]> git.sur5r.net Git - u-boot/blob - arch/arm/cpu/arm926ejs/mx28/spl_power_init.c
Merge branch 'master' of git://git.denx.de/u-boot-net
[u-boot] / arch / arm / cpu / arm926ejs / mx28 / spl_power_init.c
1 /*
2  * Freescale i.MX28 Boot PMIC init
3  *
4  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
5  * on behalf of DENX Software Engineering GmbH
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #include <common.h>
27 #include <config.h>
28 #include <asm/io.h>
29 #include <asm/arch/imx-regs.h>
30
31 #include "mx28_init.h"
32
33 void mx28_power_clock2xtal(void)
34 {
35         struct mx28_clkctrl_regs *clkctrl_regs =
36                 (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
37
38         /* Set XTAL as CPU reference clock */
39         writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
40                 &clkctrl_regs->hw_clkctrl_clkseq_set);
41 }
42
43 void mx28_power_clock2pll(void)
44 {
45         struct mx28_clkctrl_regs *clkctrl_regs =
46                 (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
47
48         setbits_le32(&clkctrl_regs->hw_clkctrl_pll0ctrl0,
49                         CLKCTRL_PLL0CTRL0_POWER);
50         early_delay(100);
51         setbits_le32(&clkctrl_regs->hw_clkctrl_clkseq,
52                         CLKCTRL_CLKSEQ_BYPASS_CPU);
53 }
54
55 void mx28_power_clear_auto_restart(void)
56 {
57         struct mx28_rtc_regs *rtc_regs =
58                 (struct mx28_rtc_regs *)MXS_RTC_BASE;
59
60         writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
61         while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
62                 ;
63
64         writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
65         while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
66                 ;
67
68         /*
69          * Due to the hardware design bug of mx28 EVK-A
70          * we need to set the AUTO_RESTART bit.
71          */
72         if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
73                 return;
74
75         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
76                 ;
77
78         setbits_le32(&rtc_regs->hw_rtc_persistent0,
79                         RTC_PERSISTENT0_AUTO_RESTART);
80         writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
81         writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
82         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
83                 ;
84         while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
85                 ;
86 }
87
88 void mx28_power_set_linreg(void)
89 {
90         struct mx28_power_regs *power_regs =
91                 (struct mx28_power_regs *)MXS_POWER_BASE;
92
93         /* Set linear regulator 25mV below switching converter */
94         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
95                         POWER_VDDDCTRL_LINREG_OFFSET_MASK,
96                         POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
97
98         clrsetbits_le32(&power_regs->hw_power_vddactrl,
99                         POWER_VDDACTRL_LINREG_OFFSET_MASK,
100                         POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
101
102         clrsetbits_le32(&power_regs->hw_power_vddioctrl,
103                         POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
104                         POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
105 }
106
107 int mx28_get_batt_volt(void)
108 {
109         struct mx28_power_regs *power_regs =
110                 (struct mx28_power_regs *)MXS_POWER_BASE;
111         uint32_t volt = readl(&power_regs->hw_power_battmonitor);
112         volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
113         volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
114         volt *= 8;
115         return volt;
116 }
117
118 int mx28_is_batt_ready(void)
119 {
120         return (mx28_get_batt_volt() >= 3600);
121 }
122
123 int mx28_is_batt_good(void)
124 {
125         struct mx28_power_regs *power_regs =
126                 (struct mx28_power_regs *)MXS_POWER_BASE;
127         uint32_t volt = mx28_get_batt_volt();
128
129         if ((volt >= 2400) && (volt <= 4300))
130                 return 1;
131
132         clrsetbits_le32(&power_regs->hw_power_5vctrl,
133                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
134                 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
135         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
136                 &power_regs->hw_power_5vctrl_clr);
137
138         clrsetbits_le32(&power_regs->hw_power_charge,
139                 POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
140                 POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
141
142         writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
143         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
144                 &power_regs->hw_power_5vctrl_clr);
145
146         early_delay(500000);
147
148         volt = mx28_get_batt_volt();
149
150         if (volt >= 3500)
151                 return 0;
152
153         if (volt >= 2400)
154                 return 1;
155
156         writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
157                 &power_regs->hw_power_charge_clr);
158         writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
159
160         return 0;
161 }
162
163 void mx28_power_setup_5v_detect(void)
164 {
165         struct mx28_power_regs *power_regs =
166                 (struct mx28_power_regs *)MXS_POWER_BASE;
167
168         /* Start 5V detection */
169         clrsetbits_le32(&power_regs->hw_power_5vctrl,
170                         POWER_5VCTRL_VBUSVALID_TRSH_MASK,
171                         POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
172                         POWER_5VCTRL_PWRUP_VBUS_CMPS);
173 }
174
175 void mx28_src_power_init(void)
176 {
177         struct mx28_power_regs *power_regs =
178                 (struct mx28_power_regs *)MXS_POWER_BASE;
179
180         /* Improve efficieny and reduce transient ripple */
181         writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
182                 POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
183
184         clrsetbits_le32(&power_regs->hw_power_dclimits,
185                         POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
186                         0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
187
188         setbits_le32(&power_regs->hw_power_battmonitor,
189                         POWER_BATTMONITOR_EN_BATADJ);
190
191         /* Increase the RCSCALE level for quick DCDC response to dynamic load */
192         clrsetbits_le32(&power_regs->hw_power_loopctrl,
193                         POWER_LOOPCTRL_EN_RCSCALE_MASK,
194                         POWER_LOOPCTRL_RCSCALE_THRESH |
195                         POWER_LOOPCTRL_EN_RCSCALE_8X);
196
197         clrsetbits_le32(&power_regs->hw_power_minpwr,
198                         POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
199
200         /* 5V to battery handoff ... FIXME */
201         setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
202         early_delay(30);
203         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
204 }
205
206 void mx28_power_init_4p2_params(void)
207 {
208         struct mx28_power_regs *power_regs =
209                 (struct mx28_power_regs *)MXS_POWER_BASE;
210
211         /* Setup 4P2 parameters */
212         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
213                 POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
214                 POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
215
216         clrsetbits_le32(&power_regs->hw_power_5vctrl,
217                 POWER_5VCTRL_HEADROOM_ADJ_MASK,
218                 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
219
220         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
221                 POWER_DCDC4P2_DROPOUT_CTRL_MASK,
222                 POWER_DCDC4P2_DROPOUT_CTRL_100MV |
223                 POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
224
225         clrsetbits_le32(&power_regs->hw_power_5vctrl,
226                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
227                 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
228 }
229
230 void mx28_enable_4p2_dcdc_input(int xfer)
231 {
232         struct mx28_power_regs *power_regs =
233                 (struct mx28_power_regs *)MXS_POWER_BASE;
234         uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
235         uint32_t prev_5v_brnout, prev_5v_droop;
236
237         prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
238                                 POWER_5VCTRL_PWDN_5VBRNOUT;
239         prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
240                                 POWER_CTRL_ENIRQ_VDD5V_DROOP;
241
242         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
243         writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
244                 &power_regs->hw_power_reset);
245
246         clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
247
248         if (xfer && (readl(&power_regs->hw_power_5vctrl) &
249                         POWER_5VCTRL_ENABLE_DCDC)) {
250                 return;
251         }
252
253         /*
254          * Recording orignal values that will be modified temporarlily
255          * to handle a chip bug. See chip errata for CQ ENGR00115837
256          */
257         tmp = readl(&power_regs->hw_power_5vctrl);
258         vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
259         vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
260
261         pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
262
263         /*
264          * Disable mechanisms that get erroneously tripped by when setting
265          * the DCDC4P2 EN_DCDC
266          */
267         clrbits_le32(&power_regs->hw_power_5vctrl,
268                 POWER_5VCTRL_VBUSVALID_5VDETECT |
269                 POWER_5VCTRL_VBUSVALID_TRSH_MASK);
270
271         writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
272
273         if (xfer) {
274                 setbits_le32(&power_regs->hw_power_5vctrl,
275                                 POWER_5VCTRL_DCDC_XFER);
276                 early_delay(20);
277                 clrbits_le32(&power_regs->hw_power_5vctrl,
278                                 POWER_5VCTRL_DCDC_XFER);
279
280                 setbits_le32(&power_regs->hw_power_5vctrl,
281                                 POWER_5VCTRL_ENABLE_DCDC);
282         } else {
283                 setbits_le32(&power_regs->hw_power_dcdc4p2,
284                                 POWER_DCDC4P2_ENABLE_DCDC);
285         }
286
287         early_delay(25);
288
289         clrsetbits_le32(&power_regs->hw_power_5vctrl,
290                         POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
291
292         if (vbus_5vdetect)
293                 writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
294
295         if (!pwd_bo)
296                 clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
297
298         while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
299                 writel(POWER_CTRL_VBUS_VALID_IRQ,
300                         &power_regs->hw_power_ctrl_clr);
301
302         if (prev_5v_brnout) {
303                 writel(POWER_5VCTRL_PWDN_5VBRNOUT,
304                         &power_regs->hw_power_5vctrl_set);
305                 writel(POWER_RESET_UNLOCK_KEY,
306                         &power_regs->hw_power_reset);
307         } else {
308                 writel(POWER_5VCTRL_PWDN_5VBRNOUT,
309                         &power_regs->hw_power_5vctrl_clr);
310                 writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
311                         &power_regs->hw_power_reset);
312         }
313
314         while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
315                 writel(POWER_CTRL_VDD5V_DROOP_IRQ,
316                         &power_regs->hw_power_ctrl_clr);
317
318         if (prev_5v_droop)
319                 clrbits_le32(&power_regs->hw_power_ctrl,
320                                 POWER_CTRL_ENIRQ_VDD5V_DROOP);
321         else
322                 setbits_le32(&power_regs->hw_power_ctrl,
323                                 POWER_CTRL_ENIRQ_VDD5V_DROOP);
324 }
325
326 void mx28_power_init_4p2_regulator(void)
327 {
328         struct mx28_power_regs *power_regs =
329                 (struct mx28_power_regs *)MXS_POWER_BASE;
330         uint32_t tmp, tmp2;
331
332         setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
333
334         writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
335
336         writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
337                 &power_regs->hw_power_5vctrl_clr);
338         clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
339
340         /* Power up the 4p2 rail and logic/control */
341         writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
342                 &power_regs->hw_power_5vctrl_clr);
343
344         /*
345          * Start charging up the 4p2 capacitor. We ramp of this charge
346          * gradually to avoid large inrush current from the 5V cable which can
347          * cause transients/problems
348          */
349         mx28_enable_4p2_dcdc_input(0);
350
351         if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
352                 /*
353                  * If we arrived here, we were unable to recover from mx23 chip
354                  * errata 5837. 4P2 is disabled and sufficient battery power is
355                  * not present. Exiting to not enable DCDC power during 5V
356                  * connected state.
357                  */
358                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
359                         POWER_DCDC4P2_ENABLE_DCDC);
360                 writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
361                         &power_regs->hw_power_5vctrl_set);
362                 hang();
363         }
364
365         /*
366          * Here we set the 4p2 brownout level to something very close to 4.2V.
367          * We then check the brownout status. If the brownout status is false,
368          * the voltage is already close to the target voltage of 4.2V so we
369          * can go ahead and set the 4P2 current limit to our max target limit.
370          * If the brownout status is true, we need to ramp us the current limit
371          * so that we don't cause large inrush current issues. We step up the
372          * current limit until the brownout status is false or until we've
373          * reached our maximum defined 4p2 current limit.
374          */
375         clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
376                         POWER_DCDC4P2_BO_MASK,
377                         22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
378
379         if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
380                 setbits_le32(&power_regs->hw_power_5vctrl,
381                         0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
382         } else {
383                 tmp = (readl(&power_regs->hw_power_5vctrl) &
384                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
385                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
386                 while (tmp < 0x3f) {
387                         if (!(readl(&power_regs->hw_power_sts) &
388                                         POWER_STS_DCDC_4P2_BO)) {
389                                 tmp = readl(&power_regs->hw_power_5vctrl);
390                                 tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
391                                 early_delay(100);
392                                 writel(tmp, &power_regs->hw_power_5vctrl);
393                                 break;
394                         } else {
395                                 tmp++;
396                                 tmp2 = readl(&power_regs->hw_power_5vctrl);
397                                 tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
398                                 tmp2 |= tmp <<
399                                         POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
400                                 writel(tmp2, &power_regs->hw_power_5vctrl);
401                                 early_delay(100);
402                         }
403                 }
404         }
405
406         clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
407         writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
408 }
409
410 void mx28_power_init_dcdc_4p2_source(void)
411 {
412         struct mx28_power_regs *power_regs =
413                 (struct mx28_power_regs *)MXS_POWER_BASE;
414
415         if (!(readl(&power_regs->hw_power_dcdc4p2) &
416                 POWER_DCDC4P2_ENABLE_DCDC)) {
417                 hang();
418         }
419
420         mx28_enable_4p2_dcdc_input(1);
421
422         if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
423                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
424                         POWER_DCDC4P2_ENABLE_DCDC);
425                 writel(POWER_5VCTRL_ENABLE_DCDC,
426                         &power_regs->hw_power_5vctrl_clr);
427                 writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
428                         &power_regs->hw_power_5vctrl_set);
429         }
430 }
431
432 void mx28_power_enable_4p2(void)
433 {
434         struct mx28_power_regs *power_regs =
435                 (struct mx28_power_regs *)MXS_POWER_BASE;
436         uint32_t vdddctrl, vddactrl, vddioctrl;
437         uint32_t tmp;
438
439         vdddctrl = readl(&power_regs->hw_power_vdddctrl);
440         vddactrl = readl(&power_regs->hw_power_vddactrl);
441         vddioctrl = readl(&power_regs->hw_power_vddioctrl);
442
443         setbits_le32(&power_regs->hw_power_vdddctrl,
444                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
445                 POWER_VDDDCTRL_PWDN_BRNOUT);
446
447         setbits_le32(&power_regs->hw_power_vddactrl,
448                 POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
449                 POWER_VDDACTRL_PWDN_BRNOUT);
450
451         setbits_le32(&power_regs->hw_power_vddioctrl,
452                 POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
453
454         mx28_power_init_4p2_params();
455         mx28_power_init_4p2_regulator();
456
457         /* Shutdown battery (none present) */
458         if (!mx28_is_batt_ready()) {
459                 clrbits_le32(&power_regs->hw_power_dcdc4p2,
460                                 POWER_DCDC4P2_BO_MASK);
461                 writel(POWER_CTRL_DCDC4P2_BO_IRQ,
462                                 &power_regs->hw_power_ctrl_clr);
463                 writel(POWER_CTRL_ENIRQ_DCDC4P2_BO,
464                                 &power_regs->hw_power_ctrl_clr);
465         }
466
467         mx28_power_init_dcdc_4p2_source();
468
469         writel(vdddctrl, &power_regs->hw_power_vdddctrl);
470         early_delay(20);
471         writel(vddactrl, &power_regs->hw_power_vddactrl);
472         early_delay(20);
473         writel(vddioctrl, &power_regs->hw_power_vddioctrl);
474
475         /*
476          * Check if FET is enabled on either powerout and if so,
477          * disable load.
478          */
479         tmp = 0;
480         tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
481                         POWER_VDDDCTRL_DISABLE_FET);
482         tmp |= !(readl(&power_regs->hw_power_vddactrl) &
483                         POWER_VDDACTRL_DISABLE_FET);
484         tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
485                         POWER_VDDIOCTRL_DISABLE_FET);
486         if (tmp)
487                 writel(POWER_CHARGE_ENABLE_LOAD,
488                         &power_regs->hw_power_charge_clr);
489 }
490
491 void mx28_boot_valid_5v(void)
492 {
493         struct mx28_power_regs *power_regs =
494                 (struct mx28_power_regs *)MXS_POWER_BASE;
495
496         /*
497          * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
498          * disconnect event. FIXME
499          */
500         writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
501                 &power_regs->hw_power_5vctrl_set);
502
503         /* Configure polarity to check for 5V disconnection. */
504         writel(POWER_CTRL_POLARITY_VBUSVALID |
505                 POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
506                 &power_regs->hw_power_ctrl_clr);
507
508         writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
509                 &power_regs->hw_power_ctrl_clr);
510
511         mx28_power_enable_4p2();
512 }
513
514 void mx28_powerdown(void)
515 {
516         struct mx28_power_regs *power_regs =
517                 (struct mx28_power_regs *)MXS_POWER_BASE;
518         writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
519         writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
520                 &power_regs->hw_power_reset);
521 }
522
523 void mx28_batt_boot(void)
524 {
525         struct mx28_power_regs *power_regs =
526                 (struct mx28_power_regs *)MXS_POWER_BASE;
527
528         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
529         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);
530
531         clrbits_le32(&power_regs->hw_power_dcdc4p2,
532                         POWER_DCDC4P2_ENABLE_DCDC | POWER_DCDC4P2_ENABLE_4P2);
533         writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_clr);
534
535         /* 5V to battery handoff. */
536         setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
537         early_delay(30);
538         clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
539
540         writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
541
542         clrsetbits_le32(&power_regs->hw_power_minpwr,
543                         POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
544
545         mx28_power_set_linreg();
546
547         clrbits_le32(&power_regs->hw_power_vdddctrl,
548                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG);
549
550         clrbits_le32(&power_regs->hw_power_vddactrl,
551                 POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG);
552
553         clrbits_le32(&power_regs->hw_power_vddioctrl,
554                 POWER_VDDIOCTRL_DISABLE_FET);
555
556         setbits_le32(&power_regs->hw_power_5vctrl,
557                 POWER_5VCTRL_PWD_CHARGE_4P2_MASK);
558
559         setbits_le32(&power_regs->hw_power_5vctrl,
560                 POWER_5VCTRL_ENABLE_DCDC);
561
562         clrsetbits_le32(&power_regs->hw_power_5vctrl,
563                 POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
564                 0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
565 }
566
567 void mx28_handle_5v_conflict(void)
568 {
569         struct mx28_power_regs *power_regs =
570                 (struct mx28_power_regs *)MXS_POWER_BASE;
571         uint32_t tmp;
572
573         setbits_le32(&power_regs->hw_power_vddioctrl,
574                         POWER_VDDIOCTRL_BO_OFFSET_MASK);
575
576         for (;;) {
577                 tmp = readl(&power_regs->hw_power_sts);
578
579                 if (tmp & POWER_STS_VDDIO_BO) {
580                         mx28_powerdown();
581                         break;
582                 }
583
584                 if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
585                         mx28_boot_valid_5v();
586                         break;
587                 } else {
588                         mx28_powerdown();
589                         break;
590                 }
591
592                 if (tmp & POWER_STS_PSWITCH_MASK) {
593                         mx28_batt_boot();
594                         break;
595                 }
596         }
597 }
598
599 void mx28_5v_boot(void)
600 {
601         struct mx28_power_regs *power_regs =
602                 (struct mx28_power_regs *)MXS_POWER_BASE;
603
604         /*
605          * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
606          * but their implementation always returns 1 so we omit it here.
607          */
608         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
609                 mx28_boot_valid_5v();
610                 return;
611         }
612
613         early_delay(1000);
614         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
615                 mx28_boot_valid_5v();
616                 return;
617         }
618
619         mx28_handle_5v_conflict();
620 }
621
622 void mx28_init_batt_bo(void)
623 {
624         struct mx28_power_regs *power_regs =
625                 (struct mx28_power_regs *)MXS_POWER_BASE;
626
627         /* Brownout at 3V */
628         clrsetbits_le32(&power_regs->hw_power_battmonitor,
629                 POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
630                 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
631
632         writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
633         writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
634 }
635
636 void mx28_switch_vddd_to_dcdc_source(void)
637 {
638         struct mx28_power_regs *power_regs =
639                 (struct mx28_power_regs *)MXS_POWER_BASE;
640
641         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
642                 POWER_VDDDCTRL_LINREG_OFFSET_MASK,
643                 POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
644
645         clrbits_le32(&power_regs->hw_power_vdddctrl,
646                 POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
647                 POWER_VDDDCTRL_DISABLE_STEPPING);
648 }
649
650 void mx28_power_configure_power_source(void)
651 {
652         int batt_ready, batt_good;
653         struct mx28_power_regs *power_regs =
654                 (struct mx28_power_regs *)MXS_POWER_BASE;
655         struct mx28_lradc_regs *lradc_regs =
656                 (struct mx28_lradc_regs *)MXS_LRADC_BASE;
657
658         mx28_src_power_init();
659
660         batt_ready = mx28_is_batt_ready();
661
662         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
663                 batt_good = mx28_is_batt_good();
664                 if (batt_ready) {
665                         /* 5V source detected, good battery detected. */
666                         mx28_batt_boot();
667                 } else {
668                         if (batt_good) {
669                                 /* 5V source detected, low battery detceted. */
670                         } else {
671                                 /* 5V source detected, bad battery detected. */
672                                 writel(LRADC_CONVERSION_AUTOMATIC,
673                                         &lradc_regs->hw_lradc_conversion_clr);
674                                 clrbits_le32(&power_regs->hw_power_battmonitor,
675                                         POWER_BATTMONITOR_BATT_VAL_MASK);
676                         }
677                         mx28_5v_boot();
678                 }
679         } else {
680                 /* 5V not detected, booting from battery. */
681                 mx28_batt_boot();
682         }
683
684         mx28_power_clock2pll();
685
686         mx28_init_batt_bo();
687
688         mx28_switch_vddd_to_dcdc_source();
689 }
690
691 void mx28_enable_output_rail_protection(void)
692 {
693         struct mx28_power_regs *power_regs =
694                 (struct mx28_power_regs *)MXS_POWER_BASE;
695
696         writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
697                 POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
698
699         setbits_le32(&power_regs->hw_power_vdddctrl,
700                         POWER_VDDDCTRL_PWDN_BRNOUT);
701
702         setbits_le32(&power_regs->hw_power_vddactrl,
703                         POWER_VDDACTRL_PWDN_BRNOUT);
704
705         setbits_le32(&power_regs->hw_power_vddioctrl,
706                         POWER_VDDIOCTRL_PWDN_BRNOUT);
707 }
708
709 int mx28_get_vddio_power_source_off(void)
710 {
711         struct mx28_power_regs *power_regs =
712                 (struct mx28_power_regs *)MXS_POWER_BASE;
713         uint32_t tmp;
714
715         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
716                 tmp = readl(&power_regs->hw_power_vddioctrl);
717                 if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
718                         if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
719                                 POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
720                                 return 1;
721                         }
722                 }
723
724                 if (!(readl(&power_regs->hw_power_5vctrl) &
725                         POWER_5VCTRL_ENABLE_DCDC)) {
726                         if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
727                                 POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
728                                 return 1;
729                         }
730                 }
731         }
732
733         return 0;
734
735 }
736
737 int mx28_get_vddd_power_source_off(void)
738 {
739         struct mx28_power_regs *power_regs =
740                 (struct mx28_power_regs *)MXS_POWER_BASE;
741         uint32_t tmp;
742
743         tmp = readl(&power_regs->hw_power_vdddctrl);
744         if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
745                 if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
746                         POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
747                         return 1;
748                 }
749         }
750
751         if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
752                 if (!(readl(&power_regs->hw_power_5vctrl) &
753                         POWER_5VCTRL_ENABLE_DCDC)) {
754                         return 1;
755                 }
756         }
757
758         if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
759                 if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
760                         POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
761                         return 1;
762                 }
763         }
764
765         return 0;
766 }
767
768 void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout)
769 {
770         struct mx28_power_regs *power_regs =
771                 (struct mx28_power_regs *)MXS_POWER_BASE;
772         uint32_t cur_target, diff, bo_int = 0;
773         uint32_t powered_by_linreg = 0;
774
775         new_brownout = new_target - new_brownout;
776
777         cur_target = readl(&power_regs->hw_power_vddioctrl);
778         cur_target &= POWER_VDDIOCTRL_TRG_MASK;
779         cur_target *= 50;       /* 50 mV step*/
780         cur_target += 2800;     /* 2800 mV lowest */
781
782         powered_by_linreg = mx28_get_vddio_power_source_off();
783         if (new_target > cur_target) {
784
785                 if (powered_by_linreg) {
786                         bo_int = readl(&power_regs->hw_power_vddioctrl);
787                         clrbits_le32(&power_regs->hw_power_vddioctrl,
788                                         POWER_CTRL_ENIRQ_VDDIO_BO);
789                 }
790
791                 setbits_le32(&power_regs->hw_power_vddioctrl,
792                                 POWER_VDDIOCTRL_BO_OFFSET_MASK);
793                 do {
794                         if (new_target - cur_target > 100)
795                                 diff = cur_target + 100;
796                         else
797                                 diff = new_target;
798
799                         diff -= 2800;
800                         diff /= 50;
801
802                         clrsetbits_le32(&power_regs->hw_power_vddioctrl,
803                                 POWER_VDDIOCTRL_TRG_MASK, diff);
804
805                         if (powered_by_linreg ||
806                                 (readl(&power_regs->hw_power_sts) &
807                                         POWER_STS_VDD5V_GT_VDDIO))
808                                 early_delay(500);
809                         else {
810                                 while (!(readl(&power_regs->hw_power_sts) &
811                                         POWER_STS_DC_OK))
812                                         ;
813
814                         }
815
816                         cur_target = readl(&power_regs->hw_power_vddioctrl);
817                         cur_target &= POWER_VDDIOCTRL_TRG_MASK;
818                         cur_target *= 50;       /* 50 mV step*/
819                         cur_target += 2800;     /* 2800 mV lowest */
820                 } while (new_target > cur_target);
821
822                 if (powered_by_linreg) {
823                         writel(POWER_CTRL_VDDIO_BO_IRQ,
824                                 &power_regs->hw_power_ctrl_clr);
825                         if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO)
826                                 setbits_le32(&power_regs->hw_power_vddioctrl,
827                                                 POWER_CTRL_ENIRQ_VDDIO_BO);
828                 }
829         } else {
830                 do {
831                         if (cur_target - new_target > 100)
832                                 diff = cur_target - 100;
833                         else
834                                 diff = new_target;
835
836                         diff -= 2800;
837                         diff /= 50;
838
839                         clrsetbits_le32(&power_regs->hw_power_vddioctrl,
840                                 POWER_VDDIOCTRL_TRG_MASK, diff);
841
842                         if (powered_by_linreg ||
843                                 (readl(&power_regs->hw_power_sts) &
844                                         POWER_STS_VDD5V_GT_VDDIO))
845                                 early_delay(500);
846                         else {
847                                 while (!(readl(&power_regs->hw_power_sts) &
848                                         POWER_STS_DC_OK))
849                                         ;
850
851                         }
852
853                         cur_target = readl(&power_regs->hw_power_vddioctrl);
854                         cur_target &= POWER_VDDIOCTRL_TRG_MASK;
855                         cur_target *= 50;       /* 50 mV step*/
856                         cur_target += 2800;     /* 2800 mV lowest */
857                 } while (new_target < cur_target);
858         }
859
860         clrsetbits_le32(&power_regs->hw_power_vddioctrl,
861                         POWER_VDDDCTRL_BO_OFFSET_MASK,
862                         new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
863 }
864
865 void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout)
866 {
867         struct mx28_power_regs *power_regs =
868                 (struct mx28_power_regs *)MXS_POWER_BASE;
869         uint32_t cur_target, diff, bo_int = 0;
870         uint32_t powered_by_linreg = 0;
871
872         new_brownout = new_target - new_brownout;
873
874         cur_target = readl(&power_regs->hw_power_vdddctrl);
875         cur_target &= POWER_VDDDCTRL_TRG_MASK;
876         cur_target *= 25;       /* 25 mV step*/
877         cur_target += 800;      /* 800 mV lowest */
878
879         powered_by_linreg = mx28_get_vddd_power_source_off();
880         if (new_target > cur_target) {
881                 if (powered_by_linreg) {
882                         bo_int = readl(&power_regs->hw_power_vdddctrl);
883                         clrbits_le32(&power_regs->hw_power_vdddctrl,
884                                         POWER_CTRL_ENIRQ_VDDD_BO);
885                 }
886
887                 setbits_le32(&power_regs->hw_power_vdddctrl,
888                                 POWER_VDDDCTRL_BO_OFFSET_MASK);
889
890                 do {
891                         if (new_target - cur_target > 100)
892                                 diff = cur_target + 100;
893                         else
894                                 diff = new_target;
895
896                         diff -= 800;
897                         diff /= 25;
898
899                         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
900                                 POWER_VDDDCTRL_TRG_MASK, diff);
901
902                         if (powered_by_linreg ||
903                                 (readl(&power_regs->hw_power_sts) &
904                                         POWER_STS_VDD5V_GT_VDDIO))
905                                 early_delay(500);
906                         else {
907                                 while (!(readl(&power_regs->hw_power_sts) &
908                                         POWER_STS_DC_OK))
909                                         ;
910
911                         }
912
913                         cur_target = readl(&power_regs->hw_power_vdddctrl);
914                         cur_target &= POWER_VDDDCTRL_TRG_MASK;
915                         cur_target *= 25;       /* 25 mV step*/
916                         cur_target += 800;      /* 800 mV lowest */
917                 } while (new_target > cur_target);
918
919                 if (powered_by_linreg) {
920                         writel(POWER_CTRL_VDDD_BO_IRQ,
921                                 &power_regs->hw_power_ctrl_clr);
922                         if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO)
923                                 setbits_le32(&power_regs->hw_power_vdddctrl,
924                                                 POWER_CTRL_ENIRQ_VDDD_BO);
925                 }
926         } else {
927                 do {
928                         if (cur_target - new_target > 100)
929                                 diff = cur_target - 100;
930                         else
931                                 diff = new_target;
932
933                         diff -= 800;
934                         diff /= 25;
935
936                         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
937                                         POWER_VDDDCTRL_TRG_MASK, diff);
938
939                         if (powered_by_linreg ||
940                                 (readl(&power_regs->hw_power_sts) &
941                                         POWER_STS_VDD5V_GT_VDDIO))
942                                 early_delay(500);
943                         else {
944                                 while (!(readl(&power_regs->hw_power_sts) &
945                                         POWER_STS_DC_OK))
946                                         ;
947
948                         }
949
950                         cur_target = readl(&power_regs->hw_power_vdddctrl);
951                         cur_target &= POWER_VDDDCTRL_TRG_MASK;
952                         cur_target *= 25;       /* 25 mV step*/
953                         cur_target += 800;      /* 800 mV lowest */
954                 } while (new_target < cur_target);
955         }
956
957         clrsetbits_le32(&power_regs->hw_power_vdddctrl,
958                         POWER_VDDDCTRL_BO_OFFSET_MASK,
959                         new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
960 }
961
962 void mx28_setup_batt_detect(void)
963 {
964         mx28_lradc_init();
965         mx28_lradc_enable_batt_measurement();
966         early_delay(10);
967 }
968
969 void mx28_power_init(void)
970 {
971         struct mx28_power_regs *power_regs =
972                 (struct mx28_power_regs *)MXS_POWER_BASE;
973
974         mx28_power_clock2xtal();
975         mx28_power_clear_auto_restart();
976         mx28_power_set_linreg();
977         mx28_power_setup_5v_detect();
978
979         mx28_setup_batt_detect();
980
981         mx28_power_configure_power_source();
982         mx28_enable_output_rail_protection();
983
984         mx28_power_set_vddio(3300, 3150);
985
986         mx28_power_set_vddd(1350, 1200);
987
988         writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
989                 POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
990                 POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
991                 POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
992
993         writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
994
995         early_delay(1000);
996 }
997
998 #ifdef  CONFIG_SPL_MX28_PSWITCH_WAIT
999 void mx28_power_wait_pswitch(void)
1000 {
1001         struct mx28_power_regs *power_regs =
1002                 (struct mx28_power_regs *)MXS_POWER_BASE;
1003
1004         while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
1005                 ;
1006 }
1007 #endif