]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/dra7-evm.dts
rockchip: dts: tinker: add usb host power supply node
[u-boot] / arch / arm / dts / dra7-evm.dts
1 /*
2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8 /dts-v1/;
9
10 #include "dra74x.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/clk/ti-dra7-atl.h>
13 #include <dt-bindings/input/input.h>
14
15 / {
16         model = "TI DRA742";
17         compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
18
19         chosen {
20                 stdout-path = &uart1;
21                 tick-timer = &timer2;
22         };
23
24         memory@0 {
25                 device_type = "memory";
26                 reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
27         };
28
29         evm_3v3_sd: fixedregulator-sd {
30                 compatible = "regulator-fixed";
31                 regulator-name = "evm_3v3_sd";
32                 regulator-min-microvolt = <3300000>;
33                 regulator-max-microvolt = <3300000>;
34                 enable-active-high;
35                 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
36         };
37
38         evm_3v3_sw: fixedregulator-evm_3v3_sw {
39                 compatible = "regulator-fixed";
40                 regulator-name = "evm_3v3_sw";
41                 vin-supply = <&sysen1>;
42                 regulator-min-microvolt = <3300000>;
43                 regulator-max-microvolt = <3300000>;
44         };
45
46         aic_dvdd: fixedregulator-aic_dvdd {
47                 /* TPS77018DBVT */
48                 compatible = "regulator-fixed";
49                 regulator-name = "aic_dvdd";
50                 vin-supply = <&evm_3v3_sw>;
51                 regulator-min-microvolt = <1800000>;
52                 regulator-max-microvolt = <1800000>;
53         };
54
55         extcon_usb1: extcon_usb1 {
56                 compatible = "linux,extcon-usb-gpio";
57                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
58         };
59
60         extcon_usb2: extcon_usb2 {
61                 compatible = "linux,extcon-usb-gpio";
62                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
63         };
64
65         vtt_fixed: fixedregulator-vtt {
66                 compatible = "regulator-fixed";
67                 regulator-name = "vtt_fixed";
68                 regulator-min-microvolt = <1350000>;
69                 regulator-max-microvolt = <1350000>;
70                 regulator-always-on;
71                 regulator-boot-on;
72                 enable-active-high;
73                 vin-supply = <&sysen2>;
74                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
75         };
76
77         sound0: sound0 {
78                 compatible = "simple-audio-card";
79                 simple-audio-card,name = "DRA7xx-EVM";
80                 simple-audio-card,widgets =
81                         "Headphone", "Headphone Jack",
82                         "Line", "Line Out",
83                         "Microphone", "Mic Jack",
84                         "Line", "Line In";
85                 simple-audio-card,routing =
86                         "Headphone Jack",       "HPLOUT",
87                         "Headphone Jack",       "HPROUT",
88                         "Line Out",             "LLOUT",
89                         "Line Out",             "RLOUT",
90                         "MIC3L",                "Mic Jack",
91                         "MIC3R",                "Mic Jack",
92                         "Mic Jack",             "Mic Bias",
93                         "LINE1L",               "Line In",
94                         "LINE1R",               "Line In";
95                 simple-audio-card,format = "dsp_b";
96                 simple-audio-card,bitclock-master = <&sound0_master>;
97                 simple-audio-card,frame-master = <&sound0_master>;
98                 simple-audio-card,bitclock-inversion;
99
100                 sound0_master: simple-audio-card,cpu {
101                         sound-dai = <&mcasp3>;
102                         system-clock-frequency = <5644800>;
103                 };
104
105                 simple-audio-card,codec {
106                         sound-dai = <&tlv320aic3106>;
107                         clocks = <&atl_clkin2_ck>;
108                 };
109         };
110
111         leds {
112                 compatible = "gpio-leds";
113                 led0 {
114                         label = "dra7:usr1";
115                         gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
116                         default-state = "off";
117                 };
118
119                 led1 {
120                         label = "dra7:usr2";
121                         gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
122                         default-state = "off";
123                 };
124
125                 led2 {
126                         label = "dra7:usr3";
127                         gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
128                         default-state = "off";
129                 };
130
131                 led3 {
132                         label = "dra7:usr4";
133                         gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
134                         default-state = "off";
135                 };
136         };
137
138         gpio_keys {
139                 compatible = "gpio-keys";
140                 #address-cells = <1>;
141                 #size-cells = <0>;
142                 autorepeat;
143
144                 USER1 {
145                         label = "btnUser1";
146                         linux,code = <BTN_0>;
147                         gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
148                 };
149
150                 USER2 {
151                         label = "btnUser2";
152                         linux,code = <BTN_1>;
153                         gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
154                 };
155         };
156 };
157
158 &dra7_pmx_core {
159         pinctrl-names = "default";
160         pinctrl-0 = <&vtt_pin>;
161
162         vtt_pin: pinmux_vtt_pin {
163                 pinctrl-single,pins = <
164                         DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
165                 >;
166         };
167
168         i2c1_pins: pinmux_i2c1_pins {
169                 pinctrl-single,pins = <
170                         DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
171                         DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
172                 >;
173         };
174
175         i2c2_pins: pinmux_i2c2_pins {
176                 pinctrl-single,pins = <
177                         DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
178                         DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
179                 >;
180         };
181
182         i2c3_pins: pinmux_i2c3_pins {
183                 pinctrl-single,pins = <
184                         DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
185                         DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
186                 >;
187         };
188
189         mcspi1_pins: pinmux_mcspi1_pins {
190                 pinctrl-single,pins = <
191                         DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
192                         DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
193                         DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
194                         DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
195                         DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
196                         DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
197                 >;
198         };
199
200         mcspi2_pins: pinmux_mcspi2_pins {
201                 pinctrl-single,pins = <
202                         DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
203                         DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
204                         DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
205                         DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
206                 >;
207         };
208
209         uart1_pins: pinmux_uart1_pins {
210                 pinctrl-single,pins = <
211                         DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
212                         DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
213                         DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
214                         DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
215                 >;
216         };
217
218         uart2_pins: pinmux_uart2_pins {
219                 pinctrl-single,pins = <
220                         DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
221                         DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
222                         DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
223                         DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
224                 >;
225         };
226
227         uart3_pins: pinmux_uart3_pins {
228                 pinctrl-single,pins = <
229                         DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
230                         DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
231                 >;
232         };
233
234         usb1_pins: pinmux_usb1_pins {
235                 pinctrl-single,pins = <
236                         DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
237                 >;
238         };
239
240         usb2_pins: pinmux_usb2_pins {
241                 pinctrl-single,pins = <
242                         DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
243                 >;
244         };
245
246         nand_flash_x16: nand_flash_x16 {
247                 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
248                  * So NAND flash requires following switch settings:
249                  * SW5.1 (NAND_BOOTn) = ON (LOW)
250                  * SW5.9 (GPMC_WPN) = OFF (HIGH)
251                  */
252                 pinctrl-single,pins = <
253                         DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad0     */
254                         DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad1     */
255                         DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad2     */
256                         DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad3     */
257                         DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad4     */
258                         DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad5     */
259                         DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad6     */
260                         DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad7     */
261                         DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad8     */
262                         DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad9     */
263                         DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad10    */
264                         DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad11    */
265                         DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad12    */
266                         DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad13    */
267                         DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad14    */
268                         DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad15    */
269                         DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)        /* gpmc_wait0   */
270                         DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)       /* gpmc_wen     */
271                         DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* gpmc_csn0    */
272                         DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)       /* gpmc_advn_ale */
273                         DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_oen_ren  */
274                         DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_be0n_cle */
275                 >;
276         };
277
278         cpsw_default: cpsw_default {
279                 pinctrl-single,pins = <
280                         /* Slave 1 */
281                         DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txc.rgmii0_txc */
282                         DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txctl.rgmii0_txctl */
283                         DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td3.rgmii0_txd3 */
284                         DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd2.rgmii0_txd2 */
285                         DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd1.rgmii0_txd1 */
286                         DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd0.rgmii0_txd0 */
287                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxc.rgmii0_rxc */
288                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxctl.rgmii0_rxctl */
289                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd3.rgmii0_rxd3 */
290                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd2.rgmii0_rxd2 */
291                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd1.rgmii0_rxd1 */
292                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd0.rgmii0_rxd0 */
293
294                         /* Slave 2 */
295                         DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d12.rgmii1_txc */
296                         DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d13.rgmii1_tctl */
297                         DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d14.rgmii1_td3 */
298                         DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d15.rgmii1_td2 */
299                         DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d16.rgmii1_td1 */
300                         DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d17.rgmii1_td0 */
301                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)        /* vin2a_d18.rgmii1_rclk */
302                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)        /* vin2a_d19.rgmii1_rctl */
303                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)        /* vin2a_d20.rgmii1_rd3 */
304                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)        /* vin2a_d21.rgmii1_rd2 */
305                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)        /* vin2a_d22.rgmii1_rd1 */
306                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)        /* vin2a_d23.rgmii1_rd0 */
307                 >;
308
309         };
310
311         cpsw_sleep: cpsw_sleep {
312                 pinctrl-single,pins = <
313                         /* Slave 1 */
314                         DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
315                         DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
316                         DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
317                         DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
318                         DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
319                         DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
320                         DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
321                         DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
322                         DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
323                         DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
324                         DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
325                         DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
326
327                         /* Slave 2 */
328                         DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
329                         DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
330                         DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
331                         DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
332                         DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
333                         DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
334                         DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
335                         DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
336                         DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
337                         DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
338                         DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
339                         DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
340                 >;
341         };
342
343         davinci_mdio_default: davinci_mdio_default {
344                 pinctrl-single,pins = <
345                         DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* mdio_d.mdio_d */
346                         DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
347                 >;
348         };
349
350         davinci_mdio_sleep: davinci_mdio_sleep {
351                 pinctrl-single,pins = <
352                         DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
353                         DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
354                 >;
355         };
356
357         dcan1_pins_default: dcan1_pins_default {
358                 pinctrl-single,pins = <
359                         DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
360                         DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
361                 >;
362         };
363
364         dcan1_pins_sleep: dcan1_pins_sleep {
365                 pinctrl-single,pins = <
366                         DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
367                         DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
368                 >;
369         };
370
371         atl_pins: pinmux_atl_pins {
372                 pinctrl-single,pins = <
373                         DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)       /* xref_clk1.atl_clk1 */
374                         DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)       /* xref_clk2.atl_clk2 */
375                 >;
376         };
377
378         mcasp3_pins: pinmux_mcasp3_pins {
379                 pinctrl-single,pins = <
380                         DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_aclkx */
381                         DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_fsx */
382                         DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_axr0 */
383                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcasp3_axr1 */
384                 >;
385         };
386
387         mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
388                 pinctrl-single,pins = <
389                         DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
390                         DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
391                         DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
392                         DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
393                 >;
394         };
395 };
396
397 &i2c1 {
398         status = "okay";
399         pinctrl-names = "default";
400         pinctrl-0 = <&i2c1_pins>;
401         clock-frequency = <400000>;
402
403         tps659038: tps659038@58 {
404                 compatible = "ti,tps659038";
405                 reg = <0x58>;
406
407                 tps659038_pmic {
408                         compatible = "ti,tps659038-pmic";
409
410                         regulators {
411                                 smps123_reg: smps123 {
412                                         /* VDD_MPU */
413                                         regulator-name = "smps123";
414                                         regulator-min-microvolt = < 850000>;
415                                         regulator-max-microvolt = <1250000>;
416                                         regulator-always-on;
417                                         regulator-boot-on;
418                                 };
419
420                                 smps45_reg: smps45 {
421                                         /* VDD_DSPEVE */
422                                         regulator-name = "smps45";
423                                         regulator-min-microvolt = < 850000>;
424                                         regulator-max-microvolt = <1250000>;
425                                         regulator-always-on;
426                                         regulator-boot-on;
427                                 };
428
429                                 smps6_reg: smps6 {
430                                         /* VDD_GPU - over VDD_SMPS6 */
431                                         regulator-name = "smps6";
432                                         regulator-min-microvolt = <850000>;
433                                         regulator-max-microvolt = <1250000>;
434                                         regulator-always-on;
435                                         regulator-boot-on;
436                                 };
437
438                                 smps7_reg: smps7 {
439                                         /* CORE_VDD */
440                                         regulator-name = "smps7";
441                                         regulator-min-microvolt = <850000>;
442                                         regulator-max-microvolt = <1150000>;
443                                         regulator-always-on;
444                                         regulator-boot-on;
445                                 };
446
447                                 smps8_reg: smps8 {
448                                         /* VDD_IVAHD */
449                                         regulator-name = "smps8";
450                                         regulator-min-microvolt = < 850000>;
451                                         regulator-max-microvolt = <1250000>;
452                                         regulator-always-on;
453                                         regulator-boot-on;
454                                 };
455
456                                 smps9_reg: smps9 {
457                                         /* VDDS1V8 */
458                                         regulator-name = "smps9";
459                                         regulator-min-microvolt = <1800000>;
460                                         regulator-max-microvolt = <1800000>;
461                                         regulator-always-on;
462                                         regulator-boot-on;
463                                 };
464
465                                 ldo1_reg: ldo1 {
466                                         /* LDO1_OUT --> SDIO  */
467                                         regulator-name = "ldo1";
468                                         regulator-min-microvolt = <1800000>;
469                                         regulator-max-microvolt = <3300000>;
470                                         regulator-always-on;
471                                         regulator-boot-on;
472                                 };
473
474                                 ldo2_reg: ldo2 {
475                                         /* VDD_RTCIO */
476                                         /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
477                                         regulator-name = "ldo2";
478                                         regulator-min-microvolt = <3300000>;
479                                         regulator-max-microvolt = <3300000>;
480                                         regulator-always-on;
481                                         regulator-boot-on;
482                                 };
483
484                                 ldo3_reg: ldo3 {
485                                         /* VDDA_1V8_PHY */
486                                         regulator-name = "ldo3";
487                                         regulator-min-microvolt = <1800000>;
488                                         regulator-max-microvolt = <1800000>;
489                                         regulator-always-on;
490                                         regulator-boot-on;
491                                 };
492
493                                 ldo9_reg: ldo9 {
494                                         /* VDD_RTC */
495                                         regulator-name = "ldo9";
496                                         regulator-min-microvolt = <1050000>;
497                                         regulator-max-microvolt = <1050000>;
498                                         regulator-always-on;
499                                         regulator-boot-on;
500                                         regulator-allow-bypass;
501                                 };
502
503                                 ldoln_reg: ldoln {
504                                         /* VDDA_1V8_PLL */
505                                         regulator-name = "ldoln";
506                                         regulator-min-microvolt = <1800000>;
507                                         regulator-max-microvolt = <1800000>;
508                                         regulator-always-on;
509                                         regulator-boot-on;
510                                 };
511
512                                 ldousb_reg: ldousb {
513                                         /* VDDA_3V_USB: VDDA_USBHS33 */
514                                         regulator-name = "ldousb";
515                                         regulator-min-microvolt = <3300000>;
516                                         regulator-max-microvolt = <3300000>;
517                                         regulator-boot-on;
518                                 };
519
520                                 /* REGEN1 is unused */
521
522                                 regen2: regen2 {
523                                         /* Needed for PMIC internal resources */
524                                         regulator-name = "regen2";
525                                         regulator-boot-on;
526                                         regulator-always-on;
527                                 };
528
529                                 /* REGEN3 is unused */
530
531                                 sysen1: sysen1 {
532                                         /* PMIC_REGEN_3V3 */
533                                         regulator-name = "sysen1";
534                                         regulator-boot-on;
535                                         regulator-always-on;
536                                 };
537
538                                 sysen2: sysen2 {
539                                         /* PMIC_REGEN_DDR */
540                                         regulator-name = "sysen2";
541                                         regulator-boot-on;
542                                         regulator-always-on;
543                                 };
544                         };
545                 };
546         };
547
548         pcf_lcd: gpio@20 {
549                 compatible = "ti,pcf8575", "nxp,pcf8575";
550                 reg = <0x20>;
551                 gpio-controller;
552                 #gpio-cells = <2>;
553                 interrupt-parent = <&gpio6>;
554                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
555                 interrupt-controller;
556                 #interrupt-cells = <2>;
557         };
558
559         pcf_gpio_21: gpio@21 {
560                 compatible = "ti,pcf8575", "nxp,pcf8575";
561                 reg = <0x21>;
562                 lines-initial-states = <0x1408>;
563                 gpio-controller;
564                 #gpio-cells = <2>;
565                 interrupt-parent = <&gpio6>;
566                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
567                 interrupt-controller;
568                 #interrupt-cells = <2>;
569                 u-boot,i2c-offset-len = <0>;
570         };
571
572         tlv320aic3106: tlv320aic3106@19 {
573                 #sound-dai-cells = <0>;
574                 compatible = "ti,tlv320aic3106";
575                 reg = <0x19>;
576                 adc-settle-ms = <40>;
577                 ai3x-micbias-vg = <1>;          /* 2.0V */
578                 status = "okay";
579
580                 /* Regulators */
581                 AVDD-supply = <&evm_3v3_sw>;
582                 IOVDD-supply = <&evm_3v3_sw>;
583                 DRVDD-supply = <&evm_3v3_sw>;
584                 DVDD-supply = <&aic_dvdd>;
585         };
586 };
587
588 &i2c2 {
589         status = "okay";
590         pinctrl-names = "default";
591         pinctrl-0 = <&i2c2_pins>;
592         clock-frequency = <400000>;
593
594         pcf_hdmi: gpio@26 {
595                 compatible = "ti,pcf8575", "nxp,pcf8575";
596                 reg = <0x26>;
597                 gpio-controller;
598                 #gpio-cells = <2>;
599                 p1 {
600                         /* vin6_sel_s0: high: VIN6, low: audio */
601                         gpio-hog;
602                         gpios = <1 GPIO_ACTIVE_HIGH>;
603                         output-low;
604                         line-name = "vin6_sel_s0";
605                 };
606         };
607 };
608
609 &i2c3 {
610         status = "okay";
611         pinctrl-names = "default";
612         pinctrl-0 = <&i2c3_pins>;
613         clock-frequency = <400000>;
614 };
615
616 &mcspi1 {
617         status = "okay";
618         pinctrl-names = "default";
619         pinctrl-0 = <&mcspi1_pins>;
620 };
621
622 &mcspi2 {
623         status = "okay";
624         pinctrl-names = "default";
625         pinctrl-0 = <&mcspi2_pins>;
626 };
627
628 &uart1 {
629         status = "okay";
630         pinctrl-names = "default";
631         pinctrl-0 = <&uart1_pins>;
632         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
633                               <&dra7_pmx_core 0x3e0>;
634 };
635
636 &uart2 {
637         status = "okay";
638         pinctrl-names = "default";
639         pinctrl-0 = <&uart2_pins>;
640 };
641
642 &uart3 {
643         status = "okay";
644         pinctrl-names = "default";
645         pinctrl-0 = <&uart3_pins>;
646 };
647
648 &mmc1 {
649         status = "okay";
650         vmmc-supply = <&evm_3v3_sd>;
651         vmmc_aux-supply = <&ldo1_reg>;
652         bus-width = <4>;
653         /*
654          * SDCD signal is not being used here - using the fact that GPIO mode
655          * is always hardwired.
656          */
657         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
658 };
659
660 &mmc2 {
661         status = "okay";
662         vmmc-supply = <&evm_3v3_sw>;
663         bus-width = <8>;
664 };
665
666 &cpu0 {
667         cpu0-supply = <&smps123_reg>;
668 };
669
670 &qspi {
671         status = "okay";
672
673         spi-max-frequency = <76800000>;
674         m25p80@0 {
675                 compatible = "s25fl256s1", "spi-flash";
676                 spi-max-frequency = <76800000>;
677                 reg = <0>;
678                 spi-tx-bus-width = <1>;
679                 spi-rx-bus-width = <4>;
680                 #address-cells = <1>;
681                 #size-cells = <1>;
682
683                 /* MTD partition table.
684                  * The ROM checks the first four physical blocks
685                  * for a valid file to boot and the flash here is
686                  * 64KiB block size.
687                  */
688                 partition@0 {
689                         label = "QSPI.SPL";
690                         reg = <0x00000000 0x000010000>;
691                 };
692                 partition@1 {
693                         label = "QSPI.SPL.backup1";
694                         reg = <0x00010000 0x00010000>;
695                 };
696                 partition@2 {
697                         label = "QSPI.SPL.backup2";
698                         reg = <0x00020000 0x00010000>;
699                 };
700                 partition@3 {
701                         label = "QSPI.SPL.backup3";
702                         reg = <0x00030000 0x00010000>;
703                 };
704                 partition@4 {
705                         label = "QSPI.u-boot";
706                         reg = <0x00040000 0x00100000>;
707                 };
708                 partition@5 {
709                         label = "QSPI.u-boot-spl-os";
710                         reg = <0x00140000 0x00080000>;
711                 };
712                 partition@6 {
713                         label = "QSPI.u-boot-env";
714                         reg = <0x001c0000 0x00010000>;
715                 };
716                 partition@7 {
717                         label = "QSPI.u-boot-env.backup1";
718                         reg = <0x001d0000 0x0010000>;
719                 };
720                 partition@8 {
721                         label = "QSPI.kernel";
722                         reg = <0x001e0000 0x0800000>;
723                 };
724                 partition@9 {
725                         label = "QSPI.file-system";
726                         reg = <0x009e0000 0x01620000>;
727                 };
728         };
729 };
730
731 &omap_dwc3_1 {
732         extcon = <&extcon_usb1>;
733 };
734
735 &omap_dwc3_2 {
736         extcon = <&extcon_usb2>;
737 };
738
739 &usb1 {
740         dr_mode = "peripheral";
741         pinctrl-names = "default";
742         pinctrl-0 = <&usb1_pins>;
743 };
744
745 &usb2 {
746         dr_mode = "host";
747         pinctrl-names = "default";
748         pinctrl-0 = <&usb2_pins>;
749 };
750
751 &elm {
752         status = "okay";
753 };
754
755 &gpmc {
756         status = "okay";
757         pinctrl-names = "default";
758         pinctrl-0 = <&nand_flash_x16>;
759         ranges = <0 0 0x08000000 0x01000000>;   /* minimum GPMC partition = 16MB */
760         nand@0,0 {
761                 compatible = "ti,omap2-nand";
762                 reg = <0 0 4>;          /* device IO registers */
763                 interrupt-parent = <&gpmc>;
764                 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
765                              <1 IRQ_TYPE_NONE>; /* termcount */
766                 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
767                 ti,nand-ecc-opt = "bch8";
768                 ti,elm-id = <&elm>;
769                 nand-bus-width = <16>;
770                 gpmc,device-width = <2>;
771                 gpmc,sync-clk-ps = <0>;
772                 gpmc,cs-on-ns = <0>;
773                 gpmc,cs-rd-off-ns = <80>;
774                 gpmc,cs-wr-off-ns = <80>;
775                 gpmc,adv-on-ns = <0>;
776                 gpmc,adv-rd-off-ns = <60>;
777                 gpmc,adv-wr-off-ns = <60>;
778                 gpmc,we-on-ns = <10>;
779                 gpmc,we-off-ns = <50>;
780                 gpmc,oe-on-ns = <4>;
781                 gpmc,oe-off-ns = <40>;
782                 gpmc,access-ns = <40>;
783                 gpmc,wr-access-ns = <80>;
784                 gpmc,rd-cycle-ns = <80>;
785                 gpmc,wr-cycle-ns = <80>;
786                 gpmc,bus-turnaround-ns = <0>;
787                 gpmc,cycle2cycle-delay-ns = <0>;
788                 gpmc,clk-activation-ns = <0>;
789                 gpmc,wr-data-mux-bus-ns = <0>;
790                 /* MTD partition table */
791                 /* All SPL-* partitions are sized to minimal length
792                  * which can be independently programmable. For
793                  * NAND flash this is equal to size of erase-block */
794                 #address-cells = <1>;
795                 #size-cells = <1>;
796                 partition@0 {
797                         label = "NAND.SPL";
798                         reg = <0x00000000 0x000020000>;
799                 };
800                 partition@1 {
801                         label = "NAND.SPL.backup1";
802                         reg = <0x00020000 0x00020000>;
803                 };
804                 partition@2 {
805                         label = "NAND.SPL.backup2";
806                         reg = <0x00040000 0x00020000>;
807                 };
808                 partition@3 {
809                         label = "NAND.SPL.backup3";
810                         reg = <0x00060000 0x00020000>;
811                 };
812                 partition@4 {
813                         label = "NAND.u-boot-spl-os";
814                         reg = <0x00080000 0x00040000>;
815                 };
816                 partition@5 {
817                         label = "NAND.u-boot";
818                         reg = <0x000c0000 0x00100000>;
819                 };
820                 partition@6 {
821                         label = "NAND.u-boot-env";
822                         reg = <0x001c0000 0x00020000>;
823                 };
824                 partition@7 {
825                         label = "NAND.u-boot-env.backup1";
826                         reg = <0x001e0000 0x00020000>;
827                 };
828                 partition@8 {
829                         label = "NAND.kernel";
830                         reg = <0x00200000 0x00800000>;
831                 };
832                 partition@9 {
833                         label = "NAND.file-system";
834                         reg = <0x00a00000 0x0f600000>;
835                 };
836         };
837 };
838
839 &usb2_phy1 {
840         phy-supply = <&ldousb_reg>;
841 };
842
843 &usb2_phy2 {
844         phy-supply = <&ldousb_reg>;
845 };
846
847 &gpio7 {
848         ti,no-reset-on-init;
849         ti,no-idle-on-init;
850 };
851
852 &mac {
853         status = "okay";
854         pinctrl-names = "default", "sleep";
855         pinctrl-0 = <&cpsw_default>;
856         pinctrl-1 = <&cpsw_sleep>;
857         dual_emac;
858 };
859
860 &cpsw_emac0 {
861         phy_id = <&davinci_mdio>, <2>;
862         phy-mode = "rgmii";
863         dual_emac_res_vlan = <1>;
864 };
865
866 &cpsw_emac1 {
867         phy_id = <&davinci_mdio>, <3>;
868         phy-mode = "rgmii";
869         dual_emac_res_vlan = <2>;
870 };
871
872 &davinci_mdio {
873         pinctrl-names = "default", "sleep";
874         pinctrl-0 = <&davinci_mdio_default>;
875         pinctrl-1 = <&davinci_mdio_sleep>;
876 };
877
878 &dcan1 {
879         status = "ok";
880         pinctrl-names = "default", "sleep", "active";
881         pinctrl-0 = <&dcan1_pins_sleep>;
882         pinctrl-1 = <&dcan1_pins_sleep>;
883         pinctrl-2 = <&dcan1_pins_default>;
884 };
885
886 &atl {
887         pinctrl-names = "default";
888         pinctrl-0 = <&atl_pins>;
889
890         assigned-clocks = <&abe_dpll_sys_clk_mux>,
891                           <&atl_gfclk_mux>,
892                           <&dpll_abe_ck>,
893                           <&dpll_abe_m2x2_ck>,
894                           <&atl_clkin2_ck>;
895         assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
896         assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
897
898         status = "okay";
899
900         atl2 {
901                 bws = <DRA7_ATL_WS_MCASP2_FSX>;
902                 aws = <DRA7_ATL_WS_MCASP3_FSX>;
903         };
904 };
905
906 &mcasp3 {
907         #sound-dai-cells = <0>;
908         pinctrl-names = "default", "sleep";
909         pinctrl-0 = <&mcasp3_pins>;
910         pinctrl-1 = <&mcasp3_sleep_pins>;
911
912         assigned-clocks = <&mcasp3_ahclkx_mux>;
913         assigned-clock-parents = <&atl_clkin2_ck>;
914
915         status = "okay";
916
917         op-mode = <0>;          /* MCASP_IIS_MODE */
918         tdm-slots = <2>;
919         /* 4 serializer */
920         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
921                 1 2 0 0
922         >;
923         tx-num-evt = <32>;
924         rx-num-evt = <32>;
925 };
926
927 &mailbox5 {
928         status = "okay";
929         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
930                 status = "okay";
931         };
932         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
933                 status = "okay";
934         };
935 };
936
937 &mailbox6 {
938         status = "okay";
939         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
940                 status = "okay";
941         };
942         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
943                 status = "okay";
944         };
945 };