]> git.sur5r.net Git - u-boot/blob - arch/arm/config.mk
armv8/ls1043aqds: Spilt off board device tree
[u-boot] / arch / arm / config.mk
1 #
2 # (C) Copyright 2000-2002
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 #
5 # SPDX-License-Identifier:      GPL-2.0+
6 #
7
8 ifndef CONFIG_STANDALONE_LOAD_ADDR
9 ifneq ($(CONFIG_OMAP_COMMON),)
10 CONFIG_STANDALONE_LOAD_ADDR = 0x80300000
11 else
12 CONFIG_STANDALONE_LOAD_ADDR = 0xc100000
13 endif
14 endif
15
16 LDFLAGS_FINAL += --gc-sections
17 PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \
18                      -fno-common -ffixed-r9
19 PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \
20       $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
21
22 PLATFORM_CPPFLAGS += -D__ARM__
23
24 # Choose between ARM/Thumb instruction sets
25 ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
26 AFLAGS_IMPLICIT_IT      := $(call as-option,-Wa$(comma)-mimplicit-it=always)
27 PF_CPPFLAGS_ARM         := $(AFLAGS_IMPLICIT_IT) \
28                         $(call cc-option, -mthumb -mthumb-interwork,\
29                         $(call cc-option,-marm,)\
30                         $(call cc-option,-mno-thumb-interwork,)\
31                 )
32 else
33 PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
34                 $(call cc-option,-mno-thumb-interwork,)
35 endif
36
37 # Only test once
38 ifneq ($(CONFIG_SPL_BUILD),y)
39 ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
40 archprepare: checkthumb
41
42 checkthumb:
43         @if test "$(call cc-version)" -lt "0404"; then \
44                 echo -n '*** Your GCC does not produce working '; \
45                 echo 'binaries in THUMB mode.'; \
46                 echo '*** Your board is configured for THUMB mode.'; \
47                 false; \
48         fi
49 endif
50 endif
51
52 # Try if EABI is supported, else fall back to old API,
53 # i. e. for example:
54 # - with ELDK 4.2 (EABI supported), use:
55 #       -mabi=aapcs-linux
56 # - with ELDK 4.1 (gcc 4.x, no EABI), use:
57 #       -mabi=apcs-gnu
58 # - with ELDK 3.1 (gcc 3.x), use:
59 #       -mapcs-32
60 PF_CPPFLAGS_ABI := $(call cc-option,\
61                         -mabi=aapcs-linux,\
62                         $(call cc-option,\
63                                 -mapcs-32,\
64                                 $(call cc-option,\
65                                         -mabi=apcs-gnu,\
66                                 )\
67                         )\
68                 )
69 PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARM) $(PF_CPPFLAGS_ABI)
70
71 # For EABI, make sure to provide raise()
72 ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
73 # This file is parsed many times, so the string may get added multiple
74 # times. Also, the prefix needs to be different based on whether
75 # CONFIG_SPL_BUILD is defined or not. 'filter-out' the existing entry
76 # before adding the correct one.
77 PLATFORM_LIBS := arch/arm/lib/eabi_compat.o \
78         $(filter-out arch/arm/lib/eabi_compat.o, $(PLATFORM_LIBS))
79 endif
80
81 # needed for relocation
82 LDFLAGS_u-boot += -pie
83
84 #
85 # FIXME: binutils versions < 2.22 have a bug in the assembler where
86 # branches to weak symbols can be incorrectly optimized in thumb mode
87 # to a short branch (b.n instruction) that won't reach when the symbol
88 # gets preempted
89 #
90 # http://sourceware.org/bugzilla/show_bug.cgi?id=12532
91 #
92 ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
93 ifeq ($(GAS_BUG_12532),)
94 export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
95         then echo y; else echo n; fi)
96 endif
97 ifeq ($(GAS_BUG_12532),y)
98 PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
99 endif
100 endif
101
102 ifneq ($(CONFIG_SPL_BUILD),y)
103 # Check that only R_ARM_RELATIVE relocations are generated.
104 ALL-y += checkarmreloc
105 # The movt / movw can hardcode 16 bit parts of the addresses in the
106 # instruction. Relocation is not supported for that case, so disable
107 # such usage by requiring word relocations.
108 PLATFORM_CPPFLAGS += $(call cc-option, -mword-relocations)
109 endif
110
111 # limit ourselves to the sections we want in the .bin.
112 ifdef CONFIG_ARM64
113 OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn
114 else
115 OBJCOPYFLAGS += -j .text -j .secure_text -j .rodata -j .hash -j .data -j \
116         .got -j .got.plt -j .u_boot_list -j .rel.dyn
117 endif
118
119 ifdef CONFIG_OF_EMBED
120 OBJCOPYFLAGS += -j .dtb.init.rodata
121 endif
122
123 ifneq ($(CONFIG_IMX_CONFIG),)
124 ifdef CONFIG_SPL
125 ifndef CONFIG_SPL_BUILD
126 ALL-y += SPL
127 endif
128 else
129 ifeq ($(CONFIG_OF_SEPARATE),y)
130 ALL-y += u-boot-dtb.imx
131 else
132 ALL-y += u-boot.imx
133 endif
134 endif
135 endif