]> git.sur5r.net Git - u-boot/blob - MAKEALL
dm: cros_ec: Convert the I2C tunnel code to use driver model
[u-boot] / MAKEALL
1 #!/bin/bash
2 # Tool mainly for U-Boot Quality Assurance: build one or more board
3 # configurations with minimal verbosity, showing only warnings and
4 # errors.
5 #
6 # SPDX-License-Identifier:      GPL-2.0+
7
8 usage()
9 {
10         # if exiting with 0, write to stdout, else write to stderr
11         local ret=${1:-0}
12         [ "${ret}" -eq 1 ] && exec 1>&2
13         cat <<-EOF
14         Usage: MAKEALL [options] [--] [boards-to-build]
15
16         Options:
17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
20           -s SOC,    --soc SOC         Build all boards with soc SOC
21           -b BOARD,  --board BOARD     Build all boards with board name BOARD
22           -l,        --list            List all targets to be built
23           -m,        --maintainers     List all targets and maintainer email
24           -M,        --mails           List all targets and all affilated emails
25           -C,        --check           Enable build checking
26           -n,        --continue        Continue (skip boards already built)
27           -r,        --rebuild-errors  Rebuild any boards that errored
28           -h,        --help            This help output
29
30         Selections by these options are logically ANDed; if the same option
31         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
32         will select all configurations where the vendor is either FOO or
33         BAR.  Any additional arguments specified on the command line are
34         always build additionally.  See the boards.cfg file for more info.
35
36         If no boards are specified, then the default is "powerpc".
37
38         Environment variables:
39           BUILD_NCPUS      number of parallel make jobs (default: auto)
40           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
41           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
42                            architecture "ARCH".  Substitute "ARCH" for any
43                            supported architecture (default: "")
44           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
45           BUILD_DIR        output build directory (default: ./)
46           BUILD_NBUILDS    number of parallel targets (default: 1)
47
48         Examples:
49           - build all Power Architecture boards:
50               MAKEALL -a powerpc
51               MAKEALL --arch powerpc
52               MAKEALL powerpc
53           - build all PowerPC boards manufactured by vendor "esd":
54               MAKEALL -a powerpc -v esd
55           - build all PowerPC boards manufactured either by "keymile" or "siemens":
56               MAKEALL -a powerpc -v keymile -v siemens
57           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
58               MAKEALL -c mpc83xx -v freescale 4xx
59         EOF
60         exit ${ret}
61 }
62
63 deprecation() {
64         echo "** Note: MAKEALL is deprecated - please use buildman instead"
65         echo "** See tools/buildman/README for details"
66         echo
67 }
68
69 deprecation
70
71 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
72 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
73
74 # Option processing based on util-linux-2.13/getopt-parse.bash
75
76 # Note that we use `"$@"' to let each command-line parameter expand to a
77 # separate word. The quotes around `$@' are essential!
78 # We need TEMP as the `eval set --' would nuke the return value of
79 # getopt.
80 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
81      -n 'MAKEALL' -- "$@"`
82
83 [ $? != 0 ] && usage 1
84
85 # Note the quotes around `$TEMP': they are essential!
86 eval set -- "$TEMP"
87
88 SELECTED=''
89 ONLY_LIST=''
90 PRINT_MAINTS=''
91 MAINTAINERS_ONLY=''
92 CONTINUE=''
93 REBUILD_ERRORS=''
94
95 while true ; do
96         case "$1" in
97         -a|--arch)
98                 # echo "Option ARCH: argument \`$2'"
99                 if [ "$opt_a" ] ; then
100                         opt_a="${opt_a%)} || \$2 == \"$2\")"
101                 else
102                         opt_a="(\$2 == \"$2\")"
103                 fi
104                 SELECTED='y'
105                 shift 2 ;;
106         -c|--cpu)
107                 # echo "Option CPU: argument \`$2'"
108                 if [ "$opt_c" ] ; then
109                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
110                 else
111                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
112                 fi
113                 SELECTED='y'
114                 shift 2 ;;
115         -s|--soc)
116                 # echo "Option SoC: argument \`$2'"
117                 if [ "$opt_s" ] ; then
118                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
119                 else
120                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
121                 fi
122                 SELECTED='y'
123                 shift 2 ;;
124         -v|--vendor)
125                 # echo "Option VENDOR: argument \`$2'"
126                 if [ "$opt_v" ] ; then
127                         opt_v="${opt_v%)} || \$5 == \"$2\")"
128                 else
129                         opt_v="(\$5 == \"$2\")"
130                 fi
131                 SELECTED='y'
132                 shift 2 ;;
133         -b|--board)
134                 # echo "Option BOARD: argument \`$2'"
135                 if [ "$opt_b" ] ; then
136                         opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
137                 else
138                         # We need to check the 7th field too
139                         # for boards whose 6th field is "-"
140                         opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
141                 fi
142                 SELECTED='y'
143                 shift 2 ;;
144         -C|--check)
145                 CHECK='C=1'
146                 shift ;;
147         -n|--continue)
148                 CONTINUE='y'
149                 shift ;;
150         -r|--rebuild-errors)
151                 REBUILD_ERRORS='y'
152                 shift ;;
153         -l|--list)
154                 ONLY_LIST='y'
155                 shift ;;
156         -m|--maintainers)
157                 ONLY_LIST='y'
158                 PRINT_MAINTS='y'
159                 MAINTAINERS_ONLY='y'
160                 shift ;;
161         -M|--mails)
162                 ONLY_LIST='y'
163                 PRINT_MAINTS='y'
164                 shift ;;
165         -h|--help)
166                 usage ;;
167         --)
168                 shift ; break ;;
169         *)
170                 echo "Internal error!" >&2 ; exit 1 ;;
171         esac
172 done
173
174 GNU_MAKE=$(scripts/show-gnu-make) || {
175         echo "GNU Make not found" >&2
176         exit 1
177 }
178
179 # echo "Remaining arguments:"
180 # for arg do echo '--> '"\`$arg'" ; done
181
182 tools/genboardscfg.py || {
183         echo "Failed to generate boards.cfg" >&2
184         exit 1
185 }
186
187 FILTER="\$1 !~ /^#/"
188 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
189 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
190 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
191 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
192 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
193
194 if [ "$SELECTED" ] ; then
195         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
196
197         # Make sure some boards from boards.cfg are actually found
198         if [ -z "$SELECTED" ] ; then
199                 echo "Error: No boards selected, invalid arguments"
200                 exit 1
201         fi
202 fi
203
204 #########################################################################
205
206 # Print statistics when we exit
207 trap exit 1 2 3 15
208 trap print_stats 0
209
210 # Determine number of CPU cores if no default was set
211 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
212
213 if [ "$BUILD_NCPUS" -gt 1 ]
214 then
215         JOBS="-j $((BUILD_NCPUS + 1))"
216 else
217         JOBS=""
218 fi
219
220 if [ "${MAKEALL_LOGDIR}" ] ; then
221         LOG_DIR=${MAKEALL_LOGDIR}
222 else
223         LOG_DIR="LOG"
224 fi
225
226 : ${BUILD_NBUILDS:=1}
227 BUILD_MANY=0
228
229 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
230         BUILD_MANY=1
231         : ${BUILD_DIR:=./build}
232         mkdir -p "${BUILD_DIR}/ERR"
233         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
234 fi
235
236 : ${BUILD_DIR:=.}
237
238 OUTPUT_PREFIX="${BUILD_DIR}"
239
240 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
241 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
242         find "${LOG_DIR}/" -type f -exec rm -f {} +
243 fi
244
245 LIST=""
246
247 # Keep track of the number of builds and errors
248 ERR_CNT=0
249 ERR_LIST=""
250 WRN_CNT=0
251 WRN_LIST=""
252 TOTAL_CNT=0
253 SKIP_CNT=0
254 CURRENT_CNT=0
255 OLDEST_IDX=1
256 RC=0
257
258 # Helper funcs for parsing boards.cfg
259 targets_by_field()
260 {
261         field=$1
262         regexp=$2
263
264         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
265                                                                 boards.cfg
266 }
267
268 targets_by_arch() { targets_by_field 2 "$@" ; }
269 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
270 targets_by_soc()  { targets_by_field 4 "$@" ; }
271
272 #########################################################################
273 ## MPC5xx Systems
274 #########################################################################
275
276 LIST_5xx="$(targets_by_cpu mpc5xx)"
277
278 #########################################################################
279 ## MPC5xxx Systems
280 #########################################################################
281
282 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
283
284 #########################################################################
285 ## MPC512x Systems
286 #########################################################################
287
288 LIST_512x="$(targets_by_cpu mpc512x)"
289
290 #########################################################################
291 ## MPC8xx Systems
292 #########################################################################
293
294 LIST_8xx="$(targets_by_cpu mpc8xx)"
295
296 #########################################################################
297 ## PPC4xx Systems
298 #########################################################################
299
300 LIST_4xx="$(targets_by_cpu ppc4xx)"
301
302 #########################################################################
303 ## MPC8260 Systems (includes 8250, 8255 etc.)
304 #########################################################################
305
306 LIST_8260="$(targets_by_cpu mpc8260)"
307
308 #########################################################################
309 ## MPC83xx Systems (includes 8349, etc.)
310 #########################################################################
311
312 LIST_83xx="$(targets_by_cpu mpc83xx)"
313
314 #########################################################################
315 ## MPC85xx Systems (includes 8540, 8560 etc.)
316 #########################################################################
317
318 LIST_85xx="$(targets_by_cpu mpc85xx)"
319
320 #########################################################################
321 ## MPC86xx Systems
322 #########################################################################
323
324 LIST_86xx="$(targets_by_cpu mpc86xx)"
325
326 #########################################################################
327 ## PowerPC groups
328 #########################################################################
329
330 LIST_TSEC="             \
331         ${LIST_83xx}    \
332         ${LIST_85xx}    \
333         ${LIST_86xx}    \
334 "
335
336 LIST_powerpc="          \
337         ${LIST_5xx}     \
338         ${LIST_512x}    \
339         ${LIST_5xxx}    \
340         ${LIST_8xx}     \
341         ${LIST_824x}    \
342         ${LIST_8260}    \
343         ${LIST_83xx}    \
344         ${LIST_85xx}    \
345         ${LIST_86xx}    \
346         ${LIST_4xx}     \
347 "
348
349 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
350 # still using "ppc" instead of "powerpc"
351 LIST_ppc="              \
352         ${LIST_powerpc} \
353 "
354
355 #########################################################################
356 ## StrongARM Systems
357 #########################################################################
358
359 LIST_SA="$(targets_by_cpu sa1100)"
360
361 #########################################################################
362 ## ARM7 Systems
363 #########################################################################
364
365 LIST_ARM7="$(targets_by_cpu arm720t)"
366
367 #########################################################################
368 ## ARM9 Systems
369 #########################################################################
370
371 LIST_ARM9="$(targets_by_cpu arm920t)    \
372         $(targets_by_cpu arm926ejs)     \
373         $(targets_by_cpu arm946es)      \
374 "
375
376 #########################################################################
377 ## ARM11 Systems
378 #########################################################################
379 LIST_ARM11="$(targets_by_cpu arm1136)   \
380         $(targets_by_cpu arm1176)       \
381 "
382
383 #########################################################################
384 ## ARMV7 Systems
385 #########################################################################
386
387 LIST_ARMV7="$(targets_by_cpu armv7)"
388
389 #########################################################################
390 ## ARMV8 Systems
391 #########################################################################
392
393 LIST_ARMV8="$(targets_by_cpu armv8)"
394
395 #########################################################################
396 ## AT91 Systems
397 #########################################################################
398
399 LIST_at91="$(targets_by_soc at91)"
400
401 #########################################################################
402 ## Xscale Systems
403 #########################################################################
404
405 LIST_pxa="$(targets_by_cpu pxa)"
406
407 #########################################################################
408 ## SPEAr Systems
409 #########################################################################
410
411 LIST_spear="$(targets_by_soc spear)"
412
413 #########################################################################
414 ## ARM groups
415 #########################################################################
416
417 LIST_arm="$(targets_by_arch arm |               \
418         for ARMV8_TARGET in $LIST_ARMV8;        \
419                 do sed "/$ARMV8_TARGET/d";      \
420         done)                                   \
421 "
422
423 #########################################################################
424 ## MIPS Systems         (default = big endian)
425 #########################################################################
426
427 LIST_mips="$(targets_by_arch mips)"
428
429 #########################################################################
430 ## OpenRISC Systems
431 #########################################################################
432
433 LIST_openrisc="$(targets_by_arch openrisc)"
434
435 #########################################################################
436 ## x86 Systems
437 #########################################################################
438
439 LIST_x86="$(targets_by_arch x86)"
440
441 #########################################################################
442 ## Nios-II Systems
443 #########################################################################
444
445 LIST_nios2="$(targets_by_arch nios2)"
446
447 #########################################################################
448 ## MicroBlaze Systems
449 #########################################################################
450
451 LIST_microblaze="$(targets_by_arch microblaze)"
452
453 #########################################################################
454 ## ColdFire Systems
455 #########################################################################
456
457 LIST_m68k="$(targets_by_arch m68k)"
458 LIST_coldfire=${LIST_m68k}
459
460 #########################################################################
461 ## AVR32 Systems
462 #########################################################################
463
464 LIST_avr32="$(targets_by_arch avr32)"
465
466 #########################################################################
467 ## Blackfin Systems
468 #########################################################################
469
470 LIST_blackfin="$(targets_by_arch blackfin)"
471
472 #########################################################################
473 ## SH Systems
474 #########################################################################
475
476 LIST_sh2="$(targets_by_cpu sh2)"
477 LIST_sh3="$(targets_by_cpu sh3)"
478 LIST_sh4="$(targets_by_cpu sh4)"
479
480 LIST_sh="$(targets_by_arch sh)"
481
482 #########################################################################
483 ## SPARC Systems
484 #########################################################################
485
486 LIST_sparc="$(targets_by_arch sparc)"
487
488 #########################################################################
489 ## NDS32 Systems
490 #########################################################################
491
492 LIST_nds32="$(targets_by_arch nds32)"
493
494 #########################################################################
495 ## ARC Systems
496 #########################################################################
497
498 LIST_arc="$(targets_by_arch arc)"
499
500 #-----------------------------------------------------------------------
501
502 get_target_location() {
503         local target=$1
504         local BOARD_NAME=""
505         local CONFIG_NAME=""
506         local board=""
507         local vendor=""
508
509         # Automatic mode
510         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
511         if [ -z "${line}" ] ; then echo "" ; return ; fi
512
513         set ${line}
514
515         CONFIG_NAME="${7%_defconfig}"
516
517         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
518
519         if [ $# -gt 5 ]; then
520                 if [ "$6" = "-" ] ; then
521                         board=${BOARD_NAME}
522                 else
523                         board="$6"
524                 fi
525         fi
526
527         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
528         [ $# -gt 6 ] && [ "$8" != "-" ] && {
529                 tmp="${8%:*}"
530                 if [ "$tmp" ] ; then
531                         CONFIG_NAME="$tmp"
532                 fi
533         }
534
535         # Assign board directory to BOARDIR variable
536         if [ "${vendor}" == "-" ] ; then
537             BOARDDIR=${board}
538         else
539             BOARDDIR=${vendor}/${board}
540         fi
541
542         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
543 }
544
545 get_target_maintainers() {
546         local name=`echo $1 | cut -d : -f 3`
547
548         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
549         if [ -z "${line}" ]; then
550                 echo ""
551                 return ;
552         fi
553
554         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
555         [ "$mails" == "-" ] && mails=""
556         echo "$mails"
557 }
558
559 get_target_arch() {
560         local target=$1
561
562         awk '$7 == "'$target'" { print $2 }' boards.cfg
563 }
564
565 list_target() {
566         if [ "$PRINT_MAINTS" != 'y' ] ; then
567                 echo "$1"
568                 return
569         fi
570
571         echo -n "$1:"
572
573         local loc=`get_target_location $1`
574
575         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
576
577         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
578
579         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
580
581                 local dir=`echo ${loc} | cut -d ":" -f 2`
582                 local cfg=`echo ${loc} | cut -d ":" -f 1`
583                 local git_result=`git log --format=%aE board/${dir} \
584                                 include/configs/${cfg}.h | grep "@"`
585                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
586                                                 head -n 3`
587                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
588                         sort | uniq -c | sort -nr | head -n 3 | \
589                         sed "s/^ \+[0-9]\+ \+//"`
590
591                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
592                         sort -u | tr "\n" " " | sed "s/ $//" ;
593         else
594                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
595                                                 sed "s/ $//" ;
596         fi
597
598         echo ""
599 }
600
601 # Each finished build will have a file called ${donep}${n},
602 # where n is the index of the build. Each build
603 # we've already noted as finished will have ${skipp}${n}.
604 # The code managing the build process will use this information
605 # to ensure that only BUILD_NBUILDS builds are in flight at once
606 donep="${LOG_DIR}/._done_"
607 skipp="${LOG_DIR}/._skip_"
608
609 build_target_killed() {
610         echo "Aborted $target build."
611         # Remove the logs for this board since it was aborted
612         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
613         exit
614 }
615
616 build_target() {
617         target=$1
618         build_idx=$2
619
620         if [ "$ONLY_LIST" == 'y' ] ; then
621                 list_target ${target}
622                 return
623         fi
624
625         if [ $BUILD_MANY == 1 ] ; then
626                 output_dir="${OUTPUT_PREFIX}/${target}"
627                 mkdir -p "${output_dir}"
628                 trap build_target_killed TERM
629         else
630                 output_dir="${OUTPUT_PREFIX}"
631         fi
632
633         target_arch=$(get_target_arch ${target})
634         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
635         if [ "${cross_toolchain}" ] ; then
636             MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
637         elif [ "${CROSS_COMPILE}" ] ; then
638             MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
639         else
640             MAKE=$GNU_MAKE
641         fi
642
643         if [  "${output_dir}" != "." ] ; then
644                 MAKE="${MAKE} O=${output_dir}"
645         fi
646
647         ${MAKE} mrproper >/dev/null
648
649         echo "Building ${target} board..."
650         ${MAKE} -s ${target}_defconfig >/dev/null
651
652         ${MAKE} ${JOBS} ${CHECK} all \
653                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
654
655         # Check for 'make' errors
656         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
657                 RC=1
658         fi
659
660         OBJS=${output_dir}/u-boot
661         if [ -e ${output_dir}/spl/u-boot-spl ]; then
662                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
663         fi
664
665         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
666
667         if [ $BUILD_MANY == 1 ] ; then
668                 trap - TERM
669
670                 ${MAKE} -s clean
671
672                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
673                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
674                 else
675                         rm ${LOG_DIR}/${target}.ERR
676                 fi
677         else
678                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
679                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
680                                 : $(( ERR_CNT += 1 ))
681                                 ERR_LIST="${ERR_LIST} $target"
682                         else
683                                 : $(( WRN_CNT += 1 ))
684                                 WRN_LIST="${WRN_LIST} $target"
685                         fi
686                 else
687                         rm ${LOG_DIR}/${target}.ERR
688                 fi
689         fi
690
691         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
692
693         touch "${donep}${build_idx}"
694 }
695
696 manage_builds() {
697         search_idx=${OLDEST_IDX}
698         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
699
700         while true; do
701                 if [ -e "${donep}${search_idx}" ] ; then
702                         : $(( CURRENT_CNT-- ))
703                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
704                                 : $(( OLDEST_IDX++ ))
705
706                         # Only want to count it once
707                         rm -f "${donep}${search_idx}"
708                         touch "${skipp}${search_idx}"
709                 elif [ -e "${skipp}${search_idx}" ] ; then
710                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
711                                 : $(( OLDEST_IDX++ ))
712                 fi
713                 : $(( search_idx++ ))
714                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
715                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
716                                 search_idx=${OLDEST_IDX}
717                                 sleep 1
718                         else
719                                 break
720                         fi
721                 fi
722         done
723 }
724
725 build_targets() {
726         for t in "$@" ; do
727                 # If a LIST_xxx var exists, use it.  But avoid variable
728                 # expansion in the eval when a board name contains certain
729                 # characters that the shell interprets.
730                 case ${t} in
731                         *[-+=]*) list= ;;
732                         *)       list=$(eval echo '${LIST_'$t'}') ;;
733                 esac
734                 if [ -n "${list}" ] ; then
735                         build_targets ${list}
736                 else
737                         : $((TOTAL_CNT += 1))
738                         : $((CURRENT_CNT += 1))
739                         rm -f "${donep}${TOTAL_CNT}"
740                         rm -f "${skipp}${TOTAL_CNT}"
741                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
742                                 : $((SKIP_CNT += 1))
743                                 touch "${donep}${TOTAL_CNT}"
744                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
745                                 : $((SKIP_CNT += 1))
746                                 touch "${donep}${TOTAL_CNT}"
747                         else
748                                 if [ $BUILD_MANY == 1 ] ; then
749                                         build_target ${t} ${TOTAL_CNT} &
750                                 else
751                                         CUR_TGT="${t}"
752                                         build_target ${t} ${TOTAL_CNT}
753                                         CUR_TGT=''
754                                 fi
755                         fi
756                 fi
757
758                 # We maintain a running count of all the builds we have done.
759                 # Each finished build will have a file called ${donep}${n},
760                 # where n is the index of the build. Each build
761                 # we've already noted as finished will have ${skipp}${n}.
762                 # We track the current index via TOTAL_CNT, and the oldest
763                 # index. When we exceed the maximum number of parallel builds,
764                 # We look from oldest to current for builds that have completed,
765                 # and update the current count and oldest index as appropriate.
766                 # If we've gone through the entire list, wait a second, and
767                 # reprocess the entire list until we find a build that has
768                 # completed
769                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
770                         manage_builds
771                 fi
772         done
773 }
774
775 #-----------------------------------------------------------------------
776
777 kill_children() {
778         local OS=$(uname -s)
779         local children=""
780         case "${OS}" in
781                 "Darwin")
782                         # Mac OS X is known to have BSD style ps
783                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
784                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
785                         ;;
786                 *)
787                         # everything else tries the GNU style
788                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
789                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
790                         ;;
791         esac
792
793         kill $children 2> /dev/null
794         wait $children 2> /dev/null
795
796         exit
797 }
798
799 print_stats() {
800         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
801
802         # Only count boards that completed
803         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
804
805         rm -f ${donep}* ${skipp}*
806
807         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
808                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
809                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
810                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
811                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
812                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
813                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
814         else
815                 # Remove the logs for any board that was interrupted
816                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
817         fi
818
819         : $((TOTAL_CNT -= ${SKIP_CNT}))
820         echo ""
821         echo "--------------------- SUMMARY ----------------------------"
822         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
823                 echo "Boards skipped: ${SKIP_CNT}"
824         fi
825         echo "Boards compiled: ${TOTAL_CNT}"
826         if [ ${ERR_CNT} -gt 0 ] ; then
827                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
828         fi
829         if [ ${WRN_CNT} -gt 0 ] ; then
830                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
831         fi
832         echo "----------------------------------------------------------"
833
834         if [ $BUILD_MANY == 1 ] ; then
835                 kill_children
836         fi
837
838         deprecation
839
840         exit $RC
841 }
842
843 #-----------------------------------------------------------------------
844
845 # Build target groups selected by options, plus any command line args
846 set -- ${SELECTED} "$@"
847 # run PowerPC by default
848 [ $# = 0 ] && set -- powerpc
849 build_targets "$@"
850 wait