git.sur5r.net Git - u-boot/blob - arch/arm/cpu/armv8/fsl-layerscape/cpu.c

   1 /*
   2  * Copyright 2017 NXP
   3  * Copyright 2014-2015 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <fsl_ddr_sdram.h>
  10 #include <asm/io.h>
  11 #include <linux/errno.h>
  12 #include <asm/system.h>
  13 #include <asm/armv8/mmu.h>
  14 #include <asm/io.h>
  15 #include <asm/arch/fsl_serdes.h>
  16 #include <asm/arch/soc.h>
  17 #include <asm/arch/cpu.h>
  18 #include <asm/arch/speed.h>
  19 #include <fsl_immap.h>
  20 #include <asm/arch/mp.h>
  21 #include <efi_loader.h>
  22 #include <fm_eth.h>
  23 #include <fsl-mc/fsl_mc.h>
  24 #ifdef CONFIG_FSL_ESDHC
  25 #include <fsl_esdhc.h>
  26 #endif
  27 #include <asm/armv8/sec_firmware.h>
  28 #ifdef CONFIG_SYS_FSL_DDR
  29 #include <fsl_ddr.h>
  30 #endif
  31 #include <asm/arch/clock.h>
  32 #include <hwconfig.h>
  33
  34 DECLARE_GLOBAL_DATA_PTR;
  35
  36 struct mm_region *mem_map = early_map;
  37
  38 void cpu_name(char *name)
  39 {
  40         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
  41         unsigned int i, svr, ver;
  42
  43         svr = gur_in32(&gur->svr);
  44         ver = SVR_SOC_VER(svr);
  45
  46         for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
  47                 if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
  48                         strcpy(name, cpu_type_list[i].name);
  49
  50                         if (IS_E_PROCESSOR(svr))
  51                                 strcat(name, "E");
  52
  53                         sprintf(name + strlen(name), " Rev%d.%d",
  54                                 SVR_MAJ(svr), SVR_MIN(svr));
  55                         break;
  56                 }
  57
  58         if (i == ARRAY_SIZE(cpu_type_list))
  59                 strcpy(name, "unknown");
  60 }
  61
  62 #ifndef CONFIG_SYS_DCACHE_OFF
  63 /*
  64  * To start MMU before DDR is available, we create MMU table in SRAM.
  65  * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
  66  * levels of translation tables here to cover 40-bit address space.
  67  * We use 4KB granule size, with 40 bits physical address, T0SZ=24
  68  * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
  69  * Note, the debug print in cache_v8.c is not usable for debugging
  70  * these early MMU tables because UART is not yet available.
  71  */
  72 static inline void early_mmu_setup(void)
  73 {
  74         unsigned int el = current_el();
  75
  76         /* global data is already setup, no allocation yet */
  77         gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
  78         gd->arch.tlb_fillptr = gd->arch.tlb_addr;
  79         gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
  80
  81         /* Create early page tables */
  82         setup_pgtables();
  83
  84         /* point TTBR to the new table */
  85         set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
  86                           get_tcr(el, NULL, NULL) &
  87                           ~(TCR_ORGN_MASK | TCR_IRGN_MASK),
  88                           MEMORY_ATTRIBUTES);
  89
  90         set_sctlr(get_sctlr() | CR_M);
  91 }
  92
  93 static void fix_pcie_mmu_map(void)
  94 {
  95 #ifdef CONFIG_ARCH_LS2080A
  96         unsigned int i;
  97         u32 svr, ver;
  98         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
  99
 100         svr = gur_in32(&gur->svr);
 101         ver = SVR_SOC_VER(svr);
 102
 103         /* Fix PCIE base and size for LS2088A */
 104         if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
 105             (ver == SVR_LS2048A) || (ver == SVR_LS2044A) ||
 106             (ver == SVR_LS2081A) || (ver == SVR_LS2041A)) {
 107                 for (i = 0; i < ARRAY_SIZE(final_map); i++) {
 108                         switch (final_map[i].phys) {
 109                         case CONFIG_SYS_PCIE1_PHYS_ADDR:
 110                                 final_map[i].phys = 0x2000000000ULL;
 111                                 final_map[i].virt = 0x2000000000ULL;
 112                                 final_map[i].size = 0x800000000ULL;
 113                                 break;
 114                         case CONFIG_SYS_PCIE2_PHYS_ADDR:
 115                                 final_map[i].phys = 0x2800000000ULL;
 116                                 final_map[i].virt = 0x2800000000ULL;
 117                                 final_map[i].size = 0x800000000ULL;
 118                                 break;
 119                         case CONFIG_SYS_PCIE3_PHYS_ADDR:
 120                                 final_map[i].phys = 0x3000000000ULL;
 121                                 final_map[i].virt = 0x3000000000ULL;
 122                                 final_map[i].size = 0x800000000ULL;
 123                                 break;
 124                         case CONFIG_SYS_PCIE4_PHYS_ADDR:
 125                                 final_map[i].phys = 0x3800000000ULL;
 126                                 final_map[i].virt = 0x3800000000ULL;
 127                                 final_map[i].size = 0x800000000ULL;
 128                                 break;
 129                         default:
 130                                 break;
 131                         }
 132                 }
 133         }
 134 #endif
 135 }
 136
 137 /*
 138  * The final tables look similar to early tables, but different in detail.
 139  * These tables are in DRAM. Sub tables are added to enable cache for
 140  * QBMan and OCRAM.
 141  *
 142  * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
 143  * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
 144  */
 145 static inline void final_mmu_setup(void)
 146 {
 147         u64 tlb_addr_save = gd->arch.tlb_addr;
 148         unsigned int el = current_el();
 149         int index;
 150
 151         /* fix the final_map before filling in the block entries */
 152         fix_pcie_mmu_map();
 153
 154         mem_map = final_map;
 155
 156         /* Update mapping for DDR to actual size */
 157         for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
 158                 /*
 159                  * Find the entry for DDR mapping and update the address and
 160                  * size. Zero-sized mapping will be skipped when creating MMU
 161                  * table.
 162                  */
 163                 switch (final_map[index].virt) {
 164                 case CONFIG_SYS_FSL_DRAM_BASE1:
 165                         final_map[index].virt = gd->bd->bi_dram[0].start;
 166                         final_map[index].phys = gd->bd->bi_dram[0].start;
 167                         final_map[index].size = gd->bd->bi_dram[0].size;
 168                         break;
 169 #ifdef CONFIG_SYS_FSL_DRAM_BASE2
 170                 case CONFIG_SYS_FSL_DRAM_BASE2:
 171 #if (CONFIG_NR_DRAM_BANKS >= 2)
 172                         final_map[index].virt = gd->bd->bi_dram[1].start;
 173                         final_map[index].phys = gd->bd->bi_dram[1].start;
 174                         final_map[index].size = gd->bd->bi_dram[1].size;
 175 #else
 176                         final_map[index].size = 0;
 177 #endif
 178                 break;
 179 #endif
 180 #ifdef CONFIG_SYS_FSL_DRAM_BASE3
 181                 case CONFIG_SYS_FSL_DRAM_BASE3:
 182 #if (CONFIG_NR_DRAM_BANKS >= 3)
 183                         final_map[index].virt = gd->bd->bi_dram[2].start;
 184                         final_map[index].phys = gd->bd->bi_dram[2].start;
 185                         final_map[index].size = gd->bd->bi_dram[2].size;
 186 #else
 187                         final_map[index].size = 0;
 188 #endif
 189                 break;
 190 #endif
 191                 default:
 192                         break;
 193                 }
 194         }
 195
 196 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 197         if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 198                 if (el == 3) {
 199                         /*
 200                          * Only use gd->arch.secure_ram if the address is
 201                          * recalculated. Align to 4KB for MMU table.
 202                          */
 203                         /* put page tables in secure ram */
 204                         index = ARRAY_SIZE(final_map) - 2;
 205                         gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
 206                         final_map[index].virt = gd->arch.secure_ram & ~0x3;
 207                         final_map[index].phys = final_map[index].virt;
 208                         final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
 209                         final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
 210                         gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
 211                         tlb_addr_save = gd->arch.tlb_addr;
 212                 } else {
 213                         /* Use allocated (board_f.c) memory for TLB */
 214                         tlb_addr_save = gd->arch.tlb_allocated;
 215                         gd->arch.tlb_addr = tlb_addr_save;
 216                 }
 217         }
 218 #endif
 219
 220         /* Reset the fill ptr */
 221         gd->arch.tlb_fillptr = tlb_addr_save;
 222
 223         /* Create normal system page tables */
 224         setup_pgtables();
 225
 226         /* Create emergency page tables */
 227         gd->arch.tlb_addr = gd->arch.tlb_fillptr;
 228         gd->arch.tlb_emerg = gd->arch.tlb_addr;
 229         setup_pgtables();
 230         gd->arch.tlb_addr = tlb_addr_save;
 231
 232         /* Disable cache and MMU */
 233         dcache_disable();       /* TLBs are invalidated */
 234         invalidate_icache_all();
 235
 236         /* point TTBR to the new table */
 237         set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
 238                           MEMORY_ATTRIBUTES);
 239
 240         set_sctlr(get_sctlr() | CR_M);
 241 }
 242
 243 u64 get_page_table_size(void)
 244 {
 245         return 0x10000;
 246 }
 247
 248 int arch_cpu_init(void)
 249 {
 250         /*
 251          * This function is called before U-Boot relocates itself to speed up
 252          * on system running. It is not necessary to run if performance is not
 253          * critical. Skip if MMU is already enabled by SPL or other means.
 254          */
 255         if (get_sctlr() & CR_M)
 256                 return 0;
 257
 258         icache_enable();
 259         __asm_invalidate_dcache_all();
 260         __asm_invalidate_tlb_all();
 261         early_mmu_setup();
 262         set_sctlr(get_sctlr() | CR_C);
 263         return 0;
 264 }
 265
 266 void mmu_setup(void)
 267 {
 268         final_mmu_setup();
 269 }
 270
 271 /*
 272  * This function is called from common/board_r.c.
 273  * It recreates MMU table in main memory.
 274  */
 275 void enable_caches(void)
 276 {
 277         mmu_setup();
 278         __asm_invalidate_tlb_all();
 279         icache_enable();
 280         dcache_enable();
 281 }
 282 #endif
 283
 284 u32 initiator_type(u32 cluster, int init_id)
 285 {
 286         struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 287         u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
 288         u32 type = 0;
 289
 290         type = gur_in32(&gur->tp_ityp[idx]);
 291         if (type & TP_ITYP_AV)
 292                 return type;
 293
 294         return 0;
 295 }
 296
 297 u32 cpu_pos_mask(void)
 298 {
 299         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 300         int i = 0;
 301         u32 cluster, type, mask = 0;
 302
 303         do {
 304                 int j;
 305
 306                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 307                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 308                         type = initiator_type(cluster, j);
 309                         if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
 310                                 mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
 311                 }
 312                 i++;
 313         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 314
 315         return mask;
 316 }
 317
 318 u32 cpu_mask(void)
 319 {
 320         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 321         int i = 0, count = 0;
 322         u32 cluster, type, mask = 0;
 323
 324         do {
 325                 int j;
 326
 327                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 328                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 329                         type = initiator_type(cluster, j);
 330                         if (type) {
 331                                 if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
 332                                         mask |= 1 << count;
 333                                 count++;
 334                         }
 335                 }
 336                 i++;
 337         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 338
 339         return mask;
 340 }
 341
 342 /*
 343  * Return the number of cores on this SOC.
 344  */
 345 int cpu_numcores(void)
 346 {
 347         return hweight32(cpu_mask());
 348 }
 349
 350 int fsl_qoriq_core_to_cluster(unsigned int core)
 351 {
 352         struct ccsr_gur __iomem *gur =
 353                 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
 354         int i = 0, count = 0;
 355         u32 cluster;
 356
 357         do {
 358                 int j;
 359
 360                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 361                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 362                         if (initiator_type(cluster, j)) {
 363                                 if (count == core)
 364                                         return i;
 365                                 count++;
 366                         }
 367                 }
 368                 i++;
 369         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 370
 371         return -1;      /* cannot identify the cluster */
 372 }
 373
 374 u32 fsl_qoriq_core_to_type(unsigned int core)
 375 {
 376         struct ccsr_gur __iomem *gur =
 377                 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
 378         int i = 0, count = 0;
 379         u32 cluster, type;
 380
 381         do {
 382                 int j;
 383
 384                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 385                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 386                         type = initiator_type(cluster, j);
 387                         if (type) {
 388                                 if (count == core)
 389                                         return type;
 390                                 count++;
 391                         }
 392                 }
 393                 i++;
 394         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 395
 396         return -1;      /* cannot identify the cluster */
 397 }
 398
 399 #ifndef CONFIG_FSL_LSCH3
 400 uint get_svr(void)
 401 {
 402         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 403
 404         return gur_in32(&gur->svr);
 405 }
 406 #endif
 407
 408 #ifdef CONFIG_DISPLAY_CPUINFO
 409 int print_cpuinfo(void)
 410 {
 411         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 412         struct sys_info sysinfo;
 413         char buf[32];
 414         unsigned int i, core;
 415         u32 type, rcw, svr = gur_in32(&gur->svr);
 416
 417         puts("SoC: ");
 418
 419         cpu_name(buf);
 420         printf(" %s (0x%x)\n", buf, svr);
 421         memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
 422         get_sys_info(&sysinfo);
 423         puts("Clock Configuration:");
 424         for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
 425                 if (!(i % 3))
 426                         puts("\n       ");
 427                 type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
 428                 printf("CPU%d(%s):%-4s MHz  ", core,
 429                        type == TY_ITYP_VER_A7 ? "A7 " :
 430                        (type == TY_ITYP_VER_A53 ? "A53" :
 431                        (type == TY_ITYP_VER_A57 ? "A57" :
 432                        (type == TY_ITYP_VER_A72 ? "A72" : "   "))),
 433                        strmhz(buf, sysinfo.freq_processor[core]));
 434         }
 435         /* Display platform clock as Bus frequency. */
 436         printf("\n       Bus:      %-4s MHz  ",
 437                strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
 438         printf("DDR:      %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
 439 #ifdef CONFIG_SYS_DPAA_FMAN
 440         printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 441 #endif
 442 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 443         if (soc_has_dp_ddr()) {
 444                 printf("     DP-DDR:   %-4s MT/s",
 445                        strmhz(buf, sysinfo.freq_ddrbus2));
 446         }
 447 #endif
 448         puts("\n");
 449
 450         /*
 451          * Display the RCW, so that no one gets confused as to what RCW
 452          * we're actually using for this boot.
 453          */
 454         puts("Reset Configuration Word (RCW):");
 455         for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
 456                 rcw = gur_in32(&gur->rcwsr[i]);
 457                 if ((i % 4) == 0)
 458                         printf("\n       %08x:", i * 4);
 459                 printf(" %08x", rcw);
 460         }
 461         puts("\n");
 462
 463         return 0;
 464 }
 465 #endif
 466
 467 #ifdef CONFIG_FSL_ESDHC
 468 int cpu_mmc_init(bd_t *bis)
 469 {
 470         return fsl_esdhc_mmc_init(bis);
 471 }
 472 #endif
 473
 474 int cpu_eth_init(bd_t *bis)
 475 {
 476         int error = 0;
 477
 478 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 479         error = fsl_mc_ldpaa_init(bis);
 480 #endif
 481 #ifdef CONFIG_FMAN_ENET
 482         fm_standard_init(bis);
 483 #endif
 484         return error;
 485 }
 486
 487 static inline int check_psci(void)
 488 {
 489         unsigned int psci_ver;
 490
 491         psci_ver = sec_firmware_support_psci_version();
 492         if (psci_ver == PSCI_INVALID_VER)
 493                 return 1;
 494
 495         return 0;
 496 }
 497
 498 static void config_core_prefetch(void)
 499 {
 500         char *buf = NULL;
 501         char buffer[HWCONFIG_BUFFER_SIZE];
 502         const char *prefetch_arg = NULL;
 503         size_t arglen;
 504         unsigned int mask;
 505         struct pt_regs regs;
 506
 507         if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
 508                 buf = buffer;
 509
 510         prefetch_arg = hwconfig_subarg_f("core_prefetch", "disable",
 511                                          &arglen, buf);
 512
 513         if (prefetch_arg) {
 514                 mask = simple_strtoul(prefetch_arg, NULL, 0) & 0xff;
 515                 if (mask & 0x1) {
 516                         printf("Core0 prefetch can't be disabled\n");
 517                         return;
 518                 }
 519
 520 #define SIP_PREFETCH_DISABLE_64 0xC200FF13
 521                 regs.regs[0] = SIP_PREFETCH_DISABLE_64;
 522                 regs.regs[1] = mask;
 523                 smc_call(&regs);
 524
 525                 if (regs.regs[0])
 526                         printf("Prefetch disable config failed for mask ");
 527                 else
 528                         printf("Prefetch disable config passed for mask ");
 529                 printf("0x%x\n", mask);
 530         }
 531 }
 532
 533 int arch_early_init_r(void)
 534 {
 535 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 536         u32 svr_dev_id;
 537         /*
 538          * erratum A009635 is valid only for LS2080A SoC and
 539          * its personalitiesi
 540          */
 541         svr_dev_id = get_svr() >> 16;
 542         if (svr_dev_id == SVR_DEV_LS2080A)
 543                 erratum_a009635();
 544 #endif
 545 #if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
 546         erratum_a009942_check_cpo();
 547 #endif
 548         if (check_psci()) {
 549                 debug("PSCI: PSCI does not exist.\n");
 550
 551                 /* if PSCI does not exist, boot secondary cores here */
 552                 if (fsl_layerscape_wake_seconday_cores())
 553                         printf("Did not wake secondary cores\n");
 554         }
 555
 556 #ifdef CONFIG_SYS_FSL_HAS_RGMII
 557         fsl_rgmii_init();
 558 #endif
 559
 560         config_core_prefetch();
 561
 562 #ifdef CONFIG_SYS_HAS_SERDES
 563         fsl_serdes_init();
 564 #endif
 565 #ifdef CONFIG_FMAN_ENET
 566         fman_enet_init();
 567 #endif
 568         return 0;
 569 }
 570
 571 int timer_init(void)
 572 {
 573         u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
 574 #ifdef CONFIG_FSL_LSCH3
 575         u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 576 #endif
 577 #ifdef CONFIG_ARCH_LS2080A
 578         u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 579         u32 svr_dev_id;
 580 #endif
 581 #ifdef COUNTER_FREQUENCY_REAL
 582         unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
 583
 584         /* Update with accurate clock frequency */
 585         if (current_el() == 3)
 586                 asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
 587 #endif
 588
 589 #ifdef CONFIG_FSL_LSCH3
 590         /* Enable timebase for all clusters.
 591          * It is safe to do so even some clusters are not enabled.
 592          */
 593         out_le32(cltbenr, 0xf);
 594 #endif
 595
 596 #ifdef CONFIG_ARCH_LS2080A
 597         /*
 598          * In certain Layerscape SoCs, the clock for each core's
 599          * has an enable bit in the PMU Physical Core Time Base Enable
 600          * Register (PCTBENR), which allows the watchdog to operate.
 601          */
 602         setbits_le32(pctbenr, 0xff);
 603         /*
 604          * For LS2080A SoC and its personalities, timer controller
 605          * offset is different
 606          */
 607         svr_dev_id = get_svr() >> 16;
 608         if (svr_dev_id == SVR_DEV_LS2080A)
 609                 cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
 610
 611 #endif
 612
 613         /* Enable clock for timer
 614          * This is a global setting.
 615          */
 616         out_le32(cntcr, 0x1);
 617
 618         return 0;
 619 }
 620
 621 __efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
 622
 623 void __efi_runtime reset_cpu(ulong addr)
 624 {
 625         u32 val;
 626
 627         /* Raise RESET_REQ_B */
 628         val = scfg_in32(rstcr);
 629         val |= 0x02;
 630         scfg_out32(rstcr, val);
 631 }
 632
 633 #ifdef CONFIG_EFI_LOADER
 634
 635 void __efi_runtime EFIAPI efi_reset_system(
 636                        enum efi_reset_type reset_type,
 637                        efi_status_t reset_status,
 638                        unsigned long data_size, void *reset_data)
 639 {
 640         switch (reset_type) {
 641         case EFI_RESET_COLD:
 642         case EFI_RESET_WARM:
 643                 reset_cpu(0);
 644                 break;
 645         case EFI_RESET_SHUTDOWN:
 646                 /* Nothing we can do */
 647                 break;
 648         }
 649
 650         while (1) { }
 651 }
 652
 653 void efi_reset_system_init(void)
 654 {
 655        efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
 656 }
 657
 658 #endif
 659
 660 /*
 661  * Calculate reserved memory with given memory bank
 662  * Return aligned memory size on success
 663  * Return (ram_size + needed size) for failure
 664  */
 665 phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 666 {
 667         phys_size_t ram_top = ram_size;
 668
 669 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 670         ram_top = mc_get_dram_block_size();
 671         if (ram_top > ram_size)
 672                 return ram_size + ram_top;
 673
 674         ram_top = ram_size - ram_top;
 675         /* The start address of MC reserved memory needs to be aligned. */
 676         ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
 677 #endif
 678
 679         return ram_size - ram_top;
 680 }
 681
 682 phys_size_t get_effective_memsize(void)
 683 {
 684         phys_size_t ea_size, rem = 0;
 685
 686         /*
 687          * For ARMv8 SoCs, DDR memory is split into two or three regions. The
 688          * first region is 2GB space at 0x8000_0000. Secure memory needs to
 689          * allocated from first region. If the memory extends to  the second
 690          * region (or the third region if applicable), Management Complex (MC)
 691          * memory should be put into the highest region, i.e. the end of DDR
 692          * memory. CONFIG_MAX_MEM_MAPPED is set to the size of first region so
 693          * U-Boot doesn't relocate itself into higher address. Should DDR be
 694          * configured to skip the first region, this function needs to be
 695          * adjusted.
 696          */
 697         if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
 698                 ea_size = CONFIG_MAX_MEM_MAPPED;
 699                 rem = gd->ram_size - ea_size;
 700         } else {
 701                 ea_size = gd->ram_size;
 702         }
 703
 704 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 705         /* Check if we have enough space for secure memory */
 706         if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE)
 707                 ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 708         else
 709                 printf("Error: No enough space for secure memory.\n");
 710 #endif
 711         /* Check if we have enough memory for MC */
 712         if (rem < board_reserve_ram_top(rem)) {
 713                 /* Not enough memory in high region to reserve */
 714                 if (ea_size > board_reserve_ram_top(ea_size))
 715                         ea_size -= board_reserve_ram_top(ea_size);
 716                 else
 717                         printf("Error: No enough space for reserved memory.\n");
 718         }
 719
 720         return ea_size;
 721 }
 722
 723 int dram_init_banksize(void)
 724 {
 725 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 726         phys_size_t dp_ddr_size;
 727 #endif
 728
 729         /*
 730          * gd->ram_size has the total size of DDR memory, less reserved secure
 731          * memory. The DDR extends from low region to high region(s) presuming
 732          * no hole is created with DDR configuration. gd->arch.secure_ram tracks
 733          * the location of secure memory. gd->arch.resv_ram tracks the location
 734          * of reserved memory for Management Complex (MC). Because gd->ram_size
 735          * is reduced by this function if secure memory is reserved, checking
 736          * gd->arch.secure_ram should be done to avoid running it repeatedly.
 737          */
 738
 739 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 740         if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 741                 debug("No need to run again, skip %s\n", __func__);
 742
 743                 return 0;
 744         }
 745 #endif
 746
 747         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 748         if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
 749                 gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
 750                 gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
 751                 gd->bd->bi_dram[1].size = gd->ram_size -
 752                                           CONFIG_SYS_DDR_BLOCK1_SIZE;
 753 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 754                 if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
 755                         gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
 756                         gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
 757                                                   CONFIG_SYS_DDR_BLOCK2_SIZE;
 758                         gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
 759                 }
 760 #endif
 761         } else {
 762                 gd->bd->bi_dram[0].size = gd->ram_size;
 763         }
 764 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 765         if (gd->bd->bi_dram[0].size >
 766                                 CONFIG_SYS_MEM_RESERVE_SECURE) {
 767                 gd->bd->bi_dram[0].size -=
 768                                 CONFIG_SYS_MEM_RESERVE_SECURE;
 769                 gd->arch.secure_ram = gd->bd->bi_dram[0].start +
 770                                       gd->bd->bi_dram[0].size;
 771                 gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 772                 gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 773         }
 774 #endif  /* CONFIG_SYS_MEM_RESERVE_SECURE */
 775
 776 #if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
 777         /* Assign memory for MC */
 778 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 779         if (gd->bd->bi_dram[2].size >=
 780             board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
 781                 gd->arch.resv_ram = gd->bd->bi_dram[2].start +
 782                             gd->bd->bi_dram[2].size -
 783                             board_reserve_ram_top(gd->bd->bi_dram[2].size);
 784         } else
 785 #endif
 786         {
 787                 if (gd->bd->bi_dram[1].size >=
 788                     board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
 789                         gd->arch.resv_ram = gd->bd->bi_dram[1].start +
 790                                 gd->bd->bi_dram[1].size -
 791                                 board_reserve_ram_top(gd->bd->bi_dram[1].size);
 792                 } else if (gd->bd->bi_dram[0].size >
 793                            board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
 794                         gd->arch.resv_ram = gd->bd->bi_dram[0].start +
 795                                 gd->bd->bi_dram[0].size -
 796                                 board_reserve_ram_top(gd->bd->bi_dram[0].size);
 797                 }
 798         }
 799 #endif  /* CONFIG_FSL_MC_ENET */
 800
 801 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 802 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 803 #error "This SoC shouldn't have DP DDR"
 804 #endif
 805         if (soc_has_dp_ddr()) {
 806                 /* initialize DP-DDR here */
 807                 puts("DP-DDR:  ");
 808                 /*
 809                  * DDR controller use 0 as the base address for binding.
 810                  * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
 811                  */
 812                 dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 813                                           CONFIG_DP_DDR_CTRL,
 814                                           CONFIG_DP_DDR_NUM_CTRLS,
 815                                           CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 816                                           NULL, NULL, NULL);
 817                 if (dp_ddr_size) {
 818                         gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
 819                         gd->bd->bi_dram[2].size = dp_ddr_size;
 820                 } else {
 821                         puts("Not detected");
 822                 }
 823         }
 824 #endif
 825
 826 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 827         debug("%s is called. gd->ram_size is reduced to %lu\n",
 828               __func__, (ulong)gd->ram_size);
 829 #endif
 830
 831         return 0;
 832 }
 833
 834 #if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
 835 void efi_add_known_memory(void)
 836 {
 837         int i;
 838         phys_addr_t ram_start, start;
 839         phys_size_t ram_size;
 840         u64 pages;
 841
 842         /* Add RAM */
 843         for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 844 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 845 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 846 #error "This SoC shouldn't have DP DDR"
 847 #endif
 848                 if (i == 2)
 849                         continue;       /* skip DP-DDR */
 850 #endif
 851                 ram_start = gd->bd->bi_dram[i].start;
 852                 ram_size = gd->bd->bi_dram[i].size;
 853 #ifdef CONFIG_RESV_RAM
 854                 if (gd->arch.resv_ram >= ram_start &&
 855                     gd->arch.resv_ram < ram_start + ram_size)
 856                         ram_size = gd->arch.resv_ram - ram_start;
 857 #endif
 858                 start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
 859                 pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
 860
 861                 efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
 862                                    false);
 863         }
 864 }
 865 #endif
 866
 867 /*
 868  * Before DDR size is known, early MMU table have DDR mapped as device memory
 869  * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
 870  * needs to be set for these mappings.
 871  * If a special case configures DDR with holes in the mapping, the holes need
 872  * to be marked as invalid. This is not implemented in this function.
 873  */
 874 void update_early_mmu_table(void)
 875 {
 876         if (!gd->arch.tlb_addr)
 877                 return;
 878
 879         if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
 880                 mmu_change_region_attr(
 881                                         CONFIG_SYS_SDRAM_BASE,
 882                                         gd->ram_size,
 883                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 884                                         PTE_BLOCK_OUTER_SHARE           |
 885                                         PTE_BLOCK_NS                    |
 886                                         PTE_TYPE_VALID);
 887         } else {
 888                 mmu_change_region_attr(
 889                                         CONFIG_SYS_SDRAM_BASE,
 890                                         CONFIG_SYS_DDR_BLOCK1_SIZE,
 891                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 892                                         PTE_BLOCK_OUTER_SHARE           |
 893                                         PTE_BLOCK_NS                    |
 894                                         PTE_TYPE_VALID);
 895 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 896 #ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
 897 #error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
 898 #endif
 899                 if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
 900                     CONFIG_SYS_DDR_BLOCK2_SIZE) {
 901                         mmu_change_region_attr(
 902                                         CONFIG_SYS_DDR_BLOCK2_BASE,
 903                                         CONFIG_SYS_DDR_BLOCK2_SIZE,
 904                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 905                                         PTE_BLOCK_OUTER_SHARE           |
 906                                         PTE_BLOCK_NS                    |
 907                                         PTE_TYPE_VALID);
 908                         mmu_change_region_attr(
 909                                         CONFIG_SYS_DDR_BLOCK3_BASE,
 910                                         gd->ram_size -
 911                                         CONFIG_SYS_DDR_BLOCK1_SIZE -
 912                                         CONFIG_SYS_DDR_BLOCK2_SIZE,
 913                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 914                                         PTE_BLOCK_OUTER_SHARE           |
 915                                         PTE_BLOCK_NS                    |
 916                                         PTE_TYPE_VALID);
 917                 } else
 918 #endif
 919                 {
 920                         mmu_change_region_attr(
 921                                         CONFIG_SYS_DDR_BLOCK2_BASE,
 922                                         gd->ram_size -
 923                                         CONFIG_SYS_DDR_BLOCK1_SIZE,
 924                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 925                                         PTE_BLOCK_OUTER_SHARE           |
 926                                         PTE_BLOCK_NS                    |
 927                                         PTE_TYPE_VALID);
 928                 }
 929         }
 930 }
 931
 932 __weak int dram_init(void)
 933 {
 934         fsl_initdram();
 935 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 936         /* This will break-before-make MMU for DDR */
 937         update_early_mmu_table();
 938 #endif
 939
 940         return 0;
 941 }