2 #include "sama5d2.dtsi"
3 #include "sama5d2-pinfunc.h"
6 model = "Atmel SAMA5D2 Xplained";
7 compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
17 atmel,vbus-gpio = <&pioA 42 0>;
18 pinctrl-names = "default";
19 pinctrl-0 = <&pinctrl_usb_default>;
27 sdmmc0: sdio-host@a0000000 {
29 pinctrl-names = "default";
30 pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
35 sdmmc1: sdio-host@b0000000 {
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
39 status = "okay"; /* conflict with qspi0 */
48 compatible = "atmel,sama5d2-qspi-flash";
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_qspi0_default>;
54 spi-max-frequency = <83000000>;
58 reg = <0x00000000 0x00c00000>;
63 reg = <0x00c00000 0x00000000>;
69 cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
70 pinctrl-names = "default";
71 pinctrl-0 = <&pinctrl_spi0_default>;
76 compatible = "spi-flash";
78 spi-max-frequency = <50000000>;
83 macb0: ethernet@f8008000 {
84 pinctrl-names = "default";
85 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
94 uart1: serial@f8020000 {
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_uart1_default>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_i2c1_default>;
107 pioA: gpio@fc038000 {
109 pinctrl_i2c1_default: i2c1_default {
110 pinmux = <PIN_PD4__TWD1>,
115 pinctrl_macb0_phy_irq: macb0_phy_irq {
116 pinmux = <PIN_PC9__GPIO>;
120 pinctrl_macb0_rmii: macb0_rmii {
121 pinmux = <PIN_PB14__GTXCK>,
134 pinctrl_qspi0_default: qspi0_default {
135 pinmux = <PIN_PA22__QSPI0_SCK>,
136 <PIN_PA23__QSPI0_CS>,
137 <PIN_PA24__QSPI0_IO0>,
138 <PIN_PA25__QSPI0_IO1>,
139 <PIN_PA26__QSPI0_IO2>,
140 <PIN_PA27__QSPI0_IO3>;
144 pinctrl_sdmmc0_cmd_dat_default: sdmmc0_cmd_dat_default {
145 pinmux = <PIN_PA1__SDMMC0_CMD>,
146 <PIN_PA2__SDMMC0_DAT0>,
147 <PIN_PA3__SDMMC0_DAT1>,
148 <PIN_PA4__SDMMC0_DAT2>,
149 <PIN_PA5__SDMMC0_DAT3>,
150 <PIN_PA6__SDMMC0_DAT4>,
151 <PIN_PA7__SDMMC0_DAT5>,
152 <PIN_PA8__SDMMC0_DAT6>,
153 <PIN_PA9__SDMMC0_DAT7>;
158 pinctrl_sdmmc0_ck_cd_default: sdmmc0_ck_cd_default {
159 pinmux = <PIN_PA0__SDMMC0_CK>,
160 <PIN_PA10__SDMMC0_RSTN>,
161 <PIN_PA11__SDMMC0_VDDSEL>,
162 <PIN_PA13__SDMMC0_CD>;
167 pinctrl_sdmmc1_cmd_dat_default: sdmmc1_cmd_dat_default {
168 pinmux = <PIN_PA28__SDMMC1_CMD>,
169 <PIN_PA18__SDMMC1_DAT0>,
170 <PIN_PA19__SDMMC1_DAT1>,
171 <PIN_PA20__SDMMC1_DAT2>,
172 <PIN_PA21__SDMMC1_DAT3>;
177 pinctrl_sdmmc1_ck_cd_default: sdmmc1_ck_cd_default {
178 pinmux = <PIN_PA22__SDMMC1_CK>,
179 <PIN_PA30__SDMMC1_CD>;
184 pinctrl_spi0_default: spi0_default {
185 pinmux = <PIN_PA14__SPI0_SPCK>,
186 <PIN_PA15__SPI0_MOSI>,
187 <PIN_PA16__SPI0_MISO>;
192 pinctrl_uart1_default: uart1_default {
193 pinmux = <PIN_PD2__URXD1>,
199 pinctrl_usb_default: usb_default {
200 pinmux = <PIN_PB10__GPIO>;
204 pinctrl_usba_vbus: usba_vbus {
205 pinmux = <PIN_PA31__GPIO>;