1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
12 config DMA_ADDR_T_64BIT
22 # If set, the workarounds for these ARM errata are applied early during U-Boot
23 # startup. Note that in general these options force the workarounds to be
24 # applied; no CPU-type/version detection exists, unlike the similar options in
25 # the Linux kernel. Do not set these options unless they apply! Also note that
26 # the following can be machine specific errata. These do have ability to
27 # provide rudimentary version and machine specific checks, but expect no
29 # CONFIG_ARM_ERRATA_430973
30 # CONFIG_ARM_ERRATA_454179
31 # CONFIG_ARM_ERRATA_621766
32 # CONFIG_ARM_ERRATA_798870
33 # CONFIG_ARM_ERRATA_801819
34 config ARM_ERRATA_430973
37 config ARM_ERRATA_454179
40 config ARM_ERRATA_621766
43 config ARM_ERRATA_716044
46 config ARM_ERRATA_725233
49 config ARM_ERRATA_742230
52 config ARM_ERRATA_743622
55 config ARM_ERRATA_751472
58 config ARM_ERRATA_761320
61 config ARM_ERRATA_773022
64 config ARM_ERRATA_774769
67 config ARM_ERRATA_794072
70 config ARM_ERRATA_798870
73 config ARM_ERRATA_801819
76 config ARM_ERRATA_826974
79 config ARM_ERRATA_828024
82 config ARM_ERRATA_829520
85 config ARM_ERRATA_833069
88 config ARM_ERRATA_833471
91 config ARM_ERRATA_852421
94 config ARM_ERRATA_852423
99 select SYS_CACHE_SHIFT_5
103 select SYS_CACHE_SHIFT_5
107 select SYS_CACHE_SHIFT_5
111 select SYS_CACHE_SHIFT_5
115 select SYS_CACHE_SHIFT_5
120 select SYS_CACHE_SHIFT_5
126 select SYS_CACHE_SHIFT_6
131 select SYS_CACHE_SHIFT_5
135 select SYS_CACHE_SHIFT_5
139 select SYS_CACHE_SHIFT_5
142 default "arm720t" if CPU_ARM720T
143 default "arm920t" if CPU_ARM920T
144 default "arm926ejs" if CPU_ARM926EJS
145 default "arm946es" if CPU_ARM946ES
146 default "arm1136" if CPU_ARM1136
147 default "arm1176" if CPU_ARM1176
148 default "armv7" if CPU_V7
149 default "armv7m" if CPU_V7M
150 default "pxa" if CPU_PXA
151 default "sa1100" if CPU_SA1100
152 default "armv8" if ARM64
156 default 4 if CPU_ARM720T
157 default 4 if CPU_ARM920T
158 default 5 if CPU_ARM926EJS
159 default 5 if CPU_ARM946ES
160 default 6 if CPU_ARM1136
161 default 6 if CPU_ARM1176
165 default 4 if CPU_SA1100
168 config SYS_CACHE_SHIFT_5
171 config SYS_CACHE_SHIFT_6
174 config SYS_CACHE_SHIFT_7
177 config SYS_CACHELINE_SIZE
179 default 128 if SYS_CACHE_SHIFT_7
180 default 64 if SYS_CACHE_SHIFT_6
181 default 32 if SYS_CACHE_SHIFT_5
184 bool "Support for ARM SMC Calling Convention (SMCCC)"
185 depends on CPU_V7 || ARM64
188 Say Y here if you want to enable ARM SMC Calling Convention.
189 This should be enabled if U-Boot needs to communicate with system
190 firmware (for example, PSCI) according to SMCCC.
193 bool "support boot from semihosting"
195 In emulated environments, semihosting is a way for
196 the hosted environment to call out to the emulator to
197 retrieve files from the host machine.
199 config SYS_THUMB_BUILD
200 bool "Build U-Boot using the Thumb instruction set"
203 Use this flag to build U-Boot using the Thumb instruction set for
204 ARM architectures. Thumb instruction set provides better code
205 density. For ARM architectures that support Thumb2 this flag will
206 result in Thumb2 code generated by GCC.
208 config SPL_SYS_THUMB_BUILD
209 bool "Build SPL using the Thumb instruction set"
210 default y if SYS_THUMB_BUILD
213 Use this flag to build SPL using the Thumb instruction set for
214 ARM architectures. Thumb instruction set provides better code
215 density. For ARM architectures that support Thumb2 this flag will
216 result in Thumb2 code generated by GCC.
218 config SYS_L2CACHE_OFF
221 If SoC does not support L2CACHE or one do not want to enable
222 L2CACHE, choose this option.
224 config ENABLE_ARM_SOC_BOOT0_HOOK
225 bool "prepare BOOT0 header"
227 If the SoC's BOOT0 requires a header area filled with (magic)
228 values, then choose this option, and create a define called
229 ARM_SOC_BOOT0_HOOK which contains the required assembler
232 config ARM_CORTEX_CPU_IS_UP
236 config USE_ARCH_MEMCPY
237 bool "Use an assembly optimized implementation of memcpy"
241 Enable the generation of an optimized version of memcpy.
242 Such implementation may be faster under some conditions
243 but may increase the binary size.
245 config SPL_USE_ARCH_MEMCPY
246 bool "Use an assembly optimized implementation of memcpy"
247 default y if USE_ARCH_MEMCPY
250 Enable the generation of an optimized version of memcpy.
251 Such implementation may be faster under some conditions
252 but may increase the binary size.
254 config USE_ARCH_MEMSET
255 bool "Use an assembly optimized implementation of memset"
259 Enable the generation of an optimized version of memset.
260 Such implementation may be faster under some conditions
261 but may increase the binary size.
263 config SPL_USE_ARCH_MEMSET
264 bool "Use an assembly optimized implementation of memset"
265 default y if USE_ARCH_MEMSET
268 Enable the generation of an optimized version of memset.
269 Such implementation may be faster under some conditions
270 but may increase the binary size.
272 config ARM64_SUPPORT_AARCH32
273 bool "ARM64 system support AArch32 execution state"
274 default y if ARM64 && !TARGET_THUNDERX_88XX
276 This ARM64 system supports AArch32 execution state.
279 prompt "Target select"
284 select SPL_BOARD_INIT if SPL
286 config TARGET_EDB93XX
287 bool "Support edb93xx"
290 config TARGET_ASPENITE
291 bool "Support aspenite"
295 bool "Support gplugd"
302 Support for TI's DaVinci platform.
305 bool "Marvell Kirkwood"
307 select BOARD_EARLY_INIT_F
308 select ARCH_MISC_INIT
311 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
320 config TARGET_DEVKIT3250
321 bool "Support devkit3250"
325 config TARGET_WORK_92105
326 bool "Support work_92105"
330 config TARGET_MX25PDK
331 bool "Support mx25pdk"
332 select BOARD_LATE_INIT
334 select BOARD_EARLY_INIT_F
338 select BOARD_LATE_INIT
346 config TARGET_APX4DEVKIT
347 bool "Support apx4devkit"
357 bool "Support m28evk"
361 config TARGET_MX23EVK
362 bool "Support mx23evk"
365 select BOARD_EARLY_INIT_F
367 config TARGET_MX28EVK
368 bool "Support mx28evk"
371 select BOARD_EARLY_INIT_F
373 config TARGET_MX23_OLINUXINO
374 bool "Support mx23_olinuxino"
377 select BOARD_EARLY_INIT_F
380 bool "Support bg0900"
384 config TARGET_SANSA_FUZE_PLUS
385 bool "Support sansa_fuze_plus"
389 config TARGET_SC_SPS_1
390 bool "Support sc_sps_1"
398 config TARGET_SPEAR300
399 bool "Support spear300"
401 select BOARD_EARLY_INIT_F
403 config TARGET_SPEAR310
404 bool "Support spear310"
406 select BOARD_EARLY_INIT_F
408 config TARGET_SPEAR320
409 bool "Support spear320"
411 select BOARD_EARLY_INIT_F
413 config TARGET_SPEAR600
414 bool "Support spear600"
416 select BOARD_EARLY_INIT_F
418 config TARGET_STV0991
419 bool "Support stv0991"
429 select BOARD_LATE_INIT
433 config TARGET_IMX31_PHYCORE
434 bool "Support imx31_phycore_eet"
436 select BOARD_EARLY_INIT_F
438 config TARGET_IMX31_PHYCORE_EET
439 bool "Support imx31_phycore_eet"
440 select BOARD_LATE_INIT
442 select BOARD_EARLY_INIT_F
444 config TARGET_MX31ADS
445 bool "Support mx31ads"
447 select BOARD_EARLY_INIT_F
449 config TARGET_MX31PDK
450 bool "Support mx31pdk"
451 select BOARD_LATE_INIT
454 select BOARD_EARLY_INIT_F
456 config TARGET_WOODBURN
457 bool "Support woodburn"
460 config TARGET_WOODBURN_SD
461 bool "Support woodburn_sd"
469 config TARGET_MX35PDK
470 bool "Support mx35pdk"
471 select BOARD_LATE_INIT
475 bool "Broadcom BCM283X family"
481 config TARGET_VEXPRESS_CA15_TC2
482 bool "Support vexpress_ca15_tc2"
484 select CPU_V7_HAS_NONSEC
485 select CPU_V7_HAS_VIRT
487 config TARGET_VEXPRESS_CA5X2
488 bool "Support vexpress_ca5x2"
491 config TARGET_VEXPRESS_CA9X4
492 bool "Support vexpress_ca9x4"
495 config TARGET_BCM23550_W1D
496 bool "Support bcm23550_w1d"
499 config TARGET_BCM28155_AP
500 bool "Support bcm28155_ap"
503 config TARGET_BCMCYGNUS
504 bool "Support bcmcygnus"
509 bool "Support bcmnsp"
513 bool "Support Broadcom Northstar2"
516 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
517 ARMv8 Cortex-A57 processors targeting a broad range of networking
521 bool "Samsung EXYNOS"
531 bool "Samsung S5PC1XX"
539 bool "Calxeda Highbank"
542 config ARCH_INTEGRATOR
543 bool "ARM Ltd. Integrator family"
551 select SYS_THUMB_BUILD
555 config ARCH_OMAP2PLUS
558 select SPL_BOARD_INIT if SPL
565 Support for the Meson SoC family developed by Amlogic Inc.,
566 targeted at media players and tablet computers. We currently
567 support the S905 (GXBaby) 64-bit SoC.
572 select ROM_UNIFIED_SECTIONS
577 select SYS_FSL_HAS_SEC if SECURE_BOOT
578 select SYS_FSL_SEC_COMPAT_4
579 select SYS_FSL_SEC_LE
580 select BOARD_EARLY_INIT_F
581 select ARCH_MISC_INIT
586 select SYS_FSL_HAS_SEC if SECURE_BOOT
587 select SYS_FSL_SEC_COMPAT_4
588 select SYS_FSL_SEC_LE
589 select SYS_THUMB_BUILD if SPL
594 select BOARD_EARLY_INIT_F
597 bool "Renesas ARM SoCs"
600 select BOARD_EARLY_INIT_F
601 imply SYS_THUMB_BUILD
603 config TARGET_S32V234EVB
604 bool "Support s32v234evb"
606 select SYS_FSL_ERRATUM_ESDHC111
608 config ARCH_SNAPDRAGON
609 bool "Qualcomm Snapdragon SoCs"
619 bool "Altera SOCFPGA family"
623 select SPL_OF_CONTROL
627 select ENABLE_ARM_SOC_BOOT0_HOOK
628 select ARCH_EARLY_INIT_R
629 select ARCH_MISC_INIT
630 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
631 select SYS_THUMB_BUILD
634 bool "Support sunxi (Allwinner) SoCs"
636 select CMD_MMC if MMC
637 select CMD_USB if DISTRO_DEFAULTS
643 select DM_USB if DISTRO_DEFAULTS
644 select OF_BOARD_SETUP
647 select SPL_STACK_R if SUPPORT_SPL
648 select SPL_SYS_MALLOC_SIMPLE if SUPPORT_SPL
650 select SPL_SYS_THUMB_BUILD if !ARM64
651 select USB if DISTRO_DEFAULTS
652 select USB_STORAGE if DISTRO_DEFAULTS
653 select USB_KEYBOARD if DISTRO_DEFAULTS
654 select USE_TINY_PRINTF
655 imply PRE_CONSOLE_BUFFER
656 imply SPL_GPIO_SUPPORT
657 imply SPL_LIBCOMMON_SUPPORT
658 imply SPL_LIBDISK_SUPPORT
659 imply SPL_LIBGENERIC_SUPPORT
660 imply SPL_MMC_SUPPORT if MMC
661 imply SPL_POWER_SUPPORT
662 imply SPL_SERIAL_SUPPORT
665 bool "Support TS4600"
670 bool "Freescale Vybrid"
672 select SYS_FSL_ERRATUM_ESDHC111
675 bool "Xilinx Zynq Platform"
676 select BOARD_LATE_INIT
680 select SPL_BOARD_INIT if SPL
681 select SPL_OF_CONTROL if SPL
691 select SPL_SEPARATE_BSS if SPL
700 bool "Support Xilinx ZynqMP Platform"
702 select BOARD_LATE_INIT
708 select SPL_BOARD_INIT if SPL
715 config TARGET_VEXPRESS64_AEMV8A
716 bool "Support vexpress_aemv8a"
719 config TARGET_VEXPRESS64_BASE_FVP
720 bool "Support Versatile Express ARMv8a FVP BASE model"
724 config TARGET_VEXPRESS64_BASE_FVP_DRAM
725 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
728 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
729 the default config to allow the user to load the images directly into
730 DRAM using model parameters rather than by using semi-hosting to load
731 the files from the host filesystem.
733 config TARGET_VEXPRESS64_JUNO
734 bool "Support Versatile Express Juno Development Platform"
737 config TARGET_LS2080A_EMU
738 bool "Support ls2080a_emu"
741 select ARMV8_MULTIENTRY
742 select ARCH_MISC_INIT
744 Support for Freescale LS2080A_EMU platform
745 The LS2080A Development System (EMULATOR) is a pre silicon
746 development platform that supports the QorIQ LS2080A
747 Layerscape Architecture processor.
749 config TARGET_LS2080A_SIMU
750 bool "Support ls2080a_simu"
753 select ARMV8_MULTIENTRY
754 select ARCH_MISC_INIT
756 Support for Freescale LS2080A_SIMU platform
757 The LS2080A Development System (QDS) is a pre silicon
758 development platform that supports the QorIQ LS2080A
759 Layerscape Architecture processor.
761 config TARGET_LS2080AQDS
762 bool "Support ls2080aqds"
765 select ARMV8_MULTIENTRY
766 select BOARD_LATE_INIT
768 select ARCH_MISC_INIT
770 Support for Freescale LS2080AQDS platform
771 The LS2080A Development System (QDS) is a high-performance
772 development platform that supports the QorIQ LS2080A
773 Layerscape Architecture processor.
775 config TARGET_LS2080ARDB
776 bool "Support ls2080ardb"
779 select ARMV8_MULTIENTRY
780 select BOARD_LATE_INIT
782 select ARCH_MISC_INIT
784 Support for Freescale LS2080ARDB platform.
785 The LS2080A Reference design board (RDB) is a high-performance
786 development platform that supports the QorIQ LS2080A
787 Layerscape Architecture processor.
790 bool "Support HiKey 96boards Consumer Edition Platform"
797 Support for HiKey 96boards platform. It features a HI6220
798 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
800 config TARGET_LS1012AQDS
801 bool "Support ls1012aqds"
804 select BOARD_LATE_INIT
806 Support for Freescale LS1012AQDS platform.
807 The LS1012A Development System (QDS) is a high-performance
808 development platform that supports the QorIQ LS1012A
809 Layerscape Architecture processor.
811 config TARGET_LS1012ARDB
812 bool "Support ls1012ardb"
815 select BOARD_LATE_INIT
817 Support for Freescale LS1012ARDB platform.
818 The LS1012A Reference design board (RDB) is a high-performance
819 development platform that supports the QorIQ LS1012A
820 Layerscape Architecture processor.
822 config TARGET_LS1012AFRDM
823 bool "Support ls1012afrdm"
827 Support for Freescale LS1012AFRDM platform.
828 The LS1012A Freedom board (FRDM) is a high-performance
829 development platform that supports the QorIQ LS1012A
830 Layerscape Architecture processor.
832 config TARGET_LS1021AQDS
833 bool "Support ls1021aqds"
834 select BOARD_LATE_INIT
836 select CPU_V7_HAS_NONSEC
837 select CPU_V7_HAS_VIRT
840 select ARCH_SUPPORT_PSCI
841 select LS1_DEEP_SLEEP
843 select BOARD_EARLY_INIT_F
845 config TARGET_LS1021ATWR
846 bool "Support ls1021atwr"
847 select BOARD_LATE_INIT
849 select CPU_V7_HAS_NONSEC
850 select CPU_V7_HAS_VIRT
853 select ARCH_SUPPORT_PSCI
854 select LS1_DEEP_SLEEP
855 select BOARD_EARLY_INIT_F
857 config TARGET_LS1021AIOT
858 bool "Support ls1021aiot"
859 select BOARD_LATE_INIT
861 select CPU_V7_HAS_NONSEC
862 select CPU_V7_HAS_VIRT
865 select ARCH_SUPPORT_PSCI
867 Support for Freescale LS1021AIOT platform.
868 The LS1021A Freescale board (IOT) is a high-performance
869 development platform that supports the QorIQ LS1021A
870 Layerscape Architecture processor.
872 config TARGET_LS1043AQDS
873 bool "Support ls1043aqds"
876 select ARMV8_MULTIENTRY
877 select BOARD_LATE_INIT
879 select BOARD_EARLY_INIT_F
881 Support for Freescale LS1043AQDS platform.
883 config TARGET_LS1043ARDB
884 bool "Support ls1043ardb"
887 select ARMV8_MULTIENTRY
888 select BOARD_LATE_INIT
890 select BOARD_EARLY_INIT_F
892 Support for Freescale LS1043ARDB platform.
894 config TARGET_LS1046AQDS
895 bool "Support ls1046aqds"
898 select ARMV8_MULTIENTRY
899 select BOARD_LATE_INIT
901 select DM_SPI_FLASH if DM_SPI
902 select BOARD_EARLY_INIT_F
904 Support for Freescale LS1046AQDS platform.
905 The LS1046A Development System (QDS) is a high-performance
906 development platform that supports the QorIQ LS1046A
907 Layerscape Architecture processor.
909 config TARGET_LS1046ARDB
910 bool "Support ls1046ardb"
913 select ARMV8_MULTIENTRY
914 select BOARD_LATE_INIT
916 select DM_SPI_FLASH if DM_SPI
917 select POWER_MC34VR500
918 select BOARD_EARLY_INIT_F
920 Support for Freescale LS1046ARDB platform.
921 The LS1046A Reference Design Board (RDB) is a high-performance
922 development platform that supports the QorIQ LS1046A
923 Layerscape Architecture processor.
929 config TARGET_ZIPITZ2
930 bool "Support zipitz2"
933 config TARGET_COLIBRI_PXA270
934 bool "Support colibri_pxa270"
938 bool "Socionext UniPhier SoCs"
939 select BOARD_LATE_INIT
951 select SPL_BOARD_INIT if SPL
953 select SPL_LIBCOMMON_SUPPORT if SPL
954 select SPL_LIBGENERIC_SUPPORT if SPL
955 select SPL_OF_CONTROL if SPL
956 select SPL_PINCTRL if SPL
959 Support for UniPhier SoC family developed by Socionext Inc.
960 (formerly, System LSI Business Division of Panasonic Corporation)
967 select SYS_THUMB_BUILD
970 bool "Support STMicrolectronics SoCs"
978 Support for STMicroelectronics STiH407/10 SoC family.
979 This SoC is used on Linaro 96Board STiH410-B2260
982 bool "Support Rockchip SoCs"
988 select SYS_THUMB_BUILD if !ARM64
989 select SPL_SYS_MALLOC_SIMPLE if SPL
1001 config TARGET_THUNDERX_88XX
1002 bool "Support ThunderX 88xx"
1005 select SYS_CACHE_SHIFT_7
1008 bool "Support Aspeed SoCs"
1014 source "arch/arm/mach-aspeed/Kconfig"
1016 source "arch/arm/mach-at91/Kconfig"
1018 source "arch/arm/mach-bcm283x/Kconfig"
1020 source "arch/arm/mach-davinci/Kconfig"
1022 source "arch/arm/mach-exynos/Kconfig"
1024 source "arch/arm/mach-highbank/Kconfig"
1026 source "arch/arm/mach-integrator/Kconfig"
1028 source "arch/arm/mach-keystone/Kconfig"
1030 source "arch/arm/mach-kirkwood/Kconfig"
1032 source "arch/arm/mach-mvebu/Kconfig"
1034 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1036 source "arch/arm/cpu/armv7/mx7ulp/Kconfig"
1038 source "arch/arm/cpu/armv7/mx7/Kconfig"
1040 source "arch/arm/cpu/armv7/mx6/Kconfig"
1042 source "arch/arm/cpu/armv7/mx5/Kconfig"
1044 source "arch/arm/mach-omap2/Kconfig"
1046 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1048 source "arch/arm/mach-orion5x/Kconfig"
1050 source "arch/arm/mach-rmobile/Kconfig"
1052 source "arch/arm/mach-meson/Kconfig"
1054 source "arch/arm/mach-rockchip/Kconfig"
1056 source "arch/arm/mach-s5pc1xx/Kconfig"
1058 source "arch/arm/mach-snapdragon/Kconfig"
1060 source "arch/arm/mach-socfpga/Kconfig"
1062 source "arch/arm/mach-sti/Kconfig"
1064 source "arch/arm/mach-stm32/Kconfig"
1066 source "arch/arm/mach-sunxi/Kconfig"
1068 source "arch/arm/mach-tegra/Kconfig"
1070 source "arch/arm/mach-uniphier/Kconfig"
1072 source "arch/arm/cpu/armv7/vf610/Kconfig"
1074 source "arch/arm/mach-zynq/Kconfig"
1076 source "arch/arm/cpu/armv7/Kconfig"
1078 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1080 source "arch/arm/cpu/armv8/Kconfig"
1082 source "arch/arm/imx-common/Kconfig"
1084 source "board/aries/m28evk/Kconfig"
1085 source "board/bosch/shc/Kconfig"
1086 source "board/CarMediaLab/flea3/Kconfig"
1087 source "board/Marvell/aspenite/Kconfig"
1088 source "board/Marvell/gplugd/Kconfig"
1089 source "board/armadeus/apf27/Kconfig"
1090 source "board/armltd/vexpress/Kconfig"
1091 source "board/armltd/vexpress64/Kconfig"
1092 source "board/bluegiga/apx4devkit/Kconfig"
1093 source "board/broadcom/bcm23550_w1d/Kconfig"
1094 source "board/broadcom/bcm28155_ap/Kconfig"
1095 source "board/broadcom/bcmcygnus/Kconfig"
1096 source "board/broadcom/bcmnsp/Kconfig"
1097 source "board/broadcom/bcmns2/Kconfig"
1098 source "board/cavium/thunderx/Kconfig"
1099 source "board/cirrus/edb93xx/Kconfig"
1100 source "board/creative/xfi3/Kconfig"
1101 source "board/freescale/ls2080a/Kconfig"
1102 source "board/freescale/ls2080aqds/Kconfig"
1103 source "board/freescale/ls2080ardb/Kconfig"
1104 source "board/freescale/ls1021aqds/Kconfig"
1105 source "board/freescale/ls1043aqds/Kconfig"
1106 source "board/freescale/ls1021atwr/Kconfig"
1107 source "board/freescale/ls1021aiot/Kconfig"
1108 source "board/freescale/ls1046aqds/Kconfig"
1109 source "board/freescale/ls1043ardb/Kconfig"
1110 source "board/freescale/ls1046ardb/Kconfig"
1111 source "board/freescale/ls1012aqds/Kconfig"
1112 source "board/freescale/ls1012ardb/Kconfig"
1113 source "board/freescale/ls1012afrdm/Kconfig"
1114 source "board/freescale/mx23evk/Kconfig"
1115 source "board/freescale/mx25pdk/Kconfig"
1116 source "board/freescale/mx28evk/Kconfig"
1117 source "board/freescale/mx31ads/Kconfig"
1118 source "board/freescale/mx31pdk/Kconfig"
1119 source "board/freescale/mx35pdk/Kconfig"
1120 source "board/freescale/s32v234evb/Kconfig"
1121 source "board/gdsys/a38x/Kconfig"
1122 source "board/grinn/chiliboard/Kconfig"
1123 source "board/gumstix/pepper/Kconfig"
1124 source "board/h2200/Kconfig"
1125 source "board/hisilicon/hikey/Kconfig"
1126 source "board/imx31_phycore/Kconfig"
1127 source "board/isee/igep003x/Kconfig"
1128 source "board/olimex/mx23_olinuxino/Kconfig"
1129 source "board/phytec/pcm051/Kconfig"
1130 source "board/ppcag/bg0900/Kconfig"
1131 source "board/sandisk/sansa_fuze_plus/Kconfig"
1132 source "board/schulercontrol/sc_sps_1/Kconfig"
1133 source "board/silica/pengwyn/Kconfig"
1134 source "board/spear/spear300/Kconfig"
1135 source "board/spear/spear310/Kconfig"
1136 source "board/spear/spear320/Kconfig"
1137 source "board/spear/spear600/Kconfig"
1138 source "board/spear/x600/Kconfig"
1139 source "board/st/stv0991/Kconfig"
1140 source "board/syteco/zmx25/Kconfig"
1141 source "board/tcl/sl50/Kconfig"
1142 source "board/birdland/bav335x/Kconfig"
1143 source "board/timll/devkit3250/Kconfig"
1144 source "board/toradex/colibri_pxa270/Kconfig"
1145 source "board/technologic/ts4600/Kconfig"
1146 source "board/vscom/baltos/Kconfig"
1147 source "board/woodburn/Kconfig"
1148 source "board/work-microwave/work_92105/Kconfig"
1149 source "board/zipitz2/Kconfig"
1151 source "arch/arm/Kconfig.debug"