1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
12 config DMA_ADDR_T_64BIT
22 # If set, the workarounds for these ARM errata are applied early during U-Boot
23 # startup. Note that in general these options force the workarounds to be
24 # applied; no CPU-type/version detection exists, unlike the similar options in
25 # the Linux kernel. Do not set these options unless they apply! Also note that
26 # the following can be machine specific errata. These do have ability to
27 # provide rudimentary version and machine specific checks, but expect no
29 # CONFIG_ARM_ERRATA_430973
30 # CONFIG_ARM_ERRATA_454179
31 # CONFIG_ARM_ERRATA_621766
32 # CONFIG_ARM_ERRATA_798870
33 # CONFIG_ARM_ERRATA_801819
34 config ARM_ERRATA_430973
37 config ARM_ERRATA_454179
40 config ARM_ERRATA_621766
43 config ARM_ERRATA_716044
46 config ARM_ERRATA_725233
49 config ARM_ERRATA_742230
52 config ARM_ERRATA_743622
55 config ARM_ERRATA_751472
58 config ARM_ERRATA_761320
61 config ARM_ERRATA_773022
64 config ARM_ERRATA_774769
67 config ARM_ERRATA_794072
70 config ARM_ERRATA_798870
73 config ARM_ERRATA_801819
76 config ARM_ERRATA_826974
79 config ARM_ERRATA_828024
82 config ARM_ERRATA_829520
85 config ARM_ERRATA_833069
88 config ARM_ERRATA_833471
93 select SYS_CACHE_SHIFT_5
97 select SYS_CACHE_SHIFT_5
101 select SYS_CACHE_SHIFT_5
105 select SYS_CACHE_SHIFT_5
109 select SYS_CACHE_SHIFT_5
114 select SYS_CACHE_SHIFT_5
120 select SYS_CACHE_SHIFT_6
125 select SYS_CACHE_SHIFT_5
129 select SYS_CACHE_SHIFT_5
133 select SYS_CACHE_SHIFT_5
136 default "arm720t" if CPU_ARM720T
137 default "arm920t" if CPU_ARM920T
138 default "arm926ejs" if CPU_ARM926EJS
139 default "arm946es" if CPU_ARM946ES
140 default "arm1136" if CPU_ARM1136
141 default "arm1176" if CPU_ARM1176
142 default "armv7" if CPU_V7
143 default "armv7m" if CPU_V7M
144 default "pxa" if CPU_PXA
145 default "sa1100" if CPU_SA1100
146 default "armv8" if ARM64
150 default 4 if CPU_ARM720T
151 default 4 if CPU_ARM920T
152 default 5 if CPU_ARM926EJS
153 default 5 if CPU_ARM946ES
154 default 6 if CPU_ARM1136
155 default 6 if CPU_ARM1176
159 default 4 if CPU_SA1100
162 config SYS_CACHE_SHIFT_5
165 config SYS_CACHE_SHIFT_6
168 config SYS_CACHE_SHIFT_7
171 config SYS_CACHELINE_SIZE
173 default 128 if SYS_CACHE_SHIFT_7
174 default 64 if SYS_CACHE_SHIFT_6
175 default 32 if SYS_CACHE_SHIFT_5
178 bool "Support for ARM SMC Calling Convention (SMCCC)"
179 depends on CPU_V7 || ARM64
182 Say Y here if you want to enable ARM SMC Calling Convention.
183 This should be enabled if U-Boot needs to communicate with system
184 firmware (for example, PSCI) according to SMCCC.
187 bool "support boot from semihosting"
189 In emulated environments, semihosting is a way for
190 the hosted environment to call out to the emulator to
191 retrieve files from the host machine.
193 config SYS_THUMB_BUILD
194 bool "Build U-Boot using the Thumb instruction set"
197 Use this flag to build U-Boot using the Thumb instruction set for
198 ARM architectures. Thumb instruction set provides better code
199 density. For ARM architectures that support Thumb2 this flag will
200 result in Thumb2 code generated by GCC.
202 config SPL_SYS_THUMB_BUILD
203 bool "Build SPL using the Thumb instruction set"
204 default y if SYS_THUMB_BUILD
207 Use this flag to build SPL using the Thumb instruction set for
208 ARM architectures. Thumb instruction set provides better code
209 density. For ARM architectures that support Thumb2 this flag will
210 result in Thumb2 code generated by GCC.
212 config SYS_L2CACHE_OFF
215 If SoC does not support L2CACHE or one do not want to enable
216 L2CACHE, choose this option.
218 config ENABLE_ARM_SOC_BOOT0_HOOK
219 bool "prepare BOOT0 header"
221 If the SoC's BOOT0 requires a header area filled with (magic)
222 values, then choose this option, and create a define called
223 ARM_SOC_BOOT0_HOOK which contains the required assembler
226 config ARM_CORTEX_CPU_IS_UP
230 config USE_ARCH_MEMCPY
231 bool "Use an assembly optimized implementation of memcpy"
235 Enable the generation of an optimized version of memcpy.
236 Such implementation may be faster under some conditions
237 but may increase the binary size.
239 config SPL_USE_ARCH_MEMCPY
240 bool "Use an assembly optimized implementation of memcpy"
241 default y if USE_ARCH_MEMCPY
244 Enable the generation of an optimized version of memcpy.
245 Such implementation may be faster under some conditions
246 but may increase the binary size.
248 config USE_ARCH_MEMSET
249 bool "Use an assembly optimized implementation of memset"
253 Enable the generation of an optimized version of memset.
254 Such implementation may be faster under some conditions
255 but may increase the binary size.
257 config SPL_USE_ARCH_MEMSET
258 bool "Use an assembly optimized implementation of memset"
259 default y if USE_ARCH_MEMSET
262 Enable the generation of an optimized version of memset.
263 Such implementation may be faster under some conditions
264 but may increase the binary size.
266 config ARM64_SUPPORT_AARCH32
267 bool "ARM64 system support AArch32 execution state"
268 default y if ARM64 && !TARGET_THUNDERX_88XX
270 This ARM64 system supports AArch32 execution state.
273 prompt "Target select"
279 config TARGET_EDB93XX
280 bool "Support edb93xx"
283 config TARGET_ASPENITE
284 bool "Support aspenite"
288 bool "Support gplugd"
295 Support for TI's DaVinci platform.
298 bool "Marvell Kirkwood"
300 select BOARD_EARLY_INIT_F
301 select ARCH_MISC_INIT
304 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
313 config TARGET_DEVKIT3250
314 bool "Support devkit3250"
318 config TARGET_WORK_92105
319 bool "Support work_92105"
323 config TARGET_MX25PDK
324 bool "Support mx25pdk"
325 select BOARD_LATE_INIT
327 select BOARD_EARLY_INIT_F
331 select BOARD_LATE_INIT
339 config TARGET_APX4DEVKIT
340 bool "Support apx4devkit"
350 bool "Support m28evk"
354 config TARGET_MX23EVK
355 bool "Support mx23evk"
358 select BOARD_EARLY_INIT_F
360 config TARGET_MX28EVK
361 bool "Support mx28evk"
364 select BOARD_EARLY_INIT_F
366 config TARGET_MX23_OLINUXINO
367 bool "Support mx23_olinuxino"
370 select BOARD_EARLY_INIT_F
373 bool "Support bg0900"
377 config TARGET_SANSA_FUZE_PLUS
378 bool "Support sansa_fuze_plus"
382 config TARGET_SC_SPS_1
383 bool "Support sc_sps_1"
391 config TARGET_SPEAR300
392 bool "Support spear300"
394 select BOARD_EARLY_INIT_F
396 config TARGET_SPEAR310
397 bool "Support spear310"
399 select BOARD_EARLY_INIT_F
401 config TARGET_SPEAR320
402 bool "Support spear320"
404 select BOARD_EARLY_INIT_F
406 config TARGET_SPEAR600
407 bool "Support spear600"
409 select BOARD_EARLY_INIT_F
411 config TARGET_STV0991
412 bool "Support stv0991"
422 select BOARD_LATE_INIT
426 config TARGET_IMX31_PHYCORE
427 bool "Support imx31_phycore_eet"
429 select BOARD_EARLY_INIT_F
431 config TARGET_IMX31_PHYCORE_EET
432 bool "Support imx31_phycore_eet"
433 select BOARD_LATE_INIT
435 select BOARD_EARLY_INIT_F
437 config TARGET_MX31ADS
438 bool "Support mx31ads"
440 select BOARD_EARLY_INIT_F
442 config TARGET_MX31PDK
443 bool "Support mx31pdk"
444 select BOARD_LATE_INIT
447 select BOARD_EARLY_INIT_F
449 config TARGET_WOODBURN
450 bool "Support woodburn"
453 config TARGET_WOODBURN_SD
454 bool "Support woodburn_sd"
462 config TARGET_MX35PDK
463 bool "Support mx35pdk"
464 select BOARD_LATE_INIT
468 bool "Broadcom BCM283X family"
474 config TARGET_VEXPRESS_CA15_TC2
475 bool "Support vexpress_ca15_tc2"
477 select CPU_V7_HAS_NONSEC
478 select CPU_V7_HAS_VIRT
480 config TARGET_VEXPRESS_CA5X2
481 bool "Support vexpress_ca5x2"
484 config TARGET_VEXPRESS_CA9X4
485 bool "Support vexpress_ca9x4"
488 config TARGET_BCM23550_W1D
489 bool "Support bcm23550_w1d"
492 config TARGET_BCM28155_AP
493 bool "Support bcm28155_ap"
496 config TARGET_BCMCYGNUS
497 bool "Support bcmcygnus"
501 bool "Support bcmnsp"
505 bool "Support Broadcom Northstar2"
508 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
509 ARMv8 Cortex-A57 processors targeting a broad range of networking
513 bool "Samsung EXYNOS"
523 bool "Samsung S5PC1XX"
531 bool "Calxeda Highbank"
534 config ARCH_INTEGRATOR
535 bool "ARM Ltd. Integrator family"
543 select SYS_THUMB_BUILD
547 config ARCH_OMAP2PLUS
556 Support for the Meson SoC family developed by Amlogic Inc.,
557 targeted at media players and tablet computers. We currently
558 support the S905 (GXBaby) 64-bit SoC.
563 select ROM_UNIFIED_SECTIONS
568 select SYS_FSL_HAS_SEC if SECURE_BOOT
569 select SYS_FSL_SEC_COMPAT_4
570 select SYS_FSL_SEC_LE
571 select BOARD_EARLY_INIT_F
572 select ARCH_MISC_INIT
577 select SYS_FSL_HAS_SEC if SECURE_BOOT
578 select SYS_FSL_SEC_COMPAT_4
579 select SYS_FSL_SEC_LE
580 select SYS_THUMB_BUILD if SPL
585 select BOARD_EARLY_INIT_F
588 bool "Renesas ARM SoCs"
591 select BOARD_EARLY_INIT_F
592 imply SYS_THUMB_BUILD
594 config TARGET_S32V234EVB
595 bool "Support s32v234evb"
597 select SYS_FSL_ERRATUM_ESDHC111
599 config ARCH_SNAPDRAGON
600 bool "Qualcomm Snapdragon SoCs"
610 bool "Altera SOCFPGA family"
614 select SPL_OF_CONTROL
618 select ENABLE_ARM_SOC_BOOT0_HOOK
619 select ARCH_EARLY_INIT_R
620 select ARCH_MISC_INIT
621 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
622 select SYS_THUMB_BUILD
625 bool "Support sunxi (Allwinner) SoCs"
627 select CMD_MMC if MMC
628 select CMD_USB if DISTRO_DEFAULTS
634 select DM_USB if DISTRO_DEFAULTS
635 select OF_BOARD_SETUP
638 select SPL_STACK_R if SUPPORT_SPL
639 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
641 select SPL_SYS_THUMB_BUILD if !ARM64
642 select USB if DISTRO_DEFAULTS
643 select USB_STORAGE if DISTRO_DEFAULTS
644 select USB_KEYBOARD if DISTRO_DEFAULTS
645 select USE_TINY_PRINTF
648 bool "Support TS4600"
653 bool "Freescale Vybrid"
655 select SYS_FSL_ERRATUM_ESDHC111
658 bool "Xilinx Zynq Platform"
659 select BOARD_LATE_INIT
663 select SPL_OF_CONTROL if SPL
673 select SPL_SEPARATE_BSS if SPL
681 bool "Support Xilinx ZynqMP Platform"
683 select BOARD_LATE_INIT
695 config TARGET_VEXPRESS64_AEMV8A
696 bool "Support vexpress_aemv8a"
699 config TARGET_VEXPRESS64_BASE_FVP
700 bool "Support Versatile Express ARMv8a FVP BASE model"
704 config TARGET_VEXPRESS64_BASE_FVP_DRAM
705 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
708 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
709 the default config to allow the user to load the images directly into
710 DRAM using model parameters rather than by using semi-hosting to load
711 the files from the host filesystem.
713 config TARGET_VEXPRESS64_JUNO
714 bool "Support Versatile Express Juno Development Platform"
717 config TARGET_LS2080A_EMU
718 bool "Support ls2080a_emu"
721 select ARMV8_MULTIENTRY
722 select ARCH_MISC_INIT
724 Support for Freescale LS2080A_EMU platform
725 The LS2080A Development System (EMULATOR) is a pre silicon
726 development platform that supports the QorIQ LS2080A
727 Layerscape Architecture processor.
729 config TARGET_LS2080A_SIMU
730 bool "Support ls2080a_simu"
733 select ARMV8_MULTIENTRY
734 select ARCH_MISC_INIT
736 Support for Freescale LS2080A_SIMU platform
737 The LS2080A Development System (QDS) is a pre silicon
738 development platform that supports the QorIQ LS2080A
739 Layerscape Architecture processor.
741 config TARGET_LS2080AQDS
742 bool "Support ls2080aqds"
745 select ARMV8_MULTIENTRY
746 select BOARD_LATE_INIT
748 select ARCH_MISC_INIT
750 Support for Freescale LS2080AQDS platform
751 The LS2080A Development System (QDS) is a high-performance
752 development platform that supports the QorIQ LS2080A
753 Layerscape Architecture processor.
755 config TARGET_LS2080ARDB
756 bool "Support ls2080ardb"
759 select ARMV8_MULTIENTRY
760 select BOARD_LATE_INIT
762 select ARCH_MISC_INIT
764 Support for Freescale LS2080ARDB platform.
765 The LS2080A Reference design board (RDB) is a high-performance
766 development platform that supports the QorIQ LS2080A
767 Layerscape Architecture processor.
770 bool "Support HiKey 96boards Consumer Edition Platform"
777 Support for HiKey 96boards platform. It features a HI6220
778 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
780 config TARGET_LS1012AQDS
781 bool "Support ls1012aqds"
784 select BOARD_LATE_INIT
786 Support for Freescale LS1012AQDS platform.
787 The LS1012A Development System (QDS) is a high-performance
788 development platform that supports the QorIQ LS1012A
789 Layerscape Architecture processor.
791 config TARGET_LS1012ARDB
792 bool "Support ls1012ardb"
795 select BOARD_LATE_INIT
797 Support for Freescale LS1012ARDB platform.
798 The LS1012A Reference design board (RDB) is a high-performance
799 development platform that supports the QorIQ LS1012A
800 Layerscape Architecture processor.
802 config TARGET_LS1012AFRDM
803 bool "Support ls1012afrdm"
807 Support for Freescale LS1012AFRDM platform.
808 The LS1012A Freedom board (FRDM) is a high-performance
809 development platform that supports the QorIQ LS1012A
810 Layerscape Architecture processor.
812 config TARGET_LS1021AQDS
813 bool "Support ls1021aqds"
814 select BOARD_LATE_INIT
816 select CPU_V7_HAS_NONSEC
817 select CPU_V7_HAS_VIRT
820 select ARCH_SUPPORT_PSCI
821 select LS1_DEEP_SLEEP
823 select BOARD_EARLY_INIT_F
825 config TARGET_LS1021ATWR
826 bool "Support ls1021atwr"
827 select BOARD_LATE_INIT
829 select CPU_V7_HAS_NONSEC
830 select CPU_V7_HAS_VIRT
833 select ARCH_SUPPORT_PSCI
834 select LS1_DEEP_SLEEP
835 select BOARD_EARLY_INIT_F
837 config TARGET_LS1021AIOT
838 bool "Support ls1021aiot"
839 select BOARD_LATE_INIT
841 select CPU_V7_HAS_NONSEC
842 select CPU_V7_HAS_VIRT
845 select ARCH_SUPPORT_PSCI
847 Support for Freescale LS1021AIOT platform.
848 The LS1021A Freescale board (IOT) is a high-performance
849 development platform that supports the QorIQ LS1021A
850 Layerscape Architecture processor.
852 config TARGET_LS1043AQDS
853 bool "Support ls1043aqds"
856 select ARMV8_MULTIENTRY
857 select BOARD_LATE_INIT
859 select BOARD_EARLY_INIT_F
861 Support for Freescale LS1043AQDS platform.
863 config TARGET_LS1043ARDB
864 bool "Support ls1043ardb"
867 select ARMV8_MULTIENTRY
868 select BOARD_LATE_INIT
870 select BOARD_EARLY_INIT_F
872 Support for Freescale LS1043ARDB platform.
874 config TARGET_LS1046AQDS
875 bool "Support ls1046aqds"
878 select ARMV8_MULTIENTRY
879 select BOARD_LATE_INIT
881 select DM_SPI_FLASH if DM_SPI
882 select BOARD_EARLY_INIT_F
884 Support for Freescale LS1046AQDS platform.
885 The LS1046A Development System (QDS) is a high-performance
886 development platform that supports the QorIQ LS1046A
887 Layerscape Architecture processor.
889 config TARGET_LS1046ARDB
890 bool "Support ls1046ardb"
893 select ARMV8_MULTIENTRY
894 select BOARD_LATE_INIT
896 select DM_SPI_FLASH if DM_SPI
897 select POWER_MC34VR500
898 select BOARD_EARLY_INIT_F
900 Support for Freescale LS1046ARDB platform.
901 The LS1046A Reference Design Board (RDB) is a high-performance
902 development platform that supports the QorIQ LS1046A
903 Layerscape Architecture processor.
909 config TARGET_ZIPITZ2
910 bool "Support zipitz2"
913 config TARGET_COLIBRI_PXA270
914 bool "Support colibri_pxa270"
918 bool "Socionext UniPhier SoCs"
919 select BOARD_LATE_INIT
932 select SPL_LIBCOMMON_SUPPORT if SPL
933 select SPL_LIBGENERIC_SUPPORT if SPL
934 select SPL_OF_CONTROL if SPL
935 select SPL_PINCTRL if SPL
938 Support for UniPhier SoC family developed by Socionext Inc.
939 (formerly, System LSI Business Division of Panasonic Corporation)
946 select SYS_THUMB_BUILD
949 bool "Support STMicrolectronics SoCs"
957 Support for STMicroelectronics STiH407/10 SoC family.
958 This SoC is used on Linaro 96Board STiH410-B2260
961 bool "Support Rockchip SoCs"
967 select SYS_THUMB_BUILD if !ARM64
968 select SPL_SYS_MALLOC_SIMPLE if SPL
980 config TARGET_THUNDERX_88XX
981 bool "Support ThunderX 88xx"
984 select SYS_CACHE_SHIFT_7
987 bool "Support Aspeed SoCs"
993 source "arch/arm/mach-aspeed/Kconfig"
995 source "arch/arm/mach-at91/Kconfig"
997 source "arch/arm/mach-bcm283x/Kconfig"
999 source "arch/arm/mach-davinci/Kconfig"
1001 source "arch/arm/mach-exynos/Kconfig"
1003 source "arch/arm/mach-highbank/Kconfig"
1005 source "arch/arm/mach-integrator/Kconfig"
1007 source "arch/arm/mach-keystone/Kconfig"
1009 source "arch/arm/mach-kirkwood/Kconfig"
1011 source "arch/arm/mach-mvebu/Kconfig"
1013 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1015 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1017 source "arch/arm/cpu/armv7/mx7/Kconfig"
1019 source "arch/arm/cpu/armv7/mx6/Kconfig"
1021 source "arch/arm/cpu/armv7/mx5/Kconfig"
1023 source "arch/arm/mach-omap2/Kconfig"
1025 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1027 source "arch/arm/mach-orion5x/Kconfig"
1029 source "arch/arm/mach-rmobile/Kconfig"
1031 source "arch/arm/mach-meson/Kconfig"
1033 source "arch/arm/mach-rockchip/Kconfig"
1035 source "arch/arm/mach-s5pc1xx/Kconfig"
1037 source "arch/arm/mach-snapdragon/Kconfig"
1039 source "arch/arm/mach-socfpga/Kconfig"
1041 source "arch/arm/mach-sti/Kconfig"
1043 source "arch/arm/mach-stm32/Kconfig"
1045 source "arch/arm/mach-tegra/Kconfig"
1047 source "arch/arm/mach-uniphier/Kconfig"
1049 source "arch/arm/cpu/armv7/vf610/Kconfig"
1051 source "arch/arm/mach-zynq/Kconfig"
1053 source "arch/arm/cpu/armv7/Kconfig"
1055 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1057 source "arch/arm/cpu/armv8/Kconfig"
1059 source "arch/arm/imx-common/Kconfig"
1061 source "board/aries/m28evk/Kconfig"
1062 source "board/bosch/shc/Kconfig"
1063 source "board/CarMediaLab/flea3/Kconfig"
1064 source "board/Marvell/aspenite/Kconfig"
1065 source "board/Marvell/gplugd/Kconfig"
1066 source "board/armadeus/apf27/Kconfig"
1067 source "board/armltd/vexpress/Kconfig"
1068 source "board/armltd/vexpress64/Kconfig"
1069 source "board/bluegiga/apx4devkit/Kconfig"
1070 source "board/broadcom/bcm23550_w1d/Kconfig"
1071 source "board/broadcom/bcm28155_ap/Kconfig"
1072 source "board/broadcom/bcmcygnus/Kconfig"
1073 source "board/broadcom/bcmnsp/Kconfig"
1074 source "board/broadcom/bcmns2/Kconfig"
1075 source "board/cavium/thunderx/Kconfig"
1076 source "board/cirrus/edb93xx/Kconfig"
1077 source "board/creative/xfi3/Kconfig"
1078 source "board/freescale/ls2080a/Kconfig"
1079 source "board/freescale/ls2080aqds/Kconfig"
1080 source "board/freescale/ls2080ardb/Kconfig"
1081 source "board/freescale/ls1021aqds/Kconfig"
1082 source "board/freescale/ls1043aqds/Kconfig"
1083 source "board/freescale/ls1021atwr/Kconfig"
1084 source "board/freescale/ls1021aiot/Kconfig"
1085 source "board/freescale/ls1046aqds/Kconfig"
1086 source "board/freescale/ls1043ardb/Kconfig"
1087 source "board/freescale/ls1046ardb/Kconfig"
1088 source "board/freescale/ls1012aqds/Kconfig"
1089 source "board/freescale/ls1012ardb/Kconfig"
1090 source "board/freescale/ls1012afrdm/Kconfig"
1091 source "board/freescale/mx23evk/Kconfig"
1092 source "board/freescale/mx25pdk/Kconfig"
1093 source "board/freescale/mx28evk/Kconfig"
1094 source "board/freescale/mx31ads/Kconfig"
1095 source "board/freescale/mx31pdk/Kconfig"
1096 source "board/freescale/mx35pdk/Kconfig"
1097 source "board/freescale/s32v234evb/Kconfig"
1098 source "board/gdsys/a38x/Kconfig"
1099 source "board/grinn/chiliboard/Kconfig"
1100 source "board/gumstix/pepper/Kconfig"
1101 source "board/h2200/Kconfig"
1102 source "board/hisilicon/hikey/Kconfig"
1103 source "board/imx31_phycore/Kconfig"
1104 source "board/isee/igep0033/Kconfig"
1105 source "board/olimex/mx23_olinuxino/Kconfig"
1106 source "board/phytec/pcm051/Kconfig"
1107 source "board/ppcag/bg0900/Kconfig"
1108 source "board/sandisk/sansa_fuze_plus/Kconfig"
1109 source "board/schulercontrol/sc_sps_1/Kconfig"
1110 source "board/silica/pengwyn/Kconfig"
1111 source "board/spear/spear300/Kconfig"
1112 source "board/spear/spear310/Kconfig"
1113 source "board/spear/spear320/Kconfig"
1114 source "board/spear/spear600/Kconfig"
1115 source "board/spear/x600/Kconfig"
1116 source "board/st/stv0991/Kconfig"
1117 source "board/sunxi/Kconfig"
1118 source "board/syteco/zmx25/Kconfig"
1119 source "board/tcl/sl50/Kconfig"
1120 source "board/birdland/bav335x/Kconfig"
1121 source "board/timll/devkit3250/Kconfig"
1122 source "board/toradex/colibri_pxa270/Kconfig"
1123 source "board/technologic/ts4600/Kconfig"
1124 source "board/vscom/baltos/Kconfig"
1125 source "board/woodburn/Kconfig"
1126 source "board/work-microwave/work_92105/Kconfig"
1127 source "board/zipitz2/Kconfig"
1129 source "arch/arm/Kconfig.debug"