git.sur5r.net Git - u-boot/blob - arch/arm/cpu/armv8/fsl-layerscape/cpu.c

   1 /*
   2  * Copyright 2014-2015 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <fsl_ddr_sdram.h>
   9 #include <asm/io.h>
  10 #include <linux/errno.h>
  11 #include <asm/system.h>
  12 #include <asm/armv8/mmu.h>
  13 #include <asm/io.h>
  14 #include <asm/arch/fsl_serdes.h>
  15 #include <asm/arch/soc.h>
  16 #include <asm/arch/cpu.h>
  17 #include <asm/arch/speed.h>
  18 #ifdef CONFIG_MP
  19 #include <asm/arch/mp.h>
  20 #endif
  21 #include <efi_loader.h>
  22 #include <fm_eth.h>
  23 #include <fsl-mc/fsl_mc.h>
  24 #ifdef CONFIG_FSL_ESDHC
  25 #include <fsl_esdhc.h>
  26 #endif
  27 #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT
  28 #include <asm/armv8/sec_firmware.h>
  29 #endif
  30 #ifdef CONFIG_SYS_FSL_DDR
  31 #include <fsl_ddr.h>
  32 #endif
  33
  34 DECLARE_GLOBAL_DATA_PTR;
  35
  36 struct mm_region *mem_map = early_map;
  37
  38 void cpu_name(char *name)
  39 {
  40         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
  41         unsigned int i, svr, ver;
  42
  43         svr = gur_in32(&gur->svr);
  44         ver = SVR_SOC_VER(svr);
  45
  46         for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
  47                 if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
  48                         strcpy(name, cpu_type_list[i].name);
  49
  50                         if (IS_E_PROCESSOR(svr))
  51                                 strcat(name, "E");
  52
  53                         sprintf(name + strlen(name), " Rev%d.%d",
  54                                 SVR_MAJ(svr), SVR_MIN(svr));
  55                         break;
  56                 }
  57
  58         if (i == ARRAY_SIZE(cpu_type_list))
  59                 strcpy(name, "unknown");
  60 }
  61
  62 #ifndef CONFIG_SYS_DCACHE_OFF
  63 /*
  64  * To start MMU before DDR is available, we create MMU table in SRAM.
  65  * The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
  66  * levels of translation tables here to cover 40-bit address space.
  67  * We use 4KB granule size, with 40 bits physical address, T0SZ=24
  68  * Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
  69  * Note, the debug print in cache_v8.c is not usable for debugging
  70  * these early MMU tables because UART is not yet available.
  71  */
  72 static inline void early_mmu_setup(void)
  73 {
  74         unsigned int el = current_el();
  75
  76         /* global data is already setup, no allocation yet */
  77         gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
  78         gd->arch.tlb_fillptr = gd->arch.tlb_addr;
  79         gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
  80
  81         /* Create early page tables */
  82         setup_pgtables();
  83
  84         /* point TTBR to the new table */
  85         set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
  86                           get_tcr(el, NULL, NULL) &
  87                           ~(TCR_ORGN_MASK | TCR_IRGN_MASK),
  88                           MEMORY_ATTRIBUTES);
  89
  90         set_sctlr(get_sctlr() | CR_M);
  91 }
  92
  93 static void fix_pcie_mmu_map(void)
  94 {
  95 #ifdef CONFIG_LS2080A
  96         unsigned int i;
  97         u32 svr, ver;
  98         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
  99
 100         svr = gur_in32(&gur->svr);
 101         ver = SVR_SOC_VER(svr);
 102
 103         /* Fix PCIE base and size for LS2088A */
 104         if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
 105             (ver == SVR_LS2048A) || (ver == SVR_LS2044A)) {
 106                 for (i = 0; i < ARRAY_SIZE(final_map); i++) {
 107                         switch (final_map[i].phys) {
 108                         case CONFIG_SYS_PCIE1_PHYS_ADDR:
 109                                 final_map[i].phys = 0x2000000000ULL;
 110                                 final_map[i].virt = 0x2000000000ULL;
 111                                 final_map[i].size = 0x800000000ULL;
 112                                 break;
 113                         case CONFIG_SYS_PCIE2_PHYS_ADDR:
 114                                 final_map[i].phys = 0x2800000000ULL;
 115                                 final_map[i].virt = 0x2800000000ULL;
 116                                 final_map[i].size = 0x800000000ULL;
 117                                 break;
 118                         case CONFIG_SYS_PCIE3_PHYS_ADDR:
 119                                 final_map[i].phys = 0x3000000000ULL;
 120                                 final_map[i].virt = 0x3000000000ULL;
 121                                 final_map[i].size = 0x800000000ULL;
 122                                 break;
 123                         case CONFIG_SYS_PCIE4_PHYS_ADDR:
 124                                 final_map[i].phys = 0x3800000000ULL;
 125                                 final_map[i].virt = 0x3800000000ULL;
 126                                 final_map[i].size = 0x800000000ULL;
 127                                 break;
 128                         default:
 129                                 break;
 130                         }
 131                 }
 132         }
 133 #endif
 134 }
 135
 136 /*
 137  * The final tables look similar to early tables, but different in detail.
 138  * These tables are in DRAM. Sub tables are added to enable cache for
 139  * QBMan and OCRAM.
 140  *
 141  * Put the MMU table in secure memory if gd->arch.secure_ram is valid.
 142  * OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
 143  */
 144 static inline void final_mmu_setup(void)
 145 {
 146         u64 tlb_addr_save = gd->arch.tlb_addr;
 147         unsigned int el = current_el();
 148         int index;
 149
 150         /* fix the final_map before filling in the block entries */
 151         fix_pcie_mmu_map();
 152
 153         mem_map = final_map;
 154
 155         /* Update mapping for DDR to actual size */
 156         for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
 157                 /*
 158                  * Find the entry for DDR mapping and update the address and
 159                  * size. Zero-sized mapping will be skipped when creating MMU
 160                  * table.
 161                  */
 162                 switch (final_map[index].virt) {
 163                 case CONFIG_SYS_FSL_DRAM_BASE1:
 164                         final_map[index].virt = gd->bd->bi_dram[0].start;
 165                         final_map[index].phys = gd->bd->bi_dram[0].start;
 166                         final_map[index].size = gd->bd->bi_dram[0].size;
 167                         break;
 168 #ifdef CONFIG_SYS_FSL_DRAM_BASE2
 169                 case CONFIG_SYS_FSL_DRAM_BASE2:
 170 #if (CONFIG_NR_DRAM_BANKS >= 2)
 171                         final_map[index].virt = gd->bd->bi_dram[1].start;
 172                         final_map[index].phys = gd->bd->bi_dram[1].start;
 173                         final_map[index].size = gd->bd->bi_dram[1].size;
 174 #else
 175                         final_map[index].size = 0;
 176 #endif
 177                 break;
 178 #endif
 179 #ifdef CONFIG_SYS_FSL_DRAM_BASE3
 180                 case CONFIG_SYS_FSL_DRAM_BASE3:
 181 #if (CONFIG_NR_DRAM_BANKS >= 3)
 182                         final_map[index].virt = gd->bd->bi_dram[2].start;
 183                         final_map[index].phys = gd->bd->bi_dram[2].start;
 184                         final_map[index].size = gd->bd->bi_dram[2].size;
 185 #else
 186                         final_map[index].size = 0;
 187 #endif
 188                 break;
 189 #endif
 190                 default:
 191                         break;
 192                 }
 193         }
 194
 195 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 196         if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
 197                 if (el == 3) {
 198                         /*
 199                          * Only use gd->arch.secure_ram if the address is
 200                          * recalculated. Align to 4KB for MMU table.
 201                          */
 202                         /* put page tables in secure ram */
 203                         index = ARRAY_SIZE(final_map) - 2;
 204                         gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
 205                         final_map[index].virt = gd->arch.secure_ram & ~0x3;
 206                         final_map[index].phys = final_map[index].virt;
 207                         final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
 208                         final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
 209                         gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
 210                         tlb_addr_save = gd->arch.tlb_addr;
 211                 } else {
 212                         /* Use allocated (board_f.c) memory for TLB */
 213                         tlb_addr_save = gd->arch.tlb_allocated;
 214                         gd->arch.tlb_addr = tlb_addr_save;
 215                 }
 216         }
 217 #endif
 218
 219         /* Reset the fill ptr */
 220         gd->arch.tlb_fillptr = tlb_addr_save;
 221
 222         /* Create normal system page tables */
 223         setup_pgtables();
 224
 225         /* Create emergency page tables */
 226         gd->arch.tlb_addr = gd->arch.tlb_fillptr;
 227         gd->arch.tlb_emerg = gd->arch.tlb_addr;
 228         setup_pgtables();
 229         gd->arch.tlb_addr = tlb_addr_save;
 230
 231         /* Disable cache and MMU */
 232         dcache_disable();       /* TLBs are invalidated */
 233         invalidate_icache_all();
 234
 235         /* point TTBR to the new table */
 236         set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
 237                           MEMORY_ATTRIBUTES);
 238
 239         set_sctlr(get_sctlr() | CR_M);
 240 }
 241
 242 u64 get_page_table_size(void)
 243 {
 244         return 0x10000;
 245 }
 246
 247 int arch_cpu_init(void)
 248 {
 249         icache_enable();
 250         __asm_invalidate_dcache_all();
 251         __asm_invalidate_tlb_all();
 252         early_mmu_setup();
 253         set_sctlr(get_sctlr() | CR_C);
 254         return 0;
 255 }
 256
 257 void mmu_setup(void)
 258 {
 259         final_mmu_setup();
 260 }
 261
 262 /*
 263  * This function is called from common/board_r.c.
 264  * It recreates MMU table in main memory.
 265  */
 266 void enable_caches(void)
 267 {
 268         mmu_setup();
 269         __asm_invalidate_tlb_all();
 270         icache_enable();
 271         dcache_enable();
 272 }
 273 #endif
 274
 275 u32 initiator_type(u32 cluster, int init_id)
 276 {
 277         struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 278         u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
 279         u32 type = 0;
 280
 281         type = gur_in32(&gur->tp_ityp[idx]);
 282         if (type & TP_ITYP_AV)
 283                 return type;
 284
 285         return 0;
 286 }
 287
 288 u32 cpu_pos_mask(void)
 289 {
 290         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 291         int i = 0;
 292         u32 cluster, type, mask = 0;
 293
 294         do {
 295                 int j;
 296
 297                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 298                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 299                         type = initiator_type(cluster, j);
 300                         if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
 301                                 mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
 302                 }
 303                 i++;
 304         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 305
 306         return mask;
 307 }
 308
 309 u32 cpu_mask(void)
 310 {
 311         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 312         int i = 0, count = 0;
 313         u32 cluster, type, mask = 0;
 314
 315         do {
 316                 int j;
 317
 318                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 319                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 320                         type = initiator_type(cluster, j);
 321                         if (type) {
 322                                 if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
 323                                         mask |= 1 << count;
 324                                 count++;
 325                         }
 326                 }
 327                 i++;
 328         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 329
 330         return mask;
 331 }
 332
 333 /*
 334  * Return the number of cores on this SOC.
 335  */
 336 int cpu_numcores(void)
 337 {
 338         return hweight32(cpu_mask());
 339 }
 340
 341 int fsl_qoriq_core_to_cluster(unsigned int core)
 342 {
 343         struct ccsr_gur __iomem *gur =
 344                 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
 345         int i = 0, count = 0;
 346         u32 cluster;
 347
 348         do {
 349                 int j;
 350
 351                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 352                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 353                         if (initiator_type(cluster, j)) {
 354                                 if (count == core)
 355                                         return i;
 356                                 count++;
 357                         }
 358                 }
 359                 i++;
 360         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 361
 362         return -1;      /* cannot identify the cluster */
 363 }
 364
 365 u32 fsl_qoriq_core_to_type(unsigned int core)
 366 {
 367         struct ccsr_gur __iomem *gur =
 368                 (void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
 369         int i = 0, count = 0;
 370         u32 cluster, type;
 371
 372         do {
 373                 int j;
 374
 375                 cluster = gur_in32(&gur->tp_cluster[i].lower);
 376                 for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
 377                         type = initiator_type(cluster, j);
 378                         if (type) {
 379                                 if (count == core)
 380                                         return type;
 381                                 count++;
 382                         }
 383                 }
 384                 i++;
 385         } while ((cluster & TP_CLUSTER_EOC) == 0x0);
 386
 387         return -1;      /* cannot identify the cluster */
 388 }
 389
 390 #ifndef CONFIG_FSL_LSCH3
 391 uint get_svr(void)
 392 {
 393         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 394
 395         return gur_in32(&gur->svr);
 396 }
 397 #endif
 398
 399 #ifdef CONFIG_DISPLAY_CPUINFO
 400 int print_cpuinfo(void)
 401 {
 402         struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
 403         struct sys_info sysinfo;
 404         char buf[32];
 405         unsigned int i, core;
 406         u32 type, rcw, svr = gur_in32(&gur->svr);
 407
 408         puts("SoC: ");
 409
 410         cpu_name(buf);
 411         printf(" %s (0x%x)\n", buf, svr);
 412         memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
 413         get_sys_info(&sysinfo);
 414         puts("Clock Configuration:");
 415         for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
 416                 if (!(i % 3))
 417                         puts("\n       ");
 418                 type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
 419                 printf("CPU%d(%s):%-4s MHz  ", core,
 420                        type == TY_ITYP_VER_A7 ? "A7 " :
 421                        (type == TY_ITYP_VER_A53 ? "A53" :
 422                        (type == TY_ITYP_VER_A57 ? "A57" :
 423                        (type == TY_ITYP_VER_A72 ? "A72" : "   "))),
 424                        strmhz(buf, sysinfo.freq_processor[core]));
 425         }
 426         /* Display platform clock as Bus frequency. */
 427         printf("\n       Bus:      %-4s MHz  ",
 428                strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
 429         printf("DDR:      %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
 430 #ifdef CONFIG_SYS_DPAA_FMAN
 431         printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 432 #endif
 433 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 434         if (soc_has_dp_ddr()) {
 435                 printf("     DP-DDR:   %-4s MT/s",
 436                        strmhz(buf, sysinfo.freq_ddrbus2));
 437         }
 438 #endif
 439         puts("\n");
 440
 441         /*
 442          * Display the RCW, so that no one gets confused as to what RCW
 443          * we're actually using for this boot.
 444          */
 445         puts("Reset Configuration Word (RCW):");
 446         for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
 447                 rcw = gur_in32(&gur->rcwsr[i]);
 448                 if ((i % 4) == 0)
 449                         printf("\n       %08x:", i * 4);
 450                 printf(" %08x", rcw);
 451         }
 452         puts("\n");
 453
 454         return 0;
 455 }
 456 #endif
 457
 458 #ifdef CONFIG_FSL_ESDHC
 459 int cpu_mmc_init(bd_t *bis)
 460 {
 461         return fsl_esdhc_mmc_init(bis);
 462 }
 463 #endif
 464
 465 int cpu_eth_init(bd_t *bis)
 466 {
 467         int error = 0;
 468
 469 #ifdef CONFIG_FSL_MC_ENET
 470         error = fsl_mc_ldpaa_init(bis);
 471 #endif
 472 #ifdef CONFIG_FMAN_ENET
 473         fm_standard_init(bis);
 474 #endif
 475         return error;
 476 }
 477
 478 int arch_early_init_r(void)
 479 {
 480 #ifdef CONFIG_MP
 481         int rv = 1;
 482         u32 psci_ver = 0xffffffff;
 483 #endif
 484
 485 #ifdef CONFIG_SYS_FSL_ERRATUM_A009635
 486         u32 svr_dev_id;
 487         /*
 488          * erratum A009635 is valid only for LS2080A SoC and
 489          * its personalitiesi
 490          */
 491         svr_dev_id = get_svr() >> 16;
 492         if (svr_dev_id == SVR_DEV_LS2080A)
 493                 erratum_a009635();
 494 #endif
 495 #if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
 496         erratum_a009942_check_cpo();
 497 #endif
 498 #ifdef CONFIG_MP
 499 #if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \
 500         defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI)
 501         /* Check the psci version to determine if the psci is supported */
 502         psci_ver = sec_firmware_support_psci_version();
 503 #endif
 504         if (psci_ver == 0xffffffff) {
 505                 rv = fsl_layerscape_wake_seconday_cores();
 506                 if (rv)
 507                         printf("Did not wake secondary cores\n");
 508         }
 509 #endif
 510
 511 #ifdef CONFIG_SYS_HAS_SERDES
 512         fsl_serdes_init();
 513 #endif
 514 #ifdef CONFIG_FMAN_ENET
 515         fman_enet_init();
 516 #endif
 517         return 0;
 518 }
 519
 520 int timer_init(void)
 521 {
 522         u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
 523 #ifdef CONFIG_FSL_LSCH3
 524         u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
 525 #endif
 526 #ifdef CONFIG_LS2080A
 527         u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
 528         u32 svr_dev_id;
 529 #endif
 530 #ifdef COUNTER_FREQUENCY_REAL
 531         unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
 532
 533         /* Update with accurate clock frequency */
 534         asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
 535 #endif
 536
 537 #ifdef CONFIG_FSL_LSCH3
 538         /* Enable timebase for all clusters.
 539          * It is safe to do so even some clusters are not enabled.
 540          */
 541         out_le32(cltbenr, 0xf);
 542 #endif
 543
 544 #ifdef CONFIG_LS2080A
 545         /*
 546          * In certain Layerscape SoCs, the clock for each core's
 547          * has an enable bit in the PMU Physical Core Time Base Enable
 548          * Register (PCTBENR), which allows the watchdog to operate.
 549          */
 550         setbits_le32(pctbenr, 0xff);
 551         /*
 552          * For LS2080A SoC and its personalities, timer controller
 553          * offset is different
 554          */
 555         svr_dev_id = get_svr() >> 16;
 556         if (svr_dev_id == SVR_DEV_LS2080A)
 557                 cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
 558
 559 #endif
 560
 561         /* Enable clock for timer
 562          * This is a global setting.
 563          */
 564         out_le32(cntcr, 0x1);
 565
 566         return 0;
 567 }
 568
 569 __efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
 570
 571 void __efi_runtime reset_cpu(ulong addr)
 572 {
 573         u32 val;
 574
 575         /* Raise RESET_REQ_B */
 576         val = scfg_in32(rstcr);
 577         val |= 0x02;
 578         scfg_out32(rstcr, val);
 579 }
 580
 581 #ifdef CONFIG_EFI_LOADER
 582
 583 void __efi_runtime EFIAPI efi_reset_system(
 584                        enum efi_reset_type reset_type,
 585                        efi_status_t reset_status,
 586                        unsigned long data_size, void *reset_data)
 587 {
 588         switch (reset_type) {
 589         case EFI_RESET_COLD:
 590         case EFI_RESET_WARM:
 591                 reset_cpu(0);
 592                 break;
 593         case EFI_RESET_SHUTDOWN:
 594                 /* Nothing we can do */
 595                 break;
 596         }
 597
 598         while (1) { }
 599 }
 600
 601 void efi_reset_system_init(void)
 602 {
 603        efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
 604 }
 605
 606 #endif
 607
 608 phys_size_t board_reserve_ram_top(phys_size_t ram_size)
 609 {
 610         phys_size_t ram_top = ram_size;
 611
 612 #ifdef CONFIG_FSL_MC_ENET
 613         /* The start address of MC reserved memory needs to be aligned. */
 614         ram_top -= mc_get_dram_block_size();
 615         ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
 616 #endif
 617
 618         return ram_size - ram_top;
 619 }
 620
 621 phys_size_t get_effective_memsize(void)
 622 {
 623         phys_size_t ea_size, rem = 0;
 624
 625         /*
 626          * For ARMv8 SoCs, DDR memory is split into two or three regions. The
 627          * first region is 2GB space at 0x8000_0000. If the memory extends to
 628          * the second region (or the third region if applicable), the secure
 629          * memory and Management Complex (MC) memory should be put into the
 630          * highest region, i.e. the end of DDR memory. CONFIG_MAX_MEM_MAPPED
 631          * is set to the size of first region so U-Boot doesn't relocate itself
 632          * into higher address. Should DDR be configured to skip the first
 633          * region, this function needs to be adjusted.
 634          */
 635         if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
 636                 ea_size = CONFIG_MAX_MEM_MAPPED;
 637                 rem = gd->ram_size - ea_size;
 638         } else {
 639                 ea_size = gd->ram_size;
 640         }
 641
 642 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 643         /* Check if we have enough space for secure memory */
 644         if (rem > CONFIG_SYS_MEM_RESERVE_SECURE) {
 645                 rem -= CONFIG_SYS_MEM_RESERVE_SECURE;
 646         } else {
 647                 if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE) {
 648                         ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 649                         rem = 0;        /* Presume MC requires more memory */
 650                 } else {
 651                         printf("Error: No enough space for secure memory.\n");
 652                 }
 653         }
 654 #endif
 655         /* Check if we have enough memory for MC */
 656         if (rem < board_reserve_ram_top(rem)) {
 657                 /* Not enough memory in high region to reserve */
 658                 if (ea_size > board_reserve_ram_top(rem))
 659                         ea_size -= board_reserve_ram_top(rem);
 660                 else
 661                         printf("Error: No enough space for reserved memory.\n");
 662         }
 663
 664         return ea_size;
 665 }
 666
 667 int dram_init_banksize(void)
 668 {
 669 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 670         phys_size_t dp_ddr_size;
 671 #endif
 672
 673         /*
 674          * gd->ram_size has the total size of DDR memory, less reserved secure
 675          * memory. The DDR extends from low region to high region(s) presuming
 676          * no hole is created with DDR configuration. gd->arch.secure_ram tracks
 677          * the location of secure memory. gd->arch.resv_ram tracks the location
 678          * of reserved memory for Management Complex (MC).
 679          */
 680         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 681         if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
 682                 gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
 683                 gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
 684                 gd->bd->bi_dram[1].size = gd->ram_size -
 685                                           CONFIG_SYS_DDR_BLOCK1_SIZE;
 686 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 687                 if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
 688                         gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
 689                         gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
 690                                                   CONFIG_SYS_DDR_BLOCK2_SIZE;
 691                         gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
 692                 }
 693 #endif
 694         } else {
 695                 gd->bd->bi_dram[0].size = gd->ram_size;
 696         }
 697 #ifdef CONFIG_SYS_MEM_RESERVE_SECURE
 698 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 699         if (gd->bd->bi_dram[2].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
 700                 gd->bd->bi_dram[2].size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 701                 gd->arch.secure_ram = gd->bd->bi_dram[2].start +
 702                                       gd->bd->bi_dram[2].size;
 703                 gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 704                 gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 705         } else
 706 #endif
 707         {
 708                 if (gd->bd->bi_dram[1].size >= CONFIG_SYS_MEM_RESERVE_SECURE) {
 709                         gd->bd->bi_dram[1].size -=
 710                                         CONFIG_SYS_MEM_RESERVE_SECURE;
 711                         gd->arch.secure_ram = gd->bd->bi_dram[1].start +
 712                                               gd->bd->bi_dram[1].size;
 713                         gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 714                         gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 715                 } else if (gd->bd->bi_dram[0].size >
 716                                         CONFIG_SYS_MEM_RESERVE_SECURE) {
 717                         gd->bd->bi_dram[0].size -=
 718                                         CONFIG_SYS_MEM_RESERVE_SECURE;
 719                         gd->arch.secure_ram = gd->bd->bi_dram[0].start +
 720                                               gd->bd->bi_dram[0].size;
 721                         gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
 722                         gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
 723                 }
 724         }
 725 #endif  /* CONFIG_SYS_MEM_RESERVE_SECURE */
 726
 727 #ifdef CONFIG_FSL_MC_ENET
 728         /* Assign memory for MC */
 729 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 730         if (gd->bd->bi_dram[2].size >=
 731             board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
 732                 gd->arch.resv_ram = gd->bd->bi_dram[2].start +
 733                             gd->bd->bi_dram[2].size -
 734                             board_reserve_ram_top(gd->bd->bi_dram[2].size);
 735         } else
 736 #endif
 737         {
 738                 if (gd->bd->bi_dram[1].size >=
 739                     board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
 740                         gd->arch.resv_ram = gd->bd->bi_dram[1].start +
 741                                 gd->bd->bi_dram[1].size -
 742                                 board_reserve_ram_top(gd->bd->bi_dram[1].size);
 743                 } else if (gd->bd->bi_dram[0].size >
 744                            board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
 745                         gd->arch.resv_ram = gd->bd->bi_dram[0].start +
 746                                 gd->bd->bi_dram[0].size -
 747                                 board_reserve_ram_top(gd->bd->bi_dram[0].size);
 748                 }
 749         }
 750 #endif  /* CONFIG_FSL_MC_ENET */
 751
 752 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 753 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 754 #error "This SoC shouldn't have DP DDR"
 755 #endif
 756         if (soc_has_dp_ddr()) {
 757                 /* initialize DP-DDR here */
 758                 puts("DP-DDR:  ");
 759                 /*
 760                  * DDR controller use 0 as the base address for binding.
 761                  * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
 762                  */
 763                 dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
 764                                           CONFIG_DP_DDR_CTRL,
 765                                           CONFIG_DP_DDR_NUM_CTRLS,
 766                                           CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
 767                                           NULL, NULL, NULL);
 768                 if (dp_ddr_size) {
 769                         gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
 770                         gd->bd->bi_dram[2].size = dp_ddr_size;
 771                 } else {
 772                         puts("Not detected");
 773                 }
 774         }
 775 #endif
 776
 777         return 0;
 778 }
 779
 780 #if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
 781 void efi_add_known_memory(void)
 782 {
 783         int i;
 784         phys_addr_t ram_start, start;
 785         phys_size_t ram_size;
 786         u64 pages;
 787
 788         /* Add RAM */
 789         for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 790 #ifdef CONFIG_SYS_DP_DDR_BASE_PHY
 791 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 792 #error "This SoC shouldn't have DP DDR"
 793 #endif
 794                 if (i == 2)
 795                         continue;       /* skip DP-DDR */
 796 #endif
 797                 ram_start = gd->bd->bi_dram[i].start;
 798                 ram_size = gd->bd->bi_dram[i].size;
 799 #ifdef CONFIG_RESV_RAM
 800                 if (gd->arch.resv_ram >= ram_start &&
 801                     gd->arch.resv_ram < ram_start + ram_size)
 802                         ram_size = gd->arch.resv_ram - ram_start;
 803 #endif
 804                 start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
 805                 pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
 806
 807                 efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
 808                                    false);
 809         }
 810 }
 811 #endif
 812
 813 /*
 814  * Before DDR size is known, early MMU table have DDR mapped as device memory
 815  * to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
 816  * needs to be set for these mappings.
 817  * If a special case configures DDR with holes in the mapping, the holes need
 818  * to be marked as invalid. This is not implemented in this function.
 819  */
 820 void update_early_mmu_table(void)
 821 {
 822         if (!gd->arch.tlb_addr)
 823                 return;
 824
 825         if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
 826                 mmu_change_region_attr(
 827                                         CONFIG_SYS_SDRAM_BASE,
 828                                         gd->ram_size,
 829                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 830                                         PTE_BLOCK_OUTER_SHARE           |
 831                                         PTE_BLOCK_NS                    |
 832                                         PTE_TYPE_VALID);
 833         } else {
 834                 mmu_change_region_attr(
 835                                         CONFIG_SYS_SDRAM_BASE,
 836                                         CONFIG_SYS_DDR_BLOCK1_SIZE,
 837                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 838                                         PTE_BLOCK_OUTER_SHARE           |
 839                                         PTE_BLOCK_NS                    |
 840                                         PTE_TYPE_VALID);
 841 #ifdef CONFIG_SYS_DDR_BLOCK3_BASE
 842 #ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
 843 #error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
 844 #endif
 845                 if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
 846                     CONFIG_SYS_DDR_BLOCK2_SIZE) {
 847                         mmu_change_region_attr(
 848                                         CONFIG_SYS_DDR_BLOCK2_BASE,
 849                                         CONFIG_SYS_DDR_BLOCK2_SIZE,
 850                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 851                                         PTE_BLOCK_OUTER_SHARE           |
 852                                         PTE_BLOCK_NS                    |
 853                                         PTE_TYPE_VALID);
 854                         mmu_change_region_attr(
 855                                         CONFIG_SYS_DDR_BLOCK3_BASE,
 856                                         gd->ram_size -
 857                                         CONFIG_SYS_DDR_BLOCK1_SIZE -
 858                                         CONFIG_SYS_DDR_BLOCK2_SIZE,
 859                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 860                                         PTE_BLOCK_OUTER_SHARE           |
 861                                         PTE_BLOCK_NS                    |
 862                                         PTE_TYPE_VALID);
 863                 } else
 864 #endif
 865                 {
 866                         mmu_change_region_attr(
 867                                         CONFIG_SYS_DDR_BLOCK2_BASE,
 868                                         gd->ram_size -
 869                                         CONFIG_SYS_DDR_BLOCK1_SIZE,
 870                                         PTE_BLOCK_MEMTYPE(MT_NORMAL)    |
 871                                         PTE_BLOCK_OUTER_SHARE           |
 872                                         PTE_BLOCK_NS                    |
 873                                         PTE_TYPE_VALID);
 874                 }
 875         }
 876 }
 877
 878 __weak int dram_init(void)
 879 {
 880         fsl_initdram();
 881 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 882         /* This will break-before-make MMU for DDR */
 883         update_early_mmu_table();
 884 #endif
 885
 886         return 0;
 887 }