2 * Samsung's Exynos4210 based Universal C210 board device tree source
4 * Copyright (c) 2014 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
7 * SPDX-License-Identifier: GPL-2.0+
11 #include "exynos4210.dtsi"
14 model = "Samsung Universal C210 based on Exynos4210 rev0";
15 compatible = "samsung,universal_c210", "samsung,exynos4210";
18 serial0 = "/serial@13800000";
19 console = "/serial@13820000";
20 mmc0 = "/sdhci@12510000";
21 mmc2 = "/sdhci@12530000";
25 samsung,bus-width = <8>;
26 samsung,timing = <1 3 3>;
27 pwr-gpios = <&gpk0 2 0>;
35 samsung,bus-width = <4>;
36 samsung,timing = <1 2 3>;
37 cd-gpios = <&gpx3 4 0>;
45 compatible = "spi-gpio";
46 cs-gpios = <&gpy4 3 0>;
47 gpio-sck = <&gpy3 1 0>;
48 gpio-mosi = <&gpy3 3 0>;
49 gpio-miso = <&gpy3 0 0>;
58 compatible = "samsung,exynos-fimd";
59 reg = <0x11c00000 0xa4>;
61 samsung,vl-freq = <60>;
62 samsung,vl-col = <480>;
63 samsung,vl-row = <800>;
64 samsung,vl-width = <480>;
65 samsung,vl-height = <800>;
67 samsung,vl-clkp = <0>;
72 samsung,vl-bpix = <4>;
74 samsung,vl-hspw = <2>;
75 samsung,vl-hbpd = <16>;
76 samsung,vl-hfpd = <16>;
77 samsung,vl-vspw = <2>;
78 samsung,vl-vbpd = <8>;
79 samsung,vl-vfpd = <8>;
80 samsung,vl-cmd-allow-len = <0xf>;
82 samsung,pclk_name = <1>;
83 samsung,sclk_div = <1>;
86 samsung,power-on-delay = <10000>;
87 samsung,interface-mode = <1>;
88 samsung,mipi-enabled = <0>;
90 samsung,dual-lcd-enabled;
92 samsung,logo-on = <1>;
93 samsung,resolution = <0>;
94 samsung,rgb-mode = <0>;
99 clock-frequency = <100000>;
103 compatible = "maxim,max8998";
107 regulator-name = "VALIVE_1.2V";
108 regulator-min-microvolt = <1200000>;
109 regulator-max-microvolt = <1200000>;
114 regulator-name = "VUSB+MIPI_1.1V";
115 regulator-min-microvolt = <1100000>;
116 regulator-max-microvolt = <1100000>;
121 regulator-name = "VADC_3.3V";
122 regulator-min-microvolt = <3300000>;
123 regulator-max-microvolt = <3300000>;
127 regulator-name = "VTF_2.8V";
128 regulator-min-microvolt = <2800000>;
129 regulator-max-microvolt = <2800000>;
133 regulator-name = "LDO6";
134 regulator-min-microvolt = <2000000>;
135 regulator-max-microvolt = <2000000>;
139 regulator-name = "VLCD+VMIPI_1.8V";
140 regulator-min-microvolt = <1800000>;
141 regulator-max-microvolt = <1800000>;
145 regulator-name = "VUSB+VDAC_3.3V";
146 regulator-min-microvolt = <3300000>;
147 regulator-max-microvolt = <3300000>;
152 regulator-name = "VCC_2.8V";
153 regulator-min-microvolt = <2800000>;
154 regulator-max-microvolt = <2800000>;
159 regulator-name = "VPLL_1.1V";
160 regulator-min-microvolt = <1100000>;
161 regulator-max-microvolt = <1100000>;
167 regulator-name = "CAM_AF_3.3V";
168 regulator-min-microvolt = <3300000>;
169 regulator-max-microvolt = <3300000>;
173 regulator-name = "PS_2.8V";
174 regulator-min-microvolt = <2800000>;
175 regulator-max-microvolt = <2800000>;
179 regulator-name = "VHIC_1.2V";
180 regulator-min-microvolt = <1200000>;
181 regulator-max-microvolt = <1200000>;
185 regulator-name = "CAM_I_HOST_1.8V";
186 regulator-min-microvolt = <1800000>;
187 regulator-max-microvolt = <1800000>;
191 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
192 regulator-min-microvolt = <1200000>;
193 regulator-max-microvolt = <1200000>;
197 regulator-name = "CAM_S_ANA_2.8V";
198 regulator-min-microvolt = <2800000>;
199 regulator-max-microvolt = <2800000>;
203 regulator-name = "VCC_3.0V_LCD";
204 regulator-min-microvolt = <3000000>;
205 regulator-max-microvolt = <3000000>;
209 regulator-name = "VINT_1.1V";
210 regulator-min-microvolt = <750000>;
211 regulator-max-microvolt = <1500000>;
217 regulator-name = "VG3D_1.1V";
218 regulator-min-microvolt = <750000>;
219 regulator-max-microvolt = <1500000>;
224 regulator-name = "VCC_1.8V";
225 regulator-min-microvolt = <1800000>;
226 regulator-max-microvolt = <1800000>;
231 regulator-name = "VMEM_1.2V";
232 regulator-min-microvolt = <1200000>;
233 regulator-max-microvolt = <1200000>;
237 ap32khz_reg: EN32KHz-AP {
238 regulator-name = "32KHz AP";
242 cp32khz_reg: EN32KHz-CP {
243 regulator-name = "32KHz CP";
247 regulator-name = "VICHG";
250 safeout1_reg: ESAFEOUT1 {
251 regulator-name = "SAFEOUT1";
254 safeout2_reg: ESAFEOUT2 {
255 regulator-name = "SAFEOUT2";