git.sur5r.net Git - u-boot/blob - arch/arm/dts/armada-388-clearfog.dts

   1 /*
   2  * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
   3  *
   4  *  Copyright (C) 2015 Russell King
   5  *
   6  * This board is in development; the contents of this file work with
   7  * the A1 rev 2.0 of the board, which does not represent final
   8  * production board.  Things will change, don't expect this file to
   9  * remain compatible info the future.
  10  *
  11  * This file is dual-licensed: you can use it either under the terms
  12  * of the GPL or the X11 license, at your option. Note that this dual
  13  * licensing only applies to this file, and not this project as a
  14  * whole.
  15  *
  16  *  a) This file is free software; you can redistribute it and/or
  17  *     modify it under the terms of the GNU General Public License
  18  *     version 2 as published by the Free Software Foundation.
  19  *
  20  *     This file is distributed in the hope that it will be useful
  21  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  *     GNU General Public License for more details.
  24  *
  25  * Or, alternatively
  26  *
  27  *  b) Permission is hereby granted, free of charge, to any person
  28  *     obtaining a copy of this software and associated documentation
  29  *     files (the "Software"), to deal in the Software without
  30  *     restriction, including without limitation the rights to use
  31  *     copy, modify, merge, publish, distribute, sublicense, and/or
  32  *     sell copies of the Software, and to permit persons to whom the
  33  *     Software is furnished to do so, subject to the following
  34  *     conditions:
  35  *
  36  *     The above copyright notice and this permission notice shall be
  37  *     included in all copies or substantial portions of the Software.
  38  *
  39  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  40  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  41  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  42  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  43  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  44  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  45  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  46  *     OTHER DEALINGS IN THE SOFTWARE.
  47  */
  48
  49 /dts-v1/;
  50 #include <dt-bindings/input/input.h>
  51 #include <dt-bindings/gpio/gpio.h>
  52 #include "armada-388.dtsi"
  53
  54 / {
  55         model = "SolidRun Clearfog A1";
  56         compatible = "solidrun,clearfog-a1", "marvell,armada388",
  57                 "marvell,armada385", "marvell,armada380";
  58
  59         aliases {
  60                 /* So that mvebu u-boot can update the MAC addresses */
  61                 ethernet1 = &eth0;
  62                 ethernet2 = &eth1;
  63                 ethernet3 = &eth2;
  64                 spi1 = &spi1;
  65         };
  66
  67         chosen {
  68                 stdout-path = "serial0:115200n8";
  69         };
  70
  71         memory {
  72                 device_type = "memory";
  73                 reg = <0x00000000 0x10000000>; /* 256 MB */
  74         };
  75
  76         reg_3p3v: regulator-3p3v {
  77                 compatible = "regulator-fixed";
  78                 regulator-name = "3P3V";
  79                 regulator-min-microvolt = <3300000>;
  80                 regulator-max-microvolt = <3300000>;
  81                 regulator-always-on;
  82         };
  83
  84         soc {
  85                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  86                           MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
  87                           MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
  88                           MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
  89
  90                 internal-regs {
  91                         ethernet@30000 {
  92                                 mac-address = [00 50 43 02 02 02];
  93                                 phy-mode = "sgmii";
  94                                 status = "okay";
  95
  96                                 fixed-link {
  97                                         speed = <1000>;
  98                                         full-duplex;
  99                                 };
 100                         };
 101
 102                         ethernet@34000 {
 103                                 mac-address = [00 50 43 02 02 03];
 104                                 managed = "in-band-status";
 105                                 phy-mode = "sgmii";
 106                                 status = "okay";
 107                         };
 108
 109                         ethernet@70000 {
 110                                 mac-address = [00 50 43 02 02 01];
 111                                 pinctrl-0 = <&ge0_rgmii_pins>;
 112                                 pinctrl-names = "default";
 113                                 phy = <&phy_dedicated>;
 114                                 phy-mode = "rgmii-id";
 115                                 status = "okay";
 116                         };
 117
 118                         i2c@11000 {
 119                                 /* Is there anything on this? */
 120                                 clock-frequency = <100000>;
 121                                 pinctrl-0 = <&i2c0_pins>;
 122                                 pinctrl-names = "default";
 123                                 status = "okay";
 124
 125                                 /*
 126                                  * PCA9655 GPIO expander, up to 1MHz clock.
 127                                  *  0-CON3 CLKREQ#
 128                                  *  1-CON3 PERST#
 129                                  *  2-CON2 PERST#
 130                                  *  3-CON3 W_DISABLE
 131                                  *  4-CON2 CLKREQ#
 132                                  *  5-USB3 overcurrent
 133                                  *  6-USB3 power
 134                                  *  7-CON2 W_DISABLE
 135                                  *  8-JP4 P1
 136                                  *  9-JP4 P4
 137                                  * 10-JP4 P5
 138                                  * 11-m.2 DEVSLP
 139                                  * 12-SFP_LOS
 140                                  * 13-SFP_TX_FAULT
 141                                  * 14-SFP_TX_DISABLE
 142                                  * 15-SFP_MOD_DEF0
 143                                  */
 144                                 expander0: gpio-expander@20 {
 145                                         /*
 146                                          * This is how it should be:
 147                                          * compatible = "onnn,pca9655",
 148                                          *       "nxp,pca9555";
 149                                          * but you can't do this because of
 150                                          * the way I2C works.
 151                                          */
 152                                         compatible = "nxp,pca9555";
 153                                         gpio-controller;
 154                                         #gpio-cells = <2>;
 155                                         reg = <0x20>;
 156
 157                                         pcie1_0_clkreq {
 158                                                 gpio-hog;
 159                                                 gpios = <0 GPIO_ACTIVE_LOW>;
 160                                                 input;
 161                                                 line-name = "pcie1.0-clkreq";
 162                                         };
 163                                         pcie1_0_w_disable {
 164                                                 gpio-hog;
 165                                                 gpios = <3 GPIO_ACTIVE_LOW>;
 166                                                 output-low;
 167                                                 line-name = "pcie1.0-w-disable";
 168                                         };
 169                                         pcie2_0_clkreq {
 170                                                 gpio-hog;
 171                                                 gpios = <4 GPIO_ACTIVE_LOW>;
 172                                                 input;
 173                                                 line-name = "pcie2.0-clkreq";
 174                                         };
 175                                         pcie2_0_w_disable {
 176                                                 gpio-hog;
 177                                                 gpios = <7 GPIO_ACTIVE_LOW>;
 178                                                 output-low;
 179                                                 line-name = "pcie2.0-w-disable";
 180                                         };
 181                                         usb3_ilimit {
 182                                                 gpio-hog;
 183                                                 gpios = <5 GPIO_ACTIVE_LOW>;
 184                                                 input;
 185                                                 line-name = "usb3-current-limit";
 186                                         };
 187                                         usb3_power {
 188                                                 gpio-hog;
 189                                                 gpios = <6 GPIO_ACTIVE_HIGH>;
 190                                                 output-high;
 191                                                 line-name = "usb3-power";
 192                                         };
 193                                         m2_devslp {
 194                                                 gpio-hog;
 195                                                 gpios = <11 GPIO_ACTIVE_HIGH>;
 196                                                 output-low;
 197                                                 line-name = "m.2 devslp";
 198                                         };
 199                                 };
 200
 201                                 /* The MCP3021 is 100kHz clock only */
 202                                 mikrobus_adc: mcp3021@4c {
 203                                         compatible = "microchip,mcp3021";
 204                                         reg = <0x4c>;
 205                                 };
 206
 207                                 /* Also something at 0x64 */
 208                         };
 209
 210                         i2c@11100 {
 211                                 /*
 212                                  * Routed to SFP, mikrobus, and PCIe.
 213                                  * SFP limits this to 100kHz, and requires
 214                                  *  an AT24C01A/02/04 with address pins tied
 215                                  *  low, which takes addresses 0x50 and 0x51.
 216                                  * Mikrobus doesn't specify beyond an I2C
 217                                  *  bus being present.
 218                                  * PCIe uses ARP to assign addresses, or
 219                                  *  0x63-0x64.
 220                                  */
 221                                 clock-frequency = <100000>;
 222                                 pinctrl-0 = <&clearfog_i2c1_pins>;
 223                                 pinctrl-names = "default";
 224                                 status = "okay";
 225                         };
 226
 227                         mdio@72004 {
 228                                 pinctrl-0 = <&mdio_pins>;
 229                                 pinctrl-names = "default";
 230
 231                                 phy_dedicated: ethernet-phy@0 {
 232                                         /*
 233                                          * Annoyingly, the marvell phy driver
 234                                          * configures the LED register, rather
 235                                          * than preserving reset-loaded setting.
 236                                          * We undo that rubbish here.
 237                                          */
 238                                         marvell,reg-init = <3 16 0 0x101e>;
 239                                         reg = <0>;
 240                                 };
 241                         };
 242
 243                         pinctrl@18000 {
 244                                 clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
 245                                         marvell,pins = "mpp46";
 246                                         marvell,function = "ref";
 247                                 };
 248                                 clearfog_dsa0_pins: clearfog-dsa0-pins {
 249                                         marvell,pins = "mpp23", "mpp41";
 250                                         marvell,function = "gpio";
 251                                 };
 252                                 clearfog_i2c1_pins: i2c1-pins {
 253                                         /* SFP, PCIe, mSATA, mikrobus */
 254                                         marvell,pins = "mpp26", "mpp27";
 255                                         marvell,function = "i2c1";
 256                                 };
 257                                 clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
 258                                         marvell,pins = "mpp20";
 259                                         marvell,function = "gpio";
 260                                 };
 261                                 clearfog_sdhci_pins: clearfog-sdhci-pins {
 262                                         marvell,pins = "mpp21", "mpp28",
 263                                                        "mpp37", "mpp38",
 264                                                        "mpp39", "mpp40";
 265                                         marvell,function = "sd0";
 266                                 };
 267                                 clearfog_spi1_cs_pins: spi1-cs-pins {
 268                                         marvell,pins = "mpp55";
 269                                         marvell,function = "spi1";
 270                                 };
 271                                 mikro_pins: mikro-pins {
 272                                         /* int: mpp22 rst: mpp29 */
 273                                         marvell,pins = "mpp22", "mpp29";
 274                                         marvell,function = "gpio";
 275                                 };
 276                                 mikro_spi_pins: mikro-spi-pins {
 277                                         marvell,pins = "mpp43";
 278                                         marvell,function = "spi1";
 279                                 };
 280                                 mikro_uart_pins: mikro-uart-pins {
 281                                         marvell,pins = "mpp24", "mpp25";
 282                                         marvell,function = "ua1";
 283                                 };
 284                                 rear_button_pins: rear-button-pins {
 285                                         marvell,pins = "mpp34";
 286                                         marvell,function = "gpio";
 287                                 };
 288                         };
 289
 290                         rtc@a3800 {
 291                                 /*
 292                                  * If the rtc doesn't work, run "date reset"
 293                                  * twice in u-boot.
 294                                  */
 295                                 status = "okay";
 296                         };
 297
 298                         sata@a8000 {
 299                                 /* pinctrl? */
 300                                 status = "okay";
 301                         };
 302
 303                         sata@e0000 {
 304                                 /* pinctrl? */
 305                                 status = "okay";
 306                         };
 307
 308                         sdhci@d8000 {
 309                                 bus-width = <4>;
 310                                 cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 311                                 no-1-8-v;
 312                                 pinctrl-0 = <&clearfog_sdhci_pins
 313                                              &clearfog_sdhci_cd_pins>;
 314                                 pinctrl-names = "default";
 315                                 status = "okay";
 316                                 vmmc = <&reg_3p3v>;
 317                                 wp-inverted;
 318                         };
 319
 320                         serial@12000 {
 321                                 pinctrl-0 = <&uart0_pins>;
 322                                 pinctrl-names = "default";
 323                                 status = "okay";
 324                                 u-boot,dm-pre-reloc;
 325                         };
 326
 327                         serial@12100 {
 328                                 /* mikrobus uart */
 329                                 pinctrl-0 = <&mikro_uart_pins>;
 330                                 pinctrl-names = "default";
 331                                 status = "okay";
 332                         };
 333
 334                         spi1: spi@10680 {
 335                                 /*
 336                                  * CS0: W25Q32
 337                                  * CS1:
 338                                  * CS2: mikrobus
 339                                  */
 340                                 pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
 341                                 pinctrl-names = "default";
 342                                 status = "okay";
 343
 344                                 spi-flash@0 {
 345                                         #address-cells = <1>;
 346                                         #size-cells = <0>;
 347                                         compatible = "w25q32", "jedec,spi-nor", "spi-flash";
 348                                         reg = <0>; /* Chip select 0 */
 349                                         spi-max-frequency = <3000000>;
 350                                 };
 351                         };
 352
 353                         usb3@f8000 {
 354                                 status = "okay";
 355                         };
 356                 };
 357
 358                 pcie-controller {
 359                         status = "okay";
 360                         /*
 361                          * The two PCIe units are accessible through
 362                          * the mini-PCIe connectors on the board.
 363                          */
 364                         pcie@2,0 {
 365                                 /* Port 1, Lane 0. CONN3, nearest power. */
 366                                 reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
 367                                 status = "okay";
 368                         };
 369                         pcie@3,0 {
 370                                 /* Port 2, Lane 0. CONN2, nearest CPU. */
 371                                 reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
 372                                 status = "okay";
 373                         };
 374                 };
 375         };
 376
 377         sfp: sfp {
 378                 compatible = "sff,sfp";
 379                 i2c-bus = <&i2c1>;
 380                 los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
 381                 moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
 382                 sfp,ethernet = <&eth2>;
 383                 tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
 384                 tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
 385         };
 386
 387         dsa@0 {
 388                 compatible = "marvell,dsa";
 389                 dsa,ethernet = <&eth1>;
 390                 dsa,mii-bus = <&mdio>;
 391                 pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
 392                 pinctrl-names = "default";
 393                 #address-cells = <2>;
 394                 #size-cells = <0>;
 395
 396                 switch@0 {
 397                         #address-cells = <1>;
 398                         #size-cells = <0>;
 399                         reg = <4 0>;
 400
 401                         port@0 {
 402                                 reg = <0>;
 403                                 label = "lan1";
 404                         };
 405
 406                         port@1 {
 407                                 reg = <1>;
 408                                 label = "lan2";
 409                         };
 410
 411                         port@2 {
 412                                 reg = <2>;
 413                                 label = "lan3";
 414                         };
 415
 416                         port@3 {
 417                                 reg = <3>;
 418                                 label = "lan4";
 419                         };
 420
 421                         port@4 {
 422                                 reg = <4>;
 423                                 label = "lan5";
 424                         };
 425
 426                         port@5 {
 427                                 reg = <5>;
 428                                 label = "cpu";
 429                         };
 430
 431                         port@6 {
 432                                 /* 88E1512 external phy */
 433                                 reg = <6>;
 434                                 label = "lan6";
 435                                 fixed-link {
 436                                         speed = <1000>;
 437                                         full-duplex;
 438                                 };
 439                         };
 440                 };
 441         };
 442
 443         gpio-keys {
 444                 compatible = "gpio-keys";
 445                 pinctrl-0 = <&rear_button_pins>;
 446                 pinctrl-names = "default";
 447
 448                 button_0 {
 449                         /* The rear SW3 button */
 450                         label = "Rear Button";
 451                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 452                         linux,can-disable;
 453                         linux,code = <BTN_0>;
 454                 };
 455         };
 456 };
 457
 458 /*
 459 +#define A38x_CUSTOMER_BOARD_1_MPP16_23         0x00400011
 460 MPP18: gpio             ? (pca9655 int?)
 461 MPP19: gpio             ? (clkreq?)
 462 MPP20: gpio             ? (sd0 detect)
 463 MPP21: sd0:cmd          x sd0
 464 MPP22: gpio             x mikro int
 465 MPP23: gpio             x switch irq
 466 +#define A38x_CUSTOMER_BOARD_1_MPP24_31         0x22043333
 467 MPP24: ua1:rxd          x mikro rx
 468 MPP25: ua1:txd          x mikro tx
 469 MPP26: i2c1:sck         x mikro sck
 470 MPP27: i2c1:sda         x mikro sda
 471 MPP28: sd0:clk          x sd0
 472 MPP29: gpio             x mikro rst
 473 MPP30: ge1:txd2         ? (config)
 474 MPP31: ge1:txd3         ? (config)
 475 +#define A38x_CUSTOMER_BOARD_1_MPP32_39         0x44400002
 476 MPP32: ge1:txctl        ? (unused)
 477 MPP33: gpio             ? (pic_com0)
 478 MPP34: gpio             x rear button (pic_com1)
 479 MPP35: gpio             ? (pic_com2)
 480 MPP36: gpio             ? (unused)
 481 MPP37: sd0:d3           x sd0
 482 MPP38: sd0:d0           x sd0
 483 MPP39: sd0:d1           x sd0
 484 +#define A38x_CUSTOMER_BOARD_1_MPP40_47         0x41144004
 485 MPP40: sd0:d2           x sd0
 486 MPP41: gpio             x switch reset
 487 MPP42: gpio             ? sw1-1
 488 MPP43: spi1:cs2         x mikro cs
 489 MPP44: sata3:prsnt      ? (unused)
 490 MPP45: ref:clk_out0     ?
 491 MPP46: ref:clk_out1     x switch clk
 492 MPP47: 4                ? (unused)
 493 +#define A38x_CUSTOMER_BOARD_1_MPP48_55         0x40333333
 494 MPP48: tdm:pclk
 495 MPP49: tdm:fsync
 496 MPP50: tdm:drx
 497 MPP51: tdm:dtx
 498 MPP52: tdm:int
 499 MPP53: tdm:rst
 500 MPP54: gpio             ? (pwm)
 501 MPP55: spi1:cs1         x slic
 502 +#define A38x_CUSTOMER_BOARD_1_MPP56_63         0x00004444
 503 MPP56: spi1:mosi        x mikro mosi
 504 MPP57: spi1:sck         x mikro sck
 505 MPP58: spi1:miso        x mikro miso
 506 MPP59: spi1:cs0         x w25q32
 507 */