1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a file included as
291 <asm/arch/boot0.h> which contains the required assembler code.
293 config ARM_CORTEX_CPU_IS_UP
297 config USE_ARCH_MEMCPY
298 bool "Use an assembly optimized implementation of memcpy"
302 Enable the generation of an optimized version of memcpy.
303 Such implementation may be faster under some conditions
304 but may increase the binary size.
306 config SPL_USE_ARCH_MEMCPY
307 bool "Use an assembly optimized implementation of memcpy for SPL"
308 default y if USE_ARCH_MEMCPY
311 Enable the generation of an optimized version of memcpy.
312 Such implementation may be faster under some conditions
313 but may increase the binary size.
315 config USE_ARCH_MEMSET
316 bool "Use an assembly optimized implementation of memset"
320 Enable the generation of an optimized version of memset.
321 Such implementation may be faster under some conditions
322 but may increase the binary size.
324 config SPL_USE_ARCH_MEMSET
325 bool "Use an assembly optimized implementation of memset for SPL"
326 default y if USE_ARCH_MEMSET
329 Enable the generation of an optimized version of memset.
330 Such implementation may be faster under some conditions
331 but may increase the binary size.
333 config ARM64_SUPPORT_AARCH32
334 bool "ARM64 system support AArch32 execution state"
335 default y if ARM64 && !TARGET_THUNDERX_88XX
337 This ARM64 system supports AArch32 execution state.
340 prompt "Target select"
345 select SPL_BOARD_INIT if SPL
347 config TARGET_EDB93XX
348 bool "Support edb93xx"
352 config TARGET_ASPENITE
353 bool "Support aspenite"
357 bool "Support gplugd"
365 Support for TI's DaVinci platform.
368 bool "Marvell Kirkwood"
370 select BOARD_EARLY_INIT_F
371 select ARCH_MISC_INIT
374 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
384 config TARGET_DEVKIT3250
385 bool "Support devkit3250"
389 config TARGET_WORK_92105
390 bool "Support work_92105"
403 config TARGET_SPEAR300
404 bool "Support spear300"
406 select BOARD_EARLY_INIT_F
410 config TARGET_SPEAR310
411 bool "Support spear310"
413 select BOARD_EARLY_INIT_F
417 config TARGET_SPEAR320
418 bool "Support spear320"
420 select BOARD_EARLY_INIT_F
424 config TARGET_SPEAR600
425 bool "Support spear600"
427 select BOARD_EARLY_INIT_F
431 config TARGET_STV0991
432 bool "Support stv0991"
444 select BOARD_LATE_INIT
449 config TARGET_MX31PDK
450 bool "Support mx31pdk"
451 select BOARD_LATE_INIT
454 select BOARD_EARLY_INIT_F
456 config TARGET_WOODBURN
457 bool "Support woodburn"
460 config TARGET_WOODBURN_SD
461 bool "Support woodburn_sd"
469 config TARGET_MX35PDK
470 bool "Support mx35pdk"
471 select BOARD_LATE_INIT
475 bool "Broadcom BCM283X family"
481 select SERIAL_SEARCH_ALL
484 config TARGET_VEXPRESS_CA15_TC2
485 bool "Support vexpress_ca15_tc2"
487 select CPU_V7_HAS_NONSEC
488 select CPU_V7_HAS_VIRT
491 config TARGET_VEXPRESS_CA5X2
492 bool "Support vexpress_ca5x2"
496 config TARGET_VEXPRESS_CA9X4
497 bool "Support vexpress_ca9x4"
501 config TARGET_BCM23550_W1D
502 bool "Support bcm23550_w1d"
507 config TARGET_BCM28155_AP
508 bool "Support bcm28155_ap"
513 config TARGET_BCMCYGNUS
514 bool "Support bcmcygnus"
522 imply BCM_SF2_ETH_GMAC
525 bool "Support bcmnsp"
529 bool "Support Broadcom Northstar2"
532 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
533 ARMv8 Cortex-A57 processors targeting a broad range of networking
537 bool "Samsung EXYNOS"
549 bool "Samsung S5PC1XX"
557 bool "Calxeda Highbank"
561 config ARCH_INTEGRATOR
562 bool "ARM Ltd. Integrator family"
571 select SYS_THUMB_BUILD
577 config ARCH_OMAP2PLUS
580 select SPL_BOARD_INIT if SPL
581 select SPL_STACK_R if SPL
588 Support for the Meson SoC family developed by Amlogic Inc.,
589 targeted at media players and tablet computers. We currently
590 support the S905 (GXBaby) 64-bit SoC.
593 bool "NXP i.MX8M platform"
599 bool "NXP i.MX23 family"
610 bool "NXP i.MX28 family"
618 select ROM_UNIFIED_SECTIONS
624 select SYS_FSL_HAS_SEC if SECURE_BOOT
625 select SYS_FSL_SEC_COMPAT_4
626 select SYS_FSL_SEC_LE
627 select BOARD_EARLY_INIT_F
628 select ARCH_MISC_INIT
634 select SYS_FSL_HAS_SEC if SECURE_BOOT
635 select SYS_FSL_SEC_COMPAT_4
636 select SYS_FSL_SEC_LE
637 select SYS_THUMB_BUILD if SPL
642 default "arch/arm/mach-omap2/u-boot-spl.lds"
648 select BOARD_EARLY_INIT_F
652 bool "QEMU Virtual Platform"
659 bool "Renesas ARM SoCs"
662 select BOARD_EARLY_INIT_F
664 imply SYS_THUMB_BUILD
666 config TARGET_S32V234EVB
667 bool "Support s32v234evb"
669 select SYS_FSL_ERRATUM_ESDHC111
671 config ARCH_SNAPDRAGON
672 bool "Qualcomm Snapdragon SoCs"
682 bool "Altera SOCFPGA family"
686 select SPL_OF_CONTROL
688 select ENABLE_ARM_SOC_BOOT0_HOOK
689 select ARCH_EARLY_INIT_R
690 select ARCH_MISC_INIT
691 select SYS_THUMB_BUILD
698 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
701 bool "Support sunxi (Allwinner) SoCs"
704 select CMD_MMC if MMC
705 select CMD_USB if DISTRO_DEFAULTS
711 select DM_USB if DISTRO_DEFAULTS
712 select OF_BOARD_SETUP
715 select SPECIFY_CONSOLE_INDEX
716 select SPL_STACK_R if SPL
717 select SPL_SYS_MALLOC_SIMPLE if SPL
719 select SPL_SYS_THUMB_BUILD if !ARM64
720 select SYS_THUMB_BUILD if !ARM64
721 select USB if DISTRO_DEFAULTS
722 select USB_STORAGE if DISTRO_DEFAULTS
723 select USB_KEYBOARD if DISTRO_DEFAULTS
724 select USE_TINY_PRINTF
727 imply OF_LIBFDT_OVERLAY
728 imply PRE_CONSOLE_BUFFER
729 imply SPL_GPIO_SUPPORT
730 imply SPL_LIBCOMMON_SUPPORT
731 imply SPL_LIBDISK_SUPPORT
732 imply SPL_LIBGENERIC_SUPPORT
733 imply SPL_MMC_SUPPORT if MMC
734 imply SPL_POWER_SUPPORT
735 imply SPL_SERIAL_SUPPORT
739 bool "Freescale Vybrid"
741 select SYS_FSL_ERRATUM_ESDHC111
746 bool "Xilinx Zynq based platform"
747 select BOARD_LATE_INIT
751 select SPL_BOARD_INIT if SPL
752 select BOARD_EARLY_INIT_F if WDT
753 select SPL_OF_CONTROL if SPL
761 select SPL_SEPARATE_BSS if SPL
764 select SPL_CLK if SPL
772 bool "Xilinx ZynqMP based platform"
774 select BOARD_LATE_INIT
780 select SPL_BOARD_INIT if SPL
781 select SPL_CLK if SPL
789 config TARGET_VEXPRESS64_AEMV8A
790 bool "Support vexpress_aemv8a"
794 config TARGET_VEXPRESS64_BASE_FVP
795 bool "Support Versatile Express ARMv8a FVP BASE model"
800 config TARGET_VEXPRESS64_BASE_FVP_DRAM
801 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
805 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
806 the default config to allow the user to load the images directly into
807 DRAM using model parameters rather than by using semi-hosting to load
808 the files from the host filesystem.
810 config TARGET_VEXPRESS64_JUNO
811 bool "Support Versatile Express Juno Development Platform"
815 config TARGET_LS2080A_EMU
816 bool "Support ls2080a_emu"
819 select ARMV8_MULTIENTRY
820 select ARCH_MISC_INIT
822 Support for Freescale LS2080A_EMU platform
823 The LS2080A Development System (EMULATOR) is a pre silicon
824 development platform that supports the QorIQ LS2080A
825 Layerscape Architecture processor.
827 config TARGET_LS2080A_SIMU
828 bool "Support ls2080a_simu"
831 select ARMV8_MULTIENTRY
832 select ARCH_MISC_INIT
834 Support for Freescale LS2080A_SIMU platform
835 The LS2080A Development System (QDS) is a pre silicon
836 development platform that supports the QorIQ LS2080A
837 Layerscape Architecture processor.
839 config TARGET_LS1088AQDS
840 bool "Support ls1088aqds"
843 select ARMV8_MULTIENTRY
844 select ARCH_MISC_INIT
845 select BOARD_LATE_INIT
848 Support for NXP LS1088AQDS platform
849 The LS1088A Development System (QDS) is a high-performance
850 development platform that supports the QorIQ LS1088A
851 Layerscape Architecture processor.
853 config TARGET_LS2080AQDS
854 bool "Support ls2080aqds"
857 select ARMV8_MULTIENTRY
858 select BOARD_LATE_INIT
860 select ARCH_MISC_INIT
864 Support for Freescale LS2080AQDS platform
865 The LS2080A Development System (QDS) is a high-performance
866 development platform that supports the QorIQ LS2080A
867 Layerscape Architecture processor.
869 config TARGET_LS2080ARDB
870 bool "Support ls2080ardb"
873 select ARMV8_MULTIENTRY
874 select BOARD_LATE_INIT
876 select ARCH_MISC_INIT
880 Support for Freescale LS2080ARDB platform.
881 The LS2080A Reference design board (RDB) is a high-performance
882 development platform that supports the QorIQ LS2080A
883 Layerscape Architecture processor.
885 config TARGET_LS2081ARDB
886 bool "Support ls2081ardb"
889 select ARMV8_MULTIENTRY
890 select BOARD_LATE_INIT
892 select ARCH_MISC_INIT
894 Support for Freescale LS2081ARDB platform.
895 The LS2081A Reference design board (RDB) is a high-performance
896 development platform that supports the QorIQ LS2081A/LS2041A
897 Layerscape Architecture processor.
900 bool "Support HiKey 96boards Consumer Edition Platform"
907 select SPECIFY_CONSOLE_INDEX
909 Support for HiKey 96boards platform. It features a HI6220
910 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
913 bool "Support Poplar 96boards Enterprise Edition Platform"
921 Support for Poplar 96boards EE platform. It features a HI3798cv200
922 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
923 making it capable of running any commercial set-top solution based on
926 config TARGET_LS1012AQDS
927 bool "Support ls1012aqds"
930 select BOARD_LATE_INIT
932 Support for Freescale LS1012AQDS platform.
933 The LS1012A Development System (QDS) is a high-performance
934 development platform that supports the QorIQ LS1012A
935 Layerscape Architecture processor.
937 config TARGET_LS1012ARDB
938 bool "Support ls1012ardb"
941 select BOARD_LATE_INIT
945 Support for Freescale LS1012ARDB platform.
946 The LS1012A Reference design board (RDB) is a high-performance
947 development platform that supports the QorIQ LS1012A
948 Layerscape Architecture processor.
950 config TARGET_LS1012A2G5RDB
951 bool "Support ls1012a2g5rdb"
954 select BOARD_LATE_INIT
957 Support for Freescale LS1012A2G5RDB platform.
958 The LS1012A 2G5 Reference design board (RDB) is a high-performance
959 development platform that supports the QorIQ LS1012A
960 Layerscape Architecture processor.
962 config TARGET_LS1012AFRDM
963 bool "Support ls1012afrdm"
967 Support for Freescale LS1012AFRDM platform.
968 The LS1012A Freedom board (FRDM) is a high-performance
969 development platform that supports the QorIQ LS1012A
970 Layerscape Architecture processor.
972 config TARGET_LS1088ARDB
973 bool "Support ls1088ardb"
976 select ARMV8_MULTIENTRY
977 select ARCH_MISC_INIT
978 select BOARD_LATE_INIT
981 Support for NXP LS1088ARDB platform.
982 The LS1088A Reference design board (RDB) is a high-performance
983 development platform that supports the QorIQ LS1088A
984 Layerscape Architecture processor.
986 config TARGET_LS1021AQDS
987 bool "Support ls1021aqds"
988 select BOARD_LATE_INIT
990 select CPU_V7_HAS_NONSEC
991 select CPU_V7_HAS_VIRT
994 select ARCH_SUPPORT_PSCI
995 select LS1_DEEP_SLEEP
997 select BOARD_EARLY_INIT_F
1000 config TARGET_LS1021ATWR
1001 bool "Support ls1021atwr"
1002 select BOARD_LATE_INIT
1004 select CPU_V7_HAS_NONSEC
1005 select CPU_V7_HAS_VIRT
1008 select ARCH_SUPPORT_PSCI
1009 select LS1_DEEP_SLEEP
1010 select BOARD_EARLY_INIT_F
1013 config TARGET_LS1021AIOT
1014 bool "Support ls1021aiot"
1015 select BOARD_LATE_INIT
1017 select CPU_V7_HAS_NONSEC
1018 select CPU_V7_HAS_VIRT
1021 select ARCH_SUPPORT_PSCI
1024 Support for Freescale LS1021AIOT platform.
1025 The LS1021A Freescale board (IOT) is a high-performance
1026 development platform that supports the QorIQ LS1021A
1027 Layerscape Architecture processor.
1029 config TARGET_LS1043AQDS
1030 bool "Support ls1043aqds"
1033 select ARMV8_MULTIENTRY
1034 select BOARD_LATE_INIT
1036 select BOARD_EARLY_INIT_F
1039 Support for Freescale LS1043AQDS platform.
1041 config TARGET_LS1043ARDB
1042 bool "Support ls1043ardb"
1045 select ARMV8_MULTIENTRY
1046 select BOARD_LATE_INIT
1048 select BOARD_EARLY_INIT_F
1051 Support for Freescale LS1043ARDB platform.
1053 config TARGET_LS1046AQDS
1054 bool "Support ls1046aqds"
1057 select ARMV8_MULTIENTRY
1058 select BOARD_LATE_INIT
1060 select DM_SPI_FLASH if DM_SPI
1061 select BOARD_EARLY_INIT_F
1064 Support for Freescale LS1046AQDS platform.
1065 The LS1046A Development System (QDS) is a high-performance
1066 development platform that supports the QorIQ LS1046A
1067 Layerscape Architecture processor.
1069 config TARGET_LS1046ARDB
1070 bool "Support ls1046ardb"
1073 select ARMV8_MULTIENTRY
1074 select BOARD_LATE_INIT
1076 select DM_SPI_FLASH if DM_SPI
1077 select POWER_MC34VR500
1078 select BOARD_EARLY_INIT_F
1081 Support for Freescale LS1046ARDB platform.
1082 The LS1046A Reference Design Board (RDB) is a high-performance
1083 development platform that supports the QorIQ LS1046A
1084 Layerscape Architecture processor.
1087 bool "Support h2200"
1090 config TARGET_ZIPITZ2
1091 bool "Support zipitz2"
1094 config TARGET_COLIBRI_PXA270
1095 bool "Support colibri_pxa270"
1098 config ARCH_UNIPHIER
1099 bool "Socionext UniPhier SoCs"
1100 select BOARD_LATE_INIT
1111 select SPL_BOARD_INIT if SPL
1112 select SPL_DM if SPL
1113 select SPL_LIBCOMMON_SUPPORT if SPL
1114 select SPL_LIBGENERIC_SUPPORT if SPL
1115 select SPL_OF_CONTROL if SPL
1116 select SPL_PINCTRL if SPL
1120 Support for UniPhier SoC family developed by Socionext Inc.
1121 (formerly, System LSI Business Division of Panasonic Corporation)
1124 bool "Support STMicroelectronics STM32 MCU with cortex M"
1128 select SYS_THUMB_BUILD
1131 bool "Support STMicrolectronics SoCs"
1139 Support for STMicroelectronics STiH407/10 SoC family.
1140 This SoC is used on Linaro 96Board STiH410-B2260
1143 bool "Support STMicroelectronics STM32MP Socs with cortex A"
1144 select ARCH_MISC_INIT
1145 select BOARD_LATE_INIT
1158 select SYS_THUMB_BUILD
1160 Support for STM32MP SoC family developed by STMicroelectronics,
1161 MPUs based on ARM cortex A core
1162 U-BOOT is running in DDR and SPL support is the unsecure First Stage
1165 config ARCH_ROCKCHIP
1166 bool "Support Rockchip SoCs"
1170 select SPL_DM if SPL
1172 select SYS_THUMB_BUILD if !ARM64
1173 select SPL_SYS_MALLOC_SIMPLE if SPL
1180 select DM_USB if USB
1183 select ENABLE_ARM_SOC_BOOT0_HOOK
1188 imply USB_FUNCTION_FASTBOOT
1192 imply SARADC_ROCKCHIP
1195 config TARGET_THUNDERX_88XX
1196 bool "Support ThunderX 88xx"
1199 select SYS_CACHE_SHIFT_7
1203 bool "Support Aspeed SoCs"
1209 config TI_SECURE_DEVICE
1210 bool "HS Device Type Support"
1211 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS
1213 If a high secure (HS) device type is being used, this config
1214 must be set. This option impacts various aspects of the
1215 build system (to create signed boot images that can be
1216 authenticated) and the code. See the doc/README.ti-secure
1217 file for further details.
1219 source "arch/arm/mach-aspeed/Kconfig"
1221 source "arch/arm/mach-at91/Kconfig"
1223 source "arch/arm/mach-bcm283x/Kconfig"
1225 source "arch/arm/mach-davinci/Kconfig"
1227 source "arch/arm/mach-exynos/Kconfig"
1229 source "arch/arm/mach-highbank/Kconfig"
1231 source "arch/arm/mach-integrator/Kconfig"
1233 source "arch/arm/mach-keystone/Kconfig"
1235 source "arch/arm/mach-kirkwood/Kconfig"
1237 source "arch/arm/mach-mvebu/Kconfig"
1239 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1241 source "arch/arm/mach-imx/mx2/Kconfig"
1243 source "arch/arm/mach-imx/mx5/Kconfig"
1245 source "arch/arm/mach-imx/mx6/Kconfig"
1247 source "arch/arm/mach-imx/mx7/Kconfig"
1249 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1251 source "arch/arm/mach-imx/mx8m/Kconfig"
1253 source "arch/arm/mach-imx/mxs/Kconfig"
1255 source "arch/arm/mach-omap2/Kconfig"
1257 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1259 source "arch/arm/mach-orion5x/Kconfig"
1261 source "arch/arm/mach-rmobile/Kconfig"
1263 source "arch/arm/mach-meson/Kconfig"
1265 source "arch/arm/mach-qemu/Kconfig"
1267 source "arch/arm/mach-rockchip/Kconfig"
1269 source "arch/arm/mach-s5pc1xx/Kconfig"
1271 source "arch/arm/mach-snapdragon/Kconfig"
1273 source "arch/arm/mach-socfpga/Kconfig"
1275 source "arch/arm/mach-sti/Kconfig"
1277 source "arch/arm/mach-stm32/Kconfig"
1279 source "arch/arm/mach-stm32mp/Kconfig"
1281 source "arch/arm/mach-sunxi/Kconfig"
1283 source "arch/arm/mach-tegra/Kconfig"
1285 source "arch/arm/mach-uniphier/Kconfig"
1287 source "arch/arm/cpu/armv7/vf610/Kconfig"
1289 source "arch/arm/mach-zynq/Kconfig"
1291 source "arch/arm/cpu/armv7/Kconfig"
1293 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1295 source "arch/arm/cpu/armv8/Kconfig"
1297 source "arch/arm/mach-imx/Kconfig"
1299 source "board/bosch/shc/Kconfig"
1300 source "board/CarMediaLab/flea3/Kconfig"
1301 source "board/Marvell/aspenite/Kconfig"
1302 source "board/Marvell/gplugd/Kconfig"
1303 source "board/armadeus/apf27/Kconfig"
1304 source "board/armltd/vexpress/Kconfig"
1305 source "board/armltd/vexpress64/Kconfig"
1306 source "board/broadcom/bcm23550_w1d/Kconfig"
1307 source "board/broadcom/bcm28155_ap/Kconfig"
1308 source "board/broadcom/bcmcygnus/Kconfig"
1309 source "board/broadcom/bcmnsp/Kconfig"
1310 source "board/broadcom/bcmns2/Kconfig"
1311 source "board/cavium/thunderx/Kconfig"
1312 source "board/cirrus/edb93xx/Kconfig"
1313 source "board/eets/pdu001/Kconfig"
1314 source "board/freescale/ls2080a/Kconfig"
1315 source "board/freescale/ls2080aqds/Kconfig"
1316 source "board/freescale/ls2080ardb/Kconfig"
1317 source "board/freescale/ls1088a/Kconfig"
1318 source "board/freescale/ls1021aqds/Kconfig"
1319 source "board/freescale/ls1043aqds/Kconfig"
1320 source "board/freescale/ls1021atwr/Kconfig"
1321 source "board/freescale/ls1021aiot/Kconfig"
1322 source "board/freescale/ls1046aqds/Kconfig"
1323 source "board/freescale/ls1043ardb/Kconfig"
1324 source "board/freescale/ls1046ardb/Kconfig"
1325 source "board/freescale/ls1012aqds/Kconfig"
1326 source "board/freescale/ls1012ardb/Kconfig"
1327 source "board/freescale/ls1012afrdm/Kconfig"
1328 source "board/freescale/mx31pdk/Kconfig"
1329 source "board/freescale/mx35pdk/Kconfig"
1330 source "board/freescale/s32v234evb/Kconfig"
1331 source "board/gdsys/a38x/Kconfig"
1332 source "board/grinn/chiliboard/Kconfig"
1333 source "board/gumstix/pepper/Kconfig"
1334 source "board/h2200/Kconfig"
1335 source "board/hisilicon/hikey/Kconfig"
1336 source "board/hisilicon/poplar/Kconfig"
1337 source "board/isee/igep003x/Kconfig"
1338 source "board/phytec/pcm051/Kconfig"
1339 source "board/silica/pengwyn/Kconfig"
1340 source "board/spear/spear300/Kconfig"
1341 source "board/spear/spear310/Kconfig"
1342 source "board/spear/spear320/Kconfig"
1343 source "board/spear/spear600/Kconfig"
1344 source "board/spear/x600/Kconfig"
1345 source "board/st/stv0991/Kconfig"
1346 source "board/tcl/sl50/Kconfig"
1347 source "board/birdland/bav335x/Kconfig"
1348 source "board/timll/devkit3250/Kconfig"
1349 source "board/toradex/colibri_pxa270/Kconfig"
1350 source "board/vscom/baltos/Kconfig"
1351 source "board/woodburn/Kconfig"
1352 source "board/work-microwave/work_92105/Kconfig"
1353 source "board/xilinx/zynqmp/Kconfig"
1354 source "board/zipitz2/Kconfig"
1356 source "arch/arm/Kconfig.debug"
1361 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX23 || ARCH_MX28
1362 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1363 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64