]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/exynos5250-snow.dts
ARM64: zynqmp: Add missing mmc aliases
[u-boot] / arch / arm / dts / exynos5250-snow.dts
1 /*
2  * SAMSUNG Snow board device tree source
3  *
4  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
5  *              http://www.samsung.com
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/input/input.h>
16 #include "exynos5250.dtsi"
17
18 / {
19         model = "Google Snow";
20         compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
21
22         aliases {
23                 i2c0 = "/i2c@12C60000";
24                 i2c1 = "/i2c@12C70000";
25                 i2c2 = "/i2c@12C80000";
26                 i2c3 = "/i2c@12C90000";
27                 i2c4 = "/i2c@12CA0000";
28                 i2c104 = &i2c_104;
29                 i2c5 = "/i2c@12CB0000";
30                 i2c6 = "/i2c@12CC0000";
31                 i2c7 = "/i2c@12CD0000";
32                 spi0 = "/spi@12d20000";
33                 spi1 = "/spi@12d30000";
34                 spi2 = "/spi@12d40000";
35                 spi3 = "/spi@131a0000";
36                 spi4 = "/spi@131b0000";
37                 mmc0 = "/mmc@12200000";
38                 mmc1 = "/mmc@12210000";
39                 mmc2 = "/mmc@12220000";
40                 mmc3 = "/mmc@12230000";
41                 serial0 = "/serial@12C30000";
42                 console = "/serial@12C30000";
43                 i2s = "/sound@3830000";
44         };
45
46         memory {
47                 reg = <0x40000000 0x80000000>;
48         };
49
50         chosen {
51                 bootargs = "console=tty1";
52                 stdout-path = "serial3:115200n8";
53         };
54
55         iram {
56                 reg = <0x02020000 0x60000>;
57         };
58
59         config {
60                 samsung,bl1-offset = <0x1400>;
61                 samsung,bl2-offset = <0x3400>;
62                 u-boot-memory = "/memory";
63                 u-boot-offset = <0x3e00000 0x100000>;
64         };
65
66         flash {
67                 reg = <0 0x100000>;
68                 #address-cells = <1>;
69                 #size-cells = <1>;
70                 pre-boot {
71                         label = "bl1 pre-boot";
72                         reg = <0 0x2000>;
73                         read-only;
74                         filename = "e5250.nbl1.bin";
75                         type = "blob exynos-bl1";
76                         required;
77                 };
78
79                 spl {
80                         label = "bl2 spl";
81                         reg = <0x2000 0x4000>;
82                         read-only;
83                         filename = "bl2.bin";
84                         type = "blob exynos-bl2 boot,dtb";
85                         payload = "/flash/ro-boot";
86                         required;
87                 };
88
89                 ro-boot {
90                         label = "u-boot";
91                         reg = <0x6000 0x9a000>;
92                         read-only;
93                         type = "blob boot,dtb";
94                         required;
95                 };
96         };
97
98         i2c-arbitrator {
99                 compatible = "i2c-arb-gpio-challenge";
100                 #address-cells = <1>;
101                 #size-cells = <0>;
102
103                 i2c-parent = <&{/i2c@12CA0000}>;
104
105                 our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
106                 their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
107                 slew-delay-us = <10>;
108                 wait-retry-us = <3000>;
109                 wait-free-us = <50000>;
110
111                 /* Use ID 104 as a hint that we're on physical bus 4 */
112                 i2c_104: i2c@0 {
113                         reg = <0>;
114                         #address-cells = <1>;
115                         #size-cells = <0>;
116
117                         battery: sbs-battery@b {
118                                 compatible = "sbs,sbs-battery";
119                                 reg = <0xb>;
120                                 sbs,poll-retry-count = <1>;
121                         };
122
123                         cros_ec: embedded-controller {
124                                 compatible = "google,cros-ec-i2c";
125                                 reg = <0x1e>;
126                                 interrupts = <6 IRQ_TYPE_NONE>;
127                                 interrupt-parent = <&gpx1>;
128                                 wakeup-source;
129                                 i2c-max-frequency = <100000>;
130                                 u-boot,i2c-offset-len = <0>;
131                                 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
132                         };
133
134                         power-regulator {
135                                 compatible = "ti,tps65090";
136                                 reg = <0x48>;
137
138                                 regulators {
139                                         dcdc1 {
140                                                 ti,enable-ext-control;
141                                         };
142                                         dcdc2 {
143                                                 ti,enable-ext-control;
144                                         };
145                                         dcdc3 {
146                                                 ti,enable-ext-control;
147                                         };
148                                         fet1: fet1 {
149                                                 regulator-name = "vcd_led";
150                                                 ti,overcurrent-wait = <3>;
151                                         };
152                                         tps65090_fet2: fet2 {
153                                                 regulator-name = "video_mid";
154                                                 regulator-always-on;
155                                                 ti,overcurrent-wait = <3>;
156                                         };
157                                         fet3 {
158                                                 regulator-name = "wwan_r";
159                                                 regulator-always-on;
160                                                 ti,overcurrent-wait = <3>;
161                                         };
162                                         fet4 {
163                                                 regulator-name = "sdcard";
164                                                 ti,overcurrent-wait = <3>;
165                                         };
166                                         fet5 {
167                                                 regulator-name = "camout";
168                                                 regulator-always-on;
169                                                 ti,overcurrent-wait = <3>;
170                                         };
171                                         fet6: fet6 {
172                                                 regulator-name = "lcd_vdd";
173                                                 ti,overcurrent-wait = <3>;
174                                         };
175                                         tps65090_fet7: fet7 {
176                                                 regulator-name = "video_mid_1a";
177                                                 regulator-always-on;
178                                                 ti,overcurrent-wait = <3>;
179                                         };
180                                         ldo1 {
181                                         };
182                                         ldo2 {
183                                         };
184                                 };
185
186                                 charger {
187                                         compatible = "ti,tps65090-charger";
188                                 };
189                         };
190                 };
191         };
192
193         i2c@12CD0000 {
194                 ptn3460: lvds-bridge@20 {
195                         compatible = "nxp,ptn3460";
196                         reg = <0x20>;
197                         sleep-gpios = <&gpy2 5 GPIO_ACTIVE_LOW>;
198                         reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
199                         hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
200                         edid-emulation = <5>;
201                 };
202
203                 soundcodec@22 {
204                         reg = <0x22>;
205                         compatible = "maxim,max98095-codec";
206                 };
207         };
208
209         i2c@12C90000 {
210                 clock-frequency = <100000>;
211                 tpm@20 {
212                         reg = <0x20>;
213                         u-boot,i2c-offset-len = <0>;
214                         compatible = "infineon,slb9635tt";
215                 };
216         };
217
218         spi@12d30000 {
219                 spi-max-frequency = <50000000>;
220                 firmware_storage_spi: flash@0 {
221                         compatible = "spi-flash";
222                         reg = <0>;
223                 };
224         };
225
226         spi@131b0000 {
227                 spi-max-frequency = <1000000>;
228                 spi-deactivate-delay = <100>;
229
230                 /* Snow did support SPI but the released version used I2C */
231                 embedded-controller {
232                         compatible = "google,cros-ec-i2c";
233                         reg = <0x1e>;
234                         spi-max-frequency = <5000000>;
235                         ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
236                         optimise-flash-write;
237                         status = "disabled";
238                 };
239         };
240
241         sound@3830000 {
242                 samsung,codec-type = "max98095";
243                 codec-enable-gpio = <&gpx1 7 GPIO_ACTIVE_HIGH>;
244         };
245
246         sound@12d60000 {
247                 status = "disabled";
248         };
249
250         i2c@12C60000 {
251                 max77686@09 {
252                         reg = <0x9>;
253                         compatible = "maxim,max77686";
254                 };
255         };
256
257         mmc@12200000 {
258                 samsung,bus-width = <8>;
259                 samsung,timing = <1 3 3>;
260                 samsung,removable = <0>;
261         };
262
263         mmc@12210000 {
264                 status = "disabled";
265         };
266
267         mmc@12220000 {
268                 samsung,bus-width = <4>;
269                 samsung,timing = <1 2 3>;
270                 samsung,removable = <1>;
271         };
272
273         mmc@12230000 {
274                 status = "disabled";
275         };
276
277         ehci@12110000 {
278                 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
279                 status = "okay";
280         };
281
282         xhci@12000000 {
283                 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
284         };
285
286         tmu@10060000 {
287                 samsung,min-temp        = <25>;
288                 samsung,max-temp        = <125>;
289                 samsung,start-warning   = <95>;
290                 samsung,start-tripping  = <105>;
291                 samsung,hw-tripping     = <110>;
292                 samsung,efuse-min-value = <40>;
293                 samsung,efuse-value     = <55>;
294                 samsung,efuse-max-value = <100>;
295                 samsung,slope           = <274761730>;
296                 samsung,dc-value        = <25>;
297         };
298
299         fimd@14400000 {
300                 samsung,vl-freq = <60>;
301                 samsung,vl-col = <1366>;
302                 samsung,vl-row = <768>;
303                 samsung,vl-width = <1366>;
304                 samsung,vl-height = <768>;
305
306                 samsung,vl-clkp;
307                 samsung,vl-dp;
308                 samsung,vl-hsp;
309                 samsung,vl-vsp;
310
311                 samsung,vl-bpix = <4>;
312
313                 samsung,vl-hspw = <32>;
314                 samsung,vl-hbpd = <80>;
315                 samsung,vl-hfpd = <48>;
316                 samsung,vl-vspw = <5>;
317                 samsung,vl-vbpd = <14>;
318                 samsung,vl-vfpd = <3>;
319                 samsung,vl-cmd-allow-len = <0xf>;
320
321                 samsung,winid = <0>;
322                 samsung,interface-mode = <1>;
323                 samsung,dp-enabled = <1>;
324                 samsung,dual-lcd-enabled = <0>;
325         };
326
327         dp@145b0000 {
328                 samsung,lt-status = <0>;
329
330                 samsung,master-mode = <0>;
331                 samsung,bist-mode = <0>;
332                 samsung,bist-pattern = <0>;
333                 samsung,h-sync-polarity = <0>;
334                 samsung,v-sync-polarity = <0>;
335                 samsung,interlaced = <0>;
336                 samsung,color-space = <0>;
337                 samsung,dynamic-range = <0>;
338                 samsung,ycbcr-coeff = <0>;
339                 samsung,color-depth = <1>;
340         };
341
342 };
343
344 &i2c_0 {
345         status = "okay";
346         samsung,i2c-sda-delay = <100>;
347         samsung,i2c-max-bus-freq = <378000>;
348
349         max77686: max77686@09 {
350                 compatible = "maxim,max77686";
351                 interrupt-parent = <&gpx3>;
352                 interrupts = <2 IRQ_TYPE_NONE>;
353                 wakeup-source;
354                 reg = <0x09>;
355                 #clock-cells = <1>;
356
357                 voltage-regulators {
358                         ldo1_reg: LDO1 {
359                                 regulator-name = "P1.0V_LDO_OUT1";
360                                 regulator-min-microvolt = <1000000>;
361                                 regulator-max-microvolt = <1000000>;
362                                 regulator-always-on;
363                         };
364
365                         ldo2_reg: LDO2 {
366                                 regulator-name = "P1.8V_LDO_OUT2";
367                                 regulator-min-microvolt = <1800000>;
368                                 regulator-max-microvolt = <1800000>;
369                                 regulator-always-on;
370                         };
371
372                         ldo3_reg: LDO3 {
373                                 regulator-name = "P1.8V_LDO_OUT3";
374                                 regulator-min-microvolt = <1800000>;
375                                 regulator-max-microvolt = <1800000>;
376                                 regulator-always-on;
377                         };
378
379                         ldo7_reg: LDO7 {
380                                 regulator-name = "P1.1V_LDO_OUT7";
381                                 regulator-min-microvolt = <1100000>;
382                                 regulator-max-microvolt = <1100000>;
383                                 regulator-always-on;
384                         };
385
386                         ldo8_reg: LDO8 {
387                                 regulator-name = "P1.0V_LDO_OUT8";
388                                 regulator-min-microvolt = <1000000>;
389                                 regulator-max-microvolt = <1000000>;
390                                 regulator-always-on;
391                         };
392
393                         ldo10_reg: LDO10 {
394                                 regulator-name = "P1.8V_LDO_OUT10";
395                                 regulator-min-microvolt = <1800000>;
396                                 regulator-max-microvolt = <1800000>;
397                                 regulator-always-on;
398                         };
399
400                         ldo12_reg: LDO12 {
401                                 regulator-name = "P3.0V_LDO_OUT12";
402                                 regulator-min-microvolt = <3000000>;
403                                 regulator-max-microvolt = <3000000>;
404                                 regulator-always-on;
405                         };
406
407                         ldo14_reg: LDO14 {
408                                 regulator-name = "P1.8V_LDO_OUT14";
409                                 regulator-min-microvolt = <1800000>;
410                                 regulator-max-microvolt = <1800000>;
411                                 regulator-always-on;
412                         };
413
414                         ldo15_reg: LDO15 {
415                                 regulator-name = "P1.0V_LDO_OUT15";
416                                 regulator-min-microvolt = <1000000>;
417                                 regulator-max-microvolt = <1000000>;
418                                 regulator-always-on;
419                         };
420
421                         ldo16_reg: LDO16 {
422                                 regulator-name = "P1.8V_LDO_OUT16";
423                                 regulator-min-microvolt = <1800000>;
424                                 regulator-max-microvolt = <1800000>;
425                                 regulator-always-on;
426                         };
427
428                         ldo17_reg: LDO17 {
429                                 regulator-name = "vdd_mydp";
430                                 regulator-min-microvolt = <1200000>;
431                                 regulator-max-microvolt = <1200000>;
432                         };
433
434                         buck1_reg: BUCK1 {
435                                 regulator-name = "vdd_mif";
436                                 regulator-min-microvolt = <950000>;
437                                 regulator-max-microvolt = <1300000>;
438                                 regulator-always-on;
439                                 regulator-boot-on;
440                         };
441
442                         buck2_reg: BUCK2 {
443                                 regulator-name = "vdd_arm";
444                                 regulator-min-microvolt = <850000>;
445                                 regulator-max-microvolt = <1350000>;
446                                 regulator-always-on;
447                                 regulator-boot-on;
448                         };
449
450                         buck3_reg: BUCK3 {
451                                 regulator-name = "vdd_int";
452                                 regulator-min-microvolt = <900000>;
453                                 regulator-max-microvolt = <1200000>;
454                                 regulator-always-on;
455                                 regulator-boot-on;
456                         };
457
458                         buck4_reg: BUCK4 {
459                                 regulator-name = "vdd_g3d";
460                                 regulator-min-microvolt = <850000>;
461                                 regulator-max-microvolt = <1300000>;
462                                 regulator-always-on;
463                                 regulator-boot-on;
464                         };
465
466                         buck5_reg: BUCK5 {
467                                 regulator-name = "P1.8V_BUCK_OUT5";
468                                 regulator-min-microvolt = <1800000>;
469                                 regulator-max-microvolt = <1800000>;
470                                 regulator-always-on;
471                                 regulator-boot-on;
472                         };
473
474                         buck6_reg: BUCK6 {
475                                 regulator-name = "P1.35V_BUCK_OUT6";
476                                 regulator-min-microvolt = <1350000>;
477                                 regulator-max-microvolt = <1350000>;
478                                 regulator-always-on;
479                         };
480
481                         buck7_reg: BUCK7 {
482                                 regulator-name = "P2.0V_BUCK_OUT7";
483                                 regulator-min-microvolt = <2000000>;
484                                 regulator-max-microvolt = <2000000>;
485                                 regulator-always-on;
486                         };
487
488                         buck8_reg: BUCK8 {
489                                 regulator-name = "P2.85V_BUCK_OUT8";
490                                 regulator-min-microvolt = <2850000>;
491                                 regulator-max-microvolt = <2850000>;
492                                 regulator-always-on;
493                         };
494                 };
495         };
496 };
497
498 #include "cros-ec-keyboard.dtsi"