git.sur5r.net Git - u-boot/blob - MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5
   6 usage()
   7 {
   8         # if exiting with 0, write to stdout, else write to stderr
   9         local ret=${1:-0}
  10         [ "${ret}" -eq 1 ] && exec 1>&2
  11         cat <<-EOF
  12         Usage: MAKEALL [options] [--] [boards-to-build]
  13
  14         Options:
  15           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  16           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  17           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  18           -s SOC,    --soc SOC         Build all boards with soc SOC
  19           -l,        --list            List all targets to be built
  20           -m,        --maintainers     List all targets and maintainer email
  21           -M,        --mails           List all targets and all affilated emails
  22           -C,        --check           Enable build checking
  23           -n,        --continue        Continue (skip boards already built)
  24           -r,        --rebuild-errors  Rebuild any boards that errored
  25           -h,        --help            This help output
  26
  27         Selections by these options are logically ANDed; if the same option
  28         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  29         will select all configurations where the vendor is either FOO or
  30         BAR.  Any additional arguments specified on the command line are
  31         always build additionally.  See the boards.cfg file for more info.
  32
  33         If no boards are specified, then the default is "powerpc".
  34
  35         Environment variables:
  36           BUILD_NCPUS      number of parallel make jobs (default: auto)
  37           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  38           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  39                            architecture "ARCH".  Substitute "ARCH" for any
  40                            supported architecture (default: "")
  41           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  42           BUILD_DIR        output build directory (default: ./)
  43           BUILD_NBUILDS    number of parallel targets (default: 1)
  44
  45         Examples:
  46           - build all Power Architecture boards:
  47               MAKEALL -a powerpc
  48               MAKEALL --arch powerpc
  49               MAKEALL powerpc
  50           - build all PowerPC boards manufactured by vendor "esd":
  51               MAKEALL -a powerpc -v esd
  52           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  53               MAKEALL -a powerpc -v keymile -v siemens
  54           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  55               MAKEALL -c mpc83xx -v freescale 4xx
  56         EOF
  57         exit ${ret}
  58 }
  59
  60 SHORT_OPTS="ha:c:v:s:lmMCnr"
  61 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
  62
  63 # Option processing based on util-linux-2.13/getopt-parse.bash
  64
  65 # Note that we use `"$@"' to let each command-line parameter expand to a
  66 # separate word. The quotes around `$@' are essential!
  67 # We need TEMP as the `eval set --' would nuke the return value of
  68 # getopt.
  69 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  70      -n 'MAKEALL' -- "$@"`
  71
  72 [ $? != 0 ] && usage 1
  73
  74 # Note the quotes around `$TEMP': they are essential!
  75 eval set -- "$TEMP"
  76
  77 SELECTED=''
  78 ONLY_LIST=''
  79 PRINT_MAINTS=''
  80 MAINTAINERS_ONLY=''
  81 CONTINUE=''
  82 REBUILD_ERRORS=''
  83
  84 while true ; do
  85         case "$1" in
  86         -a|--arch)
  87                 # echo "Option ARCH: argument \`$2'"
  88                 if [ "$opt_a" ] ; then
  89                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  90                 else
  91                         opt_a="(\$2 == \"$2\")"
  92                 fi
  93                 SELECTED='y'
  94                 shift 2 ;;
  95         -c|--cpu)
  96                 # echo "Option CPU: argument \`$2'"
  97                 if [ "$opt_c" ] ; then
  98                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
  99                 else
 100                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 101                 fi
 102                 SELECTED='y'
 103                 shift 2 ;;
 104         -s|--soc)
 105                 # echo "Option SoC: argument \`$2'"
 106                 if [ "$opt_s" ] ; then
 107                         opt_s="${opt_s%)} || \$6 == \"$2\" || \$6 ~ /$2/)"
 108                 else
 109                         opt_s="(\$6 == \"$2\" || \$6 ~ /$2/)"
 110                 fi
 111                 SELECTED='y'
 112                 shift 2 ;;
 113         -v|--vendor)
 114                 # echo "Option VENDOR: argument \`$2'"
 115                 if [ "$opt_v" ] ; then
 116                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 117                 else
 118                         opt_v="(\$5 == \"$2\")"
 119                 fi
 120                 SELECTED='y'
 121                 shift 2 ;;
 122         -C|--check)
 123                 CHECK='C=1'
 124                 shift ;;
 125         -n|--continue)
 126                 CONTINUE='y'
 127                 shift ;;
 128         -r|--rebuild-errors)
 129                 REBUILD_ERRORS='y'
 130                 shift ;;
 131         -l|--list)
 132                 ONLY_LIST='y'
 133                 shift ;;
 134         -m|--maintainers)
 135                 ONLY_LIST='y'
 136                 PRINT_MAINTS='y'
 137                 MAINTAINERS_ONLY='y'
 138                 shift ;;
 139         -M|--mails)
 140                 ONLY_LIST='y'
 141                 PRINT_MAINTS='y'
 142                 shift ;;
 143         -h|--help)
 144                 usage ;;
 145         --)
 146                 shift ; break ;;
 147         *)
 148                 echo "Internal error!" >&2 ; exit 1 ;;
 149         esac
 150 done
 151 # echo "Remaining arguments:"
 152 # for arg do echo '--> '"\`$arg'" ; done
 153
 154 FILTER="\$1 !~ /^#/"
 155 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 156 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 157 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 158 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 159
 160 if [ "$SELECTED" ] ; then
 161         SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg)
 162
 163         # Make sure some boards from boards.cfg are actually found
 164         if [ -z "$SELECTED" ] ; then
 165                 echo "Error: No boards selected, invalid arguments"
 166                 exit 1
 167         fi
 168 fi
 169
 170 #########################################################################
 171
 172 # Print statistics when we exit
 173 trap exit 1 2 3 15
 174 trap print_stats 0
 175
 176 # Determine number of CPU cores if no default was set
 177 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 178
 179 if [ "$BUILD_NCPUS" -gt 1 ]
 180 then
 181         JOBS="-j $((BUILD_NCPUS + 1))"
 182 else
 183         JOBS=""
 184 fi
 185
 186 if [ "${MAKEALL_LOGDIR}" ] ; then
 187         LOG_DIR=${MAKEALL_LOGDIR}
 188 else
 189         LOG_DIR="LOG"
 190 fi
 191
 192 : ${BUILD_NBUILDS:=1}
 193 BUILD_MANY=0
 194
 195 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 196         BUILD_MANY=1
 197         : ${BUILD_DIR:=./build}
 198         mkdir -p "${BUILD_DIR}/ERR"
 199         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 200 fi
 201
 202 : ${BUILD_DIR:=.}
 203
 204 OUTPUT_PREFIX="${BUILD_DIR}"
 205
 206 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 207 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 208         find "${LOG_DIR}/" -type f -exec rm -f {} +
 209 fi
 210
 211 LIST=""
 212
 213 # Keep track of the number of builds and errors
 214 ERR_CNT=0
 215 ERR_LIST=""
 216 WRN_CNT=0
 217 WRN_LIST=""
 218 TOTAL_CNT=0
 219 SKIP_CNT=0
 220 CURRENT_CNT=0
 221 OLDEST_IDX=1
 222 RC=0
 223
 224 # Helper funcs for parsing boards.cfg
 225 boards_by_field()
 226 {
 227         FS="[ \t]+"
 228         [ -n "$3" ] && FS="$3"
 229         awk \
 230                 -v field="$1" \
 231                 -v select="$2" \
 232                 -F "$FS" \
 233                 '($1 !~ /^#/ && $field == select) { print $1 }' \
 234                 boards.cfg
 235 }
 236 boards_by_arch() { boards_by_field 2 "$@" ; }
 237 boards_by_cpu()  { boards_by_field 3 "$@" "[: \t]+" ; }
 238 boards_by_soc()  { boards_by_field 6 "$@" ; }
 239
 240 #########################################################################
 241 ## MPC5xx Systems
 242 #########################################################################
 243
 244 LIST_5xx="$(boards_by_cpu mpc5xx)"
 245
 246 #########################################################################
 247 ## MPC5xxx Systems
 248 #########################################################################
 249
 250 LIST_5xxx="$(boards_by_cpu mpc5xxx)"
 251
 252 #########################################################################
 253 ## MPC512x Systems
 254 #########################################################################
 255
 256 LIST_512x="$(boards_by_cpu mpc512x)"
 257
 258 #########################################################################
 259 ## MPC8xx Systems
 260 #########################################################################
 261
 262 LIST_8xx="$(boards_by_cpu mpc8xx)"
 263
 264 #########################################################################
 265 ## PPC4xx Systems
 266 #########################################################################
 267
 268 LIST_4xx="$(boards_by_cpu ppc4xx)"
 269
 270 #########################################################################
 271 ## MPC824x Systems
 272 #########################################################################
 273
 274 LIST_824x="$(boards_by_cpu mpc824x)"
 275
 276 #########################################################################
 277 ## MPC8260 Systems (includes 8250, 8255 etc.)
 278 #########################################################################
 279
 280 LIST_8260="$(boards_by_cpu mpc8260)"
 281
 282 #########################################################################
 283 ## MPC83xx Systems (includes 8349, etc.)
 284 #########################################################################
 285
 286 LIST_83xx="$(boards_by_cpu mpc83xx)"
 287
 288 #########################################################################
 289 ## MPC85xx Systems (includes 8540, 8560 etc.)
 290 #########################################################################
 291
 292 LIST_85xx="$(boards_by_cpu mpc85xx)"
 293
 294 #########################################################################
 295 ## MPC86xx Systems
 296 #########################################################################
 297
 298 LIST_86xx="$(boards_by_cpu mpc86xx)"
 299
 300 #########################################################################
 301 ## 74xx/7xx Systems
 302 #########################################################################
 303
 304 LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
 305
 306 #########################################################################
 307 ## PowerPC groups
 308 #########################################################################
 309
 310 LIST_TSEC="             \
 311         ${LIST_83xx}    \
 312         ${LIST_85xx}    \
 313         ${LIST_86xx}    \
 314 "
 315
 316 LIST_powerpc="          \
 317         ${LIST_5xx}     \
 318         ${LIST_512x}    \
 319         ${LIST_5xxx}    \
 320         ${LIST_8xx}     \
 321         ${LIST_824x}    \
 322         ${LIST_8260}    \
 323         ${LIST_83xx}    \
 324         ${LIST_85xx}    \
 325         ${LIST_86xx}    \
 326         ${LIST_4xx}     \
 327         ${LIST_74xx_7xx}\
 328 "
 329
 330 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 331 # still using "ppc" instead of "powerpc"
 332 LIST_ppc="              \
 333         ${LIST_powerpc} \
 334 "
 335
 336 #########################################################################
 337 ## StrongARM Systems
 338 #########################################################################
 339
 340 LIST_SA="$(boards_by_cpu sa1100)"
 341
 342 #########################################################################
 343 ## ARM7 Systems
 344 #########################################################################
 345
 346 LIST_ARM7="$(boards_by_cpu arm720t)"
 347
 348 #########################################################################
 349 ## ARM9 Systems
 350 #########################################################################
 351
 352 LIST_ARM9="$(boards_by_cpu arm920t)     \
 353         $(boards_by_cpu arm926ejs)      \
 354         $(boards_by_cpu arm925t)        \
 355         $(boards_by_cpu arm946es)       \
 356 "
 357
 358 #########################################################################
 359 ## ARM11 Systems
 360 #########################################################################
 361 LIST_ARM11="$(boards_by_cpu arm1136)    \
 362         $(boards_by_cpu arm1176)        \
 363 "
 364
 365 #########################################################################
 366 ## ARMV7 Systems
 367 #########################################################################
 368
 369 LIST_ARMV7="$(boards_by_cpu armv7)"
 370
 371 #########################################################################
 372 ## AT91 Systems
 373 #########################################################################
 374
 375 LIST_at91="$(boards_by_soc at91)"
 376
 377 #########################################################################
 378 ## Xscale Systems
 379 #########################################################################
 380
 381 LIST_pxa="$(boards_by_cpu pxa)"
 382
 383 LIST_ixp="$(boards_by_cpu ixp)"
 384
 385 #########################################################################
 386 ## SPEAr Systems
 387 #########################################################################
 388
 389 LIST_spear="$(boards_by_soc spear)"
 390
 391 #########################################################################
 392 ## ARM groups
 393 #########################################################################
 394
 395 LIST_arm="$(boards_by_arch arm)"
 396
 397 #########################################################################
 398 ## MIPS Systems         (default = big endian)
 399 #########################################################################
 400
 401 LIST_mips4kc="          \
 402         incaip          \
 403         incaip_100MHz   \
 404         incaip_133MHz   \
 405         incaip_150MHz   \
 406         qemu_mips       \
 407         vct_platinum    \
 408         vct_platinum_small      \
 409         vct_platinum_onenand    \
 410         vct_platinum_onenand_small      \
 411         vct_platinumavc \
 412         vct_platinumavc_small   \
 413         vct_platinumavc_onenand \
 414         vct_platinumavc_onenand_small   \
 415         vct_premium     \
 416         vct_premium_small       \
 417         vct_premium_onenand     \
 418         vct_premium_onenand_small       \
 419 "
 420
 421 LIST_au1xx0="           \
 422         dbau1000        \
 423         dbau1100        \
 424         dbau1500        \
 425         dbau1550        \
 426 "
 427
 428 LIST_mips="             \
 429         ${LIST_mips4kc} \
 430         ${LIST_mips5kc} \
 431         ${LIST_au1xx0}  \
 432 "
 433
 434 #########################################################################
 435 ## MIPS Systems         (little endian)
 436 #########################################################################
 437
 438 LIST_xburst_el="        \
 439         qi_lb60         \
 440 "
 441
 442 LIST_au1xx0_el="        \
 443         dbau1550_el     \
 444         pb1000          \
 445 "
 446 LIST_mips_el="                  \
 447         ${LIST_xburst_el}       \
 448         ${LIST_au1xx0_el}       \
 449 "
 450 #########################################################################
 451 ## OpenRISC Systems
 452 #########################################################################
 453
 454 LIST_openrisc="$(boards_by_arch openrisc)"
 455
 456 #########################################################################
 457 ## x86 Systems
 458 #########################################################################
 459
 460 LIST_x86="$(boards_by_arch x86)"
 461
 462 #########################################################################
 463 ## Nios-II Systems
 464 #########################################################################
 465
 466 LIST_nios2="$(boards_by_arch nios2)"
 467
 468 #########################################################################
 469 ## MicroBlaze Systems
 470 #########################################################################
 471
 472 LIST_microblaze="$(boards_by_arch microblaze)"
 473
 474 #########################################################################
 475 ## ColdFire Systems
 476 #########################################################################
 477
 478 LIST_m68k="$(boards_by_arch m68k)"
 479 LIST_coldfire=${LIST_m68k}
 480
 481 #########################################################################
 482 ## AVR32 Systems
 483 #########################################################################
 484
 485 LIST_avr32="$(boards_by_arch avr32)"
 486
 487 #########################################################################
 488 ## Blackfin Systems
 489 #########################################################################
 490
 491 LIST_blackfin="$(boards_by_arch blackfin)"
 492
 493 #########################################################################
 494 ## SH Systems
 495 #########################################################################
 496
 497 LIST_sh2="$(boards_by_cpu sh2)"
 498 LIST_sh3="$(boards_by_cpu sh3)"
 499 LIST_sh4="$(boards_by_cpu sh4)"
 500
 501 LIST_sh="$(boards_by_arch sh)"
 502
 503 #########################################################################
 504 ## SPARC Systems
 505 #########################################################################
 506
 507 LIST_sparc="$(boards_by_arch sparc)"
 508
 509 #########################################################################
 510 ## NDS32 Systems
 511 #########################################################################
 512
 513 LIST_nds32="$(boards_by_arch nds32)"
 514
 515 #-----------------------------------------------------------------------
 516
 517 get_target_location() {
 518         local target=$1
 519         local BOARD_NAME=""
 520         local CONFIG_NAME=""
 521         local board=""
 522         local vendor=""
 523
 524         # Automatic mode
 525         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
 526
 527         if [ -z "${line}" ] ; then echo "" ; return ; fi
 528
 529         set ${line}
 530
 531         # add default board name if needed
 532         [ $# = 3 ] && set ${line} ${1}
 533
 534         CONFIG_NAME="${1%_config}"
 535
 536         [ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
 537
 538         if [ "$4" = "-" ] ; then
 539                 board=${BOARD_NAME}
 540         else
 541                 board="$4"
 542         fi
 543
 544         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 545         [ $# -gt 6 ] && [ "$7" != "-" ] && {
 546                 tmp="${7%:*}"
 547                 if [ "$tmp" ] ; then
 548                         CONFIG_NAME="$tmp"
 549                 fi
 550         }
 551
 552         # Assign board directory to BOARDIR variable
 553         if [ -z "${vendor}" ] ; then
 554             BOARDDIR=${board}
 555         else
 556             BOARDDIR=${vendor}/${board}
 557         fi
 558
 559         echo "${CONFIG_NAME}:${BOARDDIR}"
 560 }
 561
 562 get_target_maintainers() {
 563         local name=`echo $1 | cut -d : -f 1`
 564
 565         if ! grep -qsi "[[:blank:]]${name}[[:blank:]]" MAINTAINERS ; then
 566                 echo ""
 567                 return ;
 568         fi
 569
 570         local line=`tac MAINTAINERS | grep -ni "[[:blank:]]${name}[[:blank:]]" | cut -d : -f 1`
 571         local mail=`tac MAINTAINERS | tail -n +${line} | \
 572                 sed -n ":start /.*@.*/ { b mail } ; n ; b start ; :mail /.*@.*/ { p ; n ; b mail } ; q" | \
 573                 sed "s/^.*<//;s/>.*$//"`
 574         echo "$mail"
 575 }
 576
 577 get_target_arch() {
 578         local target=$1
 579
 580         # Automatic mode
 581         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
 582
 583         if [ -z "${line}" ] ; then echo "" ; return ; fi
 584
 585         set ${line}
 586         echo "$2"
 587 }
 588
 589 list_target() {
 590         if [ "$PRINT_MAINTS" != 'y' ] ; then
 591                 echo "$1"
 592                 return
 593         fi
 594
 595         echo -n "$1:"
 596
 597         local loc=`get_target_location $1`
 598
 599         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 600
 601         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 602
 603         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 604
 605                 local dir=`echo ${loc} | cut -d ":" -f 2`
 606                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 607                 local git_result=`git log --format=%aE board/${dir} \
 608                                 include/configs/${cfg}.h | grep "@"`
 609                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 610                                                 head -n 3`
 611                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 612                         sort | uniq -c | sort -nr | head -n 3 | \
 613                         sed "s/^ \+[0-9]\+ \+//"`
 614
 615                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 616                         sort -u | tr "\n" " " | sed "s/ $//" ;
 617         else
 618                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 619                                                 sed "s/ $//" ;
 620         fi
 621
 622         echo ""
 623 }
 624
 625 # Each finished build will have a file called ${donep}${n},
 626 # where n is the index of the build. Each build
 627 # we've already noted as finished will have ${skipp}${n}.
 628 # The code managing the build process will use this information
 629 # to ensure that only BUILD_NBUILDS builds are in flight at once
 630 donep="${LOG_DIR}/._done_"
 631 skipp="${LOG_DIR}/._skip_"
 632
 633 build_target_killed() {
 634         echo "Aborted $target build."
 635         # Remove the logs for this board since it was aborted
 636         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 637         exit
 638 }
 639
 640 build_target() {
 641         target=$1
 642         build_idx=$2
 643
 644         if [ "$ONLY_LIST" == 'y' ] ; then
 645                 list_target ${target}
 646                 return
 647         fi
 648
 649         if [ $BUILD_MANY == 1 ] ; then
 650                 output_dir="${OUTPUT_PREFIX}/${target}"
 651                 mkdir -p "${output_dir}"
 652                 trap build_target_killed TERM
 653         else
 654                 output_dir="${OUTPUT_PREFIX}"
 655         fi
 656
 657         export BUILD_DIR="${output_dir}"
 658
 659         target_arch=$(get_target_arch ${target})
 660         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 661         if [ "${cross_toolchain}" ] ; then
 662             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 663         elif [ "${CROSS_COMPILE}" ] ; then
 664             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 665         else
 666             MAKE=make
 667         fi
 668
 669         ${MAKE} distclean >/dev/null
 670         ${MAKE} -s ${target}_config
 671
 672         ${MAKE} ${JOBS} ${CHECK} all \
 673                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 674
 675         # Check for 'make' errors
 676         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 677                 RC=1
 678         fi
 679
 680         if [ $BUILD_MANY == 1 ] ; then
 681                 trap - TERM
 682
 683                 ${MAKE} -s tidy
 684
 685                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 686                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 687                 else
 688                         rm ${LOG_DIR}/${target}.ERR
 689                 fi
 690         else
 691                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 692                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 693                                 : $(( ERR_CNT += 1 ))
 694                                 ERR_LIST="${ERR_LIST} $target"
 695                         else
 696                                 : $(( WRN_CNT += 1 ))
 697                                 WRN_LIST="${WRN_LIST} $target"
 698                         fi
 699                 else
 700                         rm ${LOG_DIR}/${target}.ERR
 701                 fi
 702         fi
 703
 704         OBJS=${output_dir}/u-boot
 705         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 706                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 707         fi
 708
 709         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 710
 711         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 712
 713         touch "${donep}${build_idx}"
 714 }
 715
 716 manage_builds() {
 717         search_idx=${OLDEST_IDX}
 718         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 719
 720         while true; do
 721                 if [ -e "${donep}${search_idx}" ] ; then
 722                         : $(( CURRENT_CNT-- ))
 723                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 724                                 : $(( OLDEST_IDX++ ))
 725
 726                         # Only want to count it once
 727                         rm -f "${donep}${search_idx}"
 728                         touch "${skipp}${search_idx}"
 729                 elif [ -e "${skipp}${search_idx}" ] ; then
 730                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 731                                 : $(( OLDEST_IDX++ ))
 732                 fi
 733                 : $(( search_idx++ ))
 734                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 735                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 736                                 search_idx=${OLDEST_IDX}
 737                                 sleep 1
 738                         else
 739                                 break
 740                         fi
 741                 fi
 742         done
 743 }
 744
 745 build_targets() {
 746         for t in "$@" ; do
 747                 # If a LIST_xxx var exists, use it.  But avoid variable
 748                 # expansion in the eval when a board name contains certain
 749                 # characters that the shell interprets.
 750                 case ${t} in
 751                         *[-+=]*) list= ;;
 752                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 753                 esac
 754                 if [ -n "${list}" ] ; then
 755                         build_targets ${list}
 756                 else
 757                         : $((TOTAL_CNT += 1))
 758                         : $((CURRENT_CNT += 1))
 759                         rm -f "${donep}${TOTAL_CNT}"
 760                         rm -f "${skipp}${TOTAL_CNT}"
 761                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 762                                 : $((SKIP_CNT += 1))
 763                                 touch "${donep}${TOTAL_CNT}"
 764                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 765                                 : $((SKIP_CNT += 1))
 766                                 touch "${donep}${TOTAL_CNT}"
 767                         else
 768                                 if [ $BUILD_MANY == 1 ] ; then
 769                                         build_target ${t} ${TOTAL_CNT} &
 770                                 else
 771                                         CUR_TGT="${t}"
 772                                         build_target ${t} ${TOTAL_CNT}
 773                                         CUR_TGT=''
 774                                 fi
 775                         fi
 776                 fi
 777
 778                 # We maintain a running count of all the builds we have done.
 779                 # Each finished build will have a file called ${donep}${n},
 780                 # where n is the index of the build. Each build
 781                 # we've already noted as finished will have ${skipp}${n}.
 782                 # We track the current index via TOTAL_CNT, and the oldest
 783                 # index. When we exceed the maximum number of parallel builds,
 784                 # We look from oldest to current for builds that have completed,
 785                 # and update the current count and oldest index as appropriate.
 786                 # If we've gone through the entire list, wait a second, and
 787                 # reprocess the entire list until we find a build that has
 788                 # completed
 789                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 790                         manage_builds
 791                 fi
 792         done
 793 }
 794
 795 #-----------------------------------------------------------------------
 796
 797 kill_children() {
 798         local OS=$(uname -s)
 799         local children=""
 800         case "${OS}" in
 801                 "Darwin")
 802                         # Mac OS X is known to have BSD style ps
 803                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 804                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 805                         ;;
 806                 *)
 807                         # everything else tries the GNU style
 808                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 809                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 810                         ;;
 811         esac
 812
 813         kill $children 2> /dev/null
 814         wait $children 2> /dev/null
 815
 816         exit
 817 }
 818
 819 print_stats() {
 820         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 821
 822         # Only count boards that completed
 823         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 824
 825         rm -f ${donep}* ${skipp}*
 826
 827         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 828                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 829                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 830                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 831                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 832                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 833                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 834         else
 835                 # Remove the logs for any board that was interrupted
 836                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 837         fi
 838
 839         : $((TOTAL_CNT -= ${SKIP_CNT}))
 840         echo ""
 841         echo "--------------------- SUMMARY ----------------------------"
 842         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 843                 echo "Boards skipped: ${SKIP_CNT}"
 844         fi
 845         echo "Boards compiled: ${TOTAL_CNT}"
 846         if [ ${ERR_CNT} -gt 0 ] ; then
 847                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 848         fi
 849         if [ ${WRN_CNT} -gt 0 ] ; then
 850                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 851         fi
 852         echo "----------------------------------------------------------"
 853
 854         if [ $BUILD_MANY == 1 ] ; then
 855                 kill_children
 856         fi
 857
 858         exit $RC
 859 }
 860
 861 #-----------------------------------------------------------------------
 862
 863 # Build target groups selected by options, plus any command line args
 864 set -- ${SELECTED} "$@"
 865 # run PowerPC by default
 866 [ $# = 0 ] && set -- powerpc
 867 build_targets "$@"
 868 wait