35:31 2008 +0100
21147 mpc86xx: Fix unused variable 'config' and 'immap'
21149 and remove useless CONFIG_DDR_INTERLEAVE
21151 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21153 commit 83d1b3876695c4f21faff2b731d9ef83f38ed208
21154 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21155 Date: Sun Feb 17 23:03:36 2008 +0100
21157 mpc86xx: Fix implicit declaration of functions 'init_laws' and 'disable_law'
21159 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21161 commit b6f29c84c208a091f95a10cbc9852d729659ba20
21162 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21163 Date: Sun Feb 17 14:15:31 2008 +0100
21165 s3c24x0: Fix unused variable 'i' in function 'serial_init_dev'
21167 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21169 commit 0937b8d869fdb42d6ad4fe312958639bd62c973f
21170 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21171 Date: Sun Feb 17 14:15:32 2008 +0100
21173 pxa: fix assignment from incompatible pointer type
21175 fix mmc_bread function prototype
21177 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21179 commit 64d792063fff90b8118179b092feee09fe5cae13
21180 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21181 Date: Sun Feb 17 14:15:30 2008 +0100
21183 at91cap9adk: fix implicit declaration of function 'eth_init'
21185 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21187 commit 375c4353db8f900f7ec772e26fab116ec00f7d3a
21188 Author: Wolfgang Denk <wd@denx.de>
21189 Date: Sun Feb 17 15:43:44 2008 +0100
21191 Remove files added by mistake, update CHANGELOG.
21193 Signed-off-by: Wolfgang Denk <wd@denx.de>
21195 commit b738654d3c84a30f2bfd9a8d7652ff20807c890c
21196 Author: Mike Nuss <mike@terascala.com>
21197 Date: Wed Feb 6 11:10:11 2008 -0500
21199 PPC440EPx: Optionally enable second I2C bus
21201 The option CONFIG_I2C_MULTI_BUS does not have any effect on Sequoia, the
21202 PPC440EPx reference platform, because IIC1 is never enabled. Add Sequoia board
21203 code to turn on IIC1 if CONFIG_I2C_MULTI_BUS is selected.
21205 Signed-off-by: Mike Nuss <mike@terascala.com>
21206 Cc: Stefan Roese <sr@denx.de>
21208 commit ef5b4f221c22d05770878513951745f236b5b43f
21209 Author: Niklaus Giger <niklaus.giger@netstal.com>
21210 Date: Tue Feb 5 10:26:44 2008 +0100
21212 ppc4xx: HCU4/5. Cleanup configs
21214 - hcu4.h: Removed define of CONFIG_PPC405GPr
21215 - Corrected phy addresses
21216 - Fix boot variables
21217 - Respect line length of 80 chars
21219 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21221 commit 74973126d1be63ac75bdc192f46234dca3a7c421
21222 Author: Niklaus Giger <niklaus.giger@netstal.com>
21223 Date: Tue Feb 5 11:31:28 2008 +0100
21225 ppc4xx: HCU4/5. Cleanups
21227 - Fix some coding style violations.
21228 - Use in/out_u16/32 where appropriate.
21229 - Use register names from ppc405.h.
21230 - Fix trace useage for Lauterbach.
21231 - Remove obsolete generation HCU2.
21232 - Renamed fixed_hcu4_sdram to init_ppc405_sdram.
21234 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21236 commit 8cc10d06b833ed917a19ad358c8ebbed8bc19555
21237 Author: Niklaus Giger <niklaus.giger@netstal.com>
21238 Date: Tue Feb 5 10:26:41 2008 +0100
21240 ppc4xx: PPC405GPr fix missing register definitions
21242 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21244 commit 214398d9cb22268d9d4f7563359edca0f78297a2
21245 Author: Larry Johnson <lrj@acm.org>
21246 Date: Fri Jan 18 21:49:05 2008 -0500
21248 ppc4xx: Beautify configuration files for Sequoia and Korat boards
21250 Signed-off-by: Larry Johnson <lrj@acm.org>
21252 commit 30c6a241e88499f536e86d325759e29ba00ff67f
21253 Author: Anatolij Gustschin <agust@denx.de>
21254 Date: Fri Feb 15 20:09:01 2008 +0100
21256 Wipe out assembler warnings while compiling x86 biosemu
21258 This patch tries to get rid of some assembler warnings about
21259 changed .got2 section type while compiling x86 bios emulator
21262 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21264 commit 67a4389e39ad853d65b72e2b7cad15c7e8291147
21265 Author: Wolfgang Denk <wd@denx.de>
21266 Date: Fri Feb 15 00:57:09 2008 +0100
21268 Prepare v1.3.2-rc1 release candidate
21270 commit f33e9653c9c09868995d788511d573771c209fe5
21271 Author: Anatolij Gustschin <agust@denx.de>
21272 Date: Fri Feb 15 00:13:20 2008 +0100
21274 Fix compile warning on lib_ppc/board.c
21276 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21278 commit e5c6f9f8bec4dff9603419161e3a15cc8ad5d5f4
21279 Author: Anatolij Gustschin <agust@denx.de>
21280 Date: Thu Feb 14 18:22:04 2008 +0100
21282 Add Radeon Mobility 9200 pci device id to the radeon driver
21284 This patch extends PCI device id table of the
21285 radeon driver so that the driver will also support
21286 Radeon Mobility 9200 (M9+) based boards.
21288 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21290 commit 1b8607e1f7143548c6062c28371449ec69588c00
21291 Author: Anatolij Gustschin <agust@denx.de>
21292 Date: Thu Feb 14 18:19:50 2008 +0100
21294 Extend ATI Radeon driver to support more video modes
21296 Adds ATI Radeon 9200 support for 1280x1024, 1024x768,
21297 800x600, 640x480 at 24, 16 and 8 bpp.
21299 Signed-off-by: Anatolij Gustschin <agust@denx.de>
21301 commit 4124382de029d361162a4b8cecc773eb8f26e2a8
21302 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21303 Date: Sun Feb 10 17:05:20 2008 +0100
21305 xsengine: fix typo and few coding style
21307 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21309 commit 6f4abee789b6d9be3ec4b97ad48f509355559e9e
21310 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21311 Date: Fri Feb 8 21:25:58 2008 +0100
21313 Fix wrong memory limit calculation in memory-test
21315 If the length of the memory address range passed to the "mtest" command is
21316 not of the form 2^x - 1, not all address lines are tested. This bug is
21317 inherited from the original software at
21318 http://www.netrino.com/Embedded-Systems/How-To/Memory-Test-Suite-C. Fix
21321 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21323 commit 7e30f5eac7f07082a7ca77b7d91b944a8d0af6db
21324 Author: Wolfgang Denk <wd@denx.de>
21325 Date: Fri Feb 15 00:11:39 2008 +0100
21327 Coding STyle cleanup.
21329 Signed-off-by: Wolfgang Denk <wd@denx.de>
21331 commit f6921e3dc331293c873ec4d109fd5517a42a90b3
21332 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21333 Date: Tue Feb 5 13:30:43 2008 +0900
21335 sh: Fix register address of SH7722
21337 The address of SH7722 is wrong by old document.
21338 This patch fixes this problem.
21340 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
21342 commit 0ec7a061fb1c277f6afd73d61dd71bd21e7ef7b2
21343 Author: Mike Frysinger <vapier@gentoo.org>
21344 Date: Mon Feb 4 17:44:23 2008 -0500
21346 only update version header as needed
21348 Constantly rebuilding the version header will force useless relinking, so we
21349 simply need to compare the new header with the existing one before updating
21352 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21354 commit 208447f8e953f347425eb92c8e28d59e6d911363
21355 Author: Mike Frysinger <vapier@gentoo.org>
21356 Date: Mon Jan 28 05:56:19 2008 -0500
21358 Do not specify a CROSS_COMPILE default when executing size
21360 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21362 commit 1f780aa6f17a5d79791d69ec1d2f66d76ac45d8e
21363 Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21364 Date: Wed Feb 13 11:19:19 2008 +0100
21366 Fix return value of mtest when CFG_ALT_MEMTEST set
21368 Fix a missing return statement from a non-void function.
21370 Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
21372 commit 943afa229cf5bf70ef917c7eb6bd0db59a1ba602
21373 Author: Timur Tabi <timur@freescale.com>
21374 Date: Wed Jan 9 14:35:26 2008 -0600
21376 85xx, 86xx: Determine I2C clock frequencies and store in global_data
21378 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
21380 Update the get_clocks() function in 85xx and 86xx to determine the I2C
21381 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
21383 Signed-off-by: Timur Tabi <timur@freescale.com>
21385 commit b931b3a9c3bdfaaeaa71e57a6026eec726005b08
21386 Author: Wolfgang Denk <wd@denx.de>
21387 Date: Thu Feb 14 23:18:01 2008 +0100
21389 TQM834x: clean up configuration
21391 Get board name consistent with Linux and elsewhere;
21392 get rid of local network definitions etc.
21394 Signed-off-by: Wolfgang Denk <wd@denx.de>
21396 commit 38cc09c55b1d7f233789052c6fc462e5377669a9
21397 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21398 Date: Thu Feb 14 08:02:12 2008 +0100
21400 TFTP: fix search of ':' in BootFile
21402 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21404 commit 0bc9efada170096c6b273f19165e32936d330d80
21405 Author: Wolfgang Denk <wd@denx.de>
21406 Date: Thu Feb 14 22:46:55 2008 +0100
21408 Coding style cleanup; update CHANGELOG.
21410 Signed-off-by: Wolfgang Denk <wd@denx.de>
21412 commit e7670f6c1e52ae6d2a43ff75a8bcfa7a5c86e47b
21413 Author: Wolfgang Denk <wd@denx.de>
21414 Date: Thu Feb 14 22:43:22 2008 +0100
21416 PPC: Use r2 instead of r29 as global data pointer
21418 R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
21419 will refuse to use load/store multiple insns; instead, it issues a
21420 list of simple load/store instructions upon function entry and exit,
21421 resulting in bigger code size, which in turn makes the build for a
21426 Signed-off-by: Wolfgang Denk <wd@denx.de>
21428 commit 3c234efa693bc59906c2be55c7918ecbb55392ea
21429 Author: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
21430 Date: Wed Jan 30 09:08:49 2008 +0100
21432 ARM: make the machid configurable via the environment
21434 If the variable "machid" exists, let do_bootm_linux use that instead
21435 of bd->bi_arch_number.
21437 Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
21439 commit dd24058407c5add45cc60aec6c757ddc1a17e1b0
21440 Author: Vlad Lungu <vlad@comsys.ro>
21441 Date: Wed Jan 23 16:34:46 2008 +0200
21443 Use #ifdef CONFIG_FSLDMAFEC
21445 MCD_tasks.c lacks [subject] so compilation of mips targets (and more, probably)
21448 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
21450 commit 26c7bab81e08dc7bd696c48f753428a829629bd8
21451 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
21452 Date: Sat Jan 19 10:25:59 2008 +0900
21454 common/miiphyutil.c: Cleanup MII_DEBUG and debug()
21456 Current MII_DEBUG is confusing in two ways. One is useless define-then-
21457 undef at the top of the file. The other is there is only one debug() in
21458 this file, and that doesn't seem worthwhile to bother having MII_DEBUG.
21459 While there are many useful printf()/puts() debug codes, but they are for
21460 DEBUG, not for MII_DEBUG.
21462 This patch tries to put them all together into MII_DEBUG and debug().
21464 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
21466 commit 751b9b5189f3274b03c809172631316d6b002c82
21467 Author: Kyungmin Park <kmpark@infradead.org>
21468 Date: Thu Jan 17 16:43:25 2008 +0900
21470 OneNAND Initial Program Loader (IPL) support
21472 This patch enables the OneNAND boot within U-Boot.
21473 Before this work, we used another OneNAND IPL called X-Loader based
21474 on open source. With this work, we can build the oneboot.bin image
21475 without other program.
21477 The build sequence is simple.
21478 First, it compiles the u-boot.bin
21479 Second, it compiles OneNAND IPL
21480 Finally, it becomes the oneboot.bin from OneNAND IPL and u-boot.bin
21481 The mechanism is similar with NAND boot except it boots from itself.
21483 Another thing is that you can only use the OneNAND IPL only to work
21484 other bootloader such as RedBoot and so on.
21486 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
21488 commit 21f6f9636f0e978397548751347425fbf8d42bb3
21489 Author: Andy Fleming <afleming@freescale.com>
21490 Date: Wed Jan 16 13:06:59 2008 -0600
21492 Fix CONFIG_MMC usage in fat code
21494 A #if statement in fat.c depended on CONFIG_MMC, instead of
21495 defined(CONFIG_MMC). This meant CONFIG_MMC needed to be defined
21496 as "1" rather than just defined. Now it's better.
21498 Signed-off-by: Andy Fleming <afleming@freescale.com>
21500 commit f57d7d364ce189e39b0a64338d2f8012c074a2bd
21501 Author: Rafal Jaworowski <raj@semihalf.com>
21502 Date: Tue Jan 15 12:52:31 2008 +0100
21504 ppc: Refactor cache routines, so there is only one common set.
21506 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
21508 commit 3f2ac8f928c76cbd2374437b2d079f8b4324aaba
21509 Author: Jon Loeliger <jdl@jdl.com>
21510 Date: Wed Jan 23 15:55:02 2008 -0600
21512 86xx: Fix compilation warning in sys_eprom.c
21514 sys_eeprom.c:82:9: warning: unknown escape sequence '\/'
21516 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21518 commit 65230107025733e89e28fd5e5cfd916d4953c28a
21519 Author: Haavard Skinnemoen <hskinnemoen at>
21520 Date: Fri Feb 22 11:40:50 2008 +0000
21522 Move AT91RM9200DK board support under board/atmel
21524 We already have a vendor subdir for Atmel, so we should use it.
21526 Signed-off-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
21528 commit 6d0943a6be99977d6d853d51749e9963d68eb192
21529 Author: Andreas Engel <andreas.engel@ericsson.com>
21530 Date: Mon Jan 14 09:06:52 2008 +0000
21532 ARM: cleanup duplicated exception handlingcode
21534 Move duplicated exception handling code into lib_arm.
21536 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
21538 commit ea8d989f4ef8203e1c0291e62435a8c62e3cfb29
21539 Author: Timo Tuunainen <timo.tuunainen@sysart.fi>
21540 Date: Fri Feb 1 10:09:03 2008 +0000
21542 Support for Artila M-501 starter kit
21544 Kimmo Leppala / Sysart and
21545 Timo Tuunainen / Sysart
21547 commit 9604b6e53ddae4fe00a488cbcd6b0e6cb344bccc
21548 Author: Stelian Pop <stelian@popies.net>
21549 Date: Mon Feb 11 10:50:19 2008 +0000
21553 ---------------------------------
21555 read_dataflash() takes a signed char pointer as a parameter. Silence a
21556 few warnings dues to incorrect parameter types in env_dataflash.c.
21558 Signed-off-by: Stelian Pop <stelian@popies.net>
21560 commit 64e8a06af68cda174a8a06d0a61fce5e5bb189d7
21561 Author: Stelian Pop <stelian@popies.net>
21562 Date: Thu Feb 7 09:42:57 2008 +0000
21564 AT91CAP9 support : move board files to Atmel vendor directory.
21566 AT91CAP9 support : move at91cap9adk board files to Atmel vendor directory.
21568 Signed-off-by: Stelian Pop <stelian@popies.net>
21570 commit 7263ef191b87da94768f762c7093bedeb70db98f
21571 Author: Stelian Pop <stelian at>
21572 Date: Thu Jan 3 21:15:56 2008 +0000
21574 AT91CAP9 support : MACB changes
21576 Signed-off-by: Stelian Pop <stelian <at> popies.net>
21577 Acked-by: Haavard Skinnemoen <hskinnemoen <at> atmel.com>
21579 commit 6afcabf11d7321850f4feaadfee841488ace54c5
21580 Author: Stelian Pop <stelian@popies.net>
21581 Date: Thu Feb 7 16:37:54 2008 +0000
21583 AT91CAP9 support : board/ files
21585 Signed-off-by: Stelian Pop <stelian@popies.net>
21587 commit fefb6c10928caa9e71335cad64dcb65c83fce8ab
21588 Author: Stelian Pop <stelian at>
21589 Date: Wed Jan 30 21:15:54 2008 +0000
21591 AT91CAP9 support : cpu/ files
21593 Signed-off-by: Stelian Pop <stelian <at> popies.net>
21595 commit fa506a926cec348805143576c941f8e61b333cc0
21596 Author: Stelian Pop <stelian@popies.net>
21597 Date: Thu Jan 31 21:15:53 2008 +0000
21599 AT91CAP9 support : include/ files
21601 Signed-off-by: Stelian Pop <stelian@popies.net>
21603 commit 20b197c6f2799af399a68f96a1aff543a75621b8
21604 Author: Stelian Pop <stelian@popies.net>
21605 Date: Sun Jan 20 19:49:21 2008 +0000
21607 AT91CAP9 support : build integration
21609 Signed-off-by: Stelian Pop <stelian@popies.net>
21611 commit d49fe4bed5b69ec910909d1bd62da23ecd8801fd
21612 Author: Stelian Pop <stelian@popies.net>
21613 Date: Sun Jan 20 21:07:00 2008 +0000
21615 Improve DataFlash CS definition.
21617 Use a structure instead of the error prone unnamed array to
21618 define the possible dataflash banks.
21620 Signed-off-by: Stelian Pop <stelian@popies.net>
21622 commit a6cdd21b56014208706238712a853a9e9a0a2290
21623 Author: Stelian Pop <stelian@popies.net>
21624 Date: Sat Jan 19 21:09:35 2008 +0000
21626 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on
21628 Fix arm926ejs compile when SKIP_LOWLEVEL_INIT is on.
21630 cpu/arm926ejs/start.o: In function `cpu_init_crit':
21631 .../cpu/arm926ejs/start.S:227: undefined reference to `lowlevel_init'
21633 Signed-off-by: Stelian Pop <stelian@popies.net>
21635 commit ea686f52e45b3df2938866d3f5a98bb2556dfe2b
21636 Author: Peter Pearse <peter.pearse@arm.com>
21637 Date: Fri Feb 1 16:50:24 2008 +0000
21639 Fix timer overflow in DaVinci
21640 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
21642 commit f4e7cbfcb0fcbc325a2bcfea7e00e3dd37f93846
21643 Author: Peter Pearse <peter.pearse@arm.com>
21644 Date: Fri Feb 1 16:49:08 2008 +0000
21646 Update board NetStar
21647 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
21649 commit b7f6193e76651e1fd606e46eb11915b53cb6618b
21650 Author: Niklaus Giger <niklaus.giger@netstal.com>
21651 Date: Tue Feb 5 10:26:42 2008 +0100
21653 ppc4xx: HCU4/5. Fix make O=../xx
21655 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21657 commit 29e3500cbc43c89eff6e720ca83e375deeecd9b3
21658 Author: Larry Johnson <lrj@acm.org>
21659 Date: Tue Jan 22 08:51:59 2008 -0500
21661 ppc4xx: Add CONFIG_4xx_DCACHE compile switch to Denali-core SPD code
21663 Signed-off-by: Larry Johnson <lrj@acm.org>
21665 commit fe891ecf4d187e9d11dde869ed4623af52b54451
21666 Author: Hiroshi Ito <ito@mlb.co.jp>
21667 Date: Thu Jan 31 18:35:04 2008 +0900
21669 NFS Timeout with large files.
21671 Retry to send NFS packet before reaching timeout.
21673 Signed-off-by: Hiroshi Ito <ito@mlb.co.jp>
21675 commit 88f72527f5b89c0905ad5c36cc2ef8d29dd6bbf0
21676 Author: Johannes Stezenbach <js@sig21.net>
21677 Date: Tue Jan 29 00:11:25 2008 +0100
21679 Add dependencies to avoid race conditions with parallel make.
21681 Signed-off-by: Johannes Stezenbach <js@sig21.net>
21683 commit 6d1b6f9f89c815eaca44acff8e73ece7181f61b6
21684 Author: Mike Frysinger <vapier@gentoo.org>
21685 Date: Mon Jan 28 05:46:01 2008 -0500
21687 Mark board_init_[fr] as noreturn
21689 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21691 commit 161b2af4d7b48fd602ce333c355a4df0337892bb
21692 Author: Mike Frysinger <vapier@gentoo.org>
21693 Date: Mon Jan 28 05:28:50 2008 -0500
21695 Only use TEXT_BASE if defined by the board
21697 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
21699 commit 1b769881750030f10743808b9d6013e11f559350
21700 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21701 Date: Fri Jan 25 07:54:47 2008 +0100
21703 Fix remaining CONFIG_COMMANDS
21708 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
21710 commit 0c9d42e6b0b83d507335a291e3ea99240038f4b9
21711 Author: Niklaus Giger <niklaus.giger@netstal.com>
21712 Date: Mon Jan 21 16:46:00 2008 +0100
21714 Add *~ to .gitignore
21716 One should never add a backup file ending in with ~ to the git repository.
21718 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
21720 commit 3cfb0c51b2bb5ede54eca85ace5b1ba12be314b0
21721 Author: Kumar Gala <galak@kernel.crashing.org>
21722 Date: Thu Jan 17 00:02:10 2008 -0600
21724 Remove duplicate defines for ARRAY_SIZE
21726 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21728 commit c77ce474b1c57b13e9d36d9830f147966c143694
21729 Author: Stelian Pop <stelian@popies.net>
21730 Date: Mon Jan 14 22:08:14 2008 +0100
21732 Fix incorrect address test in AT91F_DataflashSelect().
21734 Signed-off-by: Stelian Pop <stelian@popies.net>
21736 commit d9ad115bbf7bb0842de7dbd2502b7e430f83cc3d
21737 Author: Kumar Gala <galak@kernel.crashing.org>
21738 Date: Wed Feb 13 15:09:58 2008 -0600
21740 Fix building of fdt_support.c if DEBUG set
21742 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21744 commit ccd6e1464e5396bc1a9aebf7077ddf4342eafe03
21745 Author: Jon Loeliger <jdl@freescale.com>
21746 Date: Tue Feb 12 14:53:28 2008 -0600
21748 Add CFG_MPC86xx_DDR_ADDR and CFG_MPC86xx_DDR2_ADDR symbols
21750 These replace direct structure references for IMMR sections.
21752 Signed-off-by: Jon Loeliger <jdl@freescale.com>
21754 commit c62776be8dca4097ca03d4f9415f08d4887b45d0
21755 Author: Wolfgang Denk <wd@denx.de>
21756 Date: Tue Feb 12 00:45:06 2008 +0100
21758 Get rid of "#undef DEBUG" from board config files.
21760 Signed-off-by: Wolfgang Denk <wd@denx.de>
21762 commit 73bf1e2de7862bcdbd5a9f993b3e84b67c8ea9c8
21763 Author: Timur Tabi <timur@freescale.com>
21764 Date: Tue Jan 15 17:09:41 2008 -0600
21766 Remove #undef DEBUG from MPC83xx board header files
21768 Remove the "#undef DEBUG" line from all Freescale 83xx board header files.
21769 The inclusion of this line makes it impossible to enable debug code in
21770 other source files, because "#define DEBUG" typically needs to be defined
21771 before any header files are included.
21773 Signed-off-by: Timur Tabi <timur@freescale.com>
21775 commit 69018ce2e086e9caf35b914d675b82bc4888f077
21776 Author: Kumar Gala <galak@kernel.crashing.org>
21777 Date: Thu Jan 17 08:25:45 2008 -0600
21779 QE: Move FDT support into a common file
21781 Move the flat device tree setup for QE related devices into
21782 a common file shared between 83xx & 85xx platforms that have QE's.
21784 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
21786 commit 5cf746c303710329f8040d9c62ee354313e3e91f
21787 Author: Marian Balakowicz <m8@semihalf.com>
21788 Date: Thu Jan 31 13:59:09 2008 +0100
21790 [new uImage] Move kernel data find code to get_kernel() routine
21792 Verification of the kernel image (in old format) and finding kernel
21793 data is moved to a dedicated routine. The routine will also hold
21794 support for, to be added, new image format.
21796 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21798 commit 7b325454fd231d4273de3fe373850f777fb086bf
21799 Author: Marian Balakowicz <m8@semihalf.com>
21800 Date: Thu Jan 31 13:58:20 2008 +0100
21802 [new uImage] Cleanup FDT handling in PPC do_boot_linux()
21804 Move FDT blob finding and relocation to a dedicated
21805 get_fdt() routine. It increases code readability and
21806 will make adding support for new uImage format easier.
21808 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21810 commit b6b0fe6460b7063ac60b9a3531ef210aedb31451
21811 Author: Marian Balakowicz <m8@semihalf.com>
21812 Date: Thu Jan 31 13:58:13 2008 +0100
21814 [new uImage] Cleanup do_botm_linux() boot allocations
21816 This patch moves common pre-boot allocation steps shared between PPC
21817 and M68K to a helper routines:
21820 - get_boot_sp_limit()
21821 - get_boot_cmline()
21825 - set_clocks_in_mhz()
21827 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21829 commit ceaed2b1e54ebf14d600e02fef016c8df5cc4d40
21830 Author: Marian Balakowicz <m8@semihalf.com>
21831 Date: Thu Jan 31 13:57:17 2008 +0100
21833 [new uImage] Move ramdisk loading to a common routine
21835 Ramdisk loading code, including initrd_high variable handling,
21836 was duplicated for PPC and M68K platforms. This patch creates
21837 common helper routine that is being called from both platform
21838 do_bootm_linux() routines.
21840 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21842 commit 68d4f05e6b2383a442fb71f80f2a9fbb3d8def68
21843 Author: Marian Balakowicz <m8@semihalf.com>
21844 Date: Thu Jan 31 13:55:53 2008 +0100
21846 [new uImage] Removed dead ramdisk code on microblaze architectures
21848 Microblaze do_bootm_linux() includes ramdisk processing code but
21849 the ramdisk does not get used anywhere later on.
21851 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21853 commit 5ad03eb3854c162684222a718b44c0716ea0db03
21854 Author: Marian Balakowicz <m8@semihalf.com>
21855 Date: Thu Jan 31 13:55:39 2008 +0100
21857 [new uImage] Factor out common image_get_ramdisk() routine
21859 Architecture specific do_bootm_linux() routines share common
21860 ramdisk image processing code. Move this code to a common
21863 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21865 commit d3c5eb6dd1f4ed3c3388386cf1d1bf82aa51d56b
21866 Author: Marian Balakowicz <m8@semihalf.com>
21867 Date: Thu Jan 31 13:20:08 2008 +0100
21869 [new uImage] Move FDT error printing to common fdt_error() routine
21871 FDT error handling in PPC do_bootm_linux() shares the same message format.
21872 This patch moves error message printing to a helper fdt_error() routine.
21874 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21875 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
21877 commit 42b73e8ee00d48004791dea64b8093fb974c57e1
21878 Author: Marian Balakowicz <m8@semihalf.com>
21879 Date: Thu Jan 31 13:20:07 2008 +0100
21881 [new uImage] Factor out common routines for getting os/arch/type/comp names
21883 Move numeric-id to name translation for image os/arch/type/comp header
21884 fields to a helper routines: image_get_os_name(), image_get_arch_name(),
21885 image_get_type_name(), image_get_comp_name().
21887 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21889 commit e99c26694a384221d336f6448c06a57479c0baa4
21890 Author: Marian Balakowicz <m8@semihalf.com>
21891 Date: Thu Jan 31 13:20:07 2008 +0100
21893 [new uImage] Remove standalone applications handling from boootm
21895 Standalone applications are supposed to be run using the "go" command.
21896 This patch removes standalone images handling from the do_bootm().
21898 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21900 commit 4a2ad5ff6400698433dd7203d34939c3c9cc9bff
21901 Author: Marian Balakowicz <m8@semihalf.com>
21902 Date: Thu Jan 31 13:20:07 2008 +0100
21904 [new uImage] Remove OF_FLAT_TREE support from PPC bootm code
21906 Support for OF_FLAT_TREE is to be obsoleted in the near future,
21907 remove related code from the bootm routines.
21909 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21911 commit 82850f3d32a2661868ec6876bed7a22c55cef718
21912 Author: Marian Balakowicz <m8@semihalf.com>
21913 Date: Thu Jan 31 13:20:06 2008 +0100
21915 [new uImage] Use image API in SH do_bootm_linux() routine
21917 Introduce image handling API for lately added Hitachi SH architecture.
21919 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21921 commit 4a995edec1ac163d9326d143ffe2b47e7543407f
21922 Author: Marian Balakowicz <m8@semihalf.com>
21923 Date: Thu Jan 31 13:20:06 2008 +0100
21925 [new uImage] Rename architecture specific bootm code files
21927 Implementation of the do_bootm_linux() and other bootm helper routines is
21928 architecture specific code. As such it resides in lib_<arch> directories
21929 in files named <arch>_linux.c
21931 This patch renames those files to a more clear and accurate
21932 lib_<arch>/bootm.c form.
21934 List of the renamed files:
21935 lib_arm/armlinux.c -> lib_arm/bootm.c
21936 lib_avr32/avr32_linux.c -> lib_avr32/bootm.c
21937 lib_blackfin/bf533_linux.c -> lib_blackfin/bootm.c
21938 lib_i386/i386_linux.c -> lib_i386/bootm.c
21939 lib_m68k/m68k_linux.c -> lib_m68k/bootm.c
21940 lib_microblaze/microblaze_linux.c -> lib_microblaze/bootm.c
21941 lib_mips/mips_linux.c -> lib_mips/bootm.c
21942 lib_nios/nios_linux.c -> lib_nios/bootm.c
21943 lib_nios2/nios_linux.c -> lib_nios2/bootm.c
21944 lib_ppc/ppc_linux.c -> lib_ppc/bootm.c
21945 lib_sh/sh_linux.c -> lib_sh/bootm.c
21947 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21949 commit 7582438c285bf0cef82909d0f232de64ec567a8a
21950 Author: Marian Balakowicz <m8@semihalf.com>
21951 Date: Thu Jan 31 13:20:06 2008 +0100
21953 [new uImage] Return error on image move/uncompress overwrites
21955 Check for overwrites during image move/uncompress, return with error
21956 when the original image gets corrupted. Report clear message to the user
21957 and prevent further troubles when pointer to the corrupted images is passed
21958 to do_bootm_linux routine.
21960 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21962 commit f13e7b2e993c61fed1f607962501e051940d6e80
21963 Author: Marian Balakowicz <m8@semihalf.com>
21964 Date: Tue Jan 8 18:12:17 2008 +0100
21966 [new uImage] Cleanup image header pointer use in bootm code
21968 - use single image header pointer instead of a set of auxilliary variables.
21969 - add multi component image helper routines: get component size/data address
21971 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21973 commit 1ee1180b6e93e56d0282ac8d943e448e9d0eab20
21974 Author: Marian Balakowicz <m8@semihalf.com>
21975 Date: Tue Jan 8 18:17:10 2008 +0100
21977 [new uImage] Cleanup cmd_bootm.c
21979 - sort and cleanup headers, declarations, etc.
21980 - group related routines
21981 - cleanup indentation, white spaces
21983 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21985 commit af13cdbc01eaf88880978bfb4f603e012818ba24
21986 Author: Marian Balakowicz <m8@semihalf.com>
21987 Date: Tue Jan 8 18:11:45 2008 +0100
21989 [new uImage] Add memmove_wd() common routine
21991 Move common, watchdog sensible memmove code to a helper memmmove_wd() routine.
21993 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
21995 commit 958fc48abddeab513ea4847e34f22a2e9fe67fe1
21996 Author: Marian Balakowicz <m8@semihalf.com>
21997 Date: Tue Jan 8 18:11:44 2008 +0100
21999 [new uImage] Fix FDT header verification in PPC do_boot_linux() routine
22001 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22003 commit 15158971f49255ccef54f0979a942cfd3de2ae52
22004 Author: Marian Balakowicz <m8@semihalf.com>
22005 Date: Tue Jan 8 18:11:44 2008 +0100
22007 [new uImage] Fix uImage header pointer use in i386 do_bootm_linux()
22009 Use image header copy instead of a (possibly corrupted) pointer to
22010 a initial image location.
22012 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22014 commit 261dcf4624b25f3c551efcf8634e9194fabba9c3
22015 Author: Marian Balakowicz <m8@semihalf.com>
22016 Date: Tue Jan 8 18:11:44 2008 +0100
22018 [new uImage] Remove I386 uImage fake_header() routine
22020 I386 targets are not using a uImage format, instead fake header
22021 is added to ram image before it is further processed by bootm.
22023 Remove this fixup and force proper uImage use for I386.
22025 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22027 commit 559316faf7eae0614c91d77f509b57d6c4c091ba
22028 Author: Marian Balakowicz <m8@semihalf.com>
22029 Date: Tue Jan 8 18:11:44 2008 +0100
22031 [new uImage] Move CHUNKSZ definition to image.h
22033 CHUNKSZ defined for PPC and M68K is set to the same value of 64K,
22034 move this definition to a common header.
22036 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22038 commit 321359f20823e0b8c5ad38b64d007a6c48cda16e
22039 Author: Marian Balakowicz <m8@semihalf.com>
22040 Date: Tue Jan 8 18:11:43 2008 +0100
22042 [new uImage] Move gunzip() common code to common/gunzip.c
22044 Move gunzip(), zalloc() and zfree() to a separate file.
22045 Share zalloc() and zfree() with cramfs uncompress routine.
22047 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22049 commit d45d5a18b6b36688f2365623f9d550566c664b5b
22050 Author: Marian Balakowicz <m8@semihalf.com>
22051 Date: Tue Jan 8 18:11:43 2008 +0100
22053 [new uImage] Cleanup OF/FDT #if/#elif/#endif use in do_bootm_linux()
22055 Make CONFIG_OF_LIBFDT and CONFIG_OF_FLAT_TREE use more
22056 readable in PPC variant of do_bootm_linux() routine.
22058 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22060 commit 5d3cc55ecbae277e08f5ff771da20b1d6a36ec36
22061 Author: Marian Balakowicz <m8@semihalf.com>
22062 Date: Tue Jan 8 18:11:43 2008 +0100
22064 [new uImage] Move PPC do_bootm_linux() to lib_ppc/ppc_linux.c
22066 PPC implementation of do_bootm_linux() routine is moved to
22067 a dedicated file lib_ppc/ppc_linux.c
22069 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22071 commit b97a2a0a21f279d66de8a9bdbfe21920968bcb1c
22072 Author: Marian Balakowicz <m8@semihalf.com>
22073 Date: Tue Jan 8 18:14:09 2008 +0100
22075 [new uImage] Define a API for image handling operations
22077 - Add inline helper macros for basic header processing
22078 - Move common non inline code common/image.c
22079 - Replace direct header access with the API routines
22080 - Rename IH_CPU_* to IH_ARCH_*
22082 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22084 commit ed29bc4e8142b46b626f67524207b36e43d9aad6
22085 Author: Marian Balakowicz <m8@semihalf.com>
22086 Date: Thu Jan 31 13:19:58 2008 +0100
22088 Add missing cmd_ximg.o to common/Makefile
22090 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
22092 commit 37e3c62fa07a823e7569c872e3a9395d227ed8e3
22093 Author: Grzegorz Bernacki <gjb@semihalf.com>
22094 Date: Mon Jan 28 10:15:02 2008 +0100
22096 ADS5121e: DDR2 init/timing update.
22098 Signed-off-by: John Rigby <jrigby@freescale.com>
22099 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
22101 commit ac9152830d7fdebace8a260b7737ef2870c21ca0
22102 Author: John Rigby <jrigby@freescale.com>
22103 Date: Wed Jan 30 13:36:57 2008 -0700
22105 Device tree updates
22107 Changes to match 5121 device tree going mainline in 2.6.25.
22109 Change OF_SOC from "soc5121" to plain "soc".
22110 Remove unneeded "ref-frequency" fixups.
22111 Remove "address" enetaddr fixup.
22113 Add bus-frequency fixup for old OF_SOC so old
22114 kernels with old device trees will work with new
22115 u-boot with 66MHz IPS clock
22117 Signed-off-by: John Rigby <jrigby@freescale.com>
22119 commit de55d18df3ff2ea614624e74793de7c43520e0e7
22120 Author: John Rigby <jrigby@freescale.com>
22121 Date: Wed Jan 30 13:36:56 2008 -0700
22123 Change IPS freq to 66MHz
22125 Recommended frequency is 66MHz
22126 Change divider from 4 to 3.
22128 Signed-off-by: John Rigby <jrigby@freescale.com>
22130 commit cd9cb62f9d8b78d6c3af5d1e9b5a3d68a3d73974
22131 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22132 Date: Mon Jan 14 22:38:55 2008 +0100
22134 xsengine: rename board_post_init to board_late_init
22136 missing migration from "Cleanup of some init functions"
22137 in c837dcb1a316745092567bfe4fb266d0941884ff
22139 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22141 commit 8dafa87476b0d7170e219c2f5e3842c833a91807
22142 Author: Larry Johnson <lrj@acm.org>
22143 Date: Sat Jan 12 23:35:33 2008 -0500
22145 Add attribute POST_PREREL to ECC memory POST
22147 Signed-off-by: Larry Johnson <lrj@acm.org>
22149 commit ed2cf548cac80cd3cf8154dcfe7b2685bef45938
22150 Author: Kumar Gala <galak@kernel.crashing.org>
22151 Date: Thu Jan 17 08:25:45 2008 -0600
22153 QE: Move FDT support into a common file
22155 Move the flat device tree setup for QE related devices into
22156 a common file shared between 83xx & 85xx platforms that have QE's.
22158 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
22160 commit d38da537943cd36356b9d3d9d9b60533554b81d8
22161 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22162 Date: Wed Jan 23 17:20:14 2008 +0100
22164 AVR32: Make SDRAM refresh rate configurable
22166 The existing code assumes the SDRAM row refresh period should always
22167 be 15.6 us. This is not always true, and indeed on the ATNGW100, the
22168 refresh rate should really be 7.81 us.
22170 Add a refresh_period member to struct sdram_info and initialize it
22171 properly for both ATSTK1000 and ATNGW100. Out-of-tree boards will
22172 panic() until the refresh_period member is updated properly.
22174 Big thanks to Gerhard Berghofer for pointing out this issue.
22176 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22178 commit 61151cccb660cdb06a07fb283de6089913d7bde0
22179 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22180 Date: Thu Apr 19 10:10:11 2007 +0200
22182 ATSTK1000: Fix potential flash programming bug
22184 The (now obsolete) atngw100 flash programming code was having problems
22185 programming the onboard at49bv642 chip. The atstk1000 flash
22186 programming code may have the same bug, so import fix for this problem
22187 from the AVR32 Linux BSP.
22189 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22191 commit b2e1d5b64469f10dfcce27f7b0afd935684a8e11
22192 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22193 Date: Thu Nov 22 17:04:13 2007 +0100
22195 ATSTK1004: Fix comment about default load address
22197 The default load address is SDRAM + 2MB, not SDRAM + 4MB. The latter
22198 wouldn't have worked anyway since the board can only access 4MB of
22201 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22203 commit 8269ab53608d8db2aa06969c337ab0b0518211e5
22204 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22205 Date: Thu Nov 22 17:01:24 2007 +0100
22207 ATSTK1002: Use SDRAM + 4MB as default load address
22209 Many people run into problems when they compile a big kernel and load
22210 the uImage at the default SDRAM + 2MB address as the kernel will
22211 overwrite the uImage as it is being unpacked. Increase the default
22212 load address so that we can load a 4MB kernel image without any
22215 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22217 commit 2bcacc2d841b77f3d2d3910db722003742727e9f
22218 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22219 Date: Thu Nov 22 16:51:39 2007 +0100
22221 ATNGW100: Fix default mtest range
22223 Let mtest cover the whole SDRAM except the last megabyte, which is
22224 where u-boot lives.
22226 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22228 commit 9856a6b3104e0bc210b0868dfe691c52bf03c227
22229 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22230 Date: Tue Jan 22 15:31:56 2008 +0900
22232 sh: Fix register address of SH7722.
22234 The address of SH7722 is wrong by old document.
22235 This patch fixes this problem.
22237 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
22239 commit 30942b18b66f35f2ceedab39af10e9eccaa943cc
22240 Author: Mike Frysinger <vapier@gentoo.org>
22241 Date: Mon Feb 4 19:26:57 2008 -0500
22243 new command for displaying strings at specified memory locations
22245 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22247 commit b58d8b48e25b0c866d167cc577f118f528cd9e0a
22248 Author: Mike Frysinger <vapier@gentoo.org>
22249 Date: Mon Feb 4 19:26:57 2008 -0500
22251 rewrite/cleanup Blackfin RTC driver
22253 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22255 commit 94a91e248b71c3ff951fc27cff6909e82ca37d15
22256 Author: Mike Frysinger <vapier@gentoo.org>
22257 Date: Mon Feb 4 19:26:57 2008 -0500
22259 generate u-boot.ldr for Blackfin targets
22261 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22263 commit b779f7a59530436040f157f7841db7ab796542df
22264 Author: Mike Frysinger <vapier@gentoo.org>
22265 Date: Mon Feb 4 19:26:57 2008 -0500
22267 scrub unused symbols
22269 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22271 commit cc2977acc3bbbb7850f16645dd1081f95335868d
22272 Author: Mike Frysinger <vapier@gentoo.org>
22273 Date: Mon Feb 4 19:26:57 2008 -0500
22275 move Blackfin cpu object list to respective cpu directories
22277 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22279 commit d0b01a246d0a351bc7dce1d0c9cf6aebdf6d7505
22280 Author: Mike Frysinger <vapier@gentoo.org>
22281 Date: Mon Feb 4 19:26:57 2008 -0500
22283 interface to Blackfin on-chip One-Time-Programmable memory
22285 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22287 commit 4c727c77e43872d3a1d1f76a949fcb3f26a38788
22288 Author: Mike Frysinger <vapier@gentoo.org>
22289 Date: Mon Feb 4 19:26:56 2008 -0500
22291 add support for memory commands with Blackfin L1 instruction memory
22293 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22295 commit 6b9097e5e7490aa7b828c6f1a1c7a0e875df8464
22296 Author: Mike Frysinger <vapier@gentoo.org>
22297 Date: Mon Feb 4 19:26:56 2008 -0500
22299 use C code rather than inline assembly
22301 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22303 commit 97c26e006d2fa6d4e1560933ee6f385d8b8908b9
22304 Author: Mike Frysinger <vapier@gentoo.org>
22305 Date: Mon Feb 4 19:26:56 2008 -0500
22307 add Blackfin-specific reginfo command
22309 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22311 commit 0858b835e7ea501ea084d34cef75932f098342bb
22312 Author: Mike Frysinger <vapier@gentoo.org>
22313 Date: Mon Feb 4 19:26:55 2008 -0500
22315 add support for Blackfin symbol prefixes to examples
22317 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22319 commit 8dc48d71a4be753ea9f84956cd33600de35fad04
22320 Author: Mike Frysinger <vapier@gentoo.org>
22321 Date: Mon Feb 4 19:26:55 2008 -0500
22323 add Blackfin-specific bdinfo command
22325 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22327 commit 0003613e3c7df3b84b2cb92e797d77f46f15a43a
22328 Author: Mike Frysinger <vapier@gentoo.org>
22329 Date: Mon Feb 4 19:26:55 2008 -0500
22331 move -ffixed-P5 to blackfin_config.mk and drop unused -D__BLACKFIN__
22333 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22335 commit 60fa72d65610c7ef33e1d6db858979d05ff0df58
22336 Author: Mike Frysinger <vapier@gentoo.org>
22337 Date: Mon Feb 4 19:26:55 2008 -0500
22339 unify the Blackfin board targets
22341 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22343 commit d4d7730853e5d675f76ec666807da3028c91d592
22344 Author: Mike Frysinger <vapier@gentoo.org>
22345 Date: Mon Feb 4 19:26:55 2008 -0500
22347 punt Blackfin VDSP headers and import sanitized/auto-generated ones
22349 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22351 commit 6cfcce67671a3425229d66203386fa3cbd0cc3bd
22352 Author: Mike Frysinger <vapier@gentoo.org>
22353 Date: Mon Feb 4 19:26:54 2008 -0500
22355 always pull in asm/blackfin.h for Blackfin ports
22357 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22359 commit bf53974c2ddae678d7660f2b5ccfeb0732b6f5dc
22360 Author: Mike Frysinger <vapier@gentoo.org>
22361 Date: Mon Feb 4 19:26:54 2008 -0500
22363 add missing __raw versions of Blackfin read/write io functions
22365 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22367 commit 24e02d0fd3acc50e73e1a3cdd567f0a77946f15d
22368 Author: Mike Frysinger <vapier@gentoo.org>
22369 Date: Mon Feb 4 19:26:54 2008 -0500
22371 add the default Blackfin logo used by Blackfin boards with splash screens
22373 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22375 commit 4c58eb5552220e425c8af6ac8d2839244a2f57b1
22376 Author: Mike Frysinger <vapier@gentoo.org>
22377 Date: Mon Feb 4 19:26:54 2008 -0500
22379 add some more Blackfin docs
22381 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22383 commit 32a9f5f2160a034ea87ea651b233ef7c635e55cf
22384 Author: Mike Frysinger <vapier@gentoo.org>
22385 Date: Mon Feb 4 19:26:54 2008 -0500
22387 make smc91111_eeprom managment simpler by depending on the board configuration file rather than a hardcoded list of boards
22389 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22391 commit 4087bc88cebec75c432a7fe9f6afb545b0919831
22392 Author: Mike Frysinger <vapier@gentoo.org>
22393 Date: Mon Feb 4 19:26:54 2008 -0500
22395 fix building on Blackfin as the assembler supports the .set syntax, not the = syntax, for assigning symbols
22397 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22399 commit b45264ee85cbd92020640a32e02fb434fd557108
22400 Author: Mike Frysinger <vapier@gentoo.org>
22401 Date: Mon Feb 4 19:26:53 2008 -0500
22403 add gitignores for Blackfin pieces
22405 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
22407 commit a93907c43f847f076dd0e34ee3b69b5e8e6d0d29
22408 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22409 Date: Fri Jan 18 01:14:03 2008 +0100
22411 TFTP: add host ip addr support
22413 allow to use a different server as set in serverip
22414 add CONFIG_TFTP_FILE_NAME_MAX_LEN to configure the file name length
22415 if not defined the max length will be at 128
22417 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22419 commit e56b4b494cd92def577969f9678395aa22d34c9f
22420 Author: Timur Tabi <timur@freescale.com>
22421 Date: Wed Jan 9 14:35:26 2008 -0600
22423 85xx,86xx: Determine I2C clock frequencies and store in global_data
22425 Update global_data to define i2c1_clk and i2c2_clk to 85xx and 86xx.
22427 Update the get_clocks() function in 85xx and 86xx to determine the I2C
22428 clock frequency and store it in gd->i2c1_clk and gd->i2c2_clk.
22430 Signed-off-by: Timur Tabi <timur@freescale.com>
22432 commit 7ec8bb15ee368ea54d48d64867767a704d9ab4c2
22433 Author: Wolfgang Denk <wd@denx.de>
22434 Date: Thu Dec 27 10:56:54 2007 +0100
22436 OMAP5912: fix FIFO handling in UART driver
22438 According to the OMAP5912 Serial Interfaces Reference Guide (see
22439 http://focus.ti.com/lit/ug/spru760c/spru760c.pdf, page 150), the
22440 FIFO_EN enable bit in the FIFO Control Register (FCR) can only be
22441 changed when the baud clock is not running, i. e. when both DLL and
22444 Thus make sure that DLL and DLH are 0 when writing the FCR.
22446 Signed-off-by: Wolfgang Denk <wd@denx.de>
22448 commit 16158778b5f52f201e95ded2d2d9084b0ed5670d
22449 Author: Harald Welte <laforge@openmoko.org>
22450 Date: Wed Dec 19 15:10:52 2007 +0100
22452 ARM: S3C24x0 SoC NAND controller support
22454 This patch adds NAND support to the S3C24x0 SoC code in u-boot
22456 Signed-off-by: Harald Welte <laforge@openmoko.org>
22458 commit a7c185ed3d9f8ebd85cfc286e1ffee72e4803163
22459 Author: Harald Welte <laforge@openmoko.org>
22460 Date: Wed Dec 19 14:24:40 2007 +0100
22462 ARM: s3c24xx: Multiple serial port support
22464 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's
22466 Signed-off-by: Harald Welte <laforge@openmoko.org>
22468 commit a25f72f1f73a11de68251fb88c89991e202e68fa
22469 Author: Harald Welte <laforge@openmoko.org>
22470 Date: Wed Dec 19 14:16:57 2007 +0100
22472 ARM: arm920t: Allow use of 'gd' pointer from IRQ
22474 This patch allows us to use the 'gd' pointer (and thus environment
22475 and everything else associated with it) from interrupt context on
22478 Signed-off-by: Harald Welte <laforge@openmoko.org>
22480 commit be19bd5cd0f454b63298844a0b5377e029b2caad
22481 Author: Harald Welte <laforge@openmoko.org>
22482 Date: Wed Dec 19 14:19:38 2007 +0100
22484 ARM: arm920/s3c24xx: IRQ demulitplexer callback
22486 This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
22487 plus a stub implementation of it for the S3C2410.
22489 The purpose is to allow arm920t implementations such as the s3c24x0 to
22490 implement interrupt handlers in u-boot without having to touch core
22493 Signed-off-by: Harald Welte <laforge@openmoko.org>
22495 commit a41dbbd98d201d8aea31b5d21df4742c20cd7eda
22496 Author: Hebbar <gururajakr@sanyo.co.in>
22497 Date: Tue Dec 18 16:03:07 2007 -0800
22499 ARM: Display Ethernet info in do_bdinfo only if CONFIG_CMD_NET is defined
22501 Add ifdef to bdinfo command to display ethernet information
22502 only if CONFIG_CMD_NET is defined for arm modules.
22504 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
22506 commit f7ad79b6f9f0f45437b62e19b45356cc2aaf4884
22507 Author: Hebbar <gururajakr@sanyo.co.in>
22508 Date: Tue Dec 18 16:00:54 2007 -0800
22510 ARM: add I2C init function call in lib_arm/board.c
22512 Adds I2C init func call to init sequence for ARM boards. This is
22513 present in ppc,blackfin and other processor init sequence.
22515 Signed-off-by: K R Gururaja Hebbar <gururajakr@sanyo.co.in>
22517 commit ff02f139804f3cb61414f7bbcbfdaa0279e3efae
22518 Author: Stefan Roese <sr@denx.de>
22519 Date: Fri Feb 1 09:38:29 2008 +0100
22521 ppc4xx: Fix ndfc HW ECC byte order
22523 The current ndfc HW ECC implementation swaps the first two ECC bytes.
22524 But the 4xx NDFC already uses the SMC (Smart Media Card) ECC ordering,
22525 so this swapping in the HW ECC driver is bogus. This patch fixes this
22526 problem and now really uses the SMC ECC byte order.
22528 Thanks to Sean MacLennan for pointing this out.
22530 Signed-off-by: Stefan Roese <sr@denx.de>
22532 commit e1d1429b49b0ee58c80f8c7b29c1ebaf8be7f5f1
22533 Author: Stefan Roese <sr@denx.de>
22534 Date: Wed Jan 30 15:35:50 2008 +0100
22536 ppc4xx: Fix GPIO configuration for pcs440ep
22538 The SRD0_PFC0 register was not configured correctly to enable the GPIO's
22539 49-63 for GPIO. They have been configured as trace signals. This patch
22540 fixes this by clearing the corresponding bit.
22542 Signed-off-by: Stefan Roese <sr@denx.de>
22544 commit 28d77d968bfe0316deb5bf15c17f57d5ff2c8821
22545 Author: Stefan Roese <sr@denx.de>
22546 Date: Wed Jan 30 14:48:28 2008 +0100
22548 ppc4xx: Fix problem with init-ram bigger than 4k on 440 platforms
22550 Signed-off-by: Stefan Roese <sr@denx.de>
22552 commit 4fedfddf97461b88668b9aec774dfb7a0c6dc368
22553 Author: Ladislav Michl <ladis@linux-mips.org>
22554 Date: Fri Dec 7 00:42:32 2007 +0100
22556 ARM: Board voiceblue update
22558 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22560 commit 2c5260f711168d5ee91c70ddbb7d897013eefc46
22561 Author: Ladislav Michl <ladis@linux-mips.org>
22562 Date: Thu Dec 6 23:24:57 2007 +0100
22564 ARM: AT91RM9200 based boards config cleanup
22566 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22568 Remove nowhere used struct bd_info_ext, remove trailing whitespaces, fix
22571 commit 481f28b1db5cd21deb55f69399ba240e107af4c7
22572 Author: Ladislav Michl <ladis@linux-mips.org>
22573 Date: Thu Dec 6 22:59:16 2007 +0100
22575 ARM: Fix at91rm9200dk base address
22577 Somewhere during development of U-Boot-1.1.3 CONFIG_BOOTBINFUNC was
22578 renamed into CONFIG_INIT_CRITICAL which was 04 Apr 2005 replaced
22579 with CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT.
22580 However CONFIG_SKIP_LOWLEVEL_INIT has oposite meaning to
22581 CONFIG_BOOTBINFUNC, so fix configuration to reflect this fact.
22582 I'm sending this patch 4th (!) time in hope it produces at least some
22585 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
22587 Fix at91rm9200dk base and environment address.
22589 commit c95219fae2a7add7daa2f91aedca65b1698465c7
22590 Author: stefano babic <sbabic@denx.de>
22591 Date: Tue Nov 20 10:40:24 2007 +0100
22593 MMC for PXA 27X (resubmit)
22595 MMC support for X_Scale PXA is broken and does not work.
22596 Mainly, the mmc_init() function cannot recognize current SD/MMC cards.
22597 There were already some patches around the world but none of them was
22598 merged into the official u-boot tree.
22600 This patch makes order fixing this issue. Resubmit after code cleanup.
22602 Applied and tested on PXA 270 (TrizepsIV module).
22604 Signed-off-by: Stefano Babic <sbabic@denx.de>
22606 commit 96bbfa1e6625ce23a150936863b3ecf4c853eb33
22607 Author: stefano babic <sbabic@denx.de>
22608 Date: Tue Nov 20 10:37:04 2007 +0100
22610 Fix gcc issues in pxa-regs.h
22612 Fix gcc4 issue. With some toolchain, a previous patch that fixes gcc4
22613 issues generates wrong code.
22614 (Problem was reported with gcc-4.0.2-glibc-2.3.6/arm-softfloat-linux-gnu).
22615 This patch fixes the problem and solves the gcc-4 issues as the linux
22618 Signed-off-by: Stefano Babic <sbabic@denx.de>
22619 Signed-off-by: Dmitry Ivanov <ivadmitry@gmail.com>
22621 commit 7047b388876e7b905b2ec4edb8010543e3641b85
22622 Author: Jens Gehrlein <sew_s@tqs.de>
22623 Date: Tue Jan 29 08:45:03 2008 +0100
22625 TQM834x: enable DHCP
22627 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
22628 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22630 commit a877004d44ca7dbc1e618add3eeb1da7c84e4bec
22631 Author: Jens Gehrlein <sew_s@tqs.de>
22632 Date: Tue Jan 29 08:45:02 2008 +0100
22634 TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
22636 Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
22637 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22639 commit 8931ab176025b03cfc320b3fd1eca432a88ed560
22640 Author: Ben Warren <biggerbadderben@gmail.com>
22641 Date: Sat Jan 26 23:41:19 2008 -0500
22643 Fix conditional compilation of mpx8xxx_spi driver
22645 This driver should only compile if CONFIG_MPC8XXX_SPI is set
22647 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22648 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22650 commit 63f732d3d3880feb531f48af247c025bf01462b0
22651 Author: Rafal Jaworowski <raj@semihalf.com>
22652 Date: Tue Jan 29 17:00:34 2008 +0100
22654 API: Provide dummy halt() in the glue layer.
22656 This fixes a demo app link failure on platforms configured with CONFIG_PANIC_HANG.
22658 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
22660 commit 0dc1fc22af86d16993388d9ed9630dbaa2d51826
22661 Author: Rafal Jaworowski <raj@semihalf.com>
22662 Date: Tue Jan 29 16:57:38 2008 +0100
22664 API: Convert conditional building to the new scheme.
22666 This fixes a build breakage with CONFIG_API enabled, which appeared after
22667 the recent changes in the U-Boot build system.
22669 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
22671 commit 98b742489c09780be6a832eeaa4e5eff824792bb
22672 Author: Wolfgang Denk <wd@denx.de>
22673 Date: Fri Jan 25 09:56:17 2008 +0100
22675 inka4x0: remove dead code
22677 Signed-off-by: Wolfgang Denk <wd@denx.de>
22679 commit 4f93f8b1a4d35b6d302842132edba920ef8f62aa
22680 Author: Becky Bruce <becky.bruce@freescale.com>
22681 Date: Wed Jan 23 16:31:06 2008 -0600
22683 86xx: Add reginfo command
22685 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22687 commit ddcebcb638715a6278da93b553d5016f99823816
22688 Author: Becky Bruce <becky.bruce@freescale.com>
22689 Date: Wed Jan 23 16:31:05 2008 -0600
22691 86xx: Add print_laws function to fsl_law.c
22693 This can be used for debug, and will be used by board code
22694 to help implement reginfo.
22696 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22698 commit 9cd32426f26a0567bb61f339edd83c6a2ce9bfc3
22699 Author: Becky Bruce <becky.bruce@freescale.com>
22700 Date: Wed Jan 23 16:31:04 2008 -0600
22702 86xx: Remove old-style law setup code
22704 This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.
22706 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22708 commit 713d8186649dae874613d495b0cecaa039a98b30
22709 Author: Becky Bruce <becky.bruce@freescale.com>
22710 Date: Wed Jan 23 16:31:03 2008 -0600
22712 86xx: Convert sbc8641d to use new law setup code.
22714 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22716 commit 031976f6364b93833e989f57e9f1e023e0be8c4c
22717 Author: Becky Bruce <becky.bruce@freescale.com>
22718 Date: Wed Jan 23 16:31:02 2008 -0600
22720 86xx: Convert mpc8610hpcd to new law setup method.
22722 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22724 commit 4933b91f8a49e436681f163df3173beb91cac44a
22725 Author: Becky Bruce <becky.bruce@freescale.com>
22726 Date: Wed Jan 23 16:31:01 2008 -0600
22728 86xx: Support new law setup method and convert mpc8641
22730 Adds the support code in cpu/mpc86xx for the new law setup code
22731 recently created fsl_law.c, and changes the MPC8641HPCN config
22734 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22736 commit 1a41f7ce9c086e208c0eabf52565a237af2a2bd1
22737 Author: Becky Bruce <becky.bruce@freescale.com>
22738 Date: Wed Jan 23 16:31:00 2008 -0600
22740 86xx: Rearrange the sequence in start.S
22742 * split the BAT initialization so that only 2 BATs (for the boot page
22743 and stack) are programmed very early on. The rest are initialized later.
22744 * Move other BAT setup, ccsrbar setup, and law setup later in the code
22745 after translation has been enabled.
22747 These changes will facilitate the moving of law and BAT initialization
22748 to C code, and will aid with 36-bit physical addressing support.
22750 Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
22752 commit 33dac03b1b5d61e4fed7bad445ba40b4c97feba0
22753 Author: Wolfgang Denk <wd@denx.de>
22754 Date: Wed Jan 23 14:41:37 2008 +0100
22756 Coding Style Cleanup; update CHANGELOG
22758 Signed-off-by: Wolfgang Denk <wd@denx.de>
22760 commit 865f0f9754b95183cad395de7e8cb85df0c6ea1f
22761 Author: Wolfgang Denk <wd@denx.de>
22762 Date: Wed Jan 23 14:31:17 2008 +0100
22764 Coding Style Cleanup; update CHANGELOG
22766 Signed-off-by: Wolfgang Denk <wd@denx.de>
22768 commit cfe5ca77976afdbe7ecb86e39fd7505bde636ace
22769 Author: Dave Liu <r63238@freescale.com>
22770 Date: Fri Jan 18 10:07:04 2008 +0800
22772 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
22774 The commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
22775 cause the 83xx immap broken, so the DMA and PCI will
22778 The patch fix the struct spi8xxx and rm struct spi83xx.
22780 Signed-off-by: Dave Liu <daveliu@freescale.com>
22781 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
22783 commit 6b4439444286e0fcd01596df504e6ca897ad3e5a
22784 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22785 Date: Sat Apr 14 17:11:49 2007 +0200
22787 AVR32: ATNGW100 board support
22789 Add support for the ATNGW100 Network Gateway reference design,
22790 including flash, ethernet and MMC support.
22792 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22794 commit e006927a0b9a54e8ee7685d8ac748aaad6801862
22795 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
22796 Date: Sat Nov 24 18:15:31 2007 +0100
22798 AVR32: Initialize ipaddr, loadaddr and bootfile at startup
22800 I don't know why the relevant layers can't do this by itself, but this
22803 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
22805 commit 799891ef7b1b3432032ec23466df6b665a797fa4
22806 Author: Michael Schwingen <michael@schwingen.org>
22807 Date: Fri Jan 18 00:04:28 2008 +0100
22809 Add AcTux board support
22813 The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
22815 contain changes for multiple boards, the board-specific files follow as
22818 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22820 commit 66a4344a4d910a11125df7768899ad529719855e
22821 Author: Michael Schwingen <michael@schwingen.org>
22822 Date: Wed Jan 16 19:53:23 2008 +0100
22824 add AcTux-4 board support
22826 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22828 commit bc24345e4101a5c996d6b48ce497b09c53025dc6
22829 Author: Michael Schwingen <michael@schwingen.org>
22830 Date: Wed Jan 16 19:51:55 2008 +0100
22832 add AcTux-3 board support
22834 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22836 commit aebf00fc4d1343b24715373893f7b20bf462d1e9
22837 Author: Michael Schwingen <michael@schwingen.org>
22838 Date: Wed Jan 16 19:51:14 2008 +0100
22840 add AcTux-2 board support
22842 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22844 commit ea99e8f05b7240fd657739e286664664ae160abe
22845 Author: Michael Schwingen <michael@schwingen.org>
22846 Date: Wed Jan 16 19:50:37 2008 +0100
22848 add AcTux-1 board support
22850 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22852 commit 3d9f3bfb7a33efe8e41e01b025563cd712c57d64
22853 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22854 Date: Mon Jan 14 19:20:08 2008 +0100
22856 ARM: remove useless function board_post_init
22858 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22860 commit 96bd462942022e4569b582c072a0ed26de1cd19b
22861 Author: Michael Schwingen <michael@schwingen.org>
22862 Date: Thu Jan 10 14:59:46 2008 +0100
22866 enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
22867 No handshaking is done, but the active RTS signal allows to
22868 connect to the target using a PC which is using RTS/CTS
22869 handshake, and does no harm if the PC is set to ignore RTS.
22871 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22873 commit a1cf027a08f9dc1c0e769499e6f4fbddcf9cab93
22874 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22875 Date: Mon Jan 7 08:41:34 2008 +0100
22877 IXP: add dynamic microcode addr
22879 allow to load the microde from flash or ram by download it through
22880 the serial or other.
22882 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22883 Acked-by: Stefan Roese <sr@denx.de>
22885 commit 63ebcc4615dd39926ccf61f1d5f3510262ef6564
22886 Author: Michael Schwingen <michael@schwingen.org>
22887 Date: Sat Nov 10 15:44:12 2007 +0100
22889 load ixp42x NPE firmware from separate flash block, remove dead code
22893 the following patch adds support to move the IXP42X NPE firmware to a
22894 separate flash block, whose start address is defined in
22895 CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
22896 NPE-enabled u-boot without copyright problems due to the NPE firmware.
22898 I hope the patch applies, I get whitespace-related differences in the NPE
22899 files due to trailing whitespace in the original versions.
22901 Signed-off-by: Michael Schwingen <michael@schwingen.org>
22902 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
22904 commit 57a127201eb3d8cc19170a008e0bd7af608bd72f
22905 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22906 Date: Tue Jan 15 14:15:46 2008 -0600
22908 ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
22910 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22911 Signed-off by: John Rigby <jrigby@freescale.com>
22913 commit 1aee111135d8660a164d4f6bf7d66b032ea535cf
22914 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22915 Date: Tue Jan 15 14:02:49 2008 -0600
22917 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
22919 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22920 Signed-off by: John Rigby <jrigby@freescale.com>
22922 commit 777d1abd9796f1c2e148417cc10657e847d318ce
22923 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22924 Date: Tue Jan 15 14:00:25 2008 -0600
22926 ColdFire: Add MCF547x_8x FEC driver
22928 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22929 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22930 Signed-off by: John Rigby <jrigby@freescale.com>
22932 commit 72f56adc0b25d43875ad067bae6be1bcea86b79f
22933 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22934 Date: Tue Jan 15 13:54:09 2008 -0600
22936 ColdFire: Add MCF547x_8x dma code and header files
22938 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22939 Signed-off by: John Rigby <jrigby@freescale.com>
22941 commit ce09fc49b56ea3c442794b6be9b7db4b99dfdc87
22942 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22943 Date: Tue Jan 15 13:52:03 2008 -0600
22945 ColdFire: Add MCF547x_8x dma code - 2
22947 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22948 Signed-off by: John Rigby <jrigby@freescale.com>
22950 commit 11865ea844e7154fd30c7e2860da4eed4a12ad1f
22951 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22952 Date: Tue Jan 15 13:48:52 2008 -0600
22954 ColdFire: Add MCF547x_8x dma code - 1
22956 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22957 Signed-off by: John Rigby <jrigby@freescale.com>
22959 commit 4621fc3fe7cd65b78b3cbd31f65c9f7f72b22bd3
22960 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22961 Date: Tue Jan 15 13:39:44 2008 -0600
22963 ColdFire: Add MCF547x_8x related header files
22965 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22966 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
22967 Signed-off by: John Rigby <jrigby@freescale.com>
22969 commit 570c0186aecab1b747b2d44d0e1d3c1ac4cb27f5
22970 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22971 Date: Tue Jan 15 13:37:34 2008 -0600
22973 ColdFire: Add MCF547x_8x cpu arch
22975 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22976 Signed-off by: John Rigby <jrigby@freescale.com>
22978 commit e2756f4b54aba0e0523b81dd145666829cf7fd59
22979 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22980 Date: Mon Jan 14 17:47:23 2008 -0600
22982 ColdFire: Add MCF5227x cpu and M52277EVB support-3
22984 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22985 Signed-off by: John Rigby <jrigby@freescale.com>
22987 commit c87581027994c148131b2f11aa75501f782ec19a
22988 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22989 Date: Mon Jan 14 17:46:19 2008 -0600
22991 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
22993 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22994 Signed-off by: John Rigby <jrigby@freescale.com>
22996 commit 1552af70ecab11b9f3dceff7528ed15faf678b9d
22997 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
22998 Date: Mon Jan 14 17:43:33 2008 -0600
23000 ColdFire: Add MCF5227x cpu and M52277EVB support-1
23002 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23003 Signed-off by: John Rigby <jrigby@freescale.com>
23005 commit 397b7b81a1f1008798ae1206913508cc89cb3a7d
23006 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23007 Date: Mon Jan 14 17:35:44 2008 -0600
23009 ColdFire: Fix CFI Flash low level Read/Write macro
23011 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23012 Signed-off by: John Rigby <jrigby@freescale.com>
23014 commit aa5f1f9dc815a76f6dffb580798599c028fe7feb
23015 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23016 Date: Mon Jan 14 17:23:08 2008 -0600
23018 ColdFire: Add M5373EVB platform support - 2
23020 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23021 Signed-off by: John Rigby <jrigby@freescale.com>
23023 commit 1ac559d4aa358f63b48c62b564224c06feeb4e36
23024 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23025 Date: Mon Jan 14 17:19:54 2008 -0600
23027 ColdFire: Add M5373EVB platform support - 1
23029 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23030 Signed-off by: John Rigby <jrigby@freescale.com>
23032 commit 320d61991fa3190ee41765601ed017b6b5ff7b2b
23033 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23034 Date: Mon Jan 14 17:17:03 2008 -0600
23036 ColdFire: Update FlexBus CS for MCF532x
23038 Definition update and change from 16bit to 32bit
23040 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23041 Signed-off by: John Rigby <jrigby@freescale.com>
23043 commit 2e72ad0644b940817a89a3590ce0d7b99c05c396
23044 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23045 Date: Mon Jan 14 17:11:47 2008 -0600
23047 ColdFire: PCI and misc updates for MCF5445x
23049 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23050 Signed-off by: John Rigby <jrigby@freescale.com>
23052 commit d2b16493480ac3d4a60ad7d835b0dc27d2e99cee
23053 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23054 Date: Mon Jan 14 17:06:55 2008 -0600
23056 ColdFire: MCF5445x header files cleanup
23058 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23059 Signed-off by: John Rigby <jrigby@freescale.com>
23061 commit d9aae6260993a93f7fcf13abff85a601f4f50ea7
23062 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23063 Date: Mon Jan 14 16:59:42 2008 -0600
23065 ColdFire: MCF532x header files cleanup
23067 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23068 Signed-off by: John Rigby <jrigby@freescale.com>
23070 commit 7af7751d047e74b2ec58400f97b879c56446b3e8
23071 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
23072 Date: Mon Jan 14 15:30:15 2008 -0600
23074 ColdFire: Add modules header files
23076 Add CF specific modules header files
23078 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
23079 Signed-off-by: John Rigby <jrigby@freescale.com>
23081 commit 2956acd5ef93a498337f8ac2ec6ae6a77d491dc5
23082 Author: Kim Phillips <kim.phillips@freescale.com>
23083 Date: Thu Jan 17 12:48:00 2008 -0600
23085 codingstyle cleanup for spi driver
23087 ..and rm unused CONFIG_FSL_SPI define
23089 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23091 commit d59feffb42c9f174116db7a82a311df98983dfce
23092 Author: Haiying Wang <Haiying.Wang@freescale.com>
23093 Date: Wed Jan 16 17:12:12 2008 -0500
23095 FSL: Fix common EEPROM_data structure definition
23097 - Fix EEPROM_data structure definition according to System EEPROM Data Format.
23098 - Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
23101 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
23103 commit 6bee764bd6da510a4aad614880300c968bc7318d
23104 Author: Timur Tabi <timur@freescale.com>
23105 Date: Wed Jan 16 15:48:12 2008 -0600
23107 86xx: enable command-line editing
23109 Enable command-line editing for all MPC86xx boards.
23111 Signed-off-by: Timur Tabi <timur@freescale.com>
23113 commit 80ddd22626d321a772ebfba304eb7830cb4f6bac
23114 Author: Ben Warren <biggerbadderben@gmail.com>
23115 Date: Wed Jan 16 22:37:42 2008 -0500
23117 Implement hard SPI driver on MPC8349EMDS
23119 This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
23120 This board has an ST M25P40 4Mbit EEPROM on its SPI bus
23122 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23123 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23125 commit 04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
23126 Author: Ben Warren <biggerbadderben@gmail.com>
23127 Date: Wed Jan 16 22:37:35 2008 -0500
23129 Add support for a Freescale non-CPM SPI controller
23131 This patch adds support for the SPI controller found on Freescale PowerPC
23132 processors such as the MCP834x family. Additionally, a new config option,
23133 CONFIG_HARD_SPI, is added for general purpose SPI controller use.
23135 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23136 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23138 commit a8cb43a89be6cfd283257a603dd9841503ccce0f
23139 Author: Dave Liu <r63238@freescale.com>
23140 Date: Thu Jan 17 18:23:19 2008 +0800
23142 mpc83xx: Fix the fatal conflict of merge
23144 The commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
23145 will cause the mpc8315erdb board can't boot up.
23147 The patch fix that bug, and remove the duplicated #ifdef
23148 CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
23149 MPC8313E processor.
23151 Signed-off-by: Dave Liu <daveliu@freescale.com>
23152 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23154 commit 3259eeaa4148125a81417477f62c05bd67f60587
23155 Author: Larry Johnson <lrj@acm.org>
23156 Date: Thu Jan 17 08:50:09 2008 -0500
23158 Merge Sequoia beautification into Korat code
23160 Signed-off-by: Larry Johnson <lrj@acm.org>
23162 commit e16925773211291b562e77187061e9dd1d757217
23163 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23164 Date: Thu Jan 17 07:45:05 2008 +0100
23166 net: add 'ethrotate' environment variable
23168 [PATCH] net: add 'ethrotate' environment variable
23170 This patch replaces the buildtime configuration option
23171 CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
23172 configuration veriable. See README.
23174 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23175 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23177 commit ba52be3d0e618c26070e93aaf3c1f2d2adf5571f
23178 Author: Stefan Roese <sr@denx.de>
23179 Date: Thu Jan 17 14:29:04 2008 +0100
23181 ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
23183 Signed-off-by: Stefan Roese <sr@denx.de>
23185 commit 55ed1516cbc1dad3ae277c67ee06fc4a46eaac7d
23186 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23187 Date: Thu Jan 17 18:07:32 2008 +0900
23189 sh: Remove CONFIG_COMMANDS from MS7720SE config file
23191 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23193 commit 055606bd25e88c0cd04ad348a679a04b1b616bee
23194 Author: Niklaus Giger <niklaus.giger@netstal.com>
23195 Date: Wed Jan 16 18:39:20 2008 +0100
23197 ppc4xx: Netstal HCU4 board: added various fixes and POST
23199 - Moved some common code to netstal/common/nm_bsp.c.
23200 - sdram initialisation goes go netstal/common/fixed_sdram.c.
23201 - Added support for POST.
23202 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
23204 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23206 commit 69b0634a4ee98c9791815600d43b99f626a952f3
23207 Author: Niklaus Giger <niklaus.giger@netstal.com>
23208 Date: Thu Jan 17 12:53:56 2008 +0100
23210 ppc4xx: netstal/common define routines used by all boards
23212 Added some routines used by all Netstal boards:
23213 - nm_bsp.c: - nm_show_print and
23214 - common_misc_init_r
23215 - set_params_for_sw_install. Very specific code to handle our SW
23216 installation procedure
23217 - fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
23218 to handle sdram initialization.
23219 - nm.h: Common header
23221 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23223 commit efeff5382b7a91b48a1aa68b2b75f92ad1d33ff8
23224 Author: Niklaus Giger <niklaus.giger@netstal.com>
23225 Date: Wed Jan 16 18:39:18 2008 +0100
23227 ppc4xx: Netstal HCU5 board: added various fixes and POST
23229 - Moved some common code to nestal/common/nm_bsp.c.
23230 - Added support for the vxWorks EDR.
23231 - Enable trace for Lauterbach, if present.
23232 - Added support for POST.
23233 - Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
23235 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23237 commit 4371090e5da77edc7bf9f296364db4801639d9c4
23238 Author: Niklaus Giger <niklaus.giger@netstal.com>
23239 Date: Wed Jan 16 18:39:08 2008 +0100
23241 ppc4xx: Netstal HCU5 board. Added POST. Various fixes
23244 - Reduced rom_size from 384 to 320 kB
23245 - Environment is now in flash
23249 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23251 commit 4bd5036e60afac37e484c2d35cbbe7f6cc1623e7
23252 Author: Niklaus Giger <niklaus.giger@netstal.com>
23253 Date: Wed Jan 16 18:37:50 2008 +0100
23255 ppc4xx: Netstal HCU4 board. Added POST. Various fixes
23258 - Reduced rom_size from 384 to 320 kB
23259 - Environment is now in flash
23263 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
23265 commit 1a3ac86b79fcb690275c85861c8efa6a3899060a
23266 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23267 Date: Thu Jan 17 10:53:08 2008 +0100
23269 ppc4xx: Complete DU440 board support
23271 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23273 commit 15a08bc2bef91e5f1ea4b9cf60e46832d86bcc1f
23274 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23275 Date: Thu Jan 17 10:52:30 2008 +0100
23277 ppc4xx: Add DU440 board support
23279 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23281 commit ac331da07db3860f11fa1d0fd3db7c810bce1198
23282 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23283 Date: Thu Jan 17 15:53:52 2008 +0900
23285 sh: Update SuperH SCIF driver
23287 This patch fixed wrong SH7720 CPU macro and changed macro that
23288 calculated value of SCBRR register.
23290 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
23292 commit 334e442e6fac59be91244063e9b3f6ca25e8daf8
23293 Author: Grzegorz Bernacki <gjb@semihalf.com>
23294 Date: Wed Jan 16 15:12:47 2008 +0100
23296 Set ips dividor to 1/4 of csb clock.
23298 Previous setting cause ips clock to be out of spec. This bug was found by John
23299 Rigby from Freescale.
23301 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
23303 commit 7dc358bb0de9e2fa341f3b4c914466b1f34b2d89
23304 Author: Kumar Gala <galak@kernel.crashing.org>
23305 Date: Thu Jan 17 02:19:18 2008 -0600
23307 85xx: Get ride of old TLB setup code
23309 Now that all boards have been converted, remove old config code and the
23310 config option for the new style.
23312 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23314 commit 3b558e26a5ef31635787d6d6e97d70939d4f892d
23315 Author: Kumar Gala <galak@kernel.crashing.org>
23316 Date: Thu Jan 17 02:02:10 2008 -0600
23318 85xx: Convert TQM85xx to new TLB setup
23320 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23322 commit 74121b470c14f7eaf284ee838bffca6f9521069e
23323 Author: Kumar Gala <galak@kernel.crashing.org>
23324 Date: Thu Jan 17 01:56:32 2008 -0600
23326 85xx: Convert STXGP3 & STXSSA to new TLB setup
23328 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23330 commit 143b518d9125b54f96f1d7f1afc640b8aae81ff0
23331 Author: Kumar Gala <galak@kernel.crashing.org>
23332 Date: Thu Jan 17 01:44:34 2008 -0600
23334 85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
23336 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23338 commit 818218bac6a11591e2542c344d2330e0f4e1968b
23339 Author: Kumar Gala <galak@kernel.crashing.org>
23340 Date: Thu Jan 17 01:31:34 2008 -0600
23342 85xx: Convert PM854/PM856 to new TLB setup
23344 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23346 commit ff4681c9285b2b4d24552a19cacc1769fe2fc7e0
23347 Author: Kumar Gala <galak@kernel.crashing.org>
23348 Date: Thu Jan 17 01:25:33 2008 -0600
23350 85xx: Convert MPC8540EVAL to new TLB setup
23352 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23354 commit 73aa9ac2b46f1cfd039106ebd6b9865016005234
23355 Author: Kumar Gala <galak@kernel.crashing.org>
23356 Date: Thu Jan 17 01:12:22 2008 -0600
23358 85xx: Convert MPC8568 MDS to new TLB setup
23360 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23362 commit 0db37dc2eed30884db2daa24dbd9a113b5d00610
23363 Author: Kumar Gala <galak@kernel.crashing.org>
23364 Date: Thu Jan 17 01:01:09 2008 -0600
23366 85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
23368 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23370 commit 219a81b98d834f9071b6f7c3bdc6b7ec39cc46cc
23371 Author: Kumar Gala <galak@kernel.crashing.org>
23372 Date: Thu Jan 17 00:52:29 2008 -0600
23374 85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
23376 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23378 commit 80d0b6a1498761c4355b2db9c8001b04c295e7b8
23379 Author: Kumar Gala <galak@kernel.crashing.org>
23380 Date: Thu Jan 17 00:32:17 2008 -0600
23382 85xx: Convert ATUM8548 to new TLB setup
23384 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23386 commit 0f7a3dc95cbff3c21bd6dbc639313796412bbbab
23387 Author: Kumar Gala <galak@kernel.crashing.org>
23388 Date: Wed Jan 16 23:11:57 2008 -0600
23390 85xx: Convert MPC8544 DS to new TLB setup
23392 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23394 commit 8716318057a5f60ab1ba081ece2dbe82ae00e1ee
23395 Author: Kumar Gala <galak@kernel.crashing.org>
23396 Date: Wed Jan 16 22:38:34 2008 -0600
23398 85xx: Reworked initial processor init
23400 Reworked the initial processor initialzation sequence:
23401 * introduced cpu_early_init_f that is run in address space 1 (AS=1)
23402 * Moved TLB/LAW and CCSR init into cpu_early_init_f()
23403 * Reworked initial asm code to do most of the core init before TLBs
23405 The main reasons for these changes are to allow handling of 36-bit phys
23406 addresses in the future and some of the issues that will exist when we
23409 There are a few caveats on what can be initialized via the LAW and TLB
23411 * TLB entry 14/15 can't be initialized via the TLB table
23412 * any LAW that covers the implicit boot window (4G-8M to 4G) must map to
23413 the code that is currently executing.
23415 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23417 commit 44a23cfd6360a68eaa41f945190618a55519eac3
23418 Author: Kumar Gala <galak@kernel.crashing.org>
23419 Date: Wed Jan 16 22:33:22 2008 -0600
23421 85xx: Introduce new tlb API
23423 Add a set of functions to manipulate TLB entries:
23424 * set_tlb() - write a tlb entry
23425 * invalidate_tlb() - invalidate a tlb array
23426 * disable_tlb() - disable a variable size tlb entry
23427 * init_tlbs() - setup initial tlbs based on static table
23429 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23431 commit be88b1699863c262818f3af7f60173b4d48df8fc
23432 Author: Stefan Roese <sr@denx.de>
23433 Date: Thu Jan 17 07:50:17 2008 +0100
23435 ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
23437 Signed-off-by: Stefan Roese <sr@denx.de>
23439 commit c8c41d4a80b1a8ad5984a287d81ea780496259f8
23440 Author: Kumar Gala <galak@kernel.crashing.org>
23441 Date: Wed Jan 16 10:04:42 2008 -0600
23443 85xx: Use proper defines for PCI addresses
23445 We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
23446 While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
23447 be used for configuring the PCI ATMU.
23449 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23451 commit 54a5070115eff38e9b324b78abdfa0b4520580b9
23452 Author: Kumar Gala <galak@kernel.crashing.org>
23453 Date: Wed Jan 16 09:22:29 2008 -0600
23455 85xx: Remove old style of LAW init
23457 All boards are now using the new fsl_law code so we can drop the old version.
23459 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23461 commit 4d3521cc79cabc61edf12c48c0ce318d4efb712f
23462 Author: Kumar Gala <galak@kernel.crashing.org>
23463 Date: Wed Jan 16 09:15:29 2008 -0600
23465 85xx: convert remaining 85xx boards over to use new LAW init code
23467 Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
23468 to use new LAW init code.
23470 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23472 commit 572b13afc42710f2957c382a710360429c0e099b
23473 Author: Kumar Gala <galak@kernel.crashing.org>
23474 Date: Wed Jan 16 09:11:53 2008 -0600
23476 85xx: convert STXGP3/STXSSA over to use new LAW init code
23478 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23480 commit 45f2166ac0233a9263058378f39612bd11f61196
23481 Author: Kumar Gala <galak@kernel.crashing.org>
23482 Date: Wed Jan 16 09:06:48 2008 -0600
23484 85xx: convert PM854/PM856 over to use new LAW init code
23486 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23488 commit e2b159d0070ee06e4ac7e2f9381d3e8e542e614a
23489 Author: Kumar Gala <galak@kernel.crashing.org>
23490 Date: Wed Jan 16 09:05:27 2008 -0600
23492 85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
23494 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23496 commit 2cfaa1aa1aac39a81006b7b27e0e431bf21f6dfa
23497 Author: Kumar Gala <galak@kernel.crashing.org>
23498 Date: Wed Jan 16 01:45:10 2008 -0600
23500 85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
23502 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23504 commit 7232a2724ccc9dcbc3ec4ef84ada02f13ccd1238
23505 Author: Kumar Gala <galak@kernel.crashing.org>
23506 Date: Wed Jan 16 01:32:06 2008 -0600
23508 85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
23510 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23512 commit 4bcae9c92aee0d72a2f19b81cab27ef38107ce75
23513 Author: Kumar Gala <galak@kernel.crashing.org>
23514 Date: Wed Jan 16 01:16:16 2008 -0600
23516 85xx: convert MPC8544 DS over to use new LAW init code
23518 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23520 commit 83d40dfd79fe868796275802f60116d84b9e4395
23521 Author: Kumar Gala <galak@kernel.crashing.org>
23522 Date: Wed Jan 16 01:13:58 2008 -0600
23524 85xx: Move LAW init code into C
23526 Move the initialization of the LAWs into C code and provide an API
23527 to allow modification of LAWs after init.
23529 Board code is responsible to provide a law_table and num_law_entries.
23531 We should be able to use the same code on 86xx as well.
23533 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23535 commit bed8ce838a609aaab136d43b25e6df2a520bc854
23536 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23537 Date: Sat Dec 22 15:03:12 2007 +0100
23539 qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
23541 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23543 commit 0764c164fed6277d359cf132d55187ea34290114
23544 Author: Vlad Lungu <vlad@comsys.ro>
23545 Date: Wed Jan 16 19:27:51 2008 +0200
23547 MIPS:Target support for qemu -M mips
23549 With serial, NE2000, IDE support. Tested in big-endian mode.
23550 Memory size hard-coded to 128M for now, so don't play with
23553 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
23555 commit 7f52fa3c2df59e49dc2badd7c084cf2d007c438f
23556 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23557 Date: Fri Jan 11 00:01:37 2008 +0100
23559 Fix nfs command help to reflect that the serverip is optional
23561 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23562 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23564 commit b8f4162a4f7a9bee5e9d0305c17f2d34de466a9b
23565 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23566 Date: Mon Dec 10 22:32:14 2007 +0100
23568 bf537-stamp: remove already defined is_zero_ether_addr and is_multicast_ether_addr
23570 and move is_valid_ether_addr board file
23572 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
23573 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23575 commit c2f896b8fc4722e36915903e1942e138e68ce804
23576 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23577 Date: Wed Jan 16 16:13:31 2008 +0900
23579 drivers/net/rtl8139.c: rx_status should be le32_to_cpu(rx_status).
23581 rx_status on the memory is basically in LE, but needs to be handled in CPU
23582 endian. le32_to_cpu() takes up this mission. Even if on the sane hardware,
23585 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23586 Cc: Masami Komiya <mkomiya@sonare.it>
23587 Cc: Lucas Jin <lucasjin@gmail.com>
23588 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23590 commit 96a236746fe6a7b84802afb4ed31536696d34812
23591 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23592 Date: Wed Jan 16 16:12:26 2008 +0900
23594 drivers/net/rtl8139.c: Fix cache coherency issues
23596 Current driver is meant for cache coherent systems. This patch adds
23597 flush_cache() routines to support cache non-coherent systems.
23599 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23600 Cc: Masami Komiya <mkomiya@sonare.it>
23601 Cc: Lucas Jin <lucasjin@gmail.com>
23602 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23604 commit d1276c76c1e2b5035296689280ba1acb2c425104
23605 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23606 Date: Wed Jan 16 16:11:14 2008 +0900
23608 drivers/net/rtl8139.c: Fix tx timeout
23610 "to = (currticks() + RTL_TIMEOUT)" has possibilities to wrap around. If it
23611 does, the condition "(currticks() < to)" becomes invalid and immediately
23612 leads to tx timeout error. This patch introduces the fine-graded udely(10)
23613 loops to ease the impact of wrapping around.
23615 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
23616 Cc: Masami Komiya <mkomiya@sonare.it>
23617 Cc: Lucas Jin <lucasjin@gmail.com>
23618 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23620 commit 18ee320ff63edbf7b27bbeb05f0e12a52302c68a
23621 Author: Dave Liu <r63238@freescale.com>
23622 Date: Fri Jan 11 18:45:28 2008 +0800
23624 TSEC: Add the support for RealTek RTL8211B PHY
23626 Add the support of RealTek RTL8211B PHY, the RTL8211B
23627 PHY only supports RGMII and MII mode.
23629 Signed-off-by: Dave Liu <daveliu@freescale.com>
23630 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23632 commit 84a3047b72b70e862b0b7a8e2058077457f89a32
23633 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23634 Date: Wed Jan 16 09:40:41 2008 +0100
23636 Remove annoying debug printout for PHY less boards.
23638 PHY less board prints out lots of "read wrong ...":
23639 read wrong value : mii_id 3,mii_reg 2, base e0102320
23640 read wrong value : mii_id 3,mii_reg 3, base e0102320
23641 UEC: PHY is Generic MII (ffffffff)
23642 read wrong value : mii_id 3,mii_reg 4, base e0102320
23643 read wrong value : mii_id 3,mii_reg 0, base e0102320
23644 read wrong value : mii_id 3,mii_reg 1, base e0102320
23645 read wrong value : mii_id 3,mii_reg 1, base e0102320
23646 read wrong value : mii_id 3,mii_reg 5, base e0102320
23647 read wrong value : mii_id 3,mii_reg 1, base e0102320
23648 read wrong value : mii_id 3,mii_reg 1, base e0102320
23649 read wrong value : mii_id 3,mii_reg 5, base e0102320
23650 FSL UEC0: Full Duplex
23651 FSL UEC0: Speed 100BT
23652 FSL UEC0: Link is up
23653 Using FSL UEC0 device
23655 Make this printout depend on UEC_VERBOSE_DEBUG and
23656 remove its definition in uec_phy.c
23658 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23659 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23661 commit ee62ed3286f83b98b7785e0318dc6379e78f7ff6
23662 Author: Kim Phillips <kim.phillips@freescale.com>
23663 Date: Tue Jan 15 14:11:00 2008 -0600
23665 net: reduce boot latency on QE UEC based boards
23667 actually polling for PHY autonegotiation to finish enables us to remove the
23668 5 second boot prompt latency present on QE based boards.
23670 call to qe_set_mii_clk_src in init_phy, and mv call to init_phy from
23671 uec_initialize to uec_init by Joakim Tjernlund; autonegotiation wait
23672 code shamelessly stolen from tsec driver.
23674 also rm unused CONFIG_RMII_MODE code.
23676 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23677 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
23678 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23680 commit 55fe7c57a8b99a130925052dcdbb77f053dc50e3
23681 Author: michael.firth@bt.com <michael.firth@bt.com>
23682 Date: Wed Jan 16 11:40:51 2008 +0000
23684 TSEC driver: Change MDIO support to allow access to any PHYs on the MDIO bus
23686 The current TSEC driver limits MDIO access to the devices that have been configured as attached
23687 to a TSEC MAC. This patch allows access to any PHY device on the MDIO bus through the 'mii' commands.
23689 Signed-off-by: Michael Firth <michael.firth@bt.com>
23690 Acked-by: Andy Fleming <afleming@freescale.com>
23691 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23693 commit 5e918a98c26e8ab9b5d2d48d998a2ced2b5b85b3
23694 Author: Kim Phillips <kim.phillips@freescale.com>
23695 Date: Wed Jan 16 00:38:05 2008 -0600
23697 Add support for the MPC837xERDB
23699 MPC837xERDB board support includes:
23700 * DDR2 330MHz hardcoded (soldered on the board)
23701 * Local Bus NOR Flash
23702 * I2C, UART and RTC
23703 * eTSEC RGMII (TSEC0 - RTL8211B with MII;
23704 * TSEC1 - VSC7385 local bus, hardcoded, requires seperate firmware
23707 Signed-off-by: Kevin Lam <kevin.lam@freescale.com>
23708 Signed-off-by: Joe D'Abbraccio <joe.d'abbraccio@freescale.com>
23709 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23711 commit 9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
23712 Author: Kim Phillips <kim.phillips@freescale.com>
23713 Date: Wed Jan 16 12:06:16 2008 -0600
23715 mpc83xx: add support for more system clock performance controls
23717 System registers that are modified are the Arbiter Configuration
23718 Register (ACR), the System Priority Control Register (SPCR), and the
23719 System Clock Configuration Register (SCCR).
23721 Signed-off by: Michael F. Reiss <Michael.F.Reiss@freescale.com>
23722 Signed-off by: Joe D'Abbraccio <ljd015@freescale.com>
23723 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23725 commit 16c3cde050e2d243e62b37486f1558570787beb8
23726 Author: James Yang <james.yang@freescale.com>
23727 Date: Wed Jan 16 11:58:08 2008 -0600
23729 FSL: Generalize PIXIS reset command parsing.
23731 Before, the order of arguments to the pixis_reset
23732 command needed to be supplied in a hard-coded order.
23733 Generalize the command parsing to allow any order.
23735 Signed-off-by: James Yang <james.yang@freescale.com>
23736 Acked-by: Jon Loeliger <jdl@freescale.com>
23738 commit ad8f8687b78c3e917b173f038926695383c55555
23739 Author: Jon Loeliger <jdl@freescale.com>
23740 Date: Tue Jan 15 13:42:41 2008 -0600
23742 FSL: Convert board/freescale/common/Makefile to use CONFIG_
23744 Convert the board/freescale/common/Makefile to use
23745 CONFIG_* options to select which files to conditionally
23746 compile into the board/freescale/common library rather
23747 than conditionally compiling entire files.
23754 CONFIG_ID_EEPROM is introduced until CFG_ID_EEPROM is gone.
23756 Signed-off-by: Jon Loeliger <jdl@freescale.com>
23758 commit 7c2221eb230372a9e537c4f6636b147b0909325f
23759 Author: Roy Zang <tie-fei.zang@freescale.com>
23760 Date: Tue Jan 15 16:38:38 2008 +0800
23762 Use CONFIG_ULI526X as MPC8610HPCD default Ethernet driver
23764 Use driver/net/uli526x.c as MPC8610HPCD default Ethernet driver.
23765 Remove unused ethernet CONFIG_ options.
23767 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
23768 Acked-by: Jon Loeliger <jdl@freescale.com>
23770 commit 711a7946277d2e29af481011e8635e9975c54e45
23771 Author: Kim Phillips <kim.phillips@freescale.com>
23772 Date: Tue Jan 15 14:05:14 2008 -0600
23774 mpc83xx: fix QE ETHPRIMEs to correct 'FSL UEC0' value
23776 continuation of commit b96c83d4ae475a70ef2635cd0e748174c44c8601
23778 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23780 commit 363eea9ff7f19a2cba17f262bd17559f166e134e
23781 Author: Kim Phillips <kim.phillips@freescale.com>
23782 Date: Tue Jan 15 09:51:12 2008 -0600
23784 mpc83xx: clean up mpc8360emds.c warnings
23786 mpc8360emds.c: In function 'ft_board_setup':
23787 mpc8360emds.c:327: warning: assignment makes pointer from integer without a cast
23788 mpc8360emds.c:329: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
23789 mpc8360emds.c:334: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
23790 mpc8360emds.c:341: warning: assignment makes pointer from integer without a cast
23791 mpc8360emds.c:343: warning: passing argument 2 of 'fdt_getprop' makes integer from pointer without a cast
23792 mpc8360emds.c:348: warning: passing argument 2 of 'fdt_setprop' makes integer from pointer without a cast
23794 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23796 commit f09880ea72a1c806db223ce594c5fb1b6542ff6a
23797 Author: Kim Phillips <kim.phillips@freescale.com>
23798 Date: Mon Jan 14 16:14:46 2008 -0600
23800 mpc83xx: fix phy-connection-type fixup code
23802 use tree passed to us in local blob, not global fdt.
23804 Also use fdt_path_offset to convert to relative offset, since absolute
23805 reference is needed to check for rgmii-id mode string value.
23807 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23809 commit 2b4c952be7c4357a13e839d48df80853820c33eb
23810 Author: Kumar Gala <galak@kernel.crashing.org>
23811 Date: Mon Jan 14 09:01:40 2008 -0600
23813 mpc83xx: fix mpc8313/mpc8315/mpc8349itx Makefiles for silent build (with -s)
23815 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
23816 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23818 commit e1d8ed2c08da14b168658cc5fa78529d461aea70
23819 Author: Poonam Aggrwal <b10812@freescale.com>
23820 Date: Mon Jan 14 09:41:14 2008 +0530
23822 Changes in uboot DDR configuration for MPC8313eRDB
23824 These changes were identified by HighSmith Bill ,Mazzyar and Joseph for
23825 DDR configuration in u-boot code. Some are related to performance, some
23826 affect stability and some correct few basic errors in the current
23829 The changes have been tested and found to give better memory latency
23830 figures on MPC8313eRDB.LMBench figures prove it.
23834 - CS0_CONFIG[ AP_n_EN] is changed from 1 to 0
23835 (this may improve performance for application with many read
23836 or write to open pages).
23837 - CS0_CONFIG[ODT_WR_CFG] is currently changed from 100 to
23838 001 (activating all the CS when only one is used may cause
23839 unwanted noise on the system)
23841 - TIMING_CFG_1[ACTTOPRE] is changed from 9clks to 8clks (based on
23843 - TIMING_CFG_1[REFREC] changed from 21 clks to 18clks.
23845 - TIMING_CFG_2[AL] value changed from 0 setting to 1 clk to
23846 comply with the 3 ODT clk requirements)
23847 - TIMING_CFG_2[CPO] was set to a reserved value, changed to RL+3/4.
23848 - TIMING_CFG_2[FOUR_ACT] is changed from 10 clks to 6clks.
23850 - DDR_SDRAM_MODE[AL]changed from 0 to 1.
23851 - DDR_SDRAM_MODE[WRREC] changed from 1 clk to 3 clks.
23853 - DDR_SDRAM_INTERVAL[REFINT] is changed from 0x0320 to 0x0510.
23854 - DDR_SDRAM_INTERVAL[BSTOPRE] is changed from 0x64 to 0x0500.
23856 The patch is based of git://www.denx.de/git/u-boot-mpc83xx.git
23857 The last commit on this tree was 6775c68683a53c7abc778774641aac6f833a2cbf
23859 Signed-off-by: Poonam Aggrwal-b10812 <b10812@freescale.com>
23860 Cc: Bill HighSmith <Bill.Highsmith@freescale.com>
23861 Cc: Razzaz Mazyar <MRazzaz@freescale.com>
23862 Cc: Josep P J <PJ.Joseph@freescale.com>
23863 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23865 commit b5cdd7df4a06edb91539c9a2ea7c178a870c3a95
23866 Author: Jerry Van Baren <gvb.uboot@gmail.com>
23867 Date: Sat Jan 12 13:24:14 2008 -0500
23869 Enable the isdram command on the MPC8360EMDS board
23871 The isdram command prints out decoded information the "serial presence
23872 detect" (SPD) chip on the SDRAM SIMMs. This can be very helpful when
23873 debugging memory configuration problems.
23875 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
23876 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23878 commit 8bd522ce4afda3d4868ee8c913f5394094326be1
23879 Author: Dave Liu <r63238@freescale.com>
23880 Date: Fri Jan 11 18:48:24 2008 +0800
23882 mpc83xx: Add the support for MPC8315ERDB board
23885 - Boot from NOR Flash
23886 - DDR2 266MHz hardcoded configuration
23887 - Local bus NOR Flash R/W operation
23888 - I2C, UART, MII and RTC
23892 Signed-off-by: Dave Liu <daveliu@freescale.com>
23893 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23895 commit b05884efa614e4d8a9413158fc228e0dc02ab704
23896 Author: Dave Liu <r63238@freescale.com>
23897 Date: Fri Jan 11 18:46:50 2008 +0800
23899 mpc83xx: Add config of eTSEC emergency priority in SPCR
23901 The TSEC emergency priority definition of 831x/837x
23902 is different than the definition of 834x in SPCR register.
23904 Add the other config of TSEC emergency priority into
23907 Signed-off-by: Dave Liu <daveliu@freescale.com>
23908 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23910 commit 9b958234b0783f13d92f007f753fd2c3ae2c8680
23911 Author: Dave Liu <r63238@freescale.com>
23912 Date: Fri Jan 11 18:42:19 2008 +0800
23914 mpc83xx: Remove cache config from MPC8360ERDK.h
23916 The MPC8360ERDK board support patch is added before
23917 the commit 2c5b48fc205c3e2752910da8f39209ed075929e5
23918 so, miss clean up it.
23920 The patch clean up the miss cache config.
23922 Signed-off-by: Dave Liu <daveliu@freescale.com>
23923 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
23925 commit cd9d23053d435c08fc8695017b5cb9003fcda786
23926 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
23927 Date: Mon Jan 14 23:09:32 2008 +0300
23929 nand: FSL UPM NAND driver
23931 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
23933 commit 6cb2239ae76faee64434286c4f8fc71374702dd2
23934 Author: Kyungmin Park <kmpark@infradead.org>
23935 Date: Tue Jan 15 08:59:44 2008 +0900
23937 OneNAND: Separate U-Boot dependent code from OneNAND
23939 OneNAND: Separate U-Boot dependent code from OneNAND
23941 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
23943 commit 83a49c8dd7998be2d1f0d420597a36bbf0bf4164
23944 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23945 Date: Wed Jan 16 10:33:46 2008 +0100
23947 ppc4xx: Sequoia coding style cleanup and beautification
23949 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
23951 commit 4b3cc6ece9c455504cf12909fae38d085d848ac0
23952 Author: Larry Johnson <lrj@acm.org>
23953 Date: Tue Jan 15 14:35:58 2008 -0500
23955 ppc4xx: Refactor ECC POST for AMCC Denali core
23957 The ECC POST reported intermittent failures running after power-up on
23958 the Korat PPC440EPx board. Even when the test passed, the debugging
23959 output occasionally reported additional unexpected ECC errors.
23961 This refactoring has three main objectives: (1) minimize the code
23962 executed with ECC enabled during the tests, (2) add more checking of the
23963 results so any unexpected ECC errors would cause the test to fail, and
23964 (3) use synchronization (only) where required by the processor.
23966 Signed-off-by: Larry Johnson <lrj@acm.org>
23968 commit 2465665b73ac2f688af945b1ed510752afa816a4
23969 Author: David Saada <David.Saada@ecitele.com>
23970 Date: Tue Jan 15 10:40:24 2008 +0200
23972 QE UEC: Extend number of supported UECs to 4
23974 This patch extends the number of supported UECs to 4. Note that the
23975 problem of QE thread resources exhaustion is resolved by setting the
23976 correct number of QE threads according to Ethernet type (GBE or FE).
23978 Signed-off-by: David Saada <david.saada@ecitele.com>
23979 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
23981 commit 58d204256cb1ce1bd323847d9f644acf70a72e6a
23982 Author: Wolfgang Denk <wd@denx.de>
23983 Date: Wed Jan 16 00:01:01 2008 +0100
23985 LWMON5: enable hush shell as command line parser
23987 Signed-off-by: Wolfgang Denk <wd@denx.de>
23989 commit 66ffb1883feedddc813d8a507d060f2a940eb2b2
23990 Author: Wolfgang Denk <wd@denx.de>
23991 Date: Tue Jan 15 17:22:28 2008 +0100
23993 ADS5121: disable watchdog; enable image timestamps
23995 Signed-off-by: Wolfgang Denk <wd@denx.de>
23997 commit 2b4f778fe9d1de61d7445bae7b325340aba6968d
23998 Author: Wolfgang Denk <wd@denx.de>
23999 Date: Tue Jan 15 17:21:28 2008 +0100
24001 TK885D: fixes for bigger flash sector sizes on new modules;
24002 adjust default environment;
24003 disable SCC ethernet (not used on this board).
24005 Signed-off-by: Wolfgang Denk <wd@denx.de>
24007 commit f91d7ae5ca89acf9fa1ed1015dc078cf29581607
24008 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24009 Date: Tue Jan 15 17:48:13 2008 +0900
24011 pcmcia: Remove CONFIG_COMMANDS from marubun pcmcia driver
24013 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24015 commit 76e49aa7fb8e76cc49092c1acd53fff921e26360
24016 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24017 Date: Tue Jan 15 23:25:25 2008 +0900
24019 sh: Add support SH7710/SH7712
24021 SH7710/SH7712 of SH3 CPU are supported.
24022 SH771X is called SH-Ether, and has the Ether controller in CPU.
24023 The driver of Ether is not included in this patch.
24025 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24027 commit 63a11be68306870e04d3851ed9fa41955cdf4894
24028 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24029 Date: Tue Jan 15 23:06:17 2008 +0900
24031 sh: Add support of map_physmem() and unmap_physmem() to SuperH
24033 This patch add the support of map_physmem() and unmap_physmem()
24034 used with Common Flash Interface(CFI) driver.
24036 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24038 commit db3995fe5164ac5d630b7ecb96286a9828dfbb54
24039 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24040 Date: Wed Jan 9 14:42:27 2008 +0900
24042 sh: Add maintainer of MS7720SE to the MAINTAINER file
24044 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24046 commit dcd99e88e03d56a0aeecd42b507d2d29d20ab0e3
24047 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24048 Date: Wed Jan 9 14:39:58 2008 +0900
24050 sh: Fix board name in MS7720SE's config.mk
24052 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24054 commit c0a04d93734d768b39dbb72fb501b65614c8615d
24055 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24056 Date: Wed Jan 9 14:37:36 2008 +0900
24058 sh: Add MS7720SE to MAKEALL
24060 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24062 commit b2b5e2bb78a1ef4ae8504f5a26bfdc3293ea74ae
24063 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24064 Date: Mon Dec 3 22:58:50 2007 +0900
24066 sh: Add support for MS7720RP02 board
24068 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24069 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24070 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24072 commit 7c10c57275901939a8ece4a9ef3e7ccb7c12a0ed
24073 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24074 Date: Wed Jan 9 14:30:02 2008 +0900
24076 sh: Add support for SH7720 in serial_sh driver.
24078 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24079 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24080 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24082 commit f9913a8ee71ff14fcfc1c7fd0e6912f897e69403
24083 Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24084 Date: Mon Dec 3 22:58:45 2007 +0900
24086 sh: Add support SH3 and SH7720
24088 Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
24089 CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24090 Acked-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
24092 commit 9adfc9fb9ade64cdf1ed9ff842e4f900cbda78bd
24093 Author: Stefan Roese <sr@denx.de>
24094 Date: Tue Jan 15 10:11:02 2008 +0100
24096 ppc4xx: Remove compiler warning in cpu/ppc4xx/44x_spd_ddr2.c
24098 Signed-off-by: Stefan Roese <sr@denx.de>
24100 commit 17bef68097ab3692500a36fb31115bff7910aa99
24101 Author: Niklaus Giger <niklausgiger@gmx.ch>
24102 Date: Mon Jan 14 14:04:42 2008 +0100
24104 ppc_4xx: Fix post spr.c for PPC405
24106 post/cpu/ppc4xx/spr.c contained a few checks for registers only present
24107 for PPC440 and derivates processor.
24109 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24111 commit 06c428bcd4413014b43236e77765022071424fa6
24112 Author: Dave Liu <r63238@freescale.com>
24113 Date: Mon Jan 14 11:12:01 2008 +0800
24115 QE: fix compile warning
24117 qe.c: In function 'qe_upload_firmware':
24118 qe.c:390: warning: pointer targets in passing argument 2
24119 uec.c: In function 'uec_initialize':
24120 uec.c:1236: warning: 'uec_info' may be used uninitialized
24122 Signed-off-by: Dave Liu <daveliu@freescale.com>
24124 commit a0dd99d51efa55fe023e19c97ead92683725eb11
24125 Author: Stefan Roese <sr@denx.de>
24126 Date: Mon Jan 14 10:05:05 2008 +0100
24128 ppc4xx: Update Kilauea CPLD configuration with USB PHY reset bit
24130 Now that bit 29 is the USB PHY reset bit, update the Kilauea port
24131 to remove the USB PHY reset after powerup. The CPLD will keep the
24132 USB PHY in reset (active low) until the bit is set to 1 in
24133 board_early_init_f().
24135 Signed-off-by: Stefan Roese <sr@denx.de>
24137 commit f43ad53908f1ea83a7c26c3505bbe84382e47aad
24138 Author: Wolfgang Denk <wd@denx.de>
24139 Date: Sun Jan 13 23:26:45 2008 +0100
24141 ARM: update mach-types.h from 2.6.24-rc7 Linux kernel tree
24143 Signed-off-by: Wolfgang Denk <wd@denx.de>
24145 commit 8d103071b7b0e3ec888859bfcb9d422565e6d750
24146 Author: Wolfgang Denk <wd@denx.de>
24147 Date: Sun Jan 13 23:37:50 2008 +0100
24149 ADS5121: Fix typo in ads5121.c, adjust default environment
24151 Signed-off-by: Wolfgang Denk <wd@denx.de>
24153 commit 51b67d06faa670c65de6f29ec5b5aace74b2a047
24154 Author: John Rigby <jrigby@freescale.com>
24155 Date: Fri Aug 24 18:18:43 2007 -0600
24157 ADS5121: MAX slew rate for PATA pins
24159 Signed-off-by: John Rigby <jrigby@freescale.com>
24161 commit dd531aac34aaad138f16cacdb51d61908d59c0e2
24162 Author: Wolfgang Denk <wd@denx.de>
24163 Date: Sun Jan 13 21:05:52 2008 +0100
24165 Fix Makefile dependency problem with parallel builds.
24167 Signed-off-by: Wolfgang Denk <wd@denx.de>
24169 commit 89967841e3ea02e3d0e5e1295ab687576e5b1089
24170 Author: Wolfgang Denk <wd@denx.de>
24171 Date: Sun Jan 13 19:51:39 2008 +0100
24173 MPC8544DS: fix board Makefile for silent build (with -s)
24175 Signed-off-by: Wolfgang Denk <wd@denx.de>
24177 commit 6d714f82fb4b8bb7e267e9c71b8009bc670bfe88
24178 Author: Wolfgang Denk <wd@denx.de>
24179 Date: Sun Jan 13 16:44:08 2008 +0100
24181 PMC440 board: fix board Makefile for out-of-tree building
24183 Signed-off-by: Wolfgang Denk <wd@denx.de>
24185 commit 6eb3fb15588d319bd3099d5f9b910051dfeab6b2
24186 Author: Wolfgang Denk <wd@denx.de>
24187 Date: Sun Jan 13 16:07:44 2008 +0100
24189 Makalu: fix compile warning
24191 Signed-off-by: Wolfgang Denk <wd@denx.de>
24193 commit 0a1e03bcadc7734688a21e8dd2e46a4f608193c0
24194 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24195 Date: Sun Jan 13 12:36:12 2008 +0100
24197 cmd_nand : fix compiler warning.
24199 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24201 commit 8225d1e3ac0ab147cdde4b0042812583380afb8a
24202 Author: Michael Schwingen <rincewind@discworld.dascon.de>
24203 Date: Sat Jan 12 20:29:47 2008 +0100
24205 CFI: Fix CONFIG_FLASH_CFI_LEGACY compilation
24207 Signed-off-by: Michael Schwingen <michael@schwingen.org>
24208 Acked-by: Stefan Roese <sr@denx.de>
24210 commit 2b2f43ed6a30ece77f76191c845ac95267daa31a
24211 Author: Wolfgang Denk <wd@denx.de>
24212 Date: Sun Jan 13 02:19:44 2008 +0100
24214 MPC8360ERDK: fix incorrect initialization of CFG_I2C_NOPROBES
24216 Signed-off-by: Wolfgang Denk <wd@denx.de>
24218 commit 08e99e1dd01a3e0e3dc3a7138eb827c997e2b74d
24219 Author: Wolfgang Denk <wd@denx.de>
24220 Date: Sun Jan 13 02:19:13 2008 +0100
24222 MPC8xx FEC driver: fix compiler warning.
24224 Signed-off-by: Wolfgang Denk <wd@denx.de>
24226 commit ae6d1056d2c2e4d1266413c0ae8a6d5529ecde4b
24227 Author: Wolfgang Denk <wd@denx.de>
24228 Date: Sun Jan 13 00:59:21 2008 +0100
24230 Fix Makefile dependencies issues; allow silent build
24232 - get rid of "version" target whichdidn't really work
24233 - make autoconf.mk depend on version_autogenerated.h to make sure
24234 to rebuild files as needed
24235 - add XECHO macro to allow for silent build using "make -s"
24237 Signed-off-by: Wolfgang Denk <wd@denx.de>
24239 commit e343ab83d5135b558aa58db9be8fc7faa68d77ed
24240 Author: Wolfgang Denk <wd@denx.de>
24241 Date: Sun Jan 13 00:55:47 2008 +0100
24243 ADS5121e: fix compile warning
24245 Signed-off-by: Wolfgang Denk <wd@denx.de>
24247 commit f2b6f4610627fe3d607620e25082916a01538875
24248 Author: Wolfgang Denk <wd@denx.de>
24249 Date: Sun Jan 13 00:55:18 2008 +0100
24251 MUNICes: fix board Makefile for remote build directory
24253 Signed-off-by: Wolfgang Denk <wd@denx.de>
24255 commit 2ad4d3999fe801aa716221d7d9a4c5bdad74783a
24256 Author: Oliver Weber <almoeli@gmx.de>
24257 Date: Wed Jan 9 17:04:38 2008 +0100
24259 MPC5200: don't use hardcoded MBAR address in Bestcomm firmware
24261 Signed-off-by: Oliver Weber <almoeli@gmx.de>
24263 commit 00ac50e348d1bace27a174b7f528d113bc7cdf7f
24264 Author: Andreas Engel <andreas.engel@ericsson.com>
24265 Date: Wed Jan 9 17:10:56 2008 +0100
24267 Make bootretry work when command line editing is enabled
24269 Currently, when CONFIG_CMDLINE_EDITING is set, bootretry doesn't work.
24270 This patch fixes the problem.
24272 Signed-off-by: Andreas Engel <andreas.engel@ericsson.com>
24274 commit 632de0672d3c3ab53ad798c47f5f1eb26008a0e4
24275 Author: Larry Johnson <lrj@acm.org>
24276 Date: Fri Jan 11 23:26:18 2008 -0500
24278 Refactor code for "i2c sdram" command
24280 Signed-off-by: Larry Johnson <lrj@acm.org>
24282 commit 0df6b8446c4721b91ce311548114891130371083
24283 Author: Larry Johnson <lrj@acm.org>
24284 Date: Thu Jan 10 22:23:39 2008 -0500
24286 Fix "i2c sdram" command for DDR2 DIMMs
24288 Many of the SPD bytes for DDR2 SDRAM are not interpreted correctly by the
24289 "i2c sdram" command. This patch provides correct alternative
24290 interpretations when DDR2 memory is detected.
24292 Signed-off-by: Larry Johnson <lrj@acm.org>
24294 commit 64134f011254123618798ff77c42ba196b2ec485
24295 Author: Wolfgang Denk <wd@denx.de>
24296 Date: Sat Jan 12 20:31:39 2008 +0100
24298 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections
24300 With recent toolchain versions, some boards would not build because
24301 or errors like this one (here for ocotea board when building with
24303 ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab]
24305 For many boards, the .bss section is big enough that it wraps around
24306 at the end of the address space (0xFFFFFFFF), so the problem will not
24307 be visible unless you use a 64 bit tool chain for development. On
24308 some boards however, changes to the code size (due to different
24309 optimizations) we bail out with section overlaps like above.
24311 The fix is to add the NOLOAD attribute to the .bss and .sbss
24312 sections, telling the linker that .bss does not consume any space in
24315 Signed-off-by: Wolfgang Denk <wd@denx.de>
24317 commit 3afac79ec27b91df185f090b31dad9620779f440
24318 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
24319 Date: Fri Jan 11 20:42:58 2008 -0600
24321 USB: Add Philips 1561 PCI-OHCI ids
24322 (needed for M5475EVB)
24324 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
24326 commit 5e8def6731cd7bec74bff42a16b139de04010353
24327 Author: Wolfgang Denk <wd@denx.de>
24328 Date: Sat Jan 12 15:51:34 2008 +0100
24330 Add MAINTAINERS entries for ids8247, jupiter, municse, sc3 and uc101
24333 Signed-off-by: Heiko Schocher <hs@denx.de>
24334 Signed-off-by: Wolfgang Denk <wd@denx.de>
24336 commit 5d49e0e152a8b81cc0602271e8fd259371f559b7
24337 Author: Grzegorz Bernacki <gjb@semihalf.com>
24338 Date: Fri Jan 11 12:03:43 2008 +0100
24340 MPC512X: Cleanup bus clock names.
24342 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24344 commit 66a9455b6bf46d69cec5c88d1a600d1d9a10670d
24345 Author: Grzegorz Bernacki <gjb@semihalf.com>
24346 Date: Tue Jan 8 17:16:59 2008 +0100
24348 MPC512X: Fixed typo in macro name.
24350 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24352 commit 281ff9a45cf9eb17b8a9afc436cb783cf1f62363
24353 Author: Grzegorz Bernacki <gjb@semihalf.com>
24354 Date: Tue Jan 8 17:16:15 2008 +0100
24356 ads5121: Added support for FDT.
24358 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
24360 commit a10ff9196183e7e5f2ae3c4f5f3cbe92ae9cb719
24361 Author: Wolfgang Denk <wd@denx.de>
24362 Date: Sat Jan 12 01:05:50 2008 +0100
24364 Coding Style cleanup; update CHANGELOG.
24366 Signed-off-by: Wolfgang Denk <wd@denx.de>
24368 commit f6db945649e5e9d0c7efe33b507d243cdc86cf03
24369 Author: Heiko Schocher <hs@denx.de>
24370 Date: Fri Jan 11 15:15:17 2008 +0100
24372 Fixed syntax error in function init_e300_core() of mpc83xx/start.S if
24374 Signed-off-by: Timur Tabi <timur@freescale.com>
24375 Signed-off-by: Heiko Schocher <hs@denx.de>
24377 commit fa05664cd8c7ab1ecf062aa73b992b7b58bba49c
24378 Author: Heiko Schocher <hs@denx.de>
24379 Date: Fri Jan 11 15:15:16 2008 +0100
24381 MUNICes: Set the right CFG_DEFAULT_MBAR value.
24383 Signed-off-by: Heiko Schocher <hs@denx.de>
24385 commit 5fb2b2342ece8d786c6f7fdba1bc273febd3b3d2
24386 Author: Heiko Schocher <hs@denx.de>
24387 Date: Fri Jan 11 15:15:15 2008 +0100
24389 added the config File for the MUNICes board.
24391 Signed-off-by: Heiko Schocher <hs@denx.de>
24393 commit 6341d9d723b71b4c0bf86f979e4cb228c02fd09d
24394 Author: Heiko Schocher <hs@denx.de>
24395 Date: Fri Jan 11 15:15:14 2008 +0100
24397 added basic support for the MUNICes board.
24399 Signed-off-by: Heiko Schocher <hs@denx.de>
24401 commit 3bb77fb09a1caabf5a292cc5b486a78b977fbe19
24402 Author: Wolfgang Denk <wd@denx.de>
24403 Date: Sat Jan 12 00:39:37 2008 +0100
24405 Update CHANGELOG and MAINTAINERS files.
24407 Signed-off-by: Wolfgang Denk <wd@denx.de>
24409 commit 5ba7390c3cb579172be66888a371707b47b5be4e
24410 Author: Anatolij Gustschin <agust@denx.de>
24411 Date: Fri Jan 11 02:15:02 2008 +0100
24413 Fix compilation problem in common/cmd_bmp.c
24415 common/cmd_bmp.c fails to compile if CONFIG_VIDEO_BMP_GZIP
24416 isn't defined. This patch fix this.
24418 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24420 commit 5aa437baae5fe629abeab99bef793a2a1fc71b58
24421 Author: Heiko Schocher <hs@denx.de>
24422 Date: Fri Jan 11 01:12:09 2008 +0100
24424 Fix defaultconfig for the mgcoge board.
24426 Signed-off-by: Heiko Schocher <hs@denx.de>
24428 commit ac9db066b26935f31bff15c98168b19faeb603f3
24429 Author: Heiko Schocher <hs@denx.de>
24430 Date: Fri Jan 11 01:12:08 2008 +0100
24432 Added support for the mgcoge board from keymile.
24434 Signed-off-by: Heiko Schocher <hs@denx.de>
24436 commit b423d055cc2e13c4ef1f0389c3fa2988d0eed818
24437 Author: Heiko Schocher <hs@denx.de>
24438 Date: Fri Jan 11 01:12:07 2008 +0100
24440 Enable SMC microcode relocation patch for SMC1.
24442 Signed-off-by: Heiko Schocher <hs@denx.de>
24444 commit 381e4e639720d8d2efb8066c7c48ec9588cb28c7
24445 Author: Heiko Schocher <hs@denx.de>
24446 Date: Fri Jan 11 01:12:06 2008 +0100
24448 Added support for the mgsuvd board from keymile.
24450 Signed-off-by: Heiko Schocher <hs@denx.de>
24452 commit bf05293973b348f6946c9df92cd3c65ece42d0be
24453 Author: James Yang <james.yang@freescale.com>
24454 Date: Thu Jan 10 16:02:07 2008 -0600
24456 Fix 64-bit vsprintf.
24458 There were some size and unsigned problems.
24459 Also add support for "ll" size modifier in format string like glibc
24461 Signed-off-by: James Yang <James.Yang@freescale.com>
24462 Acked-by: Jon Loeliger <jdl@freescale.com>
24464 commit 92fa37eac530860643afa26ae347af3d23d67309
24465 Author: Larry Johnson <lrj@acm.org>
24466 Date: Wed Jan 9 12:42:35 2008 -0500
24468 Remove superfluous preprocessor conditionals from LM73 driver
24470 (1) Remove unused symbol "CFG_EEPROM_PAGE_WRITE_ENABLE".
24472 (2) Use conditional Makefile.o.
24474 Signed-off-by: Larry Johnson <lrj@acm.org>
24476 commit efc6f447c1b940d1650c4b854c5598a595ddc3da
24477 Author: Guennadi Liakhovetski <lg@denx.de>
24478 Date: Thu Jan 10 17:59:07 2008 +0100
24480 Add support for the TK885D baseboard from TELE-DATA
24482 The TK885D board uses a TQM885D module from TQ, this port adds an
24483 own configuration file and adds a last_stage_init() method to
24484 configure the two PHYs, depending on the phy_auto_nego environment
24487 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
24489 commit 0ec595243dc99edcd248bbcfbfd5a1dc860bde89
24490 Author: Kumar Gala <galak@kernel.crashing.org>
24491 Date: Thu Jan 10 02:22:05 2008 -0600
24493 Fix compiler warning
24495 main.c: In function 'readline_into_buffer':
24496 main.c:927: warning: unused variable 'p_buf'
24498 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24500 commit bed53753dd1d7e6bcbea4339be0fb7760214cc35
24501 Author: Anatolij Gustschin <agust@denx.de>
24502 Date: Fri Jan 11 14:30:01 2008 +0100
24504 Add Fujitsu CoralP/Lime video driver
24506 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24507 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24509 commit 20c450ef61ef2eb1c96f9b59ba0eb8d849bba058
24510 Author: Anatolij Gustschin <agust@denx.de>
24511 Date: Fri Jan 11 02:39:47 2008 +0100
24513 Fix video console newline and carriage return handling
24515 Lines of the lenght CONSOLE_COLS or greater than CONSOLE_COLS
24516 are not displayed correctly. This is an attempt to fix
24517 this issue. Also add carriage return handling.
24519 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24520 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
24522 commit d5a163d6baa04f5a8edcc10ebc6fad08657d3093
24523 Author: Stefan Roese <sr@denx.de>
24524 Date: Fri Jan 11 15:53:58 2008 +0100
24526 ppc4xx: Fix sdram init on Sequoia boards
24528 Clear possible errors in MCSR resulting from data-eye-search.
24529 If not done, then we could get an interrupt later on when
24530 exceptions are enabled.
24532 Signed-off-by: Stefan Roese <sr@denx.de>
24534 commit d610a60730b7464f6f659db49d264d89a7c71061
24535 Author: Anatolij Gustschin <agust@denx.de>
24536 Date: Fri Jan 11 15:31:09 2008 +0100
24538 ppc4xx: Rework Lime support for lwmon5
24540 Rework Lime support for lwmon5 using new video driver
24542 Signed-off-by: Anatolij Gustschin <agust@denx.de>
24544 commit ff41ffc93c1592e77a44bdbebd5d781739f3aae0
24545 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24546 Date: Fri Jan 11 14:55:16 2008 +0100
24548 ppc4xx: Update PMC440 config file
24550 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24552 commit e3edcb36f14f0aabb6f50e96014d6877f73d64ea
24553 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24554 Date: Fri Jan 11 14:55:08 2008 +0100
24556 ppx4xx: Fix sdram init on PMC440 boards
24558 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
24560 commit 061aad4d320dddce26247699dcf2875ee2ea1366
24561 Author: Dave Liu <r63238@freescale.com>
24562 Date: Thu Jan 10 23:09:33 2008 +0800
24564 mpc83xx: Fix the bug of 266MHz data rate DDR
24566 The DDR doesn't work on the 266MHz data rate,
24567 the patch fix the bug.
24569 Signed-off-by: Dave Liu <daveliu@freescale.com>
24570 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24572 commit ded08317ad9e340b887bf2eb46e9565a0f610a93
24573 Author: Dave Liu <r63238@freescale.com>
24574 Date: Thu Jan 10 23:08:26 2008 +0800
24576 mpc83xx: Make the code more readable
24578 Format the code, make it more readable
24580 Signed-off-by: Dave Liu <daveliu@freescale.com>
24581 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24583 commit 7e74d63d1a211fbc34ec424e2dc6726601f323d0
24584 Author: Dave Liu <r63238@freescale.com>
24585 Date: Thu Jan 10 23:07:23 2008 +0800
24587 mpc83xx: Reduce the latency of DDR
24589 Reduce the AL from 2 to 1 clock to improve the performance.
24591 Signed-off-by: Dave Liu <daveliu@freescale.com>
24592 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24594 commit 6f3931a2bed5412c20d5e5536c865fbd657f7d28
24595 Author: Dave Liu <r63238@freescale.com>
24596 Date: Thu Jan 10 23:06:05 2008 +0800
24598 mpc83xx: Fix the wrong definition of MPC8315E
24600 According to the latest user manual of MPC8315E,
24601 1) The SVCOD of HRCWL is different than 837x
24602 2) The SCCR has changes
24604 Signed-off-by: Dave Liu <daveliu@freescale.com>
24605 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24607 commit ec2638ea08a537a1bd409db873aaaa33a053ebae
24608 Author: Dave Liu <r63238@freescale.com>
24609 Date: Thu Jan 10 23:05:00 2008 +0800
24611 mpc83xx: Fix the typo in mpc83xx.h
24613 The SPCR about TSEC priority is wrong.
24615 Signed-off-by: Michael Barkowski <Michael.Barkowski@freescale.com>
24616 Signed-off-by: Joe D'Abbraccio <Joe.D'abbraccio@freescale.com>
24617 Signed-off-by: Dave Liu <daveliu@freescale.com>
24618 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24620 commit c86ef2cd9ef81935049231fa89f36c7b793f2d4b
24621 Author: Dave Liu <r63238@freescale.com>
24622 Date: Thu Jan 10 23:04:13 2008 +0800
24624 mpc83xx: Fix the typo in global data struct
24626 Fix the typo in global_data.h
24628 Signed-off-by: Dave Liu <daveliu@freescale.com>
24629 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24631 commit 2c5b48fc205c3e2752910da8f39209ed075929e5
24632 Author: Dave Liu <r63238@freescale.com>
24633 Date: Thu Jan 10 23:03:03 2008 +0800
24635 mpc83xx: Remove cache config from config.h
24637 clean up the cache config from configs.h of board
24639 Signed-off-by: Dave Liu <daveliu@freescale.com>
24640 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24642 commit fab6f556bbbbd1bb35a5433161f7f173c18df559
24643 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24644 Date: Wed Jan 9 20:57:47 2008 +0300
24646 mpc83xx: add support for the MPC8360E-RDK
24648 This is MPC8360E based board with:
24649 - 256MB fixed SDRAM;
24650 - 8MB Intel Strata NOR flash;
24651 - StMICRO 64MiB NAND flash;
24652 - two 10/100/1000 ethernet ports connected via Broadcom
24654 - two 10/100 ethernet ports connected via National
24656 - one PCI and one miniPCI slots;
24657 - four serial ports (two NS16550-compatible, two UCCs);
24658 - four USB ports working through MPC8360E "FHCI" USB controller;
24659 - Fujitsu MB86277 graphics controller;
24660 - Analog to Digital Converter/Touchscreen controller, AD7843
24663 Features not supported in this patch are:
24664 - StMICRO 64MiB NAND flash (patch sent);
24665 - MINT framebuffer initialization (patch is pending);
24666 - Fetching production information from the EEPROM via I2C;
24668 - Two slow UCCs used as RS-485 UARTs.
24670 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24671 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24673 commit b3d2cde7a3aa1e83b7968cdff929e52c8cc617bb
24674 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24675 Date: Wed Jan 9 20:57:40 2008 +0300
24677 mpc83xx: add "fsl, qe" compatible fixups
24679 New device trees will use "fsl,qe" compatible properties.
24681 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24682 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24684 commit 977b57583a7c34010e566a09a679ec3c1836f996
24685 Author: Kim Phillips <kim.phillips@freescale.com>
24686 Date: Wed Jan 9 15:24:06 2008 -0600
24688 mpc83xx: add missing CONFIG_HAS_ETH0 defines
24690 the new libfdt code only updates eth0 if CONFIG_HAS_ETH0
24691 is defined; add the define to the missing board configs.
24693 Thanks to Emilian Medve for finding this.
24695 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24697 commit b830b7f1635984ba607219fcbd78597c28eeb529
24698 Author: Becky Bruce <bgill@freescale.com>
24699 Date: Thu Jan 10 14:00:28 2008 -0600
24701 86xx: Support 2GB DIMMs
24703 Configure the number of bits used to address the banks inside the SDRAM
24704 device. The default register value of 0 means 2 bits to address 4 banks.
24705 Higher capacity devices like a 2GB DIMM require 3 bits to address 8 banks.
24707 Signed-off-by: Becky Bruce <bgill@freescale.com>
24709 commit 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
24710 Author: Niklaus Giger <niklausgiger@gmx.ch>
24711 Date: Thu Jan 10 18:50:33 2008 +0100
24713 ppc4xx: Make Sequoia boot vxWorks
24716 TLB 0 a entry for the Machine Check interrupt
24717 TLB 1 a entry for the RAM
24718 TLB 2 a entry for the EBC
24719 TLB 3 a entry for the boot flash
24721 After changing the baudrate to 9600 I had no problems to boot the
24722 vxWorks image as distributed by WindRiver (Revision 2.0/1 from
24725 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
24727 commit 6d8184b00c0d1d7090e4a2f514e310d98a394f8d
24728 Author: Larry Johnson <lrj@arlinx.com>
24729 Date: Wed Jan 9 23:10:27 2008 -0500
24731 ppc4xx: Fix dflush() to restore DVLIM register
24733 Signed-off-by: Larry Johnson <lrj@acm.org>
24735 commit 252f60b068d1f94190b5bcfda169db582387e15e
24736 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24737 Date: Thu Jan 10 03:52:44 2008 -0500
24739 Nios2: remove common/cmd_bdinfo.c unused variable.
24741 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24742 Signed-off-by: Scott McNutt <smcnutt@psyent.com>
24744 commit 422b1a01602b6e2fbf8444a1192c7ba31461fd4c
24745 Author: Ben Warren <biggerbadderben@gmail.com>
24746 Date: Wed Jan 9 18:15:53 2008 -0500
24748 Fix Ethernet init() return codes
24750 Change return values of init() functions in all Ethernet drivers to conform
24756 All drivers going forward should return 0 on success. Current drivers that
24757 return 1 on success were left as-is to minimize changes.
24759 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
24760 Acked-by: Stefan Roese <sr@denx.de>
24761 Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
24762 Acked-by: Kim Phillips <kim.phillips@freescale.com>
24763 Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
24764 Acked-By: Timur Tabi <timur@freescale.com>
24766 commit d3a6532cbe263d992f49e86ac95bede28e96f9c8
24767 Author: Wolfgang Denk <wd@denx.de>
24768 Date: Thu Jan 10 00:55:14 2008 +0100
24770 Coding Style cleanup; update CHANGELOG
24772 Signed-off-by: Wolfgang Denk <wd@denx.de>
24774 commit 17a41e4492121ccf9fa2c10c2cb1a6d1c18d74f7
24775 Author: Kim Phillips <kim.phillips@freescale.com>
24776 Date: Wed Jan 9 16:56:54 2008 -0600
24778 Add QE brg freq and correct qe bus freq fdt update code
24780 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
24781 Signed-off-by: Andy Fleming <afleming@freescale.com>
24783 commit 890dfef06c2d169a3356359596890754dfb8ee1c
24784 Author: Andy Fleming <afleming@freescale.com>
24785 Date: Wed Jan 9 16:34:51 2008 -0600
24787 Remove cache config from ATUM8548 and sbc8548 configs
24789 These boards weren't updated by Kumar's config patch because they
24790 weren't in the tree, yet.
24792 Signed-off-by: Andy Fleming <afleming@freescale.com>
24794 commit b8ec2385038c094b07ec5b49336289a46b6e9cc6
24795 Author: Timur Tabi <timur@freescale.com>
24796 Date: Mon Jan 7 13:31:19 2008 -0600
24798 85xx: add ability to upload QE firmware
24800 Define the layout of a binary blob that contains a QE firmware and instructions
24801 on how to upload it. Add function qe_upload_firmware() to parse the blob and
24802 perform the actual upload. Add command-line command "qe fw" to take a firmware
24803 blob in memory and upload it. Update ft_cpu_setup() on 85xx to create the
24804 'firmware' device tree node if U-Boot has uploaded a firmware. Fully define
24805 'struct rsp' in immap_qe.h to include the actual RISC Special Registers.
24807 Signed-off-by: Timur Tabi <timur@freescale.com>
24809 commit b009f3eca99bb7b9e6ba6639a8909a138dd5e9fe
24810 Author: Kumar Gala <galak@kernel.crashing.org>
24811 Date: Tue Jan 8 01:22:21 2008 -0600
24813 85xx: Remove cache config from configs.h
24815 Either use the standard defines in asm/cache.h or grab the information
24816 at runtime from the L1CFG SPR.
24818 Also, minor cleanup in cache.h to make the code a bit more readable.
24820 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24822 commit b964e9368f45372aaf1da0c13fe56f6d81ae8e96
24823 Author: robert lazarski <robertlazarski@gmail.com>
24824 Date: Fri Dec 21 10:39:27 2007 -0500
24826 mpc85xx: Add support for ATUM8548 (updated)
24828 Add support for Instituto Atlantico's ATUM8548 board
24830 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
24831 Signed-off-by: Andy Fleming <afleming@freescale.com>
24833 commit 7bd6104b71de9bca80ac8e0936003443bb42f2fc
24834 Author: robert lazarski <robertlazarski@gmail.com>
24835 Date: Fri Dec 21 10:36:37 2007 -0500
24837 mpc85xx: Add support for ATUM8548 (updated)
24839 Add support for Instituto Atlantico's ATUM8548 board
24841 Signed-off-by: robert lazarski <robertlazarski@gmail.com>
24843 commit 9e3ed392d2c8965e24c942b58796c31c644c2f70
24844 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
24845 Date: Thu Dec 13 06:45:14 2007 -0600
24847 mpc85xx: Add support for SBC8548 (updated)
24849 Add support for Wind River's SBC8548 reference board.
24851 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
24853 commit 11c45ebd46d6517b51b7a92dd52a618b2f4e5586
24854 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
24855 Date: Thu Dec 13 06:45:08 2007 -0600
24857 mpc85xx: Add support for SBC8548 (updated)
24859 Add support for Wind River's SBC8548 reference board.
24861 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
24862 Signed-off by: Andy Fleming <afleming@freescale.com>
24864 commit 64d4bcb087c2ece1c4d0de8efe85e0075e5b1594
24865 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24866 Date: Mon Oct 22 19:58:19 2007 +0400
24868 MPC8568E-MDS: set up QE pario for UART1
24870 To use UART1 on the MPC8568E-MDS, QE pario pins PC[0:3] should
24871 be set up appropriately.
24873 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24875 commit ad162249cb371e9e38971676f09be791e5f3cf4a
24876 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
24877 Date: Mon Oct 22 18:12:46 2007 +0400
24879 MPC8568E-MDS: reset UCCs to use them reliably
24881 In order to use GETH1 and GETH2 on the MPC8568E-MDS, we should reset
24884 p.s Similar code exists in the Linux kernel board file (for capability
24885 reasons with older U-Boots), but should be removed some day.
24887 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
24889 commit 2146cf56821c3364786ca94a7306008c5824b238
24890 Author: Kumar Gala <galak@kernel.crashing.org>
24891 Date: Wed Dec 19 01:18:15 2007 -0600
24893 Reworked FSL Book-E TLB macros to be more readable
24895 The old macros made it difficult to know what WIMGE and perm bits
24896 were set for a TLB entry. Actually use the bit masks for these items
24897 since they are only a single bit.
24899 Also moved the macros into mmu.h out of e500.h since they aren't specific
24902 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24904 commit 1d47273d46925929f8f2c1913cd96d7257aade88
24905 Author: Kumar Gala <galak@kernel.crashing.org>
24906 Date: Tue Dec 18 23:21:51 2007 -0600
24908 Use FSL Book-E MMU macros from Linux Kernel
24910 Grab the FSL Book-E MAS register macros from Linux. Also added
24911 defines for page sizes up to 4TB and removed SHAREN since it doesnt
24914 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
24916 commit 02df4a270f817ef6ec39047a01b55fecdc5f3b37
24917 Author: Andy Fleming <afleming@freescale.com>
24918 Date: Wed Jan 9 13:51:32 2008 -0600
24920 Fix my own merge stupidity
24922 Way back in August I merged Heiko's patch:
24923 566a494f592: [PCS440EP] upgrade the PCS440EP board
24925 with Jon's CONFIG_COMMANDS patches.
24927 This was done in commit: 6bf6f114dcdd97ec3f80c2761ed40e31229d6b78
24929 However, in the process, I left out some of Heiko's good changes.
24931 Now Heiko's and Jon's patches are properly merged in fat_register_device()
24933 Signed-off-by: Andy Fleming <afleming@freescale.com>
24935 commit 6636b62a6efc7f14e6e788788631ae7a7fca4537
24936 Author: James Yang <James.Yang@freescale.com>
24937 Date: Wed Jan 9 11:17:49 2008 -0600
24939 Expose parse_line() globally.
24941 Add new function readline_into_buffer() that allows the
24942 output of readline to be put into a pointer to char buffer.
24944 This refactoring allows other functions besides the
24945 main command loop to also use the same input mechanism.
24947 Signed-off-by: James Yang <James.Yang@freescale.com>
24948 Acked-by: Jon Loeliger <jdl@freescale.com>
24950 commit 7ca90513486abd4ae50bd1b7403f47cc58c5ad25
24951 Author: Guennadi Liakhovetski <lg@denx.de>
24952 Date: Wed Jan 9 01:15:25 2008 +0100
24954 trivial: fix consequences of a bad merge
24956 Fix what looks like a merge artifact.
24958 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
24960 commit 4785a694c0045996ccf0ac5b8edf531efc1b730e
24961 Author: Zhang Wei <wei.zhang@freescale.com>
24962 Date: Thu Jan 3 10:51:15 2008 +0800
24964 Add Ctrl combo key support to usb keyboard driver.
24966 Ctrl combo key support is added, which is very useful to input Ctrl-C
24967 for interrupt current job.
24968 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
24969 key input when tstc() is called.
24971 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
24973 commit 10c7382bc5d5e64c47f94ac2ca78cc574442e82d
24974 Author: Marcel Ziswiler <marcel@ziswiler.com>
24975 Date: Sun Dec 30 03:30:56 2007 +0100
24977 fix various comments
24979 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24981 commit 7817cb2083d982923752fe0f12b67c0e7c09a027
24982 Author: Marcel Ziswiler <marcel@ziswiler.com>
24983 Date: Sun Dec 30 03:30:46 2007 +0100
24985 fix comments with new drivers organization
24987 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
24989 commit a9b410dc7d2a4721c408b13abfc037988150f145
24990 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
24991 Date: Fri Dec 28 12:50:59 2007 +0900
24993 Remove the obsolete terse version of do_mii()
24995 We now have more useful version of do_mii() and everybody use it.
24996 Gerald Van Baren says:
24998 > When I originally wrote the mii command 6(!) years ago, I wrote a
24999 > verbose version that printed human readable decomposition of the flags,
25000 > etc., and a terse one that didn't print as much stuff and thus had a
25001 > smaller memory footprint.
25003 > It sounds like the terse version has withered and died, apparently
25004 > people are only using the verbose version (which is very understandable,
25007 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25008 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25010 commit 01c687aa6e065bd4faf80f723361e798941dd6b0
25011 Author: Mike Frysinger <vapier@gentoo.org>
25012 Date: Thu Dec 27 13:42:56 2007 -0500
25014 Do not reference sha1.c when building mkimage.
25016 remove sha1.o from mkimage linking since it isn't actually used.
25018 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25020 commit b9173af73e524d37c812f210173cf83385c5171a
25021 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25022 Date: Thu Dec 27 15:39:54 2007 +0900
25024 common/cmd_mii.c: Add sanity argc check
25026 If type mii command without arguments, we suffer from uninitialized argv[]
25027 entries; for example we MIPS get stuck by TLB error.
25029 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
25031 commit 500856eb1707ed17d9204baa61dd59948d3b2899
25032 Author: Rafal Jaworowski <raj@semihalf.com>
25033 Date: Wed Jan 9 19:39:36 2008 +0100
25035 API for external applications.
25037 This is an API for external (standalone) applications running on top of
25038 U-Boot, and is meant to be more extensible and robust than the existing
25039 jumptable mechanism. It is similar to UNIX syscall approach. See api/README
25042 Included is the demo application using this new framework (api_examples).
25044 Please note this is still an experimental feature, and is turned off by
25047 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
25049 commit fe8dd0b2220b7c02b0d4c9c4f9967879970477b1
25050 Author: Jon Loeliger <jdl@freescale.com>
25051 Date: Wed Jan 9 12:14:55 2008 -0600
25053 86xx: Remove cache config from configs.h
25055 Just use the standard defines in asm/cache.h.
25057 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25059 commit 26a41790f8eba19ad450e18ae91351daf485b3e2
25060 Author: Rafal Jaworowski <raj@semihalf.com>
25061 Date: Wed Jan 9 18:05:27 2008 +0100
25063 Globalize envmatch()
25065 The newly introduced API (routines related to env vars) will need to call
25068 Signed-off-by: Rafal Zabdyr <armo@semihalf.com>
25070 commit 1df170f8b2a99e1e2f940f9f0b56511e1e4c9e1f
25071 Author: Jon Loeliger <jdl@freescale.com>
25072 Date: Fri Jan 4 12:07:27 2008 -0600
25074 Convert MPC8610HPCD to use libfdt.
25076 Assumes the presence of the aliases node in the DTS to
25077 locate the pci and serial nodes for fixups.
25079 Use consistent fdtaddr and fdtfile in environment variables.
25081 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25083 commit c9974ab0a4d3731cdb76a7599d9fe9445d764d60
25084 Author: Jon Loeliger <jdl@freescale.com>
25085 Date: Fri Jan 4 11:58:23 2008 -0600
25087 8610: Fix lingering compile warnings.
25091 Signed-off-by: Jon Loeliger <jdl@freescale.com>
25093 commit 6007f3251c0967adc13f2ed8be1b924ddc30124d
25094 Author: Wolfgang Denk <wd@denx.de>
25095 Date: Wed Jan 9 15:14:46 2008 +0100
25097 Coding Style cleanup, update CHANGELOG
25099 Signed-off-by: Wolfgang Denk <wd@denx.de>
25101 commit fc6414eca55f1fc108fb12fc8cdc43bd8b4463f9
25102 Author: Mike Frysinger <vapier@gentoo.org>
25103 Date: Tue Dec 18 04:29:55 2007 -0500
25105 fix easylogo on big endian dev systems
25107 didnt realize how out of shape easylogo actually was until i tried using it.
25108 this patch does byte swapping as need be on the input tga header since the tga
25109 is in little endian but the host could just as well be big endian. i didnt
25110 bother using bswap macros or such stuff from system headers as nothing in
25111 POSIX dictates byte swapping functionality.
25113 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25115 commit 38d299c2db81bd889c601b5dfc12c4e83ef83333
25116 Author: Mike Frysinger <vapier@gentoo.org>
25117 Date: Tue Dec 18 03:23:25 2007 -0500
25121 - make the Makefile not suck
25122 - include proper headers for prototypes
25123 - fix obvious broken handling of strchr() when handling '.' in filenames
25125 Signed-Off-By: Mike Frysinger <vapier@gentoo.org>
25127 commit 883e3925d99a8dd69c5b0201cba5b1887f88f95c
25128 Author: raptorbrino@aim.com <raptorbrino@aim.com>
25129 Date: Thu Dec 13 21:23:28 2007 -0500
25131 Fix build problems under Cygwin
25133 This patch allows u-boot to build without error in a cygwin
25134 environment. Cygwin does not define __u64 in it's
25135 include/asm/types.h file. The -idirafter flag in the u-boot
25136 build causes the inclusion of the cygwin types.h file as opposed
25137 to u-bot/include/asm/types.h file which does define __u64.
25138 Subsequently, sha1.c compile fails due to unknown symbol.
25140 Signed-off-by: Brian Miller <raptorbrino@netscape.net>
25142 commit 43ef1c381f9195504a2488f5cb909227eb97d475
25143 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
25144 Date: Fri Nov 30 17:29:59 2007 +0100
25146 cmd_bmp: Add support for displaying gzip compressed bmps
25148 The existing code can show information about a gzip compressed BMP
25149 image, but can't actually display it.
25151 Therefore, move the decompression code out of bmp_info() and use it in
25152 bmp_display() as well in order to display a compressed BMP image.
25154 Also, clean things up a bit and fix a memory leak while we're at it.
25156 [hskinnemoen@atmel.com: a bit of refactoring]
25157 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
25159 commit d197ffd8172c6fdef38733424640a9a47295d6e9
25160 Author: Guennadi Liakhovetski <lg@denx.de>
25161 Date: Thu Nov 29 21:15:56 2007 +0100
25163 Fix and optimize MII operations on FEC (MPC8xx) controllers
25165 This patch fixes several issues at least on a MPC885 based system with two
25166 FEC interfaces used in MII mode.
25168 1. PHY discovery should first read PHY_PHYIDR2 register and only then
25169 PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
25170 otherwise the values read are wrong. Also notice, that PHY discovery
25171 cannot work on MPC88x / MPC87x in setups with both FECs active at all
25172 in its present form, because for both interfaces the registers from FEC
25173 1 are used to communicate over MII.
25175 2. Remove code duplication for resetting the FEC by isolating it into a
25178 3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().
25180 4. Optimize mii_init() to only reset the FEC 1 controller once.
25182 5. Fix a typo in mii_init() using index i instead of j thus potentially
25183 leading to unpredictable results.
25185 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25187 commit 6a5e1d75bf106fa157e9ce68bcaf4b13e8a1d214
25188 Author: Guennadi Liakhovetski <lg@denx.de>
25189 Date: Tue Nov 20 13:14:20 2007 +0100
25191 Fix endianness conversions in rtl8169 driver
25193 It is unclear on what platforms this driver has been tested, since
25194 noone up to now defines CONFIG_RTL8169 in the board configuration
25195 header. Now it has been fixed for a big-endian mpc8241 based
25196 linkstation platform. This patch presents the necessary endianness
25199 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
25201 commit 58694f9709c0c3e3178e349ae748d98cfb0c639a
25202 Author: Zhang Wei <wei.zhang@freescale.com>
25203 Date: Thu Jan 3 10:51:15 2008 +0800
25205 Add Ctrl combo key support to usb keyboard driver.
25207 Ctrl combo key support is added, which is very useful to input Ctrl-C
25208 for interrupt current job.
25209 Also add usb_event_poll() calling to usb_kbd_testc(), which can get
25210 key input when tstc() is called.
25212 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
25213 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25215 commit 07eb02687f008721974a2fb54cd7fdc28033ab3c
25216 Author: Wolfgang Denk <wd@denx.de>
25217 Date: Wed Jan 9 13:43:38 2008 +0100
25219 Coding Style clenaup; update CHANGELOG
25221 Signed-off-by: Wolfgang Denk <wd@denx.de>
25223 commit c26acc1a43b31ddca5add42fd0360ff0eee90c80
25224 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25225 Date: Thu Dec 27 17:13:11 2007 +0100
25227 Remove bit swapping in Xilinx Spartan bitfile loading
25229 This patch removes the unnecessary bit swapping when
25230 booting .bit files with the 'fpga loadb' command.
25232 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25234 commit 437fc7327f0611f82937858f2d80e4cd61b40984
25235 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25236 Date: Thu Dec 27 17:13:05 2007 +0100
25238 Fix MSB check in Xilinx Spartan slave serial mode
25240 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25242 commit 3bff4ffa33729a42645e328a21e8d16488872958
25243 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25244 Date: Thu Dec 27 17:12:56 2007 +0100
25246 Add new Xilinx Spartan FPGA types
25248 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25250 commit 21d39d598c4e74d4e7761608c79dba2715d40a4c
25251 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25252 Date: Thu Dec 27 17:12:43 2007 +0100
25254 Add pre and post configuration callbacks for Spartan FPGAs
25256 This patch adds a post configuration callback for Spartan2/3 FPGAs.
25257 pre and post configuration callback are now optional and
25258 not called when the function pointer is set to NULL.
25260 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25262 commit 0133502e39ff89b67c26cb4015e0e7e8d9571184
25263 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25264 Date: Thu Dec 27 17:12:34 2007 +0100
25266 Improve configuration of FPGA subsystem
25268 This patch removes the FPGA subsystem configuration through
25269 the CONFIG_FPGA bitmask configuration option.
25271 See README for the new options:
25274 CONFIG_FPGA_<vendor>,
25275 CONFIG_FPGA_<family>
25277 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25279 commit 95c6bc7d4a3588b452baca610f8c795a83630477
25280 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25281 Date: Thu Dec 27 16:55:17 2007 +0100
25283 Add Epson RX8025 RTC support
25285 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25287 commit 1208a2dfde02bedd3c5bda29a606632b8e0be058
25288 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25289 Date: Thu Dec 27 16:57:23 2007 +0100
25291 serial: Make default_serial_console() a weak function
25293 With this patch it is possible to reimplement default_serial_console()
25294 in board specific code. This will be done in the upcomming PMC440
25295 U-Boot port. This also allows the lwmon board maintainer to
25296 remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.
25298 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25300 commit d16471ee05ce7ac5392bc0e9fe3ff4b58a768f33
25301 Author: Harald Welte <laforge@openmoko.org>
25302 Date: Wed Dec 19 14:14:47 2007 +0100
25304 add 'terminal program' functionality
25306 This patch adds a 'cu' like serial terminal command to u-boot
25307 using which you can access other serial ports from the system console.
25309 OpenMoko uses this in their Neo1973 phones to get access to the GSM
25310 Modem and GPS chip from the bootloader.
25312 Signed-off-by: Harald Welte <laforge@openmoko.org>
25314 commit 62d4f4365341576f5a5307b2b205a5aa2e3c6be6
25315 Author: Harald Welte <laforge@openmoko.org>
25316 Date: Wed Dec 19 14:12:53 2007 +0100
25318 Re-introduce the 'nand read.oob' and 'nand write.oob' commands
25319 that used to exist with the legacy NAND code
25321 Signed-off-by: Harald Welte <laforge@openmoko.org>
25323 commit f540c42d9564854b19ce9bbb70affe172529fe70
25324 Author: Harald Welte <laforge@openmoko.org>
25325 Date: Wed Dec 19 14:09:58 2007 +0100
25327 Fix building with CRAMFS but not JFFS2 support
25329 Signed-off-by: Harald Welte <laforge@openmoko.org>
25331 commit 23d0baf967fecdaf1804f045f6339337c5607eec
25332 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25333 Date: Sat Dec 22 15:52:58 2007 +0100
25335 Allow CONFIG_AUTO_COMPLETE and command history CONFIG_CMDLINE_EDITING at the sametime
25337 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
25338 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25340 commit 23776ff292966a85d811126933830bed48211826
25341 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25342 Date: Tue Dec 11 10:53:12 2007 +0100
25344 ARM: support board-specific ethernet PHY init
25346 Add until the new phylib will be arrived
25348 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25350 commit 7b74ebe723e576baedf5a8b6240589b19b845a1b
25351 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25352 Date: Sat Dec 8 16:34:08 2007 +0100
25354 IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
25356 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25358 commit a2df4da31b1a1e41e3e9e1358cfc52b806046ce1
25359 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25360 Date: Sun Dec 9 11:01:10 2007 +0100
25362 Add missing file in gitignore and comments
25364 based on Linux source tree's .gitignore files
25366 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
25368 commit 435dc8fcdb3bc61d3d490773a8f369f98a20c868
25369 Author: Wolfgang Denk <wd@denx.de>
25370 Date: Wed Jan 9 11:36:21 2008 +0100
25372 Coding Style cleanup, update CHANGELOG
25374 Signed-off-by: Wolfgang Denk <wd@denx.de>
25376 commit b2e2142c500c48a57f18f9dd30e66c13caea0971
25377 Author: Stefan Roese <sr@denx.de>
25378 Date: Wed Jan 9 10:38:58 2008 +0100
25380 POST: Execute SPR test after relocation
25382 On LWMON5 we now use d-cache as init-ram and stack. The SPR POST test uses
25383 self modifying code and this doesn't work with stack in d-cache, since
25384 I can't move the code from d-cache to i-cache. We move the SPR test to
25385 be executed a little later, after relocation. Then stack is located in
25386 SDRAM and this self-modifying code is no problem anymore.
25388 Signed-off-by: Stefan Roese <sr@denx.de>
25390 commit 8f24e0637ae113500d8bd60d80d57afcc0aa8bde
25391 Author: Stefan Roese <sr@denx.de>
25392 Date: Wed Jan 9 10:28:20 2008 +0100
25394 ppc4xx: Change LWMON5 to not use OCM for init-ram and POST anymore
25396 This patch configures the LWMON5 port to use d-cache as init-ram and
25397 the unused GPT0_COMP6 as POST WORD storage.
25399 Signed-off-by: Stefan Roese <sr@denx.de>
25401 commit 1754f50b710194f886b6f2831803d8960171a14d
25402 Author: Stefan Roese <sr@denx.de>
25403 Date: Wed Jan 9 10:25:46 2008 +0100
25405 ppc4xx: Add CFG_POST_ALT_WORD_ADDR to support non OCM POST WORD storage
25407 The privious 4xx POST implementation only supported storing the POST
25408 WORD in OCM. Since we need to reserve the OCM on LWMON5 for the logbuffer
25409 we need to store the POST WORD in some other non volatile location.
25410 This patch adds CFG_POST_ALT_WORD_ADDR to specify an address for such
25413 Signed-off-by: Stefan Roese <sr@denx.de>
25415 commit e02c521d94b45d7b05aa522e4ccde6b74bf5fe57
25416 Author: Stefan Roese <sr@denx.de>
25417 Date: Wed Jan 9 10:23:16 2008 +0100
25419 ppc4xx: Add 44x cache locking to better support init-ram in d-cache
25421 This patch adds support for locking the init-ram/stack in d-cache,
25422 so that other regions may use d-cache as well
25424 Note, that this current implementation locks exactly 4k of d-cache,
25425 so please make sure that you don't define a bigger init-ram area. Take
25426 a look at the lwmon5 440EPx implementation as a reference.
25428 Signed-off-by: Stefan Roese <sr@denx.de>
25430 commit 0ddb89601a8d29e808db450366752ffdc6267c53
25431 Author: Wolfgang Denk <wd@denx.de>
25432 Date: Wed Jan 9 10:16:33 2008 +0100
25434 Fix memset bug in ext2fs_read_file()
25436 ext2fs_read_file() had the function arguments swapped.
25438 Pointed out by Mike Montour, 19 Dec 2007 22:34:25 -0800
25440 Signed-off-by: Wolfgang Denk <wd@denx.de>
25442 commit 32d6f1bc09175f3b77469771e839bc7255a9f22e
25443 Author: Markus Klotzbücher <mk@denx.de>
25444 Date: Tue Jan 5 08:17:15 1988 +0100
25446 Fix problems with usb storage devices on MPC5200 /TQM5200
25448 The MPC5200 OHCI controller operates in big endian, so
25449 CFG_OHCI_BE_CONTROLLER must be defined for it to work properly.
25451 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25453 commit 46f6e5019048b103d7693d5310de0f1cfbaf4c19
25454 Author: Wolfgang Denk <wd@denx.de>
25455 Date: Tue Jan 8 22:58:27 2008 +0100
25457 Fix compile problem with new env code.
25459 Signed-off-by: Wolfgang Denk <wd@denx.de>
25461 commit 64b3727b9779d86127cd576e392a987de5ebb9fd
25462 Author: Markus Klotzbücher <mk@denx.de>
25463 Date: Tue Nov 27 10:23:20 2007 +0100
25465 tools: fix fw_printenv tool to compile again
25467 This patch updates the fw_printenv/fw_setenv userspace tool to include
25468 the correct MTD header in order to compile against current kernel
25469 headers. Backward compatibility is preserved by introducing an option
25470 MTD_VERSION which can be set to "old" for compilation using the old MTD
25471 headers. Along with this a number of warnings are fixed.
25473 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25475 commit 1f84021a85abeb837d2ce0dc84297b4f1d45d516
25476 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25477 Date: Tue Jan 8 15:40:09 2008 +0100
25479 ppc4xx: assign PCI interrupts on seuqoia boards
25481 Some operating systems rely on assigned PCI interrupts.
25483 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25485 commit 6e9233d30afe57cb6e148fbfa4895e7810196fac
25486 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25487 Date: Tue Jan 8 15:50:49 2008 +0100
25489 ppc4xx: Move cpu/ppc4xx/vecnum.h into include path
25491 This patch allows the use of 4xx interrupt vector number defines
25492 in board specific code outside cpu/ppc4xx.
25494 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25496 commit 580d1d3186a2bc6dbdb626941b716dae1788e51e
25497 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25498 Date: Tue Jan 8 15:39:01 2008 +0100
25500 ppc4xx: Fix UIC2 vector number base
25502 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25504 commit ff5fb8a6ccba56e3482d0e297d8cfb7faa040811
25505 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25506 Date: Tue Jan 8 12:49:58 2008 +0100
25508 ppc4xx: Update PLB/PCI divider for PMC440 board
25510 This patch updates the PLB/PCI divider when running at
25511 400MHz CPU frequency from 4 to 3 which results in 44MHz PCI sync clock.
25513 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25515 commit 7d5d75633174867316a0c0f2fca5ceb2cf312cde
25516 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25517 Date: Tue Jan 8 11:13:09 2008 +0100
25519 ppc4xx: Disable error message when no NAND chip is installed on PMC440
25521 Add CFG_NAND_QUIET_TEST option to disable error message when
25522 no NAND chip is installed on PMC440 boards.
25524 Disable a couple of config defines that are only used for NAND_U_BOOT.
25526 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25528 commit c83d7ca4dadd44ae430235077f63b64a11f36f6e
25529 Author: Wolfgang Denk <wd@denx.de>
25530 Date: Tue Jan 8 22:58:27 2008 +0100
25532 Fix compile problem with new env code.
25534 Signed-off-by: Wolfgang Denk <wd@denx.de>
25536 commit 6de66b35426312a21174a9bf0576a094e2904bea
25537 Author: Markus Klotzbücher <mk@denx.de>
25538 Date: Tue Nov 27 10:23:20 2007 +0100
25540 tools: fix fw_printenv tool to compile again
25542 This patch updates the fw_printenv/fw_setenv userspace tool to include
25543 the correct MTD header in order to compile against current kernel
25544 headers. Backward compatibility is preserved by introducing an option
25545 MTD_VERSION which can be set to "old" for compilation using the old MTD
25546 headers. Along with this a number of warnings are fixed.
25548 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
25550 commit ad3006fe7e84667021753b74247b0bafd97ba35f
25551 Author: Gerald Van Baren <vanbaren@cideas.com>
25552 Date: Mon Jan 7 23:47:32 2008 -0500
25554 LIBFDT: use memmove() instead of memcpy()
25556 This is partial patch from the DTC/libfdt
25557 commit 67b6b33b9b413a450a72135b5dc59c0a1e33e647
25558 Author: David Gibson <david@gibson.dropbear.id.au>
25559 Date: Wed Nov 21 11:56:14 2007 +1100
25561 The patch also fixes one genuine bug caught by valgrind -
25562 _packblocks() in fdt_rw.c was using memcpy() where it should have been
25565 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25567 commit aec7135bc300e3340d18f203347ee00c5b5f68c0
25568 Author: David Gibson <david@gibson.dropbear.id.au>
25569 Date: Mon Dec 17 14:42:07 2007 +1100
25571 libfdt: Add more documentation (patch the seventh)
25573 This patch adds more documenting comments to libfdt.h. Specifically,
25574 these document the read/write functions (not including fdt_open_into()
25575 and fdt_pack(), for now).
25577 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
25579 commit 9d4450b5adc36623e9c1de1f92539db77ad0c57e
25580 Author: David Gibson <david@gibson.dropbear.id.au>
25581 Date: Mon Dec 17 14:41:52 2007 +1100
25583 libfdt: Add more documentation (patch the sixth)
25585 This patch adds some more documenting comments to libfdt.h.
25586 Specifically this documents all the write-in-place functions.
25588 Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
25590 commit b60af3d4c1680487ee37e11aa1b3db6dec04d8f0
25591 Author: Gerald Van Baren <vanbaren@cideas.com>
25592 Date: Sat Dec 29 22:45:27 2007 -0500
25594 Fine grained per property /chosen updating.
25596 Implement a suggestion by Scott Wood to make the /chosen handling fine
25597 grained. Don't overwrite pre-existing properties on a per-property basis,
25598 so if /chosen exists but a necessary /chosen/property doesn't, it gets
25599 created. If a /chosen property exists, it is NOT overwritten unless the
25600 "force" flag is true.
25602 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25604 commit 238cb7a423c6eaa36496efb788cfb9798cea7f95
25605 Author: Gerald Van Baren <vanbaren@cideas.com>
25606 Date: Sat Jan 5 15:33:29 2008 -0500
25608 Improve the FDT help message.
25610 Add a note that "fdt copy" makes the new address active.
25611 Remove most of the extra hints at the end of the fdt help.
25613 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25615 commit ea6d8be153ceaf16958f8009cea6d75f3ff58d92
25616 Author: Gerald Van Baren <vanbaren@cideas.com>
25617 Date: Sat Jan 5 14:52:04 2008 -0500
25619 Support setting FDT properties with optional values.
25621 Fix a bug found and documented by Bartlomiej Sieka where the optional
25622 value on "fdt set <path> <prop> [<val>]" wasn't optional.
25624 => fdt mknode / testnode
25625 => fdt print /testnode
25628 => fdt set /testnode testprop
25629 => fdt print /testnode
25634 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
25636 commit 22fb2246df91bfc840d87f0c5910818bad55577a
25637 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25638 Date: Fri Dec 28 11:56:30 2007 +0100
25640 Add fdt_find_and_setprop() to fdt_support.h
25642 fdt_find_and_setprop() is used by several 4xx boards and it's
25643 missing in the appropriate header. This patch eliminates a
25644 warning when building U-Boot for such boards.
25646 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25647 Acked-by: Stefan Roese <sr@denx.de>
25649 commit 802b769bac17b0560d3535a42c502469ee190cd1
25650 Author: Stefan Roese <sr@denx.de>
25651 Date: Tue Jan 8 18:39:30 2008 +0100
25653 ppc4xx: Return 0 on success in 4xx ethernet driver
25655 Signed-off-by: Stefan Roese <sr@denx.de>
25657 commit 6775c68683a53c7abc778774641aac6f833a2cbf
25658 Author: Kim Phillips <kim.phillips@freescale.com>
25659 Date: Tue Jan 8 09:59:49 2008 -0600
25661 mpc83xx: fix missed pci_hose -> hose conversion for new libfdt code
25663 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25665 commit 94fab25f5f1a7d1c0cc63c17e813ea8943fe49c7
25666 Author: Kim Phillips <kim.phillips@freescale.com>
25667 Date: Thu Dec 20 16:28:34 2007 -0600
25669 mpc83xx: rm remaining FLAT_TREE code
25671 ..in board pci.c files
25673 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25675 commit b3458d2cd55d01732e30a76d898afd99e871cd67
25676 Author: Kim Phillips <kim.phillips@freescale.com>
25677 Date: Thu Dec 20 15:57:28 2007 -0600
25679 mpc83xx: remove FLAT_TREE code
25681 need to rm it from pci code, too!
25683 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25685 commit 5b8bc606c61456566af6912f818a153b6b06f242
25686 Author: Kim Phillips <kim.phillips@freescale.com>
25687 Date: Thu Dec 20 14:09:22 2007 -0600
25689 mpc83xx: convert to using do_fixup_*()
25691 convert to using simpler mpc85xx style fdt update code; streamline by
25692 eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
25693 the old school FLAT_TREE code from 83xx (since the sbc8349 was just
25694 converted over to using libfdt).
25696 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25698 commit e496865ecc31a2fe2f9abfe798334bb02aaf05ab
25699 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25700 Date: Thu Dec 20 12:58:51 2007 -0500
25702 sbc8349: enable libfdt by default on WRS SBC8349 board.
25704 Make libfdt the default for the WRS SBC8349 board.
25705 Parallel of commit 35cc4e4823668e8745854899cfaedd4489beb0ef
25706 done for the other 83xx based boards. Also fix a typo in CONFIG_PCI.
25708 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25710 commit 2408b3f20bcbdd9c6c397cd03ab0d71d54680a40
25711 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25712 Date: Thu Dec 20 12:58:16 2007 -0500
25714 sbc8349: migrate board to libfdt
25716 This adds libfdt support code for the Wind River sbc8349 board.
25718 Parallel of commit 3fde9e8b22cfbd7af489214758f9839a206576cb for
25719 the other Freescale 83xx boards.
25721 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25723 commit 27a256a90cc86392ac9bf0039a3afe638ec2c18d
25724 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
25725 Date: Thu Dec 20 12:56:19 2007 -0500
25727 sbc8349: Remove board specific ECC code
25729 ECC code is now shared for all 83xx boards, so remove board specific one.
25730 See commit daab8c67d2defef73dc26ab07f0c3afd1b05d019 for reference.
25732 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
25734 commit a1e1ac849249310e5e2e5c7148e9fb353a8317a7
25735 Author: Kim Phillips <kim.phillips@freescale.com>
25736 Date: Thu Dec 20 01:30:48 2007 -0600
25738 mpc83xx: Remove CONFIG options related to OF that we dont use (on 837x)
25740 continuation of commit 37395fa2b0d9d617f28d44ca11592260ef16105a to 837x
25742 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25744 commit ccf21c311e68d48399eff1e72936052885f6e3f7
25745 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25746 Date: Thu Dec 6 16:43:40 2007 +0100
25748 Add support CONFIG_UEC_ETH3 in MPC83xx
25750 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
25752 commit e6af9932d31171e35db880e7b2f29f903b1b7660
25753 Author: Kumar Gala <galak@kernel.crashing.org>
25754 Date: Mon Nov 26 11:00:54 2007 -0600
25756 Remove CONFIG options related to OF that we dont use
25758 The MPC8360E MDS config defined:
25760 CONFIG_OF_HAS_UBOOT_ENV
25762 Which we don't use or ever needed. This seems like copy-paste feature creep.
25764 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
25766 commit f602082b4b7ed4ee16432067cc67a0a24fedc715
25767 Author: Kim Phillips <kim.phillips@freescale.com>
25768 Date: Mon Dec 10 14:16:22 2007 -0600
25770 mpc83xx: supress compiler warning
25772 mpc8360emds.c: In function ‘ft_board_setup’:
25773 mpc8360emds.c:335: warning: assignment discards qualifiers from pointer target type
25774 mpc8360emds.c:345: warning: assignment discards qualifiers from pointer target type
25776 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25778 commit c16e44fa835fb9eec982d919863a04e2f78e5ce7
25779 Author: Kim Phillips <kim.phillips@freescale.com>
25780 Date: Tue Nov 27 14:17:29 2007 -0600
25782 mpc83xx: fix remaining fdt_find_node_by_path references
25784 rename to fdt_path_offset
25786 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25788 commit 921d4b19ad1be704df58725485d9292dc0414adf
25789 Author: Kim Phillips <kim.phillips@freescale.com>
25790 Date: Mon Nov 19 12:30:09 2007 -0600
25792 mpc83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions for 837x
25794 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for 837x.
25795 This change guarantees that the environment will be located on the
25796 first flash sector after the U-Boot image.
25798 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25800 commit 24f868433b50ecbaa88e118aadc7bd254013c6ae
25801 Author: Kim Phillips <kim.phillips@freescale.com>
25802 Date: Fri Nov 9 14:28:08 2007 -0600
25804 mpc83xx: mpc8360 rev.2.1 erratum 2: replace rgmii-id with rgmii-rxid
25806 u-boot itself uses GMII mode on the 8360. Fix up UCC phy-connection-type
25807 properties in the device tree so the PHY gets configured for internal delay on
25808 RX only by the OS, as prescribed by mpc8360 rev. 2.1 pb mds erratum #2.
25810 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25812 commit 22b448dbfbe2a98f01ff4adc3c3979f8c541ad7b
25813 Author: Dave Liu <r63238@freescale.com>
25814 Date: Tue Sep 18 12:41:15 2007 +0800
25816 mpc83xx: update the CREDITS and MAINTAINERS
25818 update the CREDITS and MAINTAINERS.
25820 Signed-off-by: Dave Liu <daveliu@freescale.com>
25822 commit b21add4b42af7b767448251b599b91066a160e0d
25823 Author: Dave Liu <r63238@freescale.com>
25824 Date: Tue Sep 18 12:40:21 2007 +0800
25826 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc837xemds
25828 Add the MAINTAINER and MAKEALL entries for mpc837xemds
25830 Signed-off-by: Dave Liu <daveliu@freescale.com>
25832 commit f8900ce9094c462355eb792eea264ff16ac8fd16
25833 Author: Dave Liu <r63238@freescale.com>
25834 Date: Tue Sep 18 12:38:53 2007 +0800
25836 mpc83xx: Add the MPC837xEMDS board readme
25838 Add the README.mpc837xemds to /doc
25840 Signed-off-by: Dave Liu <daveliu@freescale.com>
25842 commit 19580e660cc8da49f16536a8bd78c047c7bc12e5
25843 Author: Dave Liu <r63238@freescale.com>
25844 Date: Tue Sep 18 12:37:57 2007 +0800
25846 mpc83xx: Add the support of MPC837xEMDS board
25848 The MPC837xEMDS board support:
25849 * DDR2 400MHz hardcoded and SPD init
25850 * Local bus NOR Flash
25851 * I2C, UART, MII and RTC
25855 Signed-off-by: Dave Liu <daveliu@freescale.com>
25857 commit 555da61702771fe0f76f3de23b4e7590f3704161
25858 Author: Dave Liu <r63238@freescale.com>
25859 Date: Tue Sep 18 12:36:58 2007 +0800
25861 mpc83xx: Add the support of MPC8315E SoC
25863 The MPC8315E SoC including e300c3 core and new IP blocks,
25864 such as TDM, PCI Express and SATA controller.
25866 Signed-off-by: Dave Liu <daveliu@freescale.com>
25868 commit 03051c3d35c9981ceaa059005660e699f3eacf1c
25869 Author: Dave Liu <r63238@freescale.com>
25870 Date: Tue Sep 18 12:36:11 2007 +0800
25872 mpc83xx: Add the support of MPC837x SoC
25874 The MPC837x SoC including e300c4 core and new IP blocks,
25875 such as SDHC, PCI Express and SATA controller.
25877 Signed-off-by: Dave Liu <daveliu@freescale.com>
25879 commit 651d96f7e4c84adcdb98ef07ec878c20326e3359
25880 Author: Anton Vorontsov <avorontsov@ru.mvista.com>
25881 Date: Wed Nov 14 18:54:53 2007 +0300
25883 MPC8360E-MDS: configure and enable second UART
25885 Despite user manual, BCSR9.7 is negated (high) on HRST, so
25886 UART2 is disabled. Fix that and configure QE pins properly.
25888 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
25890 commit b2893e1fcb28fad8c8b317104df8cee0142c7631
25891 Author: Timur Tabi <timur@freescale.com>
25892 Date: Mon Nov 5 09:34:06 2007 -0600
25894 83xx: fix CFG_ENV_ADDR and CFG_ENV_SECT_SIZE definitions
25896 Fix the definitions of CFG_ENV_ADDR and CFG_ENV_SECT_SIZE for all of the
25897 currently-defined 83xx boards. This change guarantees that the environment
25898 will be located on the first flash sector after the U-Boot image.
25900 Signed-off-by: Timur Tabi <timur@freescale.com>
25901 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
25903 commit e05329516a13616b53240cd85b739217c2bf87f1
25904 Author: Larry Johnson <lrj@acm.org>
25905 Date: Fri Jan 4 13:27:02 2008 -0500
25907 ppc4xx: Remove weak binding from common Denali data-eye search code
25909 Now that there are no board-specific versions of
25910 "denali_core_search_data_eye()", the weak binding on the common version
25913 Signed-off-by: Larry Johnson <lrj@acm.org>
25915 commit 5ba576c01602fd328800a427964c36a0a05c5dce
25916 Author: Stefan Roese <sr@denx.de>
25917 Date: Sat Jan 5 09:13:46 2008 +0100
25919 ppc4xx: Remove unused CONFIG_ECC_ERROR_RESET from 44x_spd_ddr2.c
25921 Signed-off-by: Stefan Roese <sr@denx.de>
25923 commit 845c6c95dbfe6c915ce68a0a115852fa17932fb4
25924 Author: Stefan Roese <sr@denx.de>
25925 Date: Sat Jan 5 09:12:41 2008 +0100
25927 ppc4xx: Update Katmai/44x_spd_ddr2.c code for optimal DDR2 setup
25929 On Katmai the complete auto-calibration somehow doesn't seem to
25930 produce the best results, meaning optimal values for RQFD/RFFD.
25931 This was discovered by GDA using a high bandwidth scope,
25932 analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
25933 so now on Katmai "only" RFFD is auto-calibrated.
25935 This patch also adds RDCC calibration as mentioned on page 7 of
25936 the AMCC PowerPC440SP/SPe DDR2 application note:
25937 "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
25939 Signed-off-by: Stefan Roese <sr@denx.de>
25941 commit 49db47b8ae6afff2b898be312948ff501357dc80
25942 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25943 Date: Wed Jan 2 16:48:42 2008 +0100
25945 ppc4xx: Remove sdram.h from PMC440 board
25947 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25949 commit 34065a2ce0d8972f2ec6652076014ab243d2ce8a
25950 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25951 Date: Wed Jan 2 16:48:34 2008 +0100
25953 ppc4xx: use common denali core defines and data eye search code for PMC440
25955 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25957 commit 9ac6b6f3d3f1b072d89268b2efe47e95e6659489
25958 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25959 Date: Wed Jan 2 12:05:14 2008 +0100
25961 ppc4xx: More cleanup for esd's LCD code
25963 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
25965 commit fe9c26b330a21ce73e52b5bd347d725cb81e3cfb
25966 Author: Stefan Roese <sr@denx.de>
25967 Date: Fri Jan 4 12:00:01 2008 +0100
25969 ppc4xx: Fix Sequoia NAND booting target
25971 The Sequoia NAND booting target now uses the recently extracted
25972 cpu/ppc4xx/denali_data_eye.c file too.
25974 Signed-off-by: Stefan Roese <sr@denx.de>
25976 commit 0ddd969aec532bd7eae30fc09590488a3aaa629a
25977 Author: Lawrence R. Johnson <lrj@acm.org>
25978 Date: Thu Jan 3 15:02:02 2008 -0500
25980 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Korat board
25982 Signed-off-by: Larry Johnson <lrj@acm.org>
25984 commit b05e8bf58be9d8956fdfde3d8c8e87c140414663
25985 Author: Lawrence R. Johnson <lrj@acm.org>
25986 Date: Fri Jan 4 02:11:56 2008 -0500
25988 ppc4xx: Use CFG_4xx_GPIO_TABLE to configure Sequoia board
25990 Note: this patch changes the configuration of some GPIO registers:
25992 Register Old Value New Value
25993 --------------- ---------- ----------
25994 DCR GPIO0_TCR 0x0000000F 0x0000F0CF
25995 DCR GPIO0_TSRH 0x55005000 0x00000000
25996 DCR GPIO1_TCR 0xC2000000 0xE2000000
25997 DCR GPIO1_TSRL 0x0C000000 0x00200000
25998 DCR GPIO1_ISR2L 0x00050000 0x00110000
26000 Signed-off-by: Larry Johnson <lrj@acm.org>
26002 commit 5ab884b254ca2e707ab50545cd705f30108cf491
26003 Author: Lawrence R. Johnson <lrj@acm.org>
26004 Date: Thu Jan 3 18:54:00 2008 -0500
26006 ppc4xx: Add functionality to GPIO support
26008 This patch makes two additions to GPIO support:
26010 First, it adds function gpio_read_in_bit() to read the a bit from the
26011 GPIO Input Register (GPIOx_IR) in the same way that function
26012 gpio_read_out_bit() reads a bit from the GPIO Output Register
26015 Second, it modifies function gpio_set_chip_configuration() to provide
26016 an additional option for configuring the GPIO from the
26017 "CFG_4xx_GPIO_TABLE".
26019 According to the 440EPx User's Manual, when an alternate output is used,
26020 the three-state control is configured in one of two ways, depending on
26021 the particular output. The first option is to select the corresponding
26022 alternate three-state control in the GPIOx_TRSH/L registers. The second
26023 option is to select the GPIO Three-State Control Register (GPIOx_TCR) in
26024 the GPIOx_TRSH/L registers, and set the corresponding bit in the
26025 GPIOx_TCR register to enable the output. For example, the Manual
26026 specifies configuring the GPIO00 Alternate 1 Signal (PreAddr07) to use
26027 the alternate three-state control (first option), and specifies
26028 configuring the GPIO32 Alternate 1 Signal (USB2OM0) with the output
26029 enabled in the GPIOx_TCR register (second option).
26031 Currently, gpio_set_chip_configuration() configures all alternate signal
26032 outputs to use the first option. This patch allow the second option to
26033 be selected by setting the "out_val" element in the table entry to
26034 "GPIO_OUT_1". The first option is used when the "out_val" element is
26035 set to "GPIO_OUT_0". Because "out_val" is not currently used when an
26036 alternate signal is selected, and because all current GPIO tables set
26037 "out_val" to "GPIO_OUT_0" for all alternate signals, this patch should
26038 not change any existing configurations.
26040 Signed-off-by: Larry Johnson <lrj@acm.org>
26042 commit 196404cdc1de495d6182e84731c200fc5748df15
26043 Author: Larry Johnson <lrj@arlinx.com>
26044 Date: Sun Dec 30 01:01:54 2007 -0500
26046 PPC4xx: Remove sdram.h from board/lwmon5
26048 These definitions are now in "include/ppc440.h".
26050 Signed-off-by: Larry Johnson <lrj@acm.org>
26052 commit ef16fccf96e55eab93fe25d03ebe2e9b56e5332b
26053 Author: Larry Johnson <lrj@arlinx.com>
26054 Date: Sun Dec 30 01:01:32 2007 -0500
26056 PPC4xx: Use common code for LWMON5 board SDRAM support
26058 This patch also modifies the functionality of the code so that the data-eye
26059 search is now done with with the cache disabled.
26061 Signed-off-by: Larry Johnson <lrj@acm.org>
26063 commit 62cc3951ab72135d9c101f1845b794e63a0fa189
26064 Author: Larry Johnson <lrj@arlinx.com>
26065 Date: Sun Dec 30 01:01:14 2007 -0500
26067 PPC4xx: Remove sdram.h from board/amcc/sequoia
26069 These definitions are now in "include/ppc440.h".
26071 Signed-off-by: Larry Johnson <lrj@acm.org>
26073 commit ce3902e1765bbfb07cf5bbe98be9a68e3009996a
26074 Author: Larry Johnson <lrj@arlinx.com>
26075 Date: Sun Dec 30 01:00:50 2007 -0500
26077 PPC4xx: Use common code for Sequoia board SDRAM support
26079 Signed-off-by: Larry Johnson <lrj@acm.org>
26081 commit 8b0c5c127690335758100c25eaec2b84db97c101
26082 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26083 Date: Thu Dec 27 16:58:41 2007 +0100
26085 net: Add CONFIG_NET_DO_NOT_TRY_ANOTHER option
26087 When CONFIG_NET_DO_NOT_TRY_ANOTHER is defined U-Boot's
26088 networking stack does not automatically switch to
26089 another interface. This patch does not touch the default
26092 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26093 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26095 commit 505be87a65e4f87ad7d8da1d57ea4dcd487d7e32
26096 Author: Upakul Barkakaty <upakul@gmail.com>
26097 Date: Thu Nov 29 12:16:13 2007 +0530
26099 NET: Proper return code handling in eth_init() function in file eth.c
26101 This patch modifies the return code handling in the eth_init()
26102 function, to be compatible with the handling of the return codes in
26103 the other network stack files. It now returns a 0 on Success and -1 on
26106 Signed-off-by: Upakul Barkakaty <upakul.barkakaty@conexant.com>
26107 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26109 commit 5ca2d0953e4579a80810966cca2077e20d912c97
26110 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
26111 Date: Mon Nov 19 20:27:04 2007 +0900
26113 net/eth.c: Fix env_enetaddr signed overflow
26115 Assigning the output of simple_strtoul(CB:A9:87:65:43:21) to `char', we are
26118 U-Boot 1.2.0 (Aug 30 2007 - 08:27:37)
26126 Warning: NEC-Candy MAC addresses don't match:
26127 Address in SROM is 00:00:4C:80:92:A2
26128 Address in environment is FFFFFFCB:FFFFFFA9:FFFFFF87:65:43:21
26130 This patch changes env_enetaddr type from `char' to `unsigned char'.
26132 Cc: Masaki Ishikawa <ishikawa-masaki@cnt.mxe.nes.nec.co.jp>
26133 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
26134 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26136 commit f85b60710571b37293d2233933b76e2aa3db5635
26137 Author: Rafal Jaworowski <raj@semihalf.com>
26138 Date: Thu Dec 27 18:19:02 2007 +0100
26140 Introduce new eth_receive routine
26142 The purpose of this routine is receiving a single network frame, outside of
26143 U-Boot's NetLoop(). Exporting it to standalone programs that run on top of
26144 U-Boot will let them utilise networking facilities. For sending a raw frame
26145 the already existing eth_send() can be used.
26147 The direct consumer of this routine is the newly introduced API layer for
26148 external applications (enabled with CONFIG_API).
26150 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
26151 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
26152 Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
26154 commit 5c740711f0ea5b51414b341b71597c4a0751be74
26155 Author: Jon Loeliger <jdl@freescale.com>
26156 Date: Thu Jan 3 10:41:04 2008 -0600
26158 8610: Move include of config.h earlier.
26160 Include config.h earlier in the set of #includes
26161 so as to avoid a incidental and duplicate definition
26162 of CFG_CACHELINE_SIZE.
26164 Signed-off-by: Jon Loeliger
26166 commit 61d3421bdea090bd0399b14c3e10a3bebcc8d5ff
26167 Author: Jon Loeliger <jdl@freescale.com>
26168 Date: Tue Dec 4 10:53:34 2007 -0600
26170 Don't slam #undef DEBUG in the 8641HPCN config file.
26172 Doing so prevents it from being individually set
26173 and useful in other files.
26175 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26177 commit ea9f7395ec362584e5e4f266bd0b0c4422cf6a4c
26178 Author: Jon Loeliger <jdl@freescale.com>
26179 Date: Wed Nov 28 14:47:18 2007 -0600
26181 Convert MPC8641HPCN to use libfdt.
26183 Assumes the presence of the aliases node in the DTS to
26184 locate the ethernet, pci and serial nodes for fixups.
26186 Use consistent fdtaddr and fdtfile in environment variables.
26188 Signed-off-by: Jon Loeliger <jdl@freescale.com>
26190 commit ce37422d0002e10490e268392e0c4e3028e52cec
26191 Author: Stefan Roese <sr@denx.de>
26192 Date: Wed Jan 2 14:06:26 2008 +0100
26194 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
26196 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
26197 flash chips connected to a 32bit wide port.
26199 Signed-off-by: Stefan Roese <sr@denx.de>
26201 commit 1182e9f8e3b92fc372d64943293de53daa2e26cf
26202 Author: Wolfgang Denk <wd@denx.de>
26203 Date: Wed Jan 2 15:58:44 2008 +0100
26205 Fix compile problem introduced by "cleanup" commit 3dfd708c
26207 Signed-off-by: Wolfgang Denk <wd@denx.de>
26209 commit 1aaab9bfae0b3b2ee2b418c22c651280ee7b65c7
26210 Author: Wolfgang Denk <wd@denx.de>
26211 Date: Wed Jan 2 15:54:45 2008 +0100
26213 Make scripts and Makefiles POSIX compliant
26215 The bash builtin versions of the "test" (resp. "[") command allow
26216 using "==" for string comparisons, but POSIX compatible implemen-
26217 tations (like /usr/bin/test) insist on using "=" only. On such systems
26220 $ /usr/bin/test a == a && echo OK
26221 /usr/bin/test: ==: binary operator expected
26223 This patch fixes Makefiles and scripts to use POSIX style.
26225 Signed-off-by: Wolfgang Denk <wd@denx.de>
26227 commit 47cc23cbe9a669c510183f4f049bf703ef445f3b
26228 Author: Stefan Roese <sr@denx.de>
26229 Date: Wed Jan 2 14:05:37 2008 +0100
26231 cfi_flash: Fix bug in flash_isset() to use correct 32bit function
26233 This bug was detected on the LWMON5 target which has 2 Intel 16bit wide
26234 flash chips connected to a 32bit wide port.
26236 Signed-off-by: Stefan Roese <sr@denx.de>
26238 commit 3dfd708cc1b2a966ad454ca9ed125dd17dbadbcc
26239 Author: Wolfgang Denk <wd@denx.de>
26240 Date: Wed Jan 2 12:38:43 2008 +0100
26242 Minor coding style cleanup.
26244 Signed-off-by: Wolfgang Denk <wd@denx.de>
26246 commit e174ac34adf5d5653df12bc3cf19c52063a71269
26247 Author: Stefan Roese <sr@denx.de>
26248 Date: Fri Dec 28 17:29:56 2007 +0100
26250 ppc4xx: Coding style cleanup
26252 Signed-off-by: Stefan Roese <sr@denx.de>
26254 commit 8ba132cab18ae438b6dd5b0214c28a8fc0d976e5
26255 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26256 Date: Fri Dec 28 17:07:24 2007 +0100
26258 ppc4xx: Complete PMC440 board support
26260 This patch brings the PMC440 board configuration file.
26261 Finally it enables the PMC440 board support.
26263 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26265 commit 407843a582560fc5231299561ab3c2b6b6cd3397
26266 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26267 Date: Fri Dec 28 17:07:18 2007 +0100
26269 ppc4xx: Add FPGA support and BSP commands for PMC440 boards
26271 This patch adds some BSP commands and FPGA booting support
26272 for esd's PMC440 boards.
26274 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26276 commit 72c5d52aedcce35e4b4fa5895605554825b6a76f
26277 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26278 Date: Fri Dec 28 17:07:14 2007 +0100
26280 ppc4xx: Add initial esd PMC440 board files
26282 This patch adds the first files for the new esd PMC440 boards.
26283 The next two patches will complete the PMC440 board support.
26285 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26287 commit f6e0f1f61896ce7729ba1bcea2ffbd138d3947f5
26288 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26289 Date: Fri Dec 28 17:10:36 2007 +0100
26291 ppc4xx: Add EEPROM write protection for PLU405 boards + misc. updates
26293 - add EEPROM write protection for esd PLU405 boards.
26294 - initialize NAND GPIOs
26295 - use correct io accessors
26298 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26300 commit 77660c4b59055d621d2a8595bd4c18bb277268fc
26301 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26302 Date: Fri Dec 28 17:10:44 2007 +0100
26304 ppc4xx: use correct io accessors for esd's LCD code
26306 This patch fixes esd's LCD dectection code to work correctly with
26307 newer gcc versions.
26309 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26311 commit b56bd0fcfc1c73db722e3462c8a9bf607ba7775e
26312 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26313 Date: Fri Dec 28 17:10:42 2007 +0100
26315 ppc4xx: Maintenance patch for VOH405 boards
26317 - add EEPROM write protection
26318 - initialize NAND GPIOs
26319 - use correct io accessors
26320 - slow down I2C clock to 100kHz
26321 - enable ext. I2C bus
26324 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26326 commit c05569066dbcba3fdf36d4d1943df265dc316a86
26327 Author: Stefan Roese <sr@denx.de>
26328 Date: Fri Dec 28 16:08:08 2007 +0100
26330 ppc4xx: Enable 405EP PCI arbiter per default on all boards
26332 In an attmemt to clean up the 4xx start.S file, I removed the enabling
26333 of the internal 405EP PCI arbiter. This is needed for multiple other
26334 405EP platforms, like most of the esd 405EP. Now the internal PCI
26335 arbiter is enabled again per default as it has been before.
26337 Signed-off-by: Stefan Roese <sr@denx.de>
26338 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26340 commit bec9264616fb78273a1d93e87ff4b0b67c7bec1b
26341 Author: Stefan Roese <sr@denx.de>
26342 Date: Fri Dec 28 15:53:46 2007 +0100
26344 ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
26346 Signed-off-by: Stefan Roese <sr@denx.de>
26347 Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26349 commit fb83a65c60ab5ca12358b75f1257e5eee6cdbf79
26350 Author: Stefan Roese <sr@denx.de>
26351 Date: Fri Dec 28 06:06:04 2007 +0100
26353 ppc4xx: Fix compilation problem of kilauea/haleakala nand booting target
26355 Use correct link to nand_ecc now located in drivers/mtd/nand/ for the
26356 platforms mentioned above.
26358 Signed-off-by: Stefan Roese <sr@denx.de>
26360 commit b568fd25574181a3b12ae3d66b2913903442cb83
26361 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26362 Date: Thu Dec 27 17:03:46 2007 +0100
26364 Remove CPCI440 board
26366 This board never left prototyping state and it
26367 became a millstone round my neck. So remove it.
26369 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26371 commit c591dffe0cbacd896ccbad06011fe6d6afa080da
26372 Author: Larry Johnson <lrj@arlinx.com>
26373 Date: Thu Dec 27 11:28:51 2007 -0500
26375 Add support for Korat PPC440EPx board
26377 These patches add support for the PPC440EPx-based "Korat" board to
26378 U-Boot. They are based primarily on support for the Sequoia board.
26380 Signed-off-by: Larry Johnson <lrj@acm.org>
26382 commit 87dc096829e6a6363f4fdd73653b0093a85adbe0
26383 Author: Larry Johnson <lrj@arlinx.com>
26384 Date: Sat Dec 22 15:16:25 2007 -0500
26386 Add configuration file for Korat board
26388 This patch supplies the configuration file for the Korat PPC440EPx-
26391 Signed-off-by: Larry Johnson <lrj@acm.org>
26393 commit 8eb52d5d982b764b39c88d9d1064d56c5397bfa5
26394 Author: Larry Johnson <lrj@arlinx.com>
26395 Date: Sat Dec 22 15:16:11 2007 -0500
26397 Add denali_data_eye.o and denali_spd_ddr2.o to PPC4xx Makefile
26399 Signed-off-by: Larry Johnson <lrj@acm.org>
26401 commit aba19604d848b2838cfb9ebe818909e6a216058e
26402 Author: Larry Johnson <lrj@arlinx.com>
26403 Date: Thu Dec 27 10:54:48 2007 -0500
26405 Add 440EPx DDR2 SPD DIMM support
26407 This patch adds SPD DDR2 support for the 440EPx ("Denali") SDRAM
26408 controller. It should also work on the 440GRx. It is based on the DDR2
26409 SPD code for the 440EP/440EPx, but makes no provision for DDR1 support.
26411 This code has been tested on prototype Korat boards with three Kingston
26412 DIMMS: 512 MiB ECC (one rank), 512 MiB non-ECC (one rank) and 1 GiB ECC
26413 (two ranks). The Korat board has a single DIMM socket, but support has
26414 been provided (though not tested) for boards with two DIMM sockets.
26416 Signed-off-by: Larry Johnson <lrj@acm.org>
26418 commit 8a24a6963002cb867d5a6b70e3560f0b1467f55f
26419 Author: Larry Johnson <lrj@arlinx.com>
26420 Date: Sat Dec 22 15:15:30 2007 -0500
26422 Copy 440EPx/GRx SDRAM data-eye search to common directory
26424 This patch creates a non-board-specific file for performing the SDRAM
26425 data-eye search. It also adds ECC error checking to the test of valid
26426 data on readback when ECC is enabled.
26428 Signed-off-by: Larry Johnson <lrj@acm.org>
26430 commit c46f53333b22b1f9098676bea8884fc7db820cf3
26431 Author: Larry Johnson <lrj@arlinx.com>
26432 Date: Sat Dec 22 15:15:13 2007 -0500
26434 Add definitions for 440EPx/GRx SDRAM controller to ppc440.h
26436 This patch adds the Denali SDRAM controller definitions to "ppc440.h".
26437 It also fixes two typos in the definitions, so the board-specific
26438 "sdram.h" files containing these definitions are also fixed to avoid
26441 Signed-off-by: Larry Johnson <lrj@acm.org>
26443 commit c348578bf612d0c56d8d376d23cae16defbd86af
26444 Author: Larry Johnson <lrj@arlinx.com>
26445 Date: Thu Dec 27 10:50:55 2007 -0500
26447 Add Ethernet 1000BASE-X support for PPC4xx
26449 This patch adds a new switch: "CONFIG_PHY_DYNAMIC_ANEG". When this symbol
26450 is defined, the PHY will advertise it's capabilities for autonegotiation
26451 based on the capabilities shown in the PHY's status registers, including
26452 1000BASE-X. When "CONFIG_PHY_DYNAMIC_ANEG" is not defined, the PHY will
26453 advertise hard-coded capabilities, as before.
26455 Signed-off-by: Larry Johnson <lrj@acm.org>
26457 commit 9e2c347151db5ae8acf5f18b99493cd53e6637e3
26458 Author: Larry Johnson <lrj@arlinx.com>
26459 Date: Thu Dec 27 09:52:17 2007 -0500
26461 Add driver for National Semiconductor LM73 temperature sensor
26463 This driver is based on the driver for the LM75.
26465 Signed-off-by: Larry Johnson <lrj@acm.org>
26467 commit 12618278688ea9b3d76536960a5ad2e3790fac40
26468 Author: Larry Johnson <lrj@arlinx.com>
26469 Date: Sat Dec 22 15:14:00 2007 -0500
26471 Add driver for STMicroelectronics M41T60 RTC
26473 This driver is based on the driver for the M41T11. In the intended
26474 application, the RTC will be powered by a large capacitor, rather than a
26475 battery. The driver therefore checks to see whether the RTC has lost
26476 power. The chip's OUT bit is normally reset from its power-up state. If
26477 the OUT bit is read as set, or if the date and time are not valid, then the
26478 RTC is assumed to have lost power, and its date and time are reset to
26479 1900-01-01 00:00:00.
26481 Support for adjusting the speed of the clock to improve accuracy is
26482 provided through an environment variable.
26484 Signed-off-by: Larry Johnson <lrj@acm.org>
26486 commit d3471173e14b7544bb60339eda8d3d3906694b0a
26487 Author: Larry Johnson <lrj@arlinx.com>
26488 Date: Sat Dec 22 15:34:39 2007 -0500
26490 Use out_be32() and friends to access memory-mapped registers in sequoia.c
26492 Signed-off-by: Larry Johnson <lrj@acm.org>
26494 commit c68f59fe3ec16769f82b5fca7421983c336d3aac
26495 Author: Larry Johnson <lrj@arlinx.com>
26496 Date: Sat Dec 22 15:34:20 2007 -0500
26498 Use definitions from "asm-ppc/mmu.h" in init.S for Sequoia
26500 Signed-off-by: Larry Johnson <lrj@acm.org>
26502 commit 0d9cdeac1d3fa8d62ed7d883acc950c364f5bda8
26503 Author: Larry Johnson <lrj@arlinx.com>
26504 Date: Sat Dec 22 15:23:50 2007 -0500
26506 Cosmetic changes to ECC POST for AMCC Denali core
26508 Signed-off-by: Larry Johnson <lrj@acm.org>
26510 commit 2e583d6c81034f80a267b89fa55498ae063ccef1
26511 Author: Stefan Roese <sr@denx.de>
26512 Date: Wed Dec 26 20:20:19 2007 +0100
26514 ppc4xx: Fix compilation problem in 405 cache POST test
26516 Signed-off-by: Stefan Roese <sr@denx.de>
26518 commit 42d55ea0bde06e47d5a3b49b0d91002acd8e5708
26519 Author: Stefan Roese <sr@denx.de>
26520 Date: Sat Dec 22 12:20:09 2007 +0100
26522 ppc4xx: Move virtual address of POST cache test to bigger address
26524 On Sequoia & LWMON5 the virtual address of the POST cache test is now
26525 moved to a bigger address. This enables usage of more memory on those
26528 Signed-off-by: Stefan Roese <sr@denx.de>
26530 commit d91722102cf63f77a0148ed3f3d54a26d87575e9
26531 Author: Stefan Roese <sr@denx.de>
26532 Date: Sat Dec 22 12:18:26 2007 +0100
26534 ppc4xx: Fix problem in 44x cache POST routine
26536 As repoted by Larry Johnson, running "diag run cache" caused a crash
26537 in U-Boot. This problem was introduced by a patch that removed the
26538 TLB entry for the cache test after the test has completed. Since this
26539 TLB was only setup once, a 2nd attempt to run this cache test
26540 failed with a crash. Now this TLB entry is created every time the
26543 Signed-off-by: Stefan Roese <sr@denx.de>
26545 commit b0265b576bb8fa9465f99e99c323768b562fadc2
26546 Author: Stefan Roese <sr@denx.de>
26547 Date: Fri Dec 21 07:51:29 2007 +0100
26549 ppc4xx: Update Makalu fdt support
26551 Signed-off-by: Stefan Roese <sr@denx.de>
26553 commit bf8324e4a50758daff8cddd04c6a2ff8ed775bea
26554 Author: Stefan Roese <sr@denx.de>
26555 Date: Wed Dec 19 09:05:40 2007 +0100
26557 ppc4xx: Add fdt support to AMCC Katmai eval board
26559 Signed-off-by: Stefan Roese <sr@denx.de>
26561 commit 328a340392a5df9aaf00792be989df73e750859e
26562 Author: Stefan Roese <sr@denx.de>
26563 Date: Tue Dec 18 08:44:51 2007 +0100
26565 ppc4xx: fdt: Cleanup setup of cpu node setup
26567 Now the cpu node setup ("timebase-frequency" and "clock-frequency") is
26568 without using the absolute path to the cpu node. This makes it possible
26569 to use this U-Boot version with both versions of cpu-node naming
26570 "cpu@0" and the former "PowerPC,440EPx@0".
26572 Signed-off-by: Stefan Roese <sr@denx.de>
26574 commit 7812bc4a2e2436ebbc0ce5b4e99c1dfc2e77eb5b
26575 Author: Stefan Roese <sr@denx.de>
26576 Date: Mon Dec 17 17:26:21 2007 +0100
26578 ppc4xx: Fix lwmon5 compilation problem
26580 Now that the 440EPx ECC test is not board specific anymore
26581 remove this Makefile.
26583 Signed-off-by: Stefan Roese <sr@denx.de>
26585 commit 42ed33ffe135f618680f9d6e9712eb35a85bcb62
26586 Author: Anatolij Gustschin <agustschin@t-online.de>
26587 Date: Wed Dec 5 17:43:20 2007 +0100
26589 Fix ppc4xx clear_bss() code
26591 ppc4xx clear_bss() fails if BSS segment size is not
26592 divisible by 4 without remainder. This patch provides
26593 fix for this problem.
26595 Signed-off-by: Anatolij Gustschin <agust@denx.de>
26597 commit 85dc2a7f82d11e17f0ca2a448118aed7f7a4b85d
26598 Author: Niklaus Giger <niklausgiger@gmx.ch>
26599 Date: Fri Nov 30 18:35:11 2007 +0100
26601 PPC4xx: Minimal changes to add vxWorks support
26603 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
26605 commit 052440b022ca8981d39b6f8c10d1aa6326f47480
26606 Author: Markus Klotzbücher <mk@denx.de>
26607 Date: Fri Nov 23 13:09:18 2007 +0100
26609 ppc4xx: Add CONFIG_BOOTP_SUBNETMASK to Sequoia board config
26611 When using dhcp/bootp the "netmask" environment variable is not
26612 set because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
26613 desireable, so the following patch adds this this option to the board
26616 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
26617 Signed-off-by: Stefan Roese <sr@denx.de>
26619 commit a724a9b40c7fbeb6ade193ca52321b441eaecb4e
26620 Author: Larry Johnson <lrj@arlinx.com>
26621 Date: Sat Oct 27 12:48:15 2007 -0400
26623 Fix/enhance ECC POST for 440EPx/GRx
26625 This patch allows the ECC POST to be used for different boards with the
26626 PPC440 Denali SDRAM controller. Modifications include skipping the test
26627 if ECC is not enabled (as for non-ECC DIMMs) and adding synchronization
26628 to prevent timing errors.
26630 Signed-off-by: Larry Johnson <lrj@acm.org>
26632 commit 454a6cf8d498f70d2b3e18f07837603eb24b12d4
26633 Author: Larry Johnson <lrj@arlinx.com>
26634 Date: Sat Oct 27 12:48:05 2007 -0400
26636 PPC4xx: Move/rename ECC POST for 440EPx/GRx
26638 Signed-off-by: Larry Johnson <lrj@acm.org>
26640 commit c29d2d3680046d430022c55e50fcb27f5866517e
26641 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26642 Date: Fri Dec 14 11:20:33 2007 +0100
26644 ppc4xx: use correct io accessors for 4xx ethernet POST
26646 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26648 commit ba79fde58a48c0a6ff8e2a96caba951594142203
26649 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26650 Date: Fri Dec 14 11:19:56 2007 +0100
26652 ppc4xx: fix flush + invalidate_dcache_range arguments
26654 flush + invalidate_dcache_range() expect the start and stop+1 address.
26655 So the stop address is the first address behind (!) the range.
26657 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
26659 commit 871e6ce188a7c6bc7321bcf8372857035d20f1cd
26660 Author: Stefan Roese <sr@denx.de>
26661 Date: Fri Dec 14 08:41:29 2007 +0100
26663 ppc4xx: fdt: use fdt_fixup_ethernet()
26665 By using aliases in the dts file, the ethernet node fixup is
26666 much easier with the recently added functions.
26668 Please note that the dts file needs the aliases for this to work.
26670 Signed-off-by: Stefan Roese <sr@denx.de>
26672 commit 136288847e3b04f2ff357a067ad45e10afa0a24c
26673 Author: Stefan Roese <sr@denx.de>
26674 Date: Thu Dec 13 14:52:53 2007 +0100
26676 ppc4xx: Bring 4xx fdt support up-to-date
26678 This patch update the 4xx fdt support. It enabled fdt booting
26679 on the AMCC Kilauea and Sequoia for now. More can follow later
26682 Signed-off-by: Stefan Roese <sr@denx.de>
26684 commit 0dc80e2759fba859ccc4cdadc633577ca2971f3e
26685 Author: Stefan Roese <sr@denx.de>
26686 Date: Thu Dec 27 07:50:54 2007 +0100
26688 cfi_flash: Add missing check for erased dest to flash_write_cfibuffer()
26690 The check for an sufficiently erased destination was missing in the
26691 buffered write function of the cfi flash driver (when
26692 CFG_FLASH_USE_BUFFER_WRITE is defined). This patch adds this check to that
26693 writing to such a region will fail with the currect error message.
26695 Signed-off-by: Stefan Roese <sr@denx.de>
26697 commit 33ed73bc0e38d0f2b5c183d4629d8f207e5b9994
26698 Author: Martin Krause <martin.krause@tqs.de>
26699 Date: Mon Nov 12 10:56:17 2007 +0100
26701 Some configuration updates for the TQM5200 based TB5200 board:
26703 - enable command line history
26704 - increase malloc space (because of bigger flash sectors)
26706 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26708 commit e318d9e9021a0af7508171f84ed09d0e79f0284e
26709 Author: Martin Krause <martin.krause@tqs.de>
26710 Date: Thu Sep 27 11:10:08 2007 +0200
26712 TQM8xx: use the CFI flash driver on all TQM8xx boards
26714 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26716 commit 11d9eec479b470eab9242ab937fca70a876d9376
26717 Author: Martin Krause <martin.krause@tqs.de>
26718 Date: Wed Sep 26 17:55:56 2007 +0200
26720 TQM885D: adjust for doubled flash sector size + some minor fixes
26722 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26724 commit 22d1a56cbfb0bff34f477b4db6a55d076d829b83
26725 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26726 Date: Wed Sep 26 17:55:54 2007 +0200
26728 TQM885D: Exchanged SDRAM timing by a more relaxed timing.
26730 CAS-Latency=2, Write Recovery Time tWR=2
26731 The max. supported bus frequency is 66 MHz. Therefore, changed
26732 threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.
26734 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26736 commit b988b8cd443989be65161888eea0127ad03f846f
26737 Author: Martin Krause <martin.krause@tqs.de>
26738 Date: Wed Sep 26 17:55:56 2007 +0200
26740 TQM885D: use calculated cpuclk instead of measuring it
26742 On the TQM885D the measurement of cpuclk with the PIT reference
26743 timer ist not necessary. Since all module variants use the same
26744 external 10 MHz oscillator, the cpuclk only depends on the PLL
26745 configuration - which is readable by software.
26747 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26749 commit 492c7049869348d31168de8dad89651315e468e0
26750 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26751 Date: Thu Sep 27 14:54:46 2007 +0200
26753 TQM885D: fix SDRAM refresh
26755 At 133 MHz the current SDRAM refresh rate is too fast
26756 (measured 4 * 1.17 us).
26757 CFG_MAMR_PTA changes from 39 to 128. This result
26758 in a refresh rate of 4 * 7.8 us at the default clock
26759 66 MHz. At 133 MHz the value will be then 4 * 3.8 us.
26760 This is a compromise until a new method is found to
26761 adjust the refresh rate.
26763 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26765 commit dabad4b9bc46908e301f73ce76b38b23626a96e9
26766 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
26767 Date: Thu Sep 27 14:54:46 2007 +0200
26769 TQM860M: Support for 10col SDRAMs, max. 128 MiB
26771 Signed-off-by: Martin Krause <martin.krause@tqs.de>
26773 commit 61fb15c516fef5631e305f1976d7b3a679725856
26774 Author: Wolfgang Denk <wd@denx.de>
26775 Date: Thu Dec 27 01:52:50 2007 +0100
26777 Fix coding style issues; update CHANGELOG.
26779 Signed-off-by: Wolfgang Denk <wd@denx.de>
26781 commit 467bcee11fe26ad422f2de971aa70866079870f2
26782 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26783 Date: Fri Dec 14 15:36:18 2007 +0100
26785 cfi_flash: Add manufacturer-specific fixups
26787 Run fixups based on the JEDEC manufacturer ID independent of the
26790 This changes current behaviour: Previously, geometry reversal for AMD
26791 chips were done based on the command set ID, while they are now done
26792 based on the JEDEC manufacturer and device ID.
26794 Also add fixup for top-boot Atmel chips. A fixup is needed for
26795 AT49BV6416(T) too, but since u-boot currently only reads the low byte
26796 of the device ID, there's no way to tell it apart from AT49BV642D,
26797 which should not have this fixup. Since AT49BV642D support is
26798 necessary to get ATNGW100 board support into mainline, I've commented
26799 out the fixup for now.
26801 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26803 commit 0ddf06ddf6b4bd057ad4c5f0dffea7870ba06a2a
26804 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26805 Date: Fri Dec 14 15:36:17 2007 +0100
26807 cfi_flash: Add cmdset-specific init functions
26809 Move things like reading JEDEC IDs and fixing up geometry reversal
26810 into separate functions. The geometry reversal fixup is now performed
26811 by altering the qry structure directly, which makes the sector init
26812 code slightly cleaner.
26814 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26816 commit e23741f4a6d8047520ef0d4971762749b3587d32
26817 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26818 Date: Fri Dec 14 15:36:16 2007 +0100
26820 cfi_flash: Read whole QRY structure in one go
26822 Read out the whole CFI Standard Query structure after successful cfi
26823 identification. This allows subsequent code to access this information
26824 directly without having to go through flash_read_uchar() and friends.
26826 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26828 commit df9c25ea04b38a0e05d4f8c73c5cc144cdafa7db
26829 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26830 Date: Mon Dec 17 11:02:44 2007 +0100
26832 AVR32: Fix logic inversion in disable_interrupts()
26834 disable_interrupts() should return nonzero if interrupts were
26835 _enabled_ before, not disabled.
26837 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26839 commit acac475212cbedb17b321a363a1c878e2b47b37f
26840 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26841 Date: Fri Dec 14 16:51:22 2007 +0100
26843 AVR32: Enable interrupts at bootup
26845 The timer code depends on the timer interrupt to keep track of the
26846 upper 32 bits of the cycle counter. This obviously doesn't work when
26847 interrupts are disabled the whole time.
26849 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26851 commit 9570bcd87f4db255514f43b6701746c412f8fef0
26852 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26853 Date: Thu Nov 15 10:03:45 2007 +0100
26855 AVR32: Fix wrong pin setup for USART3
26857 As reported by Gerhard Berghofer:
26859 in "gpio_enable_usart3" the correct pins for USART 3 are PB17 and PB18
26860 instead of PB18 and PB19.
26862 which is obviously correct. There's currently no code that uses
26863 USART3, but custom boards may run into problems.
26865 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26867 commit 09ea0de03dcc3ee7af045b0b572227bda2c1c918
26868 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26869 Date: Thu Nov 1 12:44:20 2007 +0100
26871 README: Remove ATSTK1000 daughterboard list
26873 As noted by Kim Phillips, these lists tend to become out of date.
26875 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26877 commit c81cbbad21cb0ae983e2e796211202234cdc8be2
26878 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26879 Date: Tue Oct 30 14:56:36 2007 +0100
26881 Add ATSTK100[234] to MAINTAINERS
26883 Add all the ATSTK1000 daughterboards to MAINTAINERS along with their
26884 "mother". Also update the entry for ATSTK1000 to be not only about the
26885 AP7000 CPU; it's intended to handle all CPUs in the AT32AP family.
26887 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26889 commit 64ff2357b1727213803591813dbc779c924bf772
26890 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26891 Date: Mon Oct 29 13:02:54 2007 +0100
26893 AVR32: Add support for the ATSTK1004 board
26895 ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU,
26896 which is a derivative of AT32AP7000.
26898 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26900 commit 667568db157f374b85abd7e03596ddd1f0b25681
26901 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26902 Date: Mon Oct 29 13:02:54 2007 +0100
26904 AVR32: Add support for the ATSTK1003 board
26906 ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU,
26907 which is a derivative of AT32AP7000.
26909 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26911 commit 5fee84a794a51ec830548cda485a770efb018b92
26912 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26913 Date: Mon Oct 29 13:23:33 2007 +0100
26915 AVR32: Make some AT32AP700x peripherals optional
26917 Add a chip-features file providing definitions of the form
26919 AT32AP700x_CHIP_HAS_<peripheral>
26921 to indicate the availability of the given peripheral on the currently
26924 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26926 commit 36f28f8a9605ee5dcfa330482cfc62171261af97
26927 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26928 Date: Mon Oct 29 13:09:56 2007 +0100
26930 AVR32: Rename at32ap7000 -> at32ap700x
26932 The SoC-specific code for all the AT32AP700x CPUs is practically
26933 identical; the only difference is that some chips have less features
26934 than others. By doing this rename, we can add support for the AP7000
26935 derivatives simply by making some features conditional.
26937 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26939 commit 4d5fa99c73f354e7cf985efcf417ea55ca2f6a5e
26940 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26941 Date: Fri Jun 29 18:22:34 2007 +0200
26943 atmel_mci: Show SR when block read fails
26945 Show controller status as well as card status when an error occurs
26948 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26950 commit 8697e6a19b10f514511b6a9c86de88bd108c4f8d
26951 Author: Stefan Roese <sr@denx.de>
26952 Date: Thu Dec 13 14:52:53 2007 +0100
26954 ppc4xx: Bring 4xx fdt support up-to-date
26956 This patch update the 4xx fdt support. It enabled fdt booting
26957 on the AMCC Kilauea and Sequoia for now. More can follow later
26960 Signed-off-by: Stefan Roese <sr@denx.de>
26962 commit 12d30aa79779c2aa7a998bbae4c075f822a53004
26963 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26964 Date: Thu Dec 13 12:56:34 2007 +0100
26966 cfi_flash: Use map_physmem() and unmap_physmem()
26968 Use map_physmem() and unmap_physmem() to convert from physical to
26969 virtual addresses. This gives the arch a chance to provide an uncached
26970 mapping for flash accesses.
26972 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26974 commit 4d7d6936eb29af7cca330937808312aa5f61454d
26975 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26976 Date: Thu Dec 13 12:56:33 2007 +0100
26978 Introduce map_physmem() and unmap_physmem()
26980 map_physmem() returns a virtual address which can be used to access a
26981 given physical address without involving the cache. unmap_physmem()
26982 should be called when the virtual address returned by map_physmem() is
26985 This patch adds a stub implementation which simply returns the
26986 physical address cast to a uchar * for all architectures except AVR32,
26987 which converts the physical address to an uncached virtual mapping.
26988 unmap_physmem() is a no-op on all architectures, but if any
26989 architecture needs to do such mappings through the TLB, this is the
26990 hook where those TLB entries can be invalidated.
26992 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
26994 commit cdbaefb5f5f03e54455d0439dcf6dbd97ead1f9d
26995 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
26996 Date: Thu Dec 13 12:56:32 2007 +0100
26998 cfi_flash: Introduce read and write accessors
27000 Introduce flash_read{8,16,32,64) and flash_write{8,16,32,64} and use
27001 them to access the flash memory. This makes it clearer when the flash
27002 is actually being accessed; merely dereferencing a volatile pointer
27003 looks just like any other kind of access.
27005 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27007 commit 812711ce6b3a386125dcf0d6a59588e461abbb87
27008 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27009 Date: Thu Dec 13 12:56:31 2007 +0100
27011 Implement __raw_{read,write}[bwl] on all architectures
27013 This adds implementations of __raw_read[bwl] and __raw_write[bwl] to
27014 m68k, ppc, nios and nios2. The m68k and ppc implementations were taken
27017 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27019 commit be60a9021c82fc5aecd5b2b1fc96f70a9c81bbcd
27020 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27021 Date: Sat Oct 6 18:55:36 2007 +0200
27023 cfi_flash: Reorder functions and eliminate extra prototypes
27025 Reorder the functions in cfi_flash.c so that each function only uses
27026 functions that have been defined before it. This allows the static
27027 prototype declarations near the top to be eliminated and might allow
27028 gcc to do a better job inlining functions.
27030 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27032 commit 3055793bcbdf24b1f8117f606ffb766d32eb766f
27033 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27034 Date: Thu Dec 13 12:56:29 2007 +0100
27036 cfi_flash: Make some needlessly global functions static
27038 Make functions not declared in any header file static.
27040 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27042 commit 7e5b9b471518c5652febc68ba62b432193d6abf4
27043 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
27044 Date: Thu Dec 13 12:56:28 2007 +0100
27046 cfi_flash: Break long lines
27048 This patch tries to keep all lines in the cfi_flash driver below 80
27049 columns. There are a few lines left which don't fit this requirement
27050 because I couldn't find any trivial way to break them (i.e. it would
27051 take some restructuring, which I intend to do in a later patch.)
27053 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
27055 commit 42026c9cb3a76849b41e6e24abfb7b56807a5c1a
27056 Author: Bartlomiej Sieka <tur@semihalf.com>
27057 Date: Tue Dec 11 13:59:57 2007 +0100
27059 CFI: synchronize command offsets with Linux CFI driver
27061 Fixes non-working CFI Flash on the Inka4x0 board.
27063 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
27065 commit 8ff3de61fc5f9b3b21647bce081a3b7f710f0d4d
27066 Author: Kumar Gala <galak@kernel.crashing.org>
27067 Date: Fri Dec 7 12:17:34 2007 -0600
27069 Handle MPC85xx PCIe reset errata (PCI-Ex 38)
27071 On the MPC85xx boards that have PCIe enable the PCIe errata fix.
27072 (MPC8544DS, MPC8548CDS, MPC8568MDS).
27074 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27076 commit 82ac8c97145a4c3bf8b3dbfad00fa96e920f9b9c
27077 Author: Kumar Gala <galak@kernel.crashing.org>
27078 Date: Fri Dec 7 12:04:30 2007 -0600
27080 Update Freescale MPC85xx ADS/CDS/MDS board config
27082 * Enabled CONFIG_CMD_ELF
27084 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27086 commit d435793229ce29a42797c1edc39f5b34f987f91a
27087 Author: Kumar Gala <galak@kernel.crashing.org>
27088 Date: Fri Dec 7 04:59:26 2007 -0600
27090 Handle Asynchronous DDR clock on 85xx
27092 The MPC8572 introduces the concept of an asynchronous DDR clock with
27093 regards to the platform clock.
27095 Introduce get_ddr_freq() to report the DDR freq regardless of sync/async
27098 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27100 commit 22abb2d2eaf7b795a6923c6273ec9cb53fda9a10
27101 Author: Kumar Gala <galak@kernel.crashing.org>
27102 Date: Thu Nov 29 10:34:28 2007 -0600
27104 Update Freescale MPC85xx ADS/CDS/MDS board config
27106 * Removed some misc environment setup
27107 * Enabled CONFIG_CMDLINE_EDITING
27109 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27111 commit 415a613babb84d5e5d5b42e8e553868c71fc3a64
27112 Author: Kumar Gala <galak@kernel.crashing.org>
27113 Date: Thu Nov 29 10:47:44 2007 -0600
27115 Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.
27117 Minor path corrections needed to ensure buildability.
27119 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27121 commit c2d943ffbfd3359b3b45d177b437379d2cb86fbf
27122 Author: Kumar Gala <galak@kernel.crashing.org>
27123 Date: Thu Nov 29 10:16:18 2007 -0600
27125 Move the MPC8540 ADS board under board/freescale.
27127 Minor path corrections needed to ensure buildability.
27129 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27131 commit 870ceac5b3a3486c109396e005af81ae762b5710
27132 Author: Kumar Gala <galak@kernel.crashing.org>
27133 Date: Thu Nov 29 10:14:50 2007 -0600
27135 Move the MPC8560 ADS board under board/freescale.
27137 Minor path corrections needed to ensure buildability.
27139 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27141 commit acbca876fb3fec25cd9c55b0efc81ff618ff5262
27142 Author: Kumar Gala <galak@kernel.crashing.org>
27143 Date: Thu Nov 29 10:13:47 2007 -0600
27145 Move the MPC8568 MDS board under board/freescale.
27147 Minor path corrections needed to ensure buildability.
27149 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27151 commit a853d56c59b33415304531443633808736acfc6e
27152 Author: Kumar Gala <galak@kernel.crashing.org>
27153 Date: Thu Nov 29 02:18:59 2007 -0600
27155 Use standard LAWAR_TRGT_IF_* defines for LAW setup on 85xx
27157 We already had defines for LAWAR_TRGT_IF_* that we should use
27158 rather than creating new ones. Also, added some missing defines for
27161 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27163 commit 04db400892da37b76a585e332a0c137954ad2015
27164 Author: Kumar Gala <galak@kernel.crashing.org>
27165 Date: Thu Nov 29 02:10:09 2007 -0600
27167 Stop using immap_t on 85xx
27169 In the future the offsets to various blocks may not be in same location.
27170 Move to using CFG_MPC85xx_*_ADDR as the base of the registers
27171 instead of getting it via &immap.
27173 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27175 commit 2714223f8e04ab3e4133ff65872eef366d90bfea
27176 Author: Kumar Gala <galak@kernel.crashing.org>
27177 Date: Thu Nov 29 01:23:09 2007 -0600
27179 Remove CONFIG_OF_FLAT_TREE related code from mpc85xx since we now use libfdt
27181 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27183 commit c480861bf000156e6a3e932c258db59ff2212dd3
27184 Author: Kumar Gala <galak@kernel.crashing.org>
27185 Date: Thu Nov 29 01:06:19 2007 -0600
27187 Update MPC8568 MDS to use libfdt
27189 Updated the MPC8568 MDS config to use libfdt and assume use of aliases for
27190 ethernet, pci, and serial for the various fixups that are done.
27192 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27194 commit 1563f56e0c68f6920f956382d6d13bee3f01c0f7
27195 Author: Haiying Wang <Haiying.Wang@freescale.com>
27196 Date: Wed Nov 14 15:52:06 2007 -0500
27198 Add PCI Express support on MPC8568MDS
27200 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27201 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27203 commit b90d25497625b90ffa3f2911a0895ca237556ff5
27204 Author: Kumar Gala <galak@kernel.crashing.org>
27205 Date: Thu Nov 29 00:11:44 2007 -0600
27207 Update MPC85xx CDS to use libfdt
27209 Updated the MPC85xx CDS config to use libfdt and assume use of aliases for
27210 ethernet, pci, and serial for the various fixups that are done.
27212 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27214 commit 0fd5ec66b10521a057ad73e69ab5f0f9eafba255
27215 Author: Kumar Gala <galak@kernel.crashing.org>
27216 Date: Wed Nov 28 22:54:27 2007 -0600
27218 Update MPC8540 ADS to use libfdt
27220 Updated the MPC8540 ADS config to use libfdt and assume use of aliases for
27221 ethernet, pci, and serial for the various fixups that are done.
27223 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27225 commit 5ce715802f6c50dc78b3405b92f184b1e3710519
27226 Author: Kumar Gala <galak@kernel.crashing.org>
27227 Date: Wed Nov 28 22:40:31 2007 -0600
27229 Update MPC8560 ADS to use libfdt
27231 Updated the MPC8560 ADS config to use libfdt and assume use of aliases for
27232 ethernet, pci, and serial for the various fixups that are done.
27234 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27236 commit aafeefbdb8b029f5ca2a195598d0a501a606eea9
27237 Author: Kumar Gala <galak@kernel.crashing.org>
27238 Date: Wed Nov 28 00:36:33 2007 -0600
27240 Stop using immap_t for cpm offset on 85xx
27242 In the future the offsets to various blocks may not be in same location.
27243 Move to using CFG_MPC85xx_CPM_ADDR as the base of the CPM registers
27244 instead of getting it via &immap->im_cpm.
27246 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27248 commit f59b55a5b8fcadaa99781ba48e7a38e956afa527
27249 Author: Kumar Gala <galak@kernel.crashing.org>
27250 Date: Tue Nov 27 23:25:02 2007 -0600
27252 Stop using immap_t for guts offset on 85xx
27254 In the future the offsets to various blocks may not be in same location.
27255 Move to using CFG_MPC85xx_GUTS_ADDR as the base of the guts registers
27256 instead of getting it via &immap->im_gur.
27258 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27260 commit 50c03c8cf494d91cdec39670d95337c743e16ec9
27261 Author: Kumar Gala <galak@kernel.crashing.org>
27262 Date: Tue Nov 27 22:42:34 2007 -0600
27264 Update MPC8544 DS config
27266 * Removed HAS_ETH2/HAS_ETH3 - MPC8544 only has TSEC1/2
27267 * Removed some misc environment setup
27268 * Moved to using fdtfile & fdtaddr as fdt env var names
27269 * Enabled CONFIG_CMDLINE_EDITING
27271 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27273 commit addce57e2e4c49e77ffb2020a84690713bb18b47
27274 Author: Kumar Gala <galak@kernel.crashing.org>
27275 Date: Mon Nov 26 17:12:24 2007 -0600
27277 Update MPC8544DS to use libfdt
27279 Updated the MPC8544DS config to use libfdt and assume use of aliases for
27280 ethernet, pci, and serial for the various fixups that are done.
27282 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27284 commit f852ce72f100cabd1f11c21c085a0ad8eca9fb65
27285 Author: Kumar Gala <galak@kernel.crashing.org>
27286 Date: Thu Nov 29 00:15:30 2007 -0600
27288 Add libfdt based ft_cpu_setup for mpc85xx
27290 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27292 commit 3b9abdc448a1c2c6a4c2aa292724b4d1a05166a9
27293 Author: Stefan Roese <sr@denx.de>
27294 Date: Tue Dec 11 13:38:19 2007 +0100
27296 ppc4xx: Correct GPIO offset in gpio_config()
27298 Thanks to Gary Jennejohn for pointing this out.
27300 Signed-off-by: Stefan Roese <sr@denx.de>
27302 commit 8809a2713b1ceaf3da55d9d785470294f15de06a
27303 Author: Stefan Roese <sr@denx.de>
27304 Date: Tue Dec 11 11:46:01 2007 +0100
27306 rtc: Fix merging problem
27308 Signed-off-by: Stefan Roese <sr@denx.de>
27310 commit 7cfc12a7dcfdb350e2ab76db4dafcc30f7e77c2b
27311 Author: Stefan Roese <sr@denx.de>
27312 Date: Sat Dec 8 14:47:34 2007 +0100
27314 ppc4xx: 405EX: Correctly enable USB pins
27316 This patch selects the USB data pins in the 405EX GPIO and MFC (multi
27317 function control) registers. This is done for the AMCC Kilauea and
27318 Makalu eval boards.
27320 Signed-off-by: Stefan Roese <sr@denx.de>
27322 commit 9692c2734a47f23b44a0f68042a3e2ca8d1bfb39
27323 Author: Stefan Roese <sr@denx.de>
27324 Date: Sat Dec 8 08:25:09 2007 +0100
27326 CFI: Coding style cleanup
27328 Signed-off-by: Stefan Roese <sr@denx.de>
27330 commit 81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22
27331 Author: Michael Schwingen <michael@schwingen.org>
27332 Date: Fri Dec 7 23:35:02 2007 +0100
27334 CFI: support JEDEC flash roms in CFI-flash framework
27336 The following patch adds support for non-CFI flash ROMS, by hooking into the
27337 CFI flash code and using most of its code, as recently discussed here in the
27338 thread "Mixing CFI and non-CFI flashs".
27340 Signed-off-by: Michael Schwingen <michael@schwingen.org>
27341 Signed-off-by: Stefan Roese <sr@denx.de>
27343 commit c01b17dd856fa120b2970f50d9598546a4927ec3
27344 Author: Gerald Van Baren <vanbaren@cideas.com>
27345 Date: Wed Nov 28 21:24:50 2007 -0500
27347 Conditionally compile fdt_fixup_ethernet()
27349 Fix compiler warnings: On boards that don't have ethernets defined,
27350 don't compile fdt_fixup_ethernet().
27352 commit 246d4ae6bc282bc1841224e1c5fc49dc925e0bf7
27353 Author: Kumar Gala <galak@kernel.crashing.org>
27354 Date: Tue Nov 27 21:59:46 2007 -0600
27356 Convert boards that set memory node to use fdt_fixup_memory()
27358 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27360 commit 151c8b09b35eebe8fd9139cb6c1d91c27b22f058
27361 Author: Kumar Gala <galak@kernel.crashing.org>
27362 Date: Mon Nov 26 17:06:15 2007 -0600
27364 Added fdt_fixup_stdout that uses aliases to set linux,stdout-path
27366 We use a combination of the serialN alias and CONFIG_CONS_INDEX to
27367 determine which serial alias we should set linux,stdout-path to.
27369 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27371 commit 3c9272813fad84c691d0e4989bb18a3ffebdebfc
27372 Author: Kumar Gala <galak@kernel.crashing.org>
27373 Date: Mon Nov 26 14:57:45 2007 -0600
27375 Add common memory fixup function
27377 Add the function fdt_fixup_memory() to fixup the /memory node of the fdt
27379 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27381 commit 9c9109e7fcf7ac2ca19c95b8ac54b8d1c773b157
27382 Author: Kumar Gala <galak@kernel.crashing.org>
27383 Date: Mon Nov 26 11:19:12 2007 -0600
27385 Conditionally compile fdt_support.c
27387 Modify common/Makefile to conditionally compile fdt_support.c based
27388 on CONFIG_OF_LIBFDT.
27390 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27392 commit d88e7ba0980773479e1a64badb293116071b7ef0
27393 Author: Kumar Gala <galak@kernel.crashing.org>
27394 Date: Mon Nov 26 10:41:40 2007 -0600
27396 Fix build breakage due to libfdt import
27398 The IDS8247 got lost in the update and need an API update
27399 do to rename of functions in libfdt.
27401 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27403 commit 28f384b171bbf1fb2dafb1046e6d259a6b2f8714
27404 Author: Gerald Van Baren <vanbaren@cideas.com>
27405 Date: Fri Nov 23 19:43:20 2007 -0500
27407 Add spaces around the = in the fdt print format.
27409 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27411 commit 29592ecba3b932b9b152bcec6c0c0806412db4a3
27412 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27413 Date: Fri Dec 7 01:25:38 2007 +0900
27415 sh: Moved driver of the SuperH dependence
27417 The composition of the directory in the drivers/ changed.
27418 I moved SuperH serial driver and marubun PCMCIA driver.
27420 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27422 commit 41be969f4957115ed7b1fe8b890bfaee99d7a7a2
27423 Author: Wolfgang Denk <wd@denx.de>
27424 Date: Thu Dec 6 10:21:19 2007 +0100
27428 Signed-off-by: Wolfgang Denk <wd@denx.de>
27430 commit cf5933ba1e97a1cd8f5f24070e820f21d976eaeb
27431 Author: Wolfgang Denk <wd@denx.de>
27432 Date: Thu Dec 6 10:21:03 2007 +0100
27434 ADS5121 Board: fix compile problem.
27436 Signed-off-by: Wolfgang Denk <wd@denx.de>
27438 commit a27044b14a9e93678a82d7b35f202b93e7687abc
27439 Author: Stefan Roese <sr@denx.de>
27440 Date: Thu Dec 6 05:58:43 2007 +0100
27442 ppc4xx: Enable hardware-fix for PCI/DMA errata on AMCC 440SP/SPe boards
27444 This patch enables the hardware-fix for the PCI/DMA errata's 19+22 by
27445 setting the FIXD bit in the SDR0_MFR register. Here a description of the
27448 Problem Description
27449 ------------------------------
27450 If a DMA is performed between memory and PCI with the DMA 1 Controller
27451 using prefetch, and as a result uses a special purpose buffer selected by
27452 the PCIXn Bridge Options 1 Register (PCIXn_BRDGOPT1[RBP7] - bits 31-29),
27453 the first part of the transfer sequence is performed twice. The
27454 PPC440SPe PCI Controller requests more data than was needed such that in
27455 the case of enforce memory protection, a host CPU exception can occur.
27456 No data is corrupted, because data transfer is stopped in the PCI
27457 Controller. Prefetch enable is specified by setting DMA Configuration
27458 Register (I2O0_DMAx_CFG[DXEPD] - bit 31) to 0.
27460 Behavior that may be observed in a running system
27461 ---------------------------------------------------------------------------
27463 1. DMA performance is decreased because of the double access on the PCI bus
27465 2. If an illegal access to some address on the PCI bus is detected at the
27466 system level, a machine check or similar system error may occur.
27468 Workarounds Available
27469 ----------------------------------
27471 1. Do not program prefetch. Note that a prefetch command cannot be programmed
27472 without selecting a special purpose buffer.
27473 2. To avoid crossing a physical boundary of the PCI slave device, add 512
27474 bytes of address to the PCI address range.
27476 This patch was originally provided by Pravin M. Bathija <pbathija@amcc.com>
27477 from AMCC and slighly changed.
27479 Signed-off-by: Pravin M. Bathija <pbathija@amcc.com>
27480 Signed-off-by: Stefan Roese <sr@denx.de>
27482 commit a90921f71d225bf9e0f0fc7b8beadeb8001bf78a
27483 Author: Stefan Roese <sr@denx.de>
27484 Date: Tue Dec 4 16:29:48 2007 +0100
27486 ppc4xx: Yosemite/Yellowstone: Add DTT AD7414 support
27488 Signed-off-by: Stefan Roese <sr@denx.de>
27490 commit 8d4f040a3c15036a6ea25a9c39e7d89fefa8440d
27491 Author: Wolfgang Denk <wd@denx.de>
27492 Date: Mon Dec 3 00:15:28 2007 +0100
27494 Prepare for 1.3.1-rc1
27496 Signed-off-by: Wolfgang Denk <wd@denx.de>
27498 commit e15e33433e7c05111968dc9b434a52fd42cbd221
27499 Author: Stefan Roese <sr@denx.de>
27500 Date: Fri Nov 30 07:15:41 2007 +0100
27502 ppc4xx: Kilauea: Add PCIe reset assertion upon power-up
27504 This manual PCIe reset triggering solves the problem seen with the
27505 Intel EPRO/1000 card, which was not detected (link not established)
27506 upon power-up reset.
27508 Signed-off-by: Stefan Roese <sr@denx.de>
27510 commit 260eea5676ca46903a335686cc020b29c4ca46fe
27511 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27512 Date: Thu Nov 29 01:21:54 2007 +0900
27514 sh: Add SuperH boards maintainer to MAINTAINERS file
27516 Add MS7750SE and MS7722SE's board maintainer to MAINTAINERS file.
27518 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27520 commit aa9c4f1d22701a92347c1c81f34d12c8ad3a3747
27521 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27522 Date: Thu Nov 29 00:13:04 2007 +0900
27524 sh: Add ms7750se support in MAKEALL
27526 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27528 commit c7144373427a178332bf9754131c8c34c52c200a
27529 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27530 Date: Tue Nov 27 09:44:53 2007 +0100
27532 sh: Add sh3 and sh4 support in MAKEALL
27534 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27535 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27537 commit 130080874a3d28450098481a262c5f7c855e908d
27538 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27539 Date: Sun Nov 25 02:51:17 2007 +0900
27541 sh: Add document for SuperH.
27543 This document is a summary of information concerning SuperH of U-Boot.
27545 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27547 commit 33ecdc2f9d64926e1a6067b28f3a0aefc3b6d23d
27548 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27549 Date: Sun Nov 25 02:39:31 2007 +0900
27551 sh: Add marubun's pcmcia driver
27553 Marubun pcmcia is a chip for PCMCIA used with SuperH.
27554 Of course, this can be used even by other architectures.
27555 When use this driver, came to be able to use CompactFlash
27558 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27560 commit febd86b969b975289ed948f1ac0eb9722da41ced
27561 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27562 Date: Sun Nov 25 02:32:13 2007 +0900
27564 sh: Update SuperH SCIF driver
27566 - Changed volatile unsigned to vu_.
27567 - Changed Makefile for kconfig.
27569 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
27571 commit 8be760903645af09871be50ad0a6f9ebb62b311d
27572 Author: Stefan Roese <sr@denx.de>
27573 Date: Tue Nov 27 11:57:35 2007 +0100
27575 ppc4xx: Kilauea & Makalu: Fix ext IRQ pin multiplexing
27577 After an error in the AMCC 405EX users manual now correctly configure
27578 IRQ2 (Kilauea)/IRQ0 (Makalu) as alternate 2 signal for external IRQ
27581 Signed-off-by: Stefan Roese <sr@denx.de>
27583 commit a5f601fd1b1278deae5aa9fc27a232b0d1c1c788
27584 Author: Wolfgang Denk <wd@denx.de>
27585 Date: Mon Nov 26 19:18:21 2007 +0100
27587 Cleanup coding style; update CHANGELOG
27589 Signed-off-by: Wolfgang Denk <wd@denx.de>
27591 commit 3deca9d44767efd1b83f4b701f0dbf21a7595f7b
27592 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27593 Date: Sun Nov 25 22:39:25 2007 +0100
27595 MAKEALL: add missing 512x boards in ppc
27597 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27599 commit a340c325e668ca7386c2276387681720be9c3757
27600 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27601 Date: Sun Nov 25 18:45:47 2007 +0100
27603 Makefile : fix tags ctags etags with new drivers organization
27605 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27607 commit 63362cfc6baa97ae0e37ba2c6ece530fcac9f79e
27608 Author: Stefan Roese <sr@denx.de>
27609 Date: Mon Nov 26 15:06:14 2007 +0100
27611 ppc4xx: Makalu: Change EBC setup for CS0 to enable 400MHz usage
27613 As suggested by Senao, use a different EBC_PB0AP setup for 400MHz
27616 Signed-off-by: Stefan Roese <sr@denx.de>
27618 commit ca1ce226287270bb01e25b8e3674c701f12edf19
27619 Author: Stefan Roese <sr@denx.de>
27620 Date: Mon Nov 26 15:01:45 2007 +0100
27622 ppc4xx: Kilauea: Configure pin mux to use ext IRQ2 as interrupt
27624 Signed-off-by: Stefan Roese <sr@denx.de>
27626 commit 87ddedd6ad804427ce125ceaa076d7a4f74e9d5d
27627 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27628 Date: Sun Nov 25 18:45:47 2007 +0100
27630 Makefile : fix tags ctags etags with new drivers organization
27632 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27634 commit 59829cc189378c142c13d2aa8d9a897d8bef3961
27635 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27636 Date: Sat Nov 24 21:26:56 2007 +0100
27638 drivers/mtd : move mtd drivers to drivers/mtd
27640 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27642 commit 318c0b90431f2648552e5ade78833f42652ce859
27643 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27644 Date: Sat Nov 24 21:17:55 2007 +0100
27646 drivers/misc : move misc drivers to drivers/misc
27648 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27650 commit 33daf5b7858807cb4ce4158c2c56524671c14c08
27651 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27652 Date: Sat Nov 24 21:13:59 2007 +0100
27654 drivers/block : move block drivers to drivers/block
27656 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27658 commit 0c698dcaa70275eb8814f665b545547cee013892
27659 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27660 Date: Sat Nov 24 20:59:50 2007 +0100
27662 drivers/rtc : move rtc drivers to drivers/rtc
27664 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27666 commit f868cc5a50757d94f36c312395481cb0f187d9e6
27667 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27668 Date: Sat Nov 24 20:14:44 2007 +0100
27670 drivers/hwmon : move hardware monitor drviers to drivers/hwmon
27672 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27674 commit 16b195c82a18cbfd164800f17a1ef9db2e48331a
27675 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27676 Date: Sat Nov 24 19:46:45 2007 +0100
27678 drivers/input : move input drivers to drivers/input
27680 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27682 commit e4558666293364fc3af1c1d9381ca933fa0f1275
27683 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27684 Date: Sat Nov 24 19:40:11 2007 +0100
27686 drivers/usb : move usb drivers to drivers/usb
27688 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27690 commit 1378df792a7ff3abd1bf54a63f5475784f5b083c
27691 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27692 Date: Sat Nov 24 19:33:38 2007 +0100
27694 drivers/serial : move serial drivers to drivers/serial
27696 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27698 commit 2439e4bfa111babf4bc07ba20efbf3e36036813e
27699 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27700 Date: Wed Nov 21 21:19:24 2007 +0100
27702 drivers/net : move net drivers to drivers/net
27704 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27706 commit 352d259130b349fe9593b8dada641bd78a9659e5
27707 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27708 Date: Tue Nov 20 20:41:48 2007 +0100
27710 drivers/video : move video drivers to drivers/video
27712 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27714 commit 73646217186aa17afc8e305c5f06f06dd335eaad
27715 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27716 Date: Tue Nov 20 20:33:09 2007 +0100
27718 drivers/pcmcia : move pcmcia drivers to drivers/pcmcia
27720 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27722 commit 93a686ee9c5ddc6fa368c32cfbfde6f6724599fc
27723 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27724 Date: Tue Nov 20 20:28:09 2007 +0100
27726 drivers/pci : move pci drivers to drivers/pci
27728 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27730 commit 9162352817579840d7802da6d85872b3ca003c97
27731 Author: Gerald Van Baren <vanbaren@cideas.com>
27732 Date: Thu Nov 22 17:23:23 2007 -0500
27734 Fix fdt printing for updated libfdt
27736 Also improve printing (adopt dtc v1 "c style" hex format), whitespace cleanup.
27738 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
27740 commit 9eb77cea1fa12d5969eb26a1d1d81da381bd6b1c
27741 Author: Kumar Gala <galak@kernel.crashing.org>
27742 Date: Wed Nov 21 13:30:15 2007 -0600
27744 Add additional fdt fixup helper functions
27746 Added the following fdt fixup helpers:
27747 * do_fixup_by_prop{_u32} - Find matching nodes by property name/value
27748 * do_fixup_by_compat{_u32} - Find matching nodes by compat
27750 The _u32 variants work the same only the property they are setting
27751 is know to be a 32-bit integer instead of a byte buffer.
27753 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27755 commit ab544633abdd14f4dd5d92e500b73eb59ef57e67
27756 Author: Kumar Gala <galak@kernel.crashing.org>
27757 Date: Wed Nov 21 11:11:03 2007 -0600
27759 Add fdt_fixup_ethernet helper to set mac addresses
27761 Added a fixup helper that uses aliases to set mac addresses
27762 in the device tree based on the bd_t
27764 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27766 commit dbaf07ce620aab249e3502b20a986234a6af1d3a
27767 Author: Kumar Gala <galak@kernel.crashing.org>
27768 Date: Wed Nov 21 14:07:46 2007 -0600
27770 Fix warnings from import of libfdt
27772 cmd_fdt.c: In function fdt_print:
27773 cmd_fdt.c:586: warning: assignment discards qualifiers from pointer target type
27774 cmd_fdt.c:613: warning: assignment discards qualifiers from pointer target type
27775 cmd_fdt.c:635: warning: assignment discards qualifiers from pointer target type
27776 cmd_fdt.c:636: warning: assignment discards qualifiers from pointer target type
27778 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27780 commit 8d04f02f6224e6983f4812ea4da704950ec8539c
27781 Author: Kumar Gala <galak@kernel.crashing.org>
27782 Date: Wed Oct 24 11:04:22 2007 -0500
27784 Update libfdt from device tree compiler (dtc)
27786 Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from
27787 the device tree compiler (dtc) project.
27789 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27791 commit e93becf80d732b64aef81b23e8b6ece02c40533d
27792 Author: Kumar Gala <galak@kernel.crashing.org>
27793 Date: Sat Nov 3 19:46:28 2007 -0500
27795 Move do_fixup* for libfdt into common code
27797 Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
27798 into common/fdt_support.c and renamed:
27800 do_fixup() -> do_fixup_by_path()
27801 do_fixup_u32() -> do_fixup_by_path_u32()
27803 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27805 commit f738b4a75998f42a7408defadc9baac7a31c92db
27806 Author: Kumar Gala <galak@kernel.crashing.org>
27807 Date: Thu Oct 25 16:15:07 2007 -0500
27809 Make no options to fdt print default to '/'
27811 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27813 commit a3c2933e02503fe36ade2c1b65af46f2b7a168e7
27814 Author: Kumar Gala <galak@kernel.crashing.org>
27815 Date: Wed Oct 24 10:21:57 2007 -0500
27817 Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdt
27820 fdt_node_is_compatible
27821 fdt_find_node_by_type
27822 fdt_find_compatible_node
27824 To ease merge of newer libfdt as we aren't using them anywhere at this time.
27826 Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same
27829 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27831 commit 98e2867cc85409b919f862e6c16026461ec955df
27832 Author: Grant Likely <grant.likely@secretlab.ca>
27833 Date: Wed Nov 21 09:19:37 2007 -0700
27835 [BUILD] Remove libraries when updating autoconf.mk
27837 Fix library problems caused by conditional compilation. Using
27838 autoconf.mk to decide which files to compile has caused a problem when
27839 changing configuration from one board to another without clearing out
27840 the library (*.a) files.
27842 It used to be that the linker was always passed the same list of .o
27843 files when building the .a files. However, that is not longer true
27844 with conditional compilation. Now, a different board config will have
27845 a different file list passed to the linker. The problem occurs when
27846 a library has already been built and the board config is changed.
27848 Since the linker will update instead of replace a preexisting library,
27849 then if the file list changes to remove some object files the old
27850 objects will still exist in the library.
27852 The solution is to remove all old library files when autoconf.mk is
27855 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
27857 commit ed1353d74b9ce8a7fcd660570b848a184d614b5f
27858 Author: Kumar Gala <galak@kernel.crashing.org>
27859 Date: Wed Nov 21 08:49:50 2007 -0600
27861 [BUILD] conditionally compile libfdt/*.c in libfdt/Makefile
27863 Modify libfdt/Makefile to conditionally compile the *.c files based
27864 on the board config.
27866 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
27868 commit 4a43719a7738712811d822ca8125427b27a55cdc
27869 Author: Grant Likely <grant.likely@secretlab.ca>
27870 Date: Mon Sep 24 09:05:31 2007 -0600
27872 [BUILD] conditionally compile common/cmd_*.c in common/Makefile
27874 Modify common/Makefile to conditionally compile the cmd_*.c files based
27875 on the board config.
27877 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
27879 commit 2f155f6c0a1f5e9a306a3f1f4fbe067db7ced3b1
27880 Author: Grant Likely <grant.likely@secretlab.ca>
27881 Date: Mon Sep 24 09:05:31 2007 -0600
27883 [BUILD] Generate include/autoconf.mk from board config files
27885 Use cpp and sed to postprocess config.h and import the defined values
27886 into include/autoconf.mk. autoconf.mk is then included by config.mk to
27887 give 'make' access to the board configuration.
27889 Doing this enables conditional compilation at the Makefile level instead
27890 of by wrapping every .c file with #ifdef/#endif wrappers.
27892 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
27894 commit 68b88999da87ab88e71e1306192905be3450198e
27895 Author: Jon Loeliger <jdl@freescale.com>
27896 Date: Tue Nov 20 15:02:26 2007 -0600
27898 8610HPCD: Enable the 8610 Display Interface Unit
27900 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27902 commit 74f89faa9d1e77ed947e628d3effaa513fe05d05
27903 Author: Jon Loeliger <jdl@freescale.com>
27904 Date: Tue Nov 20 15:00:53 2007 -0600
27906 Move 8610 DIU interface structure definitions to header file.
27908 These two structures are still needed during the
27909 initialization and setup of the DIU hardware.
27910 So move them to the fsl_diu_fb.h file for now.
27913 Noticed-by: York Sun <yorksun@freescale.com>
27914 Signed-off-by: Jon Loeliger <jdl@freescale.com>
27916 commit 080c646dbf474a109c3f85718fb01ce042a38c45
27917 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27918 Date: Tue Nov 20 20:14:18 2007 +0100
27920 drivers/i2c : move i2c drivers to drivers/i2c
27922 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27924 commit 9a337ddc154a10a26f117fd147b009abcdeba75a
27925 Author: Wolfgang Denk <wd@denx.de>
27926 Date: Mon Nov 19 22:20:24 2007 +0100
27928 Prepare for 1.3.0 release.
27930 Signed-off-by: Wolfgang Denk <wd@denx.de>
27932 commit f30ad49b16bf998b03c1a5228b6c86369d61c258
27933 Author: Haiying Wang <Haiying.Wang@freescale.com>
27934 Date: Mon Nov 19 10:02:13 2007 -0500
27936 Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDS
27938 CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it.
27940 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
27942 commit f8c320609366176b31104d9bf5e295232e1c7f1d
27943 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
27944 Date: Mon Nov 19 11:14:16 2007 +0900
27946 [MIPS] board/gth2/lowlevel_init.S: Fix a build warning
27948 lowlevel_init.S: Assembler messages:
27949 lowlevel_init.S:413: Warning: Pretending global symbol used as branch target is local.
27951 Looking at codes, the `memtest' and `clearmem' are intentional mixed
27952 use of `global symbols' and `label' for debugging purpose. To make it
27953 build, just disable global-symbols-use for now. As a result `memtest'
27954 still remains as unused, but leave it be...
27956 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
27958 commit e8da58f2bc092891e8cc92b927ed5c4bd0cb0cab
27959 Author: Wolfgang Denk <wd@denx.de>
27960 Date: Mon Nov 19 12:59:14 2007 +0100
27962 Fix build problems with mp2usb board
27964 Signed-off-by: Wolfgang Denk <wd@denx.de>
27966 commit 6bf4c686afca1e86e1c384d59218f914605713bf
27967 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27968 Date: Sun Nov 18 18:36:11 2007 +0100
27970 s3c24x0: Fix usb_ohci.c missing in Makefile
27971 and usb_ohci.c warning differ in signedness
27973 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27975 commit 6073f61e078da5ddb521b56256bcc36508589883
27976 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27977 Date: Sun Nov 18 12:55:02 2007 +0100
27979 pb1x00 board: Fix u16 status declaration when PCMCIA is defined
27981 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
27983 commit 8412d814ce8bf5570a2b747f1e7fd321097fe987
27984 Author: Wolfgang Denk <wd@denx.de>
27985 Date: Sun Nov 18 17:11:09 2007 +0100
27987 Fix compiler warnings for ARM systems.
27989 Signed-off-by: Wolfgang Denk <wd@denx.de>
27991 commit 409ecdc0bb47dd28b0af6c25ffd658d22cc36b37
27992 Author: Wolfgang Denk <wd@denx.de>
27993 Date: Sun Nov 18 16:36:27 2007 +0100
27995 Fix compiler warnings for PPC systems. Update CHANGELOG.
27997 Signed-off-by: Wolfgang Denk <wd@denx.de>
27999 commit 653811a3c2b35856bf12e196dcc8c4694e28e420
28000 Author: Stefan Roese <sr@denx.de>
28001 Date: Sun Nov 18 14:44:44 2007 +0100
28003 ppc4xx: Correct 405EX PCIe UTL register mapping
28005 Map 4k mem space for UTL registers for each port.
28007 Signed-off-by: Stefan Roese <sr@denx.de>
28009 commit 079c2c4fa71c0d1ebef394508df9088df8a308d3
28010 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28011 Date: Sat Nov 17 11:31:10 2007 +0100
28013 Fix warning differ in signedness in net/net.c and net/nfs.c
28015 commit 7e14fc65368cbd2861b1207453da55a4fc7b3f81
28016 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28017 Date: Sat Nov 17 20:42:45 2007 +0900
28019 gth2.c: Fix a warning on gth2 build.
28021 gth2.c: In function 'misc_init_r':
28022 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
28024 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28026 commit 2309c130aa4c84b91bd874a41269c923eb61b555
28027 Author: Stefan Roese <sr@denx.de>
28028 Date: Sat Nov 17 07:58:25 2007 +0100
28030 Fix warning differ in signedness in common/cmd_scsi.c
28032 Signed-off-by: Stefan Roese <sr@denx.de>
28034 commit 9ea61b57968554eaf0f474ec7e088b17d367f474
28035 Author: Stefan Roese <sr@denx.de>
28036 Date: Sat Nov 17 14:52:29 2007 +0100
28038 ppc4xx: Update AMCC Kilauea config file
28040 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
28042 Signed-off-by: Stefan Roese <sr@denx.de>
28044 commit 7e1d884b7cb602007329c517ec1c453e3a6a5d9c
28045 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28046 Date: Sat Nov 17 20:05:26 2007 +0900
28048 [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker
28050 Current trick to pick up GNU assembler minor version does not work with the
28051 latest binutils (2007-03-01 or later) due to ${PKGVERSION} now default to
28054 $ sde-as --version |grep "GNU assembler"
28055 GNU assembler 2.15.94 mipssde-6.02.02-20050602
28056 $ sde-as --version |grep "GNU assembler" |awk '{print $3}'
28058 $ sde-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
28062 $ mips-linux-as --version |grep "GNU assembler"
28063 GNU assembler (GNU Binutils) 2.18
28064 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}'
28066 $ mips-linux-as --version |grep "GNU assembler" |awk '{print $3}' |awk -F. '{print $2}'
28070 As a result of above, you'll see many noises with such binutils:
28073 /bin/sh: line 0: [: : integer expression expected
28074 /bin/sh: line 0: [: : integer expression expected
28075 make[1]: Entering directory `/home/skuribay/devel/u-boot.git/cpu/mips'
28076 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o incaip_wdt.o incaip_wdt.S
28077 /bin/sh: line 0: [: : integer expression expected
28078 mips-linux-gcc -D__ASSEMBLY__ -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -c -o cache.o cache.S
28079 /bin/sh: line 0: [: : integer expression expected
28080 mips-linux-gcc -g -Os -D__KERNEL__ -DTEXT_BASE=0xB0000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isystem /home/skuribay/devel/buildroot/build_mips/staging_dir/usr/bin/../lib/gcc/mips-linux-uclibc/4.2.1/include -pipe -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4kc -EB -Wall -Wstrict-prototypes -c -o asc_serial.o asc_serial.c
28081 /bin/sh: line 0: [: : integer expression expected
28083 This patch simplifies the trick and makes it work with both versions of gas.
28084 I also replace an expensive `awk (or gawk)' with `cut'.
28086 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28088 commit 16664f72850846e645616da1c0fa5afcd6d15f15
28089 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28090 Date: Sat Nov 17 20:05:26 2007 +0900
28092 [MIPS] Remove useless instructions for initializing $gp.
28094 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28096 commit 03c031d5660ea946c39af6e2e16267da857c609f
28097 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28098 Date: Sat Oct 27 15:27:06 2007 +0900
28100 [MIPS] MIPS 4K core: Coding style cleanups
28102 No logical changes.
28104 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28106 commit f5e429d3860bba4c6ae8bead8f78349fa24491b2
28107 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28108 Date: Sat Nov 17 20:05:20 2007 +0900
28110 [MIPS] gth2.c: Fix a warning on gth2 build.
28112 gth2.c: In function 'misc_init_r':
28113 gth2.c:434: warning: pointer targets in passing argument 2 of 'setenv' differ in signedness
28115 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28117 commit 4fbd0741b2b6441da10be93e10267122581b7079
28118 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28119 Date: Sat Oct 27 15:22:33 2007 +0900
28121 [MIPS] au1x00_eth.c: Fixed a warning on pb1000 build.
28123 au1x00_eth.c: In function 'au1x00_miiphy_write':
28124 au1x00_eth.c:139: warning: 'return' with no value, in function returning non-void
28126 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28128 commit f01320459736f156707425cf8112f98606301aa4
28129 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28130 Date: Sat Oct 27 15:00:25 2007 +0900
28132 [MIPS] au1x00_eth.c: Fix au1x00_miiphy_{read,write} build error
28134 au1x00_eth.c: In function 'au1x00_enet_initialize':
28135 au1x00_eth.c:246: error: 'au1x00_miiphy_read' undeclared (first use in this function)
28136 au1x00_eth.c:246: error: (Each undeclared identifier is reported only once
28137 au1x00_eth.c:246: error: for each function it appears in.)
28138 au1x00_eth.c:246: error: 'au1x00_miiphy_write' undeclared (first use in this function)
28139 au1x00_eth.c: In function 'au1x00_miiphy_write':
28140 au1x00_eth.c:298: warning: 'return' with no value, in function returning non-void
28141 make[1]: *** [au1x00_eth.o] Error 1
28143 Fixed by moving these two functions forward.
28145 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28147 commit b09258c5393edd1087c5f39ae68338f16b49f8b3
28148 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28149 Date: Sat Oct 27 15:00:25 2007 +0900
28151 MAKEALL: Added missing pb1000 board
28153 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28155 commit 2e4a6e3667a1e39c0e6e99498686b15d2718b369
28156 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28157 Date: Sat Oct 27 15:00:24 2007 +0900
28159 [MIPS] pb1000: Replace obsolete memsetup.S with lowlevel_init.S
28161 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28163 commit 662e5cb397249c3ea88a4c3255e9ccfc40b98d82
28164 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28165 Date: Sat Oct 27 15:00:24 2007 +0900
28167 [MIPS] u-boot.lds: Cleanup __u_boot_cmd_{start,end}
28169 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28171 commit 5947f6999aafa7c54c1390983d264a8463dfea8e
28172 Author: Wolfgang Denk <wd@denx.de>
28173 Date: Sat Nov 17 02:34:38 2007 +0100
28175 Update CHANGELOIG, prepare for -rc4
28177 Signed-off-by: Wolfgang Denk <wd@denx.de>
28179 commit fd329e6f05bbdfe6bd71b0e09f0c76d3b0a025a5
28180 Author: Luotao Fu <l.fu@pengutronix.de>
28181 Date: Wed Nov 14 18:58:33 2007 +0100
28183 Fix the i2c frequency and default address in rsdproto board
28185 rsdproto board support has wrong I2C frequency and wrong return value
28188 Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
28190 commit 429c180edad038f91c989cb14b478228092e7054
28191 Author: Wolfgang Denk <wd@denx.de>
28192 Date: Sat Nov 17 01:45:38 2007 +0100
28194 powerpc: Backout relocation changes for MPC5121, too.
28196 Apply Grant Likely's backout to MPC5121 code, too.
28198 Pointed out by Rafal Jaworowski <raj@semihalf.com>
28200 Signed-off-by: Wolfgang Denk <wd@denx.de>
28202 commit 1c3dd43338a077165e7e0309cb3994e65d2bdbf8
28203 Author: Grant Likely <grant.likely@secretlab.ca>
28204 Date: Tue Nov 13 22:18:33 2007 -0700
28206 powerpc: Backout relocation changes.
28208 Ugh. I *hate* to back this change out, but these compiler flags don't
28209 work for relocation on all versions of GCC. I've not been able to
28210 reproduce the environment in my setup (and hence, not been able to
28211 find a combination that *does* work), so I've got no choice but to go
28212 back to the old gcc flags and linker script.
28214 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28216 commit 5c15010efad980ad5498cc565fc1ed70df2f52b4
28217 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28218 Date: Tue Nov 13 09:11:05 2007 +0100
28220 Fixed mips_io_port_base build errors.
28222 This patch has been sent on:
28225 Although mips_io_port_base is currently a part of IDE command, it is quite
28226 fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
28227 it to MIPS general part, and introduce `set_io_port_base()' from Linux.
28229 This patch is triggered by multiple definition of `mips_io_port_base' build
28230 error on gth2 (and tb0229 also needs this fix.)
28232 board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
28233 /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
28234 common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
28235 make: *** [u-boot] Error 1
28237 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28238 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28240 commit 6ecbb7a3fa9b0940ed33e490d195d4b6830b2422
28241 Author: Wolfgang Denk <wd@denx.de>
28242 Date: Sat Nov 17 01:30:40 2007 +0100
28244 Fix a bug in the slave serial programming mode for the Xilinx
28245 Spartan2/3 FPGAs. The old code used "< 0" on a "char" type to test if
28246 the most significant bit was set, which did not work on any
28247 architecture where "char" defaulted to be an unsigned type.
28249 Based on a patch by Angelos Manousaridis <amanous@inaccessnetworks.com>
28251 Signed-off-by: Wolfgang Denk <wd@denx.de>
28253 commit d08b7233bc252faad8339e7ca0ddfd62fa79903c
28254 Author: Jon Loeliger <jdl@freescale.com>
28255 Date: Thu Nov 1 12:23:29 2007 -0500
28257 86xx: Fix broken variable reference when #def DEBUGing.
28259 Sometimes you can't reference the DDR2 controller variables.
28261 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28263 commit f9d9164d9c6b5a7f0393fd8d7e246b8a0326bc19
28264 Author: Jason Jin <Jason.jin@freescale.com>
28265 Date: Fri Oct 26 18:32:00 2007 +0800
28267 make 8610 board use pixis reset
28269 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28271 commit db74b3c1c9481a6bffbf8cd445e5bcbf6908e836
28272 Author: Jason Jin <Jason.jin@freescale.com>
28273 Date: Mon Oct 29 19:26:21 2007 +0800
28275 Unify pixis_reset altbank across board families
28277 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
28278 into the separate board config files.
28280 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28281 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28283 commit 64bf555465c7926be13e1046ac0d0f05ac72829c
28284 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28285 Date: Wed Nov 7 08:19:21 2007 +0100
28287 Fix warning: pointer targets in assignment differ in signedness
28289 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28291 commit 7a60ee7c6248a958c5757d3660a1702723a2786d
28292 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28293 Date: Wed Nov 7 08:19:19 2007 +0100
28295 Fix warning differ in signedness in common/cmd_ide.c
28297 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28299 commit f31d38b9eea9b32f6a1ac848a298cc71ca4c9a03
28300 Author: Stefan Roese <sr@denx.de>
28301 Date: Fri Nov 16 14:16:54 2007 +0100
28303 ppc4xx: Enable 405EX PCIe UTL register configuration
28305 Till now the UTL registers on 405EX were not initialized but left with
28306 their default values. This patch new initializes some of the UTL
28307 registers on 405EX.
28309 Signed-off-by: Stefan Roese <sr@denx.de>
28311 commit ecdcbd4f8c1f8cefd785752f4e7536aae2a4ecf9
28312 Author: Stefan Roese <sr@denx.de>
28313 Date: Fri Nov 16 14:00:59 2007 +0100
28315 ppc4xx: Update AMCC Makalu for board rev 1.1
28317 This patch adds changes needed for Makalu rev 1.1:
28319 - Enable 2nd DDR2 bank resulting in 256MByte of SDRAM
28320 - Enable 2nd ethernet port EMAC1
28321 - Use generic GPIO configuration framework (CFG_4xx_GPIO_TABLE)
28322 - Reset PCIe ports via GPIO upon bootup
28324 Signed-off-by: Stefan Roese <sr@denx.de>
28326 commit 4d4faae65e115e327425cd514c1a35146a85166b
28327 Author: Grant Likely <grant.likely@secretlab.ca>
28328 Date: Mon Sep 24 09:05:31 2007 -0600
28330 Group PCI and PCMCIA drivers in drivers/Makefile
28332 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28334 commit 5798f87dc10a496d79d3177b9f5a76488987fd35
28335 Author: Grant Likely <grant.likely@secretlab.ca>
28336 Date: Mon Sep 24 09:05:31 2007 -0600
28338 Group block/flash drivers in drivers/Makefile
28340 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28342 commit df58c81551700f058b44cacf55a7997fa63bfe0a
28343 Author: Grant Likely <grant.likely@secretlab.ca>
28344 Date: Mon Sep 24 09:05:31 2007 -0600
28346 Group USB drivers in drivers/Makefile
28348 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28350 commit 5dbb6ed622e539b0c8493ef7e578d3a533181d29
28351 Author: Grant Likely <grant.likely@secretlab.ca>
28352 Date: Mon Sep 24 09:05:30 2007 -0600
28354 Group i2c drivers in drivers/Makefile
28356 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28358 commit ec00c76de0e5971273905998d62d6bb119324218
28359 Author: Grant Likely <grant.likely@secretlab.ca>
28360 Date: Mon Sep 24 09:05:30 2007 -0600
28362 Group console drivers in drivers/Makefile
28364 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28366 commit 754f230aa01b8c789fc31f8013c2487954073300
28367 Author: Grant Likely <grant.likely@secretlab.ca>
28368 Date: Mon Sep 24 09:05:30 2007 -0600
28370 Group network drivers in drivers/Makefile
28372 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28374 commit f0037c56b0d12cd46215124667b9f83d60ef9391
28375 Author: Grant Likely <grant.likely@secretlab.ca>
28376 Date: Mon Sep 24 09:05:30 2007 -0600
28378 Build: split COBJS value into multiple lines
28380 This change is in preparation for condtitionial compile support in the
28381 build system. By spliting them all into seperate lines now, subsequent
28382 patches that change 'COBJS-y += ' into 'COBJS-$(CONFIG_<blah>) += ' will
28383 be less invasive and easier to review
28385 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28387 commit 1b4aaffe4fb2a5e95d9111a5d94fd1f89215dce4
28388 Author: Grant Likely <grant.likely@secretlab.ca>
28389 Date: Mon Sep 24 09:05:30 2007 -0600
28391 Add .gitignore files
28393 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28394 Acked-by: Kim Phillips <kim.phillips@freescale.com>
28396 commit 955413f35f054a82e40042f1dbcf501c6a05719b
28397 Author: Grant Likely <grant.likely@secretlab.ca>
28398 Date: Thu Nov 15 08:27:52 2007 -0700
28400 Revert "Correct relocation fixup for mpc5xx"
28402 This reverts commit 3649cd99ba815b6601868735765602f00ef3692b.
28403 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28405 commit e15633888a058aacb31a62d2cf1278e1e4c236ab
28406 Author: Grant Likely <grant.likely@secretlab.ca>
28407 Date: Thu Nov 15 08:24:32 2007 -0700
28409 Revert "Correct fixup relocation for MPC5xxx"
28411 This reverts commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90.
28412 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28414 commit 139365fbe566d0fc619a1ed04452ec5388f0cef8
28415 Author: Grant Likely <grant.likely@secretlab.ca>
28416 Date: Thu Nov 15 08:21:04 2007 -0700
28418 Revert "Correct fixup relocation for mpc8220"
28420 This reverts commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00.
28421 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28423 commit 70922342369e5e39b286fe21e768a239ca07a514
28424 Author: Grant Likely <grant.likely@secretlab.ca>
28425 Date: Thu Nov 15 08:20:57 2007 -0700
28427 Revert "Correct fixup relocation for mpc824x"
28429 This reverts commit f3a52fe05923935db86985daf9438e2f70ac39aa.
28430 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28432 commit 96279ab4cad60cb5972aa934fbe4845ac02cc75a
28433 Author: Grant Likely <grant.likely@secretlab.ca>
28434 Date: Thu Nov 15 08:20:50 2007 -0700
28436 Revert "Correct fixup relocation for mpc8260"
28438 This reverts commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96.
28439 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28441 commit 928fe33b24cdf382a8dc8687fed24b1961cdb5d6
28442 Author: Grant Likely <grant.likely@secretlab.ca>
28443 Date: Thu Nov 15 08:20:43 2007 -0700
28445 Revert "Correct fixup relocation for mpc83xx"
28447 This reverts commit 057004f4a4863554d56cc56268bfa7c7d9738e27.
28448 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28450 commit c93945e8f9e300860d2bf73a2549ce5794f8bd00
28451 Author: Grant Likely <grant.likely@secretlab.ca>
28452 Date: Thu Nov 15 08:20:25 2007 -0700
28454 Revert "[MPC512x] Correct fixup relocation"
28456 This reverts commit 8d17979d0359492a822a0a409d26e3a3549b4cd4.
28457 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
28459 commit c9672f81f1bdb4e8ddf62aa72ca0206e8b72aa1c
28460 Author: Stefan Roese <sr@denx.de>
28461 Date: Thu Nov 15 14:25:09 2007 +0100
28463 ppc4xx: Small AMCC Kilauea cleanup
28465 Remove not needed pci_target_init() function.
28467 Signed-off-by: Stefan Roese <sr@denx.de>
28469 commit aee747f19b460a0e9da20ff21e90fdaac1cec359
28470 Author: Stefan Roese <sr@denx.de>
28471 Date: Thu Nov 15 14:23:55 2007 +0100
28473 ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
28475 - Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
28476 - Cleanup of the 4xx GPIO functions
28477 - Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
28479 Signed-off-by: Stefan Roese <sr@denx.de>
28481 commit 8ada0ebf38e4073beea0309188b25d82a112a2ae
28482 Author: Stefan Roese <sr@denx.de>
28483 Date: Thu Nov 15 14:20:08 2007 +0100
28485 ppc4xx: AMCC Taihu board config file cleanup
28487 This patch makes the AMCC Taihu a little more compatible to the other
28490 Signed-off-by: Stefan Roese <sr@denx.de>
28492 commit 5e71c51d74c963d3174060c078dcacf13bdd02ef
28493 Author: Marian Balakowicz <m8@semihalf.com>
28494 Date: Thu Nov 15 13:37:28 2007 +0100
28496 [INKA4x0] NG hardware: flash support
28498 Disabled and remove inka4x0 custom flash driver, use CFI flash
28501 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28503 commit 5fb6d7191e206cdde0e23140fd8111caed93a595
28504 Author: Marian Balakowicz <m8@semihalf.com>
28505 Date: Thu Nov 15 13:29:55 2007 +0100
28507 [INKA4x0] NG hardware: SDRAM support
28509 Add support for three new DDR chips that may be present on a NG
28510 INKA4x0 hardware: HYB25D512160BF-5, K4H511638C-7CB3, T46V32M16BN-6IT.
28512 Cleanup board/inka4x0/mt48lc16m16a2-75.h file.
28514 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28516 commit f23cb34c367bb27585a4fdb8a75277370e7d0596
28517 Author: Marian Balakowicz <m8@semihalf.com>
28518 Date: Thu Nov 15 13:24:43 2007 +0100
28520 [INKA4x0] NG hardware: platform code update
28522 - Cleanup compile warnings.
28523 - Add missing '\0' in default environment.
28524 - Increase CFG_MONITOR_LEN to 256 KiB.
28525 - Add required CFG_USE_PPCENV.
28527 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28529 commit 2ae64f5135e51bb18753884d1265b99e89b5aedd
28530 Author: Peter Pearse <peter.pearse@arm.com>
28531 Date: Thu Nov 15 08:58:00 2007 +0000
28533 Remove warnings re CONFIG_EXTRA_ENV_SETTINGS
28534 Remove warnings re onenand_read() & write()
28536 commit 2db916e14410e3ec1738508c7bf4dfeb2b299ae7
28537 Author: Peter Pearse <peter.pearse@arm.com>
28538 Date: Thu Nov 15 08:45:13 2007 +0000
28542 commit 1d8a49eca1c7bdc8db1c47a92f9014a29ead03ae
28543 Author: Roy Zang <tie-fei.zang@freescale.com>
28544 Date: Thu Sep 13 18:52:28 2007 +0800
28546 Enable ULi1575 Ethernet support in 8610HPCD config
28548 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28549 Acked-by: Jon Loeliger <jdl@freescale.com>
28551 commit 54fd6c93c28a0a45352fff5dd92673401ff563f2
28552 Author: Stefan Roese <sr@denx.de>
28553 Date: Tue Nov 13 08:18:20 2007 +0100
28555 ppc4xx: lwmon5: Change PHY reset sequence for PHY MDIO address latching
28557 Signed-off-by: Stefan Roese <sr@denx.de>
28559 commit 7d0a4066b5a6b698e5fc1b66cfe9705774bbce93
28560 Author: Stefan Roese <sr@denx.de>
28561 Date: Tue Nov 13 08:06:11 2007 +0100
28563 ppc4xx: Fix 405EX PCIe UTLSET register setup
28565 Signed-off-by: Stefan Roese <sr@denx.de>
28567 commit 1ce55151c85d068f70317a8d65c61058b891afb4
28568 Author: Heiko Schocher <hs@denx.de>
28569 Date: Tue Nov 13 07:50:29 2007 +0100
28571 [UC101] SRAM now with 2 MB working.
28573 Signed-off-by: Heiko Schocher <hs@denx.de>
28575 commit 2d14684341109a69616e4d6016cd61402d55086f
28576 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28577 Date: Fri Nov 9 15:37:53 2007 +0100
28579 ppc4xx: Use generic usb-ohci driver for sequoia board
28581 This patch makes the sequoia board use the generic usb-ohci driver
28582 instead of cpu/ppc4xx/usb_ohci.c.
28584 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28585 Signed-off-by: Stefan Roese <sr@denx.de>
28587 commit 9be659ac0868dc367caa957c5c725e46b07f6a5f
28588 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28589 Date: Fri Nov 9 15:37:23 2007 +0100
28591 ppc4xx: Make USB working with CONFIG_4xx_DCACHE defined
28593 This patch disables the 44x d-cache on 'usb start' and
28594 reenables it on 'usb stop'. This should be seen as a
28595 temporary fix until the generic usb-ohci driver can
28596 life with d-cache enabled.
28598 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28599 Signed-off-by: Stefan Roese <sr@denx.de>
28601 commit fbde2169d2c48fcc9ff03489534a78ffb0a8a0d4
28602 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28603 Date: Fri Nov 9 15:36:44 2007 +0100
28605 ppc4xx: Remove redundant code from 4xx network driver
28607 This patch removes some redundant code and decrements the end
28608 address of cache flush and invalidate by 1.
28610 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
28611 Signed-off-by: Stefan Roese <sr@denx.de>
28613 commit 5ca9881aad8c413ac2a82868a5e3719178254502
28614 Author: Peter Pearse <peter.pearse@arm.com>
28615 Date: Fri Nov 9 15:24:26 2007 +0000
28617 Add apollon board support
28618 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
28620 commit b53313dbfc74525d85f1e7e0102f902d5c863beb
28621 Author: Stefan Roese <sr@denx.de>
28622 Date: Fri Nov 9 12:19:58 2007 +0100
28624 ppc4xx: Remove In:/Out:/Err: boot output for AMCC Kilauea
28626 Signed-off-by: Stefan Roese <sr@denx.de>
28628 commit c7f69c340277935a6c19a956421852da944a365f
28629 Author: Stefan Roese <sr@denx.de>
28630 Date: Fri Nov 9 12:18:54 2007 +0100
28632 ppc4xx: Make output a little shorter on I2C bootrom detection
28634 Most 4xx PPC capable of using an I2C bootrom for bootstrap setting
28635 already print a line with the information which I2C bootrom is
28636 used for bootstrap configuration. So we don't need this extra line
28637 with "I2C boot EEPROM en-/dis-abled".
28639 This patch also has a little code cleanup integrated.
28641 Signed-off-by: Stefan Roese <sr@denx.de>
28643 commit 8d737a28152ec12873f8544cca1fb39a49e5e693
28644 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28645 Date: Thu Nov 8 12:50:18 2007 -0600
28647 ColdFire: MCF5329 - Remove reset registers from CCM
28649 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28651 commit 7d7cdea769a60b0a6e4c18bef7f9d648fd14b8d7
28652 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28653 Date: Thu Nov 8 12:31:11 2007 -0600
28655 ColdFire: MCF5329 - Add Reset structure to immap_5329.h
28657 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28659 commit 09b26cf00d76d75fdf7fdc4b13e4dd929743bc21
28660 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28661 Date: Thu Nov 8 12:19:01 2007 -0600
28663 ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file mode
28665 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28667 commit 225a24b5e062ad94627424508ae814f51dbe1a34
28668 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28669 Date: Wed Nov 7 18:00:54 2007 -0600
28671 ColdFire: MCF5445x - Update correct RAMBAR and missing linker files
28673 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28675 commit 248c7c14835f34d5d910b45e5600050e58ca6cab
28676 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28677 Date: Wed Nov 7 17:56:15 2007 -0600
28679 ColdFire: MCF532x - Update do_reset() using core reset
28681 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28683 commit d9240a5f827eb3b476a6ba2938d01f1a9e7688f4
28684 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28685 Date: Wed Nov 7 17:51:00 2007 -0600
28687 ColdFire: Update cpu flag for 4.2-xx compiler
28689 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
28691 commit 070ba56115b4da63b46e974287fa4550d4023386
28692 Author: York Sun <yorksun@freescale.com>
28693 Date: Wed Oct 31 14:59:04 2007 -0500
28695 8610: Add console frame buffer support to FSL 8610 DIU driver.
28697 Add cfb console support to FSL 8610 DIU driver.
28698 Inspect board version from PIXIS to obtain correct pixel format.
28700 Use #define CONFIG_VIDEO in config file to enable fb console.
28702 To switch monitor, set monitor variable to
28703 0 - DVI, 1 - Single link LVDS, 2 - Double link LVDS
28704 followed by "diufb init".
28706 Preserve logo bitmap at the top of the fb console.
28708 Signed-off-by: York Sun <yorksun@freescale.com>
28709 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28711 commit a877880c6949e948bd63cd6ea4e216573d2f53dd
28712 Author: York Sun <yorksun@freescale.com>
28713 Date: Mon Oct 29 13:58:39 2007 -0500
28715 8610: Add 8610 DIU display driver
28717 1280x1024 and 1024x768 @ 32 bpp are supported now.
28718 DVI, Single-link LVDS, Double-link LVDS are all supported.
28720 Environmental variable "monitor" is used to specify monitor port.
28722 A new command "diufb" is introduced to reinitialize monitor
28723 and display a BMP file in the memory. So far, 1-bit, 4-bit,
28724 8-bit and 24-bit BMP formats are supported.
28727 - initialize the diu driver
28728 Enable the port specified in the environmental variable "monitor"
28731 - display bmp file in memory.
28732 The bmp image should be no bigger than the resolution, 1280x1024
28733 for DVI and double-link LVDS, 1024x768 for single-link LVDS.
28735 Note, this driver allocate memory but doesn't free it after use
28736 It is written on purpose -- to avoid a failure of reallocation
28737 due to memory fragement.
28739 ECC of DDR is disabled for DIU performance. L2 data cache is also disabled.
28741 Signed-off-by: York Sun <yorksun@freescale.com>
28742 Signed-off-by: Jon loeliger <jdl@freescale.com>
28744 commit 52e5ddfecdda308f75782fae206b677b1810f5f9
28745 Author: York Sun <yorksun@freescale.com>
28746 Date: Wed Oct 31 10:43:59 2007 -0500
28748 FSL: Add a freescale bitmap logo.
28750 This Freescale logo is a 340 x 128 x 4bpp BMP file
28751 that can be displayed by the DIU Framebuffer driver.
28753 Signed-off-by: York Sun <yorksun@freescale.com>
28754 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28756 commit 1815338fbd1c0f94f8276d2891b99caa5a05f622
28757 Author: York Sun <yorksun@freescale.com>
28758 Date: Mon Oct 29 13:57:53 2007 -0500
28760 8610: Make some extra debug environment variables conditional.
28762 One may #define ENV_DEBUG to get them back again.
28764 Signed-off-by: York Sun <yorksun@freescale.com>
28766 commit 761421ccca80a9fb37b19c37aa61d46ef75e0647
28767 Author: Jason Jin <Jason.jin@freescale.com>
28768 Date: Mon Oct 29 19:26:21 2007 +0800
28770 8610: Actually enable pixis_reset CONFIGs
28772 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28774 commit f3bceaab230b4748d0afc4109b6837308f018b40
28775 Author: Jason Jin <Jason.jin@freescale.com>
28776 Date: Fri Oct 26 18:31:59 2007 +0800
28778 Fix the BAT definition of PCI IO on 8610 board
28780 The address in the BAT register is aligned with the BAT size.
28781 The original definition actually did not define BAT for PCIE2 IO.
28782 This patch fix this.
28784 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28786 commit 9f23ca334a6f5f021ef9e9d0fad9da80d63b2d56
28787 Author: Jason Jin <Jason.jin@freescale.com>
28788 Date: Mon Oct 29 19:26:21 2007 +0800
28790 Unify pixis_reset altbank across board families
28792 Basically, refactor the CFG_PIXIS_VBOOT_MASK values
28793 into the separate board config files.
28795 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28796 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28798 commit a8318ec205c8e8794b5f9f1b8584abadb440e8ba
28799 Author: Jason Jin <Jason.jin@freescale.com>
28800 Date: Fri Oct 26 18:32:00 2007 +0800
28802 make 8610 board use pixis reset
28804 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
28806 commit 9c84709eedce9c680dd695984ab7d2328f4f04f5
28807 Author: Jon Loeliger <jdl@freescale.com>
28808 Date: Thu Nov 1 12:23:29 2007 -0500
28810 86xx: Fix broken variable reference when #def DEBUGing.
28812 Sometimes you can't reference the DDR2 controller variables.
28814 Signed-off-by: Jon Loeliger <jdl@freescale.com>
28816 commit 1f103105a3746ab12279b63b8c1d372c0ce2cc58
28817 Author: Roy Zang <tie-fei.zang@freescale.com>
28818 Date: Mon Nov 5 17:39:24 2007 +0800
28820 Implement general ULi 526x Ethernet driver support in U-boot
28822 This patch implements general ULi 526x Ethernet driver.
28823 Until now, it is the only native Ethernet port on
28824 MPC8610HPCD board, but it could be used on other boards
28825 with ULi 526x Ethernet port as well.
28827 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
28828 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28829 Acked-by: Jon Loeliger <jdl@freescale.com>
28830 Signed-off-by: Ben Warren <bwarren@qstreams.com>
28832 commit 71bc6e6474fea8ef481b9b45d1edd7ad1f6dfbbd
28833 Author: Larry Johnson <lrj@arlinx.com>
28834 Date: Thu Nov 1 08:46:50 2007 -0500
28836 NET: Add Ethernet 1000BASE-X support for PPC4xx
28838 This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and
28839 "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which
28840 returns non-zero iff the PHY registers are configured for 1000BASE-X. The
28841 "mii info" command is modified to distinguish between 1000BASE-T and -X.
28843 Signed-off-by: Larry Johnson <lrj@acm.org>
28844 Signed-off-by: Ben Warren <bwarren@qstreams.com>
28846 commit 298035df4948b113d29ac0e694717d34b95bc5dc
28847 Author: Larry Johnson <lrj@arlinx.com>
28848 Date: Wed Oct 31 11:21:29 2007 -0500
28850 NET: Cosmetic changes
28852 Signed-off-by: Larry Johnson <lrj@acm.org>
28853 Signed-off-by: Ben Warren <bwarren@qstreams.com>
28855 commit 654f38b3a387886996a5a75771fbfc29cb4f225e
28856 Author: Stefan Roese <sr@denx.de>
28857 Date: Mon Nov 5 07:43:05 2007 +0100
28859 ppc4xx: Make output a little shorter on PCIe detection
28861 Now not max 3 lines but 2 lines are printed per PCIe port.
28863 Signed-off-by: Stefan Roese <sr@denx.de>
28865 commit 992742a5b09d9040adbd156fb90756af66ade310
28866 Author: Wolfgang Denk <wd@denx.de>
28867 Date: Sat Nov 3 23:09:27 2007 +0100
28869 Cleanup coding style; update CHANGELOG
28871 Signed-off-by: Wolfgang Denk <wd@denx.de>
28873 commit e881cb563e32f45832b7b6db77bdcd017adcbb41
28874 Author: Bruce Adler <bruce.adler@ccpu.com>
28875 Date: Fri Nov 2 13:15:42 2007 -0700
28877 fix wording in README
28879 Changed the wording to properly describe the shadowing
28880 of the environment from ROM to RAM
28882 Signed-off-by: Bruce Adler <bruce.adler@acm.org>
28884 commit ad845beef06245426c57b53dcdc01b7dc70e0d45
28885 Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28886 Date: Wed Oct 31 02:18:15 2007 +0900
28888 blackfin: Move `-D__BLACKFIN__' to $(ARCH)_config.mk
28890 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
28892 commit ec22755799466c8a103664bb3a5e647bf9c238f4
28893 Author: Vlad Lungu <vlad@comsys.ro>
28894 Date: Thu Oct 25 16:08:14 2007 +0300
28896 Trimmed some variables in ne2000.c
28898 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
28900 commit eb6f214d3644b2a77968c176ed36dcf858cfe7e0
28901 Author: Zhang Wei <wei.zhang@freescale.com>
28902 Date: Thu Oct 25 17:51:27 2007 +0800
28904 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
28906 The scan code of the key 'z' is 0x1d, which should be handled.
28908 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
28911 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28913 commit bbf4796f6498fbade56d56eff3a0a49b299d93e5
28914 Author: Zhang Wei <wei.zhang@freescale.com>
28915 Date: Thu Oct 25 17:30:04 2007 +0800
28917 Fix USB support issue for MPC8641HPCN board.
28919 The configuration file has already enabled USB, but it
28920 missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB
28921 on MPC8641HPCN can not work because of the wrong USB
28924 And add the USB command to U-Boot commands list.
28926 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
28928 commit 4e62041023dc3de9d98d977bb080235bc6d035e0
28929 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28930 Date: Wed Oct 24 18:16:01 2007 +0200
28932 Use config_cmd_default.h instead of config_cmd_all.h
28934 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
28936 commit 56622f87857439b1c221e9deef11a9d5bb5d4308
28937 Author: Marian Balakowicz <m8@semihalf.com>
28938 Date: Wed Oct 24 01:37:36 2007 +0200
28940 TQM5200: Call usb_cpu_init() during board init
28942 usb_cpu_init() configures GPS USB pins, clocks, etc. and
28943 is required for proper operation of kernel USB subsystem.
28944 This setup was previously done in the kernel by the fixup
28945 code which is being removed, thus low level init must be
28946 done by U-boot now.
28948 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
28950 commit 29c29c0267fe857e72014ce90c5d35b2ef6302bd
28951 Author: Guennadi Liakhovetski <lg@denx.de>
28952 Date: Tue Oct 23 16:25:50 2007 +0200
28956 An obvious typo. Originally fixed in linkstation u-boot port.
28958 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28960 commit 59543fe00a4ce720ef9f5aa7fb387c6daf1c7d78
28961 Author: Guennadi Liakhovetski <lg@denx.de>
28962 Date: Tue Oct 23 14:35:05 2007 +0200
28964 Fix a typo in cpu/mpc824x/interrupts.c
28966 Since December 2003 the timer_interrupt_cpu() function in
28967 cpu/mpc824x/interrupts.c contains what seems to be a superfluous
28968 parameter. Remove it.
28970 Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
28972 commit c9e7b9b9a1700fe009678d1f9b41e6364ac5df2d
28973 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
28974 Date: Wed Oct 17 11:13:51 2007 +0200
28976 add ft_cpu_setup(..) on mpc8260
28978 Add ft_cpu_setup(..)-function to adapt it for use with libfdt
28979 based on code from mpc5xxx
28981 Sigend-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
28984 commit 6abd82e19ae93c0b4d104e50165e235915ec0875
28985 Author: Sergej Stepanov <Sergej.Stepanov@ids.de>
28986 Date: Wed Oct 17 11:18:42 2007 +0200
28988 changes for IDS8247 board support
28990 To get the IDS8247 board working following are done:
28991 - FCC2 is deactivated
28992 - FCC1 is activated
28994 - CFI driver is activated
28995 - Adapted for use with LIBFDT
28997 Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de>
29000 commit 3d6cb3b24add6415f86a0f013ea40f5639b90047
29001 Author: Stefan Roese <sr@denx.de>
29002 Date: Sat Nov 3 12:08:28 2007 +0100
29004 ppc4xx: Add AMCC Kilauea/Haleakala NAND booting support
29006 This patch adds NAND booting support for the AMCC 405EX(r) eval boards.
29007 Again, only one image supports both targets.
29009 Signed-off-by: Stefan Roese <sr@denx.de>
29011 commit 8b6684a698500be9c142ec2c9f46cfc348e17f0c
29012 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
29013 Date: Wed Oct 24 15:48:37 2007 +0200
29015 ATSTK1002: Remove default ethernet addresses
29017 Wolfgang is right: It's not a good idea to set up default initial
29018 ethernet addresses for a board, even though they belong to the local
29021 This will change the failure mode from "IT manager screams at you for
29022 using duplicate ethernet addresses" to a nice error message explaining
29023 that the ethernet address hasn't been set properly.
29025 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
29027 commit e5c794e491a57d829b6d8733e2ed8368a2269abf
29028 Author: Justin Flammia <jflammia@savantav.com>
29029 Date: Mon Oct 29 17:40:35 2007 -0400
29033 This is a multi-part message in MIME format.
29035 commit e6e505eae94ed721e123e177489291fc4544b7b8
29036 Author: Justin Flammia <jflammia@savantav.com>
29037 Date: Mon Oct 29 17:19:03 2007 -0400
29039 Found a bug in the way the DHCP Request packet is built, where the IP address
29040 that is offered by the server is bound to prematurely. This patch is a fix of
29041 that bug where the IP address offered by the DHCP server is not used until
29042 after the DHCP ACK from the server is received.
29044 Signed-off-by: Justin Flammia <jflammia@savantav.com>
29045 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29047 commit 5d96d40d3f36da33348e68f9ea993f383e11f997
29048 Author: Stefan Roese <sr@denx.de>
29049 Date: Wed Oct 31 20:58:34 2007 +0100
29051 ppc4xx: Fix acadia_nand build problem
29053 Since the cache handling functions were moved from start.S into cache.S
29054 the acadia NAND booting Makfile needs to be adapted accordingly.
29056 Signed-off-by: Stefan Roese <sr@denx.de>
29058 commit ea2e142843533ca593fcb5cb3e1daf1b7f5e5949
29059 Author: Stefan Roese <sr@denx.de>
29060 Date: Wed Oct 31 20:57:11 2007 +0100
29062 ppc4xx: Add CONFIG_4xx_DCACHE compile options to enable cached SDRAM
29064 This patch adds the CONFIG_4xx_DCACHE options to some SDRAM init files
29065 and to the Sequoia TLB init code. Now the cache can be enabled on 44x
29066 boards by defining CONFIG_4xx_DCACHE in the board config file. This
29067 option will disappear, when more boards use is successfully and no
29068 more known problems exist.
29070 This is tested successfully on Sequoia and Katmai. The only problem that
29071 needs to be fixed is, that USB is not working on Sequoia right now, since
29072 it will need some cache handling code too, similar to the 4xx EMAC driver.
29074 Signed-off-by: Stefan Roese <sr@denx.de>
29076 commit 3db93b8bedd32e914b38976141b3fdf4ea3ff738
29077 Author: Stefan Roese <sr@denx.de>
29078 Date: Wed Oct 31 20:51:10 2007 +0100
29080 ppc4xx: Enable CPU POST test for 4xx with dcache enabled
29082 Now with caches enabled (i- and d-cache) on 44x, we need a chance to
29083 disable the cache for the CPU POST tests, since these tests consist
29084 of self modifying code. This is done via the new change_tlb() function.
29086 Signed-off-by: Stefan Roese <sr@denx.de>
29088 commit f71b2888b4b3c870909a0341427b2a914246f81f
29089 Author: Stefan Roese <sr@denx.de>
29090 Date: Wed Oct 31 20:47:26 2007 +0100
29092 ppc4xx: Change 4xx POST ethernet test to handle cached memory too
29094 This patch enables the 4xx EMAC POST driver to work too, when dcache is
29097 Signed-off-by: Stefan Roese <sr@denx.de>
29099 commit a2685904061b35a17583d65fe47cdc2686a69eaa
29100 Author: Stefan Roese <sr@denx.de>
29101 Date: Wed Oct 31 20:45:53 2007 +0100
29103 ppc4xx: Remove temporary TLB entry in POST cache test only for 440
29105 Signed-off-by: Stefan Roese <sr@denx.de>
29107 commit ff768cb168d8157c24a25016dbfbeb465e47f420
29108 Author: Stefan Roese <sr@denx.de>
29109 Date: Wed Oct 31 18:01:24 2007 +0100
29111 ppc4xx: Change 4xx ethernet driver to handle cached memory too
29113 This patch enables the 4xx EMAC driver to work too, when dcache is
29116 Signed-off-by: Stefan Roese <sr@denx.de>
29118 commit 483e09a223c666269ef81d3573a6591b1046b0ef
29119 Author: Stefan Roese <sr@denx.de>
29120 Date: Wed Oct 31 17:59:22 2007 +0100
29122 ppc4xx: Add change_tlb function to modify I attribute of TLB(s)
29124 This function is used to either turn cache on or off in a specific
29127 Signed-off-by: Stefan Roese <sr@denx.de>
29129 commit d25dfe08fbd1220cb994e7e6b105049aa9aa8e79
29130 Author: Stefan Roese <sr@denx.de>
29131 Date: Wed Oct 31 17:57:52 2007 +0100
29133 ppc4xx: Remove cache definition from 4xx board config files
29135 All 4xx board config files don't need the cache definitions anymore.
29136 These are now defined in common headers.
29138 Signed-off-by: Stefan Roese <sr@denx.de>
29140 commit 9b94ac61d2176185c30adf0793e079ec30e68687
29141 Author: Stefan Roese <sr@denx.de>
29142 Date: Wed Oct 31 17:55:58 2007 +0100
29144 ppc4xx: Rework 4xx cache support
29146 New cache handling functions added and all existing functions
29147 moved from start.S into seperate cache.S.
29149 Signed-off-by: Stefan Roese <sr@denx.de>
29151 commit 06713773da4ac3d390c63d82641eb553224b27c2
29152 Author: Stefan Roese <sr@denx.de>
29153 Date: Tue Oct 23 18:03:12 2007 +0200
29155 ppc4xx: Remove compiler warning from previous commit
29157 Signed-off-by: Stefan Roese <sr@denx.de>
29159 commit 6fa397df67c0f269e4528bf181a6e8c88f9723f9
29160 Author: Stefan Roese <sr@denx.de>
29161 Date: Tue Oct 23 14:40:30 2007 +0200
29163 ppc4xx: Remove temporary TLB entry in POST cache test
29165 Signed-off-by: Stefan Roese <sr@denx.de>
29167 commit 1338e6a81834099ba19733b69aafd8ef5f098094
29168 Author: Stefan Roese <sr@denx.de>
29169 Date: Tue Oct 23 14:05:08 2007 +0200
29171 ppc4xx: Change autonegotiation timeout from 4 to 5 seconds
29173 I lately noticed, that newer 4xx board with GBit support sometimes don't
29174 finish link autonegotiation in 4 seconds. Changing this timeout to 5
29175 seconds seems fine here.
29177 Signed-off-by: Stefan Roese <sr@denx.de>
29179 commit 2d83476a4c1c9911d158a3f8a4312d354bc1bdb7
29180 Author: Stefan Roese <sr@denx.de>
29181 Date: Tue Oct 23 14:03:17 2007 +0200
29183 ppc4xx: Change 4xx_enet & miiphy to use out_be32() and friends
29185 This patch changes all in32/out32 calls to use the recommended in_be32/
29186 out_be32 macros instead.
29188 Signed-off-by: Stefan Roese <sr@denx.de>
29190 commit 7d47cee2cc57f907380f2c06f5b6c683d03e423a
29191 Author: Stefan Roese <sr@denx.de>
29192 Date: Thu Oct 25 12:24:59 2007 +0200
29194 ppc4xx: Fix POST ethernet test for Haleakala
29196 The POST ethernet test needed to be changed to dynamically determine
29197 the count of ethernet devices. This code is cloned from the 4xx
29200 Signed-off-by: Stefan Roese <sr@denx.de>
29202 commit f10493c6d77a1e07a6c2ff4d772937a5e7359d6a
29203 Author: Stefan Roese <sr@denx.de>
29204 Date: Tue Oct 23 11:31:05 2007 +0200
29206 ppc4xx: Correct UART input clock calculation and passing to fdt
29208 We now use a value in the gd (global data) structure for the UART input
29209 frequency, since the PPC4xx_SYS_INFO struct is always rewritten completely
29212 Signed-off-by: Stefan Roese <sr@denx.de>
29214 commit 353f2688b4e0fc7b969bc70a02be4b40bf0dd124
29215 Author: Stefan Roese <sr@denx.de>
29216 Date: Tue Oct 23 10:10:08 2007 +0200
29218 ppc4xx: Add initial AMCC Haleakala PPC405EXr eval board support
29220 The Haleakala is nearly identical with the Kilauea eval board. The only
29221 difference is that the 405EXr only supports one EMAC and one PCIe
29222 interface. This patch adds support for the Haleakala board by using
29223 the identical image for Kilauea and Haleakala. The distinction is done
29224 by comparing the PVR.
29226 Signed-off-by: Stefan Roese <sr@denx.de>
29228 commit 9f798766aa85e62eb8fa8c721e148df609b78137
29229 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
29230 Date: Tue Oct 23 08:29:10 2007 +0200
29232 ppc4xx: Fixed offset of refresh rate type for Bamboo on-board DDR SDRAM
29234 This patch also adds a note to the fixed DDR setup for Bamboo NAND booting:
29237 As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed
29238 DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM
29239 modules are still plugged in. So it is recommended to remove the DIMM
29240 modules while using the NAND booting code with the fixed SDRAM setup!
29242 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
29243 Signed-off-by: Stefan Roese <sr@denx.de>
29245 commit afe9fa59cb63b4f9d16bf01c93eb212f25a38c2a
29246 Author: Stefan Roese <sr@denx.de>
29247 Date: Mon Oct 22 16:24:44 2007 +0200
29249 ppc4xx: Add SNTP support to AMCC Katmai, Kilauea & Makalu boards
29251 Signed-off-by: Stefan Roese <sr@denx.de>
29253 commit 3248f63ad89cb031491edb7016587fe6e9a238b9
29254 Author: Stefan Roese <sr@denx.de>
29255 Date: Mon Oct 22 16:22:40 2007 +0200
29257 ppc4xx: Rework of 4xx serial driver (4)
29261 - Use in_8/out_8 macros instead of in8/out8
29262 - No need for UART_BASE marco anymore, now really handled via function
29264 - serial_init_common() introduced
29265 - Further coding style cleanup
29267 Signed-off-by: Stefan Roese <sr@denx.de>
29269 commit e61cb8163a66b8a135696ae232e2bead1ce0a049
29270 Author: Stefan Roese <sr@denx.de>
29271 Date: Mon Oct 22 15:45:49 2007 +0200
29273 ppc4xx: Rework of 4xx serial driver (3)
29275 Change all linker scripts to reference the changed driver name iop480_uart.o.
29277 Signed-off-by: Stefan Roese <sr@denx.de>
29279 commit 882ae41274921f9016131806bdeb27e19606f47a
29280 Author: Stefan Roese <sr@denx.de>
29281 Date: Mon Oct 22 15:44:39 2007 +0200
29283 ppc4xx: Rework of 4xx serial driver (2)
29285 Change all linker scripts to reference the changed driver name 4xx_uart.o.
29287 Note: In most cased all these explicit referencing of these object files
29288 in the linker scripts is not neccessary. Only for manually embedded
29289 environment into the U-Boot image, which is not done is most cases.
29291 Signed-off-by: Stefan Roese <sr@denx.de>
29293 commit ad31e40bed042cb670d0036fea96435007afb838
29294 Author: Stefan Roese <sr@denx.de>
29295 Date: Mon Oct 22 15:09:59 2007 +0200
29297 ppc4xx: Rework of 4xx serial driver (1)
29299 This patch starts the rework of the PPC4xx serial driver. First we split
29300 the file into two seperate files, one 4xx_uart.c with the 405/440 UART
29301 handling code and the other one iop480_uart.c with the UART code for the
29302 PLX-Tech IOP480 PPC (PPC403 based).
29304 Signed-off-by: Stefan Roese <sr@denx.de>
29306 commit 764e7417ee5f6e25b1715720e7d7dd3487109385
29307 Author: Stefan Roese <sr@denx.de>
29308 Date: Mon Oct 22 10:30:38 2007 +0200
29310 ppc4xx: Correct UART input clock calculation and passing to fdt
29312 Signed-off-by: Stefan Roese <sr@denx.de>
29314 commit 211ea91ac6c225bec7e668a03d0ba7d7310679fa
29315 Author: Stefan Roese <sr@denx.de>
29316 Date: Mon Oct 22 07:34:34 2007 +0200
29318 ppc4xx: Add initial AMCC Makalu 405EX support
29320 Signed-off-by: Stefan Roese <sr@denx.de>
29322 commit fa8aea20456e6f1dba43f46bcc72024dd9499998
29323 Author: Stefan Roese <sr@denx.de>
29324 Date: Mon Oct 22 07:33:52 2007 +0200
29326 ppc4xx: Add freqUART to CPU speed detection
29328 This value is needed later for the device tree configuration of
29331 Signed-off-by: Stefan Roese <sr@denx.de>
29333 commit 837c730b4d7c6b1ddf3d1e247cb4445005d9bf0d
29334 Author: Stefan Roese <sr@denx.de>
29335 Date: Sun Oct 21 14:26:29 2007 +0200
29337 ppc: Small Kilauea cleanup of config file
29339 Signed-off-by: Stefan Roese <sr@denx.de>
29341 commit 758c037aeead34b49631b8da3a90b1bba14c0410
29342 Author: Stefan Roese <sr@denx.de>
29343 Date: Sun Oct 21 08:16:12 2007 +0200
29345 rtc: Add Xicor/Intersil X1205 RTC support
29347 This patch adds support for the Xicor/Intersil X1205 RTC used on the
29348 AMCC Makalu eval board. This driver is basically cloned from the Linux
29349 driver version (2.6.23).
29351 This patch also introduces the Linux bcd.h header for the BCD2BIN/
29352 BIN2BCD conversions. In the future some of the other U-Boot RTC driver
29353 should be converted to also use this header instead of implementing
29354 their own local copy of these functions/macros.
29356 Signed-off-by: Stefan Roese <sr@denx.de>
29358 commit 087dfdb79b5fd1ab99a26990c62a732c01a8c7f6
29359 Author: Stefan Roese <sr@denx.de>
29360 Date: Sun Oct 21 08:12:41 2007 +0200
29362 ppc4xx: Consolidate some of the 405 and 440 macros/structs into 4xx
29364 This patch moves some common 4xx macros and the PPC405_SYS_INFO/
29365 PPC440_SYS_INFO structure into the common ppc4xx.h header.
29367 Lot's of other macros are good candidates to be consolidated this way
29370 Signed-off-by: Stefan Roese <sr@denx.de>
29372 commit 770c7af5800f598d22730d1f4b70f16c9b33512e
29373 Author: Stefan Roese <sr@denx.de>
29374 Date: Sun Oct 21 08:05:18 2007 +0200
29376 ppc4xx: Fix size setup in Kilauea DDR2 init routine
29378 The size was initilized wrong. Instead of 256MB, the DDR2 controller
29379 was setup to 512MB. Now the correct values is used.
29381 This patch also does a little cleanup and adds a comment here.
29383 Signed-off-by: Stefan Roese <sr@denx.de>
29385 commit f6ba9b56607d4b27550301c7c7f6b55b654fd62a
29386 Author: Eugene O'Brien <eugene.obrien@advantechamt.com>
29387 Date: Thu Oct 18 17:29:04 2007 +0200
29389 ppc4xx: Define CONFIG_BOOKE for all PPC440 based processors
29391 CONFIG_BOOKE must be defined for PPC440 processors so that the proper SPR
29392 number is used to access system registers.
29394 Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
29395 Signed-off-by: Stefan Roese <sr@denx.de>
29397 commit c36c68160333ac5fe41ec3db12a728b7075b3912
29398 Author: Stefan Roese <sr@denx.de>
29399 Date: Thu Oct 18 07:42:27 2007 +0200
29401 ppc4xx: Change inbound PCIe location for endpoint tests on Katmai
29403 On Yucca & Katmai, the inbound memory map pointed to 0x4.0000.0000, which
29404 is the internal SRAM. Since I now ported and tested this endpoint mode
29405 on Kilauea successfully to map to 0 (SDRAM), I also changed this for
29408 Yucca will stay at internal SRAM for now. Not sure if somebody relies on
29411 Signed-off-by: Stefan Roese <sr@denx.de>
29413 commit 5cb4af4791f61843432155142b6cfac901f66c10
29414 Author: Stefan Roese <sr@denx.de>
29415 Date: Thu Oct 18 07:39:38 2007 +0200
29417 ppc4xx: Add PCIe endpoint support on Kilauea (405EX)
29419 This patch adds endpoint support for the AMCC Kilauea eval board. It can
29420 be tested by connecting a reworked PCIe cable (only 1x lane singles
29421 connected) to another root-complex.
29423 In this test setup, a 64MB inbound window is configured at BAR0 which maps
29424 to 0 on the PLB side. So accessing this BAR0 from the root-complex will
29425 access the first 64MB of the SDRAM on the PPC side.
29427 Signed-off-by: Stefan Roese <sr@denx.de>
29429 commit d4cb2d17946466740afeb195a57d6cb290bf4cc0
29430 Author: Stefan Roese <sr@denx.de>
29431 Date: Sat Oct 13 16:43:23 2007 +0200
29433 ppc4xx: Dynamic configuration of 4xx PCIe mode as root or endpoint mode
29435 This patch adds support for dynamic configuration of PCIe ports for the
29436 AMCC PPC4xx boards equipped with PCIe interfaces. These are the PPC440SPe
29437 boards Yucca & Katmai and the 405EX board Kilauea.
29439 This dynamic configuration is done via the "pcie_mode" environement
29440 variable. This variable can be set to "EP" or "RP" for endpoint or
29441 rootpoint mode. Multiple values can be joined via the ":" delimiter.
29446 This way, PCIe port 0 will be configured as rootpoint, PCIe port 1 and 2
29449 Per default Yucca will be configured as:
29452 Per default Katmai will be configured as:
29453 pcie_mode=RP:RP:REP
29455 Per default Kilauea will be configured as:
29458 Signed-off-by: Tirumala R Marri <tmarri@amcc.com>
29459 Signed-off-by: Stefan Roese <sr@denx.de>
29461 commit fd671802b67a0ef37a06124fa2ce85f00aa22c6f
29462 Author: Stefan Roese <sr@denx.de>
29463 Date: Thu Oct 11 11:15:59 2007 +0200
29465 ppc4xx: Enable device tree support (fdt) on Kilauea per default
29467 This patch enables the fdt support on the AMCC Kilauea eval board.
29468 Additionally now EBC ranges fdt fixup is included to support NOR
29469 FLASH mapping via the Linux physmap_of driver.
29471 This Kilauea port now support booting arch/ppc and arch/powerpc
29472 Linux kernels. The default environment "net_nfs" is for arch/ppc
29473 and "net_nfs_fdt" is for arch/powerpc. In the long run, arch/ppc
29474 support will be removed.
29476 Signed-off-by: Stefan Roese <sr@denx.de>
29478 commit 4994ffd890b9d95d807387a9b7bd8a4803ee406e
29479 Author: Stefan Roese <sr@denx.de>
29480 Date: Thu Oct 11 11:11:45 2007 +0200
29482 ppc4xx: Add additional debug info to 4xx fdt support
29484 Signed-off-by: Stefan Roese <sr@denx.de>
29486 commit db3232ddb058d0ed0bc31f7c5c296748a1afac67
29487 Author: Stefan Roese <sr@denx.de>
29488 Date: Fri Oct 5 21:28:58 2007 +0200
29490 ppc4xx: Fix small merge problems with CPCI440 and Acadia boards
29492 Signed-off-by: Stefan Roese <sr@denx.de>
29494 commit 1941cce71b1ae975602854045061e82f94ecd012
29495 Author: Stefan Roese <sr@denx.de>
29496 Date: Fri Oct 5 17:35:10 2007 +0200
29498 ppc4xx: Fix small merge problem in 4xx_enet.c
29500 Signed-off-by: Stefan Roese <sr@denx.de>
29502 commit 566806ca1a1bf4d895daaf0b2ba5494abbffebaf
29503 Author: Stefan Roese <sr@denx.de>
29504 Date: Fri Oct 5 17:11:30 2007 +0200
29506 ppc4xx: Add initial AMCC Kilauea 405EX support
29508 Signed-off-by: Stefan Roese <sr@denx.de>
29510 commit dbbd125721aea6645fdb962f36bd41f59e272f9d
29511 Author: Stefan Roese <sr@denx.de>
29512 Date: Fri Oct 5 17:10:59 2007 +0200
29514 ppc4xx: Add PPC405EX support
29516 Signed-off-by: Stefan Roese <sr@denx.de>
29518 commit 1d7b874e9c9a7c66f5d8da9ec78a3733765d3e31
29519 Author: Stefan Roese <sr@denx.de>
29520 Date: Fri Oct 5 17:09:36 2007 +0200
29522 ppc4xx: Cleanup of 4xx PCI and PCIe support (renaming)
29524 Signed-off-by: Stefan Roese <sr@denx.de>
29526 commit 4f14ed6230b9c109aac9a6fb878497dabd44c2db
29527 Author: Stefan Roese <sr@denx.de>
29528 Date: Fri Oct 5 17:07:50 2007 +0200
29530 ppc4xx: Add initial fdt support to 4xx (first needed on 405EX)
29532 Signed-off-by: Stefan Roese <sr@denx.de>
29534 commit a424a8bb2924b90724b944165d3141f1fa8dfe5b
29535 Author: Stefan Roese <sr@denx.de>
29536 Date: Fri Oct 5 17:04:57 2007 +0200
29538 POST: Add 405EX support to 4xx UART POST test
29540 Signed-off-by: Stefan Roese <sr@denx.de>
29542 commit 4f2e92c11f6e2392fc8187829211a5ca7f0c1e12
29543 Author: Stefan Roese <sr@denx.de>
29544 Date: Fri Oct 5 15:10:02 2007 +0200
29546 DTT: Prepare DS1775 driver for use of different I2C addresses
29548 Signed-off-by: Stefan Roese <sr@denx.de>
29550 commit 19e93b1e16d267220440d827b920fbad8abfa70f
29551 Author: Stefan Roese <sr@denx.de>
29552 Date: Fri Oct 5 14:23:43 2007 +0200
29554 ppc4xx: 4xx_pcie: Change PCIe status output to match common style
29556 Signed-off-by: Stefan Roese <sr@denx.de>
29558 commit ff68f66bcb0da847845aa2fac11eba6c25938c99
29559 Author: Stefan Roese <sr@denx.de>
29560 Date: Fri Oct 5 09:22:33 2007 +0200
29562 ppc4xx: 4xx_pcie: Disable debug output as default
29564 Signed-off-by: Stefan Roese <sr@denx.de>
29566 commit 97923770cb52b64d69eec958a11b2eda8d46e0f7
29567 Author: Stefan Roese <sr@denx.de>
29568 Date: Fri Oct 5 09:18:23 2007 +0200
29570 ppc4xx: 4xx_pcie: More general cleanup and 405EX PCIe support added
29572 Signed-off-by: Stefan Roese <sr@denx.de>
29574 commit 4dbee8a90df613eb517aadbecebd70f168913d30
29575 Author: Stefan Roese <sr@denx.de>
29576 Date: Fri Oct 5 07:57:20 2007 +0200
29578 ppc4xx: 4xx_pcie: Change CFG_PCIE_MEMSIZE to 128MB on Yucca & Katmai
29580 128MB seems to be the smallest possible value for the memory size
29581 for on PCIe port. With this change now the BAR's of the PCIe cards
29582 are accessible under U-Boot.
29584 One big note: This only works for PCIe port 0 & 1. For port 2 this
29585 currently doesn't work, since the base address is now 0xc0000000
29586 (0xb0000000 + 2 * 0x08000000), and this is already occupied by
29587 CFG_PCIE0_CFGBASE. But solving this issue for port 2 would mean
29588 to change the base addresses completely and this change would have
29589 too much impact right now.
29591 This patch adds debug output to the 4xx pcie driver too.
29593 Signed-off-by: Stefan Roese <sr@denx.de>
29595 commit 6d95289281ed2958ebf76d2b55f86bbd88591fd2
29596 Author: Stefan Roese <sr@denx.de>
29597 Date: Wed Oct 3 21:16:32 2007 +0200
29599 ppc4xx: 4xx_pcie: Fix problem with SDRN access using port number as idx
29601 Signed-off-by: Stefan Roese <sr@denx.de>
29603 commit 3048bcbf0bad262378c5af68f2bf6778fb7d829a
29604 Author: Stefan Roese <sr@denx.de>
29605 Date: Wed Oct 3 15:01:02 2007 +0200
29607 ppc4xx: Rename 405gp_pci to 4xx_pci since its used on all 4xx platforms
29609 These files were introduced with the IBM 405GP but are currently used on all
29610 4xx PPC platforms. So the name doesn't match the content anymore. This patch
29611 renames the files to 4xx_pci.c/h.
29613 Signed-off-by: Stefan Roese <sr@denx.de>
29615 commit 94276eb0a7a35b9e8c053d589ae225b0f017a237
29616 Author: Stefan Roese <sr@denx.de>
29617 Date: Wed Oct 3 14:14:58 2007 +0200
29619 ppc4xx: Add a comment for 405EX PCIe endpoint configuration
29621 Signed-off-by: Stefan Roese <sr@denx.de>
29623 commit 03d344bb6a5f082ea10ec9d753558ea7dfd1c626
29624 Author: Stefan Roese <sr@denx.de>
29625 Date: Wed Oct 3 10:38:09 2007 +0200
29627 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (3)
29629 (3) This patch introduces macros like SDRN_PESDR_DLPSET(port) to access
29630 the SDR registers of the PCIe ports. This makes the overall design
29631 clearer, since it removed a lot of switch statements which are not
29634 Also, the functions ppc4xx_init_pcie_rootport() and
29635 ppc4xx_init_pcie_entport() are merged into a single function
29636 ppc4xx_init_pcie_port(), since most of the code was duplicated.
29637 This makes maintainance and porting to other 4xx platforms
29640 Signed-off-by: Stefan Roese <sr@denx.de>
29642 commit 026f71106871f31d17d0ea0db9a7547ff92934bc
29643 Author: Stefan Roese <sr@denx.de>
29644 Date: Wed Oct 3 07:48:09 2007 +0200
29646 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (2)
29648 This patch is the first patch of a series to make the 440SPe PCIe code
29649 usable on different 4xx PPC platforms. In preperation for the new 405EX
29650 which is also equipped with PCIe interfaces.
29652 (2) This patch renames the functions from 440spe_ to 4xx_ with a
29653 little additional cleanup
29655 Signed-off-by: Stefan Roese <sr@denx.de>
29657 commit c7c6da23028f146d912514b95aefa3da7cf37699
29658 Author: Stefan Roese <sr@denx.de>
29659 Date: Wed Oct 3 07:34:10 2007 +0200
29661 ppc4xx: Make 440SPe PCIe code more generic to use on different 4xx PPCs (1)
29663 This patch is the first patch of a series to make the 440SPe PCIe code
29664 usable on different 4xx PPC platforms. In preperation for the new 405EX
29665 which is also equipped with PCIe interfaces.
29667 (1) This patch renames the files from 440spe_pcie to 4xx_pcie
29669 Signed-off-by: Stefan Roese <sr@denx.de>
29671 commit 245a362ad3c0c1b84fccc9fec7b623eb14f6e502
29672 Author: Marian Balakowicz <m8@semihalf.com>
29673 Date: Wed Oct 24 01:37:36 2007 +0200
29675 TQM5200: Call usb_cpu_init() during board init
29677 usb_cpu_init() configures GPS USB pins, clocks, etc. and
29678 is required for proper operation of kernel USB subsystem.
29679 This setup was previously done in the kernel by the fixup
29680 code which is being removed, thus low level init must be
29681 done by U-boot now.
29683 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
29684 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29686 commit b5af773f8d92677e06f3295b45557c9d0a487c24
29687 Author: Zhang Wei <wei.zhang@freescale.com>
29688 Date: Thu Oct 25 17:51:27 2007 +0800
29690 Fix the issue of usb_kbd driver missing the scan code of key 'z'.
29692 The scan code of the key 'z' is 0x1d, which should be handled.
29694 The change has be tested on NOVATEK USB keyboard and ULI PCI OHCI
29697 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
29698 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29700 commit 85ac988e86f9414fa645b0148dc66c3520a1eb84
29701 Author: Rodolfo Giometti <giometti@enneenne.com>
29702 Date: Mon Oct 15 11:59:17 2007 +0200
29704 PXA USB OHCI: "usb stop" implementation.
29706 Some USB keys need to be switched off before loading the kernel
29707 otherwise they can remain in an undefined status which prevents them
29708 to be correctly recognized by the kernel.
29710 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
29711 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
29713 commit 31548249decf18a6b877a18436b6139dd483fe4a
29714 Author: Justin Flammia <jflammia@savantav.com>
29715 Date: Mon Oct 29 17:40:35 2007 -0400
29719 This is a multi-part message in MIME format.
29721 commit e6e505eae94ed721e123e177489291fc4544b7b8
29722 Author: Justin Flammia <jflammia@savantav.com>
29723 Date: Mon Oct 29 17:19:03 2007 -0400
29725 Found a bug in the way the DHCP Request packet is built, where the IP address
29726 that is offered by the server is bound to prematurely. This patch is a fix of
29727 that bug where the IP address offered by the DHCP server is not used until
29728 after the DHCP ACK from the server is received.
29730 Signed-off-by: Justin Flammia <jflammia@savantav.com>
29731 Signed-off-by: Ben Warren <bwarren@qstreams.com>
29733 commit e8ee8f3ade2a06c1893dd5e68f223070d650c7ed
29734 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29735 Date: Thu Oct 25 17:16:22 2007 -0500
29737 ColdFire 54455: Fix correct boot location for atmel and intel
29739 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29741 commit 688e8eb414ac111cca7ce60bdf30e805ab9a7bcb
29742 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29743 Date: Thu Oct 25 17:14:00 2007 -0500
29745 ColdFire: Fix build error when CONFIG_WATCHDOG is defined
29747 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29749 commit c67e12e705b204cfe914e3e3e693d69a445dcabf
29750 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29751 Date: Thu Oct 25 17:12:36 2007 -0500
29753 ColdFire 5329: Assign correct SDRAM size and fix cache
29755 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29757 commit 95e9f2c212a65610b2e59a5c00d0113383a4da0b
29758 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29759 Date: Thu Oct 25 17:10:23 2007 -0500
29761 ColdFire 5253: Assign correct SDRAM size
29763 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29765 commit 2acefa72ee0026f862ab65597ca687428f63a973
29766 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29767 Date: Thu Oct 25 17:09:17 2007 -0500
29769 ColdFire 5282: Fix external flash boot and return dramsize
29771 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
29773 commit d78791ae914d4e7c5edca1cdad73b3dc81a4eb82
29774 Author: Bartlomiej Sieka <tur@semihalf.com>
29775 Date: Thu Oct 25 17:20:01 2007 +0200
29777 TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).
29779 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
29781 commit 1a0ce20aa4cb4e3068da04e7290ee9986fd0b834
29782 Author: Martin Krause <martin.krause@tqs.de>
29783 Date: Wed Oct 24 08:42:25 2007 +0200
29785 TQM5200: fix spurious characters on second serial interface
29787 With this patch PSC3 is configured as UART. This is done, because if
29788 the pins of PSC3 are not configured at all (-> all pins are GPI),
29789 due to crosstalk, spurious characters may be send over the RX232_2_TXD
29792 Signed-off-by: Martin Krause <martin.krause@tqs.de>
29793 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
29795 commit be4a87f11e297a5cededbf7dd71c0248f3874acd
29796 Author: Martin Krause <martin.krause@tqs.de>
29797 Date: Wed Oct 24 08:41:27 2007 +0200
29799 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
29801 Some commands for the STK52xx base board try to access the SM501 grafic
29802 controller. But the TQM5200S has no grafic controller (only the TQM5200
29803 and the TQM5200B have). This patch deactivates the commands accessing
29804 the SM501 for the TQM5200S.
29806 Signed-off-by: Martin Krause <martin.krause@tqs.de>
29807 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
29809 commit b31f64343ead9482cd439b1adbe4c34026a641b1
29810 Author: Martin Krause <martin.krause@tqs.de>
29811 Date: Mon Oct 22 16:45:53 2007 +0200
29813 TQM5200: fix spurious characters on second serial interface
29815 With this patch PSC3 is configured as UART. This is done, because if
29816 the pins of PSC3 are not configured at all (-> all pins are GPI),
29817 due to crosstalk, spurious characters may be send over the RX232_2_TXD
29820 Signed-off-by: Martin Krause <martin.krause@tqs.de>
29822 commit 0fc0f91b20ffa802f5a66534ca5c2844910583f6
29823 Author: Martin Krause <martin.krause@tqs.de>
29824 Date: Mon Oct 22 16:40:06 2007 +0200
29826 TQM5200S: fix commands for STK52xx base board because of missing SM501 grafic controller
29828 Some commands for the STK52xx base board try to access the SM501 grafic
29829 controller. But the TQM5200S has no grafic controller (only the TQM5200
29830 and the TQM5200B have). This patch deactivates the commands accessing
29831 the SM501 for the TQM5200S.
29833 Signed-off-by: Martin Krause <martin.krause@tqs.de>
29835 commit 7b0a42219f30277f71f4405cbaf8a269f6d2d227
29836 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29837 Date: Sun Oct 21 09:14:28 2007 +0200
29839 Mips: Fix string functions differ prototype declaration
29841 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29843 commit cb8250fe4b3c4ed549b270e8a20bc22060e7e1d2
29844 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
29845 Date: Fri Oct 19 17:51:40 2007 -0500
29847 fsl_pci_init enable COMMAND_MEMORY if inbound window
29849 Patch 16e23c3f removed PCSRBAR allocation. But passing zero windows
29850 to pciauto_setup_device has the side effect of not getting
29851 COMMAND_MEMORY set.
29853 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
29855 commit e9d0d527992566ebef9826962ff1745b2f082b92
29856 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29857 Date: Fri Oct 19 10:55:24 2007 +0200
29859 delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declaration
29861 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29863 commit 9c4884f54da982ce990c7d1760ac81b0704d3c64
29864 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29865 Date: Fri Oct 19 08:10:15 2007 +0200
29867 fix warning: no return statement in function returning non-void
29869 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29871 commit e78220f6e514206757acfe247297fc9a328a881f
29872 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29873 Date: Fri Oct 19 06:33:45 2007 +0200
29875 xsengine: Fix no partition type specified, use DOS as default
29877 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29879 commit 10cdb8dbd67a818823ab9ec88b68fc348903db59
29880 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29881 Date: Fri Oct 19 00:24:59 2007 +0200
29883 lubbock: Fix no partition type specified, use DOS as default
29885 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29887 commit 41b4d282d38fa7231c315c5f6cfff5bdd24e0191
29888 Author: Wolfgang Denk <wd@denx.de>
29889 Date: Tue Oct 23 16:50:03 2007 +0200
29891 Coding style: keep lists sorted; update CHANGELOG
29893 Signed-off-by: Wolfgang Denk <wd@denx.de>
29895 commit 58b74b05c621e2835ecf4e2d3243042cf4186777
29896 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29897 Date: Fri Oct 19 00:09:05 2007 +0200
29899 Fix missing drivers makefile entries ds1722.c mw_eeprom.c
29901 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29903 commit 96455bfebc9887837095c9051d216f53c61b5f10
29904 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29905 Date: Fri Oct 19 00:07:39 2007 +0200
29907 Fix warning differ in signedness in board/innokom/innokom.c
29909 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
29911 commit 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd
29912 Author: Marcel Ziswiler <marcel@ziswiler.com>
29913 Date: Fri Oct 19 00:25:33 2007 +0200
29915 fix pxa255_idp board
29917 The pxa255_idp being an old unmaintained board showed several issues:
29918 1. CONFIG_INIT_CRITICAL was still defined.
29919 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
29920 3. Symbol flash_addr was undeclared.
29921 4. The boards lowlevel_init function was still called memsetup.
29922 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
29923 6. Using -march=armv5 instead of -march=armv5te resulted in lots of
29924 'target CPU does not support interworking' warnings on recent compilers.
29925 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
29926 indexes rather than the register definitions from the pxa-regs header
29927 file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
29928 avoid any ambiguities.
29929 8. There were several redefinition warnings concerning ICMR, OSMR3,
29930 OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
29931 9. The board configuration file was rather outdated.
29932 10. The part header file defined the vendor, product and revision arrays
29933 as unsigned chars instead of just chars in the block_dev_desc_t
29936 Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
29938 commit 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6
29939 Author: Rune Torgersen <runet@innovsys.com>
29940 Date: Wed Oct 17 11:56:31 2007 -0500
29942 Make MPC8266ADS command selection more robust
29944 Fix MPC8266 command line definition so it won't break when new commands
29945 are added to u-boot.
29946 Signed-off-by Rune Torgersen <runet@innovsys.com>
29948 commit d3afa1ee19345a31fd1eaad3e98b97d13ca47315
29949 Author: Bartlomiej Sieka <tur@semihalf.com>
29950 Date: Tue Oct 23 13:14:10 2007 +0200
29952 Motion-PRO: Update configuration to accomodate next generation board.
29954 New board has faster oscillator and a different Flash chip. This affects:
29955 - CFG_MPC5XXX_CLKIN
29957 - Flash CS configuration (timings)
29958 - Flash sector size, and thus MTD partition layout
29959 - malloc() arena size (due to bigger Flash sectors)
29960 - smaller memory test range (due to bigger malloc() arena)
29962 This patch also enables more extensive memory testing via "mtest".
29964 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
29966 commit eff501904df2bf1724a750062628ba2c51dbb1f8
29967 Author: Bartlomiej Sieka <tur@semihalf.com>
29968 Date: Tue Oct 23 11:36:07 2007 +0200
29970 Motion-PRO: Add setting of SDelay reg. to SDRAM controller configuration.
29972 Per AN3221 (MPC5200B SDRAM Initialization and Configuration), the SDelay
29973 register must be written a value of 0x00000004 as the first step of the
29974 SDRAM contorller configuration.
29976 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
29978 commit 7a9348728ebda63cdbaacffd83099aa71d9d4c54
29979 Author: Peter Pearse <peter.pearse@arm.com>
29980 Date: Tue Oct 23 10:22:16 2007 +0100
29982 Move PL01* serial drivers to drivers/serial and adjust Makefiles.
29984 commit 20d500d531a6b971ce6cc1bf191cb0092cdc0afc
29985 Author: Stefan Roese <sr@denx.de>
29986 Date: Tue Oct 23 10:17:42 2007 +0200
29988 ppc4xx: lwmon5: Some further GPIO config changes
29990 Signed-off-by: Stefan Roese <sr@denx.de>
29992 commit de9a738faa7c2f47286119c3bfebc3dfbfe7d86d
29993 Author: Vlad Lungu <vlad@comsys.ro>
29994 Date: Sun Oct 21 22:10:10 2007 +0900
29996 [MIPS] Fix UNCACHED_SDRAM
29998 PHYSADDR is for physical address, KSEG1ADDR is for uncached.
30000 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30001 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30003 commit 00101dd7a32d12f698150123e47e4b3420279f86
30004 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30005 Date: Sun Oct 21 21:30:42 2007 +0900
30007 [MIPS] Add PIC-related switches to PLATFORM_{CPP,LD}FLAGS and cleanup
30009 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30011 commit eb700636db017d310edaeb559b13d82588560674
30012 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30013 Date: Sun Oct 21 10:55:37 2007 +0900
30015 [MIPS] u-boot.lds: Define _gp in a standard manner
30017 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30019 commit 22069215eb7adf5a3888bf7c7784ea9d70a72cd0
30020 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30021 Date: Sun Oct 21 10:55:36 2007 +0900
30023 [MIPS] Fix $gp usage
30025 Now we load $gp with _GLOBAL_OFFSET_TABLE_, but this is incorrect use.
30026 As a general principle, we should use _gp for $gp.
30028 Thanks to linker script's help we fortunately have _gp which equals to
30029 _GLOBAL_OFFSET_TABLE_. But once _gp gets out of alignment, we will not
30030 be able to access to GOT entires, global variables and procedure entry
30031 points. The right thing to do is to use _gp.
30033 This patch also introduce a new symbol `.gpword _GLOBAL_OFFSET_TABLE_'
30034 which holds the offset from _gp. When updating GOT entries, we use this
30035 offset and _gp to calculate the final _GLOBAL_OFFSET_TABLE_.
30037 This patch is originally submitted by Vlad Lungu <vlad@comsys.ro>, then
30038 I made some change to leave over num_got_entries.
30040 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30041 Cc: Vlad Lungu <vlad@comsys.ro>
30043 commit cbf2323b5b8285ea01acba7bbb905a3162d9b021
30044 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30045 Date: Sun Oct 21 10:55:36 2007 +0900
30047 [MIPS] u-boot.lds: Fix __got_start and __got_end
30049 Ensure that __got_start points to top of the `.got', and __got_end points
30050 to bottom as well, so that we never fail to count num_got_entries.
30052 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30054 commit e5f325fec5b48ae705c89522923ba5a2e37cd5c7
30055 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30056 Date: Sun Oct 21 10:55:36 2007 +0900
30058 [MIPS] u-boot.lds: Remove duplicated .sdata section
30060 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
30062 commit 05bf4919c1ce49cdedadacd564d0786a8ed796a1
30063 Author: Wolfgang Denk <wd@denx.de>
30064 Date: Sun Oct 21 01:01:17 2007 +0200
30066 Minor coding style cleanup; update CHANGELOG
30068 Signed-off-by: Wolfgang Denk <wd@denx.de>
30070 commit ff285ca07eda1ea4a8909848cc1cc604ec8fec9c
30071 Author: Vlad Lungu <vlad@comsys.ro>
30072 Date: Thu Oct 4 20:47:10 2007 +0300
30076 Fixed typo in ne2000.h, thinko re n2k_inb() usage, don't try
30077 to do anything in eth_stop() if eth_init() was not called.
30078 Simplified RX path in order to avoid timeouts on really really
30079 fast NE2000 cards (read: qemu with internal tftp), NetLoop() is
30080 clever enough to cope with 1 packet per eth_rx().
30082 Signed-off-by: Vlad Lungu <vlad@comsys.ro>
30084 commit df90968b48fb34fa9072fab150db2ac89678f537
30085 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
30086 Date: Mon Sep 24 13:32:13 2007 -0400
30088 Setting MSR[DE] in do_reset
30091 This patch ensures the soft reset of the board for the 85xx boards
30092 by setting the MSR[DE] in the do_reset function.
30094 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
30096 commit 1e701e701304b3c3a3768ca83dd2ab7b9e88c77d
30097 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
30098 Date: Mon Sep 24 13:36:01 2007 -0400
30103 This patch fixes the MSR overwrite in the start.S when moving out of
30106 Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
30108 commit 5c7ea64bb74a850a2b2303f853a8270695ad8602
30109 Author: Dan Wilson <dwilson@fulcrummicro.com>
30110 Date: Fri Oct 19 11:33:48 2007 -0500
30112 tsec driver should clear RHALT on startup
30114 This was causing problems for some people.
30116 Signed-off-by: Alain Gravel <agravel@fulcrummicro.com>
30117 Signed-off-by: Dan Wilson <dwilson@fulcrummicro.com>
30118 Signed-off-by: Andy Fleming <afleming@freescale.com>
30120 commit 7600d47b8f6a10019e537dc9a62aa1498df58d25
30121 Author: Kumar Gala <galak@kernel.crashing.org>
30122 Date: Thu Oct 11 00:29:18 2007 -0500
30124 Improve handling of PCI interrupt device tree fixup on MPC85xx CDS
30126 On the MPC85xx CDS we have two issues:
30128 1. The device tree fixup code did not check to see if the property we are
30129 trying to update is actually found. Its possible that it would update
30130 random memory starting at 0.
30132 2. Newer Linux kernel's have moved the location of the PCI nodes to be
30133 sibilings of the soc node and not children. The explicit PATH to the PCI
30134 node would not be found for these device trees. Add the ability to handle
30135 both paths. In the future we shouldn't handle such fixups by explicit path.
30137 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30139 commit a3063eec775719b7e91023bbec3f64b3118791df
30140 Author: Kumar Gala <galak@kernel.crashing.org>
30141 Date: Thu Oct 11 00:18:48 2007 -0500
30143 Set OF_STDOUT_PATH to match the default console on MPC8568 MDS
30145 On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured
30146 console. Make it so we match that config what we tell Linux as the early
30149 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30151 commit e1ce3cb617bb06f91f82f98915391175addf3e82
30152 Author: Kumar Gala <galak@kernel.crashing.org>
30153 Date: Tue Oct 2 11:12:27 2007 -0500
30155 Remove magic numbers from cache related operations for mpc85xx
30157 The mpc85xx start code uses some magic numbers that we actually
30158 have #defines for in <config.h> so use those instead.
30160 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
30162 commit 5441f61a3d8b7034f19fc1361183e936198e6dbb
30163 Author: Detlev Zundel <dzu@denx.de>
30164 Date: Fri Oct 19 16:47:26 2007 +0200
30168 Signed-off-by: Detlev Zundel <dzu@denx.de>
30170 commit 281df457c1aa50d2752165d0c5c3282d4027b974
30171 Author: Tony Li <tony.li@freescale.com>
30172 Date: Thu Oct 18 17:47:19 2007 +0800
30174 mpc83xx: Add configure entry for MPC83xx ATM support
30176 Add MPC8360EMDS_ATM_config and MPC832XEMDS_ATM_config into
30177 Makfile and MAKEALL
30179 Signed-off-by: Tony Li <tony.li@freescale.com>
30180 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30182 commit d2646554f529a9577515eceb0ec5eceee18244ba
30183 Author: Tony Li <tony.li@freescale.com>
30184 Date: Thu Oct 18 17:44:38 2007 +0800
30186 mpc83xx: pq-mds-pib.c typo error
30188 Correct to val8 from val.
30190 Signed-off-by: Tony Li <tony.li@freescale.com>
30191 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30193 commit 3e11ae80fec1ee12194940955431186abf6009c2
30194 Author: Stefan Roese <sr@denx.de>
30195 Date: Wed Oct 17 15:40:19 2007 +0200
30197 ppc4xx: Add 667/133 (CPU/PLB) frequency setup to Sequoia bootstrap command
30199 Signed-off-by: Stefan Roese <sr@denx.de>
30201 commit 3c89d75409eb26639d36dfa11d4ee3d8b962dc3c
30202 Author: Jon Loeliger <jdl@freescale.com>
30203 Date: Tue Oct 16 15:27:43 2007 -0500
30205 Initial mpc8610hpcd Makefile files.
30207 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30208 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30209 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30210 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30212 commit 9553df86d3a319c3a1a7cde7e4edd6eeb5aa64c7
30213 Author: Jon Loeliger <jdl@freescale.com>
30214 Date: Tue Oct 16 15:26:51 2007 -0500
30216 Initial mpc8610hpcd cpu/, README and include/ files.
30218 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30219 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30220 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30221 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30223 commit 3dd2db53ceb0dff80f25c2a07f83f29b907b403e
30224 Author: Jon Loeliger <jdl@freescale.com>
30225 Date: Tue Oct 16 13:54:01 2007 -0500
30227 Initial mpc8610hpcd board files.
30229 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30230 Signed-off-by: Mahesh Jade <mahesh.jade@freescale.com>
30231 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
30232 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30234 commit 7ee6ba1a056e4061ab4cfde30127e332e7957afd
30235 Author: runet@innovsys.com <runet@innovsys.com>
30236 Date: Tue Oct 16 14:50:40 2007 -0500
30238 Make MPC8266ADS board compile again.
30240 Signed-off-by: Runet Torgersen <runet@innovsys.com>
30242 commit 2491167c245d8ebe6f2dbd8c4287aaa0d14fe93a
30243 Author: Jon Loeliger <jdl@freescale.com>
30244 Date: Mon Aug 27 12:41:03 2007 -0500
30246 86xx: Allow for fewer DDR slots per memory controller.
30248 As a direct correlation exists between DDR DIMM slots
30249 and SPD EEPROM addresses used to configure them, use
30250 the individually defined SPD_EEPROM_ADDRESS* values to
30251 determine if a DDR DIMM slot should have its SPD
30252 configuration read or not.
30254 Effectively, this now allows for 1 or 2 DIMM slots
30255 per memory controller.
30257 Signed-off-by: Jon Loeliger <jdl@freescale.com>
30259 commit 4d4a945e189a2f384c66432316da2788a0ac1607
30260 Author: Rodolfo Giometti <giometti@enneenne.com>
30261 Date: Mon Oct 15 11:59:17 2007 +0200
30263 PXA USB OHCI: "usb stop" implementation.
30265 Some USB keys need to be switched off before loading the kernel
30266 otherwise they can remain in an undefined status which prevents them
30267 to be correctly recognized by the kernel.
30269 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
30271 commit e2e93442e558cf1500e92861f99713b2f045ea22
30272 Author: Stefan Roese <sr@denx.de>
30273 Date: Mon Oct 15 11:39:00 2007 +0200
30275 ppc4xx: Fix bug in I2C bootstrap values for Sequoia/Rainier
30277 The I2C bootstrap values that can be setup via the "bootstrap" command,
30278 were setup incorrect regarding the generation of the internal sync PCI
30279 clock. The values for PLB clock == 133MHz were slighly incorrect and the
30280 values for PLB clock == 166MHz were totally incorrect. This could
30281 lead to a hangup upon booting while PCI configuration scan.
30283 This patch fixes this issue and configures valid PCI divisor values
30284 for the sync PCI clock, with respect to the provided external async
30287 Here the values of the formula in the chapter 14.2 "PCI clocking"
30288 from the 440EPx users manual:
30290 AsyncPCICLK - 1MHz <= SyncPCIClk <= (2 * AsyncPCIClk) - 1MHz
30292 33MHz async PCI frequency:
30294 => 32 <= 44.3 <= 65 (div = 3)
30297 => 32 <= 55.3 <= 65 (div = 3)
30299 66MHz async PCI frequency:
30301 => 65 <= 66.5 <= 132 (div = 2)
30304 => 65 <= 83 <= 132 (div = 2)
30306 Signed-off-by: Stefan Roese <sr@denx.de>
30308 commit 5a5958b7de70ae99f0e7cbd5c97ec1346e051587
30309 Author: Stefan Roese <sr@denx.de>
30310 Date: Mon Oct 15 11:29:33 2007 +0200
30312 ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & Yosemite
30314 The BCSR status bit for the 66MHz PCI operation was correctly
30315 addressed (MSB/LSB problem). Now the correct currently setup
30316 PCI frequency is displayed upon bootup.
30318 This patch also fixes this problem on Rainier & Yellowstone, since these
30319 boards use the same souce code as Sequoia & Yosemite do.
30321 Signed-off-by: Stefan Roese <sr@denx.de>
30323 commit da3aad55cbde80ab6e301aafa82a2c411aa53eff
30324 Author: Martin Krause <martin.krause@tqs.de>
30325 Date: Wed Sep 26 17:55:56 2007 +0200
30327 TQM860M: adjust for doubled flash sector size.
30329 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
30330 doubled sector size.
30332 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30334 commit 9d29250e2e62f4bf20c7a20b4173d84c48f11f5d
30335 Author: Jens Gehrlein <jens.gehrlein@tqs.de>
30336 Date: Wed Sep 26 17:55:54 2007 +0200
30338 TQM8xx: Fix CAN timing.
30340 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30342 commit d43e489baf02afae49077791fb22332d240d8656
30343 Author: Martin Krause <martin.krause@tqs.de>
30344 Date: Thu Sep 27 14:54:36 2007 +0200
30346 TQM866M: fix SDRAM refresh
30348 At 133 MHz the current SDRAM refresh rate is too fast
30349 (measured 4 * 1.17 us).
30350 CFG_MAMR_PTA changes from 39 to 97. This result
30351 in a refresh rate of 4 * 7.8 us at the default clock
30352 50 MHz. At 133 MHz the value will be then 4 * 2.9 us.
30353 This is a compromise until a new method is found to
30354 adjust the refresh rate.
30356 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30358 commit 9ef57bbee1c67cc01da2026c242c4692db32be36
30359 Author: Martin Krause <martin.krause@tqs.de>
30360 Date: Wed Sep 26 17:55:55 2007 +0200
30362 TQM866M: adjust for doubled flash sector size.
30364 Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
30365 doubled sector size.
30367 Signed-off-by: Martin Krause <martin.krause@tqs.de>
30369 commit f8bf90461d9bad2e6fed31fcebaf235f60dd6763
30370 Author: Michal Simek <monstr@monstr.eu>
30371 Date: Sun Oct 14 16:12:29 2007 +0200
30373 [FIX] XUPV2P change command handling
30374 and remove code violation
30376 commit 636400198228d96983c06657b17f760f5989958e
30377 Author: Wolfgang Denk <wd@denx.de>
30378 Date: Sun Oct 14 00:13:19 2007 +0200
30380 Prepare for 1.3.0-rc3 release
30382 Signed-off-by: Wolfgang Denk <wd@denx.de>
30384 commit 68f14f77ca5fe5f9cc025c8cae101671f628309f
30385 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30386 Date: Sat Sep 29 13:41:37 2007 +0200
30388 Fix warning differ in signedness in cpu/pxa/mmc.c
30390 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30392 commit fc19e36f741e8bc727c0a330170b3b5db90399ef
30393 Author: Wolfgang Denk <wd@denx.de>
30394 Date: Sat Oct 13 23:51:14 2007 +0200
30396 Fix warning differ in signedness in board/mpl/vcma9/vcma9.c
30398 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30399 Signed-off-by: Wolfgang Denk <wd@denx.de>
30401 commit de74b9eeacccaf0a42e5ecc9ae79a88f7a311296
30402 Author: Wolfgang Denk <wd@denx.de>
30403 Date: Sat Oct 13 21:15:39 2007 +0200
30405 Coding Style cleanup.
30407 Signed-off-by: Wolfgang Denk <wd@denx.de>
30409 commit e1893815b0999410d7a327589611c7b38e95299e
30410 Author: Wolfgang Denk <wd@denx.de>
30411 Date: Fri Oct 12 15:49:39 2007 +0200
30413 GP3 SSA: enable RTC
30415 Signed-off-by: Wolfgang Denk <wd@denx.de>
30417 commit 8002012041f1ff9f997a5727abe5015f70cd2e46
30418 Author: Grzegorz Bernacki <gjb@semihalf.com>
30419 Date: Tue Oct 9 13:58:24 2007 +0200
30421 [ads5121] EEPROM support added.
30423 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
30425 commit 7b624ad254b97e5a25dca2304a398b64aeedaffe
30426 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
30427 Date: Sat Oct 6 18:55:35 2007 +0200
30429 AVR32: Initialize bi_flash* in board_init_r
30431 The ATSTK1000-specific flash driver intializes bi_flashstart,
30432 bi_flashsize and bi_flashoffset, but other flash drivers, like the CFI
30435 Initialize these in board_init_r instead so that things will still be
30436 set up correctly when we switch to the CFI driver.
30438 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30440 commit 2b2a587d6d3076387d22ac740f44044bf46e2cb8
30441 Author: Marian Balakowicz <m8@semihalf.com>
30442 Date: Fri Oct 5 10:40:54 2007 +0200
30444 tqm5200: Fix CONFIG_CMD_PCI typo in board config file.
30446 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30448 commit 92869195ef8210758d2176230c0a36897afd50ed
30449 Author: Bartlomiej Sieka <tur@semihalf.com>
30450 Date: Fri Oct 5 09:46:06 2007 +0200
30452 CM5200: Fix missing null-termination in hostname manipulation code
30454 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30456 commit 9add9884b1fddc34ca186e00a2f868ccd5d02d87
30457 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
30458 Date: Tue Oct 2 19:09:01 2007 +0200
30460 Fix memtest breakage
30462 CFG_MEMTEST_START uses weird magic involving gd, which fails to
30463 compile. Use hardcoded values instead (we actually know how much RAM
30466 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30468 commit 738815c0cc44aa329097f868dc1efc49ede9c5ba
30469 Author: Stefan Roese <sr@denx.de>
30470 Date: Tue Oct 2 11:44:46 2007 +0200
30472 ppc4xx: Coding style cleanup
30474 Signed-off-by: Stefan Roese <sr@denx.de>
30476 commit 87c1833a39e944db66385286fd5e28f9b3fcdd50
30477 Author: Stefan Roese <sr@denx.de>
30478 Date: Tue Oct 2 11:44:19 2007 +0200
30480 ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet
30482 Signed-off-by: Stefan Roese <sr@denx.de>
30484 commit 2db64784061bfc34f4ba70ef1d2fbe7133b55670
30485 Author: Grzegorz Bernacki <gjb@semihalf.com>
30486 Date: Mon Oct 1 09:51:50 2007 +0200
30488 Program EPLD to force full duplex mode for PHY.
30490 EPLD forces modes of PHY operation. By default full duplex is turned off.
30491 This fix turns it on.
30493 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
30495 commit 785c13477b77dcd2e6c5128fffcdb4e1943f4818
30496 Author: Timo Ketola <timo.ketola@exertus.fi>
30497 Date: Mon Sep 24 14:50:32 2007 +0300
30499 Bugfix: Use only one PTD for one endpoint
30501 Original isp116x-hcd code prepared multiple PTDs for longer than 16
30502 byte transfers for one endpoint. That is unnecessary because the
30503 ISP116x is able to split long data from one PTD into multiple
30504 transactions based on the buffer size of the endpoint. It also caused
30505 serious problems if the endpoint NAKed some of the transactions. In
30506 that case ISP116x wouldn't notice that the other PTDs were for the same
30507 endpoint and would try the other PTDs possibly out of order. That would
30508 break the whole transfer.
30510 This patch makes isp116x_submit_job to use one PTD for one transfer.
30512 Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
30513 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
30515 commit 86ec86c04326c3913178a7679aa910de071da75d
30516 Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30517 Date: Thu Sep 27 23:27:47 2007 +0200
30519 Fix missing DECLARE_GLOBAL_DATA_PTR on CONFIG_LPC2292 in serial
30521 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
30523 commit 3e954beb614b5b190d7f4f4c3b641437a0132e35
30524 Author: Stefan Roese <sr@denx.de>
30525 Date: Tue Sep 11 14:12:55 2007 +0200
30527 ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)
30529 Signed-off-by: Stefan Roese <sr@denx.de>
30531 commit 1487adbdcf9594bb2eb686325a6f9540dad1b70a
30532 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
30533 Date: Wed Sep 26 16:35:54 2007 -0500
30535 85xx io out functions need sync after write.
30537 This fixes the mc146818 rtc_read/write functions for 85xx.
30539 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
30541 commit 0d38effc6e359e6b1b0c78d66e8bc1a4dc15a2ae
30542 Author: Grant Likely <grant.likely@secretlab.ca>
30543 Date: Tue Sep 25 15:48:05 2007 -0600
30545 Fpga: fix incorrect test of CFG_FPGA_XILINX macro
30547 CFG_FPGA_XILINX is a bit value used to test against the value in
30548 CONFIG_FPGA. Testing for a value will always return TRUE. I don't
30549 think that is the intention in this code.
30551 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30553 commit 853643d8cf2ca80cb2e25c53ad5dc580abafe166
30554 Author: Michal Simek <monstr@monstr.eu>
30555 Date: Mon Sep 24 00:41:30 2007 +0200
30557 [FIX] change command handling and removing code violation
30559 commit f240356507038e5ce55e8a24cb2607e9eae6d10c
30560 Author: Michal Simek <monstr@monstr.eu>
30561 Date: Mon Sep 24 00:36:06 2007 +0200
30563 [FIX] change sets of commands
30564 because changing of command handling brings
30565 compilation problems
30567 commit cb1bc63b75a232571eb69aa2c8aa919321655845
30568 Author: Michal Simek <monstr@monstr.eu>
30569 Date: Mon Sep 24 00:30:42 2007 +0200
30571 [FIX] Email reparation & Copyright
30572 Both codes are written by myself without any
30575 commit 0731cbae6c2feab93b244d83fd6a43f5cc9bf852
30576 Author: Michal Simek <monstr@monstr.eu>
30577 Date: Mon Sep 24 00:25:11 2007 +0200
30579 [PATCH] Change macro name for UartLite
30580 because PowerPC 405 can use UartLite as console
30582 commit 1c1100d2fcf46b9d11dcf78d6e5aea75e2e8b716
30583 Author: Michal Simek <monstr@monstr.eu>
30584 Date: Mon Sep 24 00:21:19 2007 +0200
30586 [PATCH] Add support for design without interrupt controller
30589 commit 0731933ec8ec45d02ba89b52df673d526873cdde
30590 Author: Michal Simek <monstr@monstr.eu>
30591 Date: Mon Sep 24 00:19:48 2007 +0200
30593 [FIX] resolve problem with cpu without barrel shifter
30595 commit db14d77995ce515b728b178b63f82babe60e3d56
30596 Author: Michal Simek <monstr@monstr.eu>
30597 Date: Mon Sep 24 00:18:46 2007 +0200
30599 [FIX] repair email address
30601 commit 481d4328618804add1f818a6c96296121cd0528e
30602 Author: Michal Simek <monstr@monstr.eu>
30603 Date: Mon Sep 24 00:17:42 2007 +0200
30605 [FIX] repair MFSL commands
30607 commit b90c045f035c3cc9b5d2edaed6048dfb74e40763
30608 Author: Michal Simek <monstr@monstr.eu>
30609 Date: Mon Sep 24 00:08:37 2007 +0200
30611 synchronizition with mainline
30613 commit eda3e1e6619ad0bee94ae4b16c99d88e77e2af13
30614 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30615 Date: Sun Sep 23 02:42:38 2007 +0900
30617 sh: Add support command of ide with sh
30619 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30621 commit d91ea45d15cf8e0987456bd211ffbb650824b6f1
30622 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30623 Date: Sun Sep 23 02:38:42 2007 +0900
30625 sh: Update Makefile
30627 Add support MS7722SE01 to Makefile.
30629 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30631 commit 6c0bbdccd379f5c8702af9e0765294c2fb7472a6
30632 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30633 Date: Sun Sep 23 02:31:13 2007 +0900
30635 sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 board
30637 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30639 commit 047375bfa4c3052fa50a748da7ff89e9dad3b364
30640 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30641 Date: Sun Sep 23 02:19:24 2007 +0900
30643 sh: Update MS7750SE01 platform
30645 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30647 commit 516ad760db3553766267ada01b7d5d727faa4bbd
30648 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30649 Date: Sun Sep 23 02:17:08 2007 +0900
30651 sh: Remove comment out code from include/asm-sh/cpu_sh4.h
30653 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30655 commit b02bad128669e567fce87d8df823b06a0144b8db
30656 Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30657 Date: Sun Sep 23 02:12:30 2007 +0900
30659 sh: Update core code of SuperH.
30661 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
30663 commit 66dcad3a9a53e0766d90e0084123bd8529522fb0
30664 Author: Wolfgang Denk <wd@denx.de>
30665 Date: Thu Sep 20 00:04:14 2007 +0200
30669 Signed-off-by: Wolfgang Denk <wd@denx.de>
30671 commit 135e19bc2773ebca487e9a8371f67e1ba202313a
30672 Author: Wolfgang Denk <wd@denx.de>
30673 Date: Tue Sep 18 21:36:35 2007 +0200
30675 Avoid compiler warning.
30677 Signed-off-by: Wolfgang Denk <wd@denx.de>
30679 commit 8a783a65851bc7421ab69f442261215e21b8891a
30680 Author: Grant Likely <grant.likely@secretlab.ca>
30681 Date: Tue Sep 18 12:24:57 2007 -0600
30683 Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in TQM8540_config
30685 /bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
30686 nulls in a string differently. For example, the following statement:
30687 echo "this is a string\0" > afile
30688 Will produce the following with /bin/bash:
30689 "this is a string\0"
30690 But with /bin/dash, will produce:
30693 Bug fixed by moving the embedded null out of the makefile and into the
30694 config header. Also renamed the macro to avoid usage colision with the same
30695 macro used by other board ports.
30697 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30699 commit f8d3ca7b6fa322ac57e8e831f07dbeea039a9f35
30700 Author: Wolfgang Denk <wd@denx.de>
30701 Date: Tue Sep 18 17:40:27 2007 +0200
30703 MCC200: fix build warning
30705 The MCC200 board config file includes version.h for some customer-
30706 specific setting, which causes warnings with "make depend"; build
30707 version.h before depend.
30709 Signed-off-by: Wolfgang Denk <wd@denx.de>
30711 commit bd86220f58b99d6896198c385fda132f0c980915
30712 Author: Peter Pearse <peter.pearse@arm.com>
30713 Date: Tue Sep 18 13:07:54 2007 +0100
30715 Move coloured led API to status_led.h
30716 Improve indentation in drivers/at45.c
30718 commit e80e585b00fbbab7ad1bf71619741f2c5b029ab7
30719 Author: Eirik Aanonsen <eaa@wprmedical.com>
30720 Date: Tue Sep 18 08:47:20 2007 +0200
30722 Update atstk1002 bootargs.
30724 Updates to atstk1002 U-Boot header file:
30725 - Changed bootargs:
30726 * Set the bootargs for at1002 to point to the SD-card partition instead
30727 * ... of the boot flash.
30728 * Removing the rootfstype since that argument are not needed.
30730 Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
30731 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30733 commit a4f3aab6dfbed6c29367c688bfb8a47eef62c225
30734 Author: Eirik Aanonsen <eaa@wprmedical.com>
30735 Date: Wed Sep 12 13:32:37 2007 +0200
30737 Add some comments to clocks in atstk1002.h
30739 This patch applies some clarifying comments to how the different
30740 clocks are setup according to atstk1002.h Some of the previous
30741 comments where stating wrongful information.
30743 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
30745 commit 97213f32416ead885deafea86774e912ffd60ad0
30746 Author: David Saada <David.Saada@ecitele.com>
30747 Date: Mon Sep 17 17:04:47 2007 +0200
30749 Description: Add NEC's PCI OHCI module ID to the USB OHCI driver
30751 Signed-off-by: David Saada <david.saada@ecitele.com>
30753 commit 30363e98fa470fbecea5e8bc0f1443352754f303
30754 Author: Stefan Roese <sr@denx.de>
30755 Date: Mon Sep 17 08:20:47 2007 +0200
30757 Small whitespace cleanup of OneNAND patch
30759 Signed-off-by: Stefan Roese <sr@denx.de>
30761 commit d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1
30762 Author: Kyungmin Park <kmpark@infradead.org>
30763 Date: Mon Sep 10 17:15:14 2007 +0900
30765 OneNAND support (take #2)
30767 [PATCH 3/3] OneNAND support (take #2)
30769 OneNAND support at U-Boot
30771 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30773 commit 17aa2800457df0c06b41516f46f126712c196219
30774 Author: Kyungmin Park <kmpark@infradead.org>
30775 Date: Mon Sep 10 17:14:34 2007 +0900
30777 OneNAND support (take #2)
30779 [PATCH 2/3] OneNAND support (take #2)
30781 OneNAND support at U-Boot
30783 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30785 commit 916527f4809a7bcd811f1f1daf34af184e31dd8c
30786 Author: Kyungmin Park <kmpark@infradead.org>
30787 Date: Mon Sep 10 17:13:49 2007 +0900
30789 OneNAND support (take #2)
30791 [PATCH 1/3] OneNAND support (take #2)
30793 OneNAND support at U-Boot
30795 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
30797 commit b49c90df6e7cfcfb8b862b8bbf8448dff5eed9a5
30798 Author: Michal Simek <monstr@monstr.eu>
30799 Date: Sun Sep 16 20:51:57 2007 +0200
30801 [FIX] remove files form repository
30803 commit 67c31036acaaaa992fc346cc89db0909a7e733c4
30804 Author: Wolfgang Denk <wd@denx.de>
30805 Date: Sun Sep 16 17:10:04 2007 +0200
30807 TQM8xx[LM]: Fix broken environment alignment.
30809 With recent toolchains, the environment sectors were no longer aligned to
30810 sector boundaries. The reason was a combination of two bugs:
30812 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
30813 for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
30814 this gets defined, is not included here (and cannot be included
30815 without causing lots of problems).
30817 Added a new #define CFG_USE_PPCENV for all boards which really
30818 want to put the environment is a ".ppcenv" section.
30820 2) The linker scripts just include environment.o, silently assuming
30821 that the objects in that file are really in the order in which
30822 they are coded in the C file, i. e. "environment" first, then
30823 "redundand_environment", and "env_size" last. However, current
30824 toolchains (GCC-4.x) reorder the objects, causing the environment
30825 data not to start on a flash sector boundary:
30827 Instead of: we got:
30829 40008000 T environment 40008000 T env_size
30830 4000c000 T redundand_environment 40008004 T redundand_environment
30831 40010000 T env_size 4000c004 T environment
30833 Note: this patch fixes just the first part, and cures the alignment
30834 problem by making sure that "env_size" gets placed correctly. However,
30835 we still have a potential issue because primary and redundant
30836 environment sectors are actually swapped, i. e. we have now:
30838 40008000 T redundand_environment
30839 4000c000 T environment
30840 40010000 T env_size
30842 This shall be fixed in the next version.
30844 Signed-off-by: Wolfgang Denk <wd@denx.de>
30846 commit eb6da8050797c204c9d010548424186c7ce32fc1
30847 Author: Wolfgang Denk <wd@denx.de>
30848 Date: Sun Sep 16 02:39:35 2007 +0200
30850 TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels
30852 Signed-off-by: Wolfgang Denk <wd@denx.de>
30854 commit cd2d1602c54cc6957bdef3872272a4b264893960
30855 Author: urwithsughosh@gmail.com <urwithsughosh@gmail.com>
30856 Date: Mon Sep 10 14:54:56 2007 -0400
30860 Fixup for the break statement in wrong place.
30862 [Patch by urwithsughosh@gmail.com]
30863 Acked-by: Andy Fleming <afleming@freescale.com>
30864 Signed-off-by: Wolfgang Denk <wd@denx.de>
30866 commit 5bd7fe9aeb76906371f40b8fd07613f10922e3e7
30867 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30868 Date: Tue Sep 11 17:04:00 2007 +0200
30870 Fix do_div() usage in nand process output
30872 Fix usage of do_div() in nand erase|read|write process output.
30874 The last patch to nand_util.c introduced do_div() instead of libgcc's
30875 implementation. But do_div() returns the quotient in its first
30876 macro parameter and not as result.
30878 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30880 commit c750d2e6692a000a82f29de7bf24e3dc21239161
30881 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30882 Date: Wed Sep 12 12:36:53 2007 +0200
30884 NAND: Add CFG_NAND_QUIET option
30886 This config option sets the default for the progress information
30887 output behavior that can also be configured through the 'quiet'
30888 environment variable.
30890 The legacy NAND code does not print the current progress info
30891 on the console. So this option is for backward compatibility for
30892 units that are in the field and where setting the quiet variable
30893 is not an option. With CFG_NAND_QUIET set to '1' the console
30894 progress info is turned off. This can still be overwritten
30895 through the environment variable.
30897 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
30899 commit dcb88630290d2bcd803386dd4c2be73142994c4f
30900 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
30901 Date: Thu Sep 13 16:06:05 2007 -0700
30903 ColdFire: fix build error becasue of bad type of mii_init()
30905 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
30907 commit 314d5b6ce52a4ed19dd295d1364e246c5e605017
30908 Author: Liew Tsi Chung-r5aahp <Tsi-chung.Liew@freescale.com>
30909 Date: Thu Sep 13 16:04:05 2007 -0700
30911 ColdFire: Fix build error caused by pixis.c
30913 Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS.
30915 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
30917 commit e21659e30660a1377c42af135a6114efe39801d9
30918 Author: Sam Sparks <SSparks@twacs.com>
30919 Date: Fri Sep 14 11:14:42 2007 -0600
30921 Update MPC8349ITX*_config to place config.tmp in right place.
30923 MPC834ITX*_config does not store config.tmp at the correct locatation,
30924 causing MPC8349ITXGP to have the wrong TEXT_BASE.
30926 Signed-off-by: Sam Sparks <SSparks@twacs.com>
30927 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30929 commit 1218abf1b5817a39a82399b4b928b00750575bda
30930 Author: Wolfgang Denk <wd@denx.de>
30931 Date: Sat Sep 15 20:48:41 2007 +0200
30933 Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global
30935 Signed-off-by: Wolfgang Denk <wd@denx.de>
30937 commit 66b3f24d665be678a9dbb125b1e84185400f63b5
30938 Author: Dirk Behme <dirk.behme@googlemail.com>
30939 Date: Sat Sep 15 11:55:42 2007 +0200
30941 Make DECLARE_GLOBAL_DATA_PTR global for DaVinci
30943 As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not
30946 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
30948 [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
30950 commit 991b089d1ce5ad945725e3657a8f106dfa02a38e
30951 Author: Michal Simek <monstr@monstr.eu>
30952 Date: Sat Sep 15 00:03:35 2007 +0200
30954 Synchronize with U-BOOT mainline
30956 commit d7fee32b7e61fe11c64e371cde79faa4768e8350
30957 Author: Sam Sparks <SSparks@twacs.com>
30958 Date: Fri Sep 14 11:14:42 2007 -0600
30960 Update MPC8349ITX*_config to place config.tmp in right place.
30962 MPC834ITX*_config does not store config.tmp at the correct locatation,
30963 causing MPC8349ITXGP to have the wrong TEXT_BASE.
30965 Signed-off-by: Sam Sparks <SSparks@twacs.com>
30966 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
30967 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
30969 commit 6e7b7b6ea1b6d04dbe96242eb6a0c1c664c98e8c
30970 Author: Bartlomiej Sieka <tur@semihalf.com>
30971 Date: Thu Sep 13 18:21:48 2007 +0200
30973 cm5200: Fix a typo introduced by afaac86fe2948ac84cd9a12bbed883b3c683e7d9
30975 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
30977 commit e1f601b572db5de9aa81a0b77c68a86994fe24c4
30978 Author: Bartlomiej Sieka <tur@semihalf.com>
30979 Date: Thu Sep 13 16:33:59 2007 +0200
30981 tqm5200: Restore customary env. variable boot commands for powerpc kernels
30983 - update default definitions of kernel_addr and fdt_addr env. variables
30984 - make arch/powerpc booting the default scenario
30985 - update MTD partition layout to match the above
30987 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
30989 commit f34024d4a328e6edd906456da98d2c537155c4f7
30990 Author: Wolfgang Denk <wd@denx.de>
30991 Date: Wed Sep 12 00:48:57 2007 +0200
30993 Fix memory corruption problem on STX GP3 SSA Board.
30995 Signed-off-by: Wolfgang Denk <wd@denx.de>
30997 commit d94c79e47011af5e8dd10ed6163c09b4cfc743cc
30998 Author: Peter Pearse <peter.pearse@arm.com>
30999 Date: Tue Sep 11 15:35:01 2007 +0100
31003 commit 38ad82da0c1180ecdeb212a8f4245e945bcc546e
31004 Author: Grzegorz Bernacki <gjb@semihalf.com>
31005 Date: Tue Sep 11 15:42:11 2007 +0200
31007 [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow u-boot to
31008 scan on second pci bus.
31010 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31012 commit 6c2f4f388e8181655ea8b69343ea00b68aa6e8d0
31013 Author: Grzegorz Bernacki <gjb@semihalf.com>
31014 Date: Tue Sep 11 12:57:52 2007 +0200
31016 [ppc4xx] Individual handling of sdram.c for bamboo_nand build
31018 Bamboo has a file sdram.c which needs special treatment when building in
31019 separate directory. It has to be linked to build directory otherwise it is
31022 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31024 commit d45963854eff39d575124d859419bb4953ce2c87
31025 Author: Michal Simek <monstr@monstr.eu>
31026 Date: Tue Sep 11 00:37:04 2007 +0200
31028 [FIX] Microblaze ML401 - repare FLASH handling
31030 commit 38c1ef728d19950414a8ab1ccfc53767848fa346
31031 Author: Sean MCGOOGAN <sean.mcgoogan@st.com>
31032 Date: Mon Sep 10 16:55:59 2007 +0100
31034 Allocate CPU Architecture Code for STMicroelectronics' ST200.
31036 Signed-off-by: Sean McGoogan <Sean.McGoogan@st.com>
31037 ---------------------------------------------------
31039 commit 754bac48156f8958d8f6a53a51eda88ab5758929
31040 Author: Wolfgang Denk <wd@denx.de>
31041 Date: Mon Sep 10 20:42:31 2007 +0200
31043 Update version to match current state.
31045 Signed-off-by: Wolfgang Denk <wd@denx.de>
31047 commit 7a888d6b3c32a126dbb504ef146bb4c26574ca7b
31048 Author: Grzegorz Bernacki <gjb@semihalf.com>
31049 Date: Mon Sep 10 17:39:08 2007 +0200
31051 [MPC512x] Streamline frame handling in the FEC driver
31053 - convert frame size settings to be derived from a single base
31054 - set frame size to the recommended default value
31056 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31058 commit e251e00d0db4b36d1d2b7e38fec43a7296b529a2
31059 Author: Kyungmin Park <kmpark@infradead.org>
31060 Date: Mon Sep 10 11:34:00 2007 +0900
31062 Remove compiler warning: target CPU does not support interworking
31064 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
31066 commit 1d9e31e04911a6bb7cc66dd91132c699101c32e2
31067 Author: Wolfgang Denk <wd@denx.de>
31068 Date: Sun Sep 9 21:21:33 2007 +0200
31070 Fix compile error in spc1920 config.
31072 Signed-off-by: Markus Klotzbücher <mk@denx.de>
31073 Signed-off-by: Wolfgang Denk <wd@denx.de>
31075 commit a7d7eca791a37f452c9da10fef4b31dd7aa9a622
31076 Author: Grant Likely <grant.likely@secretlab.ca>
31077 Date: Fri Sep 7 09:25:07 2007 -0600
31079 Bugfix: make bootm+libfdt compile on boards with no flash
31081 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31083 commit 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778
31084 Author: Grzegorz Bernacki <gjb@semihalf.com>
31085 Date: Fri Sep 7 18:35:37 2007 +0200
31087 [PPC440SPe] PCIe environment settings for Katmai and Yucca
31089 - 'pciconfighost' is set by default in order to be able to scan bridges
31090 behind the primary host/PCIe
31092 - 'pciscandelay' env variable is recognized to allow for user-controlled
31093 delay before the PCIe bus enumeration; some peripheral devices require a
31094 significant delay before they can be scanned (e.g. LSI8408E); without the
31095 delay they are not detected
31097 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31099 commit 7f1913938984ef6c6a46cb53e003719196d9c5de
31100 Author: Grzegorz Bernacki <gjb@semihalf.com>
31101 Date: Fri Sep 7 18:20:23 2007 +0200
31103 [PPC440SPe] Improve PCIe configuration space access
31105 - correct configuration space mapping
31106 - correct bus numbering
31107 - better access to config space
31109 Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
31110 first device on the first bus. We now allow to configure up to 16 buses;
31111 also, scanning for devices behind the PCIe-PCIe bridge is supported, so
31112 peripheral devices farther in hierarchy can be identified.
31114 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31116 commit 15ee4734e4e08003d73d9ead3ca80e2a0672e427
31117 Author: Grzegorz Bernacki <gjb@semihalf.com>
31118 Date: Fri Sep 7 17:46:18 2007 +0200
31120 [PPC440SPe] Convert machine check exceptions handling
31122 Convert using fixup mechanism to suppressing MCK for the duration of config
31123 read/write transaction: while fixups work fine with the case of a precise
31124 exception, we identified a major drawback with this approach when there's
31125 an imprecise case. In this scenario there is the following race condition:
31126 the fixup is (by design) set to catch the instruction following the one
31127 actually causing the exception; if an interrupt (e.g. decrementer) happens
31128 between those two instructions, the ISR code is executed before the fixup
31129 handler the machine check is no longer protected by the fixup handler as it
31130 appears as within the ISR code. In consequence the fixup approach is being
31131 phased out and replaced with explicit suppressing of MCK during a PCIe
31132 config read/write cycle.
31134 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31136 commit ff7640c9ead8806b5d827f2b29f9cb2632add729
31137 Author: Wolfgang Denk <wd@denx.de>
31138 Date: Fri Sep 7 17:43:36 2007 +0200
31140 Fix typo in MAKEALL script.
31142 Signed-off-by: Wolfgang Denk <wd@denx.de>
31144 commit 08e2e5fcd2e06670b62e1680a3934c0e55c72810
31145 Author: Grzegorz Bernacki <gjb@semihalf.com>
31146 Date: Fri Sep 7 17:09:21 2007 +0200
31148 [MPC512x] Proper handling of larger frames in the FEC driver
31150 When frame larger than local RX buffer is received, it is split and handled
31151 by two buffer descriptors. Prior to this patch the FEC driver discarded
31152 contents of a buffer descriptor without the 'LAST' bit set, so the first
31153 part of the frame was lost in case of larger frames. This fix allows to
31154 safely combine the two pieces into the whole frame.
31156 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
31158 commit 8d17979d0359492a822a0a409d26e3a3549b4cd4
31159 Author: Rafal Jaworowski <raj@semihalf.com>
31160 Date: Fri Sep 7 17:05:36 2007 +0200
31162 [MPC512x] Correct fixup relocation
31164 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
31166 commit a89cbbd27a60e6740772000fd0688ffba1c2576a
31167 Author: Wolfgang Denk <wd@denx.de>
31168 Date: Fri Sep 7 01:21:25 2007 +0200
31170 Update CHANGELOG, minor coding style cleanup.
31172 commit 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3
31173 Author: stefano babic <sbabic@denx.de>
31174 Date: Thu Aug 30 23:01:49 2007 +0200
31176 PXA270: Added support for TrizepsIV board.
31178 This patch add support for the Trizeps IV module (520Mhz).
31180 Signed-off-by: Stefano Babic <sbabic@denx.de>
31182 commit 80172c6181c912fbb34ea3ba0c22b232b419b47f
31183 Author: stefano babic <sbabic@denx.de>
31184 Date: Thu Aug 30 22:57:04 2007 +0200
31186 PXA270: Add support for multiple serial ports.
31188 This patch adds support for multiple serial ports to the PXA target.
31189 FFUART, BTUART and STUART are supported.
31191 Signed-off-by: Stefano Babic <sbabic@denx.de>
31193 commit 28bb3f72c687ac6b2eb076b01dd21a5fd657d45e
31194 Author: stefano babic <sbabic@denx.de>
31195 Date: Thu Aug 30 22:48:47 2007 +0200
31197 PXA270: fix compile issue (invalid lvalue)
31199 Code is broken for PXA270 due to "invalid lvalue in assignment".
31201 This patch fix it in pxa-regs.h
31203 Signed-off-by: Stefano Babic <sbabic@denx.de>
31205 commit 1d2ca446e1a731df420206d04fe278c27ea6b8e8
31206 Author: Jason Jin <Jason.jin@freescale.com>
31207 Date: Thu Aug 30 18:19:05 2007 +0800
31209 Add BUILD_DIR support for bios emulator.
31211 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
31213 commit b4d8a55145442f136982634862341a3e02002bda
31214 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31215 Date: Fri Aug 31 14:41:51 2007 +0900
31217 [MIPS] Remove inline asm string functions
31219 Stop using inline string functions on MIPS as other ARCHs do so,
31220 since the optimized inline asm versions are not small.
31222 This change is triggered by a following MIPS build error:
31223 common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init':
31224 common/exports.c:32: undefined reference to `strcmp'
31225 make: *** [u-boot] Error 1
31227 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31229 commit 8ea2c4e54833deaebc24c3ca6b7f21353c25b0f5
31230 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31231 Date: Fri Aug 31 14:41:45 2007 +0900
31233 [MIPS] Update asm string header
31235 This patches contains several bugfixes and cleanups in the latest upstream:
31237 - Don't include linux/config.h
31238 - Remove buggy inline version of memscan.
31239 - Merge with Linux 2.6.11-rc3.
31240 - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4.
31241 - Goodbye mips64. 31704 lines of code bite the dust.
31242 - Replace extern inline with static inline.
31243 - Fix return value of strncpy.
31244 - Remove a bunch more "$1" clobbers.
31246 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31248 commit 5b729fb3bd98f49855d6bfc657c3fbae95f2adc2
31249 Author: Bartlomiej Sieka <tur@semihalf.com>
31250 Date: Tue Sep 4 17:31:22 2007 +0200
31252 Fix do_bootm_linux() so that multi-file images with FDT blob boot.
31254 Fix incorrect blob address calculation in do_bootm_linux() that prevents
31255 booting the kernel from a multi-file image (kernel + initrd + blob).
31257 Also, make minor updates to the U-Boot's output and to the coding style.
31259 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
31261 commit 041a2554ad619e80dce520c1a33210affcb6a3f2
31262 Author: Gary Jennejohn <gary.jennejohn@freenet.de>
31263 Date: Fri Aug 31 14:29:04 2007 +0200
31265 Add support for Sil680 IDE controller.
31267 o add drivers/sil680.c to support the Sil680 IDE-controller.
31268 o drivers/Makefile: add sil680.o.
31270 Signed-off-by: Gary Jennejohn <garyj@denx.de>
31272 commit e79021223bc339df655e360645a52c457a74b067
31273 Author: Grant Likely <grant.likely@secretlab.ca>
31274 Date: Thu Sep 6 09:47:40 2007 -0600
31276 bootm/fdt: Only process the fdt if an fdt address was provided
31278 Boards with CONFIG_OF_LIBFDT enabled are not able to boot old-style
31279 kernels using the board info structure (instead of passing a device tree)
31280 This change allows the old style booting to be used if the fdt argument
31281 was not passed to 'bootm'.
31283 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31284 Acked-by: Kim Phillips <kim.phillips@freescale.com>
31286 commit cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43
31287 Author: Grant Likely <grant.likely@secretlab.ca>
31288 Date: Thu Sep 6 09:46:23 2007 -0600
31290 Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT
31292 Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200
31294 Tested on: lite5200b
31296 Note: the fixup functions have not been moved to a common place. This
31297 patch is targeted for immediate merging as in solves a build issue, but
31298 the final name/location of the fixups is still subject to debate. I
31299 propose to merge this now, and move the fixups in the next merge window
31300 to be usable by all targets.
31302 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31304 commit 41bb76e941929f54a73206fb132f7a4c275543a3
31305 Author: Grant Likely <grant.likely@secretlab.ca>
31306 Date: Thu Sep 6 09:46:17 2007 -0600
31308 libfdt: add convenience function fdt_find_and_setprop()
31310 Given the path to a node, fdt_find_and_setprop() allows a property value
31311 to be set directly.
31313 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31315 commit 80767a6cead9990d9e77e62be947843c2c72f469
31316 Author: Peter Pearse <peter.pearse@arm.com>
31317 Date: Wed Sep 5 16:04:41 2007 +0100
31319 Changed API name to coloured_led.h
31320 Removed code using deprecated ifdef CONFIG_BOOTBINFUNC
31321 Tidied other cpu/arm920t/start.S code
31323 commit 56a9270521baaa00e12639a978302a67f61ef060
31324 Author: Kumar Gala <galak@kernel.crashing.org>
31325 Date: Thu Aug 30 16:18:18 2007 -0500
31327 Fix ULI RTC support on MPC8544 DS
31329 The RTC on the M1575 ULI chipset requires a dummy read before
31330 we are able to talk to the RTC. We accomplish this by adding a
31331 second memory region to the PHB the ULI is on and read from it.
31333 The second region is added to maintain compatiabilty with Linux's
31334 view of the PCI memory map.
31336 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
31338 commit f75e89e9b5714db2b0e80074071dfbdd6f59488a
31339 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31340 Date: Thu Aug 30 01:58:48 2007 -0500
31342 ft_board_setup update 85xx/86xx of pci/pcie bus-range property.
31344 pcie is now differentiated from pci. Add 8641 bus-range updates.
31346 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31348 commit 9f5c3d3720e777a572dcdc8af2008b44c7243885
31349 Author: Peter Pearse <peter.pearse@arm.com>
31350 Date: Tue Sep 4 16:18:38 2007 +0100
31352 Add coloured led interface for ARM boards.
31353 Use it in cpu/arm920t/start.S to indicate U-Boot code has been entered.
31355 commit 7462fe0d5a9d40cde083fb1a3cd73911996b5ecb
31356 Author: Peter Pearse <peter.pearse@arm.com>
31357 Date: Tue Sep 4 14:49:28 2007 +0100
31359 Move include/led.h to board/at91rm9200dk
31361 commit 6e4bf9b24e57c15abc6542e685d06380bc64af27
31362 Author: Peter Pearse <peter.pearse@arm.com>
31363 Date: Tue Sep 4 14:25:51 2007 +0100
31365 Ran Lindent on drivers/at45.c
31367 commit 557ab89d294f08dd532f21d19861b40093200a33
31368 Author: Peter Pearse <peter.pearse@arm.com>
31369 Date: Tue Sep 4 14:23:50 2007 +0100
31371 Rename CONFIG_CMD_MUX to CONFIG_CMD_AT91_SPIMUX
31373 commit 81b73dec16fd1227369a191e725e10044a9d56b8
31374 Author: Gary Jennejohn <garyj@denx.de>
31375 Date: Fri Aug 31 15:21:46 2007 +0200
31377 ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia
31379 The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
31380 set to non-zero, because it doesn't support MRM (memory-read-
31381 multiple) correctly. We now added the possibility to configure
31382 this register in the board config file, so that the default value
31383 of 8 can be overridden.
31385 Here the details of this patch:
31387 o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
31388 board-specific settings. As an example the sequoia board requires 0.
31389 Idea from Stefan Roese <sr@denx.de>.
31390 o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
31391 PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
31392 o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
31393 CFG_PCI_CACHE_LINE_SIZE to 0.
31395 Signed-off-by: Gary Jennejohn <garyj@denx.de>
31396 Signed-off-by: Stefan Roese <sr@denx.de>
31398 commit 60174746c668b309378a91488dded898e9553eae
31399 Author: Wolfgang Denk <wd@denx.de>
31400 Date: Fri Aug 31 10:01:51 2007 +0200
31402 Fix TFTP OACK code for short packets.
31404 The old code had a loop limit overflow bug which caused a semi-
31405 infinite loop for small packets, because in "i<len-8", "i" was signed,
31406 but "len" was unsigned, and "len-8" became a huge number for small
31409 This is a workaround which replaces broken commit 8f1bc284.
31411 Signed-off-by: Wolfgang Denk <wd@denx.de>
31413 commit 696dd1307cd8e73a10e9bb3c51731bfd6f837bee
31414 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31415 Date: Thu Aug 30 15:03:05 2007 +0200
31417 Reduce BOOTDELAY variable to 1 second by default for STK1002
31419 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31420 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31422 commit c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a
31423 Author: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31424 Date: Thu Aug 30 15:03:04 2007 +0200
31426 Remove double quotation marks around MAC address for STK1002
31428 Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
31429 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31431 commit ff13ac8c7bbebb238e339592de765c546dba1073
31432 Author: Wolfgang Denk <wd@denx.de>
31433 Date: Thu Aug 30 14:42:15 2007 +0200
31435 Backout commit 8f1bc284 as it causes TFTP to fail.
31437 Signed-off-by: Wolfgang Denk <wd@denx.de>
31439 commit 1900fbf255acba8b94fb442a16408ea85a1d46a6
31440 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31441 Date: Thu Aug 30 02:26:17 2007 -0500
31443 Revert "Fix MPC8544DS PCIe3 scsi."
31445 This reverts commit 9468e680.
31446 Commit 16e23c3f5da removing allocation of PCSRBAR is sufficient.
31448 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31450 commit 8f1bc28408ded213418d9bc0780c7d8fb8a03774
31451 Author: Grant Likely <grant.likely@secretlab.ca>
31452 Date: Wed Aug 29 18:26:24 2007 -0600
31454 tftp: don't implicity trust the format of recevied packets
31456 The TFTP OACK code trusts that the incoming packet is formated as
31457 ASCII text and can be processed by string functions. It also has a
31458 loop limit overflow bug where if the packet length is less than 8, it
31459 ends up looping over *all* of memory to find the 'blksize' string.
31461 This patch solves the problem by forcing the packet to be null
31462 terminated and using strstr() to search for the sub string.
31464 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
31466 commit 04625764cc93ce8a61625ac19d7fe2a2ceee8143
31467 Author: Stefan Roese <sr@denx.de>
31468 Date: Wed Aug 29 16:31:18 2007 +0200
31470 ppc4xx: Change lwmon5 default environment to support Linux RTC
31472 The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
31473 to supply the RTC I2C address as bootline parameter. This patch
31474 adds support for this rtc probing parameter to the bootargs:
31476 "rtc-pcf8563.probe=0,0x51"
31478 Signed-off-by: Stefan Roese <sr@denx.de>
31480 commit 2602a5c40ae37ab965a4e240854fdaffb51328a4
31481 Author: Kim Phillips <kim.phillips@freescale.com>
31482 Date: Wed Aug 29 09:06:05 2007 -0500
31484 sbc8641: remove unused OF_FLAT_TREE_MAX_SIZE
31486 this had slipped through the cracks, since the sbc board was added
31487 after I wrote the original patch to remove all these symbols, and
31488 before it was merged.
31490 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31492 commit c5bded3c88e48ae648a75d357dc81a8255fa81f1
31493 Author: Wolfgang Denk <wd@denx.de>
31494 Date: Wed Aug 29 14:05:30 2007 +0200
31496 Add mii_init() prototype
31498 to get rid of a *lot* of compiler warnings.
31500 Signed-off-by: Wolfgang Denk <wd@denx.de>
31502 commit 2d1f23aa1e74e4a8f8ffa67f246eb98c522dfd7f
31503 Author: Wolfgang Denk <wd@denx.de>
31504 Date: Wed Aug 29 13:35:03 2007 +0200
31506 Disable network support on cmi_mpc5xx board
31508 ..because it caused compiler errors and there seems to be no
31509 board maintainer to take care of this.
31511 Signed-off-by: Wolfgang Denk <wd@denx.de>
31513 commit 9468e6804b7e25b0f6f52e53f47bce3175400a16
31514 Author: Kumar Gala <galak@kernel.crashing.org>
31515 Date: Mon Aug 20 09:44:00 2007 -0500
31517 Fix MPC8544DS PCIe3 scsi.
31519 <ed.swarthout@freescale.com>
31521 The problem is pciauto_setup_device() getting called from fsl_pci_init.c
31522 is allocating memory space it doesn't need.
31524 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
31525 Signed-off-by: Andy Fleming <afleming@freescale.com>
31527 commit 4bf4abb8a4e9955556b120a1aafa30c03e74032a
31528 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31529 Date: Tue Aug 21 09:38:59 2007 -0500
31533 Restore CONFIG_EXTRA_ENV_SETTINGS definition which contains the
31534 correct consoledev needed for linux boot.
31535 Standardize on fdt{file,addr} var to hold dtb file name.
31537 Set PCI inbound memory region from CFG_MEMORY_{BUS,PHYS}.
31539 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
31541 commit 7a1ac419fa0d2d23ddd08bd61d16896a9f33c933
31542 Author: Haiying Wang <Haiying.Wang@freescale.com>
31543 Date: Thu Aug 23 15:20:54 2007 -0400
31545 Enable L2 cache for MPC8568MDS board
31547 The L2 cache size is 512KB for 8568, print out the correct informaiton.
31549 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
31551 commit 94c47fdaf14cb29fa3fb4d4da2efdd96c803b46b
31552 Author: Jason Jin <Jason.jin@freescale.com>
31553 Date: Wed Aug 22 17:54:49 2007 +0800
31555 Remove the bios emulator binary files from MAI board
31557 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
31559 commit 7608d75f9c87c9eb5b3a43219d0506d3e979a13f
31560 Author: Kim Phillips <kim.phillips@freescale.com>
31561 Date: Tue Aug 21 17:00:17 2007 -0500
31563 support board vendor-common makefiles
31565 if a board/$(VENDOR)/common/Makefile exists, build it.
31567 also add the first such case, board/freescale/common/Makefile, to
31568 handle building board-shared EEPROM, PIXIS, and MDS-PIB code, as
31569 dictated by board configuration.
31571 thusly get rid of alternate build dir errors such as:
31573 FATAL: can't create /work/wd/tmp/u-boot-ppc/board/freescale/mpc8360emds/../common/pq-mds-pib.o: No such file or directory
31575 by putting the common/ mkdir command in its proper place (the common
31576 Makefile). Common bits from existing individual board Makefiles have
31579 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31581 commit ef8f20752712dc1cdbd86f47e3bd6e35f81c83fd
31582 Author: stefano babic <sbabic@denx.de>
31583 Date: Tue Aug 21 15:52:33 2007 +0200
31585 Fix: TFTP is not working on little endian systems
31587 TFTP does not work anymore after multicast tftp
31588 patch was applied on little endian systems.
31591 Signed-off-by: Stefano Babic <sbabic@denx.de>
31593 commit 5f470948570526e9186f053a3003da7719604e90
31594 Author: stefano babic <sbabic@denx.de>
31595 Date: Tue Aug 21 15:50:33 2007 +0200
31597 Fix MAC address setting in DM9000 driver.
31599 The logic to check if there is a correct MAC address in the DM9000
31600 EEPROM, added in the last patch, is wrong. Now the MAC address is
31601 always taken from the environment, even if a suitable MAC is present
31604 Signed-off-by: Stefano Babic <sbabic@denx.de>
31606 commit 4a8527ef086ec7c89f40674ef024ae6f988a614a
31607 Author: Martin Krause <martin.krause@tqs.de>
31608 Date: Tue Aug 21 12:40:34 2007 +0200
31610 MPC5xxx: fix some compiler warnings in USB code
31612 Fix the following warnings:
31613 - usb.c:xx: warning: function declaration isn't a prototype
31614 - usb_ohci.c:xxx: warning: passing argument 1 of '__fswab32' makes integer
31615 from pointer wihtout a cast
31617 Signed-off-by: Martin Krause <martin.krase@tqs.de>
31619 commit 16e23c3f5dab6937f5109365416808c7f15c122b
31620 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
31621 Date: Mon Aug 20 23:55:33 2007 -0500
31623 fsl_pci_init - Remove self PCSRBAR allocation
31625 CPU physical address space was being wasted by allocating a
31626 PCSRBAR PCI inbound region to it's memory space.
31628 As a rule, PCSRBAR should be left alone since it does not affect
31629 transactions from self and other masters may have changed it.
31631 Signed-off-by: Ed Swarthout <ed.swarthout@freescale.com>
31633 commit 0e700ce03a23bb1921149bc77008ace7103d5289
31634 Author: Martin Krause <martin.krause@tqs.de>
31635 Date: Mon Aug 20 13:56:47 2007 +0200
31637 Fix compiler warning in include/s3c2410.h
31639 This patch fixes the "type qualifiers ignored on fuction return tpye"
31640 warning for include/s3c2410.h
31642 Signed-off-by: Martin Krause <martin.krause@tqs.de>
31644 commit 9bb8b209ed2058a5756ecbeb544c067e44a42aea
31645 Author: Dirk Behme <dirk.behme@googlemail.com>
31646 Date: Mon Aug 20 07:09:05 2007 +0200
31648 Fix compilation error for omap2420h4_config.
31650 omap2420h4 switched to cfi, so remove old (already disabled) flash.c
31651 and flash_probe() calls in env_flash.c.
31653 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
31655 commit 3bb342fc85d79dbb6b8c2039e7cdcddc82b8d90f
31656 Author: Kim Phillips <kim.phillips@freescale.com>
31657 Date: Fri Aug 10 14:34:14 2007 -0500
31659 fdt: remove unused OF_FLAT_TREE_MAX_SIZE references
31661 and make some minor corrections to the FDT part of the README.
31663 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31665 commit 6af2eeb1e99c2dcc584d4c5ab7fcae30a325f4de
31666 Author: Wolfgang Denk <wd@denx.de>
31667 Date: Wed Aug 29 01:32:05 2007 +0200
31669 Minor coding style cleanup.
31671 Signed-off-by: Wolfgang Denk <wd@denx.de>
31673 commit a861558c65f65f1cf1302f3a35e9db7686b9e1a3
31674 Author: Heiko Schocher <hs@pollux.denx.de>
31675 Date: Tue Aug 28 17:40:33 2007 +0200
31677 [UC101] Fix: if no CF in the board, U-Boot resets sometimes.
31679 Signed-off-by: Heiko Schocher <hs@denx.de>
31681 commit f98984cb194bb34dbe1db9429d3b51133af30d07
31682 Author: Heiko Schocher <hs@pollux.denx.de>
31683 Date: Tue Aug 28 17:39:14 2007 +0200
31685 IDE: - make ide_inb () and ide_outb () "weak", so boards can
31686 define there own I/O functions.
31687 (Needed for the pcs440ep board).
31688 - The default I/O Functions are again 8 Bit accesses.
31689 - Added CONFIG_CMD_IDE for the pcs440ep Board.
31691 Signed-off-by: Heiko Schocher <hs@denx.de>
31693 commit 2c05fd125744981e5f2828d24e66ccc20a77d25d
31694 Author: Semih Hazar <semih.hazar@indefia.com>
31695 Date: Mon Aug 20 19:00:01 2007 +0300
31697 AVR32: Change prototype of memset
31699 Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
31700 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
31702 commit 9c02defc29b57945b600714cf61ddfd02b02fb14
31703 Author: Yuri Tikhonov <yur@emcraft.com>
31704 Date: Sat Aug 25 05:07:16 2007 +0200
31706 POST: limit memory test area to not touch global data anymore
31708 As experienced on lwmon5, on some boards the POST memory test can
31709 corrupt the global data buffer (bd). This patch fixes this issue
31710 by checking and limiting this area.
31712 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
31713 Signed-off-by: Stefan Roese <sr@denx.de>
31715 commit 75e1a84d483e36be10e206e539b028c4889e1158
31716 Author: Stefan Roese <sr@denx.de>
31717 Date: Fri Aug 24 15:41:42 2007 +0200
31719 ppc4xx: Add RTC POST test to lwmon5 board configuration
31721 Since this RTC POST test is taking quite a while to complete
31722 it's only initiated upon special keypress same as the complete
31725 Signed-off-by: Stefan Roese <sr@denx.de>
31727 commit d7bfa620037a6d2210159387571bdf93aa32c162
31728 Author: Stefan Roese <sr@denx.de>
31729 Date: Fri Aug 24 15:19:10 2007 +0200
31731 ppc4xx: Change GPIO signal for watchdog triggering on lwmon5
31733 Signed-off-by: Stefan Roese <sr@denx.de>
31735 commit c25dd8fc25e9ca3695db996a257d9ba4dab414db
31736 Author: Stefan Roese <sr@denx.de>
31737 Date: Thu Aug 23 11:02:37 2007 +0200
31739 ppc4xx: Add support for 2nd I2C EEPROM on lwmon5 board
31741 This patch adds support for the 2nd EEPROM (AT24C128) on the lwmon5
31742 board. Now the "eeprom" command can be used to read/write from/to this
31743 device. Additionally a new command was added "eepromwp" to en-/disable
31744 the write-protect of this 2nd EEPROM.
31746 The 1st EEPROM is not affected by this write-protect command.
31748 Signed-off-by: Stefan Roese <sr@denx.de>
31750 commit c64fb30e4c5976007d56fc1789c7a0666082b536
31751 Author: Stefan Roese <sr@denx.de>
31752 Date: Wed Aug 22 08:56:09 2007 +0200
31754 ppc4xx: Remove unused option CFG_INIT_RAM_OCM
31756 Signed-off-by: Stefan Roese <sr@denx.de>
31758 commit 3ad63878737a5a2b1e60825bf0a7d601d7a695e7
31759 Author: Stefan Roese <sr@denx.de>
31760 Date: Tue Aug 21 16:27:57 2007 +0200
31762 ppc4xx: Add matrix kbd support to lwmon5 board (440EPx based)
31764 This patch adds support for the matrix keyboard on the lwmon5 board.
31765 Since the implementation in the dsPCI is kind of compatible with the
31766 "old" lwmon board, most of the code is copied from the lwmon
31769 Signed-off-by: Stefan Roese <sr@denx.de>
31771 commit 3e66c078003607a7d1d214c15a5f262bc1b4032f
31772 Author: Wolfgang Denk <wd@denx.de>
31773 Date: Sun Aug 19 10:27:34 2007 +0200
31775 Fix some build errors.
31777 Signed-off-by: Wolfgang Denk <wd@denx.de>
31779 commit 05675735ef77dc23b5e0eb782bad1ff477b55e86
31780 Author: Wolfgang Denk <wd@denx.de>
31781 Date: Sat Aug 18 22:00:38 2007 +0200
31785 commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
31786 Author: Kim Phillips <kim.phillips@freescale.com>
31787 Date: Thu Aug 16 22:52:39 2007 -0500
31789 lib_ppc: make board_add_ram_info weak
31791 platforms wishing to display RAM diagnostics in addition to size,
31792 can do so, on one line, in their own board_add_ram_info()
31795 this consequently eliminates CONFIG_ADD_RAM_INFO.
31797 Thanks to Stefan for the hint.
31799 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31801 commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
31802 Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31803 Date: Fri Aug 17 12:43:44 2007 +0900
31805 PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
31807 This patch has been sent on:
31810 Many users of PCI config read routines tend to ignore the function
31811 ret value, and are only concerned about the contents of *val. Based
31812 on this, pci_hose_read_config_{byte,word}_via_dword should initialize
31813 the *val on dword read error.
31815 Without this fix, for example, we'll go on scanning bus with vendor or
31816 header_type uninitialized. This brings many unnecessary config trials.
31818 Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
31820 commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
31821 Author: Stefan Roese <sr@denx.de>
31822 Date: Sat Aug 18 14:37:52 2007 +0200
31824 ColdFire: Fix some remaining problems with CFG_CMD_
31826 Signed-off-by: Stefan Roese <sr@denx.de>
31828 commit 8280f6a1c43247616b68224675188e5ccd124650
31829 Author: Stefan Roese <sr@denx.de>
31830 Date: Sat Aug 18 14:33:02 2007 +0200
31832 Coding style cleanup
31834 Signed-off-by: Stefan Roese <sr@denx.de>
31836 commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
31837 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31838 Date: Thu Aug 16 19:23:50 2007 -0500
31840 ColdFire: Add M5235EVB Platform for MCF523x
31842 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31844 commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
31845 Author: Kim Phillips <kim.phillips@freescale.com>
31846 Date: Fri Aug 17 09:30:00 2007 -0500
31848 mpc83xx: fix typo in DDR2 programming
31850 introduced in the implement board_add_ram_info patch as I was cleaning out the
31851 magic numbers. sorry.
31853 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31855 commit e58fe95784d2514fc9c21028dc59f2b319a35d80
31856 Author: Kim Phillips <kim.phillips@freescale.com>
31857 Date: Thu Aug 16 22:53:09 2007 -0500
31859 mpc83xx: move freescale boards to boards/freescale
31861 includes build fixes.
31863 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31865 commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
31866 Author: Kim Phillips <kim.phillips@freescale.com>
31867 Date: Thu Aug 16 22:52:59 2007 -0500
31869 mpc83xx: suppress unused variable 'val8' warning
31871 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31873 commit bbea46f76f767b919070b4829bf34c86bd223248
31874 Author: Kim Phillips <kim.phillips@freescale.com>
31875 Date: Thu Aug 16 22:52:48 2007 -0500
31877 mpc83xx: implement board_add_ram_info
31879 add board_add_ram_info, to make memory diagnostic output more
31880 consistent. u-boot banner output now looks like:
31882 DRAM: 256 MB (DDR1, 64-bit, ECC on)
31884 and for boards with SDRAM on the local bus, a line such as this is
31887 SDRAM: 64 MB (local bus)
31889 also replaced some magic numbers with their equivalent define names.
31891 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
31893 commit 14778585d1389d86d5846efec29e5fce892680ce
31894 Author: Tony Li <tony.li@freescale.com>
31895 Date: Fri Aug 17 10:35:59 2007 +0800
31897 mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
31899 The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
31900 And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
31902 Signed-off-by Tony Li <tony.li@freescale.com>
31904 commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
31905 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31906 Date: Thu Aug 16 15:05:11 2007 -0500
31908 ColdFire: Add M54455EVB for MCF5445x
31910 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31912 commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
31913 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31914 Date: Thu Aug 16 13:20:50 2007 -0500
31916 ColdFire: Add M5253EVBE platform for MCF52x2
31918 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31920 commit a605aacd8324094199402816cc6d9124aba57b8d
31921 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31922 Date: Thu Aug 16 05:04:31 2007 -0500
31924 ColdFire: Add M5249EVB platform for MCF52x2
31926 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31928 commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
31929 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31930 Date: Wed Aug 15 20:32:06 2007 -0500
31932 ColdFire: Update Freescale MCF52x2 platforms
31934 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31936 commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
31937 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31938 Date: Wed Aug 15 19:55:10 2007 -0500
31940 ColdFire: Update EB+MCF-EV123 platform
31942 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31944 commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
31945 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31946 Date: Wed Aug 15 19:46:38 2007 -0500
31948 ColdFire: update TASREG platform for MCF52x2
31950 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31952 commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
31953 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31954 Date: Wed Aug 15 19:45:51 2007 -0500
31956 ColdFire: update r5200 platform for MCF52x2
31958 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31960 commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
31961 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31962 Date: Wed Aug 15 19:43:20 2007 -0500
31964 ColdFire: idmr platform MCF52x2 update
31966 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31968 commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
31969 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31970 Date: Wed Aug 15 19:41:06 2007 -0500
31972 ColdFire: cobra5272 platform for MCF52x2 update
31974 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31976 commit 56115665b4a64c10c01440c57749b265e0908fa4
31977 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31978 Date: Wed Aug 15 19:38:15 2007 -0500
31980 ColdFire: MCF52x2 Header files update
31982 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31984 commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
31985 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31986 Date: Wed Aug 15 19:21:21 2007 -0500
31988 ColdFire: MCF52x2 update
31990 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31992 commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
31993 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
31994 Date: Wed Aug 15 18:46:11 2007 -0500
31996 ColdFire: MCF5329 update cache
31998 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32000 commit 7171977fb8fd77cfb6676953fa9a05789c450513
32001 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32002 Date: Wed Aug 15 15:40:20 2007 -0500
32004 ColdFire: MCF5329 header file clean up
32006 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32008 commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
32009 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32010 Date: Wed Aug 15 15:39:17 2007 -0500
32012 ColdFire: MCF5329 Update and cleanup
32014 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
32016 commit 10327dc5541f947c0cf7e31fef86c4706169607a
32017 Author: Andy Fleming <afleming@freescale.com>
32018 Date: Thu Aug 16 16:35:02 2007 -0500
32020 Add CONFIG_HAS_ETH0 to all boards with TSEC
32022 The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
32023 to update TSEC1's device-tree node, so we need to add it
32024 to all the boards with TSECs. Do this for 83xx and 86xx, too,
32025 since they will eventually do something similar.
32027 Signed-off-by: Andy Fleming <afleming@freescale.com>
32029 commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
32030 Author: Kumar Gala <galak@kernel.crashing.org>
32031 Date: Thu Aug 16 15:05:04 2007 -0500
32033 Update MPC8544 DS PCI memory map
32035 The PCIe bus that the ULI M1575 is connected to has no possible way of
32036 needing more than the fixed amount of IO & Memory space needed by the ULI.
32038 So make it use far less IO & memory space and have it use the shared LAW. This
32039 free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
32042 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32044 commit ea5877e31ed63ade948fd1293895ec23fe01472e
32045 Author: Kumar Gala <galak@kernel.crashing.org>
32046 Date: Thu Aug 16 11:01:21 2007 -0500
32048 Fix up some fdt issues on 8544DS
32050 It looks like we had a merge issue that duplicated a bit of code
32051 in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
32052 the MAC address properly set in the device tree on boot for TSEC1
32054 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32056 commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
32057 Author: Niklaus Giger <niklaus.giger@netstal.com>
32058 Date: Thu Aug 16 15:16:03 2007 +0200
32060 PPC4xx:HCU4/5 cleanup
32062 Minor cleanups to confirm to the u-boot coding style.
32063 Some german expressions -> english.
32064 HCU5 enforces a unique IP adress for a given slot in the rack.
32066 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32068 commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
32069 Author: Niklaus Giger <niklaus.giger@netstal.com>
32070 Date: Thu Aug 16 15:16:02 2007 +0200
32072 PPC4xx:HCU4/5 cleanup ecc/sdram init
32074 Make ecc initialisation robust, as DDR2-ECC errors may be generated
32075 while zeroing the RAM.
32077 Return 16 bytes (a cacheline) less than the available memory, as the
32078 board and/or PPC440EPx might have problems accessing the last bytes.
32080 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32082 commit d35b508a55508535b6e8445b718585d27df733d3
32083 Author: Kim Phillips <kim.phillips@freescale.com>
32084 Date: Wed Aug 15 22:29:56 2007 -0500
32086 fdt: suppress unused variable 'bd' warning
32088 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32090 commit 82bd9ee77490588d4da785d75829ca63d0176baf
32091 Author: Andy Fleming <afleming@freescale.com>
32092 Date: Wed Aug 15 20:06:50 2007 -0500
32094 Fix warnings from of_data copy fix
32096 Forgot to cast of_flat_tree to ulong.
32098 Signed-off-by: Andy Fleming <afleming@freescale.com>
32100 commit 7613afda77d5eec0f47d303025b0c661b70e4c73
32101 Author: Andy Fleming <afleming@freescale.com>
32102 Date: Wed Aug 15 20:03:44 2007 -0500
32104 Don't wait for disconnected TSECs
32106 The TSEC driver's PHY code waits a long time for autonegotiation to
32107 complete, even if the link is down. The PHY knows the link is
32108 down or up before autonegotiation completes, so we can short-circuit
32109 the process if the link is down.
32111 Signed-off-by: Andy Fleming <afleming@freescale.com>
32113 commit b96c83d4ae475a70ef2635cd0e748174c44c8601
32114 Author: Andy Fleming <afleming@freescale.com>
32115 Date: Wed Aug 15 20:03:34 2007 -0500
32117 Fix numerous bugs in the 8568 UEC support
32119 Actually, fixed a large bug in the UEC for *all* platforms.
32120 How did this ever work?
32122 uec_init() did not follow the spec for eth_init(), and returned
32123 0 on success. Switch it to return the link like tsec_init()
32126 The immap for the 8568 was defined based on MPC8568, rather than
32131 CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
32133 Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
32136 Signed-off-by: Andy Fleming <afleming@freescale.com>
32138 commit 3a79013e2adda53332dfd0b511066a805e929a9d
32139 Author: Andy Fleming <afleming@freescale.com>
32140 Date: Wed Aug 15 20:03:25 2007 -0500
32142 Define tsec flag values in config files
32144 The tsec_info structure and array has a "flags" field for each
32145 ethernet controller. This field is the only reason there are
32146 settings. Switch to defining TSECn_FLAGS for each controller
32147 in the config header, and we can greatly simplify the array, and
32148 also simplify the addition of future boards.
32150 Signed-off-by: Andy Fleming <afleming@freescale.com>
32152 commit ec7238229507e7f47533a611ea8c53319d234cf3
32153 Author: Andy Fleming <afleming@freescale.com>
32154 Date: Wed Aug 15 20:03:13 2007 -0500
32156 Add support for building all boards with a TSEC
32158 Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
32159 Now we can do a MAKEALL test on all of them!
32161 Signed-off-by: Andy Fleming <afleming@freescale.com>
32163 commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
32164 Author: Andy Fleming <afleming@freescale.com>
32165 Date: Wed Aug 15 17:30:56 2007 -0500
32167 Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
32169 The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
32170 neglected to *also* put the code inside the similar #ifdef
32171 for CONFIG_OF_FLAT_TREE.
32173 Signed-off-by: Andy Fleming <afleming@freescale.com>
32175 commit 78f9fef7f406078c8bf7191e665a73f795157746
32176 Author: Scott Wood <scottwood@freescale.com>
32177 Date: Wed Aug 15 15:46:46 2007 -0500
32179 mpc885ads: Don't define CONFIG_BZIP2.
32181 bzip2 requires a significant chunk of malloc space, and there isn't
32182 enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
32183 and a downloaded image at 0x400000.
32185 Signed-off-by: Scott Wood <scottwood@freescale.com>
32187 commit 002275a3ed8b114885f6702d6d544d0780dfe689
32188 Author: Michal Simek <Monstr@seznam.cz>
32189 Date: Thu Aug 16 08:54:10 2007 +0200
32191 Bios emulator - fix microblaze toolchain problem
32193 microblaze CPU have problem with bios_emulator code.
32194 Microblaze toolchain doesn't support PRAGMA PACK.
32196 Signed-off-by: Michal Simek <monstr@monstr.eu>
32198 commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
32199 Author: Wolfgang Denk <wd@denx.de>
32200 Date: Thu Aug 16 11:51:04 2007 +0200
32202 Minor Coding Style fix; Update CHANGELOG file.
32204 Signed-off-by: Wolfgang Denk <wd@denx.de>
32206 commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
32207 Author: Stefan Roese <sr@denx.de>
32208 Date: Thu Aug 16 11:21:49 2007 +0200
32210 ppc4xx: Remove #warning in esd auto_update.c
32212 Signed-off-by: Stefan Roese <sr@denx.de>
32214 commit 2d78074d2e806edc380c1464eb9e5df335ece65e
32215 Author: Stefan Roese <sr@denx.de>
32216 Date: Fri Jun 22 17:32:28 2007 +0200
32218 ppc7xx: Update CPCI750 board
32220 This small CPCI750 update extends the board specific command
32221 "show_config" to display the Marvell strapping registers and
32222 extends the PCI IDE controller.
32224 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
32225 Signed-off-by: Stefan Roese <sr@denx.de>
32227 commit 78cff50edba6b1508eb15c2f53ce966ac891eb9e
32228 Author: Michal Simek <monstr@monstr.eu>
32229 Date: Thu Aug 16 10:46:28 2007 +0200
32231 [FIX] Changes for bios_emulator code for others architecture
32233 commit 6e0e2253f039344f8ebd2787285fdba90e6714e8
32234 Author: Michal Simek <monstr@monstr.eu>
32235 Date: Thu Aug 16 10:45:09 2007 +0200
32237 [FIX] Remove unused include file
32239 commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
32240 Author: Stefan Roese <sr@denx.de>
32241 Date: Thu Aug 16 10:18:33 2007 +0200
32243 ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
32245 Signed-off-by: Stefan Roese <sr@denx.de>
32247 commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
32248 Author: Stefan Roese <sr@denx.de>
32249 Date: Thu Aug 16 09:54:51 2007 +0200
32251 Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
32253 Signed-off-by: Stefan Roese <sr@denx.de>
32255 commit 02ba7022f62bb75908296c58c63866e1d294b69a
32256 Author: Stefan Roese <sr@denx.de>
32257 Date: Thu Aug 16 09:52:29 2007 +0200
32259 ppc4xx: Update Sequoia/Rainier bootstrap command
32261 As suggested by David Mitchell, here an update for the Sequoia/Rainier
32264 Signed-off-by: Stefan Roese <sr@denx.de>
32266 commit 35cc4e4823668e8745854899cfaedd4489beb0ef
32267 Author: Kim Phillips <kim.phillips@freescale.com>
32268 Date: Wed Aug 15 22:30:39 2007 -0500
32270 mpc83xx: enable libfdt by default on freescale boards
32272 this enables libfdt code by default for the
32273 freescale mpc8313erdb, mpc832xemds, mpc8349emds,
32274 mpc8349itx and gp boards.
32276 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32278 commit 3fde9e8b22cfbd7af489214758f9839a206576cb
32279 Author: Kim Phillips <kim.phillips@freescale.com>
32280 Date: Wed Aug 15 22:30:33 2007 -0500
32282 mpc83xx: migrate remaining freescale boards to libfdt
32284 this adds libfdt support code for the freescale
32285 mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
32288 Boards remain compatible with OF_FLAT_TREE.
32290 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32292 commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
32293 Author: Kim Phillips <kim.phillips@freescale.com>
32294 Date: Wed Aug 15 22:30:26 2007 -0500
32296 mpc83xx: move common /memory node update mechanism to cpu.c
32298 also adds common prototypes to include/common.h.
32300 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32302 commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
32303 Author: Kim Phillips <kim.phillips@freescale.com>
32304 Date: Wed Aug 15 22:30:19 2007 -0500
32306 mpc83xx: remaining 8360 libfdt fixes
32308 PCI clocks and QE frequencies weren't being updated, and the core clock
32309 was being updated incorrectly. This patch also adds a /memory node if
32310 it doesn't already exist prior to update.
32312 plus some cosmetic trimming to single line comments.
32314 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32316 commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
32317 Author: Kim Phillips <kim.phillips@freescale.com>
32318 Date: Wed Aug 15 22:30:12 2007 -0500
32320 mpc83xx: fix UEC2->1 typo in libfdt setup code
32322 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32324 commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
32325 Author: Kim Phillips <kim.phillips@freescale.com>
32326 Date: Wed Aug 15 22:30:05 2007 -0500
32328 mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
32330 and reorder the existing 83xx maintainers alpha.
32332 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32334 commit 5b4de9309d7a03aa1db2e5391ab696363391f460
32335 Author: Michal Simek <monstr@monstr.eu>
32336 Date: Wed Aug 15 21:15:05 2007 +0200
32338 [FIX] Resolve problem with warnings
32339 microblaze toolchain don't support PRAGMA PACK.
32341 commit d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4
32342 Author: Michal Simek <monstr@monstr.eu>
32343 Date: Wed Aug 15 21:05:07 2007 +0200
32345 [FIX] Correction command setting for Microblaze boards
32347 commit 7aa63d8cd30ab20ac2fd1ab86e60471de8b1f1e5
32348 Author: Michal Simek <monstr@monstr.eu>
32349 Date: Wed Aug 15 21:03:41 2007 +0200
32351 [FIX] Correction command definition
32353 commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
32354 Author: Jon Loeliger <jdl@freescale.com>
32355 Date: Wed Aug 15 11:55:35 2007 -0500
32357 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
32359 Remove a leftover in net/tftp.c while we're at it.
32361 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32363 commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
32364 Author: Jon Loeliger <jdl@freescale.com>
32365 Date: Wed Aug 15 12:20:40 2007 -0500
32367 Move the MPC8641HPCN board under board/freescale.
32369 Minor path corrections needed to ensure buildability.
32371 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32373 commit 8662577fe36fdb6a44b55b998d9daac6392a736a
32374 Author: Jon Loeliger <jdl@freescale.com>
32375 Date: Wed Aug 15 11:46:22 2007 -0500
32377 86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
32379 Remove a leftover in net/tftp.c while we're at it.
32381 Signed-off-by: Jon Loeliger <jdl@freescale.com>
32383 commit 210f463c71917b7a4495c2103c228b9c179ae64d
32384 Author: Jerry Van Baren <gvb.uboot@gmail.com>
32385 Date: Wed Aug 15 11:13:15 2007 -0400
32387 Fix where the #ifdef CFG_BOOTMAPSZ is placed.
32389 Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
32390 interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
32391 when it should have gone inside of the conditional. As a result, it
32392 broke non-LIBFDT board builds.
32394 Also added a missing "not." to the comment.
32396 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32398 commit 0e19209767194a97cec6d93dba9e64d1da8d548e
32399 Author: Niklaus Giger <niklaus.giger@netstal.com>
32400 Date: Wed Aug 15 12:14:23 2007 +0200
32402 PPC4xx:HCU4/5-Board fix compile warning
32404 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
32406 commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
32407 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32408 Date: Tue Aug 14 14:06:45 2007 -0500
32410 Fix malloc size error in ahci_init_one.
32412 Typically this causes scsi init to corrupt the
32413 devlist and break the coninfo command.
32414 Fix a compiler size warning.
32416 Signed-off-by: Jason Jin <jason.jin@freescale.com>
32417 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32418 Acked-by: Andy Fleming <afleming@freescale.com>
32420 commit b361acd64fd2525c081b9b288b0804efe209c0e9
32421 Author: ksi@koi8.net <ksi@koi8.net>
32422 Date: Tue Aug 14 10:02:16 2007 -0700
32424 TI DaVinci - fix unsupported %hhx format
32426 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
32428 commit f01dbb5424a81453c81190dd30e945891466f621
32429 Author: Wolfgang Denk <wd@denx.de>
32430 Date: Tue Aug 14 18:42:36 2007 +0200
32432 Coding style cleanup. Update CHANGELOG.
32434 Signed-off-by: Wolfgang Denk <wd@denx.de>
32436 commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
32437 Author: Andy Fleming <afleming@freescale.com>
32438 Date: Tue Aug 14 10:32:59 2007 -0500
32440 Fix initrd/dtb interaction
32442 The original code would wrongly relocate the blob to be right before
32443 the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
32444 if it is defined. So we make two changes:
32446 1) flag the blob for relocation whenever its address is above BOOTMAPSZ
32448 2) If the blob is being relocated, relocate it before kbd, not initrd
32450 Signed-off-by: Andy Fleming <afleming@freescale.com>
32452 commit e54b970173769307a116bd34028b6d0c2eea2a4e
32453 Author: Peter Pearse <peter.pearse@arm.com>
32454 Date: Tue Aug 14 15:40:00 2007 +0100
32456 Supply spi interface in at45.c
32458 commit 4ce846ec59f36b85d6644a769690ad3feb667575
32459 Author: Stefan Roese <sr@denx.de>
32460 Date: Tue Aug 14 15:12:01 2007 +0200
32462 POST: Fix merge problem
32464 Signed-off-by: Stefan Roese <sr@denx.de>
32466 commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
32467 Author: Stefan Roese <sr@denx.de>
32468 Date: Tue Aug 14 15:03:17 2007 +0200
32470 Coding style cleanup
32472 Signed-off-by: Stefan Roese <sr@denx.de>
32474 commit 779e975117a75e91fcebe226a63104dbfb924ab1
32475 Author: Stefan Roese <sr@denx.de>
32476 Date: Tue Aug 14 14:44:41 2007 +0200
32478 ppc4xx: Add initial Zeus (PPC405EP) board support
32480 Signed-off-by: Stefan Roese <sr@denx.de>
32482 commit c5a172a5fd636c12467429e3f7910e53773979c6
32483 Author: Stefan Roese <sr@denx.de>
32484 Date: Tue Aug 14 14:41:55 2007 +0200
32486 POST: Add option for external ethernet loopback test
32488 When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
32489 is not done using an internal loopback connection, but by assuming
32490 that an external loopback connector is plugged into the board.
32492 Signed-off-by: Stefan Roese <sr@denx.de>
32494 commit eb2b4010ae426245172988804ee8d9193fb41038
32495 Author: Stefan Roese <sr@denx.de>
32496 Date: Tue Aug 14 14:39:44 2007 +0200
32498 POST: Add ppc405 support to cache and UART POST
32500 Signed-off-by: Stefan Roese <sr@denx.de>
32502 commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
32503 Author: Peter Pearse <peter.pearse@arm.com>
32504 Date: Tue Aug 14 10:46:32 2007 +0100
32506 Replace lost end of at45.c.
32508 commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
32509 Author: Peter Pearse <peter.pearse@arm.com>
32510 Date: Tue Aug 14 10:30:06 2007 +0100
32512 Update Makefiles for merged and split at45.c.
32514 commit 3454cece2db57cb9eb7087995f7e73066a163f71
32515 Author: Peter Pearse <peter.pearse@arm.com>
32516 Date: Tue Aug 14 10:21:06 2007 +0100
32518 Delete the merged files.
32520 commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
32521 Author: Peter Pearse <peter.pearse@arm.com>
32522 Date: Tue Aug 14 10:14:05 2007 +0100
32526 commit d4fc6012fd0a5c211b825691f44b06f8032c0551
32527 Author: Peter Pearse <peter.pearse@arm.com>
32528 Date: Tue Aug 14 10:10:52 2007 +0100
32530 Add MACH_TYPE records for several AT91 boards.
32531 Merge to two at45.c files into a common file, split to at45.c and spi.c
32532 Fix spelling error in DM9161 PHY Support.
32533 Initialize at91rm9200 board (and set LED).
32534 Add PIO control for at91rm9200dk LEDs and Mux.
32535 Change dataflash partition boundaries to be compatible with Linux 2.6.
32537 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
32538 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
32540 commit 4ef35e53c693556c54b0c22d6f873de87bade253
32541 Author: Wolfgang Denk <wd@denx.de>
32542 Date: Tue Aug 14 09:54:46 2007 +0200
32544 Coding style cleanup, update CHANGELOG
32546 Signed-off-by: Wolfgang Denk <wd@denx.de>
32548 commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
32549 Author: Wolfgang Denk <wd@denx.de>
32550 Date: Tue Aug 14 09:47:27 2007 +0200
32552 Coding style cleanup; rebuild CHANGELOG
32554 commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
32555 Author: Randy Vinson <rvinson@linuxbox.(none)>
32556 Date: Tue Feb 27 19:42:22 2007 -0700
32558 85xxCDS: Add make targets for legacy systems.
32560 The PCI ID select values on the Arcadia main board differ depending
32561 on the version of the hardware. The standard configuration supports
32562 Rev 3.1. The legacy target supports Rev 2.x.
32564 Signed-off-by Randy Vinson <rvinson@mvista.com>
32566 commit e41094c7e38177c755fbd9b182018069614f080d
32567 Author: Andy Fleming <afleming@freescale.com>
32568 Date: Tue Aug 14 01:50:09 2007 -0500
32570 85xxCDS: Enable the VIA PCI-to-ISA bridge.
32572 Author: Randy Vinson <rvinson@linuxbox.(none)>
32574 Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
32575 Arcadia main board.
32577 Signed-off-by: Randy Vinson <rvinson@mvista.com>
32578 Signed-off-by: York Sun <yorksun@freescale.com>
32580 commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
32581 Author: Andy Fleming <afleming@freescale.com>
32582 Date: Tue Aug 14 00:14:25 2007 -0500
32584 Add support for UEC to 8568
32586 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32587 Signed-off-by: Andy Fleming <afleming@freescale.com>
32589 commit c59e4091ffe0148398b9e9ff14a019ea038b7432
32590 Author: Haiying Wang <Haiying.Wang@freescale.com>
32591 Date: Tue Jun 19 14:18:34 2007 -0400
32593 Add PCI support for MPC8568MDS board
32595 This patch is against u-boot-mpc85xx.git of www.denx.com
32597 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32598 Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
32600 commit d111d6382c99fdea08c2312eeeae8786945e189a
32601 Author: Haiying Wang <Haiying.Wang@freescale.com>
32602 Date: Tue Jun 19 14:18:32 2007 -0400
32604 Empirically set cpo and clk_adjust for mpc85xx DDR2 support
32606 This patch is against u-boot-mpc85xx.git of www.denx.com
32608 Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
32609 both MPC8548CDS board and MPC8568MDS board, especially for supporting
32612 Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
32613 DDR2 on all current board versions especially ver 1.92 or later to bring
32616 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
32618 commit 3db0bef59eab1155801618cef5c481e97553b597
32619 Author: Kumar Gala <galak@kernel.crashing.org>
32620 Date: Tue Aug 7 18:07:27 2007 -0500
32622 Use an absolute address when jumping out of 4k boot page
32624 On e500 when we leave the 4k boot page we should use an absolute address since
32625 we don't know where the board code may want us to be really running at.
32627 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
32629 commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
32630 Author: Andy Fleming <afleming@freescale.com>
32631 Date: Mon Aug 13 14:49:59 2007 -0500
32633 MPC85xx BA bits not set for 3-bit bank address DIMM
32635 The current implementation does not set the number of bank address bits
32636 (BA) in the processor. The default assumes 2 logical bank bits. This
32637 works fine for a DIMM that uses devices with 4 internal banks (SPD
32638 byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
32639 devices with 8 internal banks (SPD byte17 = 0x8).
32641 Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
32643 commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
32644 Author: Andy Fleming <afleming@freescale.com>
32645 Date: Mon Aug 13 14:38:06 2007 -0500
32647 Fix minor 85xx warnings
32649 Some patches had inserted warnings into the build:
32650 * mpc8560ads declared data without using it
32651 * cpu_init declared ecm and immap without using it in all CONFIGs
32652 * MPC8548CDS.h had its default filenames changed so that they contained
32653 "\m" in the paths. Made the defaults not Windows-specific (or
32656 Signed-off-by: Andy Fleming <afleming@freescale.com>
32658 commit f2cff6b104f82b993bef6086ce0c97159bbe1add
32659 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32660 Date: Fri Jul 27 01:50:52 2007 -0500
32662 8548cds PCIE support.
32664 Make the early L1 cache stack region guarded to prevent speculative
32665 fetches outside the locked range.
32667 Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
32668 init.S whitespace cleanup.
32670 Allow TEXT_BASE value to be specified on command line. This allows it
32671 to be set to 0xfffc0000 which cuts the uboot binary in half.
32673 Clear and enable lbc and ecm errors.
32675 Update last_busno in device-tree for pci and pcie.
32677 Remove load of obsolete cpu/mpc85xx/pci.0
32679 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32680 Acked-by: Andy Fleming <afleming@freescale.com>
32682 commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
32683 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32684 Date: Fri Jul 27 01:50:51 2007 -0500
32686 8544ds PCIE support
32688 PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
32690 Enable LBC and ECM errors and clear error registers.
32692 Add tftpflash env var to get uboot from tftp server and flash it.
32694 Add pci/pcie convenience env vars to display register space:
32695 "run pcie3regs" to see all pcie3 ccsr registers
32696 "run pcie3cfg" to see all cfg registers
32697 Whitespace cleanup and MPC8544DS.h
32699 Enable CONFIG_INTERRUPTS.
32701 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32702 Acked-by: Andy Fleming <afleming@freescale.com>
32704 commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
32705 Author: Andy Fleming <afleming@freescale.com>
32706 Date: Tue Aug 14 01:34:21 2007 -0500
32708 85xx start.S cleanup and exception support
32710 From: Ed Swarthout <Ed.Swarthout@freescale.com>
32712 Support external interrupts from platform to eliminate system hangs.
32713 Define CONFIG_INTERRUPTS board configure option to enable.
32714 Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
32716 Remove extra cpu initialization redundant with hardware initialization.
32717 Whitespace cleanup.
32719 Define and use _START_OFFSET consistent with other processors using
32722 Move additional code from .text to boot page to make room for
32723 exception vectors at start of image.
32725 Handle Machine Check, External and Critical exceptions.
32727 Fix e500 machine check error determination in traps.c
32729 TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
32731 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32732 Acked-by: Andy Fleming <afleming@freescale.com>
32734 commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
32735 Author: Andy Fleming <afleming@freescale.com>
32736 Date: Tue Aug 14 01:33:18 2007 -0500
32738 Add MPC8544DS README
32740 Signed-off-by: Andy Fleming <afleming@freescale.com>
32742 commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
32743 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32744 Date: Fri Jul 27 01:50:48 2007 -0500
32746 85xx allow debugger to configure ddr.
32748 Only check for mpc8548 rev 1 when compiled for 8548.
32750 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32751 Acked-by: Andy Fleming <afleming@freescale.com>
32753 commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
32754 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32755 Date: Fri Jul 27 01:50:47 2007 -0500
32757 mpc85xx L2 cache reporting and SRAM relocation option.
32759 Allow debugger to override flash cs0/cs1 settings to enable alternate
32762 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32763 Acked-by: Andy Fleming <afleming@freescale.com>
32765 commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
32766 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
32767 Date: Fri Jul 27 01:50:46 2007 -0500
32769 e500 needs ppc_asm.tmp MCK_EXCEPTION
32771 Always define MCK_EXCEPTION macro - so e500 can use it too.
32773 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
32774 Acked-by: Andy Fleming <afleming@freescale.com>
32776 commit 53a5c424bf8655b7b4e2c305a441963259a26a81
32777 Author: David Updegraff <dave@cray.com>
32778 Date: Mon Jun 11 10:41:07 2007 -0500
32780 multicast tftp: RFC2090
32782 Implemented IETF RFC2090, Multicast TFTP. Initial implementation
32783 on Realtek RTL8139 and Freescale TSEC.
32785 Signed-off-by: David Updegraff <dave@cray.com>
32786 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32788 commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
32789 Author: Wilson Callan <wcallan@savantav.com>
32790 Date: Sat Jul 28 10:56:13 2007 -0400
32792 New CONFIG_BOOTP_SERVERIP option
32794 Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
32795 from the bootp server
32797 Signed-off-by: Wilson Callan <wcallan@savantav.com>
32798 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32800 commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
32801 Author: Mike Rapoport <mike@compulab.co.il>
32802 Date: Sun Aug 12 08:48:27 2007 +0300
32804 Add ability to take MAC address from the environment to DM9000 driver
32806 Signed-off-by: Mike Rapoport <mike@compulab.co.il>
32807 Signed-off-by: Ben Warren <bwarren@qstreams.com>
32809 commit be5d72d10d47609326226225181e301fb9a33b58
32810 Author: Wolfgang Denk <wd@denx.de>
32811 Date: Mon Aug 13 21:57:53 2007 +0200
32813 Minor coding style cleanup. Update CHANGELOG.
32815 Signed-off-by: Wolfgang Denk <wd@denx.de>
32817 commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
32818 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
32819 Date: Sat Aug 11 06:54:58 2007 -0500
32821 Modify SBC8641D to use new Freescale PCI routines
32823 PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
32826 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
32827 Signde-off-by: Jon Loeliger <jdl@freescale.com>
32829 commit a08458303e7f9db67f296980036d3292c35cb45c
32830 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32831 Date: Fri Jun 29 18:38:51 2007 +0200
32833 atmel_mci: Fix data timeout value
32835 Calculate the data timeout based on values from the CSD instead of
32836 just using a hardcoded DTOR value. This is a backport of a similar fix
32837 in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
32840 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32842 commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
32843 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32844 Date: Mon Aug 13 17:22:31 2007 +0200
32846 AVR32: Include <div64.h> instead of <asm/div64.h>
32848 include/asm-avr32/div64.h was recently moved to include/div64.h, but
32849 cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
32850 the patch was merged perhaps?)
32852 This patch updates cpu/at32ap/interrupts.c so that the avr32 port
32855 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32857 commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
32858 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
32859 Date: Wed Jun 27 13:34:26 2007 +0200
32861 atmel_mci: Use 512 byte blocksize if possible
32863 Instead of always using the largest blocksize the card supports, check
32864 if it can support smaller block sizes and use 512 bytes if possible.
32865 Most cards do support this, and other parts of u-boot seem to have
32866 trouble with block sizes different from 512 bytes.
32868 Also enable underrun/overrun protection.
32870 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
32871 Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
32873 commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
32874 Author: Stefan Roese <sr@denx.de>
32875 Date: Mon Aug 13 09:05:33 2007 +0200
32877 ppc4xx: Fix problem in PLL clock calculation
32879 This patch was originall provided by David Mitchell <dmitchell@amcc.com>
32880 and fixes a bug in the PLL clock calculation.
32882 Signed-off-by: Stefan Roese <sr@denx.de>
32884 commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
32885 Author: Wolfgang Denk <wd@denx.de>
32886 Date: Sun Aug 12 21:34:50 2007 +0200
32890 commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
32891 Author: Wolfgang Denk <wd@denx.de>
32892 Date: Sun Aug 12 21:34:34 2007 +0200
32894 Minor alignment of output, 2nd try.
32895 Also update CHANGELOG
32897 Signed-off-by: Wolfgang Denk <wd@denx.de>
32899 commit 6b309f22a724fad8418e811751a0741b893419cf
32900 Author: Wolfgang Denk <wd@denx.de>
32901 Date: Sun Aug 12 20:35:49 2007 +0200
32903 Minor alignment of output
32905 Signed-off-by: Wolfgang Denk <wd@denx.de>
32907 commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
32908 Author: Wolfgang Denk <wd@denx.de>
32909 Date: Sun Aug 12 18:28:18 2007 +0200
32911 Cleanup output on ADS5121 board
32913 Signed-off-by: Wolfgang Denk
32915 commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
32916 Author: Wolfgang Denk <wd@denx.de>
32917 Date: Sun Aug 12 15:11:38 2007 +0200
32919 Adapt board configuration and fix kernel crash on MCC200 board.
32921 The update procedure was modified to turn off the USB subsystem
32922 before exit for MCC200 and TRAB. This is necessary as otherwise the
32923 USB controller continues to write periodically to system memory!
32925 MCC200-specific notes:
32926 - the patch disables the magic key check for MCC200
32927 - the patch contains the configuration changes made
32928 for the new revision of the board.
32930 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
32931 Signed-off-by: Wolfgang Denk <wd@denx.de>
32933 commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
32934 Author: Wolfgang Denk <wd@denx.de>
32935 Date: Sun Aug 12 14:47:54 2007 +0200
32937 Adjust default configuration of ADS5121 board.
32939 Signed-off-by: Wolfgang Denk <wd@denx.de>
32941 commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
32942 Author: Wolfgang Denk <wd@denx.de>
32943 Date: Sun Aug 12 14:27:39 2007 +0200
32945 Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
32947 Signed-off-by: Wolfgang Denk <wd@denx.de>
32949 commit 5fe6be6208dda852c3564e384bd78d75784dea3e
32950 Author: Gerald Van Baren <vanbaren@cideas.com>
32951 Date: Tue Aug 7 21:14:22 2007 -0400
32953 Improve error print messages.
32955 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32957 commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
32958 Author: Kim Phillips <kim.phillips@freescale.com>
32959 Date: Tue Jul 17 13:57:04 2007 -0500
32961 fdt: allow for builds that don't want env and bd_t nodes
32963 protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
32966 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32968 commit 91148bf7aeba142d6f348805db7625db7da64d6f
32969 Author: Kim Phillips <kim.phillips@freescale.com>
32970 Date: Tue Jul 17 13:56:53 2007 -0500
32972 fdt: do board setup based on fdt address specified on bootm line
32974 The last fdt patch to bootm did board setup based on the address
32975 specified by a prior fdt address command invocation. The bootm
32976 code, as its call to fdt_chosen does, should use the fdt specified
32977 by the user on the bootm command. Note this restores full
32978 functionality for the 8360's existing default boot environment
32979 values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
32980 before booting a kernel).
32982 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
32984 commit e125a2ffc209dd34794e326c7175658253beadf3
32985 Author: Gerald Van Baren <vanbaren@cideas.com>
32986 Date: Tue Jul 10 20:40:39 2007 -0400
32988 Call ft_board_setup() from the bootm command.
32990 In the patch titled "Create new fdt boardsetup command..." I removed the
32991 call to ft_board_setup() from the routine fdt_chosen(), but I forgot
32992 to add a direct call back into cmd_bootm.c
32994 This fixes the oversight by adding the direct call to the bootm command.
32996 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
32998 commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
32999 Author: Gerald Van Baren <vanbaren@cideas.com>
33000 Date: Mon Jun 25 23:25:28 2007 -0400
33002 Create new fdt boardsetup command, fix bug parsing [] form of set values.
33004 Previously ft_board_setup() was called by fdt_chosen() which was not
33005 really correctly structured. This splits ft_board_setup() out by creating
33006 a new fdt boardsetup command.
33008 Fix a bug when parsing fdt set command values which have the square
33009 bracket form [00 11 22 33] - the length was updated incorrectly in when
33012 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33014 commit 6f35ded9e85493595e0eb66a82b502a95326d049
33015 Author: Gerald Van Baren <vanbaren@cideas.com>
33016 Date: Mon Jun 25 20:55:58 2007 -0400
33018 Tighten up the error messages.
33020 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33022 commit c45874b05aae897a6c29d1a97d4bb708fca2756c
33023 Author: Gerald Van Baren <vanbaren@cideas.com>
33024 Date: Mon Jun 25 19:52:23 2007 -0400
33026 Asthetic improvements: error messages and line lengths.
33028 Tighten up the error messages, split overlength lines.
33030 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33032 commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
33033 Author: Gerald Van Baren <vanbaren@cideas.com>
33034 Date: Fri May 25 22:08:57 2007 -0400
33036 Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
33038 The fdt_chosen() function was adding/seting some properties ad-hoc
33039 improperly and duplicated (poorly) what was done in ft_board_setup()
33041 Clean up long lines (setting properties, printing errors).
33043 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33045 commit 06e19a07701c968f15d72c083b5872a1a11c7b01
33046 Author: Gerald Van Baren <vanbaren@cideas.com>
33047 Date: Mon May 21 23:27:16 2007 -0400
33049 For fdt_find_node_by_path(), handle the root path properly.
33051 Also removes the special case root path detection in cmd_fdt.c since it
33052 is no longer necessary.
33054 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33056 commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
33057 Author: Gerald Van Baren <vanbaren@cideas.com>
33058 Date: Thu May 17 23:54:36 2007 -0400
33060 Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
33062 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33063 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33065 commit 1a861169bc3758f9de3aead62b058736c6891246
33066 Author: Gerald Van Baren <vanbaren@cideas.com>
33067 Date: Wed Jun 6 22:47:58 2007 -0400
33069 Replace fdt_node_offset() with fdt_find_node_by_path().
33071 The new name matches more closely the kernel's name, which is also
33072 a much better description.
33074 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33075 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33077 commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
33078 Author: Gerald Van Baren <vanbaren@cideas.com>
33079 Date: Wed May 16 22:39:59 2007 -0400
33081 Fix cmd_fdt line lengths, refactor code.
33083 Break lines that were greater than 80 characters in length.
33084 Move the fdt print and property parsing code to separate static functions
33085 to reduce coding clutter in the fdt_cmd handling body.
33087 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33089 commit 25114033ab21788810c48ba4df103b649da1223b
33090 Author: Gerald Van Baren <vanbaren@cideas.com>
33091 Date: Sat May 12 09:47:25 2007 -0400
33093 FDT command improvements.
33095 Fix "fdt set" so that it will create a non-existing property.
33096 Add "fdt mknode" to create nodes.
33098 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33100 commit 38eb508e8e811e2e57628f445de3a24a23c7d804
33101 Author: Gerald Van Baren <vanbaren@cideas.com>
33102 Date: Sat May 12 09:45:46 2007 -0400
33104 Reorganize and fix problems (returns) in the bootm command.
33106 Do *NOT* return after the "point of no return" has been passed.
33107 If something goes wrong, the board must be reset after that point.
33108 Move the "Transferring control to Linux" debug message back to where it
33109 belongs: just before transferring control to linux.
33111 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33113 commit 89c8757d8f213c47709bdc4efe0695263a6080a6
33114 Author: Gerald Van Baren <vanbaren@cideas.com>
33115 Date: Tue May 8 21:27:35 2007 -0400
33117 Fix bugs in the CONFIG_OF_LIBFDT
33119 Stupid coding mistakes (identified by Timur Tabi, thanks).
33121 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33123 commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
33124 Author: Gerald Van Baren <vanbaren@cideas.com>
33125 Date: Wed Apr 25 22:47:15 2007 -0400
33127 Improve fdt move length handling.
33129 Make the length parameter optional: if not specified, do the move using
33130 the current size unchanged.
33132 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33134 commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
33135 Author: Gerald Van Baren <vanbaren@cideas.com>
33136 Date: Wed Apr 25 22:23:36 2007 -0400
33138 Minor code clean up.
33140 Declare the variable fdt properly as extern.
33141 Call the "set_fn" function pointer the "short way" without the full
33142 dereferencing syntax.
33144 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33146 commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
33147 Author: Gerald Van Baren <vanbaren@cideas.com>
33148 Date: Wed Apr 25 21:24:27 2007 -0400
33150 Improve error messages, more informative.
33152 Print more than the raw libfdt error message strings. This is especially
33153 useful for cluing in the user when the bootm command aborts due to
33156 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33158 commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
33159 Author: Gerald Van Baren <vanbaren@cideas.com>
33160 Date: Fri Apr 20 22:46:53 2007 -0400
33162 libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
33164 This is the way u-boot reduces configured-out code. At Wolfgang
33165 Grandegger and Wolfgang Denk's request, make libfdt conform.
33167 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33169 commit 923efd286411ed052d9e074f59f8986d6081061c
33170 Author: Bruce Adler <bruce.adler@ccpu.com>
33171 Date: Fri Aug 10 14:54:47 2007 -0700
33173 add image size and descriptors for Spartan 3E FPGA chips
33175 Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
33177 Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
33179 commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
33180 Author: Kim Phillips <kim.phillips@freescale.com>
33181 Date: Fri Aug 10 15:34:48 2007 -0500
33183 make MAKEALL more immune to merge conflicts
33185 ..by placing board entries one per line, as suggested by jdl.
33187 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33189 commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
33190 Author: Kim Phillips <kim.phillips@freescale.com>
33191 Date: Fri Aug 10 13:28:25 2007 -0500
33193 README: Remove outdated cpu type, board type, and NAME_config lists
33195 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33197 commit 49bb59912d21aacb507eb81fd21fb7af650c706c
33198 Author: Dave Liu <r63238@freescale.com>
33199 Date: Fri Aug 10 15:48:59 2007 +0800
33201 mpc83xx: Suppress the warning 'burstlen'
33203 suppress the warning 'burstlen' of spd_sdram.
33205 Signed-off-by: Dave Liu <daveliu@freescale.com>
33207 commit c646bba6465a45c60746d4cc1602cd06c1960f2d
33208 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33209 Date: Thu Aug 9 15:11:03 2007 -0500
33211 Add support for SBC8641D. Config files.
33213 Add support for Wind River's SBC8641D reference board.
33215 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33216 Acked-by: Wolfgang Denk <wd@denx.de>
33217 Acked-by: Jon Loeliger <jdl@freescale.com>
33219 commit 8ac273271d57321f90505c7a51cdb1ef2113b628
33220 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33221 Date: Thu Aug 9 15:10:53 2007 -0500
33223 Add support for SBC8641D. Board files.
33225 Add support for Wind River's SBC8641D reference board.
33227 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33228 Acked-by: Wolfgang Denk <wd@denx.de>
33229 Acked-by: Jon Loeliger <jdl@freescale.com>
33231 commit c2c0ab4aff86622b837a48a0e560351f9afafb95
33232 Author: Stefan Roese <sr@denx.de>
33233 Date: Fri Aug 10 20:34:58 2007 +0200
33235 Conding style cleanup
33237 Signed-off-by: Stefan Roese <sr@denx.de>
33239 commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
33240 Author: Sergey Kubushyn <ksi@koi8.net>
33241 Date: Fri Aug 10 20:26:18 2007 +0200
33243 [ARM] TI DaVinci support, hopefully final
33245 Add support for the following DaVinci boards:
33252 - Split into separate board directories
33253 - Removed changes to MTD_DEBUG (or whatever it's called)
33254 - New CONFIG_CMD party line followed
33255 - Some cosmetic fixes, cleanup etc.
33256 - Patches against the latest U-Boot tree as of now.
33257 - Fixed CONFIG_CMD_NET in net files.
33258 - Fixed CONFIG_CMD_EEPROM for schmoogie.
33259 - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
33260 DV_EVM. Can't check if it works on SONATA, don't have a board any more,
33261 but it at least compiles.
33263 Here is an excerpt from session log on SCHMOOGIE...
33265 U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
33274 ETH PHY : DP83848 @ 0x01
33276 Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
33277 U-Boot > ping 192.168.253.10
33278 host 192.168.253.10 is alive
33281 Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
33282 Acked-by: Dirk Behme <dirk.behme@gmail.com>
33283 Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
33284 Acked-by: Stefan Roese <sr@denx.de>
33286 commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
33287 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
33288 Date: Fri Jul 27 01:50:45 2007 -0500
33290 fsl_pci_init cleanup.
33292 Do not enable normal errors created during probe (master abort, perr,
33293 and pcie Invalid Configuration access).
33295 Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
33297 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33298 Acked-by: Andy Fleming <afleming@freescale.com>
33300 commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
33301 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
33302 Date: Fri Jul 27 01:50:44 2007 -0500
33304 pciauto_setup_device bars_num fix
33306 Passing bars_num=0 to pciauto_setup_device should assign no bars.
33308 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33309 Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
33310 Acked-by: Andy Fleming <afleming@freescale.com>
33312 commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
33313 Author: Jon Loeliger <jdl@freescale.com>
33314 Date: Mon Aug 6 17:39:44 2007 -0500
33316 8641hpcn: Do correct sized pointer math.
33318 When I rebased Ed's patch and cleaned up a few compilation
33319 problems, I apparently rebased my brain on crack first.
33320 Fix that by doing (char *) sized pointer math as needed.
33322 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33324 commit cfc7a7f5bb3273c9951173c788001d45118f141f
33325 Author: Jon Loeliger <jdl@freescale.com>
33326 Date: Thu Aug 2 14:42:20 2007 -0500
33330 Remove rev 1 fixes.
33331 Always set PICGCR_MODE.
33332 Enable machine check and provide board config option
33333 to set and handle SoC error interrupts.
33335 Include MSSSR0 in error message.
33337 Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
33339 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33340 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33342 commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
33343 Author: Stefan Roese <sr@denx.de>
33344 Date: Fri Aug 10 10:42:25 2007 +0200
33346 Coding style cleanup
33348 Signed-off-by: Stefan Roese <sr@denx.de>
33350 commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
33351 Author: Dirk Behme <dirk.behme@googlemail.com>
33352 Date: Thu Aug 2 17:42:08 2007 +0200
33354 Make use of generic 64bit division in nand_util.c
33356 Use generic 64bit division in nand_util.c. This makes nand_util.c
33357 independent of any toolchain 64bit division.
33359 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33361 commit f7c086e94e8ce9aad7268af97f73aa6884686f27
33362 Author: Dirk Behme <dirk.behme@googlemail.com>
33363 Date: Thu Aug 2 17:41:14 2007 +0200
33365 Move 64bit division from avr32 to generic lib
33367 Move the 64bit division from lib_avr32 to lib_generic. With this, all
33368 boards can do_div/__div64_32 if needed, not only avr one. Code is put
33369 to lib_generic, so no larger memory footprint if not used. No code
33370 modifications. Thanks for proposal by HÃ¥vard Skinnemoen.
33372 Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
33374 commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
33375 Author: Niklaus Giger <niklausgiger@gmx.ch>
33376 Date: Fri Jul 27 11:31:22 2007 +0200
33378 Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
33380 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33382 commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
33383 Author: Niklaus Giger <niklausgiger@gmx.ch>
33384 Date: Fri Jul 27 11:30:33 2007 +0200
33386 Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
33388 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33390 commit e8397fc78c9394d71de233a4d810fbc9047e4c76
33391 Author: Niklaus Giger <niklausgiger@gmx.ch>
33392 Date: Fri Jul 27 11:38:26 2007 +0200
33394 Add PPC4xx-HCU4 and HCU5 boards: common files
33396 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33398 commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
33399 Author: Niklaus Giger <niklausgiger@gmx.ch>
33400 Date: Fri Jul 27 11:28:44 2007 +0200
33402 Add PPC4xx-HCU4 and HCU5 boards: make related
33404 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33406 commit 137fdd9f474ecb853efdace5200576308c67f18d
33407 Author: Niklaus Giger <niklausgiger@gmx.ch>
33408 Date: Fri Jul 27 11:28:03 2007 +0200
33410 Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
33412 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33414 commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
33415 Author: Niklaus Giger <niklausgiger@gmx.ch>
33416 Date: Fri Jul 27 11:27:15 2007 +0200
33418 Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
33420 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33422 commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
33423 Author: Niklaus Giger <niklausgiger@gmx.ch>
33424 Date: Fri Jul 27 11:25:31 2007 +0200
33426 Add PPC4xx-HCU4 and HCU5 boards: READMEs
33428 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33430 commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
33431 Author: Niklaus Giger <niklausgiger@gmx.ch>
33432 Date: Fri Jul 27 11:37:40 2007 +0200
33434 Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
33436 This series of patches adds support for 2 boards from Netstal Maschinen.
33438 The HCU4 has a PPC405Gpr and
33439 the HCU5 has a PPC440EPX.
33441 The HCU4 has a somehow complicated flash setup, as the booteprom is
33442 only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
33445 The HCU5 has only a booteprom as the whole code will be downloaded from a
33446 different board which has HD, CD-ROM, etc and where all code is stored.
33448 This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
33451 Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
33453 commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
33454 Author: Stefan Roese <sr@denx.de>
33455 Date: Fri Aug 10 08:42:55 2007 +0200
33457 ppc4xx: Update lwmon5 POST configuration
33459 Signed-off-by: Stefan Roese <sr@denx.de>
33461 commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
33462 Author: Yuri Tikhonov <yur@emcraft.com>
33463 Date: Fri Aug 10 08:25:22 2007 +0200
33465 POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
33467 The patch adds support for UART POST on ppc44x-based boards with no
33468 external serial clocks installed.
33470 Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
33471 Acked-by: Stefan Roese <sr@denx.de>
33473 commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
33474 Author: Kim Phillips <kim.phillips@freescale.com>
33475 Date: Mon Aug 6 18:18:34 2007 -0500
33477 mpc83xx: fix ITX[GP] O=builddir builds
33479 make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
33481 Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
33482 "BUILD_DIR=<some dir> ./MAKEALL ..."
33484 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33486 commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
33487 Author: Dave Liu <r63238@freescale.com>
33488 Date: Wed Aug 1 15:00:59 2007 +0800
33490 mpc83xx: Correct the README for DDR ECC
33492 Update the README for DDR ECC, change the name
33493 to README.mpc83xx.ddrecc.
33495 Signed-off-by: Dave Liu <daveliu@freescale.com>
33496 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33498 commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
33499 Author: Dave Liu <r63238@freescale.com>
33500 Date: Wed Aug 1 15:00:15 2007 +0800
33502 mpc83xx: Consolidate the ECC support of 83xx
33504 Remove the duplicated source code of ecc command on the <board>.c,
33505 for reused, move these code to cpu/mpc83xx directory.
33507 Signed-off-by: Dave Liu <daveliu@freescale.com>
33508 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33510 commit 036575c544cf1b69654d8fb334bda69c6ff3da36
33511 Author: Dave Liu <r63238@freescale.com>
33512 Date: Sat Aug 4 13:37:39 2007 +0800
33514 mpc83xx: Correct the burst length for DDR2 with 32 bits
33516 The burst length should be 4 for DDR2 with 32 bits bus
33518 Signed-off-by: Dave Liu <daveliu@freescale.com>
33520 commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
33521 Author: Kim Phillips <kim.phillips@freescale.com>
33522 Date: Wed Jul 25 19:25:33 2007 -0500
33524 mpc83xx: add support for the MPC8323E RDB
33526 MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
33527 five 10/100 ethernet ports connected via an ICPlus IP175C
33528 switch, one PCI slot, and serial. Features not supported
33529 in this patch are SD card interface, 2 USB ports, and the
33532 Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
33533 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33535 commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
33536 Author: Kim Phillips <kim.phillips@freescale.com>
33537 Date: Wed Jul 25 19:25:28 2007 -0500
33539 mpc83xx: fixup generic pci for libfdt
33541 add libfdt support to the generic 83xx pci code
33543 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33545 commit f57ac7a7b37109245b69db80839ebee26179966a
33546 Author: Kim Phillips <kim.phillips@freescale.com>
33547 Date: Wed Jul 25 19:25:22 2007 -0500
33549 mpc83xx: fix 8360 and cpu functions to update fdt being passed
33551 ..and not the global fdt. Rename local fdt vars to blob so as not to
33552 be confused with the global var with the same three-letter name.
33554 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33556 commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
33557 Author: Jerry Van Baren <gvb.uboot@gmail.com>
33558 Date: Wed Jul 4 21:34:24 2007 -0400
33560 mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
33562 Several node strings were not correct (trailing slashes and properties
33564 Added setting of the timebase-frequency.
33565 Improved error messages and use debug() instead of printf().
33567 Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
33568 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33570 commit 26d02c9bbac1751c5e19294f000100b48d43a920
33571 Author: Jerry Van Baren <gvb.uboot@gmail.com>
33572 Date: Wed Jul 4 21:27:30 2007 -0400
33574 mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
33576 The new name matches more closely the kernel's name, which is also
33577 a much better description.
33579 These are the mpc83xx changes made necessary by the function name change.
33581 Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
33582 Acked-by: Gerald Van Baren <vanbaren@cideas.com>
33583 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33585 commit 9be39a67c9f8fef7107f5df09d673005f04d0963
33586 Author: Dave Liu <daveliu@freescale.com>
33587 Date: Mon Jun 25 10:41:56 2007 +0800
33589 mpc83xx: Add support for the display of reset status
33591 83xx processor family has many reset sources, such as
33592 power on reset, software hard reset, software soft reset,
33593 JTAG, bus monitor, software watchdog, check stop reset,
33594 external hard reset, external software reset.
33595 sometimes, to figure out the fault of system, we need to
33596 know the cause of reset early before the prompt of
33599 Signed-off-by: Dave Liu <daveliu@freescale.com>
33600 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33602 commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
33603 Author: Dave Liu <daveliu@freescale.com>
33604 Date: Mon Jun 25 10:41:04 2007 +0800
33606 mpc83xx: Fix the align bug of SDMA buffer
33608 According to the latest user manual, the SDMA temporary
33609 buffer base address must be 4KB aligned.
33611 Signed-off-by: Dave Liu <daveliu@freescale.com>
33612 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33614 commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
33615 Author: Dave Liu <daveliu@freescale.com>
33616 Date: Mon Jun 25 13:21:12 2007 +0800
33618 mpc83xx: Revise the MPC8360EMDS readme doc
33620 When the rev2.x silicon mount on the MPC8360EMDS baord,
33621 and if you are using the u-boot version after the commit
33622 3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
33623 to make the ethernet interface usable, we have to setup
33624 the jumpers correctly.
33626 Signed-off-by: Dave Liu <daveliu@freescale.com>
33627 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33629 commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
33630 Author: Timur Tabi <timur@freescale.com>
33631 Date: Tue Jul 3 13:46:32 2007 -0500
33633 FSL I2C driver programs the two I2C busses differently
33635 The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
33636 The second I2C bus has its slave address programmed incorrectly and is
33637 missing a 5-us delay.
33639 Signed-off-by: Timur Tabi <timur@freescale.com>
33640 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33642 commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
33643 Author: Timur Tabi <timur@freescale.com>
33644 Date: Tue Jul 3 13:04:34 2007 -0500
33646 Update SCCR programming in cpu_init_f() to support all 83xx processors
33648 Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
33649 bitfields for all 83xx processors. The code to update some bitfields was
33650 compiled only on some processors. Now, the bitfields are programmed as long
33651 as the corresponding CFG_SCCR option is defined in the board header file.
33652 This means that the board header file should not define any CFG_SCCR macros
33653 for bitfields that don't exist on that processor, otherwise the SCCR will be
33654 programmed incorrectly.
33656 Signed-off-by: Timur Tabi <timur@freescale.com>
33657 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33659 commit 9546266999f0b9b51372636614211b88d90f0f25
33660 Author: Martin Krause <martin.krause@tqs.de>
33661 Date: Fri Jun 22 13:04:22 2007 +0200
33663 TQM834x: cleanup configuraton
33665 Remove irritating #undef DEBUG
33667 Signed-off-by: Martin Krause <martin.krause@tqs.de>
33668 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33670 commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
33671 Author: david.saada <David.Saada@ecitele.com>
33672 Date: Mon Jun 18 09:09:53 2007 -0700
33674 MPC83xx: Fix makefile to generate config.h file in the build directory
33676 MPC83xx: Fix the Makefile config sections to generate the include/config.h
33677 file in the build directory instead of the source directory.
33679 Signed-off-by: David Saada <david.saada@ecitele.com>
33680 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33682 commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
33683 Author: Lee Nipper <Lee.Nipper@freescale.com>
33684 Date: Thu Jun 14 20:07:33 2007 -0500
33686 mpc83xx: Add support for 8360 silicon revision 2.1
33688 This change adds 8360 silicon revision 2.1 support to u-boot.
33690 Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
33691 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33693 commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
33694 Author: Kumar Gala <galak@kernel.crashing.org>
33695 Date: Wed Aug 8 04:14:28 2007 -0500
33697 Treat ppc64 host as ppc
33699 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
33701 commit 0dc4279b08ff82472bec2e2c90858602459febe8
33702 Author: Jason Jin <Jason.jin@freescale.com>
33703 Date: Wed Aug 8 09:01:46 2007 +0800
33705 Minor fix for bios emulator makefile
33707 Add $(obj) to LIB avoiding objects be built in the source dir
33709 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33711 commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
33712 Author: Jason Jin <Jason.jin@freescale.com>
33713 Date: Wed Aug 8 08:33:11 2007 +0800
33715 Add CONFIG_BIOSEMU define to guard all the bios emulator code
33717 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33719 This patch fix the compile issue on the board that did not enable the bios emulator
33721 commit ed8106433522f2ea8933e9808346860d061d7731
33722 Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
33723 Date: Tue Jul 31 12:27:25 2007 -0500
33725 tsec: fix multiple PHY support
33727 The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
33728 broke multiple PHY support in tsec.c. This fixes it.
33730 Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
33731 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
33733 commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
33734 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
33735 Date: Thu Aug 9 09:08:18 2007 -0500
33737 tsec: Allow Ten Bit Interface address to be configurable
33739 Allow the address of the Ten Bit Interface (TBI) to be changed in the
33740 event of a conflict with another device.
33742 Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
33744 commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
33745 Author: Stefan Roese <sr@denx.de>
33746 Date: Wed Aug 8 09:54:26 2007 +0200
33748 Coding style cleanup
33750 Signed-off-by: Stefan Roese <sr@denx.de>
33752 commit a41de1f0d373e09c782dea558385a06247111ba5
33753 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33754 Date: Sun Aug 5 05:15:18 2007 -0500
33756 Port enabled for I2C signals and chipselects port configuration.
33758 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33760 commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
33761 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33762 Date: Sun Aug 5 04:31:18 2007 -0500
33766 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33768 commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
33769 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33770 Date: Sun Aug 5 04:11:20 2007 -0500
33774 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33776 commit 99c03c175d2689093176facf17c58ce2cb320001
33777 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33778 Date: Sun Aug 5 03:58:52 2007 -0500
33780 Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
33782 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33784 commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
33785 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33786 Date: Sun Aug 5 03:55:21 2007 -0500
33788 Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
33790 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33792 commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
33793 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33794 Date: Sun Aug 5 03:43:30 2007 -0500
33796 Moved sync() from board file to include/asm-m68k/io.h
33798 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33800 commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
33801 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33802 Date: Sun Aug 5 03:30:44 2007 -0500
33804 Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
33806 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33808 commit 9998bd37ead85e93953559720710d3b0685c81e6
33809 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33810 Date: Sun Aug 5 03:19:10 2007 -0500
33812 Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
33814 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
33816 commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
33817 Author: Jason Jin <Jason.jin@freescale.com>
33818 Date: Tue Aug 7 16:17:06 2007 +0800
33820 Add CONFIG_BIOSEMU define to guard all the bios emulator code
33822 This patch fix the compile issue on the board that did not enable the bios emulator
33824 commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
33825 Author: Wolfgang Denk <wd@denx.de>
33826 Date: Tue Aug 7 16:02:13 2007 +0200
33828 Fix missing brace error in fs/fat/fat.c
33829 [pointed out by Roderik Wildenburg]
33831 Signed-off-by: Wolfgang Denk <wd@denx.de>
33833 commit 706714d97a0d08d59eda4de2268c39f504688329
33834 Author: Michal Simek <monstr@monstr.eu>
33835 Date: Mon Aug 6 23:41:53 2007 +0200
33837 [FIX] remove cute code
33839 commit f500d9fdeb576288656dac427052ad2c5ca0ad1a
33840 Author: Michal Simek <monstr@monstr.eu>
33841 Date: Mon Aug 6 23:35:26 2007 +0200
33843 [FIX] Fix romfs code
33845 commit ab4b956d3143f8f8174089053f5dfabbb04762b0
33846 Author: Michal Simek <monstr@monstr.eu>
33847 Date: Mon Aug 6 23:31:49 2007 +0200
33849 [FIX] Coding style cleanup - Wolfgang's suggestions
33851 commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
33852 Author: Wolfgang Denk <wd@denx.de>
33853 Date: Mon Aug 6 23:21:05 2007 +0200
33855 Fixed typo in README (pointed out by Martin Jost).
33857 Signed-off-by: Wolfgang Denk <wd@denx.de>
33859 commit 537223afa61f64480df31ce440a9cb386df4a814
33860 Author: Stefan Roese <sr@denx.de>
33861 Date: Mon Aug 6 21:10:17 2007 +0200
33863 ppc4xx: Update AMCC Bamboo README doc/README.bamboo
33865 As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
33866 here an updated Bamboo README.
33868 Signed-off-by: Stefan Roese <sr@denx.de>
33870 commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
33871 Author: Wolfgang Denk <wd@denx.de>
33872 Date: Mon Aug 6 02:17:36 2007 +0200
33874 Coding style cleanup. Update CHANGELOG.
33876 Signed-off-by: Wolfgang Denk <wd@denx.de>
33878 commit 221838cc7eb178370ff62aa05920a582e12ac322
33879 Author: Jason Jin <Jason.jin@freescale.com>
33880 Date: Tue Jul 10 09:03:22 2007 +0800
33882 Remove the bios emulator from MAI board.
33884 The bios emulator in the MAI board can not pass compile
33885 and have a lot of crap in it. remove it and will have a
33886 clean and small bios emulator in the drivers directory
33887 which can be uesed for every board.
33889 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33891 commit 5618332409bb96f4448d1712899369fc80c0b489
33892 Author: Jason Jin <Jason.jin@freescale.com>
33893 Date: Fri Jul 13 12:14:59 2007 +0800
33895 Fix some compile issues for MAI board.
33897 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33899 commit 0f460a1ee148b648ee242c3157650287d4296260
33900 Author: Jason Jin <Jason.jin@freescale.com>
33901 Date: Fri Jul 13 12:14:58 2007 +0800
33903 Configurations for ATI video card BIOS emulator
33905 This patch add definition of the BIOS emulator and the ATI framebuffer
33906 driver for MPC8641HPCN board.
33908 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33909 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33911 commit ece92f85053b8df613edcf05b26a416cbc3d629c
33912 Author: Jason Jin <Jason.jin@freescale.com>
33913 Date: Fri Jul 6 08:34:56 2007 +0800
33915 This is a BIOS emulator, porting from SciTech for u-boot, mainly for
33916 ATI video card BIOS. and can be used for x86 code emulation by some
33919 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33921 commit 5072188acabde3178fac7f5a597150e6e74fd40c
33922 Author: Jason Jin <Jason.jin@freescale.com>
33923 Date: Fri Jul 6 08:33:33 2007 +0800
33925 This is a framebuffer driver for ATI video card, can work for PCI9200,
33926 X300, X700, X800 ATI video cards.
33928 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33929 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
33931 commit 5728be389e65fd47f34b33c2596271eb4db751ae
33932 Author: Wolfgang Denk <wd@denx.de>
33933 Date: Mon Aug 6 01:01:49 2007 +0200
33935 Coding style cleanup. Update CHANGELOG.
33937 Signed-off-by: Wolfgang Denk <wd@denx.de>
33939 commit 8092fef4c29b395958bb649647da7e3775731517
33940 Author: Martin Krause <Martin.Krause@tqs.de>
33941 Date: Tue Dec 12 14:26:01 2006 +0100
33943 Add functions to list of exported functions
33945 Additionally export the following fuctions (to make trab_config build again):
33949 Also bump the ABI version to reflect this change
33951 Signed-off-by: Martin Krause <martin.krause@tqs.de>
33953 commit 63cec5814fab5d2b1c86982327433807a5ac0249
33954 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
33955 Date: Thu Aug 2 14:09:49 2007 -0500
33957 Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
33959 All of the PCI/PCI-Express driver and initialization code that
33960 was in the MPC8641HPCN port has now been moved into the common
33961 drivers/fsl_pci_init.c. In a subsequent patch, this will be
33962 utilized by the 85xx ports as well.
33964 Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
33966 Also enable the second PCI-Express controller on 8641
33967 by getting its BATS and CFG_ setup right.
33969 Fixed a u16 vendor compiler warning in AHCI driver too.
33971 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
33972 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
33973 Signed-off-by: Jon Loeliger <jdl@freescale.com>
33975 commit a274ca4f6d68830e7c916f897561cff8c4101c38
33976 Author: Michal Simek <monstr@monstr.eu>
33977 Date: Sun Aug 5 22:33:05 2007 +0200
33979 [FIX] Coding style cleanup
33981 commit af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f
33982 Author: Michal Simek <monstr@monstr.eu>
33983 Date: Sun Aug 5 16:13:31 2007 +0200
33985 [FIX] Xilinx Uartlite driver
33986 Because PPC405 can use UARTLITE serial interface and
33987 Microblaze can use Uart16550 serial interface not only Uartlite.
33989 commit 98889edd50aadf862071eb5664747ad0d568a20e
33990 Author: Michal Simek <monstr@monstr.eu>
33991 Date: Sun Aug 5 15:54:53 2007 +0200
33993 [FIX] Change configuration for XUPV2P Microblaze board
33995 commit 537091b4eed9302865d03fef3f7212b4fe5cf28f
33996 Author: Michal Simek <monstr@monstr.eu>
33997 Date: Sun Aug 5 15:53:50 2007 +0200
33999 [PATCH] Added support for Xilinx Emac community driver
34001 commit 86b116b1b1e165ca4840daefed36d2e3b8460173
34002 Author: Bartlomiej Sieka <tur@semihalf.com>
34003 Date: Fri Aug 3 12:08:16 2007 +0200
34005 cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
34007 Add the ability for modules from the Schindler cm5200 family to use a
34008 single U-Boot image:
34009 - rename cm1_qp1 to cm5200
34010 - add run-time module detection
34011 - parametrize SDRAM configuration according to the module we are running on
34013 Few minor, board-specific fixes included in this patch:
34014 - better MAC address handling
34015 - updated default environment ('update' command uses +{filesize} now)
34016 - improved error messages in the auto-update code
34017 - allow booting U-Boot from RAM (CFG_RAMBOOT)
34019 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34020 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
34021 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34023 commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
34024 Author: Andy Fleming <afleming@freescale.com>
34025 Date: Fri Aug 3 04:05:25 2007 -0500
34027 Add Marvell 1149 PHY support to the TSEC
34029 commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
34030 Author: Wolfgang Denk <wd@denx.de>
34031 Date: Thu Aug 2 21:27:46 2007 +0200
34033 Coding style cleanup, update CHANGELOG
34035 Signed-off-by: Wolfgang Denk <wd@denx.de>
34037 commit 63e22764d2f8653f68888c667eb65b3996b52680
34038 Author: Wolfgang Denk <wd@denx.de>
34039 Date: Thu Aug 2 10:11:18 2007 +0200
34041 Minor cleanup of <board>_nand build rules.
34043 commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
34044 Author: Stefan Roese <sr@denx.de>
34045 Date: Thu Aug 2 08:33:56 2007 +0200
34047 ppc4xx: Code cleanup
34049 Signed-off-by: Stefan Roese <sr@denx.de>
34051 commit c92409812206ac67a7fa7aae298539a9c3804a46
34052 Author: Grzegorz Bernacki <gjb@semihalf.com>
34053 Date: Tue Jul 31 18:51:48 2007 +0200
34055 [ppc440SPe] Graceful recovery from machine check during PCIe configuration
34057 During config transactions on the PCIe bus an attempt to scan for a
34058 non-existent device can lead to a machine check exception with certain
34059 peripheral devices. In order to avoid crashing in such scenarios the
34060 instrumented versions of the config cycle read routines are introduced, so
34061 the exceptions fixups framework can gracefully recover.
34063 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34064 Acked-by: Rafal Jaworowski <raj@semihalf.com>
34066 commit dec99558b9ea75a37940d07f41a3565a50b54ad1
34067 Author: Rafal Jaworowski <raj@semihalf.com>
34068 Date: Tue Jul 31 18:19:54 2007 +0200
34070 [ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
34072 This brings back separate settings for PCIe bus numbers depending on chip
34073 revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
34074 commit. 440SPe rev. A does NOT work properly with the same settings as for
34075 the rev. B (no devices are seen on the bus during enumeration).
34077 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34079 commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
34080 Author: Wolfgang Denk <wd@denx.de>
34081 Date: Thu Aug 2 00:48:45 2007 +0200
34083 Fix build errors and warnings / code cleanup.
34085 Signed-off-by: Wolfgang Denk <wd@denx.de>
34087 commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
34088 Author: Eugene OBrien <eugene.obrien@advantechamt.com>
34089 Date: Tue Jul 31 10:24:56 2007 +0200
34091 ppc4xx: Update AMCC Bamboo 440EP support
34093 Changed storage type of cfg_simulate_spd_eeprom to const
34094 Changed storage type of gpio_tab to stack storage
34095 (Cannot access global data declarations in .bss until afer code relocation)
34097 Improved SDRAM tests to catch problems where data is not uniquely addressable
34098 (e.g. incorrectly programmed SDRAM row or columns)
34100 Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
34101 Fixed AM29LV320DT (OpCode Flash) sector map
34103 Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
34104 Signed-off-by: Stefan Roese <sr@denx.de>
34106 commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
34107 Author: Stefan Roese <sr@denx.de>
34108 Date: Tue Jul 31 08:37:01 2007 +0200
34110 ppc4xx: Update 440EPx lwmon5 board support
34112 - Clear ECC status regs after ECC POST test
34113 - Set dcbz for ECC generation with caches enabled as default
34116 Signed-off-by: Stefan Roese <sr@denx.de>
34118 commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
34119 Author: Stefan Roese <sr@denx.de>
34120 Date: Mon Jul 30 11:04:57 2007 +0200
34122 ppc4xx: Only print ECC related info when the error bis are set
34124 Signed-off-by: Stefan Roese <sr@denx.de>
34126 commit e36220a4baf1f188ba60f17e9d0f043069b1362a
34127 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
34128 Date: Fri Jul 27 16:44:31 2007 +0200
34130 new FPGA image for PLU405 board
34132 new FPGA image for PLU405 board with improved CompactFlash timing
34134 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
34136 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
34137 Author: Rafal Jaworowski <raj@semihalf.com>
34138 Date: Fri Jul 27 14:43:59 2007 +0200
34140 [ADS5121] Support for the ADS5121 board
34142 The following MPC5121e subsystems are supported:
34144 - low-level CPU init
34145 - NOR Boot Flash (common CFI driver)
34151 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
34152 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34153 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
34155 commit 1863cfb7b100ba0ee3401799457a01dc058745f8
34156 Author: Rafal Jaworowski <raj@semihalf.com>
34157 Date: Fri Jul 27 14:22:04 2007 +0200
34159 [PPC] Remove unused MSR_USER definition
34161 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34163 commit d4024bb72dd81695ec099b2199eda0d27c623e62
34164 Author: John Otken <john@softadvances.com>
34165 Date: Thu Jul 26 17:49:11 2007 +0200
34167 ppc4xx: Add support for AMCC 405EP Taihu board
34169 Signed-off-by: John Otken <john@softadvances.com>
34171 commit b66091de6c7390620312c2501db23d8391e7cabb
34172 Author: Anatolij Gustschin <agust@denx.de>
34173 Date: Thu Jul 26 15:08:01 2007 +0200
34175 ppc4xx: lwmon5: Update Lime initialization
34177 Change Lime SDRAM initialization to now support 100MHz and
34178 133MHz (if enabled). Also the framebuffer is initialized to
34179 display a blue rectangle with a white border.
34181 Signed-off-by: Anatolij Gustschin <agust@denx.de>
34182 Signed-off-by: Stefan Roese <sr@denx.de>
34184 commit 9f24a808f17fc0f37b7fb4805f734741335caecc
34185 Author: Stefan Roese <sr@denx.de>
34186 Date: Tue Jul 24 09:52:52 2007 +0200
34188 ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
34190 The used Intel NOR FLASH chips have internally two dies, and are now
34191 treated as two seperate chips.
34193 Signed-off-by: Stefan Roese <sr@denx.de>
34195 commit aedf5bde179ecfbd0a96130d18996a96518b785f
34196 Author: Stefan Roese <sr@denx.de>
34197 Date: Tue Jul 24 07:20:09 2007 +0200
34199 ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
34201 As suggested by Hakan Eryigit, here an updated setup for the lwmon5
34202 interrupt controller.
34204 Signed-off-by: Stefan Roese <sr@denx.de>
34206 commit a71d96eac8130b53a91f93cd10c70fca0db18d52
34207 Author: Stefan Roese <sr@denx.de>
34208 Date: Fri Jul 20 15:03:44 2007 +0200
34210 ppc4xx: Fix bug with default GPIO output value
34212 As spotted by Matthias Fuchs, the default output values for all GPIO1
34213 outputs were not setup correctly. This patch fixes this issue.
34215 Signed-off-by: Stefan Roese <sr@denx.de>
34217 commit 531e3e8b831f357056448fa573137d5fb37000fd
34218 Author: Pavel Kolesnikov <concord@emcraft.com>
34219 Date: Fri Jul 20 15:03:03 2007 +0200
34221 POST: Add ECC POST for the lwmon5 board
34223 This patch adds ECC Post test for the Lwmon5 board based
34224 on PPC440EPx to U-Boot.
34226 Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
34227 Acked-by: Yuri Tikhonov <yur@emcraft.com>
34228 Acked-by: Stefan Roese <sr@denx.de>
34230 commit cc3023b9f95d7ac959a764471a65001062aecf41
34231 Author: Rafal Jaworowski <raj@semihalf.com>
34232 Date: Thu Jul 19 17:12:28 2007 +0200
34234 Fix breakage of 8xx boards from recent commit.
34236 This patch fixes the negative consequences for 8xx of the recent
34237 "ppc4xx: Clean up 440 exceptions handling" commit.
34239 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
34241 commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
34242 Author: Stefan Roese <sr@denx.de>
34243 Date: Mon Jul 16 13:11:12 2007 +0200
34245 Coding style cleanup
34247 Signed-off-by: Stefan Roese <sr@denx.de>
34249 commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
34250 Author: Stefan Roese <sr@denx.de>
34251 Date: Mon Jul 16 10:02:12 2007 +0200
34253 ppc4xx: Code cleanup
34255 Signed-off-by: Stefan Roese <sr@denx.de>
34257 commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
34258 Author: Stefan Roese <sr@denx.de>
34259 Date: Mon Jul 16 10:01:38 2007 +0200
34261 ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
34263 Signed-off-by: Stefan Roese <sr@denx.de>
34265 commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
34266 Author: Stefan Roese <sr@denx.de>
34267 Date: Mon Jul 16 10:00:43 2007 +0200
34269 ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
34271 The new boardspecific DDR2 controller configuration is used for the Yucca
34272 board. Now the Yucca board with 440SPe Rev. A chips is also supported.
34274 Signed-off-by: Stefan Roese <sr@denx.de>
34276 commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
34277 Author: Stefan Roese <sr@denx.de>
34278 Date: Mon Jul 16 09:57:00 2007 +0200
34280 ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
34282 The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
34283 support non default, boardspecific DDR(2) controller configuration.
34285 Signed-off-by: Stefan Roese <sr@denx.de>
34287 commit 5743a9207a370b90f09b20ebd61167c806b937f3
34288 Author: Stefan Roese <sr@denx.de>
34289 Date: Mon Jul 16 08:53:51 2007 +0200
34291 ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
34293 The new function remove_tlb() can be used to remove the TLB's used to
34294 map a specific memory region. This is especially useful for the DDR(2)
34295 setup routines which configure the SDRAM area temporarily as a cached
34296 area (for speedup on auto-calibration and ECC generation) and later
34297 need this area uncached for normal usage.
34299 Signed-off-by: Stefan Roese <sr@denx.de>
34301 commit 0c0a9cda1bde37106520476ed486bd67eb8d30ae
34302 Author: Michal Simek <monstr@monstr.eu>
34303 Date: Mon Jul 16 00:31:07 2007 +0200
34305 [PATCH] Support for Xilinx EmacLite controller
34307 commit 3a6cab844cf74f76639d795e0be8717e02c86af7
34308 Author: Wolfgang Denk <wd@denx.de>
34309 Date: Sat Jul 14 22:51:02 2007 +0200
34313 Signed-off-by: Wolfgang Denk <wd@denx.de>
34315 commit 5280f352c8da33b1d7fbf448768717d9e16ff9a1
34316 Author: Michal Simek <monstr@monstr.eu>
34317 Date: Sat Jul 14 13:11:28 2007 +0200
34319 [FIX] support for simply measuring time
34321 commit 91bb4ca665d2e0cf7f60c4b5b370990250ec0c43
34322 Author: Michal Simek <monstr@monstr.eu>
34323 Date: Sat Jul 14 12:41:23 2007 +0200
34325 [FS] Added support for ROMFS
34327 commit 011595307731a7a67a7445d107c279d031e8ab97
34328 Author: Heiko Schocher <hs@pollux.denx.de>
34329 Date: Sat Jul 14 01:06:58 2007 +0200
34331 [PCS440EP] - fix compile error, if BUILD_DIR is used
34333 commit 5a2f1098d81ad58b309e5e558d0492643166a799
34334 Author: Michal Simek <monstr@monstr.eu>
34335 Date: Sat Jul 14 00:18:48 2007 +0200
34337 [PATCH] Support time without timer
34339 commit a476ca2ac2217ddd05a2bf0c514075814b10a3c0
34340 Author: Michal Simek <monstr@monstr.eu>
34341 Date: Fri Jul 13 21:43:55 2007 +0200
34343 [PATCH] Remove problem with disabled BARREL SHIFTER
34345 commit 55e26ad62107d2f14f757de3ae0b14b9aa7aed94
34346 Author: Michal Simek <monstr@monstr.eu>
34347 Date: Fri Jul 13 21:41:44 2007 +0200
34349 [FIX] correct help for rspr
34351 commit fad63407154f46246ce80d53a9c669a44362ac67
34352 Author: Heiko Schocher <hs@pollux.denx.de>
34353 Date: Fri Jul 13 09:54:17 2007 +0200
34355 make show_boot_progress () weak.
34357 Signed-off-by: Heiko Schocher <hs@denx.de>
34359 commit 907902472391b6ca1876ec300687562ecaf459b1
34360 Author: Heiko Schocher <hs@pollux.denx.de>
34361 Date: Fri Jul 13 08:26:05 2007 +0200
34363 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
34364 - fix compile error, if BUILD_DIR is used
34366 Signed-off-by: Heiko Schocher <hs@denx.de>
34368 commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
34369 Author: Stefan Roese <sr@denx.de>
34370 Date: Thu Jul 12 16:32:08 2007 +0200
34372 ppc4xx: Change receive buffer handling in the 4xx emac driver
34374 This change fixes a bug in the receive buffer handling, that
34375 could lead to problems upon high network traffic (broadcasts...).
34377 Signed-off-by: Stefan Roese <sr@denx.de>
34379 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
34380 Author: Wolfgang Denk <wd@denx.de>
34381 Date: Thu Jul 12 01:45:34 2007 +0200
34383 Update CHANGELOG, minor coding style cleanup.
34385 Signed-off-by: Wolfgang Denk <wd@denx.de>
34387 commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
34388 Author: Andy Fleming <afleming@freescale.com>
34389 Date: Fri Jun 8 16:41:18 2007 -0500
34391 Remove erroneous errata code from Marvel 88E1111S driver
34393 The Marvel 88E1111S driver for the TSEC was copied from the
34394 88E1101 driver, and included a fix for an erratum which does not
34395 exist on that part. Now it is removed
34397 Signed-off-by: Andy Fleming <afleming@freescale.com>
34399 commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
34400 Author: Andy Fleming <afleming@freescale.com>
34401 Date: Tue Jun 5 16:38:44 2007 -0500
34403 From: eran liberty <eran.liberty@gmail.com>
34405 adds the reset register to 85xx immap
34407 Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
34408 Signed-off-by: Andy Fleming <afleming@freescale.com>
34410 commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
34411 Author: Andy Fleming <afleming@freescale.com>
34412 Date: Thu May 10 17:50:01 2007 -0500
34414 Polished the 85xx ADS config files
34416 Made the boot commands use device trees by default.
34417 Also moved the ramdisk to 1000000 (I think the previous address
34418 was getting overridden during boot).
34420 Signed-off-by: Andy Fleming <afleming@freescale.com>
34422 commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
34423 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34424 Date: Wed May 9 11:03:32 2007 -0500
34426 8544ds: Fix Makefile after moving pixis to board/freescale.
34428 The OBJTREE != SRCTREE build scenario was broken.
34431 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34432 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34434 commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
34435 Author: Andy Fleming <afleming@freescale.com>
34436 Date: Wed May 9 00:54:20 2007 -0500
34438 tsec: Fix PHY code to match first driver
34440 Jarrold Wen noticed that the generic PHY code always matches
34441 under the current implementation. Change it so the first match
34442 wins, and *only* unknown PHYs trigger the generic driver
34444 Signed-off-by: Andy Fleming <afleming@freescale.com>
34446 commit ccc091aac61a38cd998d575d92f7232e256d6312
34447 Author: Andy Fleming <afleming@freescale.com>
34448 Date: Tue May 8 17:27:43 2007 -0500
34450 Add support for CPM device tree configuration to 8560 ADS
34452 * Adds code to modify CPM frequencies
34453 * Cleans up the config file to #define TSEC and (for now) #undef FCC
34454 * Adds the MII command for all 8560 ADS configurations
34455 * Updates config file to provide convenience commands for booting
34458 Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
34459 Signed-off-by: Andy Fleming <afleming@freescale.com>
34461 commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
34462 Author: Andy Fleming <afleming@freescale.com>
34463 Date: Tue May 8 17:23:02 2007 -0500
34465 Fix Marvell 88e1145 PHY init code
34467 Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
34468 where the reset was being done after the errata code instead of
34471 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
34472 Signed-off-by: Andy Fleming <afleming@freescale.com>
34474 commit 5dc210dec5bace98a50b6ba905347890091a9bb0
34475 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34476 Date: Wed Jul 11 14:52:16 2007 -0500
34478 Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
34480 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34482 commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
34483 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34484 Date: Wed Jul 11 14:52:08 2007 -0500
34486 pciauto setup bridge
34488 The P2P bridge bus numbers programmed into the device are relative to
34491 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34493 commit 571f49fa717004ca4268b4e24057efc7bf9f987b
34494 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34495 Date: Wed Jul 11 14:52:01 2007 -0500
34497 Support PCIe extended config registers
34499 FSL PCIe block has extended cfg registers in the 100 and 400 range.
34500 For example, to read the LTSSM register: pci display <busn>.0 404 1
34502 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34504 commit ba5feb12581bb2912ce301e4866b71f846e9fc07
34505 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34506 Date: Wed Jul 11 14:51:48 2007 -0500
34508 Minor improvements to drivers/pci_auto.c
34510 - Make pciauto_{pre,post}scan_setup_bridge non-static
34511 - Added physical address display in debug messages.
34513 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34515 commit 40e81addab7bb74d20ddf681ce9babc880a828ee
34516 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
34517 Date: Wed Jul 11 14:51:35 2007 -0500
34519 Start pci hose scan from hose->current_busno.
34521 Ensure hose->current_busno is not less than first_busno. This fixes
34522 broken board code which leaves current_busno=0 when first_busno is
34523 greater than 0 for the cases with multiple controllers.
34525 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
34527 commit 3865b1fb7843a08ad49a6319a36415752276ff48
34528 Author: Stefan Roese <sr@denx.de>
34529 Date: Wed Jul 11 12:13:53 2007 +0200
34531 Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
34533 Signed-off-by: Stefan Roese <sr@denx.de>
34535 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
34536 Author: Bartlomiej Sieka <tur@semihalf.com>
34537 Date: Wed Jul 11 20:11:07 2007 +0200
34539 CM1.QP1: Support for the Schindler CM1.QP1 board.
34541 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
34542 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
34544 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
34545 Author: Heiko Schocher <hs@pollux.denx.de>
34546 Date: Wed Jul 11 18:39:11 2007 +0200
34548 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
34549 - now the Flash ST M29W040B is supported (not tested)
34550 - fix the "led" command
34551 - fix compile error, if BUILD_DIR is used
34553 Signed-off-by: Heiko Schocher <hs@denx.de>
34555 commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
34556 Author: Stefan Roese <sr@denx.de>
34557 Date: Sun Jul 8 13:44:27 2007 +0200
34559 Fix malloc problem introduced with the relocation fixup for the PPC platform
34561 The relocation fixup didn't handle the malloc pointer initialization
34562 correctly. This patch fixes this problem. Tested successfully on 4xx.
34563 The relocation fixup patches for 4xx will follow soon.
34565 Signed-off-by: Stefan Roese <sr@denx.de>
34567 commit 0dca874db62718e41253659e60f3a1de7eb418ce
34568 Author: TsiChung <tcliew@Goku.(none)>
34569 Date: Tue Jul 10 15:45:43 2007 -0500
34571 Cache update and added CFG_UNIFY_CACHE
34573 Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
34575 Signed-off-by: TsiChung <tcliew@Goku.(none)>
34577 commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
34578 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34579 Date: Thu Jul 5 23:36:16 2007 -0500
34581 Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
34583 Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
34585 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34587 commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
34588 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34589 Date: Thu Jul 5 23:31:25 2007 -0500
34591 Update header files
34593 Include immap.h and renamed mcfrtc.h to rtc.h
34595 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34597 commit 2870e98ac8e5553e9187b12a47e5f46babb53990
34598 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34599 Date: Thu Jul 5 23:29:21 2007 -0500
34601 Add mcffec_initialize()
34603 Added mcffec_initialize() in eth_initialize()
34605 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34607 commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
34608 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34609 Date: Thu Jul 5 23:27:40 2007 -0500
34611 Update header file and clean up
34615 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34617 commit 0cee9c66318602c856a899ae5fa7579ccba6443a
34618 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34619 Date: Thu Jul 5 23:23:15 2007 -0500
34621 New uart structure and defines
34623 Seperated from mcfuart.h
34625 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34627 commit a90e79de8d99e9c9d69d60bfff9f24c337165900
34628 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34629 Date: Thu Jul 5 23:22:31 2007 -0500
34631 New timer structure and defines
34633 Seperated from mcftimer.h
34635 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34637 commit e04acb2eba4782489417240eff76e20e176aec10
34638 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34639 Date: Thu Jul 5 23:21:09 2007 -0500
34641 Rename mcfrtc to rtc
34643 Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
34645 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34647 commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
34648 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34649 Date: Thu Jul 5 23:17:36 2007 -0500
34651 Rename mcfserial.c. Update include header
34653 Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
34655 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34657 commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
34658 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34659 Date: Thu Jul 5 23:13:58 2007 -0500
34661 Header file update, clean up and cache handling
34663 Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
34665 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34667 commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
34668 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34669 Date: Thu Jul 5 23:10:40 2007 -0500
34671 Create interrupts.c and modify Makefile
34673 interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
34675 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34677 commit ddd104f1ed655eda50c06ba636237a83ed943f34
34678 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34679 Date: Thu Jul 5 23:06:55 2007 -0500
34683 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34685 commit b9bf3de377b2bae70c983c9b97feae914999e735
34686 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34687 Date: Thu Jul 5 23:05:31 2007 -0500
34689 Update header file and some clean up
34691 Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
34693 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34695 commit 84a015b52ec820a5ae173717d78516de731c89c2
34696 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34697 Date: Thu Jul 5 23:03:28 2007 -0500
34699 Update header file and enable icache
34701 Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
34703 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34705 commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
34706 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34707 Date: Thu Jul 5 23:01:22 2007 -0500
34709 Update header file and removed interrupt_init()
34711 Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
34713 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34715 commit 3b635492c95bd0d6e08f93f699821cba1f602a64
34716 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34717 Date: Thu Jul 5 22:57:46 2007 -0500
34719 Update for flash.o and mii.o
34721 Removed flash.o and added mii.o
34723 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34725 commit c5ded275d839e4ff79f41718d50a835d989f57bc
34726 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34727 Date: Thu Jul 5 22:56:19 2007 -0500
34729 MII functions calls.
34731 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34733 commit 427c814104560e29bda14955c67703245aaaa5b4
34734 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34735 Date: Thu Jul 5 22:54:42 2007 -0500
34737 Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
34739 The removed MII routines will be placed in mii.c.
34741 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34743 commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
34744 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34745 Date: Thu Jul 5 22:51:05 2007 -0500
34749 There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
34751 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34753 commit 2744354a8437b8f78db178e30660215688bff570
34754 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34755 Date: Thu Jul 5 22:46:38 2007 -0500
34757 Seperate old structure defines and new structure defines
34759 Removed new uart structure and defines to uart.h
34761 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34763 commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
34764 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34765 Date: Thu Jul 5 22:45:01 2007 -0500
34767 Seperate old structure defines and new structure defines
34769 New timer structure and defines will move to new timer.h
34771 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34773 commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
34774 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34775 Date: Thu Jul 5 22:42:23 2007 -0500
34781 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34783 commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
34784 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34785 Date: Thu Jul 5 22:41:24 2007 -0500
34789 Replaced whitespace with tabs
34791 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34793 commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
34794 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34795 Date: Thu Jul 5 22:39:07 2007 -0500
34797 Create new header file and move peripherals base address from configs file to new header file.
34799 Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
34801 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34803 commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
34804 Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34805 Date: Thu Jul 5 22:24:58 2007 -0500
34809 Changed MAKEALL file mode to executable, removed executable file mode from Makefile
34811 Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
34813 commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
34814 Author: Jon Loeliger <jdl@freescale.com>
34815 Date: Tue Jul 10 11:19:50 2007 -0500
34817 disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
34819 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34820 Those always evaluated TRUE, and thus were always compiled
34821 even when IDE really wasn't defined/wanted.
34823 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34825 commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
34826 Author: Jon Loeliger <jdl@freescale.com>
34827 Date: Tue Jul 10 11:13:21 2007 -0500
34829 drivers/: Remove lingering references to CFG_CMD_* symbols.
34831 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34832 Those always evaluated TRUE, and thus were always compiled
34833 even when IDE really wasn't defined/wanted.
34835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34837 commit f40a7f3e3888b42a43674b099e5470022c8c544c
34838 Author: Jon Loeliger <jdl@freescale.com>
34839 Date: Tue Jul 10 11:07:56 2007 -0500
34841 fs/: Remove lingering references to CFG_CMD_* symbols.
34843 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34844 Those always evaluated TRUE, and thus were always compiled
34845 even when IDE really wasn't defined/wanted.
34847 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34849 commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
34850 Author: Jon Loeliger <jdl@freescale.com>
34851 Date: Tue Jul 10 11:05:02 2007 -0500
34853 net/: Remove lingering references to CFG_CMD_* symbols.
34855 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34856 Those always evaluated TRUE, and thus were always compiled
34857 even when IDE really wasn't defined/wanted.
34859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34861 commit 902531788376046da212afd1661cffb62f3daa1c
34862 Author: Jon Loeliger <jdl@freescale.com>
34863 Date: Tue Jul 10 11:02:44 2007 -0500
34865 common/: Remove lingering references to CFG_CMD_* symbols.
34867 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34868 Those always evaluated TRUE, and thus were always compiled
34869 even when IDE really wasn't defined/wanted.
34871 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34873 commit d39b57415838c73fb0a37eca84de3c68ba990586
34874 Author: Jon Loeliger <jdl@freescale.com>
34875 Date: Tue Jul 10 10:48:22 2007 -0500
34877 board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
34879 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34880 Those always evaluated TRUE, and thus were always compiled
34881 even when IDE really wasn't defined/wanted.
34883 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34885 commit 77a318545d57aefa844752465b94c7e09a3f26d0
34886 Author: Jon Loeliger <jdl@freescale.com>
34887 Date: Tue Jul 10 10:39:10 2007 -0500
34889 board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
34891 Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
34892 Those always evaluated TRUE, and thus were always compiled
34893 even when IDE really wasn't defined/wanted.
34895 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34897 commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
34898 Author: Jon Loeliger <jdl@freescale.com>
34899 Date: Tue Jul 10 10:27:39 2007 -0500
34901 cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
34903 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34905 commit 079a136c3588814784561d6e4856970ee82d6e2a
34906 Author: Jon Loeliger <jdl@freescale.com>
34907 Date: Tue Jul 10 10:12:10 2007 -0500
34909 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
34911 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34912 used to be included but CONFIG_BOOTP_MASK was not defined.
34914 Remove lingering references to CFG_CMD_* symbols.
34916 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34918 commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
34919 Author: Jon Loeliger <jdl@freescale.com>
34920 Date: Tue Jul 10 09:38:02 2007 -0500
34922 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
34924 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34925 used to be included but CONFIG_BOOTP_MASK was not defined.
34927 Remove lingering references to CFG_CMD_* symbols.
34929 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34931 commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
34932 Author: Jon Loeliger <jdl@freescale.com>
34933 Date: Tue Jul 10 09:29:01 2007 -0500
34935 include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
34937 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34938 used to be included but CONFIG_BOOTP_MASK was not defined.
34940 Remove lingering references to CFG_CMD_* symbols.
34942 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34944 commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
34945 Author: Jon Loeliger <jdl@freescale.com>
34946 Date: Tue Jul 10 09:22:23 2007 -0500
34948 include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
34950 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34951 used to be included but CONFIG_BOOTP_MASK was not defined.
34953 Remove lingering references to CFG_CMD_* symbols.
34955 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34957 commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
34958 Author: Jon Loeliger <jdl@freescale.com>
34959 Date: Tue Jul 10 09:10:49 2007 -0500
34961 include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
34963 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34964 used to be included but CONFIG_BOOTP_MASK was not defined.
34966 Remove lingering references to CFG_CMD_* symbols.
34968 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34970 commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
34971 Author: Jon Loeliger <jdl@freescale.com>
34972 Date: Tue Jul 10 09:02:57 2007 -0500
34974 include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
34976 Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
34977 used to be included but CONFIG_BOOTP_MASK was not defined.
34979 Remove lingering references to CFG_CMD_* symbols.
34981 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34983 commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
34984 Author: Jon Loeliger <jdl@freescale.com>
34985 Date: Mon Jul 9 22:08:34 2007 -0500
34987 Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
34989 All of the choices for CONFIG_BOOTP_ are now documented in
34990 the README file. You must now individually select exactly
34991 the set that you want using a series of
34992 #define CONFIG_BOOTP_<x>
34993 statements in the board port config files now.
34995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
34997 commit d3b8c1a743dcd31625c99e6a44590f207eb00028
34998 Author: Jon Loeliger <jdl@freescale.com>
34999 Date: Mon Jul 9 21:57:31 2007 -0500
35001 include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35005 commit 2fd90ce575b02d189cbf443c85309bcd001aa393
35006 Author: Jon Loeliger <jdl@freescale.com>
35007 Date: Mon Jul 9 21:48:26 2007 -0500
35009 include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35011 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35013 commit 37d4bb70586659dedef1658ce1bed071be098aec
35014 Author: Jon Loeliger <jdl@freescale.com>
35015 Date: Mon Jul 9 21:38:02 2007 -0500
35017 include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35019 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35021 commit 18225e8dd1950bd6dbf35011e436db7f474c187d
35022 Author: Jon Loeliger <jdl@freescale.com>
35023 Date: Mon Jul 9 21:31:24 2007 -0500
35025 include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35027 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35029 commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
35030 Author: Jon Loeliger <jdl@freescale.com>
35031 Date: Mon Jul 9 21:24:19 2007 -0500
35033 include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35035 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35037 commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
35038 Author: Jon Loeliger <jdl@freescale.com>
35039 Date: Mon Jul 9 21:16:53 2007 -0500
35041 include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
35043 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35045 commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
35046 Author: Jon Loeliger <jdl@freescale.com>
35047 Date: Mon Jul 9 19:12:30 2007 -0500
35049 Retire CONFIG_COMMANDS finally.
35050 Strip old CFG_CMD_* symbols out.
35052 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35054 commit b5501f7d720fed99ab0b42c83f5dea52868ce007
35055 Author: Jon Loeliger <jdl@freescale.com>
35056 Date: Mon Jul 9 19:10:03 2007 -0500
35058 Update README.* to reference new CONFIG_CMD_* names now.
35060 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35062 commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
35063 Author: Jon Loeliger <jdl@freescale.com>
35064 Date: Mon Jul 9 19:06:00 2007 -0500
35066 cpu/m*: Remove obsolete references to CONFIG_COMMANDS
35068 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35070 commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
35071 Author: Jon Loeliger <jdl@freescale.com>
35072 Date: Mon Jul 9 18:57:22 2007 -0500
35074 cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
35076 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35078 commit ab3abcbabd840928fb1eb5122118ca466b5e5013
35079 Author: Jon Loeliger <jdl@freescale.com>
35080 Date: Mon Jul 9 18:45:16 2007 -0500
35082 board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
35084 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35086 commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
35087 Author: Jon Loeliger <jdl@freescale.com>
35088 Date: Mon Jul 9 18:38:39 2007 -0500
35090 board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
35092 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35094 commit c508a4cefd8a953fc64957650506a035e6e3d9d1
35095 Author: Jon Loeliger <jdl@freescale.com>
35096 Date: Mon Jul 9 18:31:28 2007 -0500
35098 board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
35100 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35102 commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
35103 Author: Jon Loeliger <jdl@freescale.com>
35104 Date: Mon Jul 9 18:24:55 2007 -0500
35106 board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
35108 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35110 commit fcec2eb93e126400009729328e797f12bc94f1fd
35111 Author: Jon Loeliger <jdl@freescale.com>
35112 Date: Mon Jul 9 18:19:09 2007 -0500
35114 board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
35116 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35118 commit a593814f2be0c9cdc3133cd550b167b8a988328f
35119 Author: Jon Loeliger <jdl@freescale.com>
35120 Date: Mon Jul 9 18:10:50 2007 -0500
35122 rtc/: Remove obsolete references to CONFIG_COMMANDS
35124 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35126 commit 67350568f9d46e66c21829f3513b3db0caeb948b
35127 Author: Jon Loeliger <jdl@freescale.com>
35128 Date: Mon Jul 9 18:05:38 2007 -0500
35130 lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
35132 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35134 commit 7def6b34f910f08d7ef0a14646da067719237ca2
35135 Author: Jon Loeliger <jdl@freescale.com>
35136 Date: Mon Jul 9 18:02:11 2007 -0500
35138 lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
35140 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35142 commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
35143 Author: Jon Loeliger <jdl@freescale.com>
35144 Date: Mon Jul 9 17:56:50 2007 -0500
35146 fs/: Remove obsolete references to CONFIG_COMMANDS
35148 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35150 commit c91898bbc505aff3e12a807af88e76da18efb7ee
35151 Author: Jon Loeliger <jdl@freescale.com>
35152 Date: Mon Jul 9 17:46:09 2007 -0500
35154 tools/: Remove obsolete references to CONFIG_COMMANDS
35156 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35158 commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
35159 Author: Jon Loeliger <jdl@freescale.com>
35160 Date: Mon Jul 9 17:45:14 2007 -0500
35162 net/: Remove obsolete references to CONFIG_COMMANDS
35164 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35166 commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
35167 Author: Jon Loeliger <jdl@freescale.com>
35168 Date: Mon Jul 9 17:39:42 2007 -0500
35170 drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
35172 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35174 commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
35175 Author: Jon Loeliger <jdl@freescale.com>
35176 Date: Mon Jul 9 17:30:01 2007 -0500
35178 drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
35180 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35182 commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
35183 Author: Jon Loeliger <jdl@freescale.com>
35184 Date: Mon Jul 9 17:22:37 2007 -0500
35186 disk/: Remove obsolete references to CONFIG_COMMANDS
35188 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35190 commit 639221c76c88215bd55af83ad174fc30d1940f8f
35191 Author: Jon Loeliger <jdl@freescale.com>
35192 Date: Mon Jul 9 17:15:49 2007 -0500
35194 include/: Remove obsolete references to CONFIG_COMMANDS
35195 Mostly removed from comments here.
35197 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35199 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
35200 Author: Wolfgang Denk <wd@denx.de>
35201 Date: Tue Jul 10 00:01:28 2007 +0200
35203 Coding style cleanup; update CHANGELOG.
35205 Signed-off-by: Wolfgang Denk <wd@denx.de>
35207 commit c8603cfbd4573379a6076c9c208545ba2bbf019a
35208 Author: Stefan Roese <sr@denx.de>
35209 Date: Mon Jul 9 11:00:24 2007 +0200
35211 Small coding style cleanup
35213 Signed-off-by: Stefan Roese <sr@denx.de>
35215 commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
35216 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35217 Date: Mon Jul 9 10:10:08 2007 +0200
35219 Migrate esd 405EP boards to new NAND subsystem
35221 Remove unused CFG_NAND_LEGACY define
35223 These boards to not have NAND.
35225 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35227 commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
35228 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35229 Date: Mon Jul 9 10:10:06 2007 +0200
35231 Migrate esd 405EP boards to new NAND subsystem
35233 Migrate esd 405EP boards to new NAND subsystem
35236 -use correct io accessors (in/out_be32())
35238 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35240 commit e09f7ab5749c345f924da272bea0521a73af5b11
35241 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35242 Date: Mon Jul 9 10:10:04 2007 +0200
35244 Migrate esd 405EP boards to new NAND subsystem
35246 This patch prepares the migration from the legacy NAND driver
35247 to U-Boot's new NAND subsystem for esd boards.
35249 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
35251 commit c3517f919d0f61650cf3027fd4faf0f631142f6c
35252 Author: Jon Loeliger <jdl@freescale.com>
35253 Date: Sun Jul 8 18:10:08 2007 -0500
35255 common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
35257 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35259 commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
35260 Author: Jon Loeliger <jdl@freescale.com>
35261 Date: Sun Jul 8 18:05:39 2007 -0500
35263 common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
35265 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35267 commit c76fe47425afc7d5d670ff0539823c85d65d9c42
35268 Author: Jon Loeliger <jdl@freescale.com>
35269 Date: Sun Jul 8 18:02:23 2007 -0500
35271 common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
35273 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35275 commit baa26db4113679b80970ff447d91cc10217742a6
35276 Author: Jon Loeliger <jdl@freescale.com>
35277 Date: Sun Jul 8 17:51:39 2007 -0500
35279 common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
35281 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35283 commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
35284 Author: Jon Loeliger <jdl@freescale.com>
35285 Date: Sun Jul 8 17:02:01 2007 -0500
35287 Clear up confusion over the CMD_POST and POST_DIAG mess.
35289 For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
35290 when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
35291 Clear this mess up some.
35293 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35295 commit b3631487105a57ab7cbadfc26efbaf9676275018
35296 Author: Jon Loeliger <jdl@freescale.com>
35297 Date: Sun Jul 8 15:45:08 2007 -0500
35299 Remove references to the old cmd_confdefs.h include file.
35301 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35303 commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
35304 Author: Jon Loeliger <jdl@freescale.com>
35305 Date: Sun Jul 8 15:42:59 2007 -0500
35307 include/configs: Catch some CONFIG_CMD_* conversion stragglers.
35309 Use new CONFIG_CMD_* in lwmon5.h board config file.
35310 Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
35312 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35314 commit a5562901661bd428f7e5feb333f796372cb81019
35315 Author: Jon Loeliger <jdl@freescale.com>
35316 Date: Sun Jul 8 15:31:57 2007 -0500
35318 include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
35320 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35322 commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
35323 Author: Jon Loeliger <jdl@freescale.com>
35324 Date: Sun Jul 8 15:02:44 2007 -0500
35326 include/configs: Use new CONFIG_CMD_* in various S* named board config files.
35328 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35330 commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
35331 Author: Jon Loeliger <jdl@freescale.com>
35332 Date: Sun Jul 8 15:12:40 2007 -0500
35334 include/configs: Use new CONFIG_CMD_* in various R* named board config files.
35336 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35338 commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
35339 Author: Jon Loeliger <jdl@freescale.com>
35340 Date: Sun Jul 8 14:55:07 2007 -0500
35342 include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
35344 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35346 commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
35347 Author: Jon Loeliger <jdl@freescale.com>
35348 Date: Sun Jul 8 14:49:44 2007 -0500
35350 include/configs: Use new CONFIG_CMD_* in various P* named board config files.
35352 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35354 commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
35355 Author: Jon Loeliger <jdl@freescale.com>
35356 Date: Sun Jul 8 14:21:43 2007 -0500
35358 include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
35360 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35362 commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
35363 Author: Jon Loeliger <jdl@freescale.com>
35364 Date: Sun Jul 8 14:14:17 2007 -0500
35366 include/configs: Use new CONFIG_CMD_* in various M* named board config files.
35368 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35370 commit 348f258f24253433e4a2302a0bbceb6740a67246
35371 Author: Jon Loeliger <jdl@freescale.com>
35372 Date: Sun Jul 8 13:46:18 2007 -0500
35374 include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
35376 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35378 commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
35379 Author: Jon Loeliger <jdl@freescale.com>
35380 Date: Sun Jul 8 10:09:35 2007 -0500
35382 include/configs: Use new CONFIG_CMD_* in various H* named board config files.
35384 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35386 commit 60a0876b5106b34220e459c208bbf648073306c0
35387 Author: Jon Loeliger <jdl@freescale.com>
35388 Date: Sat Jul 7 21:04:26 2007 -0500
35390 include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
35392 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35394 commit dcaa71562826a2466e894c868d132509dcda8444
35395 Author: Jon Loeliger <jdl@freescale.com>
35396 Date: Sat Jul 7 20:56:05 2007 -0500
35398 include/configs: Use new CONFIG_CMD_* in various E* named board config files.
35400 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35402 commit 3c3227f3c737502311b25b72084573901cbbf17d
35403 Author: Jon Loeliger <jdl@freescale.com>
35404 Date: Sat Jul 7 20:40:43 2007 -0500
35406 include/configs: Use new CONFIG_CMD_* in various D* named board config files.
35408 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35410 commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
35411 Author: Jon Loeliger <jdl@freescale.com>
35412 Date: Thu Jul 5 19:52:35 2007 -0500
35414 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
35416 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35418 commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
35419 Author: Jon Loeliger <jdl@freescale.com>
35420 Date: Thu Jul 5 19:32:07 2007 -0500
35422 include/configs: Use new CONFIG_CMD_* in various B* named board config files.
35424 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35426 commit 498ff9a228485bd4b9f23d066bada268f9add1dd
35427 Author: Jon Loeliger <jdl@freescale.com>
35428 Date: Thu Jul 5 19:13:52 2007 -0500
35430 include/configs: Use new CONFIG_CMD_* in various A* named board config files.
35432 Since ADS860.h includes "board/fads/fads.h" with ramifications
35433 on the CONFIG_COMMAND treatment, it too has to be adjusted to
35434 exclude already configured commands in this same commit.
35436 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35438 commit 10e038932f22ee80ebd53de312531e70e6590a2f
35439 Author: Thomas Knobloch <knobloch@siemens.com>
35440 Date: Fri Jul 6 14:58:39 2007 +0200
35442 [NAND] Bad block skipping for command nboot
35444 The old implementation of command nboot does not support reading the image from
35445 NAND flash with skipping of bad blocks. The patch implements a new version of
35446 the nboot command: by calling nboot.jffs2 from the u-boot command line the
35447 command will load the image from NAND flash with respect to bad blocks (by using
35448 nand_read_opts()). This is similar to e.g. the NAND read command: "nand
35451 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
35452 Signed-off-by: Stefan Roese <sr@denx.de>
35454 commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
35455 Author: Stefan Roese <sr@denx.de>
35456 Date: Fri Jul 6 12:26:51 2007 +0200
35458 ppc4xx: Update lwmon5 default environment
35460 Signed-off-by: Stefan Roese <sr@denx.de>
35462 commit 5d187430a055d62f17ca84d75e7245439d1f7e75
35463 Author: Stefan Roese <sr@denx.de>
35464 Date: Fri Jul 6 11:48:24 2007 +0200
35466 ppc4xx: Update lwmon5 board
35468 Add unlock=yes environment variable to default variables to unlock
35469 the CFI flash by default.
35471 Signed-off-by: Stefan Roese <sr@denx.de>
35473 commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
35474 Author: Stefan Roese <sr@denx.de>
35475 Date: Fri Jul 6 09:45:47 2007 +0200
35477 Fix problem with get/setdcr commands introduced by cfg patches
35479 Signed-off-by: Stefan Roese <sr@denx.de>
35481 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
35482 Author: Wolfgang Denk <wd@denx.de>
35483 Date: Fri Jul 6 02:50:19 2007 +0200
35485 Code cleanup and default config update for STC GP3 SSA board.
35487 Signed-off-by: Wolfgang Denk <wd@denx.de>
35489 commit e4dbe1b215f5c6c462e76909d240bd96472b84de
35490 Author: Wolfgang Denk <wd@denx.de>
35491 Date: Thu Jul 5 17:56:27 2007 +0200
35493 Fixing some typos etc. introduced mainly by cfg patches.
35495 Signed-off-by: Wolfgang Denk <wd@denx.de>
35497 commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
35498 Author: Wolfgang Denk <wd@denx.de>
35499 Date: Thu Jul 5 11:12:16 2007 +0200
35501 Minor coding style cleanup. Update CHANGELOG.
35503 commit dca3b3d6d6396b67e5e84af53452164923c73443
35504 Author: Jon Loeliger <jdl@jdl.com>
35505 Date: Wed Jul 4 22:33:46 2007 -0500
35507 include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
35509 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35511 commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
35512 Author: Jon Loeliger <jdl@jdl.com>
35513 Date: Wed Jul 4 22:33:38 2007 -0500
35515 include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
35517 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35519 commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
35520 Author: Jon Loeliger <jdl@jdl.com>
35521 Date: Wed Jul 4 22:33:30 2007 -0500
35523 include/configs: Use new CONFIG_CMD_* in various s* named board config files.
35525 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35527 commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
35528 Author: Jon Loeliger <jdl@jdl.com>
35529 Date: Wed Jul 4 22:33:23 2007 -0500
35531 include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
35533 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35535 commit 26a34560d56a9df5bc2ae23525d9229736134757
35536 Author: Jon Loeliger <jdl@jdl.com>
35537 Date: Wed Jul 4 22:33:17 2007 -0500
35539 include/configs: Use new CONFIG_CMD_* in various p* named board config files.
35541 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35543 commit a5cb23092a7d31490a33d4ec871468b63babfa3c
35544 Author: Jon Loeliger <jdl@jdl.com>
35545 Date: Wed Jul 4 22:33:13 2007 -0500
35547 include/configs: Use new CONFIG_CMD_* in various o* named board config files.
35549 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35551 commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
35552 Author: Jon Loeliger <jdl@jdl.com>
35553 Date: Wed Jul 4 22:33:07 2007 -0500
35555 include/configs: Use new CONFIG_CMD_* in various n* named board config files.
35557 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35559 commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
35560 Author: Jon Loeliger <jdl@jdl.com>
35561 Date: Wed Jul 4 22:33:01 2007 -0500
35563 include/configs: Use new CONFIG_CMD_* in various m* named board config files.
35565 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35567 commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
35568 Author: Jon Loeliger <jdl@jdl.com>
35569 Date: Wed Jul 4 22:32:57 2007 -0500
35571 include/configs: Use new CONFIG_CMD_* in various l* named board config files.
35573 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35575 commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
35576 Author: Jon Loeliger <jdl@jdl.com>
35577 Date: Wed Jul 4 22:32:51 2007 -0500
35579 include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
35581 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35583 commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
35584 Author: Jon Loeliger <jdl@jdl.com>
35585 Date: Wed Jul 4 22:32:32 2007 -0500
35587 include/configs: Use new CONFIG_CMD_* in various i* named board config files.
35589 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35591 commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
35592 Author: Jon Loeliger <jdl@jdl.com>
35593 Date: Wed Jul 4 22:32:25 2007 -0500
35595 include/configs: Use new CONFIG_CMD_* in various h* named board config files.
35597 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35599 commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
35600 Author: Jon Loeliger <jdl@jdl.com>
35601 Date: Wed Jul 4 22:32:19 2007 -0500
35603 include/configs: Use new CONFIG_CMD_* in various g* named board config files.
35605 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35607 commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
35608 Author: Jon Loeliger <jdl@jdl.com>
35609 Date: Wed Jul 4 22:32:10 2007 -0500
35611 include/configs: Use new CONFIG_CMD_* in various e* named board config files.
35613 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35615 commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
35616 Author: Jon Loeliger <jdl@jdl.com>
35617 Date: Wed Jul 4 22:32:03 2007 -0500
35619 include/configs: Use new CONFIG_CMD_* in various d* named board config files.
35621 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35623 commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
35624 Author: Jon Loeliger <jdl@jdl.com>
35625 Date: Wed Jul 4 22:31:56 2007 -0500
35627 include/configs: Use new CONFIG_CMD_* in various c* named board config files.
35629 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35631 commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
35632 Author: Jon Loeliger <jdl@jdl.com>
35633 Date: Wed Jul 4 22:31:49 2007 -0500
35635 include/configs: Use new CONFIG_CMD_* in various b* named board config files.
35637 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35639 commit 0b361c916617aff79e647b40f0e43361e0bbaccf
35640 Author: Jon Loeliger <jdl@jdl.com>
35641 Date: Wed Jul 4 22:31:42 2007 -0500
35643 include/configs: Use new CONFIG_CMD_* in various a* named board config files.
35645 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35647 commit b730cda82e362df6a22f4c59c0a9b97e885b1014
35648 Author: Jon Loeliger <jdl@jdl.com>
35649 Date: Wed Jul 4 22:31:35 2007 -0500
35651 include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
35653 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35655 commit d794cfefead5fc177cf4f41164e80382e9c9484a
35656 Author: Jon Loeliger <jdl@jdl.com>
35657 Date: Wed Jul 4 22:31:15 2007 -0500
35659 include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
35661 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35663 commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
35664 Author: Jon Loeliger <jdl@jdl.com>
35665 Date: Wed Jul 4 22:31:07 2007 -0500
35667 include/configs: Use new CONFIG_CMD_* in STx board config files.
35669 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35671 commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
35672 Author: Jon Loeliger <jdl@jdl.com>
35673 Date: Wed Jul 4 22:30:58 2007 -0500
35675 include/configs: Use new CONFIG_CMD_* in sbc* board config files.
35677 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35679 commit 2694690e285acaa34922f55f4b5ae030da60c55a
35680 Author: Jon Loeliger <jdl@jdl.com>
35681 Date: Wed Jul 4 22:30:50 2007 -0500
35683 include/configs: Use new CONFIG_CMD_* in TQM board config files.
35685 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35687 commit 1cc4c458329765b58e584a19821e796b3c10e976
35688 Author: Jon Loeliger <jdl@jdl.com>
35689 Date: Wed Jul 4 22:30:28 2007 -0500
35691 include/configs: Use new CONFIG_CMD_* in 82xx board config files.
35693 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35695 commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
35696 Author: Jon Loeliger <jdl@jdl.com>
35697 Date: Wed Jul 4 22:30:06 2007 -0500
35699 include/configs: Use new CONFIG_CMD_* in 83xx board config files.
35701 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35703 commit b44896215a09c60fa40cae906f7ed207bbc2c492
35704 Author: Sergei Poselenov <sposelenov@emcraft.com>
35705 Date: Thu Jul 5 08:17:37 2007 +0200
35707 Merged POST framework with the current TOT.
35709 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
35711 commit b24629fa377214d63bb40d1360e354b6d3e4af56
35712 Author: Jon Loeliger <jdl@jdl.com>
35713 Date: Wed Jun 13 13:23:15 2007 -0500
35715 mpc86xx: Remove old CFG_CMD_* references.
35717 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35719 commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
35720 Author: Jon Loeliger <jdl@jdl.com>
35721 Date: Wed Jun 13 13:22:54 2007 -0500
35723 Add MPC8568MDS to MAKEALL 85xx target.
35725 It was missing from the original port submission.
35727 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35729 commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
35730 Author: Jon Loeliger <jdl@jdl.com>
35731 Date: Wed Jun 13 13:22:08 2007 -0500
35733 include/configs: Use new CONFIG_CMD_* in 85xx board config files.
35735 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35737 commit 56b304ac2091689506088a9ae67f63fd6300cf16
35738 Author: Jon Loeliger <jdl@jdl.com>
35739 Date: Wed Jun 13 13:21:37 2007 -0500
35741 Fix #if typo in CONFIG_CMD_* changes.
35743 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35745 commit f780b83316d9af1f61d71cc88b1917b387b9b995
35746 Author: Niklaus Giger <niklausgiger@gmx.ch>
35747 Date: Wed Jun 27 18:11:38 2007 +0200
35749 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
35751 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
35753 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
35754 Author: Stefan Roese <sr@denx.de>
35755 Date: Wed Jul 4 10:06:30 2007 +0200
35757 ppc4xx: Update lwmon5 board
35759 - Add optional ECC generation routine to preserve existing
35760 RAM values. This is needed for the Linux log-buffer support
35761 - Add optional DDR2 setup with CL=4
35762 - GPIO50 not used anymore
35763 - Lime register setup added
35765 Signed-off-by: Stefan Roese <sr@denx.de>
35767 commit 6810a34677dbc446334f5e451f1682426dd33b49
35768 Author: Grant Likely <grant.likely@secretlab.ca>
35769 Date: Tue Jul 3 00:17:28 2007 -0600
35771 Fix Makefile to use $(MKCONFIG) macro for all board ports
35773 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35775 commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
35776 Author: Grant Likely <grant.likely@secretlab.ca>
35777 Date: Tue Jul 3 00:17:28 2007 -0600
35779 Fix Makefile to use $(MKCONFIG) macro for all board ports
35781 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35783 commit 057004f4a4863554d56cc56268bfa7c7d9738e27
35784 Author: Grant Likely <grant.likely@secretlab.ca>
35785 Date: Tue Jul 3 00:34:49 2007 -0600
35787 Correct fixup relocation for mpc83xx
35789 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35791 commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
35792 Author: Grant Likely <grant.likely@secretlab.ca>
35793 Date: Tue Jul 3 00:34:44 2007 -0600
35795 Correct fixup relocation for mpc8260
35797 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35799 commit f3a52fe05923935db86985daf9438e2f70ac39aa
35800 Author: Grant Likely <grant.likely@secretlab.ca>
35801 Date: Tue Jul 3 00:34:39 2007 -0600
35803 Correct fixup relocation for mpc824x
35805 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35807 commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
35808 Author: Grant Likely <grant.likely@secretlab.ca>
35809 Date: Tue Jul 3 00:34:34 2007 -0600
35811 Correct fixup relocation for mpc8220
35813 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35815 commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
35816 Author: Grant Likely <grant.likely@secretlab.ca>
35817 Date: Tue Jul 3 00:34:29 2007 -0600
35819 Correct fixup relocation for MPC5xxx
35821 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35823 commit 3649cd99ba815b6601868735765602f00ef3692b
35824 Author: Grant Likely <grant.likely@secretlab.ca>
35825 Date: Tue Jul 3 00:34:24 2007 -0600
35827 Correct relocation fixup for mpc5xx
35829 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35831 commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
35832 Author: Grant Likely <grant.likely@secretlab.ca>
35833 Date: Tue Jul 3 00:34:19 2007 -0600
35835 Don't set gd->reloc_off if relocation of .fixup works correctly
35837 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35839 commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
35840 Author: Grant Likely <grant.likely@secretlab.ca>
35841 Date: Tue Jul 3 00:34:14 2007 -0600
35843 Remove obsolete mpc83xx linker scripts
35845 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35847 commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
35848 Author: Grant Likely <grant.likely@secretlab.ca>
35849 Date: Tue Jul 3 00:34:09 2007 -0600
35851 Consolidate mpc8260 linker scripts
35853 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35855 commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
35856 Author: Grant Likely <grant.likely@secretlab.ca>
35857 Date: Tue Jul 3 00:34:04 2007 -0600
35859 Remove obsolete mpc824x linker scripts
35861 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35863 commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
35864 Author: Grant Likely <grant.likely@secretlab.ca>
35865 Date: Tue Jul 3 00:33:59 2007 -0600
35867 Remove obsolete mpc824x linker scripts (3 of 4)
35869 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35871 commit a71c084f3ac7fedf144537db2b2da47323068833
35872 Author: Grant Likely <grant.likely@secretlab.ca>
35873 Date: Tue Jul 3 00:33:53 2007 -0600
35875 Remove obsolete mpc824x linker scripts (2 of 4)
35877 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35879 commit f670a15468d1365241d40022b9408e1004181f5e
35880 Author: Grant Likely <grant.likely@secretlab.ca>
35881 Date: Tue Jul 3 00:33:48 2007 -0600
35883 Remove obsolete mpc824x linker scripts (1 of 4)
35885 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35887 commit 09555bd45a04c0e54f172528d21bc18896550d28
35888 Author: Grant Likely <grant.likely@secretlab.ca>
35889 Date: Tue Jul 3 00:33:43 2007 -0600
35891 Remove obsolete mpc8220 linker scripts
35893 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35895 commit 5efb992f046e51225c93d52f80fecbe433abd789
35896 Author: Grant Likely <grant.likely@secretlab.ca>
35897 Date: Tue Jul 3 00:33:38 2007 -0600
35899 Remove obsolete mpc5xxx linker scripts (3 of 3)
35901 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35903 commit 07c13dfef65b31647e69d8b61daa1eec598add1a
35904 Author: Grant Likely <grant.likely@secretlab.ca>
35905 Date: Tue Jul 3 00:33:33 2007 -0600
35907 Remove obsolete mpc5xxx linker scripts (2 of 3)
35909 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35911 commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
35912 Author: Grant Likely <grant.likely@secretlab.ca>
35913 Date: Tue Jul 3 00:33:28 2007 -0600
35915 Remove obsolete mpc5xxx linker scripts (1 of 3)
35917 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35919 commit b7d8e05f8675249b5f208aa73babeed384a4519d
35920 Author: Grant Likely <grant.likely@secretlab.ca>
35921 Date: Tue Jul 3 00:33:23 2007 -0600
35923 Remove obsolete mpc5xx linker scripts
35925 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35927 commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
35928 Author: Grant Likely <grant.likely@secretlab.ca>
35929 Date: Tue Jul 3 00:33:18 2007 -0600
35931 Consolidate mpc83xx linker scripts
35933 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35935 commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
35936 Author: Grant Likely <grant.likely@secretlab.ca>
35937 Date: Tue Jul 3 00:33:13 2007 -0600
35939 Consolidate mpc8260 linker scripts
35941 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35943 commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
35944 Author: Grant Likely <grant.likely@secretlab.ca>
35945 Date: Tue Jul 3 00:33:08 2007 -0600
35947 Consolidate mpc824x linker scripts
35949 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35951 commit 9c757b789a59a855db57b448dd825329c4e9c4a0
35952 Author: Grant Likely <grant.likely@secretlab.ca>
35953 Date: Tue Jul 3 00:33:03 2007 -0600
35955 Consolidate mpc8220 linker scripts
35957 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35959 commit d181c9a15cd41863fe24840d17848429f27d3c8c
35960 Author: Grant Likely <grant.likely@secretlab.ca>
35961 Date: Tue Jul 3 00:32:58 2007 -0600
35963 Consolidate mpc5xxx linker scripts
35965 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35967 commit 287ac924adb7291bebe5086652a362a30ab28b13
35968 Author: Grant Likely <grant.likely@secretlab.ca>
35969 Date: Tue Jul 3 00:32:53 2007 -0600
35971 Consolidate mpc5xx linker scripts
35973 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
35975 commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
35976 Author: Wolfgang Denk <wd@denx.de>
35977 Date: Wed Jul 4 00:43:53 2007 +0200
35979 Fix a few file permission problems.
35981 Signed-off-by: Wolfgang Denk <wd@denx.de>
35983 commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
35984 Author: Wolfgang Denk <wd@denx.de>
35985 Date: Wed Jul 4 00:38:38 2007 +0200
35987 Minor coding style cleanup. Rebuild CHANGELOG file.
35989 commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
35990 Author: Jon Loeliger <jdl@jdl.com>
35991 Date: Mon Jun 11 19:03:44 2007 -0500
35993 configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
35995 Signed-off-by: Jon Loeliger <jdl@freescale.com>
35997 commit 602ad3b33d9ceef83dbab46be68646d645d637ee
35998 Author: Jon Loeliger <jdl@jdl.com>
35999 Date: Mon Jun 11 19:03:39 2007 -0500
36001 README: Rewrite command line config to use CONFIG_CMD_* names.
36003 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36005 commit 72a074cec68e5bad60d63206c050974e08afd804
36006 Author: Jon Loeliger <jdl@jdl.com>
36007 Date: Mon Jun 11 19:03:34 2007 -0500
36009 include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36011 This is a compatibility step that allows both the older form
36012 and the new form to co-exist for a while until the older can
36013 be removed entirely.
36015 All transformations are of the form:
36017 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36019 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36021 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36023 commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
36024 Author: Jon Loeliger <jdl@jdl.com>
36025 Date: Mon Jun 11 19:03:28 2007 -0500
36027 tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36029 This is a compatibility step that allows both the older form
36030 and the new form to co-exist for a while until the older can
36031 be removed entirely.
36033 All transformations are of the form:
36035 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36037 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36039 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36041 commit 9107ebe0d352420895ab69b715697bdebc8caf50
36042 Author: Jon Loeliger <jdl@jdl.com>
36043 Date: Mon Jun 11 19:03:23 2007 -0500
36045 board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36047 This is a compatibility step that allows both the older form
36048 and the new form to co-exist for a while until the older can
36049 be removed entirely.
36051 All transformations are of the form:
36053 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36055 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36057 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36059 commit 5e378003d592ea828ec69d6defcd4de79096dd5c
36060 Author: Jon Loeliger <jdl@jdl.com>
36061 Date: Mon Jun 11 19:03:19 2007 -0500
36063 board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36065 This is a compatibility step that allows both the older form
36066 and the new form to co-exist for a while until the older can
36067 be removed entirely.
36069 All transformations are of the form:
36071 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36073 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36075 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36077 commit 737184114ec9c9e0ab94d6713536126073bd2472
36078 Author: Jon Loeliger <jdl@jdl.com>
36079 Date: Mon Jun 11 19:03:15 2007 -0500
36081 cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36083 This is a compatibility step that allows both the older form
36084 and the new form to co-exist for a while until the older can
36085 be removed entirely.
36087 All transformations are of the form:
36089 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36091 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36095 commit f48070fe5fe440dfb5ee5268c920de70e48ea327
36096 Author: Jon Loeliger <jdl@jdl.com>
36097 Date: Mon Jun 11 19:03:08 2007 -0500
36099 cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36101 This is a compatibility step that allows both the older form
36102 and the new form to co-exist for a while until the older can
36103 be removed entirely.
36105 All transformations are of the form:
36107 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36109 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36111 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36113 commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
36114 Author: Jon Loeliger <jdl@jdl.com>
36115 Date: Mon Jun 11 19:03:03 2007 -0500
36117 lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36119 This is a compatibility step that allows both the older form
36120 and the new form to co-exist for a while until the older can
36121 be removed entirely.
36123 All transformations are of the form:
36125 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36127 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36129 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36131 commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
36132 Author: Jon Loeliger <jdl@jdl.com>
36133 Date: Mon Jun 11 19:02:58 2007 -0500
36135 lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36137 This is a compatibility step that allows both the older form
36138 and the new form to co-exist for a while until the older can
36139 be removed entirely.
36141 All transformations are of the form:
36143 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36145 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36147 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36149 commit 98b79003c21c2578206003256de4e781d6b36ca8
36150 Author: Jon Loeliger <jdl@jdl.com>
36151 Date: Mon Jun 11 19:02:53 2007 -0500
36153 rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36155 This is a compatibility step that allows both the older form
36156 and the new form to co-exist for a while until the older can
36157 be removed entirely.
36159 All transformations are of the form:
36161 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36163 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36167 commit 6e2115acb6a892d53a6881bf253ae41d3df39156
36168 Author: Jon Loeliger <jdl@jdl.com>
36169 Date: Mon Jun 11 19:02:49 2007 -0500
36171 net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36173 This is a compatibility step that allows both the older form
36174 and the new form to co-exist for a while until the older can
36175 be removed entirely.
36177 All transformations are of the form:
36179 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36181 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36183 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36185 commit 45cdb9b72c94655c7308b464a2666057c0b286e0
36186 Author: Jon Loeliger <jdl@jdl.com>
36187 Date: Mon Jun 11 19:02:34 2007 -0500
36189 disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36191 This is a compatibility step that allows both the older form
36192 and the new form to co-exist for a while until the older can
36193 be removed entirely.
36195 All transformations are of the form:
36197 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36199 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36201 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36203 commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
36204 Author: Jon Loeliger <jdl@jdl.com>
36205 Date: Mon Jun 11 19:02:20 2007 -0500
36207 fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36209 This is a compatibility step that allows both the older form
36210 and the new form to co-exist for a while until the older can
36211 be removed entirely.
36213 All transformations are of the form:
36215 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36217 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36219 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36221 commit d5be43de93ff905c465e509d45a3164ef48d26e7
36222 Author: Jon Loeliger <jdl@jdl.com>
36223 Date: Mon Jun 11 19:02:10 2007 -0500
36225 drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36227 This is a compatibility step that allows both the older form
36228 and the new form to co-exist for a while until the older can
36229 be removed entirely.
36231 All transformations are of the form:
36233 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36235 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36237 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36239 commit b453960d4fdb87b3970d96119b90df2ed024fc4a
36240 Author: Jon Loeliger <jdl@jdl.com>
36241 Date: Mon Jun 11 19:02:05 2007 -0500
36243 common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36245 This is a compatibility step that allows both the older form
36246 and the new form to co-exist for a while until the older can
36247 be removed entirely.
36249 All transformations are of the form:
36251 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36253 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36255 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36257 commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
36258 Author: Jon Loeliger <jdl@jdl.com>
36259 Date: Mon Jun 11 19:01:54 2007 -0500
36261 common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36263 This is a compatibility step that allows both the older form
36264 and the new form to co-exist for a while until the older can
36265 be removed entirely.
36267 All transformations are of the form:
36269 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36271 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36273 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36275 commit a76adc8142c1d956385a109e0b70f9319ede4d66
36276 Author: Jon Loeliger <jdl@jdl.com>
36277 Date: Mon Jun 11 19:01:43 2007 -0500
36279 common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
36281 This is a compatibility step that allows both the older form
36282 and the new form to co-exist for a while until the older can
36283 be removed entirely.
36285 All transformations are of the form:
36287 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
36289 #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
36291 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36293 commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
36294 Author: Jon Loeliger <jdl@jdl.com>
36295 Date: Mon Jun 11 19:01:34 2007 -0500
36297 Introduce initial versions of new Command Config files.
36299 Derive three new files from cmd_confdefs.h:
36300 config_bootp.h - Has BOOTP related config options, not commands
36301 config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
36302 config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
36304 For now, include "config_bootp.h" for compatability until all
36305 users of it directly include it properly.
36307 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36309 commit 1f2a05898658900dc5717761e27abf2052e67e13
36310 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
36311 Date: Sat Jun 30 18:50:48 2007 +0200
36315 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
36317 commit a5d71e290f3673269be8eefb4ec44f53412f9461
36318 Author: Heiko Schocher <hs@pollux.denx.de>
36319 Date: Mon Jun 25 19:11:37 2007 +0200
36321 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
36323 Signed-off-by: Heiko Schocher <hs@denx.de>
36325 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
36326 Author: Niklaus Giger <niklaus.giger@nestal.com>
36327 Date: Mon Jun 25 17:03:13 2007 +0200
36329 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
36331 This patch prints the DDR status registers upon machine check
36332 interrupt on the 440EPx/GRx. This can be useful especially when
36333 ECC support is enabled.
36335 I added some small changes to the original patch from Niklaus to
36336 make it compile clean.
36338 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
36339 Signed-off-by: Stefan Roese <sr@denx.de>
36341 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
36342 Author: Niklaus Giger <niklaus.giger@nestal.com>
36343 Date: Mon Jun 25 16:50:55 2007 +0200
36345 ppc4xx: Fix O=buildir builds
36347 This patch fixes the problem to assemble cpu/ppc4xx/start.S
36348 experienced last week where building failed having specified
36349 O=../build.sequoia.
36351 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
36353 commit 466fff1a7bb5fe764a06450626f6098219f446b8
36354 Author: Stefan Roese <sr@denx.de>
36355 Date: Mon Jun 25 15:57:39 2007 +0200
36357 ppc4xx: Add pci_pre_init() for 405 boards
36359 This patch removes the CFG_PCI_PRE_INIT option completely, since
36360 it's not needed anymore with the patch from Matthias Fuchs with
36361 the "weak" pci_pre_init() implementation.
36363 Signed-off-by: Stefan Roese <sr@denx.de>
36365 commit 6f35c53166213c24a5a0e2390ed861136ff73870
36366 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36367 Date: Sun Jun 24 17:41:21 2007 +0200
36369 ppc4xx: Maintenance patch for esd's CPCI405 derivats
36371 -add pci_pre_init() for pci interrupt fixup code
36372 -disable phy sleep mode via reset_phy() function
36373 -use correct io accessors
36376 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36378 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
36379 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36380 Date: Sun Jun 24 17:23:41 2007 +0200
36382 ppc4xx: Add pci_pre_init() for 405 boards
36384 This patch adds support for calling a plattform dependant
36385 pci_pre_init() function for 405 boards. This can be used to
36386 move the current pci_405gp_fixup_irq() function into the
36389 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
36390 A default function with 'weak' attribute is used when
36391 a board specific pci_pre_init() is not implemented.
36393 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
36395 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
36396 Author: Wolfgang Denk <wd@denx.de>
36397 Date: Fri Jun 22 23:59:00 2007 +0200
36399 Coding stylke cleanup; rebuild CHANGELOG
36401 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
36402 Author: Igor Lisitsin <igor@emcraft.com>
36403 Date: Wed Apr 18 14:55:19 2007 +0400
36405 Adapt log buffer code to support Linux 2.6
36407 A new environment variable, "logversion", selects the log buffer
36408 behaviour. If it is not set or set to a value other than 2, then the
36409 old, Linux 2.4.4, behaviour is selected.
36411 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
36414 commit a11e06965ec91270c51853407ff1261d3c740386
36415 Author: Igor Lisitsin <igor@emcraft.com>
36416 Date: Wed Mar 28 19:06:19 2007 +0400
36418 Extend POST support for PPC440
36420 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
36422 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
36425 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
36426 Author: Heiko Schocher <hs@pollux.denx.de>
36427 Date: Fri Jun 22 19:11:54 2007 +0200
36429 [PCS440EP] upgrade the PCS440EP board:
36430 - Show on the Status LEDs, some States of the board.
36431 - Get the MAC addresses from the EEProm
36433 - use the CF on the board.
36434 - check the U-Boot image in the Flash with a SHA1
36436 - use dynamic TLB entries generation for the SDRAM
36438 Signed-off-by: Heiko Schocher <hs@denx.de>
36440 commit 3a1f5c81b0b9557817a789bece839905581c2205
36441 Author: Stefan Roese <sr@denx.de>
36442 Date: Fri Jun 22 16:58:40 2007 +0200
36444 ppc4xx: Fix problem with extended program_tlb() funtion
36446 The recently extended program_tlb() function had a problem when
36447 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
36448 virtual address was not incremented. This patch fixes this issue
36449 and is tested on Katmai with 512MB SDRAM.
36451 Signed-off-by: Stefan Roese <sr@denx.de>
36453 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
36454 Author: Rafal Jaworowski <raj@semihalf.com>
36455 Date: Fri Jun 22 14:58:04 2007 +0200
36457 [ppc] Fix build breakage for all non-4xx PowerPC variants.
36459 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
36460 - minor 4xx cleanup
36462 commit d677b32855f577ae2690dcd64a172cdd706e0ffc
36463 Author: Mike Frysinger <vapier@gentoo.org>
36464 Date: Fri Jun 22 10:34:12 2007 +0200
36466 [patch] add nand_init() prototype to nand.h
36468 since nand_init() is expected to be called by other parts of u-boot, there
36469 should be a prototype for it in nand.h
36471 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
36472 Signed-off-by: Stefan Roese <sr@denx.de>
36474 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
36475 Author: Wolfgang Denk <wd@denx.de>
36476 Date: Wed Jun 20 18:14:24 2007 +0200
36478 Coding style cleanup. Refresh CHANGELOG.
36480 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
36481 Author: Stefan Roese <sr@denx.de>
36482 Date: Tue Jun 19 17:22:44 2007 +0200
36484 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
36486 This patch adds a board command to configure the I2C bootstrap EEPROM
36487 values. Right now 533 and 667MHz are supported for booting either via NOR
36488 or NAND FLASH. Here the usage:
36490 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
36491 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
36493 Signed-off-by: Stefan Roese <sr@denx.de>
36495 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
36496 Author: Stefan Roese <sr@denx.de>
36497 Date: Tue Jun 19 16:42:31 2007 +0200
36499 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
36501 The latest changes showed a problem with the location of the NAND-SPL
36502 image in the OCM and the init-data area (incl. cache). This patch
36503 fixes this problem.
36505 Signed-off-by: Stefan Roese <sr@denx.de>
36507 commit 86ba99e34194394052d24c04dc40d1263d29a26f
36508 Author: Stefan Roese <sr@denx.de>
36509 Date: Tue Jun 19 16:40:58 2007 +0200
36511 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
36513 Signed-off-by: Stefan Roese <sr@denx.de>
36515 commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
36516 Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
36517 Date: Mon Jun 18 13:50:13 2007 -0500
36519 Added M5329AFEE and M5329BFEE Platforms
36521 Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
36522 drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
36523 include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
36526 Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
36527 common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
36528 include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
36529 include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
36530 include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
36531 lib_m68k/time.c, net/eth.c and rtc/Makefile
36533 Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
36535 commit 093172f08d6afb3f34d8a2f26ee0ee874261cf27
36536 Author: Michal Simek <monstr@monstr.eu>
36537 Date: Sun Jun 17 19:04:11 2007 +0200
36539 [fix] email reparation
36541 commit 3666afffe7baf859c6ae0ce2bebbc8ab7e512ddc
36542 Author: Michal Simek <monstr@monstr.eu>
36543 Date: Sun Jun 17 19:03:21 2007 +0200
36545 [FIX] fix microblaze file permitission
36547 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
36548 Author: Stefan Roese <sr@denx.de>
36549 Date: Fri Jun 15 11:33:41 2007 +0200
36551 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
36553 Now CONFIG_440 has to be defined in all PPC440 board config files.
36555 Signed-off-by: Stefan Roese <sr@denx.de>
36557 commit efa35cf12d914d4caba942acd5a6c45f217de302
36558 Author: Grzegorz Bernacki <gjb@semihalf.com>
36559 Date: Fri Jun 15 11:19:28 2007 +0200
36561 ppc4xx: Clean up 440 exceptions handling
36563 - Introduced dedicated switches for building 440 and 405 images required
36564 for 440-specific machine instructions like 'rfmci' etc.
36566 - Exception vectors moved to the proper location (_start moved away from
36567 the critical exception handler space, which it occupied)
36569 - CriticalInput now serviced (with default handler)
36571 - MachineCheck properly serviced (added a dedicated handler and return
36574 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
36575 unhandled and those not relevant for 4xx were eliminated)
36577 - Eliminated Linux leftovers, removed dead code
36579 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
36580 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
36581 Signed-off-by: Stefan Roese <sr@denx.de>
36583 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
36584 Author: Stefan Roese <sr@denx.de>
36585 Date: Fri Jun 15 08:18:01 2007 +0200
36587 [ppc4xx] Add initial lwmon5 board support
36589 This patch adds initial support for the Liebherr lwmon5 board euqipped
36590 with an AMCC 440EPx PowerPC.
36592 Signed-off-by: Stefan Roese <sr@denx.de>
36594 commit 85f737376d5ff3d5f0d45a8b657686326d175307
36595 Author: Stefan Roese <sr@denx.de>
36596 Date: Fri Jun 15 07:39:43 2007 +0200
36598 [ppc4xx] Extend 44x GPIO setup with default output state
36600 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
36601 is extended with the default GPIO output state (level).
36603 Signed-off-by: Stefan Roese <sr@denx.de>
36605 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
36606 Author: Stefan Roese <sr@denx.de>
36607 Date: Thu Jun 14 11:14:32 2007 +0200
36609 [ppc4xx] Extend program_tlb() with virtual & physical addresses
36611 Now program_tlb() allows to program a TLB (or multiple) with
36612 different virtual and physical addresses. With this change, now one
36613 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
36614 diabled and once with caches enabled.
36616 Signed-off-by: Stefan Roese <sr@denx.de>
36618 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
36619 Author: Detlev Zundel <dzu@denx.de>
36620 Date: Wed May 23 19:02:41 2007 +0200
36622 Change 'repeatable' attribute of some commands to sensible values.
36624 Most prominently this changes 'erase' to be non-repeatable.
36626 Signed-off-by: Detlev Zundel <dzu@denx.de>
36628 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
36629 Author: Detlev Zundel <dzu@denx.de>
36630 Date: Wed May 23 18:47:48 2007 +0200
36632 Fix 'run' not to continue after interrupted command
36634 Signed-off-by: Detlev Zundel <dzu@denx.de>
36636 commit 9b7464a2c88614e1061f509c48930a3d240d1a35
36637 Author: Jason Jin <Jason.jin@freescale.com>
36638 Date: Mon Jun 11 15:14:24 2007 +0200
36640 USB: This patch fix readl in ohci swap reg access.
36642 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
36644 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
36645 Author: Bartlomiej Sieka <tur@semihalf.com>
36646 Date: Fri Jun 8 14:52:22 2007 +0200
36648 TQM5200: Add Flat Device Tree support, update default env. accordingly.
36650 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
36651 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
36653 commit 9045f33c023f698660a2e45d1b2194c0711abebc
36654 Author: Wolfgang Denk <wd@denx.de>
36655 Date: Fri Jun 8 10:24:58 2007 +0200
36657 Fix config problems on SC3 board; make ide_reset_timeout work.
36659 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
36660 Author: Benoît Monin <bmonin@adeneo.eu>
36661 Date: Fri Jun 8 09:55:24 2007 +0200
36663 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
36665 Set the correct value in GPIOx_TCR when configuring the gpio
36666 with CFG_440_GPIO_TABLE.
36668 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
36669 Signed-off-by: Stefan Roese <sr@denx.de>
36671 commit f539edc076cfe52bff919dd512ba8d7af0e22092
36672 Author: Vadim Bendebury <vbendeb@google.com>
36673 Date: Thu May 24 15:52:25 2007 -0700
36675 cosmetic changes to bcm570x driver
36677 This is a cosmetic only changes submission.
36678 It affects files relevant to bcm570x driver.
36679 the commands used to generate this change was
36682 Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
36684 The BMW target (the only one using this chip so far) builds cleanly, the
36685 `before and after' generated object files for drivers/bcm570x.c and
36686 drivers/tigon3.o are identical as reported by objdump -d
36688 Signed-off-by: Vadim Bendebury <vbendeb@google.com>
36689 Signed-off-by: Ben Warren <bwarren@qstreams.com>
36691 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
36692 Author: Wolfgang Denk <wd@denx.de>
36693 Date: Wed Jun 6 16:26:56 2007 +0200
36695 Coding Style cleanup; generate new CHANGELOG file.
36697 Signed-off-by: Wolfgang Denk <wd@denx.de>
36699 commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
36700 Author: Markus Klotzbuecher <mk@denx.de>
36701 Date: Wed Jun 6 11:49:44 2007 +0200
36703 TRAB, USB: update trab board configuration for use of generic ohci driver
36705 commit dace45acd1c1357daa9322099d07c9a9e08b0024
36706 Author: Markus Klotzbuecher <mk@denx.de>
36707 Date: Wed Jun 6 11:49:43 2007 +0200
36709 USB: ohci fixes and cleanup for ppc4xx and yosemite board.
36711 commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
36712 Author: Markus Klotzbuecher <mk@denx.de>
36713 Date: Wed Jun 6 11:49:43 2007 +0200
36715 USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
36717 commit fc43be478f2aa37ce38acd85355038866e4162af
36718 Author: Markus Klotzbuecher <mk@denx.de>
36719 Date: Wed Jun 6 11:49:35 2007 +0200
36721 USB/OHCI: endianness cleanup in the generic ohci driver
36723 commit c440bfe6d6d92d66478a7e84402b31f48413617b
36724 Author: Stefan Roese <sr@denx.de>
36725 Date: Wed Jun 6 11:42:13 2007 +0200
36727 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
36729 This patch adds NAND booting support for the AMCC Acadia eval board.
36731 Please make sure to configure jumper J7 to position 2-3 when booting
36732 from NOR, and to position 1-2 when booting for NAND.
36734 I also added a board command to configure the I2C bootstrap EEPROM
36735 values. Right now only 267MHz is support for booting either via NOR
36736 or NAND FLASH. Here the usage:
36738 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
36739 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
36741 Signed-off-by: Stefan Roese <sr@denx.de>
36743 commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
36744 Author: Rodolfo Giometti <giometti@linux.it>
36745 Date: Wed Jun 6 10:08:14 2007 +0200
36747 Files include/linux/byteorder/{big,little}_endian.h define
36748 __BIG_ENDIAN and __LITTLE_ENDIAN.
36750 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36752 commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
36753 Author: Zhang Wei <wei.zhang@freescale.com>
36754 Date: Wed Jun 6 10:08:14 2007 +0200
36756 Add USB PCI-OHCI, USB keyboard and event poll support to the
36757 MPC8641HPCN board config file.
36759 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
36761 commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
36762 Author: Zhang Wei <wei.zhang@freescale.com>
36763 Date: Wed Jun 6 10:08:14 2007 +0200
36765 USB PCI-OHCI, interrupt pipe and usb event poll support
36767 This patch added USB PCI-OHCI chips support, interrupt pipe support
36768 and usb event poll support. For supporting the USB interrupt pipe, the
36769 globe urb_priv is moved to purb in ed struct. Now, we can process
36770 several urbs at one time. The interrupt pipe support codes are ported
36771 from Linux kernel 2.4.
36773 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
36775 commit fdcfaa1b02268b2899e374b35adf936c911a47eb
36776 Author: Zhang Wei <wei.zhang@freescale.com>
36777 Date: Wed Jun 6 10:08:13 2007 +0200
36779 USB event poll support
36781 This patch adds USB event poll support, which could be used in usbkbd
36782 and other usb devices driver when the asynchronous interrupt
36783 processing is supported.
36785 Signed-off-by: Zhang Wei <wei.zhang@freescale.com
36787 commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
36788 Author: Rodolfo Giometti <giometti@linux.it>
36789 Date: Wed Jun 6 10:08:12 2007 +0200
36791 ISP116x: delay for crappy USB keys
36793 Using some (very) slow USB keys cause the USB host controller buffers
36794 are not ready to be read by the CPU so we need an extra delay before
36795 reading the USB storage data.
36797 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
36799 commit 09444143670c9c2243cb7aba9f70b3713d33bed1
36800 Author: Markus Klotzbuecher <mk@denx.de>
36801 Date: Wed Jun 6 10:08:12 2007 +0200
36803 Change duplicate usb_cpu_init_fail to usb_board_init_fail
36805 Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
36808 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
36810 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
36811 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
36812 Date: Tue Jun 5 12:30:52 2007 -0500
36814 mpc8641 image size cleanup
36816 e600 does not have a bootpg restriction.
36817 Move the version string to beginning of image at fff00000.
36818 Resetvec.S is not needed.
36819 Update flash copy instructions.
36820 Add tftpflash env variable
36822 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
36823 Signed-off-by: Jon Loeliger <jdl@freescale.com>
36825 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
36826 Author: Benoît Monin <bmonin@adeneo.eu>
36827 Date: Mon Jun 4 08:36:05 2007 +0200
36829 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
36831 The attached patch is mainly cosmetic, allowing u-boot to
36832 display the correct bootstrap option letter according to the
36835 The original patch was extended with 405EZ support by Stefan
36838 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
36839 Signed-off-by: Stefan Roese <sr@denx.de>
36841 commit 5b1313fb2758ffce8b624457f777d8cc6709608d
36842 Author: Nikita V. Youshchenko <yoush@debian.org>
36843 Date: Wed May 23 12:45:19 2007 +0400
36845 fix compilation problem for mpc8349itx CFG_RAMBOOT
36847 Current include/configs/MPC8349ITX.h does contain some support for building
36848 image that will be started from memory (without putting in into flash).
36849 It could be triggered by building with TEXT_BASE set to a low value.
36851 However, this support is incomplete: using of low TEXT_BASE causes
36852 defining configuration macros in inconsistent way, which later leads
36853 to compilation errors. In particular. flash support is being disabled,
36854 but then flash structures get referenced.
36856 This patch fixes this, making it possible to build with low TEXT_BASE.
36858 Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
36860 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36862 commit 8a364f0970de49949d635e60accf463c6443ef8c
36863 Author: Nikita V. Youshchenko <yoush@debian.org>
36864 Date: Wed May 23 12:45:25 2007 +0400
36866 add missing 'console' var to default mpc8349itx config
36868 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
36870 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
36871 Author: Stefan Roese <sr@denx.de>
36872 Date: Fri Jun 1 16:18:17 2007 +0200
36874 ppc4xx: Add missing file for Bamboo NAND booting support
36876 Signed-off-by: Stefan Roese <sr@denx.de>
36878 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
36879 Author: Stefan Roese <sr@denx.de>
36880 Date: Fri Jun 1 15:58:19 2007 +0200
36882 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
36884 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
36885 suggested by AMCC it is not recommended to dynamically change the EBC
36886 speed after bootup. So we undo this change to be on the safe side.
36888 Signed-off-by: Stefan Roese <sr@denx.de>
36890 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
36891 Author: Stefan Roese <sr@denx.de>
36892 Date: Fri Jun 1 15:29:04 2007 +0200
36894 ppc4xx: Update Sequoia NAND booting support with ECC
36896 Signed-off-by: Stefan Roese <sr@denx.de>
36898 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
36899 Author: Stefan Roese <sr@denx.de>
36900 Date: Fri Jun 1 15:27:11 2007 +0200
36902 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
36904 This patch adds NAND booting support for the AMCC Bamboo eval board.
36905 Since the NAND-SPL boot image is limited to 4kbytes, this version
36906 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
36907 supported, since the setup code for I2C DIMM autodetection and
36908 configuration is too big for this NAND bootloader.
36910 Signed-off-by: Stefan Roese <sr@denx.de>
36912 commit 42be56f53c8b107868e6125c8524ae84293e95a7
36913 Author: Stefan Roese <sr@denx.de>
36914 Date: Fri Jun 1 15:23:04 2007 +0200
36916 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
36918 The U-Boot NAND booting support is now extended to support ECC
36919 upon loading of the NAND U-Boot image.
36921 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
36923 Signed-off-by: Stefan Roese <sr@denx.de>
36925 commit a471db07fbb65a841ffc9f4f112562b945230f98
36926 Author: Stefan Roese <sr@denx.de>
36927 Date: Fri Jun 1 15:19:29 2007 +0200
36929 ppc4xx: Prepare Bamboo port for NAND booting support
36931 This patch updates the "normal" Bamboo NOR booting port, so
36932 that it is compatible with the coming soon NAND booting
36935 It also enables the 2nd NAND flash on the Bamboo.
36937 Signed-off-by: Stefan Roese <sr@denx.de>
36939 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
36940 Author: Stefan Roese <sr@denx.de>
36941 Date: Fri Jun 1 15:16:58 2007 +0200
36943 ppc4xx: Update in_be32() functions and friends to latest Linux version
36945 Signed-off-by: Stefan Roese <sr@denx.de>
36947 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
36948 Author: Stefan Roese <sr@denx.de>
36949 Date: Fri Jun 1 15:15:12 2007 +0200
36951 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
36953 This patch adds hardware ECC support to the NDFC driver. It also
36954 changes the register access from using the "simple" in32/out32
36955 functions to the in_be32/out_be32 functions, which make sure
36956 that the access is correctly synced. This is the only recommended
36957 access to SoC registers in the current Linux kernel.
36959 Signed-off-by: Stefan Roese <sr@denx.de>
36961 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
36962 Author: Stefan Roese <sr@denx.de>
36963 Date: Fri Jun 1 15:12:15 2007 +0200
36965 NAND: Update nand_ecc.c to latest Linux version
36967 This patch updates the nand_ecc code to the latest Linux version.
36968 The main reason for this is the more compact code. This makes
36969 it possible to include the ECC code into the NAND bootloader
36970 image (NAND_SPL) for PPC4xx.
36972 Signed-off-by: Stefan Roese <sr@denx.de>
36974 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
36975 Author: Stefan Roese <sr@denx.de>
36976 Date: Fri Jun 1 15:09:50 2007 +0200
36978 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
36980 Signed-off-by: Stefan Roese <sr@denx.de>
36982 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
36983 Author: Stefan Roese <sr@denx.de>
36984 Date: Fri Jun 1 13:45:24 2007 +0200
36986 ppc4xx: Change Luan config file to support ECC
36988 With the updated 44x DDR2 driver the Luan board now supports
36989 ECC generation and checking.
36991 Signed-off-by: Stefan Roese <sr@denx.de>
36993 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
36994 Author: Stefan Roese <sr@denx.de>
36995 Date: Fri Jun 1 13:45:00 2007 +0200
36997 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
36999 Add config option for 180 degree advance clock control as needed
37000 for the AMCC Luan eval board.
37002 Signed-off-by: Stefan Roese <sr@denx.de>
37004 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
37005 Author: Wolfgang Denk <wd@denx.de>
37006 Date: Thu May 31 17:20:09 2007 +0200
37008 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
37010 Signed-off-by: Wolfgang Denk <wd@denx.de>
37012 commit 7049288fb1f16f1b317140226cdebd07bd416395
37013 Author: Bartlomiej Sieka <tur@semihalf.com>
37014 Date: Sun May 27 17:26:46 2007 +0200
37016 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
37018 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37020 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
37021 Author: Bartlomiej Sieka <tur@semihalf.com>
37022 Date: Sun May 27 17:06:36 2007 +0200
37024 Motion-PRO: Add support for redundant environment.
37026 Enable redundant environment, add a MTD partition for it; also add env.
37027 variable command for passing MTD partitions to the kernel command line.
37029 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37030 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37032 commit a26eabeec31746f06d309103690892805696e344
37033 Author: Bartlomiej Sieka <tur@semihalf.com>
37034 Date: Sun May 27 17:05:11 2007 +0200
37036 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
37038 Allow passing longer command line to the kernel - useful especially
37039 for passing MTD partition layout.
37041 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37042 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37044 commit 9160b96f71483a116de81c68985e8ee306d36764
37045 Author: Bartlomiej Sieka <tur@semihalf.com>
37046 Date: Sun May 27 17:04:18 2007 +0200
37048 Fix: Add missing NULL termination in strings expanded by macros parser.
37050 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37051 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37053 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
37054 Author: Bartlomiej Sieka <tur@semihalf.com>
37055 Date: Sun May 27 17:03:37 2007 +0200
37057 Motion-PRO: Update EEPROM's page write bits and write delay.
37059 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
37060 have a page write capability of two bytes", and "This device offers fast (1ms)
37061 byte write". Add 3ms of extra delay.
37063 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37064 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37066 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
37067 Author: Bartlomiej Sieka <tur@semihalf.com>
37068 Date: Sun May 27 16:58:45 2007 +0200
37070 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
37072 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
37073 networking does not function. This commit switches PHY to TX mode by clearing
37074 the FX_SEL bit of Mode Control Register. It also reverses commit
37075 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
37077 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
37078 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37080 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
37081 Author: Bartlomiej Sieka <tur@semihalf.com>
37082 Date: Sun May 27 16:57:15 2007 +0200
37084 Motion-PRO: Add support for the temperature sensor.
37086 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
37087 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37089 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
37090 Author: Bartlomiej Sieka <tur@semihalf.com>
37091 Date: Sun May 27 16:55:23 2007 +0200
37093 Motion-PRO: Add displaying of CPLD revision information during boot.
37095 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
37096 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37098 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
37099 Author: Bartlomiej Sieka <tur@semihalf.com>
37100 Date: Sun May 27 16:53:43 2007 +0200
37102 MPC5xxx: Change names of defines related to IPB and PCI clocks.
37104 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
37105 them does not cause PCI or IPB clocks to run at the specified speed.
37106 Instead, they configure divisors used to calculate said clocks. This
37107 patch renames the defines according to their real function.
37109 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
37110 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37112 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
37113 Author: Bartlomiej Sieka <tur@semihalf.com>
37114 Date: Sun May 27 16:51:48 2007 +0200
37116 Motion-PRO: Add LED support.
37118 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
37119 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
37120 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
37122 commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
37123 Author: Ulf Samuelsson <ulf@atmel.com>
37124 Date: Thu May 24 12:12:47 2007 +0200
37126 [PATCH][NAND] Define the Vendor Id for Micron NAND Flash
37128 Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
37129 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37130 Signed-off-by: Stefan Roese <sr@denx.de>
37132 commit d756894722c888d09a9fa1df8323753772d3dcce
37133 Author: Stefan Roese <sr@denx.de>
37134 Date: Thu May 24 09:49:00 2007 +0200
37136 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
37138 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
37139 fixes a small bug in the 405EZ OCM initialization. Thanks for
37142 Signed-off-by: Stefan Roese <sr@denx.de>
37144 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
37145 Author: Stefan Roese <sr@denx.de>
37146 Date: Thu May 24 08:22:09 2007 +0200
37148 ppc4xx: Update AMCC Acadia support for board revision 1.1
37150 This patch updates the Acadia (405EZ) support for the new 1.1 board
37151 revision. It also adds support for NAND FLASH via the 4xx NDFC.
37153 Please note that the jumper J7 must be in position 2-3 for this
37154 NAND support. Position 1-2 is for NAND booting only. NAND booting
37155 support will follow later.
37157 Signed-off-by: Stefan Roese <sr@denx.de>
37159 commit 822d55365bb557e084d0e33625a6dedcc866110b
37160 Author: Jon Loeliger <jdl@freescale.com>
37161 Date: Wed May 23 14:09:46 2007 -0500
37163 Add LIST_86xx MAKEALL target for PowerPC builds.
37165 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37167 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
37168 Author: Stefan Roese <sr@denx.de>
37169 Date: Tue May 22 12:48:09 2007 +0200
37171 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
37173 Signed-off-by: Stefan Roese <sr@denx.de>
37175 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
37176 Author: Stefan Roese <sr@denx.de>
37177 Date: Tue May 22 12:46:10 2007 +0200
37179 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
37181 This patch adds support for 405 PPC's to the 4xx NAND driver
37182 ndfc.c. This is in preparation for the new AMCC 405EZ.
37184 Signed-off-by: Stefan Roese <sr@denx.de>
37186 commit 10603d76767426be803dadd4fb688b97eb69481c
37187 Author: Stefan Roese <sr@denx.de>
37188 Date: Mon May 21 07:41:22 2007 +0200
37190 ppc4xx: Fix problem in 405EZ OCM initialization
37192 As spotted by Bruce Adler this patch fixes an initialization problem
37195 Signed-off-by: Stefan Roese <sr@denx.de>
37197 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
37198 Author: Peter Pearse <peter.pearse@arm.com>
37199 Date: Fri May 18 16:47:03 2007 +0100
37201 Reduce line lengths to 80 characters max.
37203 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
37204 Author: Peter Pearse <peter.pearse@arm.com>
37205 Date: Fri May 18 14:34:07 2007 +0100
37207 Makefile permissions
37209 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
37210 Author: Peter Pearse <peter.pearse@arm.com>
37211 Date: Fri May 18 14:33:11 2007 +0100
37213 Makefile permissions
37215 commit 255a3577c848706441daee0174543efe205a77f8
37216 Author: Kim Phillips <kim.phillips@freescale.com>
37217 Date: Wed May 16 16:52:19 2007 -0500
37219 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
37221 For all practical u-boot purposes, TSECs don't differ throughout the
37222 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
37224 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37226 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
37227 Author: Stefano Babic <sbabic@denx.de>
37228 Date: Wed May 16 14:49:12 2007 +0200
37230 Fix compile problem cause my Microblaze merge
37232 Signed-off-by: Stefano Babic <sbabic@denx.de>
37234 commit ada4697d0230d6da552867777f98a67ec3ba2579
37235 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37236 Date: Wed May 16 13:23:10 2007 +0200
37238 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
37240 Because the Sequoia board does not boot with an EBC faster than 66MHz,
37241 the clock divider are changed after the initial boot process.
37243 This allows for maximum clocking speeds to be achieved on newer boards.
37244 Sequoia boards with 666.66 MHz processors require that the EBC divider
37245 be set to 3 in order to start the initial boot process at a slower EBC
37246 speed. After the initial boot process, the divider can be set back to 2,
37247 which will cause the boards to run at 83.333MHz. This is backward
37248 compatible with boards with 533.33 MHz processors, as these boards will
37249 already be set with an EBC divider of 2.
37251 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37253 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
37254 Author: Wolfgang Denk <wd@denx.de>
37255 Date: Wed May 16 01:16:53 2007 +0200
37257 Minor Coding Style cleanup, update CHANGELOG.
37259 Signed-off-by: Wolfgang Denk <wd@denx.de>
37261 commit d62f64cc23a940eafe712c776b3249e4160753d1
37262 Author: Wolfgang Denk <wd@denx.de>
37263 Date: Wed May 16 00:13:33 2007 +0200
37265 Coding Style Cleanup, new CHANGELOG
37267 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
37268 Author: Wolfgang Denk <wd@denx.de>
37269 Date: Tue May 15 23:38:05 2007 +0200
37271 Minor coding style cleanup.
37273 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
37274 Author: mushtaq khan <mushtaq_k@procsys.com>
37275 Date: Fri Apr 20 14:23:02 2007 +0530
37277 Add driver for S-ATA-controller on Intel processors with South
37278 Bridge, ICH-5, ICH-6 and ICH-7.
37282 1. Code is divided in to two files. All functions, which are
37283 controller specific are kept in "drivers/ata_piix.c" file and
37284 functions, which are not controller specific, are kept in
37285 "common/cmd_sata.c" file.
37287 2. Reading and Writing from the S-ATA drive is done using PIO method.
37289 3. Driver can be configured for 48-bit addressing by defining macro
37290 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
37293 4. S-ATA read function is hooked to the File system, commands like
37294 ext2ls and ext2load file can be used. This has been tested.
37296 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
37297 controller and identifies the S-ATA drives connected to it.
37299 6. U-Boot command "sata" is added, which is used to read/write, print
37300 partition table and get info about the drives present. This I have
37301 implemented in same way as "ide" command is implemented in U-Boot.
37303 7. This driver is for S-ATA in native mode.
37305 8. This driver does not support the Native command queuing and
37308 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
37310 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
37311 Author: mushtaq khan <mushtaq_k@procsys.com>
37312 Date: Mon Apr 30 15:57:22 2007 +0530
37314 Fixes bug clearing the bss section for i386
37317 There is a bug in the code of clearing the bss section for processor
37318 i386.(File: cpu/i386/start.S)
37319 In the code, bss_start addr (starting addr of bss section) is put into
37320 the register %eax, but the code which clears the bss section refers to
37321 the addr pointed by %edi.
37323 This patch fixes this bug by putting bss_start into %edi register.
37325 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
37327 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
37328 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
37329 Date: Mon Apr 30 16:47:28 2007 -0500
37331 Add support for BCM5464 Quad Phy
37333 Added support for Broadcom's BCM5464 Quad Phy
37335 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
37337 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
37338 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
37339 Date: Wed May 9 08:10:57 2007 +0800
37341 Search the exception table with linear algorithm
37343 Search the exception table with linear algorithm instead of
37344 bisecting algorithm.
37345 Because the exception table might be unsorted.
37347 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
37349 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
37350 Author: Aubrey.Li <aubrey.adi@gmail.com>
37351 Date: Mon May 14 11:47:35 2007 +0800
37353 Fix compilation issues on MACOSX
37355 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
37356 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
37358 commit 56fd7162985c412317bbf763a225fba23c64fd31
37359 Author: Stephen Williams <steve@icarus.com>
37360 Date: Tue May 15 07:55:42 2007 -0700
37362 Fix for compile of JSE target
37364 The attached patch fixes the compile of the JSE board in the
37365 denx git as of 14 may 2007. It is an extremely simple patch,
37366 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
37368 Fix to compile JSE against 20070514 git of u-boot
37370 commit 69df3c4da0c93017cceb25a366e794570bd0ed98
37371 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
37372 Date: Sun May 13 21:01:03 2007 +0900
37374 sh: MS7750SE support.
37376 This adds support for the Hitachi MS7750SE.
37378 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37380 commit 0b135cfc2e524dc249b75057b55dd4cc09842e27
37381 Author: Nobuhiro Iwamatsu <iwamatsu@rahute.(none)>
37382 Date: Sun May 13 20:58:00 2007 +0900
37384 sh: First support code of SuperH.
37386 Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
37388 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
37389 Author: Stefan Roese <sr@denx.de>
37390 Date: Fri May 11 12:01:49 2007 +0200
37392 ppc4xx: Add mtcpr/mfcpr access macros
37394 Signed-off-by: Stefan Roese <sr@denx.de>
37396 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
37397 Author: Stefan Roese <sr@denx.de>
37398 Date: Fri May 11 12:01:06 2007 +0200
37400 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
37402 Signed-off-by: Stefan Roese <sr@denx.de>
37404 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
37405 Author: Piotr Kruszynski <ppk@semihalf.com>
37406 Date: Thu May 10 16:55:52 2007 +0200
37408 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
37411 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
37412 Author: Peter Pearse <peter.pearse@arm.com>
37413 Date: Wed May 9 11:42:44 2007 +0100
37415 Add the board directory for SMN42
37417 commit 160131bf965785419626df6c388729fe0b597992
37418 Author: Peter Pearse <peter.pearse@arm.com>
37419 Date: Wed May 9 11:41:58 2007 +0100
37421 Add the files for the SMN42 board
37423 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
37424 Author: Peter Pearse <peter.pearse@arm.com>
37425 Date: Wed May 9 11:40:34 2007 +0100
37427 Remove the deleted files for the SMN42 patch
37429 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
37430 Author: Peter Pearse <peter.pearse@arm.com>
37431 Date: Wed May 9 11:37:56 2007 +0100
37433 New board SMN42 branch
37435 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
37436 Author: Peter Pearse <peter.pearse@arm.com>
37437 Date: Wed May 9 10:24:38 2007 +0100
37439 Makefile permissions
37441 commit b84289b595731e8851df46e893845cc1322c9b9b
37442 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
37443 Date: Tue May 8 14:17:07 2007 -0500
37445 8641hpcn: Fix Makefile after moving pixis to board/freescale.
37447 The OBJTREE != SRCTREE build scenario was broken.
37450 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
37451 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37453 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
37454 Author: Michal Simek <monstr@monstr.eu>
37455 Date: Tue May 8 15:57:43 2007 +0200
37457 add: reading special purpose registers
37459 commit 1a50f164beb065f360fbddb76029607d6b099698
37460 Author: Michal Simek <monstr@monstr.eu>
37461 Date: Tue May 8 14:52:52 2007 +0200
37463 add: Microblaze V5 exception handling
37465 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
37466 Author: Michal Simek <monstr@monstr.eu>
37467 Date: Tue May 8 14:39:11 2007 +0200
37469 add: FSL control read and write
37471 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
37472 Author: Piotr Kruszynski <ppk@semihalf.com>
37473 Date: Tue May 8 13:05:44 2007 +0200
37475 [Motion-PRO] Add support for I2C, EEPROM and RTC.
37477 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
37478 Author: Bartlomiej Sieka <tur@semihalf.com>
37479 Date: Tue May 8 10:23:56 2007 +0200
37481 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
37484 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
37485 Author: Bartlomiej Sieka <tur@semihalf.com>
37486 Date: Tue May 8 09:39:12 2007 +0200
37488 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
37489 eliminates networking problems in Linux (timeouts).
37491 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
37492 Author: Bartlomiej Sieka <tur@semihalf.com>
37493 Date: Tue May 8 09:21:57 2007 +0200
37495 [Motion-PRO] Enable Flat Device Tree support and modify default environment
37496 to allow booting of FDT-expecting kernels.
37498 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
37499 Author: Michal Simek <monstr@monstr.eu>
37500 Date: Mon May 7 23:58:31 2007 +0200
37502 new: USE_MSR_INTR support
37504 commit 008861a2f3ef2c062744d733787c7e530a1b8761
37505 Author: Bartlomiej Sieka <tur@semihalf.com>
37506 Date: Mon May 7 22:36:15 2007 +0200
37508 [MPC5xxx] There are networking problems on the Motion-PRO board with
37509 current PHY initalization code (tftp timeouts all the time). This commit
37510 temporarily disables PHY initalization sequence to make the networking
37511 operational, until a fix is found.
37513 commit abca901869c3760b6c5fecb825db6c1d91a78a93
37514 Author: Wolfgang Denk <wd@denx.de>
37515 Date: Mon May 7 22:10:36 2007 +0200
37517 Get rid of duplicated file (see include/configs/sbc8560.h instead)
37519 Signed-off-by: Wolfgang Denk <wd@denx.de>
37521 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
37522 Author: Wolfgang Denk <wd@denx.de>
37523 Date: Mon May 7 22:07:08 2007 +0200
37525 Get rid of duplicated file (see doc/README.SBC8560 instead)
37527 Signed-off-by: Wolfgang Denk <wd@denx.de>
37529 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
37530 Author: Michal Simek <monstr@monstr.eu>
37531 Date: Mon May 7 19:43:10 2007 +0200
37533 fix: read and write MSR - repair number of parameters
37535 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
37536 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37537 Date: Mon May 7 19:42:49 2007 +0200
37539 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
37541 A '3' got cut off in the formatting of the last patch to automatically
37542 change the clock speed of the system clock on sequoia board.
37544 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37545 Signed-off-by: Stefan Roese <sr@denx.de>
37547 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
37548 Author: Michal Simek <monstr@monstr.eu>
37549 Date: Mon May 7 19:33:51 2007 +0200
37551 new: fsl interrupt support
37552 FSL_Has_data is connected to INTC.
37554 commit 792032baa7d625e34c981ab6df521911bd8dc861
37555 Author: Michal Simek <monstr@monstr.eu>
37556 Date: Mon May 7 19:30:12 2007 +0200
37558 fix: interrupt handler
37561 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
37562 Author: Michal Simek <monstr@monstr.eu>
37563 Date: Mon May 7 19:25:08 2007 +0200
37565 fix: remove asm code
37567 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
37568 Author: Michal Simek <monstr@monstr.eu>
37569 Date: Mon May 7 19:12:43 2007 +0200
37571 fix: clean interrupt
37573 commit 42efed6130c8fcf7da881385b5427065d2801757
37574 Author: Michal Simek <monstr@monstr.eu>
37575 Date: Mon May 7 17:22:25 2007 +0200
37577 fix: interrupt handler for multiple sources
37579 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
37580 Author: Michal Simek <monstr@monstr.eu>
37581 Date: Mon May 7 17:11:09 2007 +0200
37583 new: add writing to msr register
37585 commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
37586 Author: Markus Klotzbuecher <mk@denx.de>
37587 Date: Mon May 7 16:43:56 2007 +0200
37589 Fix an ancient CHANGELOG conflict
37591 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
37592 Author: Timur Tabi <timur@freescale.com>
37593 Date: Sat May 5 08:12:30 2007 +0200
37595 5xxx: write MAC address to mac-address and local-mac-address
37597 Some device trees have a mac-address property, some have local-mac-address,
37598 and some have both. To support all of these device trees, ftp_cpu_setup()
37599 should write the MAC address to mac-address and local-mac-address, if they
37602 Signed-off-by: Timur Tabi <timur@freescale.com>
37603 Acked-by: Grant Likely <grant.likely@secretlab.ca>
37605 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
37606 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37607 Date: Sun Apr 29 14:01:54 2007 +0200
37609 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
37611 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
37612 message. Use PVR to distinguish between the two variants, and print proper CPU
37615 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37616 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37617 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
37619 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
37620 Author: Ladislav Michl <ladis@linux-mips.org>
37621 Date: Wed Apr 25 16:01:26 2007 +0200
37623 [PATCH] simplify silent console
37625 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37626 Acked-by: Stefan Roese <sr@denx.de>
37628 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
37629 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
37630 Date: Mon Apr 23 15:30:39 2007 +0200
37632 [PATCH] Avoid assigning PCI resources from zero address
37634 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
37635 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
37636 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
37637 sentence about "0" being considered an invalid address) -- so, use a reasonable
37638 starting value of 0x1000 (that's what the most Linux archs are using).
37640 Alternatively, one might have fixed the calls to pci_set_region() individually
37641 (some code even seems to have taken care of this issue) but that would have
37642 been a lot more work. :-)
37644 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
37645 Acked-by: Stefan Roese <sr@denx.de>
37647 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
37648 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37649 Date: Mon Apr 23 14:00:11 2007 +0200
37651 [patch] setenv(...) can delete environmentalvariables
37653 update setenv() function so that entering a NULL value for the
37654 variable's value will delete the environmental variable
37656 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37657 Acked-by: Stefan Roese <sr@denx.de>
37659 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
37660 Author: Mike Frysinger <vapier@gentoo.org>
37661 Date: Mon Apr 23 13:54:24 2007 +0200
37663 [patch] use unsigned char in smc91111 driver for mac
37665 the v_mac variable in the smc91111 driver is declared as a signed char ...
37666 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
37667 because when it gets printed out, you get a display like:
37668 0xFFFFFFE0 and that's no good
37670 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
37672 commit ffc50f9bb194343c6303517a517708457a5eb6b8
37673 Author: Michal Simek <monstr@monstr.eu>
37674 Date: Sat May 5 18:54:42 2007 +0200
37676 new: FSL and MSR support #2
37678 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
37679 Author: Michal Simek <monstr@monstr.eu>
37680 Date: Sat May 5 18:27:16 2007 +0200
37682 new: FSL and MSR support
37684 commit 2f15278c2eb911c668b4fe562130b78cf554d139
37685 Author: Wolfgang Denk <wd@denx.de>
37686 Date: Sat May 5 18:23:11 2007 +0200
37688 Coding stylke cleanup; update CHANGELOG.
37690 Signed-off-by: Wolfgang Denk <wd@denx.de>
37692 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
37693 Author: Wolfgang Denk <wd@denx.de>
37694 Date: Sat May 5 18:05:02 2007 +0200
37696 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
37698 Signed-off-by: Wolfgang Denk <wd@denx.de>
37700 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
37701 Author: Wolfgang Denk <wd@denx.de>
37702 Date: Sat May 5 17:15:50 2007 +0200
37704 Make "file" command happy with some config.mk files; update CHANGELOG
37706 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
37707 Author: Jeffrey Mann <mannj@embeddedplanet.com>
37708 Date: Sat May 5 08:32:14 2007 +0200
37710 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
37712 The AMCC Secquoia board has been changed in a new revision from using a
37713 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
37714 indicates the difference. This patch reads that bit and uses the correct
37715 clock speed for the board. This code is backward compatable will all
37716 prior boards. All prior boards will be read as 33.000.
37718 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
37719 Signed-off-by: Stefan Roese <sr@denx.de>
37721 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
37722 Author: Stefan Roese <sr@denx.de>
37723 Date: Sat May 5 08:29:01 2007 +0200
37725 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
37727 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
37728 for the 4k NAND boot image so define bus_frequency to 133MHz here
37729 which is save for the refresh counter setup.
37731 Signed-off-by: Stefan Roese <sr@denx.de>
37733 commit 2f550ab976405300f5b07bf2890800840d0aa05f
37734 Author: Timur Tabi <timur@freescale.com>
37735 Date: Sat May 5 08:12:30 2007 +0200
37737 5xxx: write MAC address to mac-address and local-mac-address
37739 Some device trees have a mac-address property, some have local-mac-address,
37740 and some have both. To support all of these device trees, ftp_cpu_setup()
37741 should write the MAC address to mac-address and local-mac-address, if they
37744 Signed-off-by: Timur Tabi <timur@freescale.com>
37745 Acked-by: Grant Likely <grant.likely@secretlab.ca>
37747 commit a79886590593ba1d667c840caa4940c61639f18f
37748 Author: Thomas Knobloch <knobloch@siemens.com>
37749 Date: Sat May 5 07:04:42 2007 +0200
37751 NAND: Wrong calculation of page number in nand_block_bad()
37753 In case that there is no memory based bad block table available the
37754 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
37755 nand_block_bad() directly. When parameter 'getchip' is set to zero,
37756 nand_block_bad() will not right shift the offset to calculate the
37757 correct page number.
37759 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
37760 Signed-off-by: Stefan Roese <sr@denx.de>
37762 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
37763 Author: Wolfgang Denk <wd@denx.de>
37764 Date: Fri May 4 10:02:33 2007 +0200
37766 Fix initrd length corruption in bootm command.
37768 When using FDT Images, the length of an inital ramdisk was
37769 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
37771 Patches by Timur Tabi & Johns Daniel.
37773 Signed-off-by: Wolfgang Denk <wd@denx.de>
37775 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
37776 Author: Kim Phillips <kim.phillips@freescale.com>
37777 Date: Thu May 3 19:43:52 2007 -0500
37779 mpc83xx: fix trivial error in MAKEALL
37781 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37783 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
37784 Author: Wolfgang Denk <wd@denx.de>
37785 Date: Thu May 3 16:34:41 2007 +0200
37787 Update board configuration for STX GP3SSA board:
37789 Enable hush shell, environment in flash rather in EEPROM,
37790 more user-friendly default environment, etc.
37791 The simple EEPROM environment can be selected easily in the board
37794 Signed-off-by: Wolfgang Denk <wd@denx.de>
37796 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
37797 Author: Wolfgang Denk <wd@denx.de>
37798 Date: Tue Apr 24 14:37:49 2007 +0200
37800 Cleanup STX GP3SSA code; fix build and compile problems.
37802 commit 35171dc04e028ecacc23ad916a66295472555dbf
37803 Author: Dan Malek <dan@embeddedalley.com>
37804 Date: Fri Jan 5 09:15:34 2007 +0100
37806 Add support for STX GP3SSA (stxssa) Board
37808 Signed-off-by Dan Malek, <dan@embeddedalley.com>
37810 commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
37811 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
37812 Date: Wed May 2 13:31:53 2007 +0200
37814 macb: Don't restart autonegotiation if we already have link
37816 Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
37817 link is already up.
37819 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
37821 commit 04fcb5d38bc90779cd9a710d60702075986f0e29
37822 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
37823 Date: Wed May 2 13:22:38 2007 +0200
37825 macb: Introduce a few barriers when dealing with DMA descriptors
37827 There were a few theoretical possibilities that the compiler might
37828 optimize away DMA descriptor reads and/or writes and thus cause
37829 synchronization problems with the hardware. Insert barriers where
37830 we depend on reads/writes actually hitting memory.
37832 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
37834 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
37835 Author: Andy Fleming <afleming@freescale.com>
37836 Date: Sat Feb 24 01:08:13 2007 -0600
37838 Cleaned up some 85xx PCI bugs
37840 * Cleaned up the CDS PCI Config Tables and added NULL entries to
37842 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
37843 * Fixed 85xx PCI code to assign powar region sizes based on the
37844 config values (rather than hard-coding them)
37845 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
37847 Signed-off-by: Andy Fleming <afleming@freescale.com>
37849 commit 6743105988fc44d5b0d30388c790607835aae7a6
37850 Author: Andy Fleming <afleming@freescale.com>
37851 Date: Mon Apr 23 02:54:25 2007 -0500
37853 Add support for the 8568 MDS board
37855 This included some changes to common files:
37856 * Add 8568 processor SVR to various places
37857 * Add support for setting the qe bus-frequency value in the dts
37858 * Add the 8568MDS target to the Makefile
37860 Signed-off-by: Andy Fleming <afleming@freescale.com>
37862 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
37863 Author: David Updegraff <dave@cray.com>
37864 Date: Fri Apr 20 14:34:48 2007 -0500
37866 Add support for treating unknown PHYs as generic PHYs.
37868 When bringing up u-boot on new boards, PHY support sometimes gets
37869 neglected. Most PHYs don't really need any special support,
37870 though. By adding a generic entry that always matches if nothing
37871 else does, we can provide support for "unsupported" PHYs for the
37874 The generic PHY driver supports most PHYs, including gigabit.
37876 Signed-off-by: David Updegraff <dave@cray.com>
37877 Signed-off-by: Andy Fleming <afleming@freescale.com>
37879 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
37880 Author: James Yang <James.Yang@freescale.com>
37881 Date: Wed Feb 7 15:28:04 2007 -0600
37883 Conditionalize 8641 Rev1.0 MCM workarounds
37885 Signed-off-by: James Yang <James.Yang@freescale.com>
37886 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37888 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
37889 Author: Timur Tabi <timur@freescale.com>
37890 Date: Mon Apr 30 13:59:50 2007 -0500
37892 Fix memory initialization on MPC8349E-mITX
37894 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
37895 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
37896 on some ITX boards, notably those with a revision 3.1 CPU.
37898 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
37899 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
37901 Signed-off-by: Timur Tabi <timur@freescale.com>
37902 Acked-by: Michael Benedict <MBenedict@twacs.com>
37903 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37905 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
37906 Author: Kim Phillips <kim.phillips@freescale.com>
37907 Date: Mon Apr 30 15:26:21 2007 -0500
37909 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
37911 and fix CPU: to align with Board: display text.
37913 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
37915 commit c1ab82669d9525998c34e802a12cad662723f22a
37916 Author: James Yang <James.Yang@freescale.com>
37917 Date: Fri Mar 16 13:02:53 2007 -0500
37919 Rewrote picos_to_clk() to avoid rounding errors.
37920 Clarified that conversion is to DRAM clocks rather than platform clocks.
37921 Made function static to spd_sdram.c.
37923 Signed-off-by: James Yang <James.Yang@freescale.com>
37924 Signed-off-by: Jon Loeliger <jdl@freescale.com>
37926 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
37927 Author: Stefan Roese <sr@denx.de>
37928 Date: Sun Apr 29 14:13:01 2007 +0200
37930 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
37932 Signed-off-by: Stefan Roese <sr@denx.de>
37934 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
37935 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37936 Date: Sun Apr 29 14:01:54 2007 +0200
37938 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
37940 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
37941 message. Use PVR to distinguish between the two variants, and print proper CPU
37944 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
37945 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
37946 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
37948 commit 5c5d3242935cf3543af01142627494434834cf98
37949 Author: Kim Phillips <kim.phillips@freescale.com>
37950 Date: Wed Apr 25 12:34:38 2007 -0500
37952 mpc83xx: minor fixups for 8313rdb introduction
37954 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
37955 Author: Ladislav Michl <ladis@linux-mips.org>
37956 Date: Wed Apr 25 16:01:26 2007 +0200
37958 [PATCH] simplify silent console
37960 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
37961 Acked-by: Stefan Roese <sr@denx.de>
37963 commit 144876a380f5756f57412caf74c1d6dc201dd796
37964 Author: Michal Simek <monstr@monstr.eu>
37965 Date: Tue Apr 24 23:01:02 2007 +0200
37967 [PATCH] MTD partition support, JFFS2 support
37969 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
37970 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37971 Date: Tue Apr 24 14:03:45 2007 +0200
37973 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
37975 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
37977 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
37978 Author: Andy Fleming <afleming@freescale.com>
37979 Date: Mon Apr 23 02:37:47 2007 -0500
37981 Reworked 85xx speed detection code
37983 Changed the code to read the registers and calculate the clock
37984 rates, rather than using a "switch" statement.
37986 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
37988 Signed-off-by: Andy Fleming <afleming@freescale.com>
37990 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
37991 Author: Andy Fleming <afleming@freescale.com>
37992 Date: Mon Apr 23 02:24:28 2007 -0500
37994 Enable 8544 support
37996 * Add support to the Makefile
37997 * Add 8544 configuration support to the tsec driver
37998 * Add 8544 SVR numbers to processor.h
38000 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38001 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38003 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
38004 Author: Andy Fleming <afleming@freescale.com>
38005 Date: Fri Feb 23 17:12:25 2007 -0600
38007 Support 1G size on 8548
38009 e500v2 and newer cores support 1G page sizes.
38011 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38012 Signed-off-by: Andy Fleming <afleming@freescale.com>
38014 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
38015 Author: Andy Fleming <afleming@freescale.com>
38016 Date: Fri Feb 23 17:11:16 2007 -0600
38018 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
38020 The other pagesz constants use one letter to specify order of
38021 magnitude. Also change the one reference to it in mpc8548cds/init.S
38023 Signed-off-by: Andy Fleming <afleming@freescale.com>
38025 commit 1f9a318cea14272edd10d63739e2d326c90f430e
38026 Author: Andy Fleming <afleming@freescale.com>
38027 Date: Fri Feb 23 16:28:46 2007 -0600
38029 Only set ddrioovcr for 8548 rev1.
38031 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38032 Signed-off-by: Andy Fleming <afleming@freescale.com>
38034 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
38035 Author: Andy Fleming <afleming@freescale.com>
38036 Date: Sat Feb 24 01:16:45 2007 -0600
38038 Tweak DDR ECC error counter
38040 Enable single-bit error counter when memory was cleared by ddr controller.
38042 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38043 Signed-off-by: Andy Fleming <afleming@freescale.com>
38045 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
38046 Author: Timur Tabi <timur@freescale.com>
38047 Date: Mon Feb 12 13:34:55 2007 -0600
38049 85xx: write MAC address to mac-address and local-mac-address
38051 Some device trees have a mac-address property, some have local-mac-address,
38052 and some have both. To support all of these device trees, ftp_cpu_setup()
38053 should write the MAC address to mac-address and local-mac-address, if they
38056 Signed-off-by: Timur Tabi <timur@freescale.com>
38058 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
38059 Author: Andy Fleming <afleming@freescale.com>
38060 Date: Mon Apr 23 01:44:44 2007 -0500
38062 Some 85xx cpu cleanups
38064 * Cleaned up the TSR[WIS] clearing
38065 * Cleaned up DMA initialization
38067 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38068 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38069 Acked-by: Andy Fleming <afleming@freescale.com>
38071 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
38072 Author: Andy Fleming <afleming@freescale.com>
38073 Date: Mon Apr 23 01:32:22 2007 -0500
38075 Add cpu support for the 8544
38077 Recognize new SVR values, and add a few register definitions
38079 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38080 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38081 Acked-by: Andy Fleming <afleming@freescale.com>
38083 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
38084 Author: Jon Loeliger <jdl@freescale.com>
38085 Date: Wed Apr 11 16:51:02 2007 -0500
38087 Add MPC8544DS basic port board files.
38089 Add board port under new board/freescale directory
38090 structure and reuse existing PIXIS FPGA support there.
38092 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38093 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38095 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
38096 Author: Jon Loeliger <jdl@freescale.com>
38097 Date: Wed Apr 11 16:50:57 2007 -0500
38099 Add MPC8544DS main configuration file.
38101 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38102 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38104 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
38105 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38106 Date: Wed Dec 27 22:07:15 2006 +0300
38108 Fix PCI I/O space mapping on Freescale MPC85x0ADS
38110 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
38111 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
38112 describing the local address window used for the PCI I/O space accesses -- fix
38113 this and carry over the necessary changes into the MPC8560ADS code since the
38114 PCI I/O space mapping was also broken for this board (by the earlier commit
38115 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
38116 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
38118 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38120 board/mpc8540ads/init.S | 4 ++--
38121 board/mpc8560ads/init.S | 4 ++--
38122 include/configs/MPC8540ADS.h | 5 ++---
38123 include/configs/MPC8541CDS.h | 2 +-
38124 include/configs/MPC8548CDS.h | 2 +-
38125 include/configs/MPC8560ADS.h | 8 ++++----
38126 6 files changed, 12 insertions(+), 13 deletions(-)
38128 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
38129 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38130 Date: Tue Dec 5 16:42:30 2006 +0800
38132 u-boot: Fix e500 v2 core reset bug
38134 The following patch fixes the e500 v2 core reset bug.
38135 For e500 v2 core, a new reset control register is added to reset the
38138 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38140 commit 63247a5acd58032e6cf33f525bc3923b467bac88
38141 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38142 Date: Wed Dec 20 11:01:00 2006 +0800
38144 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
38146 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
38147 entry number to control the loop. This can reduce the potential risk
38148 for the 85xx processor increasing its TLB adn LAW entry number.
38150 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
38151 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38153 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
38154 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38155 Date: Mon Dec 18 17:01:04 2006 +0800
38157 u-boot: Fix the 85xxcds tsec bug
38159 Fix the 85xxcds tsec bug.
38160 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
38162 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38164 commit 7337b237ffc4aaf1b9467024fe472a880d852598
38165 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38166 Date: Fri Dec 15 14:43:31 2006 +0800
38168 u-boot: Fix CPU2 errata on MPC8548CDS board
38170 This patch apply workaround of CPU2 errata on MPC8548CDS board.
38172 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
38174 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
38175 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
38176 Date: Mon Dec 18 16:25:15 2006 +0800
38178 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
38180 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
38182 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
38184 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
38185 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
38186 Date: Thu Dec 14 14:14:55 2006 +0800
38188 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
38190 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
38192 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
38194 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
38195 Author: Scott Wood <scottwood@freescale.com>
38196 Date: Mon Apr 16 14:54:15 2007 -0500
38198 mpc83xx: Add MPC8313ERDB support.
38200 Signed-off-by: Scott Wood <scottwood@freescale.com>
38202 commit 49ea3b6eafe606285ae4d5c378026153dde53200
38203 Author: Scott Wood <scottwood@freescale.com>
38204 Date: Mon Apr 16 14:34:21 2007 -0500
38206 mpc83xx: Add generic PCI setup code.
38208 Board code can now request the generic setup code rather than having to
38209 copy-and-paste it for themselves. Boards should be converted to use this
38210 once they're tested with it.
38212 Signed-off-by: Scott Wood <scottwood@freescale.com>
38214 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
38215 Author: Scott Wood <scottwood@freescale.com>
38216 Date: Mon Apr 16 14:34:19 2007 -0500
38218 mpc83xx: Add 831x support to speed.c.
38220 Signed-off-by: Scott Wood <scottwood@freescale.com>
38222 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
38223 Author: Scott Wood <scottwood@freescale.com>
38224 Date: Mon Apr 16 14:34:18 2007 -0500
38226 mpc83xx: Add 831x support to global_data.h
38228 Signed-off-by: Scott Wood <scottwood@freescale.com>
38230 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
38231 Author: Scott Wood <scottwood@freescale.com>
38232 Date: Mon Apr 16 14:34:16 2007 -0500
38234 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
38236 Rather than misleadingly define PVR_83xx as the specific type of 83xx
38237 being built for, the PVR of each core revision is defined. checkcpu() now
38238 prints the core that it detects, rather than aborting if it doesn't find
38239 what it thinks it wants.
38241 Signed-off-by: Scott Wood <scottwood@freescale.com>
38243 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
38244 Author: Scott Wood <scottwood@freescale.com>
38245 Date: Mon Apr 16 14:34:15 2007 -0500
38247 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
38249 Signed-off-by: Scott Wood <scottwood@freescale.com>
38251 commit d87c57b201b4572d16f1b642998faa00c9912b16
38252 Author: Scott Wood <scottwood@freescale.com>
38253 Date: Mon Apr 16 14:31:55 2007 -0500
38255 mpc83xx: Add register definitions for MPC831x.
38257 Signed-off-by: Scott Wood <scottwood@freescale.com>
38259 commit 7fc4c71a143be8666d70803fb25ae60379c95622
38260 Author: Stefan Roese <sr@denx.de>
38261 Date: Mon Apr 23 15:39:59 2007 +0200
38265 Signed-off-by: Stefan Roese <sr@denx.de>
38267 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
38268 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38269 Date: Mon Apr 23 15:30:39 2007 +0200
38271 [PATCH] Avoid assigning PCI resources from zero address
38273 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
38274 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
38275 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
38276 sentence about "0" being considered an invalid address) -- so, use a reasonable
38277 starting value of 0x1000 (that's what the most Linux archs are using).
38279 Alternatively, one might have fixed the calls to pci_set_region() individually
38280 (some code even seems to have taken care of this issue) but that would have
38281 been a lot more work. :-)
38283 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
38284 Acked-by: Stefan Roese <sr@denx.de>
38286 commit afb903a2eb9436baa9270ccc0c27082d86497d89
38287 Author: Jeffrey Mann <mannj@embeddedplanet.com>
38288 Date: Mon Apr 23 14:00:11 2007 +0200
38290 [patch] setenv(...) can delete environmentalvariables
38292 update setenv() function so that entering a NULL value for the
38293 variable's value will delete the environmental variable
38295 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
38296 Acked-by: Stefan Roese <sr@denx.de>
38298 commit 36f104e5caa747d568eff26b369565af57c2ffa6
38299 Author: Mike Frysinger <vapier@gentoo.org>
38300 Date: Mon Apr 23 13:54:24 2007 +0200
38302 [patch] use unsigned char in smc91111 driver for mac
38304 the v_mac variable in the smc91111 driver is declared as a signed char ...
38305 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
38306 because when it gets printed out, you get a display like:
38307 0xFFFFFFE0 and that's no good
38309 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
38311 commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
38312 Author: Rodolfo Giometti <giometti@enneenne.com>
38313 Date: Mon Apr 23 13:10:52 2007 +0200
38315 USB: (Another) delay for crappy USB keys.
38317 Some USB keys are slow in giving back an answer when the Root HUB
38318 enables power lines.
38320 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
38322 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
38323 Author: Stefan Roese <sr@denx.de>
38324 Date: Mon Apr 23 12:00:22 2007 +0200
38326 Remove BOARDLIBS usage completely
38328 Signed-off-by: Stefan Roese <sr@denx.de>
38330 commit 32556443840f127170e4baa8bdd5b567039f6c36
38331 Author: Michal Simek <monstr@monstr.eu>
38332 Date: Sat Apr 21 21:07:22 2007 +0200
38334 [PATCH] SystemACE support for Microblaze
38336 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
38337 Author: Michal Simek <monstr@monstr.eu>
38338 Date: Sat Apr 21 21:02:40 2007 +0200
38340 16bit read/write little endian
38342 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
38343 Author: Michal Simek <monstr@monstr.eu>
38344 Date: Sat Apr 21 20:53:31 2007 +0200
38346 Change ML401 parameters - Xilinx BSP
38348 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
38349 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
38350 Date: Wed Feb 28 05:37:29 2007 -0600
38352 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
38354 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
38356 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
38357 Author: Zhang Wei <wei.zhang@freescale.com>
38358 Date: Fri Jan 19 10:42:37 2007 +0800
38360 Enable LAWs for MPC8641 PCI-Ex2.
38362 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
38363 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38365 commit bd7851ce1e1f140665b520026abf1042968b1102
38366 Author: Jon Loeliger <jdl@freescale.com>
38367 Date: Fri Apr 20 14:12:26 2007 -0500
38369 mpc86xx; Write MAC address to mac-address and local-mac-address
38371 Some device trees have a mac-address property, some have local-mac-address,
38372 and some have both. To support all of these device trees, ftp_cpu_setup()
38373 should write the MAC address to mac-address and local-mac-address, if they
38376 Signed-off-by: Timur Tabi <timur@freescale.com>
38377 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38379 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
38380 Author: Jon Loeliger <jdl@freescale.com>
38381 Date: Fri Apr 20 14:11:38 2007 -0500
38383 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
38385 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
38386 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38388 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
38389 Author: Wolfgang Denk <wd@denx.de>
38390 Date: Fri Apr 20 17:43:28 2007 +0200
38392 Cleanup compiler warnings, update CHANGELOG
38394 Signed-off-by: Wolfgang Denk <wd@denx.de>
38396 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
38397 Author: Detlev Zundel <dzu@denx.de>
38398 Date: Fri Apr 20 12:01:47 2007 +0200
38400 Fix breakage of NC650 board with respect to nand support.
38402 Signed-off-by: Detlev Zundel <dzu@denx.de>
38404 commit 39f23cd90947639ac278a18ff277ec786b5ac167
38405 Author: Domen Puncer <domen.puncer@telargo.com>
38406 Date: Fri Apr 20 11:13:16 2007 +0200
38408 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
38410 G2 core reference manual says decrementer and time base
38411 are decreasing/increasing once every 4 bus clock cycles.
38412 Lets fix it, so time in Linux won't run twice as fast
38414 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38415 Acked-by: Grant Likely <grant.likely@secretlab.ca>
38417 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
38418 Author: Gerald Van Baren <vanbaren@cideas.com>
38419 Date: Thu Apr 19 23:14:39 2007 -0400
38421 Fix serious pointer bug with bootm and reserve map.
38423 What was suppose to be a stack variable was declared as a pointer,
38424 overwriting random memory.
38425 Also moved the libfdt.a requirement into the main Makefile. That is
38428 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
38429 Author: Stefan Roese <sr@denx.de>
38430 Date: Thu Apr 19 09:53:52 2007 +0200
38432 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
38434 Previous versions used full wait states for the chip select #1 which
38435 is connected to the Xilinix SystemACE controller on the AMCC Katmai
38436 evaluation board. This leads to really slow access and therefore low
38437 performance. This patch now sets up the chip select a lot faster
38438 resulting in much better read/write performance of the Linux driver.
38440 Signed-off-by: Stefan Roese <sr@denx.de>
38442 commit 37837828d89084879bee2f2b8c7c68d4695940df
38443 Author: Wolfgang Denk <wd@denx.de>
38444 Date: Wed Apr 18 17:49:29 2007 +0200
38446 Clenaup, update CHANGELOG
38448 Signed-off-by: Wolfgang Denk <wd@denx.de>
38450 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
38451 Author: Wolfgang Denk <wd@denx.de>
38452 Date: Wed Apr 18 17:20:58 2007 +0200
38456 Signed-off-by: Wolfgang Denk <wd@denx.de>
38458 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
38459 Author: Wolfgang Denk <wd@denx.de>
38460 Date: Wed Apr 18 17:07:26 2007 +0200
38462 Cleanup, update CHANGELOG
38464 Sigend-off-by: Wolfgang Denk <wd@denx.de>
38466 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
38467 Author: Wolfgang Denk <wd@denx.de>
38468 Date: Wed Apr 18 16:17:46 2007 +0200
38472 commit ad4eb555671d97f96dc56eab55103b1f86874b01
38473 Author: Wolfgang Denk <wd@denx.de>
38474 Date: Wed Apr 18 14:30:39 2007 +0200
38476 MCC200 board: remove warning which is obsolete after PSoC firmware changes
38478 Signed-off-by: Wolfgang Denk <wd@denx.de>
38480 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
38481 Author: Domen Puncer <domen.puncer@telargo.com>
38482 Date: Wed Apr 18 12:11:05 2007 +0200
38484 [PATCH] icecube/lite5200b: document wakeup from low-power support
38486 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38488 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
38489 Author: Stefan Roese <sr@denx.de>
38490 Date: Wed Apr 18 12:07:47 2007 +0200
38492 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
38494 Signed-off-by: Stefan Roese <sr@denx.de>
38496 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
38497 Author: Stefan Roese <sr@denx.de>
38498 Date: Wed Apr 18 12:05:59 2007 +0200
38500 ppc4xx: Add output for bootrom location to 405EZ ports
38502 Now 405EZ ports also show upon bootup from which boot device
38503 they are configured to boot:
38505 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
38507 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
38508 Bootstrap Option E - Boot ROM Location EBC (32 bits)
38509 16 kB I-Cache 16 kB D-Cache
38510 Board: Acadia - AMCC PPC405EZ Evaluation Board
38512 Signed-off-by: Stefan Roese <sr@denx.de>
38514 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
38515 Author: Peter Pearse <peter.pearse@arm.com>
38516 Date: Tue Apr 17 13:30:33 2007 +0100
38518 Move ppearse to ARM board list
38519 Add Konstantin Kletschke for scb9328.
38520 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
38522 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
38523 Author: Domen Puncer <domen.puncer@telargo.com>
38524 Date: Mon Apr 16 14:00:13 2007 +0200
38526 [PATCH] icecube/lite5200b: wakeup from low-power support
38528 U-Boot part of Lite5200b low power mode support.
38529 Puts SDRAM out of self-refresh and transfers control to
38530 address saved at physical 0x0.
38532 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
38533 Acked-by: Grant Likely <grant.likely@secretlab.ca>
38535 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
38536 Author: Gerald Van Baren <vanbaren@cideas.com>
38537 Date: Sun Apr 15 13:54:26 2007 -0400
38539 Fix the ft_cpu_setup() property settings.
38541 Use "setter" functions instead of flags, cleaner and more flexible.
38542 It also fixes the problem noted by Timur Tabi that the ethernet MAC
38543 addresses were all being set incorrectly to the same MAC address.
38545 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
38546 Author: Gerald Van Baren <vanbaren@cideas.com>
38547 Date: Sat Apr 14 22:51:24 2007 -0400
38549 Improve the bootm command for CONFIG_OF_LIBFDT
38551 In bootm, create the "/chosen" node only if it doesn't already exist
38552 (better matches the previous behavior).
38553 Update for proper reserved memory map handling for initrd.
38555 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
38556 Author: Gerald Van Baren <vanbaren@cideas.com>
38557 Date: Sat Apr 14 22:46:41 2007 -0400
38559 Add some utilities to manipulate the reserved memory map.
38561 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
38562 Author: Wolfgang Denk <wd@denx.de>
38563 Date: Sat Apr 14 21:16:54 2007 +0200
38567 commit 8e6875183cdca91c134408d119d4abcd48ef6856
38568 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38569 Date: Sun Dec 17 18:56:46 2006 +0100
38571 AVR32: Enable MMC support
38573 Set up the portmux for the MMC interface and enable the MMC driver
38574 along with support for DOS partitions, ext2 and FAT filesystems.
38576 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38578 commit fc26c97bb6df41b4a95662c34054fe912387bf38
38579 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38580 Date: Fri Jan 20 10:03:53 2006 +0100
38584 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
38586 The AT91 ARM-based CPUs use basically the same hardware, so it should
38587 be possible to share this driver, but no effort has been made so far.
38589 Hardware documentation can be found in the AT32AP7000 data sheet,
38590 which can be downloaded from
38592 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
38594 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38596 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
38597 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38598 Date: Sun Dec 17 18:55:37 2006 +0100
38600 AVR32: Add clk and gpio infrastructure for mmci
38602 Implement functions for configuring the mmci pins, as well as
38603 functions for getting the clock rate of the mmci controller.
38605 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38607 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
38608 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38609 Date: Sun Dec 17 18:53:56 2006 +0100
38611 Enable partition support with MMC
38613 Include implementations of init_part() and get_partition_info() when
38616 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38618 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
38619 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38620 Date: Sun Dec 17 17:14:30 2006 +0100
38622 AVR32: Enable networking
38624 Implement MACB initialization for AVR32 and ATSTK1000, and turn
38625 everything on, including the MACB driver.
38627 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38629 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
38630 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38631 Date: Fri Jan 20 10:03:34 2006 +0100
38633 Atmel MACB ethernet driver
38635 Driver for the Atmel MACB on-chip ethernet controller.
38637 This driver has been tested on the ATSTK1000 board with a AT32AP7000
38638 CPU. It should probably work on AT91SAM926x as well with some minor
38641 Hardware documentation can be found in the AT32AP7000 data sheet,
38642 which can be downloaded from
38644 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
38646 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38648 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
38649 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38650 Date: Sun Dec 17 16:56:14 2006 +0100
38652 AVR32: Add clk and gpio infrastructure for macb0 and macb1
38654 Implement functions for configuring the macb0 and macb1 pins, as
38655 well as functions for getting the clock rate of the various
38656 busses the macb ethernet controllers are connected to.
38658 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38660 commit d5acb95b16a0a74c643524342c3437e765426d05
38661 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38662 Date: Sun Dec 17 15:39:15 2006 +0100
38664 AVR32: Implement simple DMA memory allocator
38666 Implement dma_alloc_coherent() which returns cache-aligned
38667 uncacheable memory.
38669 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38671 commit 91975b0fea773c9e681fea8cf3349669f27685ee
38672 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38673 Date: Sun Dec 17 15:46:02 2006 +0100
38675 Import <linux/mii.h> from the Linux kernel
38677 Instead of creating yet another set of MII register definitions
38678 in the macb driver, here's a complete set of definitions for everyone
38681 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38683 commit 1b804b229556a4d862da93c0ec94e79419364b2c
38684 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38685 Date: Wed Mar 21 19:47:36 2007 +0100
38687 AVR32: Include more commands for ATSTK1000
38689 Include the imi, imls and jffs commands sets by default on ATSTK1000.
38690 Also define CONFIG_BOOTARGS to something more useful, define
38691 CONFIG_BOOTCOMMAND and enable autoboot by default.
38693 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38695 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
38696 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38697 Date: Wed Mar 21 19:44:48 2007 +0100
38699 AVR32: Provide a definition of struct stat
38701 Copy the definition of struct stat from the Linux kernel.
38703 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38705 commit 12f099c08167a7a51aeee623bc16dafd0841271c
38706 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38707 Date: Sun Dec 17 14:46:06 2006 +0100
38709 AVR32: Use initdram() instead of board_init_memories()
38711 Conform to the "standard" interface and use initdram() instead of
38712 board_init_memories() on AVR32. This enables us to get rid of the
38713 sdram_size member of the global_data struct as well.
38715 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38717 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
38718 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38719 Date: Mon Nov 20 15:53:10 2006 +0100
38721 AVR32: Relocate u-boot to SDRAM
38723 Relocate the u-boot image into SDRAM like everyone else does. This
38724 means that we can handle much larger .data and .bss than we used to.
38726 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38728 commit df548d3c3e2bbc40258713167859ffc2ce99a900
38729 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38730 Date: Sun Nov 19 18:06:53 2006 +0100
38732 AVR32: Resource management rewrite
38734 Rewrite the resource management code (i.e. I/O memory, clock gating,
38735 gpio) so it doesn't depend on any global state. This is necessary
38736 because this code is heavily used before relocation to RAM, so we
38737 can't write to any global variables.
38739 As an added bonus, this makes u-boot's memory footprint a bit smaller,
38740 although some functionality has been left out; all clocks are enabled
38741 all the time, and there's no checking for gpio line conflicts.
38743 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38745 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
38746 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38747 Date: Sat Nov 18 18:01:13 2006 +0100
38749 AVR32: Clean up memory-map.h for at32ap7000
38751 Convert spaces to tabs (must have missed this one last time around),
38752 sort the entries by address and group them together by bus
38755 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38757 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
38758 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38759 Date: Sat Nov 18 17:32:31 2006 +0100
38761 AVR32: Build position-independent u-boot
38763 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
38764 position independent. This will make relocation a lot easier.
38766 -mno-init-got means that gcc shouldn't emit code to load the GOT
38767 address into r6 in every function prologue. We do it once and for
38768 all in the early startup assembly code, so enabling this option
38769 makes u-boot a bit faster and smaller.
38771 The assembly parts have always been position-independent, so no code
38772 changes should be necessary.
38774 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38776 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
38777 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38778 Date: Sat Nov 18 17:24:31 2006 +0100
38780 AVR32: Use avr32-linux- cross-compilation prefix by default
38782 It doesn't really matter which toolchain you use to compile u-boot,
38783 but the avr32-linux one is probably what most people have installed.
38785 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38787 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
38788 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
38789 Date: Sat Nov 18 17:15:30 2006 +0100
38791 AVR32: Split start_u_boot into board_init_f and board_init_r
38793 Split the avr32 initialization code into a function to run before
38794 relocation, board_init_f and a function to run after relocation,
38795 board_init_r. For now, board_init_f simply calls board_init_r
38798 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
38800 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
38801 Author: Heiko Schocher <hs@pollux.denx.de>
38802 Date: Sat Apr 14 05:26:48 2007 +0200
38804 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
38805 clear the Display after reset.
38807 Signed-off-by: Heiko Schocher <hs@denx.de>
38809 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
38810 Author: Denis Peter <d.peter@mpl.ch>
38811 Date: Fri Apr 13 09:13:33 2007 +0200
38813 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
38815 Fix bug introduced by "Fix get_partition_info() parameter error in all
38816 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
38817 to use diskboot or scsiboot form another device than 0.
38819 Signed-off-by: Denis Peter <d.peter@mpl.ch>
38821 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
38822 Author: Greg Lopp <lopp@pobox.com>
38823 Date: Fri Apr 13 08:02:24 2007 +0200
38825 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
38827 Signed-of-by: Greg Lopp <lopp@pobox.com>
38828 Acked-by: Grant Likely <grant.likely@secretlab.ca>
38830 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
38831 Author: Xie Xiaobo <r63061@freescale.com>
38832 Date: Fri Mar 9 19:08:25 2007 +0800
38834 Fix two bugs for MPC83xx DDR2 controller SPD Init
38836 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
38837 the first bug is that the picos_to_clk routine introduces a huge
38838 rounding error in 83xx.
38839 the second bug is that the mode register write recovery field is
38840 tWR-1, not tWR >> 1.
38842 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
38843 Author: Jeffrey Mann <mannj@embeddedplanet.com>
38844 Date: Thu Apr 12 14:15:59 2007 +0200
38846 ppc4xx: Fix i2c divisor calcularion for PPC4xx
38848 This patch fixes changes the i2c_init(...) function to use the function
38849 get_OPB_freq() rather than calculating the OPB speed by
38850 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
38851 specific per processor. The prior method was not and so was calculating
38852 the wrong speed for some PPC4xx processors.
38854 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
38855 Signed-off-by: Stefan Roese <sr@denx.de>
38857 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
38858 Author: Wolfgang Denk <wd@denx.de>
38859 Date: Wed Apr 11 17:25:01 2007 +0200
38863 Signed-off-by: Wolfgang Denk <wd@denx.de>
38865 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
38866 Author: Wolfgang Denk <wd@denx.de>
38867 Date: Wed Apr 11 17:22:55 2007 +0200
38869 Update for SC3 board
38871 * Make IDE timeout configurable through ide_reset_timeout variable.
38872 * Use Newline as "password" string
38873 * Use just a single partition in NAND flash
38875 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
38876 Author: Haiying Wang <haiying.wang@freescale.com>
38877 Date: Mon Jan 22 12:37:30 2007 -0600
38879 Add PIXIS FPGA support for MPC8641HPCN board.
38881 Move the 8641HPCN's PIXIS code to the new directory
38882 board/freescale/common/ as it will be shared by
38883 future boards not in the same processor family.
38885 Write a "pixis_reset" command that utilizes the FPGA
38886 reset sequencer to support alternate soft-reset options
38887 such as using the "alternate" flash bank, enabling
38888 the watch dog, or choosing different CPU frequencies.
38890 Add documentation for the pixis_reset to README.mpc8641hpcn.
38892 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
38893 Signed-off-by: Jon Loeliger <jdl@freescale.com>
38895 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
38896 Author: Gerald Van Baren <vanbaren@cideas.com>
38897 Date: Fri Apr 6 14:19:43 2007 -0400
38899 Moved fdt command support code to fdt_support.c
38901 ...in preparation for improving the bootm command's handling of fdt blobs.
38902 Also cleaned up some coding sloppiness.
38904 commit 6679f9299534e488a171a9bb8f9bb891de247aab
38905 Author: Gerald Van Baren <vanbaren@cideas.com>
38906 Date: Fri Apr 6 14:17:14 2007 -0400
38908 libfdt: Make fdt_check_header() public
38910 Changed _fdt_check_header() to fdt_check_header() and made it part of
38911 the interface - it is a useful routine.
38913 Also did some asthetics cleanup to the include files (headers).
38915 commit c0707ce65677650b5ceab0500ee50ae5168afef2
38916 Author: Aubrey Li <aubrey.adi@gmail.com>
38917 Date: Thu Apr 5 18:34:06 2007 +0800
38919 [Blackfin][PATCH] Kill off a bunch of common local prototypes
38921 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
38922 Author: Aubrey Li <aubrey.adi@gmail.com>
38923 Date: Thu Apr 5 18:33:04 2007 +0800
38925 [Blackfin][PATCH] Fix dynamic CPLB generation issue
38927 commit 0445e3a264251d75b1be45ef713c70726a2952f0
38928 Author: Aubrey Li <aubrey.adi@gmail.com>
38929 Date: Thu Apr 5 18:31:47 2007 +0800
38931 [Blackfin][PATCH] minior cleanup
38933 commit 155fd766573981090e638b493d5857562151862e
38934 Author: Aubrey Li <aubrey.adi@gmail.com>
38935 Date: Thu Apr 5 18:31:18 2007 +0800
38937 [Blackfin][PATCH] Fix copyright and update license
38939 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
38940 Author: Aubrey Li <aubrey.adi@gmail.com>
38941 Date: Thu Apr 5 18:30:25 2007 +0800
38943 [Blackfin][PATCH] Add BF537 EMAC driver initialization
38945 commit 889256e8604e0c68db1d866d720894dffede9df6
38946 Author: Aubrey Li <aubrey.adi@gmail.com>
38947 Date: Thu Apr 5 18:29:55 2007 +0800
38949 [Blackfin][PATCH] call real the system synchronize instruction
38951 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
38952 Author: Aubrey Li <aubrey.adi@gmail.com>
38953 Date: Thu Apr 5 18:29:17 2007 +0800
38955 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
38957 commit dfeeab2cd680df047e68e723b246adf6f33bb556
38958 Author: Aubrey Li <aubrey.adi@gmail.com>
38959 Date: Thu Apr 5 18:28:34 2007 +0800
38961 [Blackfin][PATCH]: fix flash unaligned copy issue
38963 commit 443feb740584e406efa203af909fe2926608e8d5
38964 Author: Igor Marnat <marny@rambler.ru>
38965 Date: Wed Mar 21 09:55:01 2007 +0300
38967 Update usage of 'nc' in README.NetConsole
38969 Added information about usage of NetConsole on systems where the -l and -p
38970 switches are mutually exclusive.
38972 Signed-off-by: Igor Marnat <marny@rambler.ru>
38973 Signed-off-by: Ben Warren <bwarren@qstreams.com>
38975 commit 31c98a88228021b314c89ebb8104fb6473da4471
38976 Author: Wolfgang Denk <wd@denx.de>
38977 Date: Wed Apr 4 02:09:30 2007 +0200
38979 Minor coding style cleanup.
38981 commit 94abd7c0583ebe01e799b25f451201deeaab550d
38982 Author: Wolfgang Denk <wd@denx.de>
38983 Date: Wed Apr 4 01:49:15 2007 +0200
38987 commit 822af351ad2babc7d99033361a5fcacd30f6bc78
38988 Author: Rodolfo Giometti <giometti@enneenne.com>
38989 Date: Tue Apr 3 14:27:18 2007 +0200
38991 Support for the Philips ISP116x HCD (Host Controller Driver)
38993 Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
38995 commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
38996 Author: Markus Klotzbuecher <mk@denx.de>
38997 Date: Tue Apr 3 14:27:08 2007 +0200
38999 USB: cleanup monahans usb support. Remove dead code.
39001 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39003 commit a65c5768e5537530bd1780af3d3fddc3113a163c
39004 Author: Stefan Roese <sr@denx.de>
39005 Date: Mon Apr 2 10:09:30 2007 +0200
39007 ppc4xx: Change SysACE address on Katmai
39009 With this new base address of the Xilinx SystemACE controller
39010 the Linux driver will be easier to adapt, since it can now be
39011 mapped via the "normal" ioremap() call.
39013 Signed-off-by: Stefan Roese <sr@denx.de>
39015 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
39016 Author: Gerald Van Baren <vanbaren@cideas.com>
39017 Date: Sat Mar 31 14:30:53 2007 -0400
39019 Fix some minor whitespace violations.
39021 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
39022 Author: Gerald Van Baren <vanbaren@cideas.com>
39023 Date: Sat Mar 31 12:23:51 2007 -0400
39025 Add a flattened device tree (fdt) command (2 of 2)
39027 Modifications to the existing code to support the new fdt command.
39029 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
39030 Author: Gerald Van Baren <vanbaren@cideas.com>
39031 Date: Sat Mar 31 12:22:10 2007 -0400
39033 Add a flattened device tree (fdt) command (1 of 2)
39035 The fdt command uses David Gibson's libfdt library to manipulate as well
39036 as print the flattened device tree. This patch is the new command,
39037 the second part is the modifications to the existing code.
39039 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
39040 Author: Gerald Van Baren <vanbaren@cideas.com>
39041 Date: Sat Mar 31 12:13:43 2007 -0400
39043 libfdt: Enhanced and published fdt_next_tag()
39045 Enhanced the formerly private function _fdt_next_tag() to allow stepping
39046 through the tree, used to produce a human-readable dump, and made
39047 it part of the published interface.
39048 Also added some comments.
39050 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
39051 Author: Gerald Van Baren <vanbaren@cideas.com>
39052 Date: Sat Mar 31 12:05:39 2007 -0400
39054 libfdt: Customizations for use by u-boot.
39056 Changes to David Gibson's original source to fit into u-boot's
39057 environment. No functionality changes.
39059 commit 35748177c64a4a83a00057e93bb33e40278a2a96
39060 Author: Gerald Van Baren <vanbaren@cideas.com>
39061 Date: Sat Mar 31 12:00:56 2007 -0400
39063 libfdt: Import libfdt source (2 of 2)
39065 This adds the applicable libfdt source files (unmodified) and a README
39066 to explain where the source came from.
39068 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
39069 Author: Gerald Van Baren <vanbaren@cideas.com>
39070 Date: Sat Mar 31 11:59:59 2007 -0400
39072 libfdt: Import libfdt source (1 of 2)
39074 This adds the applicable libfdt source files (unmodified) and a README
39075 to explain where the source came from.
39077 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
39078 Author: Stefan Roese <sr@denx.de>
39079 Date: Sat Mar 31 13:16:23 2007 +0200
39081 ppc4xx: Update Katmai bootstrap command
39083 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
39086 Signed-off-by: Stefan Roese <sr@denx.de>
39088 commit cabee756a6532986729477c3cc1ea16ef8517ad2
39089 Author: Stefan Roese <sr@denx.de>
39090 Date: Sat Mar 31 13:15:06 2007 +0200
39092 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
39094 Additional RAM information is now printed upon powerup, like
39095 DDR2 frequency and CAS latency.
39097 Signed-off-by: Stefan Roese <sr@denx.de>
39099 commit 60723803431ac75cad085690789e433d5ab9174e
39100 Author: Stefan Roese <sr@denx.de>
39101 Date: Sat Mar 31 08:48:36 2007 +0200
39103 ppc4xx: Change Yucca config file to support ECC
39105 With the updated 44x DDR2 driver the Yucca board now supports
39106 ECC generation and checking.
39108 Signed-off-by: Stefan Roese <sr@denx.de>
39110 commit 490e5730c674b20d708b783a2c5ffd7208f83873
39111 Author: Stefan Roese <sr@denx.de>
39112 Date: Sat Mar 31 08:47:34 2007 +0200
39114 ppc4xx: Fix "bootstrap" command for Katmai board
39116 The board specific "bootstrap" command is now fixed and can
39117 be used for the AMCC Katmai board to configure different
39118 CPU/PLB/OPB frequencies.
39120 Signed-off-by: Stefan Roese <sr@denx.de>
39122 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
39123 Author: Stefan Roese <sr@denx.de>
39124 Date: Sat Mar 31 08:46:08 2007 +0200
39126 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
39128 Fix a bug in the auto calibration routine. This driver now runs
39129 more reliable with the tested modules. It's also tested with
39130 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
39132 Signed-off-by: Stefan Roese <sr@denx.de>
39134 commit 342cd097be1e7affe82f42ab3da220959a699e64
39135 Author: Michal Simek <monstr@monstr.eu>
39136 Date: Fri Mar 30 22:52:09 2007 +0200
39138 [PATCH] Clean include dependence
39140 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
39141 Author: Michal Simek <monstr@monstr.eu>
39142 Date: Fri Mar 30 22:42:45 2007 +0200
39144 [CLEAN] Remove inefficient Suzaku code
39146 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
39147 Author: Stefan Roese <sr@denx.de>
39148 Date: Wed Mar 28 15:03:16 2007 +0200
39150 Merge some AMCC make targets to keep the top-level Makefile smaller
39152 Signed-off-by: Stefan Roese <sr@denx.de>
39154 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
39155 Author: Stefan Roese <sr@denx.de>
39156 Date: Wed Mar 28 14:52:12 2007 +0200
39158 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
39160 The "old" i2c commands (iprobe, imd...) are now compiled in again,
39161 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
39164 Signed-off-by: Stefan Roese <sr@denx.de>
39166 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
39167 Author: Michal Simek <monstr@monstr.eu>
39168 Date: Tue Mar 27 00:32:16 2007 +0200
39170 PATCH: Resolve GPL license problem
39172 commit ae00bb4b2944dc64a485ed72a19754b11af7c223
39173 Author: Rodolfo Giometti <giometti@enneenne.com>
39174 Date: Mon Mar 26 12:03:36 2007 +0200
39176 PXA: pxa27x USB OHCI support
39178 Signed-off-by: Rodolfo Giometti <giometti@linux.it>
39180 commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
39181 Author: Markus Klotzbuecher <mk@denx.de>
39182 Date: Mon Mar 26 11:21:05 2007 +0200
39184 USB: remove the S3C24X0_merge #define, which was introduced while
39185 merging OHCI drivers.
39187 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39189 commit 1798049522f594013aea29457d46794298c6ae15
39190 Author: Michal Simek <root@monstr.eu>
39191 Date: Mon Mar 26 01:39:07 2007 +0200
39193 Support for XUPV2P board
39195 BSP autoconfig support
39197 commit 0d974d5297349504a2ddfa09314be573b5df320a
39198 Author: Stefan Roese <sr@denx.de>
39199 Date: Sat Mar 24 15:57:09 2007 +0100
39201 [PATCH] Add 4xx GPIO functions
39203 This patch adds some 4xx GPIO functions. It also moves some of the
39204 common code and defines into a common 4xx GPIO header file.
39206 Signed-off-by: Stefan Roese <sr@denx.de>
39208 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
39209 Author: Stefan Roese <sr@denx.de>
39210 Date: Sat Mar 24 15:55:58 2007 +0100
39212 [PATCH] Small Sequoia cleanup
39214 Signed-off-by: Stefan Roese <sr@denx.de>
39216 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
39217 Author: Stefan Roese <sr@denx.de>
39218 Date: Sat Mar 24 15:45:34 2007 +0100
39220 [PATCH] Clean up 40EZ/Acadia support
39222 This patch cleans up all the open issue of the preliminary
39225 Signed-off-by: Stefan Roese <sr@denx.de>
39227 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
39228 Author: Jon Loeliger <jdl@freescale.com>
39229 Date: Tue Dec 12 11:02:20 2006 -0600
39231 Fix 8641HPCN problem with ld version 2.16
39233 (Dot outside sections problem).
39235 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
39237 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39239 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
39240 Author: Haiying Wang <haiying.wang@freescale.com>
39241 Date: Thu Dec 7 10:35:55 2006 -0600
39243 Set Rev 2.x 86xx PIC in mixed mode.
39245 Prevent false interrupt from hanging Linux as MSR[EE] is set
39246 to enable interrupts by changing the PIC out of the default
39247 pass through mode into mixed mode.
39249 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
39250 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39252 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
39253 Author: Jason Jin <jason.jin@freescale.com>
39254 Date: Thu Dec 7 10:32:35 2006 -0600
39256 Add flash cmd function to 8641HPCN ramboot
39258 Also fixes some commmand for 8641 HPCN ramboot case.
39260 Signed-off-by: Jason Jin <jason.jin@freescale.com>
39261 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39263 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
39264 Author: Ed Swarthout <ed.swarthout@freescale.com>
39265 Date: Thu Dec 7 10:34:14 2006 -0600
39267 Add support for 8641 Rev 2 silicon.
39269 Without this patch, I am unable to get to the prompt on rev 2 silicon.
39270 Only set ddrioovcr for rev1.
39272 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
39273 Signed-off-by: Jon Loeliger <jdl@freescale.com>
39275 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
39276 Author: Wolfgang Denk <wd@denx.de>
39277 Date: Thu Mar 22 00:13:12 2007 +0100
39279 Code cleanup / re-insert previous Copyright entries.
39281 Signed-off-by: Wolfgang Denk <wd@denx.de>
39283 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
39284 Author: Wolfgang Denk <wd@denx.de>
39285 Date: Wed Mar 21 23:26:15 2007 +0100
39287 Code cleanup. Update CHANGELOG
39289 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
39290 Author: Stefan Roese <sr@denx.de>
39291 Date: Wed Mar 21 14:54:29 2007 +0100
39293 ppc4xx: Fix file mode of include/configs/acadia.h
39295 Signed-off-by: Stefan Roese <sr@denx.de>
39297 commit d5f4614c9350d9333e575100fb250aab774d0258
39298 Author: Markus Klotzbuecher <mk@denx.de>
39299 Date: Wed Mar 21 14:41:46 2007 +0100
39301 SPC1920: fix small clock routing bug
39303 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
39305 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
39306 Author: Stefan Roese <sr@denx.de>
39307 Date: Wed Mar 21 13:39:57 2007 +0100
39309 [PATCH] Add AMCC Acadia (405EZ) eval board support
39311 This patch adds support for the new AMCC Acadia eval board.
39313 Please note that this Acadia/405EZ support is still in a beta stage.
39314 Still lot's of cleanup needed but we need a preliminary release now.
39316 Signed-off-by: Stefan Roese <sr@denx.de>
39318 commit e01bd218b00af73499331a1a701625a852cd286f
39319 Author: Stefan Roese <sr@denx.de>
39320 Date: Wed Mar 21 13:38:59 2007 +0100
39322 [PATCH] Add AMCC PPC405EZ support
39324 This patch adds support for the new AMCC 405EZ PPC. It is in
39325 preparation for the AMCC Acadia board support.
39327 Please note that this Acadia/405EZ support is still in a beta stage.
39328 Still lot's of cleanup needed but we need a preliminary release now.
39330 Signed-off-by: Stefan Roese <sr@denx.de>
39332 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
39333 Author: Heiko Schocher <hs@pollux.denx.de>
39334 Date: Wed Mar 21 08:45:17 2007 +0100
39336 [PATCH] TQM8272: dont change the bits given from the HRCW
39337 for the SIUMCR and BCR Register.
39338 Fix the calculation for the EEprom Size
39340 Signed-off-by: Heiko Schocher <hs@denx.de>
39342 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
39343 Author: Aubrey Li <aubrey.adi@gmail.com>
39344 Date: Tue Mar 20 18:16:24 2007 +0800
39346 [Blackfin][PATCH] Add BF561 EZKIT board support
39348 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
39349 Author: Aubrey Li <aubrey.adi@gmail.com>
39350 Date: Mon Mar 19 22:55:58 2007 +0800
39352 [Blackfin][PATCH] minor cleanup
39354 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
39355 Author: Wolfgang Denk <wd@denx.de>
39356 Date: Mon Mar 19 13:10:08 2007 +0100
39358 Remove obsoleted POST files.
39360 Signed-off-by: Wolfgang Denk <wd@denx.de>
39362 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
39363 Author: Aubrey Li <aubrey.adi@gmail.com>
39364 Date: Mon Mar 19 01:26:11 2007 +0800
39366 [PATCH] Add flash chip M29W320ET/B support
39368 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
39369 Author: Aubrey Li <aubrey.adi@gmail.com>
39370 Date: Mon Mar 19 01:24:52 2007 +0800
39372 [Blackfin][PATCH] Add BF537 stamp board support
39374 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
39375 Author: Stefan Roese <sr@denx.de>
39376 Date: Fri Mar 16 21:11:42 2007 +0100
39378 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
39380 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
39381 DDR memory are dynamically programmed matching the total size
39382 of the equipped memory (DIMM modules).
39384 Signed-off-by: Stefan Roese <sr@denx.de>
39386 commit 76d1466f918b881cda2d259254761e73885093c2
39387 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39388 Date: Tue Mar 13 13:38:05 2007 +0100
39390 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
39391 boards in terms of unification.
39393 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39395 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
39396 Author: Wolfgang Denk <wd@denx.de>
39397 Date: Tue Mar 13 16:05:55 2007 +0100
39399 Make SC3 board build with 'make O='; use 'addcons' consistently
39400 (SC3 and Jupiter used to use 'addcon' instead).
39402 Signed-off-by: Wolfgang Denk wd@denx.de
39404 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
39405 Author: Heiko Schocher <hs@pollux.denx.de>
39406 Date: Tue Mar 13 09:40:59 2007 +0100
39408 [PATCH] update board config for jupiter Board:
39410 CONFIG_CMDLINE_EDITING,
39411 CFG_ENV_ADDR_REDUND activated
39413 Signed-off-by: Heiko Schocher <hs@denx.de>
39415 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
39416 Author: Aubrey Li <aubrey.adi@gmail.com>
39417 Date: Mon Mar 12 12:11:55 2007 +0800
39419 [Blackfin][PATCH] minor cleanup
39421 commit bfa5754a58477ac917d21527cd0f079d87cf188e
39422 Author: Aubrey Li <aubrey.adi@gmail.com>
39423 Date: Mon Mar 12 01:42:06 2007 +0800
39425 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
39427 commit 8440bb14581a294375c34b91b42512f9753d1130
39428 Author: Aubrey Li <aubrey.adi@gmail.com>
39429 Date: Mon Mar 12 00:25:14 2007 +0800
39431 [Blackfin][PATCH] code cleanup
39433 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
39434 Author: Michal Simek <monstr@monstr.eu>
39435 Date: Sun Mar 11 13:48:24 2007 +0100
39437 [Microblaze][PATCH] part 2
39439 interrupt controller support
39443 board information support
39445 booting image support
39447 adding support for Xilinx ML401
39449 commit 76316a318de91f6184e7c22a10e02d275ade2441
39450 Author: Michal Simek <monstr@monstr.eu>
39451 Date: Sun Mar 11 13:42:58 2007 +0100
39453 [Microblaze][PATCH]
39455 interrupt controller support
39459 board information support
39461 booting image support
39463 adding support for Xilinx ML401
39465 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
39466 Author: Aubrey Li <aubrey.adi@gmail.com>
39467 Date: Sat Mar 10 23:49:29 2007 +0800
39469 [Blackfin][PATCH] code cleanup
39471 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
39472 Author: Aubrey.Li <aubrey.adi@gmail.com>
39473 Date: Fri Mar 9 13:40:56 2007 +0800
39475 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
39477 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
39478 Author: Aubrey.Li <aubrey.adi@gmail.com>
39479 Date: Fri Mar 9 13:38:44 2007 +0800
39481 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
39483 commit 992423ab43c2bcf6b704853bd00af77450915e20
39484 Author: Stefan Roese <sr@denx.de>
39485 Date: Thu Mar 8 23:00:08 2007 +0100
39487 ppc4xx: Fix file mode of sequoia.c
39489 Signed-off-by: Stefan Roese <sr@denx.de>
39491 commit eb92f613556800f7483666db09d9a237ad911d4a
39492 Author: Wolfgang Denk <wd@pollux.denx.de>
39493 Date: Thu Mar 8 22:52:51 2007 +0100
39497 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
39498 Author: John Otken john@softadvances.com <john@softadvances.com>
39499 Date: Thu Mar 8 09:39:48 2007 -0600
39501 ppc4xx: Clear Sequoia/Rainier security engine reset bits
39503 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
39505 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
39506 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39507 Date: Thu Mar 8 16:26:52 2007 +0100
39509 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
39511 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39513 commit d9fc703246840c4b268debf48c334ba55c597dc0
39514 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39515 Date: Thu Mar 8 16:25:47 2007 +0100
39517 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
39519 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39521 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
39522 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39523 Date: Thu Mar 8 16:23:11 2007 +0100
39525 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
39527 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39529 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
39530 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39531 Date: Thu Mar 8 16:20:32 2007 +0100
39533 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
39535 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39537 commit f9fc6a5852a6335840882fa2111925010eea1abe
39538 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39539 Date: Wed Mar 7 15:32:01 2007 +0100
39541 fixed ethernet phy configuration for plu405 board
39543 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
39545 commit 769104c9356594deb2092e204a39c05b33202d6c
39546 Author: Wolfgang Denk <wd@pollux.denx.de>
39547 Date: Thu Mar 8 21:49:27 2007 +0100
39551 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
39552 Author: Stefan Roese <sr@denx.de>
39553 Date: Thu Mar 8 10:13:16 2007 +0100
39555 [PATCH] Update AMCC Luan 440SP eval board support
39557 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
39558 inititializition. This includes DDR auto calibration and support
39559 for different DIMM modules, instead of the fixed setup used in
39560 the earlier version.
39562 This patch also enables the cache in FLASH for the startup
39563 phase of U-Boot (while running from FLASH). After relocating to
39564 SDRAM the cache is disabled again. This will speed up the boot
39565 process, especially the SDRAM setup, since there are some loops
39566 for memory testing (auto calibration).
39568 Signed-off-by: Stefan Roese <sr@denx.de>
39570 commit 2f5df47351910a2936c7741cf111855829200943
39571 Author: Stefan Roese <sr@denx.de>
39572 Date: Thu Mar 8 10:10:18 2007 +0100
39574 [PATCH] Update AMCC Yucca 440SPe eval board support
39576 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
39577 inititializition. This includes DDR auto calibration and support
39578 for different DIMM modules, instead of the fixed setup used in
39579 the earlier version.
39581 Signed-off-by: Stefan Roese <sr@denx.de>
39583 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
39584 Author: Stefan Roese <sr@denx.de>
39585 Date: Thu Mar 8 10:07:18 2007 +0100
39587 ppc4xx: Small AMCC Katmai 440SPe update
39589 Signed-off-by: Stefan Roese <sr@denx.de>
39591 commit df294497479b1dca6dd86318b2a912f72fede0df
39592 Author: Stefan Roese <sr@denx.de>
39593 Date: Thu Mar 8 10:06:09 2007 +0100
39595 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
39597 Signed-off-by: Stefan Roese <sr@denx.de>
39599 commit 83853178bd36bca6f0f8f1331476620c84a587fc
39600 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
39601 Date: Wed Mar 7 12:14:50 2007 -0600
39603 net - Support ping reply when processing net-loop
39605 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
39607 This permits the ping command to test the phy interface when the phy
39608 is put in loopback mode (typically by setting register 0 bit 14).
39610 It also allows the port to respond to an external ping when u-boot is
39611 processing some other net command (such as tftp). This is useful when
39612 tftp appears to hang.
39614 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
39615 Signed-off-by: Ben Warren <bwarren@qstreams.com>
39617 commit fa1aef15bcd47736687be1af544506e90fba545d
39618 Author: Stefan Roese <sr@denx.de>
39619 Date: Wed Mar 7 16:43:00 2007 +0100
39621 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
39623 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
39624 DDR memory are dynamically programmed matching the total size
39625 of the equipped memory (DIMM modules).
39627 Signed-off-by: Stefan Roese <sr@denx.de>
39629 commit e2ebe696818939e2b974628be9c921ea3fe9de13
39630 Author: Stefan Roese <sr@denx.de>
39631 Date: Wed Mar 7 16:39:36 2007 +0100
39633 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
39635 This patch fixes a problem that occurs when 2 DIMM's are
39636 used. This problem was first spotted and fixed by Gerald Jackson
39637 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
39638 problem in a little more clever way.
39640 This patch also adds the nice functionality to dynamically
39641 create the TLB entries for the SDRAM (tlb.c). So we should
39642 never run into such problems with wrong (too short) TLB
39643 initialization again on these platforms.
39645 As this feature is new to the "old" 44x SPD DDR driver, it
39646 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
39648 Signed-off-by: Stefan Roese <sr@denx.de>
39650 commit 39218433983417b9df087976a79e3f80dd5e83d6
39651 Author: Wolfgang Denk <wd@denx.de>
39652 Date: Wed Mar 7 16:33:44 2007 +0100
39654 UC101: fix compiler warnings
39656 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
39657 Author: Wolfgang Denk <wd@pollux.denx.de>
39658 Date: Wed Mar 7 16:19:46 2007 +0100
39660 HMI1001: fix build error, cleanup compiler warnings.
39662 commit ad5bb451ade552c44bef9119d907929ebc2c126f
39663 Author: Wolfgang Denk <wd@pollux.denx.de>
39664 Date: Tue Mar 6 18:08:43 2007 +0100
39666 Restructure POST directory to support of other CPUs, boards, etc.
39668 commit a5284efd125967675b2e9c6ef7b95832268ad360
39669 Author: Wolfgang Denk <wd@pollux.denx.de>
39670 Date: Tue Mar 6 18:01:47 2007 +0100
39672 Fix HOSTARCH handling.
39673 Patch by Mike Frysinger, Mar 05 2007
39675 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
39676 Author: Stefan Roese <sr@denx.de>
39677 Date: Tue Mar 6 07:47:04 2007 +0100
39679 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
39681 As provided by the AMCC applications team, this patch optimizes the
39682 DDR2 setup for 166MHz bus speed. The values provided are also save
39683 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
39684 setup has to be adjusted as done in this patch.
39686 For this the NAND booting version had to include the "speed.c" file
39687 from the cpu/ppc4xx directory. With this addition the NAND SPL image
39688 will just fit into the 4kbytes of program space. gcc version 4.x as
39689 provided with ELDK 4.x is needed to generate this optimized code.
39691 Signed-off-by: Stefan Roese <sr@denx.de>
39693 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
39694 Author: Wolfgang Denk <wd@pollux.denx.de>
39695 Date: Sun Mar 4 01:36:05 2007 +0100
39699 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
39700 Author: Kim Phillips <kim.phillips@freescale.com>
39701 Date: Wed Feb 28 00:02:04 2007 -0600
39703 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
39705 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
39707 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
39708 Author: Kumar Gala <galak@kernel.crashing.org>
39709 Date: Tue Feb 27 23:51:42 2007 -0600
39711 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
39713 The config value for:
39721 Were not being used when setting the appropriate register
39724 * CFG_SCCR_USBMPHCM
39729 To allow full config of the SCCR.
39731 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
39732 that were just bogus.
39734 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39736 commit d51b3cf371cd441030460ef19d36b2924c361b1a
39737 Author: Kim Phillips <kim.phillips@freescale.com>
39738 Date: Thu Feb 22 20:06:57 2007 -0600
39740 mpc83xx: update [local-]mac-address properties on UEC based devices
39742 8360 and 832x weren't updating their [local-]mac-address
39743 properties. This patch fixes that.
39745 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39747 commit 61f4f912acbe60776c5e00df1ec94094ce672957
39748 Author: Timur Tabi <timur@freescale.com>
39749 Date: Tue Feb 13 10:41:42 2007 -0600
39751 mpc83xx: write MAC address to mac-address and local-mac-address
39753 Some device trees have a mac-address property, some have local-mac-address,
39754 and some have both. To support all of these device trees, this patch
39755 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
39756 This function already updates local-mac-address.
39758 Signed-off-by: Timur Tabi <timur@freescale.com>
39760 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
39761 Author: Kim Phillips <kim.phillips@freescale.com>
39762 Date: Tue Feb 27 18:41:08 2007 -0600
39764 mpc83xx: add command line editing by default
39766 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
39767 Author: Kim Phillips <kim.phillips@freescale.com>
39768 Date: Wed Feb 14 19:50:53 2007 -0600
39770 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
39772 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
39773 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
39775 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
39777 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
39778 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
39780 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
39781 Author: Xie Xiaobo <r63061@freescale.com>
39782 Date: Wed Feb 14 18:27:17 2007 +0800
39784 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
39786 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
39787 it pass DDR/DDR2 compliance tests.
39789 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
39791 commit b110f40bd180c6b560276589beedf753e97c46ce
39792 Author: Xie Xiaobo <r63061@freescale.com>
39793 Date: Wed Feb 14 18:27:06 2007 +0800
39795 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
39797 MPC8360E rev2.0 have new spridr,and PVR value,
39798 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
39800 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
39802 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
39803 Author: Xie Xiaobo <r63061@freescale.com>
39804 Date: Wed Feb 14 18:26:44 2007 +0800
39806 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
39808 MPC8349E rev3.1 have new spridr,and PVR value,
39809 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
39811 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
39813 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
39814 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
39815 Date: Wed Jan 31 11:04:19 2007 +0100
39817 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
39819 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
39820 which is used to se if an slave will ACK after receiving its address.
39822 Correct i2c probing to use this method as the old method could upset
39823 a slave as it wrote a data byte to it.
39825 Add a small delay in i2c_init() to let the controller
39826 shutdown any ongoing I2C activity.
39828 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
39830 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
39831 Author: Timur Tabi <timur@freescale.com>
39832 Date: Wed Jan 31 15:54:29 2007 -0600
39834 mpc83xx: Add support for the MPC8349E-mITX-GP
39836 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
39837 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
39838 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
39840 Signed-off-by: Timur Tabi <timur@freescale.com>
39842 commit fab16807adad350f618024350c6950165c247c72
39843 Author: Timur Tabi <timur@freescale.com>
39844 Date: Wed Jan 31 15:54:20 2007 -0600
39846 mpc83xx: Delete sdram_init() for MPC8349E-mITX
39848 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
39849 never does anything. This patch deletes it.
39851 Signed-off-by: Timur Tabi <timur@freescale.com>
39853 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
39854 Author: Dave Liu <daveliu@freescale.com>
39855 Date: Fri Jan 19 10:43:26 2007 +0800
39857 mpc83xx: Fix the LAW1/3 bug
39859 The patch solves the alignment problem of the local bus access windows to
39860 render accessible the memory bank and PHY registers of UPC 1 (starting at
39861 0xf801 0000). What we actually did was to adjust the sizes of the bus
39862 access windows so that the base address alignment requirement would be met.
39864 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
39865 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
39866 Signed-off-by: Dave Liu <daveliu@freescale.com>
39868 commit 97c4b397dce236a7318b304667bf89e59d08b17c
39869 Author: Kim Phillips <kim.phillips@freescale.com>
39870 Date: Tue Jan 30 16:15:31 2007 -0600
39872 mpc83xx: don't hang if watchdog configured on 8360, 832x
39874 don't hang if watchdog configured on 8360, 832x
39876 The watchdog programming model is the same across all 83xx devices;
39877 make the code reflect that.
39879 commit b70047478570e371ce7223be342ce98afea0f7d6
39880 Author: Kim Phillips <kim.phillips@freescale.com>
39881 Date: Tue Jan 30 16:15:21 2007 -0600
39883 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
39885 protect memcpy to bad address if a local-mac-address is missing from dt
39887 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
39888 Author: Kim Phillips <kim.phillips@freescale.com>
39889 Date: Tue Jan 30 16:15:04 2007 -0600
39891 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
39893 make 8360 default environment fdt be 8360 (not 8349)
39895 commit a28899c910024a0226331df07207b1038c300c93
39896 Author: Emilian Medve <Emilian.Medve@freescale.com>
39897 Date: Tue Jan 30 16:14:50 2007 -0600
39899 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
39901 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
39902 be used for busy-waiting since it strips the 'volatile' property from
39903 the bd variable. gcc3 was working by pure luck.
39905 This is a follow on patch to "Fix the UEC driver bug of QE"
39907 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
39908 Author: Kumar Gala <galak@kernel.crashing.org>
39909 Date: Tue Jan 30 14:08:30 2007 -0600
39911 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
39913 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
39914 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
39915 CONFIG_MPC834X so they are more generic.
39917 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
39919 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
39920 Author: Kim Phillips <kim.phillips@freescale.com>
39921 Date: Thu Jan 25 13:40:55 2007 -0600
39923 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
39925 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
39926 Author: Kim Phillips <kim.phillips@freescale.com>
39927 Date: Wed Jan 24 17:18:37 2007 -0600
39929 mpc83xx: sort Makefile targets
39931 reordered targets alphabetically
39933 commit 91e25769771c1164ed63ffca0add49f934ae3343
39934 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
39935 Date: Tue Jan 16 11:38:14 2007 -0500
39937 mpc83xx: U-Boot support for Wind River SBC8349
39939 I've redone the SBC8349 support to match git-current, which
39940 incorporates all the MPC834x updates from Freescale since the 1.1.6
39941 release, including the DDR changes.
39943 I've kept all the SBC8349 files as parallel as possible to the
39944 MPC8349EMDS ones for ease of maintenance and to allow for easy
39945 inspection of what was changed to support this board. Hence the SBC8349
39946 U-Boot has FDT support and everything else that the MPC8349EMDS has.
39948 Fortunately the Freescale updates added support for boards using CS0,
39949 but I had to change spd_sdram.c to allow for board specific settings for
39950 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
39951 default if the board doesn't specify a value.)
39953 Hopefully this should be mergeable as-is and require no whitespace
39954 cleanups or similar, but if something doesn't measure up then let me
39955 know and I'll fix it.
39960 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
39961 Author: Sam Song <samsongshu@yahoo.com.cn>
39962 Date: Thu Dec 14 19:03:21 2006 +0800
39964 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
39966 A redundant semicolon existed in mpc8349itx.c
39969 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
39971 commit f35f358241c549be3f75cfe2eaa642914275b7ba
39972 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
39973 Date: Wed Dec 6 21:23:55 2006 -0500
39975 mpc83xx: Put the version (and magic) after the HRCW.
39977 Put the version (and magic) after the HRCW. This puts it in a fixed
39978 location in flash, not at the start of flash but as close as we can get.
39980 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
39982 commit 48aecd969171a6e99a55fae04933857787f9a5bd
39983 Author: Dave Liu <r63238@freescale.com>
39984 Date: Thu Dec 7 21:14:51 2006 +0800
39986 mpc83xx: Add the MPC832XEMDS board readme
39988 Add the MPC832XEMDS board readme
39990 Signed-off-by: Dave Liu <daveliu@freescale.com>
39992 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
39993 Author: Dave Liu <r63238@freescale.com>
39994 Date: Thu Dec 7 21:13:15 2006 +0800
39996 mpc83xx: Add support for the MPC832XEMDS board
39998 This patch supports DUART, ETH3/4 and PCI etc.
40000 Signed-off-by: Dave Liu <daveliu@freescale.com>
40002 commit e080313c32322e15ab5a18eb896a252858c57284
40003 Author: Dave Liu <r63238@freescale.com>
40004 Date: Thu Dec 7 21:11:58 2006 +0800
40006 mpc83xx: streamline the 83xx immr head file
40008 For better format and style, I streamlined the 83xx head files,
40009 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
40010 duplicated macro definition appear in the both files; 2) the structure
40011 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
40012 macro definition put inside the each structure. So, I cleaned up the
40013 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
40014 moved the macro definition to mpc83xx.h, Just like MPC8260.
40018 *streamline the 83xx immr head file
40020 Signed-off-by: Dave Liu <daveliu@freescale.com>
40022 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
40023 Author: Dave Liu <r63238@freescale.com>
40024 Date: Wed Dec 6 11:38:17 2006 +0800
40026 mpc83xx: Fix the UEC driver bug of QE
40028 The patch prevents the GCC tool chain from striping useful code for
40029 optimization. It will make UEC ethernet driver workable, Otherwise the
40030 UEC will fail in tx when you are using gcc4.x. but the driver can work
40031 when using gcc3.4.3.
40035 *Prevent the GCC from striping code for optimization, Otherwise the UEC
40036 will tx failed when you are using gcc4.x.
40038 Signed-off-by: Dave Liu <daveliu@freescale.com>
40040 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
40041 Author: Stefan Roese <sr@denx.de>
40042 Date: Thu Mar 1 21:11:36 2007 +0100
40044 [PATCH] Update AMCC Katmai 440SPe eval board support
40046 This patch updates the recently added Katmai board support. The biggest
40047 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
40050 Please note, that still some problems are left with some memory
40051 configurations. See the driver for more details.
40053 Signed-off-by: Stefan Roese <sr@denx.de>
40055 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
40056 Author: Stefan Roese <sr@denx.de>
40057 Date: Thu Mar 1 07:03:25 2007 +0100
40059 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
40061 Signed-off-by: Stefan Roese <sr@denx.de>
40063 commit ccbc7036648e465697ca298ba51e0e76dda352a0
40064 Author: Wolfgang Denk <wd@pollux.denx.de>
40065 Date: Wed Feb 28 01:28:53 2007 +0100
40067 SC3: fix typo in default environment
40069 commit e344568b1b46af85ec32d815586f91bc115d6223
40070 Author: Sergei Poselenov <sposelenov@emcraft.com>
40071 Date: Tue Feb 27 20:15:30 2007 +0300
40073 MCC200: Fixes for update procedure
40075 - fix logic error in image type handling
40076 - make sure file system images (cramfs etc.) get stored in flash
40077 with image header stripped so they can be mounted through MTD
40079 commit 743571145b37182757d4e688a77860b36ee77573
40080 Author: Wolfgang Denk <wd@pollux.denx.de>
40081 Date: Tue Feb 27 14:26:04 2007 +0100
40083 Minor code cleanup.
40085 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
40086 Author: Sergei Poselenov <sposelenov@emcraft.com>
40087 Date: Tue Feb 27 12:40:16 2007 +0300
40089 MCC200 update - add LCD Progress Indicator
40091 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
40092 Author: Stefan Roese <sr@denx.de>
40093 Date: Thu Feb 22 07:43:34 2007 +0100
40095 [PATCH] get_dev() now unconditionally uses manual relocation
40097 Since the relocation fix is not included yet and we're not sure how
40098 it will be added, this patch removes code that required relocation
40099 to be fixed for now.
40101 Signed-off-by: Stefan Roese <sr@denx.de>
40103 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
40104 Author: Stefan Roese <sr@denx.de>
40105 Date: Thu Feb 22 07:40:23 2007 +0100
40107 [PATCH] Change systemace driver to select 8 & 16bit mode
40109 As suggested by Grant Likely this patch enables the Xilinx SystemACE
40110 driver to select 8 or 16bit mode upon startup.
40112 Signed-off-by: Stefan Roese <sr@denx.de>
40114 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
40115 Author: Haiying Wang <Haiying.Wang@freescale.com>
40116 Date: Wed Feb 21 16:52:31 2007 +0100
40118 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
40120 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
40121 is fully finished. The sync() is defined in each CPU's io.h file. For
40122 those CPUs which do not need sync for now, a dummy sync() is defined in
40123 their io.h as well.
40125 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
40127 commit da04995c7dc6772013a9a0dc5c767f190c402478
40128 Author: Stefan Roese <sr@denx.de>
40129 Date: Wed Feb 21 13:44:34 2007 +0100
40131 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
40133 Signed-off-by: Stefan Roese <sr@denx.de>
40135 commit 751bb57107d78978ae08e697c3deba816f5be091
40136 Author: Stefan Roese <sr@denx.de>
40137 Date: Tue Feb 20 13:21:57 2007 +0100
40139 [PATCH] Fix relocation problem with "new" get_dev() function
40141 This patch enables the "new" get_dev() function for block devices
40142 introduced by Grant Likely to be used on systems that still suffer
40143 from the relocation problems (manual relocation neede because of
40144 problems with linker script).
40146 Hopefully we can resolve this relocation issue soon for all platform
40147 so we don't need this additional code anymore.
40149 Signed-off-by: Stefan Roese <sr@denx.de>
40151 commit d93e2212f962668b3dce091ff5edc33f2347fe37
40152 Author: Stefan Roese <sr@denx.de>
40153 Date: Tue Feb 20 13:17:42 2007 +0100
40155 [PATCH] Update SystemACE driver for 16bit access
40157 This patch removes some problems when the Xilinx SystemACE driver
40158 is used with 16bit access on an big endian platform (like the
40161 Signed-off-by: Stefan Roese <sr@denx.de>
40163 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
40164 Author: Stefan Roese <sr@denx.de>
40165 Date: Tue Feb 20 13:15:40 2007 +0100
40167 [PATCH] Clean up Katmai (440SPe) linker script
40169 Signed-off-by: Stefan Roese <sr@denx.de>
40171 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
40172 Author: Stefan Roese <sr@denx.de>
40173 Date: Tue Feb 20 10:57:08 2007 +0100
40175 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
40177 Signed-off-by: Stefan Roese <sr@denx.de>
40179 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
40180 Author: Stefan Roese <sr@denx.de>
40181 Date: Tue Feb 20 10:51:26 2007 +0100
40183 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
40185 This patch switches to the desired I2C bus when the date/dtt
40186 commands are called. This can be configured using the
40187 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
40189 Signed-off-by: Stefan Roese <sr@denx.de>
40191 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
40192 Author: Stefan Roese <sr@denx.de>
40193 Date: Tue Feb 20 10:43:34 2007 +0100
40195 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
40197 This patch adds support for the DDR2 controller used on the
40198 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
40199 board and works fine with the following DIMM modules:
40201 - Corsair CM2X512-5400C4 (512MByte per DIMM)
40202 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
40203 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
40205 This patch also adds the nice functionality to dynamically
40206 create the TLB entries for the SDRAM (tlb.c). So we should
40207 never run into such problems with wrong (too short) TLB
40208 initialization again on these platforms.
40210 Signed-off-by: Stefan Roese <sr@denx.de>
40212 commit 36d830c9830379045f5daa9f542ac1c990c70068
40213 Author: Stefan Roese <sr@denx.de>
40214 Date: Tue Feb 20 10:35:42 2007 +0100
40216 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
40218 Since the existing 4xx SPD SDRAM initialization routines for the
40219 405 SDRAM controller and the 440 DDR controller don't have much in
40220 common this patch splits both drivers into different files.
40222 This is in preparation for the 440 DDR2 controller support (440SP/e).
40224 Signed-off-by: Stefan Roese <sr@denx.de>
40226 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
40227 Author: Stefan Roese <sr@denx.de>
40228 Date: Tue Feb 20 10:27:08 2007 +0100
40230 [PATCH] PPC4xx: Add support for multiple I2C busses
40232 This patch adds support for multiple I2C busses on the PPC4xx
40233 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
40234 to make use of this feature.
40236 It also merges the 405 and 440 i2c header files into one common
40239 Also the 4xx i2c reset procedure is reworked since I experienced
40240 some problems with the first access on the 440SPe Katmai board.
40242 Signed-off-by: Stefan Roese <sr@denx.de>
40244 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
40245 Author: Grant Likely <grant.likely@secretlab.ca>
40246 Date: Tue Feb 20 09:05:45 2007 +0100
40248 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
40250 Block device read/write is anonymous data; there is no need to use a
40251 typed pointer. void * is fine. Also add a hook for block_read functions
40253 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40255 commit 53758fa20e935cc87eeb0519ed365df753a6f289
40256 Author: Grant Likely <grant.likely@secretlab.ca>
40257 Date: Tue Feb 20 09:05:38 2007 +0100
40259 [PATCH 8_9] Add block_write hook to block_dev_desc_t
40261 Preparation for future patches which support block device writing
40263 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40265 commit f4852ebe6ca946a509667eb68be42026f837be76
40266 Author: Grant Likely <grant.likely@secretlab.ca>
40267 Date: Tue Feb 20 09:05:31 2007 +0100
40269 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
40271 Register read/write does not need to be wrapped in a full function. The
40272 patch replaces them with macros.
40274 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40276 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
40277 Author: Grant Likely <grant.likely@secretlab.ca>
40278 Date: Tue Feb 20 09:05:23 2007 +0100
40280 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
40282 The code in this file is not a command; it is a device driver. Put it in
40283 the correct place. There are zero functional changes in this patch, it
40284 only moves the file.
40286 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40288 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
40289 Author: Grant Likely <grant.likely@secretlab.ca>
40290 Date: Tue Feb 20 09:05:16 2007 +0100
40292 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
40294 This patch is in preparation of additional changes to the sysace driver.
40295 May as well take this opportunity to fixup the inconsistent whitespace since
40296 this file is about to undergo major changes anyway.
40298 There are zero functional changes in this patch. It only cleans up the
40301 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40303 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
40304 Author: Grant Likely <grant.likely@secretlab.ca>
40305 Date: Tue Feb 20 09:05:07 2007 +0100
40307 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
40309 isprint is already defined in ctype.c
40311 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40313 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
40314 Author: Grant Likely <grant.likely@secretlab.ca>
40315 Date: Tue Feb 20 09:05:00 2007 +0100
40317 [PATCH 3_9] Move buffer print code from md command to common function
40319 Printing a buffer is a darn useful thing. Move the buffer print code
40320 into print_buffer() in lib_generic/
40322 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40324 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
40325 Author: Grant Likely <grant.likely@secretlab.ca>
40326 Date: Tue Feb 20 09:04:52 2007 +0100
40328 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
40330 Change the xilinx device drivers and board code to include config.h
40331 instead of xparameters.h directly. config.h always includes the
40332 correct xparameters file. This change reduces the posibility of
40333 including the wrong file when adding a new xilinx board port
40335 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40337 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
40338 Author: Grant Likely <grant.likely@secretlab.ca>
40339 Date: Tue Feb 20 09:04:34 2007 +0100
40341 [PATCH 1_4] Merge common get_dev() routines for block devices
40343 Each of the filesystem drivers duplicate the get_dev routine. This change
40344 merges them into a single function in part.c
40346 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
40348 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
40349 Author: Wolfgang Denk <wd@pollux.denx.de>
40350 Date: Mon Feb 19 23:09:51 2007 +0100
40352 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
40353 as root file system images.
40355 commit 489c696ae7211218961d159e43e722d74c36fcbc
40356 Author: Sergei Poselenov <sposelenov@emcraft.com>
40357 Date: Wed Feb 14 14:30:28 2007 +0300
40359 MCC200: Extensions to Software Update Mechanism
40361 Update / extend Software Update Mechanism for MCC200 board:
40363 - Add support for rootfs image added. The environment variables
40364 "rootfs_st" and "rootfs_nd" can be used to override the default
40365 values of the image start and end.
40366 - Remove excessive key check code.
40369 commit 4be23a12f23f1372634edc3215137b09768b7949
40370 Author: Stefan Roese <sr@denx.de>
40371 Date: Mon Feb 19 08:23:15 2007 +0100
40373 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
40375 As spotted by Matthias Fuchs, the READY input should not be
40376 enabled for the NOR FLASH on the Sequoia board.
40378 Signed-off-by: Stefan Roese <sr@denx.de>
40380 commit 2605e90bf676d48123afe5719a846d2b52b24aac
40381 Author: Heiko Schocher <hs@pollux.denx.de>
40382 Date: Fri Feb 16 07:57:42 2007 +0100
40384 [PATCH] Added support for the jupiter board.
40386 Signed-off-by: Heiko Schocher <hs@denx.de>
40388 commit 497d012e5be0194e1084073d0081eb1a844796b2
40389 Author: Gary Jennejohn <garyj@pollux.denx.de>
40390 Date: Mon Feb 12 13:11:50 2007 +0100
40392 LPC2292: patch from Siemens.
40394 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
40395 Author: Stefan Roese <sr@denx.de>
40396 Date: Sat Feb 10 08:49:31 2007 +0100
40398 [PATCH] Add missing p3mx.h file to repository (ups)
40400 Signed-off-by: Stefan Roese <sr@denx.de>
40402 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
40403 Author: Bartlomiej Sieka <tur@semihalf.com>
40404 Date: Fri Feb 9 10:45:42 2007 +0100
40406 [Motion-PRO] Preliminary support for the Motion-PRO board.
40408 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
40409 Author: Stefan Roese <sr@denx.de>
40410 Date: Wed Feb 7 16:51:08 2007 +0100
40412 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
40414 Some boards that can have more than 768MBytes of SDRAM need to
40415 set "initrd_high", so that the initrd can be accessed by the
40418 Signed-off-by: Stefan Roese <sr@denx.de>
40420 commit 7372ca68227930d03cffa548310524cad5b96733
40421 Author: Stefan Roese <sr@denx.de>
40422 Date: Fri Feb 2 12:44:22 2007 +0100
40424 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
40426 Previously the strapping DCR/SDR was read to determine if the internal PCI
40427 arbiter is enabled or not. This strapping bit can be overridden, so now
40428 the current status is read from the correct DCR/SDR register.
40430 Signed-off-by: Stefan Roese <sr@denx.de>
40432 commit 2aa54f651a42d198673318f07a20c89a43e4d197
40433 Author: Stefan Roese <sr@denx.de>
40434 Date: Fri Feb 2 12:42:08 2007 +0100
40436 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
40438 Signed-off-by: Stefan Roese <sr@denx.de>
40440 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
40441 Author: Stefan Roese <sr@denx.de>
40442 Date: Thu Feb 1 13:22:41 2007 +0100
40444 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
40446 When PCI PNP is enabled the pci pnp configuration routine is called
40447 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
40448 problems with some PCI cards. For now disable the PCI PNP configuration.
40450 Signed-off-by: Stefan Roese <sr@denx.de>
40452 commit 2902fadade3be7659467e8d074048c6b7068f5c0
40453 Author: Stefan Roese <sr@denx.de>
40454 Date: Wed Jan 31 16:56:10 2007 +0100
40456 [PATCH] Update 440EPx/440GRx cpu detection
40458 Signed-off-by: Stefan Roese <sr@denx.de>
40460 commit d5ea287b02a6945c3977410e364a879dd1a555c8
40461 Author: Stefan Roese <sr@denx.de>
40462 Date: Wed Jan 31 16:38:04 2007 +0100
40464 [PATCH] Update esd cpci5200 files
40466 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
40468 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
40469 Author: Stefan Roese <sr@denx.de>
40470 Date: Wed Jan 31 16:37:34 2007 +0100
40472 [PATCH] Add support for esd mecp5200 board
40474 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
40476 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
40477 Author: Stefan Roese <sr@denx.de>
40478 Date: Wed Jan 31 12:38:50 2007 +0100
40480 [PATCH] Remove unneccessary yellowstone board config file
40482 Signed-off-by: Stefan Roese <sr@denx.de>
40484 commit e802594b6fa1b166308820c276b96dc0d7cc731c
40485 Author: Stefan Roese <sr@denx.de>
40486 Date: Tue Jan 30 17:06:10 2007 +0100
40488 [PATCH] Update Sequoia (440EPx) config file
40490 The config file now handles the 2nd target, the Rainier (440GRx)
40491 evaluation board better. Additionally the PPC input clock was
40492 adjusted to match the correct value of 33.0 MHz.
40494 Signed-off-by: Stefan Roese <sr@denx.de>
40496 commit 700200c67e73b83751418abe7815840dca8fd6cb
40497 Author: Stefan Roese <sr@denx.de>
40498 Date: Tue Jan 30 17:04:19 2007 +0100
40500 [PATCH] Merge Yosemite & Yellowstone board ports
40502 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
40503 share one config file and all board specific files. This way we
40504 don't have to maintain two different sets of files for nearly
40507 Signed-off-by: Stefan Roese <sr@denx.de>
40509 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
40510 Author: Stefan Roese <sr@denx.de>
40511 Date: Tue Jan 30 15:01:49 2007 +0100
40513 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
40515 SCPU doesn't use redundant environment in flash.
40517 Signed-off-by: Stefan Roese <sr@denx.de>
40519 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
40520 Author: Stefan Roese <sr@denx.de>
40521 Date: Tue Jan 30 12:51:07 2007 +0100
40523 [PATCH] alpr: Update alpr board config file
40525 Signed-off-by: Stefan Roese <sr@denx.de>
40527 commit f8db84f132b1e335f20f96138a1f09ed97b08664
40528 Author: Wolfgang Denk <wd@pollux.denx.de>
40529 Date: Tue Jan 30 00:50:40 2007 +0100
40531 LPC2292 SODIMM port coding style cleanup.
40533 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
40534 Author: Gary Jennejohn <garyj@pollux.denx.de>
40535 Date: Wed Jan 24 12:16:56 2007 +0100
40537 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
40539 commit 2daf046ba627f85f44195815778140039636244e
40540 Author: Bartlomiej Sieka <tur@semihalf.com>
40541 Date: Tue Jan 23 17:22:06 2007 +0100
40543 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
40545 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
40546 Author: Bartlomiej Sieka <tur@semihalf.com>
40547 Date: Tue Jan 23 14:21:14 2007 +0100
40549 [iDMR] Flash driver on initialisation write-protects some sectors,
40550 currently sectors 0-3. Sector 3 does not need to be protected, though
40551 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
40552 fixes this, i.e., only sectors 0-2 are protected.
40554 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
40555 Author: Bartlomiej Sieka <tur@semihalf.com>
40556 Date: Tue Jan 23 14:11:22 2007 +0100
40558 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
40559 "mii device" results in "Unexpected exception"). Fixing this properly
40560 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
40561 this commit disables MII commads for now.
40563 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
40564 Author: Bartlomiej Sieka <tur@semihalf.com>
40565 Date: Tue Jan 23 13:25:22 2007 +0100
40567 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
40568 Identification Register (CIR).
40570 commit fdef388758506765d4d6a7155c8f1584c63ff581
40571 Author: roy zang <tie-fei.zang@freescale.com>
40572 Date: Mon Jan 22 13:19:21 2007 +0800
40574 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
40575 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
40576 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
40579 commit a4012396645533aef218354eeba754dff0deace8
40580 Author: Wolfgang Denk <wd@pollux.denx.de>
40581 Date: Fri Jan 19 23:08:39 2007 +0100
40583 Minor code cleanup.
40585 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
40586 Author: Heiko Schocher <hs@pollux.denx.de>
40587 Date: Fri Jan 19 19:57:10 2007 +0100
40589 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
40591 Signed-off-by: Heiko Schocher <hs@denx.de>
40593 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
40594 Author: Heiko Schocher <hs@pollux.denx.de>
40595 Date: Fri Jan 19 18:05:26 2007 +0100
40597 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
40598 if you must swap the bytes between reading/writing.
40599 (Needed for the SC3 board)
40601 Signed-off-by: Heiko Schocher <hs@denx.de>
40603 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
40604 Author: Stefan Roese <sr@denx.de>
40605 Date: Thu Jan 18 16:05:47 2007 +0100
40607 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
40609 Signed-off-by: Stefan Roese <sr@denx.de>
40611 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
40612 Author: Stefan Roese <sr@denx.de>
40613 Date: Thu Jan 18 11:54:52 2007 +0100
40615 [PATCH] Update Prodrive P3Mx support
40617 Signed-off-by: Stefan Roese <sr@denx.de>
40619 commit 34167a36c29ee946b727465db5c014746a08e978
40620 Author: Stefan Roese <sr@denx.de>
40621 Date: Thu Jan 18 11:48:10 2007 +0100
40623 [PATCH] Add missing Taishan config file
40625 Signed-off-by: Stefan Roese <sr@denx.de>
40627 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
40628 Author: Heiko Schocher <hs@pollux.denx.de>
40629 Date: Thu Jan 18 11:28:51 2007 +0100
40631 [PATCH] Fix: Compilerwarnings for SC3 board.
40632 The EBC Configuration Register is now by CFG_EBC_CFG definable
40633 Added JFFS2 support for the SC3 board.
40635 Signed-off-by: Heiko Schocher <hs@denx.de>
40637 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
40638 Author: Stefan Roese <sr@denx.de>
40639 Date: Thu Jan 18 10:25:34 2007 +0100
40641 [PATCH] Add support for AMCC Taishan PPC440GX eval board
40643 Signed-off-by: Stefan Roese <sr@denx.de>
40645 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
40646 Author: Wolfgang Denk <wd@pollux.denx.de>
40647 Date: Tue Jan 16 18:30:50 2007 +0100
40649 Raname solidcard3 into sc3; add redundant env for sc3
40651 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
40652 Author: Wolfgang Denk <wd@pollux.denx.de>
40653 Date: Tue Jan 16 12:46:35 2007 +0100
40655 Update default environment for Solidcard3
40657 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
40658 Author: Stefan Roese <sr@denx.de>
40659 Date: Mon Jan 15 09:46:29 2007 +0100
40661 [PATCH] Fix 440SPe rev B detection from previous patch
40663 Signed-off-by: Stefan Roese <sr@denx.de>
40665 commit a443d31410c571ee8f970da819a44d698fdd6b1f
40666 Author: Heiko Schocher <hs@pollux.denx.de>
40667 Date: Sun Jan 14 13:35:31 2007 +0100
40669 [FIX] correct I2C Writes for the LM81 Sensor.
40671 Signed-off-by: Heiko Schocher <hs@denx.de>
40673 commit 0bba5452835f19a61204edcda3a58112fd8e2208
40674 Author: Wolfgang Denk <wd@pollux.denx.de>
40675 Date: Sat Jan 13 11:17:10 2007 +0100
40677 Undo commit 3033ebb2: reset command does not take any arguments
40679 Haiying Wang's modification to the reset command was broken, undo it.
40681 Signed-off-by: Wolfgang Denk <wd@denx.de>
40683 commit 95981778cff0038fd9941044d6a3eda810e33258
40684 Author: Stefan Roese <sr@denx.de>
40685 Date: Sat Jan 13 08:01:03 2007 +0100
40687 [PATCH] Update 440SP(e) cpu revisions
40689 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
40691 Signed-off-by: Stefan Roese <sr@denx.de>
40693 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
40694 Author: Stefan Roese <sr@denx.de>
40695 Date: Sat Jan 13 07:59:56 2007 +0100
40697 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
40699 Now the board revision and the current PCI bus speed are printed after
40702 Also the EBC initialising is now done via defines in the board config
40705 Signed-off-by: Stefan Roese <sr@denx.de>
40707 commit 36adff362c2c0141ff8a810d42a7e478f779130f
40708 Author: Stefan Roese <sr@denx.de>
40709 Date: Sat Jan 13 07:59:19 2007 +0100
40711 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
40713 Now the board revision and the current PCI bus speed are printed after
40716 Also the EBC initialising is now done via defines in the board config
40719 Signed-off-by: Stefan Roese <sr@denx.de>
40721 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
40722 Author: Stefan Roese <sr@denx.de>
40723 Date: Sat Jan 13 07:57:51 2007 +0100
40725 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
40727 Now the board revision and the current PCI bus speed are printed after
40730 Signed-off-by: Stefan Roese <sr@denx.de>
40732 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
40733 Author: Heiko Schocher <hs@pollux.denx.de>
40734 Date: Thu Jan 11 15:44:44 2007 +0100
40736 Added support for the SOLIDCARD III board from Eurodesign
40738 Signed-off-by: Heiko Schocher <hs@denx.de>
40740 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
40741 Author: Reinhard Thies <Reinhard.Thies@web.de>
40742 Date: Wed Jan 10 14:41:14 2007 +0100
40744 Adjusted default environment for cam5200 board.
40746 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
40747 Author: Wolfgang Denk <wd@pollux.denx.de>
40748 Date: Wed Jan 10 15:35:52 2007 +0100
40752 commit 787fa15860a57833e50bd30555079a9cd4e519b8
40753 Author: Wolfgang Denk <wd@pollux.denx.de>
40754 Date: Wed Jan 10 01:28:39 2007 +0100
40756 Fix auto_update for MCC200 board.
40758 The invocation of do_auto_update() is moved to the end of the
40759 misc_init_r() function, after the flash mappings have been
40760 initialized. Please find attached a patch that implements that
40763 Also correct the decoding of the keypad status. With this update, the
40764 key that will trigger the update is Column 2, Row 2.
40766 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
40767 Author: Marian Balakowicz <m8@semihalf.com>
40768 Date: Wed Jan 10 00:26:15 2007 +0100
40770 CAM5200 flash driver modifications:
40771 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
40772 - add second build target 'cam5200_niosflash' which still uses custom driver
40774 commit 67fea022fa957f59653b5238c7496f80a6b70432
40775 Author: Markus Klotzbuecher <mk@denx.de>
40776 Date: Tue Jan 9 16:02:48 2007 +0100
40778 SPC1920: cleanup memory contoller setup
40780 commit 8fc2102faa23593c80381437c09f7745a14deb40
40781 Author: Markus Klotzbuecher <mk@denx.de>
40782 Date: Tue Jan 9 14:57:14 2007 +0100
40784 Fix the cpu speed setup to work with all boards.
40786 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
40787 Author: Markus Klotzbuecher <mk@denx.de>
40788 Date: Tue Jan 9 14:57:13 2007 +0100
40790 SPC1920: add support for the FM18L08 Ramtron FRAM
40792 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
40793 Author: Markus Klotzbuecher <mk@denx.de>
40794 Date: Tue Jan 9 14:57:13 2007 +0100
40796 SPC1920: update the HPI register addresses to work with the second
40797 generation of hardware
40799 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
40800 Author: Markus Klotzbuecher <mk@creamnet.de>
40801 Date: Tue Jan 9 14:57:13 2007 +0100
40803 Miscellanious spc1920 related cleanups
40805 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
40806 Author: Markus Klotzbuecher <mk@denx.de>
40807 Date: Tue Jan 9 14:57:12 2007 +0100
40809 SPC1920 GO/NOGO led should be set to color red in U-Boot
40811 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
40812 Author: Markus Klotzbuecher <mk@creamnet.de>
40813 Date: Tue Jan 9 14:57:12 2007 +0100
40815 Add support for the DS3231 RTC
40817 commit 8139567b60d678584b05f0718a681f2047c5e14f
40818 Author: Markus Klotzbuecher <mk@creamnet.de>
40819 Date: Tue Jan 9 14:57:11 2007 +0100
40821 SMC1 uses external CLK4 instead of BRG on spc1920
40823 commit d8d9de1a02fbd880b613d607143d1f57342affc7
40824 Author: Markus Klotzbuecher <mk@creamnet.de>
40825 Date: Tue Jan 9 14:57:10 2007 +0100
40827 Update the SPC1920 CMB PLD driver
40829 commit 3f34f869162750e5e999fd140f884f5de952bcfe
40830 Author: Markus Klotzbuecher <mk@creamnet.de>
40831 Date: Tue Jan 9 14:57:10 2007 +0100
40833 Add / enable I2C support on the spc1920 board
40835 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
40836 Author: Markus Klotzbuecher <mk@creamnet.de>
40837 Date: Tue Jan 9 14:57:10 2007 +0100
40839 Add support for the tms320671x host port interface (HPI)
40841 commit f4eb54529bb3664c3a562e488b460fe075f79d67
40842 Author: Wolfgang Denk <wd@pollux.denx.de>
40843 Date: Sun Jan 7 00:13:11 2007 +0100
40845 Prepare for release 1.2.0
40847 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
40848 Author: Stefan Roese <sr@denx.de>
40849 Date: Sat Jan 6 15:58:09 2007 +0100
40851 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
40853 This patch fixes a problem with an incorrect setup for the refresh
40854 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
40856 Signed-off-by: Stefan Roese <sr@denx.de>
40858 commit f16c1da9577f06c5fc08651a4065537407de4635
40859 Author: Stefan Roese <sr@denx.de>
40860 Date: Sat Jan 6 15:56:13 2007 +0100
40862 [PATCH] Update ALPR board files
40864 This update brings the ALPR board support to the newest version.
40865 It also fixes a problem with the NAND driver.
40867 Signed-off-by: Stefan Roese <sr@denx.de>
40869 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
40870 Author: Stefan Roese <sr@denx.de>
40871 Date: Fri Jan 5 11:46:05 2007 +0100
40873 [PATCH] nand: Fix problem with oobsize calculation
40875 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
40877 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
40878 returns a 0x15. In the code fragment below bits [1:0] determine the
40879 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
40880 next field is also ANDed with 0x3. However this is a one bit field
40881 as defined in the Hynix and Samsung parts in the 4th ID byte that
40882 determins the oobsize, not a two bit field. It works on Samsung as
40883 bits[3:2] are 01. However for the Hynix there is a 11 in these two
40884 bits, so the oob size gets messed up.
40886 I checked the correct linux code and the suggested fix from Brian is
40887 also available in the linux nand mtd driver.
40889 Signed-off-by: Stefan Roese <sr@denx.de>
40891 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
40892 Author: Stefan Roese <sr@denx.de>
40893 Date: Fri Jan 5 10:40:36 2007 +0100
40895 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
40897 This fix will make the MAL burst disabling patch for the Linux
40898 EMAC driver obsolete.
40900 Signed-off-by: Stefan Roese <sr@denx.de>
40902 commit 023889838282b6237b401664f22dd22dfba2c066
40903 Author: Stefan Roese <sr@denx.de>
40904 Date: Fri Jan 5 10:38:05 2007 +0100
40906 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
40908 This code will optimize the DDR2 controller setup on a board specific
40911 Note: This code doesn't work right now on the NAND booting image for the
40912 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
40914 Signed-off-by: Stefan Roese <sr@denx.de>
40916 commit cce4acbb68398634b8d011ed7bb0d12269c84230
40917 Author: Bartlomiej Sieka <tur@semihalf.com>
40918 Date: Thu Dec 28 19:08:21 2006 +0100
40921 - fix a typo in V38B config file
40922 - move watchdog initialisation earlier in the boot process
40923 - add "wdt=off" to default kernel command line (disables kernel watchdog)
40925 commit 92eb729bad876725aeea908d2addba0800620840
40926 Author: Wolfgang Denk <wd@pollux.denx.de>
40927 Date: Wed Dec 27 01:26:13 2006 +0100
40929 Fix bug in adaption of Stefano Babic's CFI driver patch.
40931 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
40932 Author: Wolfgang Denk <wd@pollux.denx.de>
40933 Date: Sun Dec 24 01:42:57 2006 +0100
40935 Minor code cleanup.
40937 commit d784fdb05900ada3686d5778783e1fb328e9fb66
40938 Author: Stefano Babic <sbabic@denx.de>
40939 Date: Tue Dec 12 00:22:42 2006 +0100
40941 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
40943 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
40944 Author: Stefan Roese <sr@denx.de>
40945 Date: Fri Dec 22 14:29:40 2006 +0100
40947 [PATCH] Fix sequoia flash autodetection (finally correct)
40949 Now 32MByte and 64MByte FLASH is know to work and other
40950 configurations should work too.
40952 Signed-off-by: Stefan Roese <sr@denx.de>
40954 commit 82e5236a8b719543643fd26d5827938ab2b94818
40955 Author: Wolfgang Denk <wd@pollux.denx.de>
40956 Date: Fri Dec 22 10:30:26 2006 +0100
40958 Minor code cleanup; update CHANGELOG.
40960 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
40961 Author: Heiko Schocher <hs@pollux.denx.de>
40962 Date: Thu Dec 21 17:17:02 2006 +0100
40964 Added support for the TQM8272 board from TQ
40966 Signed-off-by: Heiko Schocher <hs@denx.de>
40968 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
40969 Author: Heiko Schocher <hs@pollux.denx.de>
40970 Date: Thu Dec 21 16:14:48 2006 +0100
40972 [PATCH] Add support for the UC101 board from MAN.
40974 Signed-off-by: Heiko Schocher <hs@denx.de>
40976 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
40977 Author: Bartlomiej Sieka <tur@semihalf.com>
40978 Date: Wed Dec 20 00:29:43 2006 +0100
40980 Fix to make the baudrate changes immediate for the MCF52x2 family.
40982 commit daa6e418bcc0c717752e8de939c213c790286096
40983 Author: Bartlomiej Sieka <tur@semihalf.com>
40984 Date: Wed Dec 20 00:27:32 2006 +0100
40986 Preliminary support for the iDMR board (ColdFire).
40988 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
40989 Author: Andrei Safronov <safronov@pollux.denx.de>
40990 Date: Fri Dec 8 16:23:08 2006 +0100
40992 automatic update mechanism
40994 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
40995 Author: roy zang <tie-fei.zang@freescale.com>
40996 Date: Mon Dec 4 17:56:59 2006 +0800
40998 Slight code clean up.
40999 Add comments, delete duplicate define and remove spaces.
41000 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41002 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
41003 Author: roy zang <tie-fei.zang@freescale.com>
41004 Date: Mon Dec 4 17:54:21 2006 +0800
41006 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
41007 multiplier table can not refect the real PLL clock behavior of these
41008 processors. Please refer to the hardware specification for detailed
41009 information of the corresponding processors.
41010 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41012 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
41013 Author: roy zang <tie-fei.zang@freescale.com>
41014 Date: Mon Dec 4 14:46:23 2006 +0800
41016 Remove the static MAC address, ip address, server ip, netmask and
41017 gateway ip for network setting.
41018 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41020 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
41021 Author: roy zang <tie-fei.zang@freescale.com>
41022 Date: Mon Dec 4 14:33:08 2006 +0800
41024 Remove the duplicate memory test code for mpc744ihpc2 board.
41025 If a memory test is needed, please use the functions in
41026 post/memory.c or memtest command.
41027 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41029 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
41030 Author: roy zang <tie-fei.zang@freescale.com>
41031 Date: Fri Dec 1 19:01:25 2006 +0800
41033 Fix the exception occuring in RAM table search issue.
41034 The original search_one_table() function code can only processes the search
41035 for the exception occurring in FLASH/ROM, because the exception and fixup
41036 table usually locate in FLASH. If the exception address is also in
41037 FLASH, it will be OK.
41038 If the exception occurs in RAM, after the u-boot relocation, a
41039 relocation offset should be added.
41041 clean up the code in cpu/74xx_7xx/cpu.c
41043 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41045 commit ee311214e0d216f904feea269599d0934bf71f23
41046 Author: roy zang <tie-fei.zang@freescale.com>
41047 Date: Fri Dec 1 11:47:36 2006 +0800
41049 Clean up the code according to codestyle:
41050 (1) remove some C++ comments.
41051 (2) remove trailing white space.
41052 (3) remove trailing empty line.
41053 (4) Indentation by table.
41054 (5) remove {} in one line condition.
41055 (6) add space before '(' in function call.
41056 Remove some weird printf () output.
41057 Add necessary comments.
41058 Modified Makefile to support building in a separate directory.
41060 commit dd520bf314c7add4183c5191692180f576f96b60
41061 Author: Wolfgang Denk <wd@pollux.denx.de>
41062 Date: Thu Nov 30 18:02:20 2006 +0100
41066 commit 8d9a8610b8256331132227e9e6585c6bd5742787
41067 Author: Wolfgang Denk <wd@pollux.denx.de>
41068 Date: Thu Nov 30 01:54:07 2006 +0100
41070 Code cleanup. Update CHANGELOG.
41072 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
41073 Author: Grant Likely <grant.likely@secretlab.ca>
41074 Date: Wed Nov 29 16:23:42 2006 +0100
41076 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
41078 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
41079 not the XLB frequency.
41081 This patch depends on the previous patches for MPC52xx device tree support
41083 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41084 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
41086 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
41087 Author: Stefan Roese <sr@denx.de>
41088 Date: Wed Nov 29 15:42:37 2006 +0100
41090 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
41092 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
41093 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
41094 quite similar and share the same board directory "prodrive/p3mx"
41095 and the same config file "p3mx.h".
41097 Signed-off-by: Stefan Roese <sr@denx.de>
41099 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
41100 Author: Stefan Roese <sr@denx.de>
41101 Date: Wed Nov 29 12:53:15 2006 +0100
41103 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
41105 In the bootvx command the load address was only read from the env
41106 variable "loadaddr" and not optionally passed as paramter as described
41107 in the help. This is fixed with this patch. The behaviour is now the
41108 same as in the bootelf command.
41110 Signed-off-by: Stefan Roese <sr@denx.de>
41112 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
41113 Author: Stefan Roese <sr@denx.de>
41114 Date: Wed Nov 29 12:03:57 2006 +0100
41116 [PATCH] include/ppc440.h minor error affecting interrupts
41118 Fixed include/ppc440.c for UIC address Bug
41120 Corrects bug affecting the addresses for the universal interrupt
41121 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
41123 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
41124 Signed-off-by: Stefan Roese <sr@denx.de>
41126 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
41127 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41128 Date: Tue Nov 28 16:17:27 2006 -0600
41130 Make fsl-i2c not conflict with SOFT I2C
41132 Signed-off-by: Timur Tabi <timur@freescale.com>
41134 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
41135 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
41136 Date: Tue Nov 28 16:17:18 2006 -0600
41138 Fix I2C master address initialization.
41140 Signed-off-by: Timur Tabi <timur@freescale.com>
41142 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
41143 Author: Kim Phillips <kim.phillips@freescale.com>
41144 Date: Tue Nov 28 23:31:19 2006 -0600
41146 Assign maintainers for mpc8349emds and mpc8360emds
41148 Dave for mpc8360emds, and me for mpc8349emds.
41150 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
41151 Author: Kim Phillips <kim.phillips@freescale.com>
41152 Date: Tue Nov 28 23:28:33 2006 -0600
41154 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
41156 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
41157 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
41159 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
41160 Author: Timur Tabi <timur@freescale.com>
41161 Date: Tue Nov 28 12:09:35 2006 -0600
41163 mpc83xx: Miscellaneous code style fixes
41165 Implement various code style fixes and similar changes.
41167 Signed-off-by: Timur Tabi <timur@freescale.com>
41169 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
41170 Author: Stefan Roese <sr@denx.de>
41171 Date: Tue Nov 28 17:55:49 2006 +0100
41173 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
41175 This patch adds the code and configuration necessary to boot with an
41176 arch/powerpc Linux kernel.
41178 Signed-off-by: Grant Likely <grant.likely@gmail.com>
41179 Acked-by: Jon Loeliger <jdl@freescale.com>
41181 commit e732faec95a83cb468b4850ae807c8301dde8f6a
41182 Author: Stefan Roese <sr@denx.de>
41183 Date: Tue Nov 28 16:09:24 2006 +0100
41185 [PATCH] PPC4xx: 440SP Rev. C detection added
41187 Signed-off-by: Stefan Roese <sr@denx.de>
41189 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
41190 Author: Stefan Roese <sr@denx.de>
41191 Date: Tue Nov 28 11:04:45 2006 +0100
41193 [PATCH] nand: Fix patch merge problem
41195 Signed-off-by: Stefan Roese <sr@denx.de>
41197 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
41198 Author: Stefan Roese <sr@denx.de>
41199 Date: Tue Nov 28 11:04:45 2006 +0100
41201 [PATCH] nand: Fix patch merge problem
41203 Signed-off-by: Stefan Roese <sr@denx.de>
41205 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
41206 Author: Wolfgang Denk <wd@pollux.denx.de>
41207 Date: Mon Nov 27 22:53:53 2006 +0100
41211 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
41212 Author: Stefan Roese <sr@denx.de>
41213 Date: Mon Nov 27 17:43:25 2006 +0100
41215 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
41217 Patch below corrects the setting of the zmiifer register, it was
41218 overwritting the register rather than ORing the settings.
41220 Signed-off-by: Neil Wilson <NWilson@airspan.com>
41221 Signed-off-by: Stefan Roese <sr@denx.de>
41223 commit d1a72545296800b7e219f93104ad5836f0003d66
41224 Author: Stefan Roese <sr@denx.de>
41225 Date: Mon Nov 27 17:34:10 2006 +0100
41227 [PATCH] Select NAND embedded environment from board configuration
41229 The current NAND Bootloader setup forces the environment
41230 variables to be in line with the bootloader. This change
41231 enables the configuration to be made in the board include
41232 file instead so that it can be individually enabled.
41234 Signed-off-by: Nick Spence <nick.spence@freescale.com>
41235 Signed-off-by: Stefan Roese <sr@denx.de>
41237 commit 15784862857c3c2214498defcfed84ff137fb81e
41238 Author: Stefan Roese <sr@denx.de>
41239 Date: Mon Nov 27 17:22:19 2006 +0100
41241 [PATCH] nand_wait() timeout fixes
41243 Two fixes for the nand_wait() function in
41244 drivers/nand/nand_base.c:
41246 1. Use correct timeouts. The original timeouts in Linux
41247 source are 400ms and 20ms not 40s and 20s
41249 2. Return correct error value in case of timeout. 0 is
41252 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
41253 Signed-off-by: Stefan Roese <sr@denx.de>
41255 commit da5553b095bf04f4f109ad7e565dae3aba47b230
41256 Author: Stefan Roese <sr@denx.de>
41257 Date: Mon Nov 27 17:04:06 2006 +0100
41259 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
41261 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
41262 arguments to bootm. It removes the getenv("disable_of") test that used
41263 to be used for this purpose.
41265 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
41266 Acked-by: Jon Loeliger <jdl@freescale.com>
41268 commit a9398e018593782c5fa7d0741955fc1256b34c1e
41269 Author: Wolfgang Denk <wd@pollux.denx.de>
41270 Date: Mon Nov 27 15:32:42 2006 +0100
41272 Minor code cleanup. Update CHANGELOG.
41274 commit 1729b92cde575476684bffe819d0b7791b57bff2
41275 Author: Stefan Roese <sr@denx.de>
41276 Date: Mon Nov 27 14:52:04 2006 +0100
41278 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
41280 Signed-off-by: Stefan Roese <sr@denx.de>
41282 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
41283 Author: Stefan Roese <sr@denx.de>
41284 Date: Mon Nov 27 14:49:51 2006 +0100
41286 [PATCH] alpr: remove unused board specific flash driver
41288 Signed-off-by: Stefan Roese <sr@denx.de>
41290 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
41291 Author: Stefan Roese <sr@denx.de>
41292 Date: Mon Nov 27 14:48:41 2006 +0100
41294 [PATCH] 4xx: Fix problem with board specific reset code
41296 Signed-off-by: Stefan Roese <sr@denx.de>
41298 commit ec0c2ec725aec9524a177a77ce75559e644a931a
41299 Author: Stefan Roese <sr@denx.de>
41300 Date: Mon Nov 27 14:46:06 2006 +0100
41302 [PATCH] Remove testing 4xx enet PHY setup
41304 Signed-off-by: Stefan Roese <sr@denx.de>
41306 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
41307 Author: Stefan Roese <sr@denx.de>
41308 Date: Mon Nov 27 14:12:17 2006 +0100
41310 [PATCH] Update Prodrive ALPR board support (440GX)
41312 Signed-off-by: Stefan Roese <sr@denx.de>
41314 commit 58b485776698c3d71ec5a215e392123b4c15afa3
41315 Author: Markus Klotzbuecher <mk@denx.de>
41316 Date: Mon Nov 27 11:51:21 2006 +0100
41318 Add a small README with information on the generic ohci driver.
41320 commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
41321 Author: Markus Klotzbuecher <mk@denx.de>
41322 Date: Mon Nov 27 11:46:46 2006 +0100
41324 Fix some endianness issues related to the generic ohci driver
41326 commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
41327 Author: Markus Klotzbuecher <mk@denx.de>
41328 Date: Mon Nov 27 11:44:58 2006 +0100
41330 Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
41331 to choose between the old and the generic OHCI drivers.
41333 commit 53e336e9ffc51035bdc4e5867631b3378761b4df
41334 Author: Markus Klotzbuecher <mk@denx.de>
41335 Date: Mon Nov 27 11:43:09 2006 +0100
41337 Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
41338 and adapted board configs TQM5200 and yosemite accordingly. This commit
41339 also makes the maximum number of root hub ports configurable
41340 (CFG_USB_OHCI_MAX_ROOT_PORTS).
41342 commit 78d620ebb5871d252270dedfad60c6568993b780
41343 Author: Wolfgang Denk <wd@atlas.denx.de>
41344 Date: Thu Nov 23 22:58:58 2006 +0100
41346 Updates for TQM5200 modules:
41347 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
41348 - simplify "udate" definitions
41350 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
41351 Author: Stefan Roese <sr@denx.de>
41352 Date: Wed Nov 22 13:20:50 2006 +0100
41354 [PATCH] PPC4xx start.S: Fix for processor errata
41356 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
41357 errata 1.12: 440_33 by moving patch up in code.
41359 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
41360 Signed-off-by: Stefan Roese <sr@denx.de>
41362 commit 4ef6251403f637841000e0fef9e832aa01339822
41363 Author: Stefan Roese <sr@denx.de>
41364 Date: Mon Nov 20 20:39:52 2006 +0100
41366 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
41368 Signed-off-by: Stefan Roese <sr@denx.de>
41370 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
41371 Author: Wolfgang Denk <wd@pollux.denx.de>
41372 Date: Mon Nov 20 10:28:30 2006 +0100
41376 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
41377 Author: Stefan Roese <sr@denx.de>
41378 Date: Mon Nov 13 13:55:24 2006 +0100
41380 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
41382 * Adds support for AMD command set Top Boot flash geometry reversal
41383 * Adds support for reading JEDEC Manufacturer ID and Device ID
41384 * Adds support for displaying command set, manufacturer id and
41385 device ids (flinfo)
41386 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
41387 * Removes outdated change history (refer to git log instead)
41389 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
41390 Signed-off-by: Stefan Roese <sr@denx.de>
41392 commit b21b511d4c50408f4853f46f06b601272196223f
41393 Author: Wolfgang Denk <wd@pollux.denx.de>
41394 Date: Sun Nov 12 21:13:23 2006 +0100
41398 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
41399 Author: Bartlomiej Sieka <tur@semihalf.com>
41400 Date: Sat Nov 11 22:48:22 2006 +0100
41402 Disable the watchdog in the default config for the V38B board.
41404 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
41405 Author: Bartlomiej Sieka <tur@semihalf.com>
41406 Date: Sat Nov 11 22:43:00 2006 +0100
41408 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
41409 group is enabled for USB earlier (in cpu_init_f() instead of
41410 usb_lowlevel_init()).
41412 commit 91650b3e4de688038d4f71279c44858e3e2c6870
41413 Author: Wolfgang Denk <wd@pollux.denx.de>
41414 Date: Mon Nov 6 17:06:36 2006 +0100
41416 Sequential accesses to non-existent memory must be synchronized,
41417 at least on G2 cores.
41419 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
41421 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
41422 Author: Timur Tabi <timur@freescale.com>
41423 Date: Fri Nov 3 19:15:00 2006 -0600
41425 mpc83xx: Update 83xx to use fsl_i2c.c
41427 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
41428 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
41429 Added multiple I2C bus support to fsl_i2c.c.
41431 Signed-off-by: Timur Tabi <timur@freescale.com>
41433 commit d239d74b1c937984bc519083a8e7de373a390f06
41434 Author: Timur Tabi <timur@freescale.com>
41435 Date: Fri Nov 3 12:00:28 2006 -0600
41437 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
41439 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
41440 tree matches the other 8xxx trees.
41442 Signed-off-by: Timur Tabi <timur@freescale.com>
41444 commit f7fb2e703ec9688541416962724adff70a7322cb
41445 Author: Kim Phillips <kim.phillips@freescale.com>
41446 Date: Thu Nov 2 19:47:11 2006 -0600
41448 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
41450 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
41451 Author: Dave Liu <daveliu@freescale.com>
41452 Date: Thu Nov 2 18:05:50 2006 -0600
41454 mpc83xx: Fix the incorrect dcbz operation
41456 The 834x rev1.x silicon has one CPU5 errata.
41458 The issue is when the data cache locked with
41459 HID0[DLOCK], the dcbz instruction looks like no-op inst.
41461 The right behavior of the data cache is when the data cache
41462 Locked with HID0[DLOCK], the dcbz instruction allocates
41465 The 834x rev3.0 and later and 8360 have not this bug inside.
41467 So, when 834x rev3.0/8360 are working with ECC, the dcbz
41468 instruction will corrupt the stack in cache, the processor will
41471 However, the 834x rev1.x can work with ECC with these code,
41472 because the sillicon has this cache bug. The dcbz will not
41473 corrupt the stack in cache.
41474 Really, it is the fault code running on fault sillicon.
41476 This patch fix the incorrect dcbz operation. Instead of
41477 CPU FP writing to initialise the ECC.
41480 * Fix the incorrect dcbz operation instead of CPU FP
41481 writing to initialise the ECC memory. Otherwise, it
41482 will corrupt the stack in cache, The processor will checkstop
41485 Signed-off-by: Dave Liu <daveliu@freescale.com>
41487 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
41488 Author: Kim Phillips <kim.phillips@freescale.com>
41489 Date: Wed Nov 1 00:10:40 2006 -0600
41491 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
41493 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
41494 STDOUT_PATH configuration bits to mpc8349emds,
41495 mpc8349itx, and mpc8360emds board code.
41497 redo environment to use bootm with the fdtaddr
41498 for booting ARCH=powerpc kernels by default,
41499 and provide default fdtaddr values.
41501 commit 48041365b3420589ad464ebc7752e0053538b729
41502 Author: Kim Phillips <kim.phillips@freescale.com>
41503 Date: Wed Nov 1 00:07:25 2006 -0600
41505 mpc83xx: change ft code to modify local-mac-address property
41507 Update 83xx OF code to update local-mac-address properties
41508 for ethernet instead of the obsolete 'address' property.
41510 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
41511 Author: Timur Tabi <timur@freescale.com>
41512 Date: Tue Oct 31 21:23:16 2006 -0600
41514 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
41516 This patch also adds an improved I2C set_speed(), which handles all clock
41519 Signed-off-by: Timur Tabi <timur@freescale.com>
41521 commit ac4b5622ce050b5ee1e154b98df630d778661632
41522 Author: Dave Liu <daveliu@freescale.com>
41523 Date: Tue Oct 31 19:54:59 2006 -0600
41525 mpc83xx: add the README.mpc8360emds
41527 add doc/README.mpc8360emds to accompany the new board support
41529 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
41530 Author: Dave Liu <daveliu@freescale.com>
41531 Date: Fri Nov 3 12:11:15 2006 -0600
41533 mpc83xx: add QE ethernet support
41535 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
41537 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
41538 Author: Dave Liu <daveliu@freescale.com>
41539 Date: Fri Nov 3 19:33:44 2006 -0600
41541 mpc83xx: Add MPC8360EMDS basic board support
41543 Add support for the Freescale MPC8360EMDS board.
41544 Includes DDR, DUART, Local Bus, PCI.
41546 commit 23892e49352de74f7fac36ff90bb1be143d195e3
41547 Author: Dave Liu <daveliu@freescale.com>
41548 Date: Tue Oct 31 19:30:40 2006 -0600
41550 mpc83xx: add the QUICC Engine (QE) immap file
41552 common QE immap file. Also required for 8360.
41554 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
41555 Author: Dave Liu <daveliu@freescale.com>
41556 Date: Tue Oct 31 19:25:38 2006 -0600
41558 mpc83xx: Add 8360 specifics to 83xx immap
41560 Mainly add QE device dependencies, with appropriate 8360 protection.
41563 commit 988833324a7fda482c8ac3ca23eb539f8232e404
41564 Author: Timur Tabi <timur@freescale.com>
41565 Date: Tue Oct 31 19:14:41 2006 -0600
41567 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
41569 PREREQUISITE PATCHES:
41571 * This patch can only be applied after the following patches have been applied:
41573 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
41574 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
41578 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
41579 the clock for the 2nd USB board (Linux kernel will hang otherwise),
41580 and fix the CONFIG_BOOTARGS macro.
41582 Signed-off-by: Timur Tabi <timur@freescale.com>
41584 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
41585 Author: Timur Tabi <timur@freescale.com>
41586 Date: Tue Oct 31 18:44:42 2006 -0600
41588 mpc83xx: Add support for the MPC8349E-mITX
41590 PREREQUISITE PATCHES:
41592 * This patch can only be applied after the following patches have been applied:
41594 1) DNX#2006090742000024 "Add support for multiple I2C buses"
41595 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
41596 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
41597 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
41598 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
41602 * Add support for the Freescale MPC8349E-mITX reference design platform.
41603 The second TSEC (Vitesse 7385 switch) is not supported at this time.
41605 Signed-off-by: Timur Tabi <timur@freescale.com>
41607 commit 183da6d9b446cc12123455844ad1187e2375626f
41608 Author: Ben Warren <bwarren@qstreams.com>
41609 Date: Tue Sep 12 10:15:53 2006 -0400
41611 Additional MPC8349 support for multibus i2c
41615 Here is a patch for a file that was accidentally left out of a previous
41618 It accompanies the patch with ticket DNX#2006090742000024
41621 Change PCI initialization to use new multi-bus I2C API.
41626 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
41627 Author: Ben Warren <bwarren@qstreams.com>
41628 Date: Thu Sep 7 16:51:04 2006 -0400
41630 Multi-bus I2C implementation of MPC834x
41634 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
41635 family and the MPC8349EMDS board in particular.
41636 This patch requires Patch 1 (Add support for multiple I2C buses).
41637 Testing was performed on a 533MHz board.
41639 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
41641 Signed-off-by: Ben Warren <bwarren@qstreams.com>
41644 Implemented driver-level code to support two I2C buses on the
41645 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
41646 are 50kHz, 100kHz and 400kHz on each bus.
41651 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
41652 Author: Ben Warren <bwarren@qstreams.com>
41653 Date: Thu Sep 7 16:50:54 2006 -0400
41655 Add support for multiple I2C buses
41659 Attached is a patch providing support for multiple I2C buses at the
41660 command level. The second part of the patch includes an implementation
41661 for the MPC834x CPU and MPC8349EMDS board.
41663 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
41665 Signed-off-by: Ben Warren <bwarren@qstreams.com>
41669 1. Include new 'i2c' command (based on USB implementation) using
41670 CONFIG_I2C_CMD_TREE.
41672 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
41673 the commands to change bus number and speed are only available under the
41674 new 'i2c' command mentioned in the first bullet.
41676 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
41677 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
41678 of an array of bus-device pairs. Otherwise, it is an array of uchar.
41681 Added new 'i2c' master command for all I2C interaction. This is
41682 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
41683 setting I2C bus speed as well as changing the active bus if the board
41684 has more than one (conditionally compiled with
41685 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
41691 commit bed85caf872714ebf53013967a695c9d63acfc68
41692 Author: Timur Tabi <timur@freescale.com>
41693 Date: Tue Oct 31 18:13:36 2006 -0600
41695 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
41699 * Errata DDR6, which affects all current MPC 834x processors, lists changes
41700 required to maintain compatibility with various types of DDR memory. This
41701 patch implements those changes.
41703 Signed-off-by: Timur Tabi <timur@freescale.com>
41705 commit afd6e470f639883002c7c59d562690a5cb0f4865
41706 Author: Timur Tabi <timur@freescale.com>
41707 Date: Wed Oct 25 18:45:23 2006 -0500
41709 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
41711 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
41712 Author: Timur Tabi <timur@freescale.com>
41713 Date: Tue Aug 22 17:07:00 2006 -0500
41715 mpc83xx: Add support for variable flash memory sizes on 83xx systems
41719 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
41720 window registers, instead of using a hard-coded value of 8MB.
41722 Signed-off-by: Timur Tabi <timur@freescale.com>
41724 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
41725 Author: Tanya Jiang <tanya.jiang@freescale.com>
41726 Date: Thu Aug 3 18:38:13 2006 +0800
41728 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
41730 Unified TQM834x variable names with 83xx and consolidated macro
41731 in preparation for the 8360 and other upcoming 83xx devices.
41733 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41735 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
41736 Author: Dave Liu <daveliu@freescale.com>
41737 Date: Wed Oct 25 14:41:21 2006 -0500
41739 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
41741 Incorporated the common unified variable names and the changes in preparation
41742 for releasing mpc8360 patches.
41744 Signed-off-by: Dave Liu <daveliu@freescale.com>
41746 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
41747 Author: Tanya Jiang <tanya.jiang@freescale.com>
41748 Date: Thu Aug 3 18:36:02 2006 +0800
41750 mpc83xx: Fix missing build for mpc8349emds pci.c
41752 Make pci build for mpc8349emds
41754 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41756 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
41757 Author: Tanya Jiang <tanya.jiang@freescale.com>
41758 Date: Thu Aug 3 18:39:49 2006 +0800
41760 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
41762 Removed unused file resetvec.S for mpc83xx cpu
41764 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
41766 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
41767 Author: Nick Spence <Nick.Spence@freescale.com>
41768 Date: Sat Sep 30 00:32:59 2006 -0700
41770 NAND Flash verify across block boundaries
41772 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
41774 and the write crosses a block boundary. The pointer to the verification
41775 buffer (bufstart) is not being updated to reflect the starting of the
41777 block so the verification of the second block fails.
41781 * Fix NAND FLASH page verification across block boundaries
41783 commit f484dc791a3932537213c43c654cc1295c64b84c
41784 Author: Nick Spence <nick.spence@freescale.com>
41785 Date: Thu Sep 7 07:39:46 2006 -0700
41787 Added RGMII support to the TSECs and Marvell 881111 Phy
41789 Added a phy initialization to adjust the RGMII RX and TX timing
41790 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
41792 Signed-off-by: Nick Spence <nick.spence@freescale.com>
41794 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
41795 Author: roy zang <tie-fei.zang@freescale.com>
41796 Date: Fri Nov 3 13:10:00 2006 +0800
41798 Remove some unused CFG define.
41799 undef CFG_DRAM_TEST
41801 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
41802 Author: roy zang <tie-fei.zang@freescale.com>
41803 Date: Fri Nov 3 13:07:36 2006 +0800
41805 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
41806 Both work. 0xFF000000 seems more reasonable.
41808 commit c59200443072353044aa4bf737a5a60f9a9af231
41809 Author: Wolfgang Denk <wd@pollux.denx.de>
41810 Date: Thu Nov 2 15:15:01 2006 +0100
41812 Release U-Boot 1.1.6
41814 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
41815 Author: roy zang <tie-fei.zang@freescale.com>
41816 Date: Thu Nov 2 19:14:48 2006 +0800
41818 This patch comes from Yuli's posted patch on 8/8/2006
41819 titled "CFI Driver Little-Endian write Issue".
41821 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
41823 If that patch applied, please discard this one.
41824 Until now , I do not see his patch is applied. So please apply this one.
41826 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
41827 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41829 commit b825f158e449e1e9cf74c08e572955e122394c96
41830 Author: roy zang <tie-fei.zang@freescale.com>
41831 Date: Thu Nov 2 19:12:31 2006 +0800
41833 Tsi108 on chip i2c support.
41835 The i2c Interface provides a master-only, serial interface that can be
41836 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
41839 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41840 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41842 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
41843 Author: roy zang <tie-fei.zang@freescale.com>
41844 Date: Thu Nov 2 19:11:06 2006 +0800
41846 Tsi108 on chip pci controller support.
41848 If there is no pci card, the tsi108/109 pci configure read will
41849 cause a machine check exception to the processor. PCI error should
41850 also be cleared after the read.
41852 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41853 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41855 commit d1927cee977126e547ceeba23e4f978f377cfb8f
41856 Author: roy zang <tie-fei.zang@freescale.com>
41857 Date: Thu Nov 2 19:08:55 2006 +0800
41859 Tundra tsi108 on chip Ethernet controller support.
41861 The following is a brief description of the Ethernet controller:
41862 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
41863 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
41864 to manage the two physical connection devices (PHYs). Each Ethernet port
41865 has its own statistics monitor that tracks and reports key interface
41866 statistics. Each port supports a 256-entry hash table for address
41867 filtering. In addition, each port is bridged to the Switch Fabric
41868 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
41870 Each Ethernet port also has a pair of internal Ethernet DMA channels to
41871 support the transmit and receive data flows. The Ethernet DMA channels
41872 use descriptors set up in memory, the memory map of the device, and
41873 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
41874 handles arbitration for the Switch Fabric. The Controller also
41875 has a register businterface for register accesses and status monitor
41878 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
41879 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
41880 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
41881 data flows to and from the Ethernet Controller through the Switch Fabric.
41883 Each Ethernet port uses its transmit and receive DMA channels to manage
41884 data flows through buffer descriptors that are predefined by the
41885 system (the descriptors can exist anywhere in the system memory map).
41886 These descriptors are data structures that point to buffers filled
41887 with data ready to transmit over Ethernet, or they point to empty
41888 buffers ready to receive data from Ethernet.
41890 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41891 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41893 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
41894 Author: roy zang <tie-fei.zang@freescale.com>
41895 Date: Thu Nov 2 19:01:33 2006 +0800
41897 Tundra tsi108 header file.
41899 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
41900 PowerPC processors that offers numerous system interconnect options for
41901 embedded application designers. The Tsi108 can interconnect 60x or
41902 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
41903 and Flash. Provided the macro define for tsi108 chip.
41905 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41906 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41908 commit 87c4db09699c6b89176b31004afcb83eb1585d47
41909 Author: roy zang <tie-fei.zang@freescale.com>
41910 Date: Thu Nov 2 18:59:15 2006 +0800
41912 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
41913 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
41915 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41916 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41918 commit 27801b8ab11c61b577e45742a515bb3b23b80241
41919 Author: roy zang <tie-fei.zang@freescale.com>
41920 Date: Thu Nov 2 18:57:21 2006 +0800
41922 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
41923 Make ,config.mk and link file for the mpc7448hpc2 board.
41925 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41926 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41928 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
41929 Author: roy zang <tie-fei.zang@freescale.com>
41930 Date: Thu Nov 2 18:55:04 2006 +0800
41932 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
41933 The mpc7448hpc2 board support header file.
41935 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41936 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41938 commit 625bb5ddb50b243f931262ca8c46956409471917
41939 Author: roy zang <tie-fei.zang@freescale.com>
41940 Date: Thu Nov 2 18:52:21 2006 +0800
41942 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
41943 The mpc7448hpc2 board support low level assemble language init code.
41945 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41946 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41948 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
41949 Author: roy zang <tie-fei.zang@freescale.com>
41950 Date: Thu Nov 2 18:49:51 2006 +0800
41952 General code modification for mpc7448hpc2 board support.
41953 1. Add 7447A and 7448 processor support.
41954 2. Add the following flags.
41956 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
41957 (such as by switch on board), this flag should be set.
41959 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
41960 relocates to RAM, this flag should be set.
41962 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
41963 system hang in exception, this flag should be set.
41965 There is a design issue for tsi108/109 pci configure read. When pci scan
41966 the slots, if there is no pci card, the tsi108/9 will cause a machine
41967 check exception for mpc7448 processor.
41969 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
41970 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41972 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
41973 Author: roy zang <tie-fei.zang@freescale.com>
41974 Date: Thu Nov 2 18:34:47 2006 +0800
41976 Add README file for mpc7448hpc2 board.
41977 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
41979 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
41980 Author: Bartlomiej Sieka <tur@semihalf.com>
41981 Date: Wed Nov 1 02:04:38 2006 +0100
41983 Finish up support for MarelV38B board
41984 - add watchdog support
41985 - enable GPIO_WKUP_7 pin for input
41988 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
41989 Author: Bartlomiej Sieka <tur@semihalf.com>
41990 Date: Wed Nov 1 01:45:46 2006 +0100
41992 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
41993 * remove warnings when compiling ethaddr.c
41994 * adjust linker script (fixes a crash resulting from incorrect
41995 definition of __u_boot_cmd_start)
41996 - Some MarelV38B code cleanup.
41998 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
41999 Author: Bartlomiej Sieka <tur@semihalf.com>
42000 Date: Wed Nov 1 01:38:16 2006 +0100
42002 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
42003 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
42004 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
42005 MPC5XXX_WU_GPIO_DATA_O for affected boards.
42007 - Add defintions for some MPC5XXX GPIO pins.
42009 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
42010 Author: Bartlomiej Sieka <tur@semihalf.com>
42011 Date: Wed Nov 1 01:34:29 2006 +0100
42013 Changed MarelV38B board make target to lowercase. Config file cleanup.
42015 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
42016 Author: Wolfgang Denk <wd@pollux.denx.de>
42017 Date: Sun Oct 29 01:03:51 2006 +0200
42019 Automatically adjust ARFLAGS so "make -s" is really silent.
42021 commit fae684e89844856383bdf101440889557df3e6b1
42022 Author: Stefan Roese <sr@denx.de>
42023 Date: Sat Oct 28 16:45:00 2006 +0200
42025 [PATCH] omap925.c: Remove unused functions
42027 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42028 Signed-off-by: Stefan Roese <sr@denx.de>
42030 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
42031 Author: Stefan Roese <sr@denx.de>
42032 Date: Sat Oct 28 17:12:58 2006 +0200
42034 [PATCH] Add some missing machtypes for netstar & voiceblue boards
42036 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
42039 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42040 Signed-off-by: Stefan Roese <sr@denx.de>
42042 commit 856f054410cef52d868feb330168b2a4c4091328
42043 Author: Stefan Roese <sr@denx.de>
42044 Date: Sat Oct 28 15:55:52 2006 +0200
42046 [PATCH] NAND: Partition name support added to NAND subsystem
42048 chpart, nboot and NAND subsystem related commands now accept also partition
42049 name to specify offset.
42051 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
42052 Signed-off-by: Stefan Roese <sr@denx.de>
42054 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
42055 Author: Wolfgang Denk <wd@pollux.denx.de>
42056 Date: Sat Oct 28 02:29:44 2006 +0200
42060 commit 2751a95abd1b96911081c357e96a12fa97b40dee
42061 Author: Wolfgang Denk <wd@pollux.denx.de>
42062 Date: Sat Oct 28 02:29:14 2006 +0200
42064 Enable commandline editing and hush shell on all TQM boards.
42066 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
42067 Author: Wolfgang Denk <wd@pollux.denx.de>
42068 Date: Sat Oct 28 02:28:02 2006 +0200
42070 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
42072 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
42073 Author: Wolfgang Denk <wd@denx.de>
42074 Date: Sat Oct 28 01:14:32 2006 +0200
42076 Check for illegal character '=' in environment variable names.
42078 Make sure the string passed as variable name does not contain a '='
42079 character. This not only prevents the common error or typing
42080 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
42081 also closes a backdoor which allowed to delete write-protected
42082 environment variables, for example by using "setenv ethaddr=".
42084 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
42085 Author: Wolfgang Denk <wd@pollux.denx.de>
42086 Date: Sat Oct 28 00:38:39 2006 +0200
42088 Minor code cleanup.
42090 commit e11887a77d81077416a2d1c5e0354916fee8c034
42091 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42092 Date: Thu Oct 26 17:55:31 2006 +0200
42094 Don't pass any debug options directly to the assembler
42096 When passing the -g option to gcc, gcc automatically selects a
42097 suitable --g<format> option to pass on to the assembler.
42098 Thus, there's no point in forcing a specific debug option on the
42099 assembler using the -Wa mechanism.
42101 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42103 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
42104 Author: Jon Loeliger <jdl@freescale.com>
42105 Date: Fri Oct 27 07:47:22 2006 -0500
42107 MPC86xx: Cleaned up unused and conditionally used local variables.
42109 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42111 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
42112 Author: Wolfgang Denk <wd@pollux.denx.de>
42113 Date: Fri Oct 27 11:55:21 2006 +0200
42115 Fix "ar" flags in some Makefiles to allow for silent "make -s"
42117 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
42118 Author: Ben Warren <bwarren@qstreams.com>
42119 Date: Thu Oct 26 14:38:25 2006 -0400
42121 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
42122 to a TSEC (e.g. a switch is connected via RMII) or
42123 if the PHY is defective/incorrectly configured.
42125 Signed-off-by: Ben Warren <bwarren@qstreams.com>
42127 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
42128 Author: Ben Warren <bwarren@qstreams.com>
42129 Date: Thu Oct 26 14:38:25 2006 -0400
42131 Fix TSEC driver: avoid crashes if PHY is not attached
42132 to a TSEC (e.g. a switch is connected via RMII) or
42133 if the PHY is defective/incorrectly configured.
42135 Signed-off-by: Ben Warren <bwarren@qstreams.com>
42137 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
42138 Author: Wolfgang Denk <wd@pollux.denx.de>
42139 Date: Thu Oct 26 16:24:31 2006 +0200
42143 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
42144 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
42145 Date: Wed Oct 25 15:48:59 2006 +0200
42147 Finish up support for the ATSTK1000/ATSTK1002 boards
42149 Add atstk1002_config target to Makefile and move the AVR32 section
42150 down below Blackfin so that it doesn't end up in the middle of
42153 Drop the autogenerated linker script thing for now. Will have to
42154 revisit how to handle chips with different flash and RAM layout
42157 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42159 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
42160 Author: Kumar Gala <galak@kernel.crashing.org>
42161 Date: Tue Oct 24 23:47:37 2006 -0500
42163 Added support for Multi-Image files that contain a device tree
42165 If a Multi-Image file contains a third image we try to use it as a
42166 device tree. The device tree image is assumed to be uncompressed in the
42167 image file. We automatically allocate space for the device tree in memory
42168 and provide an 8k pad to allow more than a reasonable amount of growth.
42170 Additionally, a device tree that was contained in flash will now automatically
42171 get copied to system memory as part of boot. Previously an error was
42172 reported if one tried to boot a device tree that was in flash.
42174 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
42176 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
42177 Author: Wolfgang Denk <wd@denx.de>
42178 Date: Tue Oct 24 21:35:55 2006 +0200
42180 Switch to automatically generated CHANGELOG file.
42181 (use "make CHANGELOG" to update it from time to time)
42183 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
42184 Author: Stefan Roese <sr@denx.de>
42185 Date: Tue Oct 24 18:06:48 2006 +0200
42187 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
42188 Patch by Stefan Roese, 24 Oct 2006
42190 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
42191 Author: Wolfgang Denk <wd@pollux.denx.de>
42192 Date: Tue Oct 24 17:24:55 2006 +0200
42194 Merge with /home/wd/git/u-boot/master
42196 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
42197 Author: Wolfgang Denk <wd@pollux.denx.de>
42198 Date: Tue Oct 24 15:32:57 2006 +0200
42202 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
42203 Author: Wolfgang Denk <wd@pollux.denx.de>
42204 Date: Tue Oct 24 14:51:36 2006 +0200
42206 Move atstk1000 files into vendor specific directory.
42207 Patch by Haavard Skinnemoen, 12 Sep 2006
42209 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
42210 Author: Wolfgang Denk <wd@pollux.denx.de>
42211 Date: Tue Oct 24 14:42:37 2006 +0200
42213 Add ATSTK1000 and ATSTK1002 board support
42214 Patch by Haavard Skinnemoen, 06 Sep 2006
42216 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
42219 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
42220 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
42221 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
42222 CompactFlash cards. For more information, please see this page:
42224 http://www.atmel.com/dyn/products/tools.asp?family_id=682
42226 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
42229 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42231 commit f93ae788c3640fcde5db383471d45548ff4060d0
42232 Author: Wolfgang Denk <wd@pollux.denx.de>
42233 Date: Tue Oct 24 14:31:24 2006 +0200
42235 Add common serial driver for Atmel AT32 and AT91 chips
42236 Patch by Haavard Skinnemoen, 06 Sep 2006
42238 This is a first attempt at creating a common serial driver for Atmel
42239 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
42240 be possible to support AT91RM9200 and other ARM-based chips with some
42241 minor modifications.
42243 There's nothing fundamentally AVR32-specific in this driver, but it
42244 does use some features which are currently only defined for the
42246 * pm_get_clock_freq: Obtain the clock frequency of a given domain
42247 * gd->console_uart: A "struct device" containing information about
42248 register mappings, gpio resources and clocks associated with the
42251 For more information about these features, please see the "AT32AP
42254 commit 72a087e04705c26cad982879ebd06b5281bf825a
42255 Author: Wolfgang Denk <wd@pollux.denx.de>
42256 Date: Tue Oct 24 14:27:35 2006 +0200
42258 Add AT32AP CPU and AT32AP7000 SoC support
42259 Patch by Haavard Skinnemoen, 06 Sep 2006
42261 This patch adds support for the AT32AP CPU family and the AT32AP7000
42262 chip, which is the first chip implementing the AVR32 architecture.
42264 The AT32AP CPU core is a high-performance implementation featuring a
42265 7-stage pipeline, separate instruction- and data caches, and a MMU.
42266 For more information, please see the "AVR32 AP Technical Reference":
42268 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
42270 In addition to this, the AT32AP7000 chip comes with a large set of
42271 integrated peripherals, many of which are shared with the AT91 series
42272 of ARM-based microcontrollers from Atmel. Full data sheet is
42275 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
42277 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42279 commit 7b64fef33c66be648826c0ff9758298ef13d0604
42280 Author: Wolfgang Denk <wd@pollux.denx.de>
42281 Date: Tue Oct 24 14:21:16 2006 +0200
42283 Add AVR32 architecture support
42284 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
42286 This patch adds common infrastructure code for the Atmel AVR32
42287 architecture. See doc/README.AVR32 for details.
42289 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
42291 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
42292 Author: Wolfgang Denk <wd@pollux.denx.de>
42293 Date: Tue Oct 24 13:57:33 2006 +0200
42295 Use -g instead of -gstabs in AFLAGS_DEBUG
42296 Patch by Haavard Skinnemoen, 30 Aug 2006
42298 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
42299 matter what the target's preferred debugging format is. This patch
42300 simply replaces -gstabs with -g, so that the default debugging format
42301 for the architecture is used.
42303 commit 965829872169c2996023840d98e1d85ad148d629
42304 Author: Wolfgang Denk <wd@pollux.denx.de>
42305 Date: Tue Oct 24 13:55:18 2006 +0200
42307 Fix/workaround broken dependency handling with make 3.81
42308 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
42310 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
42311 Author: Marian Balakowicz <m8@semihalf.com>
42312 Date: Mon Oct 23 22:17:05 2006 +0200
42314 Fix sequoia separate object direcory building problems.
42316 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
42317 Author: Jon Loeliger <jdl@freescale.com>
42318 Date: Fri Oct 20 17:16:35 2006 -0500
42320 Use generic I2C register block on 85xx and 86xx.
42322 Replace private IMMAP I2C structures with generic reg block
42323 and allow 86xx to have multiple I2C device busses.
42325 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42327 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
42328 Author: Jon Loeliger <jdl@freescale.com>
42329 Date: Fri Oct 20 15:54:34 2006 -0500
42331 Fix compilation warnings on a few 85xx boards.
42333 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42335 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
42336 Author: Jon Loeliger <jdl@freescale.com>
42337 Date: Fri Oct 20 15:50:15 2006 -0500
42339 Converted all 85xx boards to use a common FSL I2C driver.
42340 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
42341 And removed hard i2c path from a few u-boot.lds scipts too.
42342 Minor whitespace cleanups along the way.
42344 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42346 commit 4d45f69e362b05892c9e92a7907e5820995612aa
42347 Author: Jon Loeliger <jdl@freescale.com>
42348 Date: Thu Oct 19 12:02:24 2006 -0500
42350 Rewrite a series of goto statements as a sequences of
42351 conditional expressions instead.
42353 Use consistent return code 0/-1 for good/bad indicators.
42355 Include one fewer file if the driver isn't used at all.
42357 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42359 commit 7237c033b02fe295880435f1eb80819a0c987532
42360 Author: Jon Loeliger <jdl@freescale.com>
42361 Date: Thu Oct 19 11:02:16 2006 -0500
42363 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
42365 in an effort to begin to unify the umpteen FSL I2C drivers that
42366 are all otherwise very similar.
42368 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42370 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
42371 Author: Jon Loeliger <jdl@freescale.com>
42372 Date: Thu Oct 19 11:33:52 2006 -0500
42374 * Fix a bunch of compiler warnings for gcc 4.0
42376 Signed-off-by: Matthew McClintock <msm@freescale.com>
42378 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
42379 Author: Stefan Roese <sr@denx.de>
42380 Date: Tue Oct 17 06:14:31 2006 +0200
42382 Add monitor functions for indirect access to PPC440 DCR's
42383 Patch by Leonid Baryudin, 12 Oct 2006
42385 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
42386 Author: Jon Loeliger <jdl@freescale.com>
42387 Date: Fri Oct 13 16:47:53 2006 -0500
42389 Fixed leading whitespace issues.
42390 Removed spurious LAWAR thing.
42392 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42394 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
42395 Author: Jon Loeliger <jdl@freescale.com>
42396 Date: Thu Oct 12 10:42:36 2006 -0500
42398 Remove unneeded include files and local variable.
42400 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42402 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
42403 Author: Grant Likely <grant.likely@secretlab.ca>
42404 Date: Tue Oct 10 00:23:32 2006 -0600
42406 Fix possible uninitialized variable compiler warning.
42408 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
42409 do_bootm_linux() may be uninitialized. There is no possibility in the
42410 current code that len will get used uninitialized, but this fix follows
42411 the existing convention of setting both len and data to zero at the same
42414 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
42416 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
42417 Author: Matthew McClintock <msm@freescale.com>
42418 Date: Wed Oct 11 15:13:01 2006 -0500
42420 * Fix a bunch of compiler warnings for gcc 4.0
42422 Signed-off-by: Matthew McClintock <msm@freescale.com>
42424 commit bf651baa365e5447246aad6a633ccd667cf24a39
42425 Author: Jon Loeliger <jdl@freescale.com>
42426 Date: Wed Oct 11 10:10:43 2006 -0500
42428 Move "ar" flags to config.mk to allow for silent "make -s"
42430 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
42431 Author: Jon Loeliger <jdl@freescale.com>
42432 Date: Tue Oct 10 17:19:03 2006 -0500
42434 Coding style changes to remove local varible blocks
42435 and reformat a bit nicer.
42437 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
42438 Author: Jon Loeliger <jdl@freescale.com>
42439 Date: Tue Oct 10 17:16:04 2006 -0500
42441 Fix whitespace issues.
42443 commit 7b382b7125f2397cce63253df62f183e3dfa2770
42444 Author: Jon Loeliger <jdl@freescale.com>
42445 Date: Tue Oct 10 17:14:45 2006 -0500
42447 Fix whitespace issues.
42449 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
42450 Author: Jon Loeliger <jdl@freescale.com>
42451 Date: Tue Oct 10 17:06:53 2006 -0500
42453 Fix whitespace issues.
42455 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
42456 Author: Jon Loeliger <jdl@freescale.com>
42457 Date: Tue Oct 10 17:03:43 2006 -0500
42459 Ran lindent and cleaned up whitespace issues.
42460 Format for 80-columns too.
42462 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
42463 Author: Jon Loeliger <jdl@freescale.com>
42464 Date: Tue Oct 10 17:02:22 2006 -0500
42466 Fix whitespace and 80-col issues.
42468 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
42469 Author: Stefan Roese <sr@denx.de>
42470 Date: Sat Oct 7 11:36:51 2006 +0200
42472 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
42473 Patch by Stefan Roese, 07 Oct 2006
42475 commit 5bc528fa4da751d472397b308137238a6465afd2
42476 Author: Stefan Roese <sr@denx.de>
42477 Date: Sat Oct 7 11:35:25 2006 +0200
42479 Update ALPR code (NAND support working now)
42480 Patch by Stefan Roese, 07 Oct 2006
42482 commit 77d5034847d328753b80c46b83f960a14a26f40e
42483 Author: Stefan Roese <sr@denx.de>
42484 Date: Sat Oct 7 11:33:03 2006 +0200
42486 Remove compile warnings in fpga code
42487 Patch by Stefan Roese, 07 Oct 2006
42489 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
42490 Author: Stefan Roese <sr@denx.de>
42491 Date: Sat Oct 7 11:30:52 2006 +0200
42493 Add CONFIG_BOARD_RESET to configure board specific reset function
42494 Patch by Stefan Roese, 07 Oct 2006
42496 commit f55df18187e7a45cb73fec4370d12135e6691ae1
42497 Author: John Traill <john.traill@freescale.com>
42498 Date: Fri Sep 29 08:23:12 2006 +0100
42500 Fix missing tCycle/modfreq calculation.
42502 Signed-off-by: John Traill <john.traill@freescale.com>
42504 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
42505 Author: Andy Fleming <afleming@freescale.com>
42506 Date: Wed Sep 13 10:33:35 2006 -0500
42508 Updated config headers to add default FDT-based booting
42510 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
42511 Author: Andy Fleming <afleming@freescale.com>
42512 Date: Wed Sep 13 10:34:18 2006 -0500
42514 Add support for eTSEC 3 & 4 on 8548 CDS
42516 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
42517 This will only work on rev 1.3 boards (but doesn't break older boards)
42518 * Cleaned up some comments to reflect the expanded role of tsec
42521 commit 084d648b109c8984f83674043c1a7fa3885ef801
42522 Author: Andy Fleming <afleming@freescale.com>
42523 Date: Wed Sep 13 10:33:56 2006 -0500
42525 Added code to support 2.6.18 PCI changes in u-boot
42527 * Added code to swizzle the IRQ map for the PCI
42529 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
42530 Author: Jon Loeliger <jdl@freescale.com>
42531 Date: Tue Sep 19 09:34:10 2006 -0500
42533 Modified makefile for new build mechanism.
42535 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42537 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
42538 Author: Jon Loeliger <jdl@freescale.com>
42539 Date: Thu Sep 14 08:40:36 2006 -0500
42541 Handle 86xx SVR values according to the new Reference Manual.
42542 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
42543 by the byte in bits 16-23 instead.
42544 Thanks to Jason Jin for noticing.
42546 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42548 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
42549 Author: Zhang Wei <wei.zhang@freescale.com>
42550 Date: Mon Aug 28 14:25:31 2006 +0800
42552 Fixed an OF-tree off-by-one bug when adding a new property name.
42553 This bug will cause the kernel booting to pause a long time.
42555 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42556 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
42558 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
42559 Author: Jon Loeliger <jdl@freescale.com>
42560 Date: Tue Aug 29 11:05:09 2006 -0500
42562 Remove trailing empty lines.
42564 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
42565 Author: Jon Loeliger <jdl@freescale.com>
42566 Date: Tue Aug 29 09:48:49 2006 -0500
42568 Remove bogus msync and use volatile asm.
42570 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
42571 Author: Jon Loeliger <jdl@freescale.com>
42572 Date: Tue Aug 29 08:17:14 2006 -0500
42574 Add myself as maintainer for MPC8641HPCN.
42576 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
42577 Author: Zhang Wei <wei.zhang@freescale.com>
42578 Date: Mon Aug 28 14:25:31 2006 +0800
42580 Fixed an OF-tree off-by-one bug when adding a new property name.
42581 This bug will cause the kernel booting to pause a long time.
42583 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42585 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
42586 Author: Haiying Wang <haiying.wang@freescale.com>
42587 Date: Fri Aug 25 14:38:34 2006 -0400
42589 Change ramdiskaddr and dtbaddr
42590 Remove PEX fluff commands.
42592 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
42593 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42595 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
42596 Author: Matthew McClintock <msm@freescale.com>
42597 Date: Wed Aug 23 13:32:45 2006 -0500
42599 * Another small fix for booting with disable_of
42601 Signed-off-by: Matthew McClintock <msm@freescale.com>
42603 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
42604 Author: Jon Loeliger <jdl@freescale.com>
42605 Date: Wed Aug 23 11:04:43 2006 -0500
42607 Cleanup and lindent new AHCI driver.
42609 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
42610 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
42611 Date: Wed Aug 23 19:15:12 2006 +0800
42613 Add AHCI define and sata support for MPC8641HPCN board.
42615 Signed-off-by:Jason Jin<jason.jin@freescale.com>
42617 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
42618 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
42619 Date: Wed Aug 23 19:10:44 2006 +0800
42621 Add AHCI support to u-boot
42623 Add AHCI support in u-boot, enable the sata disk controllers which
42624 following the AHCI protocol.
42626 Signed-off-by:Jason Jin<jason.jin@freescale.com>
42628 commit d8ea2acf5f137cae99417df4f573d036ee384668
42629 Author: Zhang Wei <wei.zhang@freescale.com>
42630 Date: Wed Aug 23 17:54:32 2006 +0800
42632 Add dtb boot-up parameter to default boot commands.
42634 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42636 commit b93775c2036b99baa390ea425c4771895bbc63c4
42637 Author: Jon Loeliger <jdl@freescale.com>
42638 Date: Tue Aug 22 18:26:08 2006 -0500
42640 Cleanup even more poorly introduced whitespace.
42642 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
42643 Author: Jon Loeliger <jdl@freescale.com>
42644 Date: Tue Aug 22 18:07:00 2006 -0500
42646 Cleanup more poorly introduced whitespace.
42648 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
42649 Author: Jon Loeliger <jdl@freescale.com>
42650 Date: Tue Aug 22 17:54:05 2006 -0500
42652 Cleanup poorly introduced whitespace.
42654 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
42655 Author: Jon Loeliger <jdl@freescale.com>
42656 Date: Tue Aug 22 12:25:27 2006 -0500
42658 General indent and whitespace cleanups.
42660 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
42661 Author: Jon Loeliger <jdl@freescale.com>
42662 Date: Tue Aug 22 12:06:18 2006 -0500
42664 General indent and whitespace cleanups.
42666 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
42667 Author: Jon Loeliger <jdl@freescale.com>
42668 Date: Tue Aug 22 10:42:21 2006 -0500
42670 Cleanup compiler warnings.
42672 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
42673 Author: Matthew McClintock <msm@freescale.com>
42674 Date: Tue Aug 22 09:31:59 2006 -0500
42676 Fix disable_of booting
42678 Signed-off-by: Matthew McClintock <msm@freescale.com>
42680 commit 87a449c8ac396420cb24260f717ea9e6faa82047
42681 Author: Matthew McClintock <msm@freescale.com>
42682 Date: Tue Aug 22 09:23:55 2006 -0500
42684 Support for FDT in uImage format, error when using FDT from flash
42686 Signed-off-by: Matthew McClintock <msm@freescale.com>
42688 commit 75c299c38369d01addd5e054b8a16217b70f4a86
42689 Author: Haiying Wang <haiying.wang@freescale.com>
42690 Date: Tue Aug 15 15:12:55 2006 -0400
42692 Unlock cache before kernel starts up for MPC86xx
42694 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
42695 Author: Haiying Wang <haiying.wang@freescale.com>
42696 Date: Tue Aug 15 15:13:15 2006 -0400
42698 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
42700 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
42701 Author: Haiying Wang <haiying.wang@freescale.com>
42702 Date: Tue Aug 15 15:12:55 2006 -0400
42704 Unlock cache before kernel starts up for MPC86xx
42706 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
42707 Author: Haiying Wang <haiying.wang@freescale.com>
42708 Date: Tue Aug 15 15:13:15 2006 -0400
42710 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
42712 commit 86c8e17f25e972a7e272950a0735fad84e082b88
42713 Author: Matthew McClintock <msm@freescale.com>
42714 Date: Wed Aug 16 13:59:47 2006 -0500
42716 * Fix disable_of booting
42718 Signed-off-by: Matthew McClintock <msm@freescale.com>
42720 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
42721 Author: Matthew McClintock <msm@freescale.com>
42722 Date: Wed Aug 16 10:54:09 2006 -0500
42724 * Support for FDT in uImage format, error when using FDT from flash
42726 Signed-off-by: Matthew McClintock <msm@freescale.com>
42728 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
42729 Author: Stefan Roese <sr@denx.de>
42730 Date: Tue Aug 15 14:22:35 2006 +0200
42732 Add initial support for the ALPR board from Prodrive
42733 NAND needs some additional testing
42734 Patch by Heiko Schocher, 15 Aug 2006
42736 commit f0ff4692ff3372dec55074a8eb444943ab095abb
42737 Author: Stefan Roese <sr@denx.de>
42738 Date: Tue Aug 15 14:15:51 2006 +0200
42740 Add FPGA Altera Cyclone 2 support
42741 Patch by Heiko Schocher, 15 Aug 2006
42743 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
42744 Author: Jon Loeliger <jdl@freescale.com>
42745 Date: Mon Aug 14 15:33:38 2006 -0500
42747 Fix BAT0 to actually be cacheable, non-guarded as documented.
42749 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42751 commit 40bc83559db5745681909fd7382ae509567e116d
42752 Author: Jon Loeliger <jdl@freescale.com>
42753 Date: Wed Aug 9 15:32:16 2006 -0500
42755 Removed MPC8641HPCN DTS source file from build.
42756 It is no longer linked into U-Boot; its sources are
42757 now located in the kernel tree.
42759 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42761 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
42762 Author: Matthew McClintock <msm@freescale.com>
42763 Date: Wed Jun 28 10:47:03 2006 -0500
42765 * Switched default PCI speed for 8540 ADS back to 33MHz
42767 * Added comments and a printf to warn that PCI-X won't
42769 Patch by Andy Fleming 17-Mar-2006
42771 Signed-off-by: Andy Fleming <afleming@freescale.com>
42773 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
42774 Author: Matthew McClintock <msm@freescale.com>
42775 Date: Wed Jun 28 10:46:35 2006 -0500
42777 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
42779 Signed-off-by: Andy Fleming <afleming@freescale.com>
42781 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
42782 Author: Matthew McClintock <msm@freescale.com>
42783 Date: Wed Jun 28 10:46:13 2006 -0500
42785 * Added VIA configuration table
42787 * Added support for PCI2 on CDS
42788 Patch by Andy Fleming 17-Mar-2006
42790 Signed-off-by: Andy Fleming <afleming@freescale.com>
42792 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
42793 Author: Matthew McClintock <msm@freescale.com>
42794 Date: Wed Jun 28 10:45:41 2006 -0500
42796 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
42798 Signed-off-by: Andy Fleming <afleming@freescale.com>
42800 commit 97074ed9655309b64231bc2cee69fe85399f8055
42801 Author: Matthew McClintock <msm@freescale.com>
42802 Date: Wed Jun 28 10:45:17 2006 -0500
42804 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
42806 Signed-off-by: Andy Fleming <afleming@freescale.com>
42808 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
42809 Author: Matthew McClintock <msm@freescale.com>
42810 Date: Wed Jun 28 10:44:49 2006 -0500
42812 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
42814 Signed-off-by: Andy Fleming <afleming@freescale.com>
42816 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
42817 Author: Matthew McClintock <msm@freescale.com>
42818 Date: Wed Jun 28 10:44:23 2006 -0500
42820 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
42822 Signed-off-by: Andy Fleming <afleming@freescale.com>
42824 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
42825 Author: Matthew McClintock <msm@freescale.com>
42826 Date: Wed Jun 28 10:43:36 2006 -0500
42828 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
42830 Signed-off-by: Jon Loeliger <jdl@freescale.com>
42832 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
42833 Author: Matthew McClintock <msm@freescale.com>
42834 Date: Wed Jun 28 10:43:00 2006 -0500
42836 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
42838 commit 5498d90312aad9f6bdbf047986027c35b03cd163
42839 Author: Matthew McClintock <msm@freescale.com>
42840 Date: Wed Jun 28 10:42:24 2006 -0500
42842 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
42844 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
42845 Author: Matthew McClintock <msm@freescale.com>
42846 Date: Wed Jun 28 10:41:37 2006 -0500
42848 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
42850 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
42851 Author: John Traill <john.traill@freescale.com>
42852 Date: Wed Aug 9 14:33:50 2006 +0100
42854 Add Rapidio support for the MPC8641HPCN
42856 Signed-off-by: John Traill <john.traill@freescale.com>
42858 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
42859 Author: John Traill <john.traill@freescale.com>
42860 Date: Tue Aug 8 11:32:43 2006 +0100
42862 Fix caslat calculation
42864 Signed-off-by: John Traill <john.traill@freescale.com>
42866 commit 709d3073e74153278e7904a70819bbef7df50e1a
42867 Author: Jon Loeliger <jdl@freescale.com>
42868 Date: Thu Aug 3 16:17:56 2006 -0500
42870 Convert to mac-address in ethernet nodes.
42872 commit 71748af833ca1017edf1415be376366ff2937d17
42873 Author: Haiying Wang <haiying.wang@freescale.com>
42874 Date: Fri Jul 28 12:41:35 2006 -0400
42876 Correct the irq value of DUART2
42878 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
42879 Author: Haiying Wang <haiying.wang@freescale.com>
42880 Date: Fri Jul 28 12:41:41 2006 -0400
42882 Change the space size of PEX IO in README
42884 commit 239db37c94f7a92941c4465feceb867c609241c5
42885 Author: Haiying Wang <haiying.wang@freescale.com>
42886 Date: Fri Jul 28 12:41:18 2006 -0400
42888 Move get_board_sys_clk to board directory
42890 commit 492900b985439fbce1a118afde1e35def870db03
42891 Author: John Traill <john.traill@freescale.com>
42892 Date: Fri Jul 28 09:03:54 2006 +0100
42894 Fix 8641HPCN pollution
42896 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
42897 Author: John Traill <john.traill@freescale.com>
42898 Date: Fri Jul 28 08:16:06 2006 +0100
42900 Fix 8641HPCN timebase
42902 commit c86360b830f1eecd7a72208575dde4f57879faea
42903 Author: Zhang Wei <wei.zhang@freescale.com>
42904 Date: Fri Jul 28 00:01:34 2006 +0800
42906 Fixed OF device tree of mpc86xxhpcn board.
42908 The changes works in with kernel irq mapping rework.
42910 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
42912 commit bea3f28d285942bf3f7ab339ce85178ded544225
42913 Author: Haiying Wang <haiying.wang@freescale.com>
42914 Date: Wed Jul 12 10:48:05 2006 -0400
42916 Add support for reading and writing mac addresses to or from ID EEPROM.
42918 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
42919 With attached patch, we can use command "mac/mac read/mac save/"
42920 to read and write EEPROM under u-boot prompt.
42922 U-boot will calculate the checksum of EEPROM while bootup,
42923 if it is right, then u-boot will check whether the mac address
42924 of eTSEC0/1/2/3 is availalbe (non-zero).
42926 If there is mac address availabe in EEPROM, u-boot will use it,
42927 otherewise, u-boot will use the mac address defined in
42928 MPC8641HPCN.h. This matches the requirement to set unique mac address
42929 for each TSEC port.
42931 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
42932 Signed-off-by: York Sun <yorksun@freescale.com>
42934 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
42935 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
42936 Date: Thu Jul 13 10:35:10 2006 -0500
42938 Fixed initrd issue by define big RAM
42940 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
42942 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
42943 Author: Jason Jin <Jason.jin@freescale.com>
42944 Date: Fri Jul 7 10:01:45 2006 -0500
42946 We made a u-boot patch to fix the hang up issue
42947 when booting filesystem from ramdisk.
42949 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
42951 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
42952 Author: Matthew McClintock <msm@freescale.com>
42953 Date: Wed Jun 28 10:47:03 2006 -0500
42955 * Switched default PCI speed for 8540 ADS back to 33MHz
42956 * Added comments and a printf to warn that PCI-X won't
42958 Patch by Andy Fleming 17-Mar-2006
42960 Signed-off-by: Andy Fleming <afleming@freescale.com>
42962 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
42963 Author: Matthew McClintock <msm@freescale.com>
42964 Date: Wed Jun 28 10:46:35 2006 -0500
42966 * Fixed a bug where 8555 PCI code used the old variable and
42968 Patch by Andy Fleming 17-Mar-2006
42970 Signed-off-by: Andy Fleming <afleming@freescale.com>
42972 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
42973 Author: Matthew McClintock <msm@freescale.com>
42974 Date: Wed Jun 28 10:46:13 2006 -0500
42976 * Added VIA configuration table
42977 * Added support for PCI2 on CDS
42978 Patch by Andy Fleming 17-Mar-2006
42980 Signed-off-by: Andy Fleming <afleming@freescale.com>
42982 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
42983 Author: Matthew McClintock <msm@freescale.com>
42984 Date: Wed Jun 28 10:45:41 2006 -0500
42986 * Fixed PCI memory definitions
42987 Patch by Andy Fleming 17-Mar-2006
42989 Signed-off-by: Andy Fleming <afleming@freescale.com>
42991 commit 087454609e47295443af793a282cddcd91a5f49c
42992 Author: Matthew McClintock <msm@freescale.com>
42993 Date: Wed Jun 28 10:45:17 2006 -0500
42995 * Added support for initializing second PCI bus on 85xx
42996 Patch by Andy Fleming 17-Mar-2006
42998 Signed-off-by: Andy Fleming <afleming@freescale.com>
43000 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
43001 Author: Matthew McClintock <msm@freescale.com>
43002 Date: Wed Jun 28 10:44:49 2006 -0500
43004 * Added PCI-X #defines for PCI-X initialization
43005 Patch by Andy Fleming on 17-Mar-2006
43007 Signed-off-by: Andy Fleming <afleming@freescale.com>
43009 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
43010 Author: Matthew McClintock <msm@freescale.com>
43011 Date: Wed Jun 28 10:44:23 2006 -0500
43013 * Made sure the code which disables prefetch for PCI devices
43014 sets the size of the prefetch region to 0
43015 Patch by Andy Fleming on 17-Mar-2006
43017 Signed-off-by: Andy Fleming <afleming@freescale.com>
43019 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
43020 Author: Matthew McClintock <msm@freescale.com>
43021 Date: Wed Jun 28 10:43:36 2006 -0500
43023 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
43024 Patch by Jon Loeliger 17-Jan-2006
43026 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43028 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
43029 Author: Matthew McClintock <msm@freescale.com>
43030 Date: Wed Jun 28 10:43:00 2006 -0500
43032 * Removed the oftree.dts for stxxtx in light of the changes
43033 to the flat device tree handling code
43034 Patch by Matthew McClintock 26-June-2006
43036 commit 1b380ec225665e73959677f3893dc658c5925e05
43037 Author: Matthew McClintock <msm@freescale.com>
43038 Date: Wed Jun 28 10:42:24 2006 -0500
43040 * Patch to modify ft_build.c to update flat device trees in place
43041 Patch by Matthew McClintock 26-June-2006
43043 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
43044 Author: Matthew McClintock <msm@freescale.com>
43045 Date: Wed Jun 28 10:41:37 2006 -0500
43047 * Modify bootm command to support booting with flat device trees
43048 Patch by Matthew McClintock 26-June-2006
43050 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
43051 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
43052 Date: Wed Jun 28 08:43:56 2006 -0500
43054 Change Id to symbolic name for RTL8139
43056 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43058 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
43059 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43060 Date: Tue Jun 27 18:12:10 2006 +0800
43062 Fix RTL8139 in big endian
43064 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
43065 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
43067 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
43068 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43069 Date: Tue Jun 27 18:12:23 2006 +0800
43071 Fix Tsec bug when no link
43073 When tftp a non-exist file from the tftp server, u-boot will check
43074 the link of all eth port. The original file will return wrong link
43075 state on the no link ports.
43077 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
43079 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
43080 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43081 Date: Tue Jun 27 18:12:02 2006 +0800
43083 Fix bug for io_bar size during pci scan
43085 During the pci scan process, Some devices return bar_reponse with the
43086 highest bytes 0, such as the pci bridge in uli1575 return bar_response
43087 with 0xffffff, So the bar_size should be manually set under 64K.
43089 Signed-off-by: Jason Jin <jason.jin@freescale.com>
43091 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
43092 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
43093 Date: Tue Jun 27 18:11:54 2006 +0800
43095 Enable PCIE1 for MPC8641HPCN board
43097 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
43099 commit 99d70e3a47affb9bae041a2caece7cd516e213b3
43100 Author: Wolfgang Denk <wd@pollux.denx.de>
43101 Date: Mon Jun 26 11:06:00 2006 +0200
43105 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
43106 Author: Jon Loeliger <jdl@freescale.com>
43107 Date: Thu Jun 22 08:51:46 2006 -0500
43109 Fix bug in 8641hpcn reset command with no args.
43111 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
43112 Acked-by: Jon Loeliger <jdl@freescale.com>
43114 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
43115 Author: Zhang Wei <wei.zhang@freescale.com>
43116 Date: Tue Jun 20 17:47:15 2006 +0800
43118 Reworked IRQ mapping in OF-tree.
43120 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
43121 Author: Jon Loeliger <jdl@freescale.com>
43122 Date: Thu Jun 15 21:33:37 2006 -0500
43124 Do not enable address translation on secondary CPUs.
43125 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
43127 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43129 commit 386eda022473394ad8f36b86f2bdc9b4cb816291
43130 Author: Wolfgang Denk <wd@pollux.denx.de>
43131 Date: Wed Jun 14 18:14:56 2006 +0200
43135 commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
43136 Author: Wolfgang Denk <wd@pollux.denx.de>
43137 Date: Wed Jun 14 17:45:53 2006 +0200
43139 Various USB related patches
43140 - Add support for mpc8xx USB device.
43141 - Add support for Common Device Class - Abstract Control Model USB console.
43142 - Add support for flow control in USB slave devices.
43143 - Add support for switching between gserial and cdc_acm using environment.
43144 - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
43145 - Update usbcore slightly to ease host enumeration.
43146 - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
43147 - Add AdderUSB_config as a defconfig to enable usage of the USB console
43148 by default with the Adder87x U-Boot port.
43149 Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
43151 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
43152 Author: Jon Loeliger <jdl@jdl.com>
43153 Date: Wed Jun 7 10:53:55 2006 -0500
43155 Fix a get_board_sys_clk() use-before-def warning.
43157 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43159 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
43160 Author: Jon Loeliger <jdl@jdl.com>
43161 Date: Wed Jun 7 10:52:49 2006 -0500
43163 Allow DTC path to be passed in.
43165 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43167 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
43168 Author: Haiying Wang <haiying.wang@freescale.com>
43169 Date: Tue Jun 6 16:54:29 2006 -0400
43171 Modify the IRQ of DUART2
43173 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
43174 Author: Jon Loeliger <jdl@jdl.com>
43175 Date: Wed May 31 13:55:35 2006 -0500
43179 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43181 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
43182 Author: Jon Loeliger <jdl@jdl.com>
43183 Date: Wed May 31 12:44:44 2006 -0500
43185 White space cleanup.
43186 Some 80-column cleanups.
43187 Convert printf() to puts() where possible.
43188 Use #include "spd_sdram.h" as needed.
43189 Enhanced reset command usage message a bit.
43191 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43193 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
43194 Author: Jon Loeliger <jdl@jdl.com>
43195 Date: Wed May 31 11:39:34 2006 -0500
43197 Removed unneeded local_bus_init() from 8641HPCN board.
43199 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43201 commit 4d3d729c16c392d2982d3266b659d333c927697d
43202 Author: Jon Loeliger <jdl@jdl.com>
43203 Date: Wed May 31 11:24:28 2006 -0500
43205 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
43207 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43209 commit b2a941de060350ad15878d8219825f4950e9bb8e
43210 Author: Jon Loeliger <jdl@jdl.com>
43211 Date: Wed May 31 10:07:28 2006 -0500
43213 Remove dead debug code.
43215 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43217 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
43218 Author: Jon Loeliger <jdl@freescale.com>
43219 Date: Tue May 30 17:47:00 2006 -0500
43221 Move mpc86xx PIXIS code to board directory
43223 First cut at moving the PIXIS platform code out of
43224 the 86xx cpu directory and into board/mpc8641hpcn
43227 Signed-off-by: Jon Loeliger <jdl@freescale.com>
43229 commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
43230 Author: Markus Klotzbuecher <mk@denx.de>
43231 Date: Tue May 30 16:56:14 2006 +0200
43233 Support generic OHCI support for the s3c24x0 cpu.
43235 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
43236 Author: Haiying Wang <Haiying.Wang@freescale.com>
43237 Date: Tue May 30 09:10:32 2006 -0500
43239 Improve "reset" command's interaction with watchdog.
43241 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
43242 "reset altbank wd" will reset another bank WITH watch dog enabled
43243 "diswd" will disable watch dog after u-boot boots up successfully
43245 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43247 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
43248 Author: Haiying Wang <Haiying.Wang@freescale.com>
43249 Date: Tue May 30 08:51:19 2006 -0500
43251 Fix two SDRAM setup bugs.
43254 Enable 1T/2T based on number of DIMMs present.
43256 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43258 commit d11fec5015334deb2010e36ce00bb118cc5429a5
43259 Author: Haiying Wang <Haiying.Wang@freescale.com>
43260 Date: Fri May 26 10:24:48 2006 -0500
43262 Add first draft of the MPC8641HPCN doc/README.
43264 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43266 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
43267 Author: Haiying Wang <Haiying.Wang@freescale.com>
43268 Date: Fri May 26 10:13:04 2006 -0500
43270 Added pci@8000 block.
43271 Updated ethernet interrupt mappings (moved up 48).
43272 Cleaned up a few comments.
43274 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43276 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
43277 Author: Haiying Wang <Haiying.Wang@freescale.com>
43278 Date: Fri May 26 10:01:16 2006 -0500
43280 Allow args on reset command.
43282 Signed-off-by: Jon Loeliger <jdl@jdl.com>
43284 commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
43285 Author: Markus Klotzbuecher <mk@denx.de>
43286 Date: Tue May 23 13:38:35 2006 +0200
43288 Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
43289 fixes to the latter.
43291 commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
43292 Author: Markus Klotzbuecher <mk@denx.de>
43293 Date: Tue May 23 10:33:11 2006 +0200
43295 More cleanup for the delta board and the generic usb_ohci driver. Added
43296 CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
43297 initialization and cleanup hooks respectively.
43299 commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
43300 Author: Markus Klotzbuecher <mk@denx.de>
43301 Date: Mon May 22 16:33:54 2006 +0200
43303 This patch adds USB storage support for the delta board. This is the first
43304 board to make use of a generic OHCI driver, that calls hooks for board
43305 dependant initialization.
43307 commit 14e37081ff3cac7ebe6e93836523429853b6b292
43308 Author: Jon Loeliger <jdl@jdl.com>
43309 Date: Fri May 19 13:28:39 2006 -0500
43311 Change arbitration to round-robin for SMP linux.
43313 commit 9a655876e5995be80f49054e2509500e871e4d3a
43314 Author: Jon Loeliger <jdl@jdl.com>
43315 Date: Fri May 19 13:26:34 2006 -0500
43317 Enable dual DDR controllers and interleaving.
43319 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
43320 Author: Jon Loeliger <jdl@jdl.com>
43321 Date: Fri May 19 13:22:44 2006 -0500
43323 Update 86xx address map and LAWBARs.
43325 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
43326 Author: Jon Loeliger <jdl@jdl.com>
43327 Date: Fri May 19 13:14:15 2006 -0500
43329 Remove L2 Cache invalidate polling.
43331 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
43332 Author: Jon Loeliger <jdl@jdl.com>
43333 Date: Fri May 19 12:33:09 2006 -0500
43335 Enable 2nd CPU and I2C.
43337 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
43338 Author: Jon Loeliger <jdl@freescale.com>
43339 Date: Mon May 15 07:26:56 2006 -0500
43341 Update interrupt mapping.
43343 commit 6cfea33477b04b63ed47386ed1629529484c33ba
43344 Author: Haiying Wang <Haiying.Wang@freescale.com>
43345 Date: Wed May 10 09:38:06 2006 -0500
43347 Remove unneeded INIT_RAM_LOCK cache twiddling.
43348 Correctly tracks r29 as global data pointer now.
43350 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
43352 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
43353 Author: Jon Loeliger <jdl@freescale.com>
43354 Date: Wed May 10 09:33:07 2006 -0500
43356 Remove unnecessary flash.c file.
43358 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
43359 Author: Jon Loeliger <jdl@freescale.com>
43360 Date: Tue May 9 08:23:49 2006 -0500
43362 Get MPC8641HPCN flash images working.
43364 Enable the CFI driver.
43365 Remove bogus LAWBAR7 cruft.
43366 Use correct TEXT_BASE, Fixup load script.
43367 Enable SPD EEPROM during DDR setup.
43368 Use generic RFC 1918 IP addresses by default.
43370 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
43371 Author: Jon Loeliger <jdl@freescale.com>
43372 Date: Thu Apr 27 10:15:16 2006 -0500
43374 Cleanup whitespaces and style issues.
43375 Removed //-style comments.
43376 Use 80-column lines.
43377 Remove trailing whitespace.
43378 Remove dead code and debug cruft.
43380 commit a2320a6bf8113a09544c42d160d10ac69d049a03
43381 Author: Jon Loeliger <jdl@freescale.com>
43382 Date: Thu Apr 27 08:22:39 2006 -0500
43384 Revert bad PCI prefetch limit change.
43386 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
43387 Author: Jon Loeliger <jdl@freescale.com>
43388 Date: Wed Apr 26 17:58:56 2006 -0500
43390 Initial support for MPC8641 HPCN board.