git.sur5r.net Git - u-boot/blob - MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -l,        --list            List all targets to be built
  22           -m,        --maintainers     List all targets and maintainer email
  23           -M,        --mails           List all targets and all affilated emails
  24           -C,        --check           Enable build checking
  25           -n,        --continue        Continue (skip boards already built)
  26           -r,        --rebuild-errors  Rebuild any boards that errored
  27           -h,        --help            This help output
  28
  29         Selections by these options are logically ANDed; if the same option
  30         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  31         will select all configurations where the vendor is either FOO or
  32         BAR.  Any additional arguments specified on the command line are
  33         always build additionally.  See the boards.cfg file for more info.
  34
  35         If no boards are specified, then the default is "powerpc".
  36
  37         Environment variables:
  38           BUILD_NCPUS      number of parallel make jobs (default: auto)
  39           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  40           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  41                            architecture "ARCH".  Substitute "ARCH" for any
  42                            supported architecture (default: "")
  43           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  44           BUILD_DIR        output build directory (default: ./)
  45           BUILD_NBUILDS    number of parallel targets (default: 1)
  46
  47         Examples:
  48           - build all Power Architecture boards:
  49               MAKEALL -a powerpc
  50               MAKEALL --arch powerpc
  51               MAKEALL powerpc
  52           - build all PowerPC boards manufactured by vendor "esd":
  53               MAKEALL -a powerpc -v esd
  54           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  55               MAKEALL -a powerpc -v keymile -v siemens
  56           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  57               MAKEALL -c mpc83xx -v freescale 4xx
  58         EOF
  59         exit ${ret}
  60 }
  61
  62 SHORT_OPTS="ha:c:v:s:lmMCnr"
  63 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
  64
  65 # Option processing based on util-linux-2.13/getopt-parse.bash
  66
  67 # Note that we use `"$@"' to let each command-line parameter expand to a
  68 # separate word. The quotes around `$@' are essential!
  69 # We need TEMP as the `eval set --' would nuke the return value of
  70 # getopt.
  71 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  72      -n 'MAKEALL' -- "$@"`
  73
  74 [ $? != 0 ] && usage 1
  75
  76 # Note the quotes around `$TEMP': they are essential!
  77 eval set -- "$TEMP"
  78
  79 SELECTED=''
  80 ONLY_LIST=''
  81 PRINT_MAINTS=''
  82 MAINTAINERS_ONLY=''
  83 CONTINUE=''
  84 REBUILD_ERRORS=''
  85
  86 while true ; do
  87         case "$1" in
  88         -a|--arch)
  89                 # echo "Option ARCH: argument \`$2'"
  90                 if [ "$opt_a" ] ; then
  91                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  92                 else
  93                         opt_a="(\$2 == \"$2\")"
  94                 fi
  95                 SELECTED='y'
  96                 shift 2 ;;
  97         -c|--cpu)
  98                 # echo "Option CPU: argument \`$2'"
  99                 if [ "$opt_c" ] ; then
 100                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 101                 else
 102                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 103                 fi
 104                 SELECTED='y'
 105                 shift 2 ;;
 106         -s|--soc)
 107                 # echo "Option SoC: argument \`$2'"
 108                 if [ "$opt_s" ] ; then
 109                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 110                 else
 111                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 112                 fi
 113                 SELECTED='y'
 114                 shift 2 ;;
 115         -v|--vendor)
 116                 # echo "Option VENDOR: argument \`$2'"
 117                 if [ "$opt_v" ] ; then
 118                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 119                 else
 120                         opt_v="(\$5 == \"$2\")"
 121                 fi
 122                 SELECTED='y'
 123                 shift 2 ;;
 124         -C|--check)
 125                 CHECK='C=1'
 126                 shift ;;
 127         -n|--continue)
 128                 CONTINUE='y'
 129                 shift ;;
 130         -r|--rebuild-errors)
 131                 REBUILD_ERRORS='y'
 132                 shift ;;
 133         -l|--list)
 134                 ONLY_LIST='y'
 135                 shift ;;
 136         -m|--maintainers)
 137                 ONLY_LIST='y'
 138                 PRINT_MAINTS='y'
 139                 MAINTAINERS_ONLY='y'
 140                 shift ;;
 141         -M|--mails)
 142                 ONLY_LIST='y'
 143                 PRINT_MAINTS='y'
 144                 shift ;;
 145         -h|--help)
 146                 usage ;;
 147         --)
 148                 shift ; break ;;
 149         *)
 150                 echo "Internal error!" >&2 ; exit 1 ;;
 151         esac
 152 done
 153 # echo "Remaining arguments:"
 154 # for arg do echo '--> '"\`$arg'" ; done
 155
 156 FILTER="\$1 !~ /^#/"
 157 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 158 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 159 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 160 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 161
 162 if [ "$SELECTED" ] ; then
 163         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 164
 165         # Make sure some boards from boards.cfg are actually found
 166         if [ -z "$SELECTED" ] ; then
 167                 echo "Error: No boards selected, invalid arguments"
 168                 exit 1
 169         fi
 170 fi
 171
 172 #########################################################################
 173
 174 # Print statistics when we exit
 175 trap exit 1 2 3 15
 176 trap print_stats 0
 177
 178 # Determine number of CPU cores if no default was set
 179 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 180
 181 if [ "$BUILD_NCPUS" -gt 1 ]
 182 then
 183         JOBS="-j $((BUILD_NCPUS + 1))"
 184 else
 185         JOBS=""
 186 fi
 187
 188 if [ "${MAKEALL_LOGDIR}" ] ; then
 189         LOG_DIR=${MAKEALL_LOGDIR}
 190 else
 191         LOG_DIR="LOG"
 192 fi
 193
 194 : ${BUILD_NBUILDS:=1}
 195 BUILD_MANY=0
 196
 197 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 198         BUILD_MANY=1
 199         : ${BUILD_DIR:=./build}
 200         mkdir -p "${BUILD_DIR}/ERR"
 201         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 202 fi
 203
 204 : ${BUILD_DIR:=.}
 205
 206 OUTPUT_PREFIX="${BUILD_DIR}"
 207
 208 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 209 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 210         find "${LOG_DIR}/" -type f -exec rm -f {} +
 211 fi
 212
 213 LIST=""
 214
 215 # Keep track of the number of builds and errors
 216 ERR_CNT=0
 217 ERR_LIST=""
 218 WRN_CNT=0
 219 WRN_LIST=""
 220 TOTAL_CNT=0
 221 SKIP_CNT=0
 222 CURRENT_CNT=0
 223 OLDEST_IDX=1
 224 RC=0
 225
 226 # Helper funcs for parsing boards.cfg
 227 boards_by_field()
 228 {
 229         FS="[ \t]+"
 230         [ -n "$3" ] && FS="$3"
 231         awk \
 232                 -v field="$1" \
 233                 -v select="$2" \
 234                 -F "$FS" \
 235                 '($1 !~ /^#/ && $field == select) { print $7 }' \
 236                 boards.cfg
 237 }
 238 boards_by_arch() { boards_by_field 2 "$@" ; }
 239 boards_by_cpu()  { boards_by_field 3 "$@" "[: \t]+" ; }
 240 boards_by_soc()  { boards_by_field 4 "$@" ; }
 241
 242 #########################################################################
 243 ## MPC5xx Systems
 244 #########################################################################
 245
 246 LIST_5xx="$(boards_by_cpu mpc5xx)"
 247
 248 #########################################################################
 249 ## MPC5xxx Systems
 250 #########################################################################
 251
 252 LIST_5xxx="$(boards_by_cpu mpc5xxx)"
 253
 254 #########################################################################
 255 ## MPC512x Systems
 256 #########################################################################
 257
 258 LIST_512x="$(boards_by_cpu mpc512x)"
 259
 260 #########################################################################
 261 ## MPC8xx Systems
 262 #########################################################################
 263
 264 LIST_8xx="$(boards_by_cpu mpc8xx)"
 265
 266 #########################################################################
 267 ## PPC4xx Systems
 268 #########################################################################
 269
 270 LIST_4xx="$(boards_by_cpu ppc4xx)"
 271
 272 #########################################################################
 273 ## MPC824x Systems
 274 #########################################################################
 275
 276 LIST_824x="$(boards_by_cpu mpc824x)"
 277
 278 #########################################################################
 279 ## MPC8260 Systems (includes 8250, 8255 etc.)
 280 #########################################################################
 281
 282 LIST_8260="$(boards_by_cpu mpc8260)"
 283
 284 #########################################################################
 285 ## MPC83xx Systems (includes 8349, etc.)
 286 #########################################################################
 287
 288 LIST_83xx="$(boards_by_cpu mpc83xx)"
 289
 290 #########################################################################
 291 ## MPC85xx Systems (includes 8540, 8560 etc.)
 292 #########################################################################
 293
 294 LIST_85xx="$(boards_by_cpu mpc85xx)"
 295
 296 #########################################################################
 297 ## MPC86xx Systems
 298 #########################################################################
 299
 300 LIST_86xx="$(boards_by_cpu mpc86xx)"
 301
 302 #########################################################################
 303 ## 74xx/7xx Systems
 304 #########################################################################
 305
 306 LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
 307
 308 #########################################################################
 309 ## PowerPC groups
 310 #########################################################################
 311
 312 LIST_TSEC="             \
 313         ${LIST_83xx}    \
 314         ${LIST_85xx}    \
 315         ${LIST_86xx}    \
 316 "
 317
 318 LIST_powerpc="          \
 319         ${LIST_5xx}     \
 320         ${LIST_512x}    \
 321         ${LIST_5xxx}    \
 322         ${LIST_8xx}     \
 323         ${LIST_824x}    \
 324         ${LIST_8260}    \
 325         ${LIST_83xx}    \
 326         ${LIST_85xx}    \
 327         ${LIST_86xx}    \
 328         ${LIST_4xx}     \
 329         ${LIST_74xx_7xx}\
 330 "
 331
 332 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 333 # still using "ppc" instead of "powerpc"
 334 LIST_ppc="              \
 335         ${LIST_powerpc} \
 336 "
 337
 338 #########################################################################
 339 ## StrongARM Systems
 340 #########################################################################
 341
 342 LIST_SA="$(boards_by_cpu sa1100)"
 343
 344 #########################################################################
 345 ## ARM7 Systems
 346 #########################################################################
 347
 348 LIST_ARM7="$(boards_by_cpu arm720t)"
 349
 350 #########################################################################
 351 ## ARM9 Systems
 352 #########################################################################
 353
 354 LIST_ARM9="$(boards_by_cpu arm920t)     \
 355         $(boards_by_cpu arm926ejs)      \
 356         $(boards_by_cpu arm946es)       \
 357 "
 358
 359 #########################################################################
 360 ## ARM11 Systems
 361 #########################################################################
 362 LIST_ARM11="$(boards_by_cpu arm1136)    \
 363         $(boards_by_cpu arm1176)        \
 364 "
 365
 366 #########################################################################
 367 ## ARMV7 Systems
 368 #########################################################################
 369
 370 LIST_ARMV7="$(boards_by_cpu armv7)"
 371
 372 #########################################################################
 373 ## AT91 Systems
 374 #########################################################################
 375
 376 LIST_at91="$(boards_by_soc at91)"
 377
 378 #########################################################################
 379 ## Xscale Systems
 380 #########################################################################
 381
 382 LIST_pxa="$(boards_by_cpu pxa)"
 383
 384 LIST_ixp="$(boards_by_cpu ixp)"
 385
 386 #########################################################################
 387 ## SPEAr Systems
 388 #########################################################################
 389
 390 LIST_spear="$(boards_by_soc spear)"
 391
 392 #########################################################################
 393 ## ARM groups
 394 #########################################################################
 395
 396 LIST_arm="$(boards_by_arch arm)"
 397
 398 #########################################################################
 399 ## MIPS Systems         (default = big endian)
 400 #########################################################################
 401
 402 LIST_mips4kc="          \
 403         incaip          \
 404         incaip_100MHz   \
 405         incaip_133MHz   \
 406         incaip_150MHz   \
 407         qemu_mips       \
 408         vct_platinum    \
 409         vct_platinum_small      \
 410         vct_platinum_onenand    \
 411         vct_platinum_onenand_small      \
 412         vct_platinumavc \
 413         vct_platinumavc_small   \
 414         vct_platinumavc_onenand \
 415         vct_platinumavc_onenand_small   \
 416         vct_premium     \
 417         vct_premium_small       \
 418         vct_premium_onenand     \
 419         vct_premium_onenand_small       \
 420 "
 421
 422 LIST_au1xx0="           \
 423         dbau1000        \
 424         dbau1100        \
 425         dbau1500        \
 426         dbau1550        \
 427 "
 428
 429 LIST_mips="             \
 430         ${LIST_mips4kc} \
 431         ${LIST_mips5kc} \
 432         ${LIST_au1xx0}  \
 433 "
 434
 435 #########################################################################
 436 ## MIPS Systems         (little endian)
 437 #########################################################################
 438
 439 LIST_au1xx0_el="        \
 440         dbau1550_el     \
 441         pb1000          \
 442 "
 443 LIST_mips_el="                  \
 444         ${LIST_au1xx0_el}       \
 445 "
 446 #########################################################################
 447 ## OpenRISC Systems
 448 #########################################################################
 449
 450 LIST_openrisc="$(boards_by_arch openrisc)"
 451
 452 #########################################################################
 453 ## x86 Systems
 454 #########################################################################
 455
 456 LIST_x86="$(boards_by_arch x86)"
 457
 458 #########################################################################
 459 ## Nios-II Systems
 460 #########################################################################
 461
 462 LIST_nios2="$(boards_by_arch nios2)"
 463
 464 #########################################################################
 465 ## MicroBlaze Systems
 466 #########################################################################
 467
 468 LIST_microblaze="$(boards_by_arch microblaze)"
 469
 470 #########################################################################
 471 ## ColdFire Systems
 472 #########################################################################
 473
 474 LIST_m68k="$(boards_by_arch m68k)"
 475 LIST_coldfire=${LIST_m68k}
 476
 477 #########################################################################
 478 ## AVR32 Systems
 479 #########################################################################
 480
 481 LIST_avr32="$(boards_by_arch avr32)"
 482
 483 #########################################################################
 484 ## Blackfin Systems
 485 #########################################################################
 486
 487 LIST_blackfin="$(boards_by_arch blackfin)"
 488
 489 #########################################################################
 490 ## SH Systems
 491 #########################################################################
 492
 493 LIST_sh2="$(boards_by_cpu sh2)"
 494 LIST_sh3="$(boards_by_cpu sh3)"
 495 LIST_sh4="$(boards_by_cpu sh4)"
 496
 497 LIST_sh="$(boards_by_arch sh)"
 498
 499 #########################################################################
 500 ## SPARC Systems
 501 #########################################################################
 502
 503 LIST_sparc="$(boards_by_arch sparc)"
 504
 505 #########################################################################
 506 ## NDS32 Systems
 507 #########################################################################
 508
 509 LIST_nds32="$(boards_by_arch nds32)"
 510
 511 #-----------------------------------------------------------------------
 512
 513 get_target_location() {
 514         local target=$1
 515         local BOARD_NAME=""
 516         local CONFIG_NAME=""
 517         local board=""
 518         local vendor=""
 519
 520         # Automatic mode
 521         local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 522         if [ -z "${line}" ] ; then echo "" ; return ; fi
 523
 524         set ${line}
 525
 526         CONFIG_NAME="${7%_config}"
 527
 528         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 529
 530         if [ $# -gt 5 ]; then
 531                 if [ "$6" = "-" ] ; then
 532                         board=${BOARD_NAME}
 533                 else
 534                         board="$6"
 535                 fi
 536         fi
 537
 538         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 539         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 540                 tmp="${8%:*}"
 541                 if [ "$tmp" ] ; then
 542                         CONFIG_NAME="$tmp"
 543                 fi
 544         }
 545
 546         # Assign board directory to BOARDIR variable
 547         if [ "${vendor}" == "-" ] ; then
 548             BOARDDIR=${board}
 549         else
 550             BOARDDIR=${vendor}/${board}
 551         fi
 552
 553         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 554 }
 555
 556 get_target_maintainers() {
 557         local name=`echo $1 | cut -d : -f 3`
 558
 559         local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 560         if [ -z "${line}" ]; then
 561                 echo ""
 562                 return ;
 563         fi
 564
 565         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 566         [ "$mails" == "-" ] && mails=""
 567         echo "$mails"
 568 }
 569
 570 get_target_arch() {
 571         local target=$1
 572
 573         # Automatic mode
 574         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
 575
 576         if [ -z "${line}" ] ; then echo "" ; return ; fi
 577
 578         set ${line}
 579         echo "$2"
 580 }
 581
 582 list_target() {
 583         if [ "$PRINT_MAINTS" != 'y' ] ; then
 584                 echo "$1"
 585                 return
 586         fi
 587
 588         echo -n "$1:"
 589
 590         local loc=`get_target_location $1`
 591
 592         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 593
 594         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 595
 596         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 597
 598                 local dir=`echo ${loc} | cut -d ":" -f 2`
 599                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 600                 local git_result=`git log --format=%aE board/${dir} \
 601                                 include/configs/${cfg}.h | grep "@"`
 602                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 603                                                 head -n 3`
 604                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 605                         sort | uniq -c | sort -nr | head -n 3 | \
 606                         sed "s/^ \+[0-9]\+ \+//"`
 607
 608                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 609                         sort -u | tr "\n" " " | sed "s/ $//" ;
 610         else
 611                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 612                                                 sed "s/ $//" ;
 613         fi
 614
 615         echo ""
 616 }
 617
 618 # Each finished build will have a file called ${donep}${n},
 619 # where n is the index of the build. Each build
 620 # we've already noted as finished will have ${skipp}${n}.
 621 # The code managing the build process will use this information
 622 # to ensure that only BUILD_NBUILDS builds are in flight at once
 623 donep="${LOG_DIR}/._done_"
 624 skipp="${LOG_DIR}/._skip_"
 625
 626 build_target_killed() {
 627         echo "Aborted $target build."
 628         # Remove the logs for this board since it was aborted
 629         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 630         exit
 631 }
 632
 633 build_target() {
 634         target=$1
 635         build_idx=$2
 636
 637         if [ "$ONLY_LIST" == 'y' ] ; then
 638                 list_target ${target}
 639                 return
 640         fi
 641
 642         if [ $BUILD_MANY == 1 ] ; then
 643                 output_dir="${OUTPUT_PREFIX}/${target}"
 644                 mkdir -p "${output_dir}"
 645                 trap build_target_killed TERM
 646         else
 647                 output_dir="${OUTPUT_PREFIX}"
 648         fi
 649
 650         export BUILD_DIR="${output_dir}"
 651
 652         target_arch=$(get_target_arch ${target})
 653         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 654         if [ "${cross_toolchain}" ] ; then
 655             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 656         elif [ "${CROSS_COMPILE}" ] ; then
 657             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 658         else
 659             MAKE=make
 660         fi
 661
 662         ${MAKE} distclean >/dev/null
 663         ${MAKE} -s ${target}_config
 664
 665         ${MAKE} ${JOBS} ${CHECK} all \
 666                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 667
 668         # Check for 'make' errors
 669         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 670                 RC=1
 671         fi
 672
 673         if [ $BUILD_MANY == 1 ] ; then
 674                 trap - TERM
 675
 676                 ${MAKE} -s tidy
 677
 678                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 679                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 680                 else
 681                         rm ${LOG_DIR}/${target}.ERR
 682                 fi
 683         else
 684                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 685                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 686                                 : $(( ERR_CNT += 1 ))
 687                                 ERR_LIST="${ERR_LIST} $target"
 688                         else
 689                                 : $(( WRN_CNT += 1 ))
 690                                 WRN_LIST="${WRN_LIST} $target"
 691                         fi
 692                 else
 693                         rm ${LOG_DIR}/${target}.ERR
 694                 fi
 695         fi
 696
 697         OBJS=${output_dir}/u-boot
 698         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 699                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 700         fi
 701
 702         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 703
 704         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 705
 706         touch "${donep}${build_idx}"
 707 }
 708
 709 manage_builds() {
 710         search_idx=${OLDEST_IDX}
 711         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 712
 713         while true; do
 714                 if [ -e "${donep}${search_idx}" ] ; then
 715                         : $(( CURRENT_CNT-- ))
 716                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 717                                 : $(( OLDEST_IDX++ ))
 718
 719                         # Only want to count it once
 720                         rm -f "${donep}${search_idx}"
 721                         touch "${skipp}${search_idx}"
 722                 elif [ -e "${skipp}${search_idx}" ] ; then
 723                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 724                                 : $(( OLDEST_IDX++ ))
 725                 fi
 726                 : $(( search_idx++ ))
 727                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 728                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 729                                 search_idx=${OLDEST_IDX}
 730                                 sleep 1
 731                         else
 732                                 break
 733                         fi
 734                 fi
 735         done
 736 }
 737
 738 build_targets() {
 739         for t in "$@" ; do
 740                 # If a LIST_xxx var exists, use it.  But avoid variable
 741                 # expansion in the eval when a board name contains certain
 742                 # characters that the shell interprets.
 743                 case ${t} in
 744                         *[-+=]*) list= ;;
 745                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 746                 esac
 747                 if [ -n "${list}" ] ; then
 748                         build_targets ${list}
 749                 else
 750                         : $((TOTAL_CNT += 1))
 751                         : $((CURRENT_CNT += 1))
 752                         rm -f "${donep}${TOTAL_CNT}"
 753                         rm -f "${skipp}${TOTAL_CNT}"
 754                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 755                                 : $((SKIP_CNT += 1))
 756                                 touch "${donep}${TOTAL_CNT}"
 757                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 758                                 : $((SKIP_CNT += 1))
 759                                 touch "${donep}${TOTAL_CNT}"
 760                         else
 761                                 if [ $BUILD_MANY == 1 ] ; then
 762                                         build_target ${t} ${TOTAL_CNT} &
 763                                 else
 764                                         CUR_TGT="${t}"
 765                                         build_target ${t} ${TOTAL_CNT}
 766                                         CUR_TGT=''
 767                                 fi
 768                         fi
 769                 fi
 770
 771                 # We maintain a running count of all the builds we have done.
 772                 # Each finished build will have a file called ${donep}${n},
 773                 # where n is the index of the build. Each build
 774                 # we've already noted as finished will have ${skipp}${n}.
 775                 # We track the current index via TOTAL_CNT, and the oldest
 776                 # index. When we exceed the maximum number of parallel builds,
 777                 # We look from oldest to current for builds that have completed,
 778                 # and update the current count and oldest index as appropriate.
 779                 # If we've gone through the entire list, wait a second, and
 780                 # reprocess the entire list until we find a build that has
 781                 # completed
 782                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 783                         manage_builds
 784                 fi
 785         done
 786 }
 787
 788 #-----------------------------------------------------------------------
 789
 790 kill_children() {
 791         local OS=$(uname -s)
 792         local children=""
 793         case "${OS}" in
 794                 "Darwin")
 795                         # Mac OS X is known to have BSD style ps
 796                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 797                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 798                         ;;
 799                 *)
 800                         # everything else tries the GNU style
 801                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 802                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 803                         ;;
 804         esac
 805
 806         kill $children 2> /dev/null
 807         wait $children 2> /dev/null
 808
 809         exit
 810 }
 811
 812 print_stats() {
 813         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 814
 815         # Only count boards that completed
 816         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 817
 818         rm -f ${donep}* ${skipp}*
 819
 820         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 821                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 822                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 823                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 824                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 825                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 826                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 827         else
 828                 # Remove the logs for any board that was interrupted
 829                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 830         fi
 831
 832         : $((TOTAL_CNT -= ${SKIP_CNT}))
 833         echo ""
 834         echo "--------------------- SUMMARY ----------------------------"
 835         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 836                 echo "Boards skipped: ${SKIP_CNT}"
 837         fi
 838         echo "Boards compiled: ${TOTAL_CNT}"
 839         if [ ${ERR_CNT} -gt 0 ] ; then
 840                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 841         fi
 842         if [ ${WRN_CNT} -gt 0 ] ; then
 843                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 844         fi
 845         echo "----------------------------------------------------------"
 846
 847         if [ $BUILD_MANY == 1 ] ; then
 848                 kill_children
 849         fi
 850
 851         exit $RC
 852 }
 853
 854 #-----------------------------------------------------------------------
 855
 856 # Build target groups selected by options, plus any command line args
 857 set -- ${SELECTED} "$@"
 858 # run PowerPC by default
 859 [ $# = 0 ] && set -- powerpc
 860 build_targets "$@"
 861 wait