git.sur5r.net Git - u-boot/blob - MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -b BOARD,  --board BOARD     Build all boards with board name BOARD
  22           -l,        --list            List all targets to be built
  23           -m,        --maintainers     List all targets and maintainer email
  24           -M,        --mails           List all targets and all affilated emails
  25           -C,        --check           Enable build checking
  26           -n,        --continue        Continue (skip boards already built)
  27           -r,        --rebuild-errors  Rebuild any boards that errored
  28           -h,        --help            This help output
  29
  30         Selections by these options are logically ANDed; if the same option
  31         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  32         will select all configurations where the vendor is either FOO or
  33         BAR.  Any additional arguments specified on the command line are
  34         always build additionally.  See the boards.cfg file for more info.
  35
  36         If no boards are specified, then the default is "powerpc".
  37
  38         Environment variables:
  39           BUILD_NCPUS      number of parallel make jobs (default: auto)
  40           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  41           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  42                            architecture "ARCH".  Substitute "ARCH" for any
  43                            supported architecture (default: "")
  44           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  45           BUILD_DIR        output build directory (default: ./)
  46           BUILD_NBUILDS    number of parallel targets (default: 1)
  47
  48         Examples:
  49           - build all Power Architecture boards:
  50               MAKEALL -a powerpc
  51               MAKEALL --arch powerpc
  52               MAKEALL powerpc
  53           - build all PowerPC boards manufactured by vendor "esd":
  54               MAKEALL -a powerpc -v esd
  55           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  56               MAKEALL -a powerpc -v keymile -v siemens
  57           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  58               MAKEALL -c mpc83xx -v freescale 4xx
  59         EOF
  60         exit ${ret}
  61 }
  62
  63 deprecation() {
  64         echo "** Note: MAKEALL is deprecated - please use buildman instead"
  65         echo "** See tools/buildman/README for details"
  66         echo
  67 }
  68
  69 deprecation
  70
  71 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
  72 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
  73
  74 # Option processing based on util-linux-2.13/getopt-parse.bash
  75
  76 # Note that we use `"$@"' to let each command-line parameter expand to a
  77 # separate word. The quotes around `$@' are essential!
  78 # We need TEMP as the `eval set --' would nuke the return value of
  79 # getopt.
  80 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  81      -n 'MAKEALL' -- "$@"`
  82
  83 [ $? != 0 ] && usage 1
  84
  85 # Note the quotes around `$TEMP': they are essential!
  86 eval set -- "$TEMP"
  87
  88 SELECTED=''
  89 ONLY_LIST=''
  90 PRINT_MAINTS=''
  91 MAINTAINERS_ONLY=''
  92 CONTINUE=''
  93 REBUILD_ERRORS=''
  94
  95 while true ; do
  96         case "$1" in
  97         -a|--arch)
  98                 # echo "Option ARCH: argument \`$2'"
  99                 if [ "$opt_a" ] ; then
 100                         opt_a="${opt_a%)} || \$2 == \"$2\")"
 101                 else
 102                         opt_a="(\$2 == \"$2\")"
 103                 fi
 104                 SELECTED='y'
 105                 shift 2 ;;
 106         -c|--cpu)
 107                 # echo "Option CPU: argument \`$2'"
 108                 if [ "$opt_c" ] ; then
 109                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 110                 else
 111                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 112                 fi
 113                 SELECTED='y'
 114                 shift 2 ;;
 115         -s|--soc)
 116                 # echo "Option SoC: argument \`$2'"
 117                 if [ "$opt_s" ] ; then
 118                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 119                 else
 120                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 121                 fi
 122                 SELECTED='y'
 123                 shift 2 ;;
 124         -v|--vendor)
 125                 # echo "Option VENDOR: argument \`$2'"
 126                 if [ "$opt_v" ] ; then
 127                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 128                 else
 129                         opt_v="(\$5 == \"$2\")"
 130                 fi
 131                 SELECTED='y'
 132                 shift 2 ;;
 133         -b|--board)
 134                 # echo "Option BOARD: argument \`$2'"
 135                 if [ "$opt_b" ] ; then
 136                         opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
 137                 else
 138                         # We need to check the 7th field too
 139                         # for boards whose 6th field is "-"
 140                         opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
 141                 fi
 142                 SELECTED='y'
 143                 shift 2 ;;
 144         -C|--check)
 145                 CHECK='C=1'
 146                 shift ;;
 147         -n|--continue)
 148                 CONTINUE='y'
 149                 shift ;;
 150         -r|--rebuild-errors)
 151                 REBUILD_ERRORS='y'
 152                 shift ;;
 153         -l|--list)
 154                 ONLY_LIST='y'
 155                 shift ;;
 156         -m|--maintainers)
 157                 ONLY_LIST='y'
 158                 PRINT_MAINTS='y'
 159                 MAINTAINERS_ONLY='y'
 160                 shift ;;
 161         -M|--mails)
 162                 ONLY_LIST='y'
 163                 PRINT_MAINTS='y'
 164                 shift ;;
 165         -h|--help)
 166                 usage ;;
 167         --)
 168                 shift ; break ;;
 169         *)
 170                 echo "Internal error!" >&2 ; exit 1 ;;
 171         esac
 172 done
 173
 174 GNU_MAKE=$(scripts/show-gnu-make) || {
 175         echo "GNU Make not found" >&2
 176         exit 1
 177 }
 178
 179 # echo "Remaining arguments:"
 180 # for arg do echo '--> '"\`$arg'" ; done
 181
 182 tools/genboardscfg.py || {
 183         echo "Failed to generate boards.cfg" >&2
 184         exit 1
 185 }
 186
 187 FILTER="\$1 !~ /^#/"
 188 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 189 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 190 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 191 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 192 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
 193
 194 if [ "$SELECTED" ] ; then
 195         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 196
 197         # Make sure some boards from boards.cfg are actually found
 198         if [ -z "$SELECTED" ] ; then
 199                 echo "Error: No boards selected, invalid arguments"
 200                 exit 1
 201         fi
 202 fi
 203
 204 #########################################################################
 205
 206 # Print statistics when we exit
 207 trap exit 1 2 3 15
 208 trap print_stats 0
 209
 210 # Determine number of CPU cores if no default was set
 211 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 212
 213 if [ "$BUILD_NCPUS" -gt 1 ]
 214 then
 215         JOBS="-j $((BUILD_NCPUS + 1))"
 216 else
 217         JOBS=""
 218 fi
 219
 220 if [ "${MAKEALL_LOGDIR}" ] ; then
 221         LOG_DIR=${MAKEALL_LOGDIR}
 222 else
 223         LOG_DIR="LOG"
 224 fi
 225
 226 : ${BUILD_NBUILDS:=1}
 227 BUILD_MANY=0
 228
 229 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 230         BUILD_MANY=1
 231         : ${BUILD_DIR:=./build}
 232         mkdir -p "${BUILD_DIR}/ERR"
 233         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 234 fi
 235
 236 : ${BUILD_DIR:=.}
 237
 238 OUTPUT_PREFIX="${BUILD_DIR}"
 239
 240 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 241 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 242         find "${LOG_DIR}/" -type f -exec rm -f {} +
 243 fi
 244
 245 LIST=""
 246
 247 # Keep track of the number of builds and errors
 248 ERR_CNT=0
 249 ERR_LIST=""
 250 WRN_CNT=0
 251 WRN_LIST=""
 252 TOTAL_CNT=0
 253 SKIP_CNT=0
 254 CURRENT_CNT=0
 255 OLDEST_IDX=1
 256 RC=0
 257
 258 # Helper funcs for parsing boards.cfg
 259 targets_by_field()
 260 {
 261         field=$1
 262         regexp=$2
 263
 264         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
 265                                                                 boards.cfg
 266 }
 267
 268 targets_by_arch() { targets_by_field 2 "$@" ; }
 269 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
 270 targets_by_soc()  { targets_by_field 4 "$@" ; }
 271
 272 #########################################################################
 273 ## MPC5xx Systems
 274 #########################################################################
 275
 276 LIST_5xx="$(targets_by_cpu mpc5xx)"
 277
 278 #########################################################################
 279 ## MPC5xxx Systems
 280 #########################################################################
 281
 282 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
 283
 284 #########################################################################
 285 ## MPC512x Systems
 286 #########################################################################
 287
 288 LIST_512x="$(targets_by_cpu mpc512x)"
 289
 290 #########################################################################
 291 ## MPC8xx Systems
 292 #########################################################################
 293
 294 LIST_8xx="$(targets_by_cpu mpc8xx)"
 295
 296 #########################################################################
 297 ## PPC4xx Systems
 298 #########################################################################
 299
 300 LIST_4xx="$(targets_by_cpu ppc4xx)"
 301
 302 #########################################################################
 303 ## MPC8260 Systems (includes 8250, 8255 etc.)
 304 #########################################################################
 305
 306 LIST_8260="$(targets_by_cpu mpc8260)"
 307
 308 #########################################################################
 309 ## MPC83xx Systems (includes 8349, etc.)
 310 #########################################################################
 311
 312 LIST_83xx="$(targets_by_cpu mpc83xx)"
 313
 314 #########################################################################
 315 ## MPC85xx Systems (includes 8540, 8560 etc.)
 316 #########################################################################
 317
 318 LIST_85xx="$(targets_by_cpu mpc85xx)"
 319
 320 #########################################################################
 321 ## MPC86xx Systems
 322 #########################################################################
 323
 324 LIST_86xx="$(targets_by_cpu mpc86xx)"
 325
 326 #########################################################################
 327 ## PowerPC groups
 328 #########################################################################
 329
 330 LIST_TSEC="             \
 331         ${LIST_83xx}    \
 332         ${LIST_85xx}    \
 333         ${LIST_86xx}    \
 334 "
 335
 336 LIST_powerpc="          \
 337         ${LIST_5xx}     \
 338         ${LIST_512x}    \
 339         ${LIST_5xxx}    \
 340         ${LIST_8xx}     \
 341         ${LIST_824x}    \
 342         ${LIST_8260}    \
 343         ${LIST_83xx}    \
 344         ${LIST_85xx}    \
 345         ${LIST_86xx}    \
 346         ${LIST_4xx}     \
 347 "
 348
 349 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 350 # still using "ppc" instead of "powerpc"
 351 LIST_ppc="              \
 352         ${LIST_powerpc} \
 353 "
 354
 355 #########################################################################
 356 ## StrongARM Systems
 357 #########################################################################
 358
 359 LIST_SA="$(targets_by_cpu sa1100)"
 360
 361 #########################################################################
 362 ## ARM7 Systems
 363 #########################################################################
 364
 365 LIST_ARM7="$(targets_by_cpu arm720t)"
 366
 367 #########################################################################
 368 ## ARM9 Systems
 369 #########################################################################
 370
 371 LIST_ARM9="$(targets_by_cpu arm920t)    \
 372         $(targets_by_cpu arm926ejs)     \
 373         $(targets_by_cpu arm946es)      \
 374 "
 375
 376 #########################################################################
 377 ## ARM11 Systems
 378 #########################################################################
 379 LIST_ARM11="$(targets_by_cpu arm1136)   \
 380         $(targets_by_cpu arm1176)       \
 381 "
 382
 383 #########################################################################
 384 ## ARMV7 Systems
 385 #########################################################################
 386
 387 LIST_ARMV7="$(targets_by_cpu armv7)"
 388
 389 #########################################################################
 390 ## ARMV8 Systems
 391 #########################################################################
 392
 393 LIST_ARMV8="$(targets_by_cpu armv8)"
 394
 395 #########################################################################
 396 ## AT91 Systems
 397 #########################################################################
 398
 399 LIST_at91="$(targets_by_soc at91)"
 400
 401 #########################################################################
 402 ## Xscale Systems
 403 #########################################################################
 404
 405 LIST_pxa="$(targets_by_cpu pxa)"
 406
 407 #########################################################################
 408 ## SPEAr Systems
 409 #########################################################################
 410
 411 LIST_spear="$(targets_by_soc spear)"
 412
 413 #########################################################################
 414 ## ARM groups
 415 #########################################################################
 416
 417 LIST_arm="$(targets_by_arch arm |               \
 418         for ARMV8_TARGET in $LIST_ARMV8;        \
 419                 do sed "/$ARMV8_TARGET/d";      \
 420         done)                                   \
 421 "
 422
 423 #########################################################################
 424 ## MIPS Systems         (default = big endian)
 425 #########################################################################
 426
 427 LIST_mips="$(targets_by_arch mips)"
 428
 429 #########################################################################
 430 ## OpenRISC Systems
 431 #########################################################################
 432
 433 LIST_openrisc="$(targets_by_arch openrisc)"
 434
 435 #########################################################################
 436 ## x86 Systems
 437 #########################################################################
 438
 439 LIST_x86="$(targets_by_arch x86)"
 440
 441 #########################################################################
 442 ## Nios-II Systems
 443 #########################################################################
 444
 445 LIST_nios2="$(targets_by_arch nios2)"
 446
 447 #########################################################################
 448 ## MicroBlaze Systems
 449 #########################################################################
 450
 451 LIST_microblaze="$(targets_by_arch microblaze)"
 452
 453 #########################################################################
 454 ## ColdFire Systems
 455 #########################################################################
 456
 457 LIST_m68k="$(targets_by_arch m68k)"
 458 LIST_coldfire=${LIST_m68k}
 459
 460 #########################################################################
 461 ## AVR32 Systems
 462 #########################################################################
 463
 464 LIST_avr32="$(targets_by_arch avr32)"
 465
 466 #########################################################################
 467 ## Blackfin Systems
 468 #########################################################################
 469
 470 LIST_blackfin="$(targets_by_arch blackfin)"
 471
 472 #########################################################################
 473 ## SH Systems
 474 #########################################################################
 475
 476 LIST_sh2="$(targets_by_cpu sh2)"
 477 LIST_sh3="$(targets_by_cpu sh3)"
 478 LIST_sh4="$(targets_by_cpu sh4)"
 479
 480 LIST_sh="$(targets_by_arch sh)"
 481
 482 #########################################################################
 483 ## SPARC Systems
 484 #########################################################################
 485
 486 LIST_sparc="$(targets_by_arch sparc)"
 487
 488 #########################################################################
 489 ## NDS32 Systems
 490 #########################################################################
 491
 492 LIST_nds32="$(targets_by_arch nds32)"
 493
 494 #########################################################################
 495 ## ARC Systems
 496 #########################################################################
 497
 498 LIST_arc="$(targets_by_arch arc)"
 499
 500 #-----------------------------------------------------------------------
 501
 502 get_target_location() {
 503         local target=$1
 504         local BOARD_NAME=""
 505         local CONFIG_NAME=""
 506         local board=""
 507         local vendor=""
 508
 509         # Automatic mode
 510         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 511         if [ -z "${line}" ] ; then echo "" ; return ; fi
 512
 513         set ${line}
 514
 515         CONFIG_NAME="${7%_defconfig}"
 516
 517         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
 518
 519         if [ $# -gt 5 ]; then
 520                 if [ "$6" = "-" ] ; then
 521                         board=${BOARD_NAME}
 522                 else
 523                         board="$6"
 524                 fi
 525         fi
 526
 527         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 528         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 529                 tmp="${8%:*}"
 530                 if [ "$tmp" ] ; then
 531                         CONFIG_NAME="$tmp"
 532                 fi
 533         }
 534
 535         # Assign board directory to BOARDIR variable
 536         if [ "${vendor}" == "-" ] ; then
 537             BOARDDIR=${board}
 538         else
 539             BOARDDIR=${vendor}/${board}
 540         fi
 541
 542         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 543 }
 544
 545 get_target_maintainers() {
 546         local name=`echo $1 | cut -d : -f 3`
 547
 548         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 549         if [ -z "${line}" ]; then
 550                 echo ""
 551                 return ;
 552         fi
 553
 554         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 555         [ "$mails" == "-" ] && mails=""
 556         echo "$mails"
 557 }
 558
 559 get_target_arch() {
 560         local target=$1
 561
 562         awk '$7 == "'$target'" { print $2 }' boards.cfg
 563 }
 564
 565 list_target() {
 566         if [ "$PRINT_MAINTS" != 'y' ] ; then
 567                 echo "$1"
 568                 return
 569         fi
 570
 571         echo -n "$1:"
 572
 573         local loc=`get_target_location $1`
 574
 575         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 576
 577         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 578
 579         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 580
 581                 local dir=`echo ${loc} | cut -d ":" -f 2`
 582                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 583                 local git_result=`git log --format=%aE board/${dir} \
 584                                 include/configs/${cfg}.h | grep "@"`
 585                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 586                                                 head -n 3`
 587                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 588                         sort | uniq -c | sort -nr | head -n 3 | \
 589                         sed "s/^ \+[0-9]\+ \+//"`
 590
 591                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 592                         sort -u | tr "\n" " " | sed "s/ $//" ;
 593         else
 594                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 595                                                 sed "s/ $//" ;
 596         fi
 597
 598         echo ""
 599 }
 600
 601 # Each finished build will have a file called ${donep}${n},
 602 # where n is the index of the build. Each build
 603 # we've already noted as finished will have ${skipp}${n}.
 604 # The code managing the build process will use this information
 605 # to ensure that only BUILD_NBUILDS builds are in flight at once
 606 donep="${LOG_DIR}/._done_"
 607 skipp="${LOG_DIR}/._skip_"
 608
 609 build_target_killed() {
 610         echo "Aborted $target build."
 611         # Remove the logs for this board since it was aborted
 612         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 613         exit
 614 }
 615
 616 build_target() {
 617         target=$1
 618         build_idx=$2
 619
 620         if [ "$ONLY_LIST" == 'y' ] ; then
 621                 list_target ${target}
 622                 return
 623         fi
 624
 625         if [ $BUILD_MANY == 1 ] ; then
 626                 output_dir="${OUTPUT_PREFIX}/${target}"
 627                 mkdir -p "${output_dir}"
 628                 trap build_target_killed TERM
 629         else
 630                 output_dir="${OUTPUT_PREFIX}"
 631         fi
 632
 633         target_arch=$(get_target_arch ${target})
 634         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 635         if [ "${cross_toolchain}" ] ; then
 636             MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
 637         elif [ "${CROSS_COMPILE}" ] ; then
 638             MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
 639         else
 640             MAKE=$GNU_MAKE
 641         fi
 642
 643         if [  "${output_dir}" != "." ] ; then
 644                 MAKE="${MAKE} O=${output_dir}"
 645         fi
 646
 647         ${MAKE} mrproper >/dev/null
 648
 649         echo "Building ${target} board..."
 650         ${MAKE} -s ${target}_defconfig >/dev/null
 651
 652         ${MAKE} ${JOBS} ${CHECK} all \
 653                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 654
 655         # Check for 'make' errors
 656         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 657                 RC=1
 658         fi
 659
 660         OBJS=${output_dir}/u-boot
 661         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 662                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 663         fi
 664
 665         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 666
 667         if [ $BUILD_MANY == 1 ] ; then
 668                 trap - TERM
 669
 670                 ${MAKE} -s clean
 671
 672                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 673                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 674                 else
 675                         rm ${LOG_DIR}/${target}.ERR
 676                 fi
 677         else
 678                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 679                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 680                                 : $(( ERR_CNT += 1 ))
 681                                 ERR_LIST="${ERR_LIST} $target"
 682                         else
 683                                 : $(( WRN_CNT += 1 ))
 684                                 WRN_LIST="${WRN_LIST} $target"
 685                         fi
 686                 else
 687                         rm ${LOG_DIR}/${target}.ERR
 688                 fi
 689         fi
 690
 691         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 692
 693         touch "${donep}${build_idx}"
 694 }
 695
 696 manage_builds() {
 697         search_idx=${OLDEST_IDX}
 698         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 699
 700         while true; do
 701                 if [ -e "${donep}${search_idx}" ] ; then
 702                         : $(( CURRENT_CNT-- ))
 703                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 704                                 : $(( OLDEST_IDX++ ))
 705
 706                         # Only want to count it once
 707                         rm -f "${donep}${search_idx}"
 708                         touch "${skipp}${search_idx}"
 709                 elif [ -e "${skipp}${search_idx}" ] ; then
 710                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 711                                 : $(( OLDEST_IDX++ ))
 712                 fi
 713                 : $(( search_idx++ ))
 714                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 715                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 716                                 search_idx=${OLDEST_IDX}
 717                                 sleep 1
 718                         else
 719                                 break
 720                         fi
 721                 fi
 722         done
 723 }
 724
 725 build_targets() {
 726         for t in "$@" ; do
 727                 # If a LIST_xxx var exists, use it.  But avoid variable
 728                 # expansion in the eval when a board name contains certain
 729                 # characters that the shell interprets.
 730                 case ${t} in
 731                         *[-+=]*) list= ;;
 732                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 733                 esac
 734                 if [ -n "${list}" ] ; then
 735                         build_targets ${list}
 736                 else
 737                         : $((TOTAL_CNT += 1))
 738                         : $((CURRENT_CNT += 1))
 739                         rm -f "${donep}${TOTAL_CNT}"
 740                         rm -f "${skipp}${TOTAL_CNT}"
 741                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 742                                 : $((SKIP_CNT += 1))
 743                                 touch "${donep}${TOTAL_CNT}"
 744                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 745                                 : $((SKIP_CNT += 1))
 746                                 touch "${donep}${TOTAL_CNT}"
 747                         else
 748                                 if [ $BUILD_MANY == 1 ] ; then
 749                                         build_target ${t} ${TOTAL_CNT} &
 750                                 else
 751                                         CUR_TGT="${t}"
 752                                         build_target ${t} ${TOTAL_CNT}
 753                                         CUR_TGT=''
 754                                 fi
 755                         fi
 756                 fi
 757
 758                 # We maintain a running count of all the builds we have done.
 759                 # Each finished build will have a file called ${donep}${n},
 760                 # where n is the index of the build. Each build
 761                 # we've already noted as finished will have ${skipp}${n}.
 762                 # We track the current index via TOTAL_CNT, and the oldest
 763                 # index. When we exceed the maximum number of parallel builds,
 764                 # We look from oldest to current for builds that have completed,
 765                 # and update the current count and oldest index as appropriate.
 766                 # If we've gone through the entire list, wait a second, and
 767                 # reprocess the entire list until we find a build that has
 768                 # completed
 769                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 770                         manage_builds
 771                 fi
 772         done
 773 }
 774
 775 #-----------------------------------------------------------------------
 776
 777 kill_children() {
 778         local OS=$(uname -s)
 779         local children=""
 780         case "${OS}" in
 781                 "Darwin")
 782                         # Mac OS X is known to have BSD style ps
 783                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 784                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 785                         ;;
 786                 *)
 787                         # everything else tries the GNU style
 788                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 789                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 790                         ;;
 791         esac
 792
 793         kill $children 2> /dev/null
 794         wait $children 2> /dev/null
 795
 796         exit
 797 }
 798
 799 print_stats() {
 800         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 801
 802         # Only count boards that completed
 803         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 804
 805         rm -f ${donep}* ${skipp}*
 806
 807         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 808                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 809                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 810                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 811                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 812                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 813                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 814         else
 815                 # Remove the logs for any board that was interrupted
 816                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 817         fi
 818
 819         : $((TOTAL_CNT -= ${SKIP_CNT}))
 820         echo ""
 821         echo "--------------------- SUMMARY ----------------------------"
 822         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 823                 echo "Boards skipped: ${SKIP_CNT}"
 824         fi
 825         echo "Boards compiled: ${TOTAL_CNT}"
 826         if [ ${ERR_CNT} -gt 0 ] ; then
 827                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 828         fi
 829         if [ ${WRN_CNT} -gt 0 ] ; then
 830                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 831         fi
 832         echo "----------------------------------------------------------"
 833
 834         if [ $BUILD_MANY == 1 ] ; then
 835                 kill_children
 836         fi
 837
 838         deprecation
 839
 840         exit $RC
 841 }
 842
 843 #-----------------------------------------------------------------------
 844
 845 # Build target groups selected by options, plus any command line args
 846 set -- ${SELECTED} "$@"
 847 # run PowerPC by default
 848 [ $# = 0 ] && set -- powerpc
 849 build_targets "$@"
 850 wait