4 * Richard Woodruff <r-woodruff2@ti.com>
7 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
8 * Marius Groeger <mgroeger@sysgo.de>
9 * Alex Zuepke <azu@sysgo.de>
12 * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
14 * See file CREDITS for list of people who contributed to this
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License as
19 * published by the Free Software Foundation; either version 2 of
20 * the License, or (at your option) any later version.
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
27 * You should have received a copy of the GNU General Public License
28 * along with this program; if not, write to the Free Software
29 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
34 #include <asm/arch/bits.h>
35 #include <asm/arch/omap2420.h>
37 #define TIMER_LOAD_VAL 0
39 /* macro to read the 32 bit timer */
40 #define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR)))
42 DECLARE_GLOBAL_DATA_PTR;
48 /* Start the counter ticking up */
49 *((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/
50 val = (CONFIG_SYS_PTV << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/
51 *((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val; /* start timer */
53 reset_timer_masked(); /* init the timestamp and lastinc value */
58 * timer without interrupts
60 void reset_timer (void)
62 reset_timer_masked ();
65 ulong get_timer (ulong base)
67 return get_timer_masked () - base;
70 void set_timer (ulong t)
75 /* delay x useconds AND preserve advance timestamp value */
76 void __udelay (unsigned long usec)
80 if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
81 tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
82 tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
83 tmo /= 1000; /* finish normalize. */
84 } else { /* else small number, don't kill it prior to HZ multiply */
85 tmo = usec * CONFIG_SYS_HZ;
89 tmp = get_timer (0); /* get current timestamp */
90 if ( (tmo + tmp + 1) < tmp ) /* if setting this forward will roll time stamp */
91 reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastinc value */
93 tmo += tmp; /* else, set advancing stamp wake up time */
94 while (get_timer_masked () < tmo)/* loop till event */
98 void reset_timer_masked (void)
101 gd->lastinc = READ_TIMER; /* capture current incrementer value time */
102 gd->tbl = 0; /* start "advancing" time stamp from 0 */
105 ulong get_timer_masked (void)
107 ulong now = READ_TIMER; /* current tick value */
109 if (now >= gd->lastinc) /* normal mode (non roll) */
110 gd->tbl += (now - gd->lastinc); /* move stamp fordward with absoulte diff ticks */
111 else /* we have rollover of incrementer */
112 gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
117 /* waits specified delay value and resets timestamp */
118 void udelay_masked (unsigned long usec)
124 if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
125 tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
126 tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
127 tmo /= 1000; /* finish normalize. */
128 } else { /* else small number, don't kill it prior to HZ multiply */
129 tmo = usec * CONFIG_SYS_HZ;
132 endtime = get_timer_masked () + tmo;
135 ulong now = get_timer_masked ();
136 diff = endtime - now;
141 * This function is derived from PowerPC code (read timebase as long long).
142 * On ARM it just returns the timer value.
144 unsigned long long get_ticks(void)
149 * This function is derived from PowerPC code (timebase clock frequency).
150 * On ARM it returns the number of timer ticks per second.
152 ulong get_tbclk (void)
155 tbclk = CONFIG_SYS_HZ;