2 # For a description of the syntax of this configuration file,
3 # see the file Documentation/kbuild/kconfig-language.txt in the
4 # Linux kernel source tree.
6 mainmenu "U-Boot $UBOOTVERSION Configuration"
10 option env="UBOOTVERSION"
12 # Allow defaults in arch-specific code to override any given here
20 This option cannot be enabled. It is used as dependency
21 for broken and incomplete features.
24 string "Local version - append to U-Boot release"
26 Append an extra string to the end of your U-Boot version.
27 This will show up in your boot log, for example.
28 The string you set here will be appended after the contents of
29 any files with a filename matching localversion* in your
30 object and source tree, in that order. Your total string can
31 be a maximum of 64 characters.
33 config LOCALVERSION_AUTO
34 bool "Automatically append version information to the version string"
37 This will try to automatically determine if the current tree is a
38 release tree by looking for Git tags that belong to the current
41 A string of the format -gxxxxxxxx will be added to the localversion
42 if a Git-based tree is found. The string generated by this will be
43 appended after any matching localversion* files, and after the value
44 set in CONFIG_LOCALVERSION.
46 (The actual string used here is the first eight characters produced
47 by running the command:
49 $ git rev-parse --verify HEAD
51 which is done within the script "scripts/setlocalversion".)
53 config CC_OPTIMIZE_FOR_SIZE
54 bool "Optimize for size"
57 Enabling this option will pass "-Os" instead of "-O2" to gcc
58 resulting in a smaller U-Boot image.
60 This option is enabled by default for U-Boot.
63 bool "Enable code coverage analysis"
66 Enabling this option will pass "--coverage" to gcc to compile
67 and link code instrumented for coverage analysis.
69 config DISTRO_DEFAULTS
70 bool "Select defaults suitable for booting general purpose Linux distributions"
72 select CMD_BOOTZ if ARM && !ARM64
73 select CMD_BOOTI if ARM64
74 select CMD_DHCP if CMD_NET
75 select CMD_PING if CMD_NET
83 select CMD_PART if PARTITIONS
85 select CMDLINE_EDITING
88 select SUPPORT_RAW_INITRD
89 select ENV_VARS_UBOOT_CONFIG
91 Select this to enable various options and commands which are suitable
92 for building u-boot for booting general purpose Linux distributions.
94 config ENV_VARS_UBOOT_CONFIG
95 bool "Add arch, board, vendor and soc variables to default environment"
97 Define this in order to add variables describing the
98 U-Boot build configuration to the default environment.
99 These will be named arch, cpu, board, vendor, and soc.
100 Enabling this option will cause the following to be defined:
107 config SYS_BOOT_GET_CMDLINE
108 bool "Enable kernel command line setup"
110 Enables allocating and saving kernel cmdline in space between
111 "bootm_low" and "bootm_low" + BOOTMAPSZ.
113 config SYS_BOOT_GET_KBD
114 bool "Enable kernel board information setup"
116 Enables allocating and saving a kernel copy of the bd_info in
117 space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
120 bool "Enable malloc() pool before relocation"
123 Before relocation, memory is very limited on many platforms. Still,
124 we can provide a small malloc() pool if needed. Driver model in
125 particular needs this to operate, so that it can allocate the
126 initial serial device and any others that are needed.
128 config SYS_MALLOC_F_LEN
129 hex "Size of malloc() pool before relocation"
130 depends on SYS_MALLOC_F
131 default 0x1000 if AM33XX
134 Before relocation, memory is very limited on many platforms. Still,
135 we can provide a small malloc() pool if needed. Driver model in
136 particular needs this to operate, so that it can allocate the
137 initial serial device and any others that are needed.
139 config SPL_SYS_MALLOC_F_LEN
140 hex "Size of malloc() pool in SPL before relocation"
141 depends on SYS_MALLOC_F
142 default SYS_MALLOC_F_LEN
144 Before relocation, memory is very limited on many platforms. Still,
145 we can provide a small malloc() pool if needed. Driver model in
146 particular needs this to operate, so that it can allocate the
147 initial serial device and any others that are needed.
149 config TPL_SYS_MALLOC_F_LEN
150 hex "Size of malloc() pool in TPL before relocation"
151 depends on SYS_MALLOC_F
152 default SYS_MALLOC_F_LEN
154 Before relocation, memory is very limited on many platforms. Still,
155 we can provide a small malloc() pool if needed. Driver model in
156 particular needs this to operate, so that it can allocate the
157 initial serial device and any others that are needed.
160 bool "Configure standard U-Boot features (expert users)"
163 This option allows certain base U-Boot options and settings
164 to be disabled or tweaked. This is for specialized
165 environments which can tolerate a "non-standard" U-Boot.
166 Use this only if you really know what you are doing.
169 config SYS_MALLOC_CLEAR_ON_INIT
170 bool "Init with zeros the memory reserved for malloc (slow)"
173 This setting is enabled by default. The reserved malloc
174 memory is initialized with zeros, so first malloc calls
175 will return the pointer to the zeroed memory. But this
178 It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
179 value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
180 Then the boot time can be significantly reduced.
182 When disabling this, please check if malloc calls, maybe
183 should be replaced by calloc - if one expects zeroed memory.
186 bool "Enable debug information for tools"
188 Enable generation of debug information for tools such as mkimage.
189 This can be used for debugging purposes. With debug information
190 it is possible to set breakpoints on particular lines, single-step
191 debug through the source code, etc.
196 bool "64bit physical address support"
198 Say Y here to support 64bit physical memory address.
199 This can be used not only for 64bit SoCs, but also for
200 large physical address extention on 32bit SoCs.
203 bool "Build U-Boot as BIOS replacement"
206 This option allows to build a ROM version of U-Boot.
207 The build process generally requires several binary blobs
208 which are not shipped in the U-Boot source tree.
209 Please, see doc/README.x86 for details.
211 endmenu # General setup
215 config ANDROID_BOOT_IMAGE
216 bool "Enable support for Android Boot Images"
217 default y if FASTBOOT
219 This enables support for booting images which use the Android
223 bool "Support Flattened Image Tree"
227 This option allows you to boot the new uImage structure,
228 Flattened Image Tree. FIT is formally a FDT, which can include
229 images of various types (kernel, FDT blob, ramdisk, etc.)
230 in a single blob. To boot this new uImage structure,
231 pass the address of the blob to the "bootm" command.
232 FIT is very flexible, supporting compression, multiple images,
233 multiple configurations, verification through hashing and also
234 verified boot (secure boot using RSA).
238 config FIT_ENABLE_SHA256_SUPPORT
239 bool "Support SHA256 checksum of FIT image contents"
243 Enable this to support SHA256 checksum of FIT image contents. A
244 SHA256 checksum is a 256-bit (32-byte) hash value used to check that
245 the image contents have not been corrupted. SHA256 is recommended
246 for use in secure applications since (as at 2016) there is no known
247 feasible attack that could produce a 'collision' with differing
248 input data. Use this for the highest security. Note that only the
249 SHA256 variant is supported: SHA512 and others are not currently
253 bool "Enable signature verification of FIT uImages"
257 This option enables signature verification of FIT uImages,
258 using a hash signed and verified using RSA. If
259 CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
260 hashing is available using hardware, then the RSA library will use
261 it. See doc/uImage.FIT/signature.txt for more details.
263 WARNING: When relying on signed FIT images with a required signature
264 check the legacy image format is disabled by default, so that
265 unsigned images cannot be loaded. If a board needs the legacy image
266 format support in this case, enable it using
267 CONFIG_IMAGE_FORMAT_LEGACY.
270 bool "Show verbose messages when FIT images fail"
272 Generally a system will have valid FIT images so debug messages
273 are a waste of code space. If you are debugging your images then
274 you can enable this option to get more verbose information about
277 config FIT_BEST_MATCH
278 bool "Select the best match for the kernel device tree"
280 When no configuration is explicitly selected, default to the
281 one whose fdt's compatibility field best matches that of
282 U-Boot itself. A match is considered "best" if it matches the
283 most specific compatibility entry of U-Boot's fdt's root node.
284 The order of entries in the configuration's fdt is ignored.
286 config FIT_IMAGE_POST_PROCESS
287 bool "Enable post-processing of FIT artifacts after loading by U-Boot"
288 depends on TI_SECURE_DEVICE
290 Allows doing any sort of manipulation to blobs after they got extracted
291 from FIT images like stripping off headers or modifying the size of the
292 blob, verification, authentication, decryption etc. in a platform or
293 board specific way. In order to use this feature a platform or board-
294 specific implementation of board_fit_image_post_process() must be
295 provided. Also, anything done during this post-processing step would
296 need to be comprehended in how the images were prepared before being
297 injected into the FIT creation (i.e. the blobs would have been pre-
298 processed before being added to the FIT image).
303 bool "Support Flattened Image Tree within SPL"
307 config SPL_FIT_SIGNATURE
308 bool "Enable signature verification of FIT firmware within SPL"
314 bool "Enable SPL loading U-Boot as a FIT"
317 Normally with the SPL framework a legacy image is generated as part
318 of the build. This contains U-Boot along with information as to
319 where it should be loaded. This option instead enables generation
320 of a FIT (Flat Image Tree) which provides more flexibility. In
321 particular it can handle selecting from multiple device tree
322 and passing the correct one to U-Boot.
324 config SPL_FIT_IMAGE_POST_PROCESS
325 bool "Enable post-processing of FIT artifacts after loading by the SPL"
326 depends on SPL_LOAD_FIT
328 Allows doing any sort of manipulation to blobs after they got extracted
329 from the U-Boot FIT image like stripping off headers or modifying the
330 size of the blob, verification, authentication, decryption etc. in a
331 platform or board specific way. In order to use this feature a platform
332 or board-specific implementation of board_fit_image_post_process() must
333 be provided. Also, anything done during this post-processing step would
334 need to be comprehended in how the images were prepared before being
335 injected into the FIT creation (i.e. the blobs would have been pre-
336 processed before being added to the FIT image).
338 config SPL_FIT_SOURCE
339 string ".its source file for U-Boot FIT image"
342 Specifies a (platform specific) FIT source file to generate the
343 U-Boot FIT image. This could specify further image to load and/or
346 config SPL_FIT_GENERATOR
347 string ".its file generator script for U-Boot FIT image"
349 default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
351 Specifies a (platform specific) script file to generate the FIT
352 source file used to build the U-Boot FIT image file. This gets
353 passed a list of supported device tree file stub names to
354 include in the generated image.
360 config IMAGE_FORMAT_LEGACY
361 bool "Enable support for the legacy image format"
362 default y if !FIT_SIGNATURE
364 This option enables the legacy image format. It is enabled by
365 default for backward compatibility, unless FIT_SIGNATURE is
366 set where it is disabled so that unsigned images cannot be
367 loaded. If a board needs the legacy image format support in this
368 case, enable it here.
370 config OF_BOARD_SETUP
371 bool "Set up board-specific details in device tree before boot"
374 This causes U-Boot to call ft_board_setup() before booting into
375 the Operating System. This function can set up various
376 board-specific information in the device tree for use by the OS.
377 The device tree is then passed to the OS.
379 config OF_SYSTEM_SETUP
380 bool "Set up system-specific details in device tree before boot"
383 This causes U-Boot to call ft_system_setup() before booting into
384 the Operating System. This function can set up various
385 system-specific information in the device tree for use by the OS.
386 The device tree is then passed to the OS.
388 config OF_STDOUT_VIA_ALIAS
389 bool "Update the device-tree stdout alias from U-Boot"
392 This uses U-Boot's serial alias from the aliases node to update
393 the device tree passed to the OS. The "linux,stdout-path" property
394 in the chosen node is set to point to the correct serial node.
395 This option currently references CONFIG_CONS_INDEX, which is
396 incorrect when used with device tree as this option does not
397 exist / should not be used.
399 config SYS_EXTRA_OPTIONS
400 string "Extra Options (DEPRECATED)"
402 The old configuration infrastructure (= mkconfig + boards.cfg)
403 provided the extra options field. If you have something like
404 "HAS_BAR,BAZ=64", the optional options
406 #define CONFIG_BAZ 64
407 will be defined in include/config.h.
408 This option was prepared for the smooth migration from the old
409 configuration to Kconfig. Since this option will be removed sometime,
410 new boards should not use this option.
413 depends on !NIOS2 && !XTENSA
415 default 0x80800000 if ARCH_OMAP2PLUS
416 default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
417 default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
418 default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
421 The address in memory that U-Boot will be running from, initially.
426 depends on ARC || ARCH_SUNXI
427 int "CPU clock frequency"
429 TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
431 config ARCH_FIXUP_FDT_MEMORY
432 bool "Enable arch_fixup_memory_banks() call"
435 Enable FDT memory map syncup before OS boot. This feature can be
436 used for booting OS with different memory setup where the part of
437 the memory location should be used for different purpose.
439 endmenu # Boot images
443 source "common/Kconfig"
447 source "disk/Kconfig"
455 source "drivers/Kconfig"
461 source "test/Kconfig"