git.sur5r.net Git - u-boot/blob - arch/arm/cpu/armv7/socfpga/clock_manager.c

   1 /*
   2  *  Copyright (C) 2013 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <asm/io.h>
   9 #include <asm/arch/clock_manager.h>
  10
  11 static const struct socfpga_clock_manager *clock_manager_base =
  12                 (void *)SOCFPGA_CLKMGR_ADDRESS;
  13
  14 #define CLKMGR_BYPASS_ENABLE    1
  15 #define CLKMGR_BYPASS_DISABLE   0
  16 #define CLKMGR_STAT_IDLE        0
  17 #define CLKMGR_STAT_BUSY        1
  18 #define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1            0
  19 #define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX        1
  20 #define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1            0
  21 #define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX        1
  22
  23 #define CLEAR_BGP_EN_PWRDN \
  24         (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
  25         CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \
  26         CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
  27
  28 #define VCO_EN_BASE \
  29         (CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
  30         CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \
  31         CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
  32
  33 static inline void cm_wait_for_lock(uint32_t mask)
  34 {
  35         register uint32_t inter_val;
  36         do {
  37                 inter_val = readl(&clock_manager_base->inter) & mask;
  38         } while (inter_val != mask);
  39 }
  40
  41 /* function to poll in the fsm busy bit */
  42 static inline void cm_wait_for_fsm(void)
  43 {
  44         while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
  45                 ;
  46 }
  47
  48 /*
  49  * function to write the bypass register which requires a poll of the
  50  * busy bit
  51  */
  52 static inline void cm_write_bypass(uint32_t val)
  53 {
  54         writel(val, &clock_manager_base->bypass);
  55         cm_wait_for_fsm();
  56 }
  57
  58 /* function to write the ctrl register which requires a poll of the busy bit */
  59 static inline void cm_write_ctrl(uint32_t val)
  60 {
  61         writel(val, &clock_manager_base->ctrl);
  62         cm_wait_for_fsm();
  63 }
  64
  65 /* function to write a clock register that has phase information */
  66 static inline void cm_write_with_phase(uint32_t value,
  67         uint32_t reg_address, uint32_t mask)
  68 {
  69         /* poll until phase is zero */
  70         while (readl(reg_address) & mask)
  71                 ;
  72
  73         writel(value, reg_address);
  74
  75         while (readl(reg_address) & mask)
  76                 ;
  77 }
  78
  79 /*
  80  * Setup clocks while making no assumptions about previous state of the clocks.
  81  *
  82  * Start by being paranoid and gate all sw managed clocks
  83  * Put all plls in bypass
  84  * Put all plls VCO registers back to reset value (bandgap power down).
  85  * Put peripheral and main pll src to reset value to avoid glitch.
  86  * Delay 5 us.
  87  * Deassert bandgap power down and set numerator and denominator
  88  * Start 7 us timer.
  89  * set internal dividers
  90  * Wait for 7 us timer.
  91  * Enable plls
  92  * Set external dividers while plls are locking
  93  * Wait for pll lock
  94  * Assert/deassert outreset all.
  95  * Take all pll's out of bypass
  96  * Clear safe mode
  97  * set source main and peripheral clocks
  98  * Ungate clocks
  99  */
 100
 101 void cm_basic_init(const cm_config_t *cfg)
 102 {
 103         uint32_t start, timeout;
 104
 105         /* Start by being paranoid and gate all sw managed clocks */
 106
 107         /*
 108          * We need to disable nandclk
 109          * and then do another apb access before disabling
 110          * gatting off the rest of the periperal clocks.
 111          */
 112         writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
 113                 readl(&clock_manager_base->per_pll.en),
 114                 &clock_manager_base->per_pll.en);
 115
 116         /* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
 117         writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
 118                 CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
 119                 CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
 120                 CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
 121                 CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
 122                 CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
 123                 &clock_manager_base->main_pll.en);
 124
 125         writel(0, &clock_manager_base->sdr_pll.en);
 126
 127         /* now we can gate off the rest of the peripheral clocks */
 128         writel(0, &clock_manager_base->per_pll.en);
 129
 130         /* Put all plls in bypass */
 131         cm_write_bypass(
 132                 CLKMGR_BYPASS_PERPLLSRC_SET(
 133                 CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
 134                 CLKMGR_BYPASS_SDRPLLSRC_SET(
 135                 CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
 136                 CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) |
 137                 CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) |
 138                 CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE));
 139
 140         /*
 141          * Put all plls VCO registers back to reset value.
 142          * Some code might have messed with them.
 143          */
 144         writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE,
 145                &clock_manager_base->main_pll.vco);
 146         writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE,
 147                &clock_manager_base->per_pll.vco);
 148         writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE,
 149                &clock_manager_base->sdr_pll.vco);
 150
 151         /*
 152          * The clocks to the flash devices and the L4_MAIN clocks can
 153          * glitch when coming out of safe mode if their source values
 154          * are different from their reset value.  So the trick it to
 155          * put them back to their reset state, and change input
 156          * after exiting safe mode but before ungating the clocks.
 157          */
 158         writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
 159                &clock_manager_base->per_pll.src);
 160         writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
 161                &clock_manager_base->main_pll.l4src);
 162
 163         /* read back for the required 5 us delay. */
 164         readl(&clock_manager_base->main_pll.vco);
 165         readl(&clock_manager_base->per_pll.vco);
 166         readl(&clock_manager_base->sdr_pll.vco);
 167
 168
 169         /*
 170          * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
 171          * with numerator and denominator.
 172          */
 173         writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN |
 174                 CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
 175                 &clock_manager_base->main_pll.vco);
 176
 177         writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN |
 178                 CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
 179                 &clock_manager_base->per_pll.vco);
 180
 181         writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
 182                 CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
 183                 cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN |
 184                 CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
 185                 &clock_manager_base->sdr_pll.vco);
 186
 187         /*
 188          * Time starts here
 189          * must wait 7 us from BGPWRDN_SET(0) to VCO_ENABLE_SET(1)
 190          */
 191         start = get_timer(0);
 192         /* timeout in unit of us as CONFIG_SYS_HZ = 1000*1000 */
 193         timeout = 7;
 194
 195         /* main mpu */
 196         writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
 197
 198         /* main main clock */
 199         writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
 200
 201         /* main for dbg */
 202         writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
 203
 204         /* main for cfgs2fuser0clk */
 205         writel(cfg->cfg2fuser0clk,
 206                &clock_manager_base->main_pll.cfgs2fuser0clk);
 207
 208         /* Peri emac0 50 MHz default to RMII */
 209         writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
 210
 211         /* Peri emac1 50 MHz default to RMII */
 212         writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
 213
 214         /* Peri QSPI */
 215         writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
 216
 217         writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
 218
 219         /* Peri pernandsdmmcclk */
 220         writel(cfg->pernandsdmmcclk,
 221                &clock_manager_base->per_pll.pernandsdmmcclk);
 222
 223         /* Peri perbaseclk */
 224         writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
 225
 226         /* Peri s2fuser1clk */
 227         writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
 228
 229         /* 7 us must have elapsed before we can enable the VCO */
 230         while (get_timer(start) < timeout)
 231                 ;
 232
 233         /* Enable vco */
 234         /* main pll vco */
 235         writel(cfg->main_vco_base | VCO_EN_BASE,
 236                &clock_manager_base->main_pll.vco);
 237
 238         /* periferal pll */
 239         writel(cfg->peri_vco_base | VCO_EN_BASE,
 240                &clock_manager_base->per_pll.vco);
 241
 242         /* sdram pll vco */
 243         writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
 244                 CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
 245                 cfg->sdram_vco_base | VCO_EN_BASE,
 246                 &clock_manager_base->sdr_pll.vco);
 247
 248         /* L3 MP and L3 SP */
 249         writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
 250
 251         writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
 252
 253         writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
 254
 255         /* L4 MP, L4 SP, can0, and can1 */
 256         writel(cfg->perdiv, &clock_manager_base->per_pll.div);
 257
 258         writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
 259
 260 #define LOCKED_MASK \
 261         (CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
 262         CLKMGR_INTER_PERPLLLOCKED_MASK  | \
 263         CLKMGR_INTER_MAINPLLLOCKED_MASK)
 264
 265         cm_wait_for_lock(LOCKED_MASK);
 266
 267         /* write the sdram clock counters before toggling outreset all */
 268         writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
 269                &clock_manager_base->sdr_pll.ddrdqsclk);
 270
 271         writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
 272                &clock_manager_base->sdr_pll.ddr2xdqsclk);
 273
 274         writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
 275                &clock_manager_base->sdr_pll.ddrdqclk);
 276
 277         writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
 278                &clock_manager_base->sdr_pll.s2fuser2clk);
 279
 280         /*
 281          * after locking, but before taking out of bypass
 282          * assert/deassert outresetall
 283          */
 284         uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
 285
 286         /* assert main outresetall */
 287         writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
 288                &clock_manager_base->main_pll.vco);
 289
 290         uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
 291
 292         /* assert pheriph outresetall */
 293         writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
 294                &clock_manager_base->per_pll.vco);
 295
 296         /* assert sdram outresetall */
 297         writel(cfg->sdram_vco_base | VCO_EN_BASE|
 298                 CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1),
 299                 &clock_manager_base->sdr_pll.vco);
 300
 301         /* deassert main outresetall */
 302         writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
 303                &clock_manager_base->main_pll.vco);
 304
 305         /* deassert pheriph outresetall */
 306         writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
 307                &clock_manager_base->per_pll.vco);
 308
 309         /* deassert sdram outresetall */
 310         writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
 311                 cfg->sdram_vco_base | VCO_EN_BASE,
 312                 &clock_manager_base->sdr_pll.vco);
 313
 314         /*
 315          * now that we've toggled outreset all, all the clocks
 316          * are aligned nicely; so we can change any phase.
 317          */
 318         cm_write_with_phase(cfg->ddrdqsclk,
 319                             (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
 320                             CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
 321
 322         /* SDRAM DDR2XDQSCLK */
 323         cm_write_with_phase(cfg->ddr2xdqsclk,
 324                             (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
 325                             CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
 326
 327         cm_write_with_phase(cfg->ddrdqclk,
 328                             (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
 329                             CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
 330
 331         cm_write_with_phase(cfg->s2fuser2clk,
 332                             (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
 333                             CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
 334
 335         /* Take all three PLLs out of bypass when safe mode is cleared. */
 336         cm_write_bypass(
 337                 CLKMGR_BYPASS_PERPLLSRC_SET(
 338                         CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
 339                 CLKMGR_BYPASS_SDRPLLSRC_SET(
 340                         CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
 341                 CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) |
 342                 CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) |
 343                 CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE));
 344
 345         /* clear safe mode */
 346         cm_write_ctrl(readl(&clock_manager_base->ctrl) |
 347                         CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK));
 348
 349         /*
 350          * now that safe mode is clear with clocks gated
 351          * it safe to change the source mux for the flashes the the L4_MAIN
 352          */
 353         writel(cfg->persrc, &clock_manager_base->per_pll.src);
 354         writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
 355
 356         /* Now ungate non-hw-managed clocks */
 357         writel(~0, &clock_manager_base->main_pll.en);
 358         writel(~0, &clock_manager_base->per_pll.en);
 359         writel(~0, &clock_manager_base->sdr_pll.en);
 360 }