]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/exynos4210-trats.dts
ARM: dts: exynos4: change the nodes relevant to mmc/sd
[u-boot] / arch / arm / dts / exynos4210-trats.dts
1 /*
2  * Samsung's Exynos4210 based Trats board device tree source
3  *
4  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 /dts-v1/;
11 #include "exynos4210.dtsi"
12
13 / {
14         model = "Samsung Trats based on Exynos4210";
15         compatible = "samsung,trats", "samsung,exynos4210";
16
17         config {
18                 samsung,dsim-device-name = "s6e8ax0";
19         };
20
21         aliases {
22                 serial0 = "/serial@13800000";
23                 console = "/serial@13820000";
24                 i2c8 = &i2c_fg;
25         };
26
27         fimd@11c00000 {
28                 compatible = "samsung,exynos-fimd";
29                 reg = <0x11c00000 0xa4>;
30
31                 samsung,vl-freq = <60>;
32                 samsung,vl-col = <720>;
33                 samsung,vl-row = <1280>;
34                 samsung,vl-width = <720>;
35                 samsung,vl-height = <1280>;
36
37                 samsung,vl-clkp = <0>;
38                 samsung,vl-oep = <0>;
39                 samsung,vl-hsp = <1>;
40                 samsung,vl-vsp = <1>;
41                 samsung,vl-dp = <1>;
42                 samsung,vl-bpix = <4>;
43
44                 samsung,vl-hspw = <5>;
45                 samsung,vl-hbpd = <10>;
46                 samsung,vl-hfpd = <10>;
47                 samsung,vl-vspw = <2>;
48                 samsung,vl-vbpd = <1>;
49                 samsung,vl-vfpd = <13>;
50                 samsung,vl-cmd-allow-len = <0xf>;
51
52                 samsung,winid = <3>;
53                 samsung,power-on-delay = <30>;
54                 samsung,interface-mode = <1>;
55                 samsung,mipi-enabled = <1>;
56                 samsung,dp-enabled;
57                 samsung,dual-lcd-enabled;
58
59                 samsung,logo-on = <1>;
60                 samsung,resolution = <0>;
61                 samsung,rgb-mode = <0>;
62         };
63
64         mipidsi@11c80000 {
65                 compatible = "samsung,exynos-mipi-dsi";
66                 reg = <0x11c80000 0x5c>;
67
68                 samsung,dsim-config-e-interface = <1>;
69                 samsung,dsim-config-e-virtual-ch = <0>;
70                 samsung,dsim-config-e-pixel-format = <7>;
71                 samsung,dsim-config-e-burst-mode = <1>;
72                 samsung,dsim-config-e-no-data-lane = <3>;
73                 samsung,dsim-config-e-byte-clk = <0>;
74                 samsung,dsim-config-hfp = <1>;
75
76                 samsung,dsim-config-p = <3>;
77                 samsung,dsim-config-m = <120>;
78                 samsung,dsim-config-s = <1>;
79
80                 samsung,dsim-config-pll-stable-time = <500>;
81                 samsung,dsim-config-esc-clk = <20000000>;
82                 samsung,dsim-config-stop-holding-cnt = <0x7ff>;
83                 samsung,dsim-config-bta-timeout = <0xff>;
84                 samsung,dsim-config-rx-timeout = <0xffff>;
85
86                 samsung,dsim-device-id = <0xffffffff>;
87                 samsung,dsim-device-bus-id = <0>;
88
89                 samsung,dsim-device-reverse-panel = <1>;
90         };
91
92         i2c_fg: fuel-gauge {
93                 compatible = "i2c-gpio";
94                 gpios = <&gpy4 1 0>,    /* sda */
95                         <&gpy4 0 0>;    /* scl */
96                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
97                 status = "okay";
98         };
99 };
100
101 &i2c_5 {
102         clock-frequency = <100000>;
103         status = "okay";
104
105         max8997-pmic@66 {
106                 compatible = "maxim,max8997";
107                 reg = <0x66 0 0>;
108                 voltage-regulators {
109                         valive_reg: LDO2 {
110                              regulator-name = "VALIVE_1.1V_C210";
111                              regulator-min-microvolt = <1100000>;
112                              regulator-max-microvolt = <1100000>;
113                              regulator-always-on;
114                         };
115
116                         vusb_reg: LDO3 {
117                              regulator-name = "VUSB_1.1V_C210";
118                              regulator-min-microvolt = <1100000>;
119                              regulator-max-microvolt = <1100000>;
120                         };
121
122                         vmipi_reg: LDO4 {
123                              regulator-name = "VMIPI_1.8V";
124                              regulator-min-microvolt = <1800000>;
125                              regulator-max-microvolt = <1800000>;
126                         };
127
128                         vpda_reg: LDO6 {
129                              regulator-name = "VCC_1.8V_PDA";
130                              regulator-min-microvolt = <1800000>;
131                              regulator-max-microvolt = <1800000>;
132                              regulator-always-on;
133                         };
134
135                         vcam_reg: LDO7 {
136                              regulator-name = "CAM_ISP_1.8V";
137                              regulator-min-microvolt = <1800000>;
138                              regulator-max-microvolt = <1800000>;
139                         };
140
141                         vusbdac_reg: LDO8 {
142                              regulator-name = "VUSB+VDAC_3.3V_C210";
143                              regulator-min-microvolt = <3300000>;
144                              regulator-max-microvolt = <3300000>;
145                         };
146
147                         vccpda_reg: LDO9 {
148                              regulator-name = "VCC_2.8V_PDA";
149                              regulator-min-microvolt = <2800000>;
150                              regulator-max-microvolt = <2800000>;
151                              regulator-always-on;
152                         };
153
154                         vpll_reg: LDO10 {
155                              regulator-name = "VPLL_1.1V_C210";
156                              regulator-min-microvolt = <1100000>;
157                              regulator-max-microvolt = <1100000>;
158                              regulator-always-on;
159                         };
160
161                         vtcam_reg: LDO12 {
162                              regulator-name = "VT_CAM_1.8V";
163                              regulator-min-microvolt = <1800000>;
164                              regulator-max-microvolt = <1800000>;
165                         };
166
167                         vcclcd_reg: LDO13 {
168                              regulator-name = "VCC_3.3V_LCD";
169                              regulator-min-microvolt = <3300000>;
170                              regulator-max-microvolt = <3300000>;
171                         };
172
173                         vlcd_reg: LDO15 {
174                              regulator-name = "VLCD_2.2V";
175                              regulator-min-microvolt = <2200000>;
176                              regulator-max-microvolt = <2200000>;
177                         };
178
179                         camsensor_reg: LDO16 {
180                              regulator-name = "CAM_SENSOR_IO_1.8V";
181                              regulator-min-microvolt = <1800000>;
182                              regulator-max-microvolt = <1800000>;
183                         };
184
185                         vddq_reg: LDO21 {
186                              regulator-name = "VDDQ_M1M2_1.2V";
187                              regulator-min-microvolt = <1200000>;
188                              regulator-max-microvolt = <1200000>;
189                              regulator-always-on;
190                         };
191
192                         varm_breg: BUCK1 {
193                              /*
194                               * HACK: The real name is VARM_1.2V_C210,
195                               * but exynos-cpufreq does not support
196                               * DT-based regulator lookup yet.
197                               */
198                              regulator-name = "vdd_arm";
199                              regulator-min-microvolt = <900000>;
200                              regulator-max-microvolt = <1350000>;
201                              regulator-always-on;
202                         };
203
204                         vint_breg: BUCK2 {
205                              regulator-name = "VINT_1.1V_C210";
206                              regulator-min-microvolt = <900000>;
207                              regulator-max-microvolt = <1100000>;
208                              regulator-always-on;
209                         };
210
211                         camisp_breg: BUCK4 {
212                              regulator-name = "CAM_ISP_CORE_1.2V";
213                              regulator-min-microvolt = <1200000>;
214                              regulator-max-microvolt = <1200000>;
215                         };
216
217                         vmem_breg: BUCK5 {
218                              regulator-name = "VMEM_1.2V_C210";
219                              regulator-min-microvolt = <1200000>;
220                              regulator-max-microvolt = <1200000>;
221                              regulator-always-on;
222                         };
223
224                         vccsub_breg: BUCK7 {
225                              regulator-name = "VCC_SUB_2.0V";
226                              regulator-min-microvolt = <2000000>;
227                              regulator-max-microvolt = <2000000>;
228                              regulator-always-on;
229                         };
230
231                         safe1_sreg: ESAFEOUT1 {
232                              regulator-name = "SAFEOUT1";
233                         };
234
235                         safe2_sreg: ESAFEOUT2 {
236                              regulator-name = "SAFEOUT2";
237                              regulator-boot-on;
238                         };
239                 };
240         };
241 };
242
243 &sdhci0 {
244         samsung,bus-width = <8>;
245         samsung,timing = <1 3 3>;
246         pwr-gpios = <&gpk0 2 0>;
247         status = "okay";
248 };
249
250 &sdhci2 {
251         samsung,bus-width = <4>;
252         samsung,timing = <1 2 3>;
253         cd-gpios = <&gpx3 4 0>;
254         status = "okay";
255 };