1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a define called
291 ARM_SOC_BOOT0_HOOK which contains the required assembler
294 config ARM_CORTEX_CPU_IS_UP
298 config USE_ARCH_MEMCPY
299 bool "Use an assembly optimized implementation of memcpy"
303 Enable the generation of an optimized version of memcpy.
304 Such implementation may be faster under some conditions
305 but may increase the binary size.
307 config SPL_USE_ARCH_MEMCPY
308 bool "Use an assembly optimized implementation of memcpy for SPL"
309 default y if USE_ARCH_MEMCPY
312 Enable the generation of an optimized version of memcpy.
313 Such implementation may be faster under some conditions
314 but may increase the binary size.
316 config USE_ARCH_MEMSET
317 bool "Use an assembly optimized implementation of memset"
321 Enable the generation of an optimized version of memset.
322 Such implementation may be faster under some conditions
323 but may increase the binary size.
325 config SPL_USE_ARCH_MEMSET
326 bool "Use an assembly optimized implementation of memset for SPL"
327 default y if USE_ARCH_MEMSET
330 Enable the generation of an optimized version of memset.
331 Such implementation may be faster under some conditions
332 but may increase the binary size.
334 config ARM64_SUPPORT_AARCH32
335 bool "ARM64 system support AArch32 execution state"
336 default y if ARM64 && !TARGET_THUNDERX_88XX
338 This ARM64 system supports AArch32 execution state.
341 prompt "Target select"
346 select SPL_BOARD_INIT if SPL
348 config TARGET_EDB93XX
349 bool "Support edb93xx"
352 config TARGET_ASPENITE
353 bool "Support aspenite"
357 bool "Support gplugd"
365 Support for TI's DaVinci platform.
368 bool "Marvell Kirkwood"
370 select BOARD_EARLY_INIT_F
371 select ARCH_MISC_INIT
374 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
383 config TARGET_DEVKIT3250
384 bool "Support devkit3250"
388 config TARGET_WORK_92105
389 bool "Support work_92105"
398 config TARGET_APX4DEVKIT
399 bool "Support apx4devkit"
409 bool "Support m28evk"
413 config TARGET_MX23EVK
414 bool "Support mx23evk"
417 select BOARD_EARLY_INIT_F
419 config TARGET_MX28EVK
420 bool "Support mx28evk"
423 select BOARD_EARLY_INIT_F
425 config TARGET_MX23_OLINUXINO
426 bool "Support mx23_olinuxino"
429 select BOARD_EARLY_INIT_F
432 bool "Support bg0900"
436 config TARGET_SANSA_FUZE_PLUS
437 bool "Support sansa_fuze_plus"
441 config TARGET_SC_SPS_1
442 bool "Support sc_sps_1"
450 config TARGET_SPEAR300
451 bool "Support spear300"
453 select BOARD_EARLY_INIT_F
456 config TARGET_SPEAR310
457 bool "Support spear310"
459 select BOARD_EARLY_INIT_F
462 config TARGET_SPEAR320
463 bool "Support spear320"
465 select BOARD_EARLY_INIT_F
468 config TARGET_SPEAR600
469 bool "Support spear600"
471 select BOARD_EARLY_INIT_F
474 config TARGET_STV0991
475 bool "Support stv0991"
485 select BOARD_LATE_INIT
489 config TARGET_IMX31_PHYCORE
490 bool "Support imx31_phycore_eet"
492 select BOARD_EARLY_INIT_F
494 config TARGET_IMX31_PHYCORE_EET
495 bool "Support imx31_phycore_eet"
496 select BOARD_LATE_INIT
498 select BOARD_EARLY_INIT_F
500 config TARGET_MX31ADS
501 bool "Support mx31ads"
503 select BOARD_EARLY_INIT_F
505 config TARGET_MX31PDK
506 bool "Support mx31pdk"
507 select BOARD_LATE_INIT
510 select BOARD_EARLY_INIT_F
512 config TARGET_WOODBURN
513 bool "Support woodburn"
516 config TARGET_WOODBURN_SD
517 bool "Support woodburn_sd"
525 config TARGET_MX35PDK
526 bool "Support mx35pdk"
527 select BOARD_LATE_INIT
531 bool "Broadcom BCM283X family"
538 config TARGET_VEXPRESS_CA15_TC2
539 bool "Support vexpress_ca15_tc2"
541 select CPU_V7_HAS_NONSEC
542 select CPU_V7_HAS_VIRT
544 config TARGET_VEXPRESS_CA5X2
545 bool "Support vexpress_ca5x2"
548 config TARGET_VEXPRESS_CA9X4
549 bool "Support vexpress_ca9x4"
552 config TARGET_BCM23550_W1D
553 bool "Support bcm23550_w1d"
558 config TARGET_BCM28155_AP
559 bool "Support bcm28155_ap"
564 config TARGET_BCMCYGNUS
565 bool "Support bcmcygnus"
573 imply BCM_SF2_ETH_GMAC
576 bool "Support bcmnsp"
580 bool "Support Broadcom Northstar2"
583 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
584 ARMv8 Cortex-A57 processors targeting a broad range of networking
588 bool "Samsung EXYNOS"
599 bool "Samsung S5PC1XX"
607 bool "Calxeda Highbank"
610 config ARCH_INTEGRATOR
611 bool "ARM Ltd. Integrator family"
619 select SYS_THUMB_BUILD
625 config ARCH_OMAP2PLUS
628 select SPL_BOARD_INIT if SPL
629 select SPL_STACK_R if SPL
636 Support for the Meson SoC family developed by Amlogic Inc.,
637 targeted at media players and tablet computers. We currently
638 support the S905 (GXBaby) 64-bit SoC.
647 select ROM_UNIFIED_SECTIONS
652 select SYS_FSL_HAS_SEC if SECURE_BOOT
653 select SYS_FSL_SEC_COMPAT_4
654 select SYS_FSL_SEC_LE
655 select BOARD_EARLY_INIT_F
656 select ARCH_MISC_INIT
661 select SYS_FSL_HAS_SEC if SECURE_BOOT
662 select SYS_FSL_SEC_COMPAT_4
663 select SYS_FSL_SEC_LE
664 select SYS_THUMB_BUILD if SPL
668 default "arch/arm/mach-omap2/u-boot-spl.lds"
674 select BOARD_EARLY_INIT_F
677 bool "QEMU Virtual Platform"
683 bool "Renesas ARM SoCs"
686 select BOARD_EARLY_INIT_F
688 imply SYS_THUMB_BUILD
690 config TARGET_S32V234EVB
691 bool "Support s32v234evb"
693 select SYS_FSL_ERRATUM_ESDHC111
695 config ARCH_SNAPDRAGON
696 bool "Qualcomm Snapdragon SoCs"
706 bool "Altera SOCFPGA family"
710 select SPL_OF_CONTROL
714 select ENABLE_ARM_SOC_BOOT0_HOOK
715 select ARCH_EARLY_INIT_R
716 select ARCH_MISC_INIT
717 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
718 select SYS_THUMB_BUILD
724 bool "Support sunxi (Allwinner) SoCs"
727 select CMD_MMC if MMC
728 select CMD_USB if DISTRO_DEFAULTS
734 select DM_USB if DISTRO_DEFAULTS
735 select OF_BOARD_SETUP
738 select SPL_STACK_R if SPL
739 select SPL_SYS_MALLOC_SIMPLE if SPL
741 select SPL_SYS_THUMB_BUILD if !ARM64
742 select SYS_THUMB_BUILD if !ARM64
743 select USB if DISTRO_DEFAULTS
744 select USB_STORAGE if DISTRO_DEFAULTS
745 select USB_KEYBOARD if DISTRO_DEFAULTS
746 select USE_TINY_PRINTF
749 imply PRE_CONSOLE_BUFFER
750 imply SPL_GPIO_SUPPORT
751 imply SPL_LIBCOMMON_SUPPORT
752 imply SPL_LIBDISK_SUPPORT
753 imply SPL_LIBGENERIC_SUPPORT
754 imply SPL_MMC_SUPPORT if MMC
755 imply SPL_POWER_SUPPORT
756 imply SPL_SERIAL_SUPPORT
760 bool "Support TS4600"
765 bool "Freescale Vybrid"
767 select SYS_FSL_ERRATUM_ESDHC111
772 bool "Xilinx Zynq based platform"
773 select BOARD_LATE_INIT
777 select SPL_BOARD_INIT if SPL
778 select SPL_OF_CONTROL if SPL
787 select SPL_SEPARATE_BSS if SPL
798 bool "Xilinx ZynqMP based platform"
800 select BOARD_LATE_INIT
806 select SPL_BOARD_INIT if SPL
807 select SPL_CLK if SPL
815 config TARGET_VEXPRESS64_AEMV8A
816 bool "Support vexpress_aemv8a"
819 config TARGET_VEXPRESS64_BASE_FVP
820 bool "Support Versatile Express ARMv8a FVP BASE model"
824 config TARGET_VEXPRESS64_BASE_FVP_DRAM
825 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
828 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
829 the default config to allow the user to load the images directly into
830 DRAM using model parameters rather than by using semi-hosting to load
831 the files from the host filesystem.
833 config TARGET_VEXPRESS64_JUNO
834 bool "Support Versatile Express Juno Development Platform"
837 config TARGET_LS2080A_EMU
838 bool "Support ls2080a_emu"
841 select ARMV8_MULTIENTRY
842 select ARCH_MISC_INIT
844 Support for Freescale LS2080A_EMU platform
845 The LS2080A Development System (EMULATOR) is a pre silicon
846 development platform that supports the QorIQ LS2080A
847 Layerscape Architecture processor.
849 config TARGET_LS2080A_SIMU
850 bool "Support ls2080a_simu"
853 select ARMV8_MULTIENTRY
854 select ARCH_MISC_INIT
856 Support for Freescale LS2080A_SIMU platform
857 The LS2080A Development System (QDS) is a pre silicon
858 development platform that supports the QorIQ LS2080A
859 Layerscape Architecture processor.
861 config TARGET_LS1088AQDS
862 bool "Support ls1088aqds"
865 select ARMV8_MULTIENTRY
866 select ARCH_MISC_INIT
867 select BOARD_LATE_INIT
870 Support for NXP LS1088AQDS platform
871 The LS1088A Development System (QDS) is a high-performance
872 development platform that supports the QorIQ LS1088A
873 Layerscape Architecture processor.
875 config TARGET_LS2080AQDS
876 bool "Support ls2080aqds"
879 select ARMV8_MULTIENTRY
880 select BOARD_LATE_INIT
882 select ARCH_MISC_INIT
886 Support for Freescale LS2080AQDS platform
887 The LS2080A Development System (QDS) is a high-performance
888 development platform that supports the QorIQ LS2080A
889 Layerscape Architecture processor.
891 config TARGET_LS2080ARDB
892 bool "Support ls2080ardb"
895 select ARMV8_MULTIENTRY
896 select BOARD_LATE_INIT
898 select ARCH_MISC_INIT
902 Support for Freescale LS2080ARDB platform.
903 The LS2080A Reference design board (RDB) is a high-performance
904 development platform that supports the QorIQ LS2080A
905 Layerscape Architecture processor.
907 config TARGET_LS2081ARDB
908 bool "Support ls2081ardb"
911 select ARMV8_MULTIENTRY
912 select BOARD_LATE_INIT
914 select ARCH_MISC_INIT
916 Support for Freescale LS2081ARDB platform.
917 The LS2081A Reference design board (RDB) is a high-performance
918 development platform that supports the QorIQ LS2081A/LS2041A
919 Layerscape Architecture processor.
922 bool "Support HiKey 96boards Consumer Edition Platform"
929 Support for HiKey 96boards platform. It features a HI6220
930 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
933 bool "Support Poplar 96boards Enterprise Edition Platform"
940 Support for Poplar 96boards EE platform. It features a HI3798cv200
941 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
942 making it capable of running any commercial set-top solution based on
945 config TARGET_LS1012AQDS
946 bool "Support ls1012aqds"
949 select BOARD_LATE_INIT
951 Support for Freescale LS1012AQDS platform.
952 The LS1012A Development System (QDS) is a high-performance
953 development platform that supports the QorIQ LS1012A
954 Layerscape Architecture processor.
956 config TARGET_LS1012ARDB
957 bool "Support ls1012ardb"
960 select BOARD_LATE_INIT
964 Support for Freescale LS1012ARDB platform.
965 The LS1012A Reference design board (RDB) is a high-performance
966 development platform that supports the QorIQ LS1012A
967 Layerscape Architecture processor.
969 config TARGET_LS1012A2G5RDB
970 bool "Support ls1012a2g5rdb"
973 select BOARD_LATE_INIT
976 Support for Freescale LS1012A2G5RDB platform.
977 The LS1012A 2G5 Reference design board (RDB) is a high-performance
978 development platform that supports the QorIQ LS1012A
979 Layerscape Architecture processor.
981 config TARGET_LS1012AFRDM
982 bool "Support ls1012afrdm"
986 Support for Freescale LS1012AFRDM platform.
987 The LS1012A Freedom board (FRDM) is a high-performance
988 development platform that supports the QorIQ LS1012A
989 Layerscape Architecture processor.
991 config TARGET_LS1088ARDB
992 bool "Support ls1088ardb"
995 select ARMV8_MULTIENTRY
996 select ARCH_MISC_INIT
997 select BOARD_LATE_INIT
1000 Support for NXP LS1088ARDB platform.
1001 The LS1088A Reference design board (RDB) is a high-performance
1002 development platform that supports the QorIQ LS1088A
1003 Layerscape Architecture processor.
1005 config TARGET_LS1021AQDS
1006 bool "Support ls1021aqds"
1007 select BOARD_LATE_INIT
1009 select CPU_V7_HAS_NONSEC
1010 select CPU_V7_HAS_VIRT
1013 select ARCH_SUPPORT_PSCI
1014 select LS1_DEEP_SLEEP
1016 select BOARD_EARLY_INIT_F
1019 config TARGET_LS1021ATWR
1020 bool "Support ls1021atwr"
1021 select BOARD_LATE_INIT
1023 select CPU_V7_HAS_NONSEC
1024 select CPU_V7_HAS_VIRT
1027 select ARCH_SUPPORT_PSCI
1028 select LS1_DEEP_SLEEP
1029 select BOARD_EARLY_INIT_F
1032 config TARGET_LS1021AIOT
1033 bool "Support ls1021aiot"
1034 select BOARD_LATE_INIT
1036 select CPU_V7_HAS_NONSEC
1037 select CPU_V7_HAS_VIRT
1040 select ARCH_SUPPORT_PSCI
1043 Support for Freescale LS1021AIOT platform.
1044 The LS1021A Freescale board (IOT) is a high-performance
1045 development platform that supports the QorIQ LS1021A
1046 Layerscape Architecture processor.
1048 config TARGET_LS1043AQDS
1049 bool "Support ls1043aqds"
1052 select ARMV8_MULTIENTRY
1053 select BOARD_LATE_INIT
1055 select BOARD_EARLY_INIT_F
1058 Support for Freescale LS1043AQDS platform.
1060 config TARGET_LS1043ARDB
1061 bool "Support ls1043ardb"
1064 select ARMV8_MULTIENTRY
1065 select BOARD_LATE_INIT
1067 select BOARD_EARLY_INIT_F
1070 Support for Freescale LS1043ARDB platform.
1072 config TARGET_LS1046AQDS
1073 bool "Support ls1046aqds"
1076 select ARMV8_MULTIENTRY
1077 select BOARD_LATE_INIT
1079 select DM_SPI_FLASH if DM_SPI
1080 select BOARD_EARLY_INIT_F
1083 Support for Freescale LS1046AQDS platform.
1084 The LS1046A Development System (QDS) is a high-performance
1085 development platform that supports the QorIQ LS1046A
1086 Layerscape Architecture processor.
1088 config TARGET_LS1046ARDB
1089 bool "Support ls1046ardb"
1092 select ARMV8_MULTIENTRY
1093 select BOARD_LATE_INIT
1095 select DM_SPI_FLASH if DM_SPI
1096 select POWER_MC34VR500
1097 select BOARD_EARLY_INIT_F
1100 Support for Freescale LS1046ARDB platform.
1101 The LS1046A Reference Design Board (RDB) is a high-performance
1102 development platform that supports the QorIQ LS1046A
1103 Layerscape Architecture processor.
1106 bool "Support h2200"
1109 config TARGET_ZIPITZ2
1110 bool "Support zipitz2"
1113 config TARGET_COLIBRI_PXA270
1114 bool "Support colibri_pxa270"
1117 config ARCH_UNIPHIER
1118 bool "Socionext UniPhier SoCs"
1119 select BOARD_LATE_INIT
1130 select SPL_BOARD_INIT if SPL
1131 select SPL_DM if SPL
1132 select SPL_LIBCOMMON_SUPPORT if SPL
1133 select SPL_LIBGENERIC_SUPPORT if SPL
1134 select SPL_OF_CONTROL if SPL
1135 select SPL_PINCTRL if SPL
1139 Support for UniPhier SoC family developed by Socionext Inc.
1140 (formerly, System LSI Business Division of Panasonic Corporation)
1143 bool "Support STM32"
1147 select SYS_THUMB_BUILD
1150 bool "Support STMicrolectronics SoCs"
1158 Support for STMicroelectronics STiH407/10 SoC family.
1159 This SoC is used on Linaro 96Board STiH410-B2260
1161 config ARCH_ROCKCHIP
1162 bool "Support Rockchip SoCs"
1166 select SPL_DM if SPL
1168 select SYS_THUMB_BUILD if !ARM64
1169 select SPL_SYS_MALLOC_SIMPLE if SPL
1176 select DM_USB if USB
1179 select ENABLE_ARM_SOC_BOOT0_HOOK
1183 imply USB_FUNCTION_FASTBOOT
1187 imply SARADC_ROCKCHIP
1189 config TARGET_THUNDERX_88XX
1190 bool "Support ThunderX 88xx"
1193 select SYS_CACHE_SHIFT_7
1196 bool "Support Aspeed SoCs"
1202 source "arch/arm/mach-aspeed/Kconfig"
1204 source "arch/arm/mach-at91/Kconfig"
1206 source "arch/arm/mach-bcm283x/Kconfig"
1208 source "arch/arm/mach-davinci/Kconfig"
1210 source "arch/arm/mach-exynos/Kconfig"
1212 source "arch/arm/mach-highbank/Kconfig"
1214 source "arch/arm/mach-integrator/Kconfig"
1216 source "arch/arm/mach-keystone/Kconfig"
1218 source "arch/arm/mach-kirkwood/Kconfig"
1220 source "arch/arm/mach-mvebu/Kconfig"
1222 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1224 source "arch/arm/mach-imx/mx2/Kconfig"
1226 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1228 source "arch/arm/mach-imx/mx7/Kconfig"
1230 source "arch/arm/mach-imx/mx6/Kconfig"
1232 source "arch/arm/mach-imx/mx5/Kconfig"
1234 source "arch/arm/mach-omap2/Kconfig"
1236 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1238 source "arch/arm/mach-orion5x/Kconfig"
1240 source "arch/arm/mach-rmobile/Kconfig"
1242 source "arch/arm/mach-meson/Kconfig"
1244 source "arch/arm/mach-qemu/Kconfig"
1246 source "arch/arm/mach-rockchip/Kconfig"
1248 source "arch/arm/mach-s5pc1xx/Kconfig"
1250 source "arch/arm/mach-snapdragon/Kconfig"
1252 source "arch/arm/mach-socfpga/Kconfig"
1254 source "arch/arm/mach-sti/Kconfig"
1256 source "arch/arm/mach-stm32/Kconfig"
1258 source "arch/arm/mach-sunxi/Kconfig"
1260 source "arch/arm/mach-tegra/Kconfig"
1262 source "arch/arm/mach-uniphier/Kconfig"
1264 source "arch/arm/cpu/armv7/vf610/Kconfig"
1266 source "arch/arm/mach-zynq/Kconfig"
1268 source "arch/arm/cpu/armv7/Kconfig"
1270 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1272 source "arch/arm/cpu/armv8/Kconfig"
1274 source "arch/arm/mach-imx/Kconfig"
1276 source "board/aries/m28evk/Kconfig"
1277 source "board/bosch/shc/Kconfig"
1278 source "board/CarMediaLab/flea3/Kconfig"
1279 source "board/Marvell/aspenite/Kconfig"
1280 source "board/Marvell/gplugd/Kconfig"
1281 source "board/armadeus/apf27/Kconfig"
1282 source "board/armltd/vexpress/Kconfig"
1283 source "board/armltd/vexpress64/Kconfig"
1284 source "board/bluegiga/apx4devkit/Kconfig"
1285 source "board/broadcom/bcm23550_w1d/Kconfig"
1286 source "board/broadcom/bcm28155_ap/Kconfig"
1287 source "board/broadcom/bcmcygnus/Kconfig"
1288 source "board/broadcom/bcmnsp/Kconfig"
1289 source "board/broadcom/bcmns2/Kconfig"
1290 source "board/cavium/thunderx/Kconfig"
1291 source "board/cirrus/edb93xx/Kconfig"
1292 source "board/creative/xfi3/Kconfig"
1293 source "board/freescale/ls2080a/Kconfig"
1294 source "board/freescale/ls2080aqds/Kconfig"
1295 source "board/freescale/ls2080ardb/Kconfig"
1296 source "board/freescale/ls1088a/Kconfig"
1297 source "board/freescale/ls1021aqds/Kconfig"
1298 source "board/freescale/ls1043aqds/Kconfig"
1299 source "board/freescale/ls1021atwr/Kconfig"
1300 source "board/freescale/ls1021aiot/Kconfig"
1301 source "board/freescale/ls1046aqds/Kconfig"
1302 source "board/freescale/ls1043ardb/Kconfig"
1303 source "board/freescale/ls1046ardb/Kconfig"
1304 source "board/freescale/ls1012aqds/Kconfig"
1305 source "board/freescale/ls1012ardb/Kconfig"
1306 source "board/freescale/ls1012afrdm/Kconfig"
1307 source "board/freescale/mx23evk/Kconfig"
1308 source "board/freescale/mx28evk/Kconfig"
1309 source "board/freescale/mx31ads/Kconfig"
1310 source "board/freescale/mx31pdk/Kconfig"
1311 source "board/freescale/mx35pdk/Kconfig"
1312 source "board/freescale/s32v234evb/Kconfig"
1313 source "board/gdsys/a38x/Kconfig"
1314 source "board/grinn/chiliboard/Kconfig"
1315 source "board/gumstix/pepper/Kconfig"
1316 source "board/h2200/Kconfig"
1317 source "board/hisilicon/hikey/Kconfig"
1318 source "board/hisilicon/poplar/Kconfig"
1319 source "board/imx31_phycore/Kconfig"
1320 source "board/isee/igep003x/Kconfig"
1321 source "board/olimex/mx23_olinuxino/Kconfig"
1322 source "board/phytec/pcm051/Kconfig"
1323 source "board/ppcag/bg0900/Kconfig"
1324 source "board/sandisk/sansa_fuze_plus/Kconfig"
1325 source "board/schulercontrol/sc_sps_1/Kconfig"
1326 source "board/silica/pengwyn/Kconfig"
1327 source "board/spear/spear300/Kconfig"
1328 source "board/spear/spear310/Kconfig"
1329 source "board/spear/spear320/Kconfig"
1330 source "board/spear/spear600/Kconfig"
1331 source "board/spear/x600/Kconfig"
1332 source "board/st/stv0991/Kconfig"
1333 source "board/tcl/sl50/Kconfig"
1334 source "board/birdland/bav335x/Kconfig"
1335 source "board/timll/devkit3250/Kconfig"
1336 source "board/toradex/colibri_pxa270/Kconfig"
1337 source "board/technologic/ts4600/Kconfig"
1338 source "board/vscom/baltos/Kconfig"
1339 source "board/woodburn/Kconfig"
1340 source "board/work-microwave/work_92105/Kconfig"
1341 source "board/zipitz2/Kconfig"
1343 source "arch/arm/Kconfig.debug"
1348 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1349 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1350 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64