4 * Common bootmode functions for omap based boards
6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
16 * GNU General Public License for more details.
21 #include <asm/omap_common.h>
22 #include <asm/arch/omap.h>
23 #include <asm/arch/mmc_host_def.h>
24 #include <asm/arch/sys_proto.h>
26 DECLARE_GLOBAL_DATA_PTR;
28 void save_omap_boot_params(void)
30 u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS);
32 u32 dev_desc, dev_data;
34 if ((rom_params < NON_SECURE_SRAM_START) ||
35 (rom_params > NON_SECURE_SRAM_END))
39 * rom_params can be type casted to omap_boot_parameters and
40 * used. But it not correct to assume that romcode structure
41 * encoding would be same as u-boot. So use the defined offsets.
43 gd->arch.omap_boot_params.omap_bootdevice = boot_device =
44 *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
46 gd->arch.omap_boot_params.ch_flags =
47 *((u8 *)(rom_params + CH_FLAGS_OFFSET));
49 if ((boot_device >= MMC_BOOT_DEVICES_START) &&
50 (boot_device <= MMC_BOOT_DEVICES_END)) {
51 #if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX)
52 if ((omap_hw_init_context() ==
53 OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) {
54 gd->arch.omap_boot_params.omap_bootmode =
55 *((u8 *)(rom_params + BOOT_MODE_OFFSET));
59 dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET));
60 dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET));
61 gd->arch.omap_boot_params.omap_bootmode =
62 *((u32 *)(dev_data + BOOT_MODE_OFFSET));
67 #ifdef CONFIG_SPL_BUILD
68 u32 spl_boot_device(void)
70 return (u32) (gd->arch.omap_boot_params.omap_bootdevice);
73 u32 spl_boot_mode(void)
75 return gd->arch.omap_boot_params.omap_bootmode;
78 void spl_board_init(void)
80 #ifdef CONFIG_SPL_NAND_SUPPORT
83 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
88 int board_mmc_init(bd_t *bis)
90 switch (spl_boot_device()) {
91 case BOOT_DEVICE_MMC1:
92 omap_mmc_init(0, 0, 0, -1, -1);
94 case BOOT_DEVICE_MMC2:
95 case BOOT_DEVICE_MMC2_2:
96 omap_mmc_init(1, 0, 0, -1, -1);
102 void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
104 typedef void __noreturn (*image_entry_noargs_t)(u32 *);
105 image_entry_noargs_t image_entry =
106 (image_entry_noargs_t) spl_image->entry_point;
108 debug("image entry point: 0x%X\n", spl_image->entry_point);
109 /* Pass the saved boot_params from rom code */
110 image_entry((u32 *)&gd->arch.omap_boot_params);