]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/exynos5250-spring.dts
ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes
[u-boot] / arch / arm / dts / exynos5250-spring.dts
1 /*
2  * Google Spring board device tree source
3  *
4  * Copyright (c) 2013 Google, Inc
5  * Copyright (c) 2014 SUSE LINUX Products GmbH
6  *
7  * SPDX-License-Identifier:     GPL-2.0
8  */
9
10 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/interrupt-controller/irq.h>
13 #include <dt-bindings/input/input.h>
14 #include "exynos5250.dtsi"
15
16 / {
17         model = "Google Spring";
18         compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
19
20         aliases {
21                 i2c0 = "/i2c@12C60000";
22                 i2c1 = "/i2c@12C70000";
23                 i2c2 = "/i2c@12C80000";
24                 i2c3 = "/i2c@12C90000";
25                 i2c4 = "/i2c@12CA0000";
26                 i2c5 = "/i2c@12CB0000";
27                 i2c6 = "/i2c@12CC0000";
28                 i2c7 = "/i2c@12CD0000";
29                 i2c104 = &cros_ec_ldo_tunnel;
30                 spi0 = "/spi@12d20000";
31                 spi1 = "/spi@12d30000";
32                 spi2 = "/spi@12d40000";
33                 spi3 = "/spi@131a0000";
34                 spi4 = "/spi@131b0000";
35                 mmc0 = "/mmc@12000000";
36                 serial0 = "/serial@12C30000";
37                 console = "/serial@12C30000";
38                 i2s = "/sound@3830000";
39         };
40
41         memory {
42                 reg = <0x40000000 0x80000000>;
43         };
44
45         flash@0 {
46                 spl { /* spl size override */
47                         size = <0x8000>;
48                 };
49         };
50
51         chosen {
52                 bootargs = "console=tty1";
53                 stdout-path = "serial3:115200n8";
54         };
55
56         board-rev {
57                 compatible = "google,board-revision";
58                 google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
59                                          <&gpy4 2 0>;
60         };
61
62         i2c@12C90000 {
63                 clock-frequency = <100000>;
64                 tpm@20 {
65                         reg = <0x20>;
66                         compatible = "infineon,slb9645tt";
67                 };
68         };
69
70         mmc@12200000 {
71                 samsung,bus-width = <8>;
72                 samsung,timing = <1 3 3>;
73                 samsung,removable = <0>;
74         };
75
76         mmc@12210000 {
77                 status = "disabled";
78         };
79
80         mmc@12220000 {
81                 /* MMC2 pins are used as GPIO for eDP bridge */
82                 status = "disabled";
83         };
84
85         mmc@12230000 {
86                 status = "disabled";
87         };
88
89         ehci@12110000 {
90                 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
91                 status = "okay";
92         };
93
94         xhci@12000000 {
95                 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
96         };
97
98         spi@12d30000 {
99                 spi-max-frequency = <50000000>;
100                 firmware_storage_spi: flash@0 {
101                         compatible = "spi-flash";
102                         reg = <0>;
103                 };
104         };
105
106         tmu@10060000 {
107                 samsung,min-temp        = <25>;
108                 samsung,max-temp        = <125>;
109                 samsung,start-warning   = <95>;
110                 samsung,start-tripping  = <105>;
111                 samsung,hw-tripping     = <110>;
112                 samsung,efuse-min-value = <40>;
113                 samsung,efuse-value     = <55>;
114                 samsung,efuse-max-value = <100>;
115                 samsung,slope           = <274761730>;
116                 samsung,dc-value        = <25>;
117         };
118
119         fimd@14400000 {
120                 samsung,vl-freq = <60>;
121                 samsung,vl-col = <1366>;
122                 samsung,vl-row = <768>;
123                 samsung,vl-width = <1366>;
124                 samsung,vl-height = <768>;
125
126                 samsung,vl-clkp;
127                 samsung,vl-dp;
128                 samsung,vl-hsp;
129                 samsung,vl-vsp;
130
131                 samsung,vl-bpix = <4>;
132
133                 samsung,vl-hspw = <32>;
134                 samsung,vl-hbpd = <80>;
135                 samsung,vl-hfpd = <48>;
136                 samsung,vl-vspw = <5>;
137                 samsung,vl-vbpd = <14>;
138                 samsung,vl-vfpd = <3>;
139                 samsung,vl-cmd-allow-len = <0xf>;
140
141                 samsung,winid = <0>;
142                 samsung,interface-mode = <1>;
143                 samsung,dp-enabled = <1>;
144                 samsung,dual-lcd-enabled = <0>;
145         };
146
147         dp@145b0000 {
148                 samsung,lt-status = <0>;
149
150                 samsung,master-mode = <0>;
151                 samsung,bist-mode = <0>;
152                 samsung,bist-pattern = <0>;
153                 samsung,h-sync-polarity = <0>;
154                 samsung,v-sync-polarity = <0>;
155                 samsung,interlaced = <0>;
156                 samsung,color-space = <0>;
157                 samsung,dynamic-range = <0>;
158                 samsung,ycbcr-coeff = <0>;
159                 samsung,color-depth = <1>;
160         };
161 };
162
163 &i2c_0 {
164         status = "okay";
165         samsung,i2c-sda-delay = <100>;
166         samsung,i2c-max-bus-freq = <378000>;
167
168         s5m8767-pmic@66 {
169                 compatible = "samsung,s5m8767-pmic";
170                 reg = <0x66>;
171                 interrupt-parent = <&gpx3>;
172                 wakeup-source;
173
174                 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
175                                               <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
176                                               <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
177
178                 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
179                                              <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
180                                              <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
181
182                 /*
183                  * The following arrays of DVS voltages are not used, since we are
184                  * not using GPIOs to control PMIC bucks, but they must be defined
185                  * to please the driver.
186                  */
187                 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
188                                                  <1250000>, <1200000>,
189                                                  <1150000>, <1100000>,
190                                                  <1000000>, <950000>;
191
192                 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
193                                                  <1100000>, <1100000>,
194                                                  <1000000>, <1000000>,
195                                                  <1000000>, <1000000>;
196
197                 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
198                                                  <1200000>, <1200000>,
199                                                  <1200000>, <1200000>,
200                                                  <1200000>, <1200000>;
201
202                 clocks {
203                         compatible = "samsung,s5m8767-clk";
204                         #clock-cells = <1>;
205                         clock-output-names = "en32khz_ap",
206                                              "en32khz_cp",
207                                              "en32khz_bt";
208                 };
209
210                 regulators {
211                         ldo4_reg: LDO4 {
212                                 regulator-name = "P1.0V_LDO_OUT4";
213                                 regulator-min-microvolt = <1000000>;
214                                 regulator-max-microvolt = <1000000>;
215                                 regulator-always-on;
216                                 op_mode = <0>;
217                         };
218
219                         ldo5_reg: LDO5 {
220                                 regulator-name = "P1.8V_LDO_OUT5";
221                                 regulator-min-microvolt = <1800000>;
222                                 regulator-max-microvolt = <1800000>;
223                                 regulator-always-on;
224                                 op_mode = <0>;
225                         };
226
227                         ldo6_reg: LDO6 {
228                                 regulator-name = "vdd_mydp";
229                                 regulator-min-microvolt = <1200000>;
230                                 regulator-max-microvolt = <1200000>;
231                                 regulator-always-on;
232                                 op_mode = <3>;
233                         };
234
235                         ldo7_reg: LDO7 {
236                                 regulator-name = "P1.1V_LDO_OUT7";
237                                 regulator-min-microvolt = <1100000>;
238                                 regulator-max-microvolt = <1100000>;
239                                 regulator-always-on;
240                                 op_mode = <3>;
241                         };
242
243                         ldo8_reg: LDO8 {
244                                 regulator-name = "P1.0V_LDO_OUT8";
245                                 regulator-min-microvolt = <1000000>;
246                                 regulator-max-microvolt = <1000000>;
247                                 regulator-always-on;
248                                 op_mode = <3>;
249                         };
250
251                         ldo10_reg: LDO10 {
252                                 regulator-name = "P1.8V_LDO_OUT10";
253                                 regulator-min-microvolt = <1800000>;
254                                 regulator-max-microvolt = <1800000>;
255                                 regulator-always-on;
256                                 op_mode = <3>;
257                         };
258
259                         ldo11_reg: LDO11 {
260                                 regulator-name = "P1.8V_LDO_OUT11";
261                                 regulator-min-microvolt = <1800000>;
262                                 regulator-max-microvolt = <1800000>;
263                                 regulator-always-on;
264                                 op_mode = <0>;
265                         };
266
267                         ldo12_reg: LDO12 {
268                                 regulator-name = "P3.0V_LDO_OUT12";
269                                 regulator-min-microvolt = <3000000>;
270                                 regulator-max-microvolt = <3000000>;
271                                 regulator-always-on;
272                                 op_mode = <3>;
273                         };
274
275                         ldo13_reg: LDO13 {
276                                 regulator-name = "P1.8V_LDO_OUT13";
277                                 regulator-min-microvolt = <1800000>;
278                                 regulator-max-microvolt = <1800000>;
279                                 regulator-always-on;
280                                 op_mode = <0>;
281                         };
282
283                         ldo14_reg: LDO14 {
284                                 regulator-name = "P1.8V_LDO_OUT14";
285                                 regulator-min-microvolt = <1800000>;
286                                 regulator-max-microvolt = <1800000>;
287                                 regulator-always-on;
288                                 op_mode = <3>;
289                         };
290
291                         ldo15_reg: LDO15 {
292                                 regulator-name = "P1.0V_LDO_OUT15";
293                                 regulator-min-microvolt = <1000000>;
294                                 regulator-max-microvolt = <1000000>;
295                                 regulator-always-on;
296                                 op_mode = <3>;
297                         };
298
299                         ldo16_reg: LDO16 {
300                                 regulator-name = "P1.8V_LDO_OUT16";
301                                 regulator-min-microvolt = <1800000>;
302                                 regulator-max-microvolt = <1800000>;
303                                 regulator-always-on;
304                                 op_mode = <3>;
305                         };
306
307                         ldo17_reg: LDO17 {
308                                 regulator-name = "P1.2V_LDO_OUT17";
309                                 regulator-min-microvolt = <1200000>;
310                                 regulator-max-microvolt = <1200000>;
311                                 regulator-always-on;
312                                 op_mode = <0>;
313                         };
314
315                         ldo25_reg: LDO25 {
316                                 regulator-name = "vdd_bridge";
317                                 regulator-min-microvolt = <1200000>;
318                                 regulator-max-microvolt = <1200000>;
319                                 regulator-always-on;
320                                 op_mode = <1>;
321                         };
322
323                         buck1_reg: BUCK1 {
324                                 regulator-name = "vdd_mif";
325                                 regulator-min-microvolt = <950000>;
326                                 regulator-max-microvolt = <1300000>;
327                                 regulator-always-on;
328                                 regulator-boot-on;
329                                 op_mode = <3>;
330                         };
331
332                         buck2_reg: BUCK2 {
333                                 regulator-name = "vdd_arm";
334                                 regulator-min-microvolt = <850000>;
335                                 regulator-max-microvolt = <1350000>;
336                                 regulator-always-on;
337                                 regulator-boot-on;
338                                 op_mode = <3>;
339                         };
340
341                         buck3_reg: BUCK3 {
342                                 regulator-name = "vdd_int";
343                                 regulator-min-microvolt = <900000>;
344                                 regulator-max-microvolt = <1200000>;
345                                 regulator-always-on;
346                                 regulator-boot-on;
347                                 op_mode = <3>;
348                         };
349
350                         buck4_reg: BUCK4 {
351                                 regulator-name = "vdd_g3d";
352                                 regulator-min-microvolt = <850000>;
353                                 regulator-max-microvolt = <1300000>;
354                                 regulator-boot-on;
355                                 op_mode = <3>;
356                         };
357
358                         buck5_reg: BUCK5 {
359                                 regulator-name = "P1.8V_BUCK_OUT5";
360                                 regulator-min-microvolt = <1800000>;
361                                 regulator-max-microvolt = <1800000>;
362                                 regulator-always-on;
363                                 regulator-boot-on;
364                                 op_mode = <1>;
365                         };
366
367                         buck6_reg: BUCK6 {
368                                 regulator-name = "P1.2V_BUCK_OUT6";
369                                 regulator-min-microvolt = <2050000>;
370                                 regulator-max-microvolt = <2050000>;
371                                 regulator-always-on;
372                                 regulator-boot-on;
373                                 op_mode = <0>;
374                         };
375
376                         buck9_reg: BUCK9 {
377                                 regulator-name = "vdd_ummc";
378                                 regulator-min-microvolt = <950000>;
379                                 regulator-max-microvolt = <3000000>;
380                                 regulator-always-on;
381                                 regulator-boot-on;
382                                 op_mode = <3>;
383                         };
384                 };
385         };
386 };
387
388 &i2c_1 {
389         status = "okay";
390         samsung,i2c-sda-delay = <100>;
391         samsung,i2c-max-bus-freq = <378000>;
392 };
393
394 &i2c_2 {
395         status = "okay";
396         samsung,i2c-sda-delay = <100>;
397         samsung,i2c-max-bus-freq = <66000>;
398 };
399
400 &i2c_3 {
401         status = "okay";
402         samsung,i2c-sda-delay = <100>;
403         samsung,i2c-max-bus-freq = <66000>;
404 };
405
406 &i2c_4 {
407         status = "okay";
408         samsung,i2c-sda-delay = <100>;
409         samsung,i2c-max-bus-freq = <66000>;
410         clock-frequency = <66000>;
411
412         cros_ec: embedded-controller {
413                 compatible = "google,cros-ec-i2c";
414                 reg = <0x1e>;
415                 interrupts = <6 IRQ_TYPE_NONE>;
416                 interrupt-parent = <&gpx1>;
417                 wakeup-source;
418                 u-boot,i2c-offset-len = <0>;
419                 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
420                 cros_ec_ldo_tunnel: cros-ec-ldo-tunnel {
421                         compatible = "google,cros-ec-ldo-tunnel";
422                         #address-cells = <1>;
423                         #size-cells = <0>;
424                         power-regulator {
425                                 compatible = "ti,tps65090";
426                                 reg = <0x48>;
427
428                                 regulators {
429                                         dcdc1 {
430                                                 ti,enable-ext-control;
431                                         };
432                                         dcdc2 {
433                                                 ti,enable-ext-control;
434                                         };
435                                         dcdc3 {
436                                                 ti,enable-ext-control;
437                                         };
438                                         fet1: fet1 {
439                                                 regulator-name = "vcd_led";
440                                                 ti,overcurrent-wait = <3>;
441                                         };
442                                         tps65090_fet2: fet2 {
443                                                 regulator-name = "video_mid";
444                                                 regulator-always-on;
445                                                 ti,overcurrent-wait = <3>;
446                                         };
447                                         fet3 {
448                                                 regulator-name = "wwan_r";
449                                                 regulator-always-on;
450                                                 ti,overcurrent-wait = <3>;
451                                         };
452                                         fet4 {
453                                                 regulator-name = "sdcard";
454                                                 ti,overcurrent-wait = <3>;
455                                         };
456                                         fet5 {
457                                                 regulator-name = "camout";
458                                                 regulator-always-on;
459                                                 ti,overcurrent-wait = <3>;
460                                         };
461                                         fet6: fet6 {
462                                                 regulator-name = "lcd_vdd";
463                                                 ti,overcurrent-wait = <3>;
464                                         };
465                                         tps65090_fet7: fet7 {
466                                                 regulator-name = "video_mid_1a";
467                                                 regulator-always-on;
468                                                 ti,overcurrent-wait = <3>;
469                                         };
470                                         ldo1 {
471                                         };
472                                         ldo2 {
473                                         };
474                                 };
475                         };
476                 };
477         };
478 };
479
480 &i2c_5 {
481         status = "okay";
482         samsung,i2c-sda-delay = <100>;
483         samsung,i2c-max-bus-freq = <66000>;
484 };
485
486 &i2c_7 {
487         status = "okay";
488         samsung,i2c-sda-delay = <100>;
489         samsung,i2c-max-bus-freq = <66000>;
490
491         ps8622-bridge@8 {
492                 compatible = "parade,ps8622";
493                 reg = <0x8>;
494                 sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>;
495                 reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
496                 hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
497                 power-supply = <&ldo6_reg>;
498                 parade,regs = /bits/ 8 <
499                         0x02 0xa1 0x01 /* HPD low */
500                         /*
501                          * SW setting: [1:0] SW output 1.2V voltage is
502                          * lower to 96%
503                          */
504                         0x04 0x14 0x01
505                         /* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
506                         0x04 0xe3 0x20
507                         0x04 0xe2 0x80 /* [7] RCO SS enable */
508                         /*
509                          * RPHY Setting: [3:2] CDR tune wait cycle before
510                          * measure for fine tune b00: 1us,
511                          * 01: 0.5us, 10:2us, 11:4us
512                          */
513                         0x04 0x8a 0x0c
514                         0x04 0x89 0x08 /* [3] RFD always on */
515                         /*
516                          * CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times
517                          */
518                         0x04 0x71 0x2d
519                         /* 2.7G CDR settings */
520                         0x04 0x7d 0x07 /* NOF=40LSB for HBR CDR setting */
521                         0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
522                         0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
523                         /*
524                          * 1.62G CDR settings:
525                          * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
526                          */
527                         0x04 0xc0 0x12
528                         0x04 0xc1 0x92 /* Gitune=-37% */
529                         0x04 0xc2 0x1c /* Fbstep=100% */
530                         0x04 0x32 0x80 /* [7] LOS signal disable */
531                         /* RPIO Setting */
532                         /* [7:4] LVDS driver bias current 75% (250mV swing) */
533                         0x04 0x00 0xb0
534                          /* [7:6] Right-bar GPIO output strength is 8mA */
535                         0x04 0x15 0x40
536                         /* EQ Training State Machine Setting */
537                         0x04 0x54 0x10 /* RCO calibration start */
538                         /* [4:0] MAX_LANE_COUNT set to one lane */
539                         0x01 0x02 0x81
540                         /* [4:0] LANE_COUNT_SET set to one lane */
541                         0x01 0x21 0x81
542                         0x00 0x52 0x20
543                         0x00 0xf1 0x03 /* HPD CP toggle enable */
544                         0x00 0x62 0x41
545                         /* Counter number add 1ms counter delay */
546                         0x00 0xf6 0x01
547                         /*
548                          * [6]PWM function control by DPCD0040f[7], default
549                          * is PWM block always works
550                          */
551                         0x00 0x77 0x06
552                         0x00 0x4c 0x04
553                         /*
554                          * 04h Adjust VTotal tolerance to fix the 30Hz no-
555                          * display issue
556                          * DPCD00400='h00 Parade OUI = 'h001cf8
557                          */
558                         0x01 0xc0 0x00
559                         0x01 0xc1 0x1c /* DPCD00401='h1c */
560                         0x01 0xc2 0xf8 /* DPCD00402='hf8 */
561                         /* DPCD403~408 = ASCII code D2SLV5='h4432534c5635 */
562                         0x01 0xc3 0x44
563                         0x01 0xc4 0x32 /* DPCD404 */
564                         0x01 0xc5 0x53 /* DPCD405 */
565                         0x01 0xc6 0x4c /* DPCD406 */
566                         0x01 0xc7 0x56 /* DPCD407 */
567                         0x01 0xc8 0x35 /* DPCD408 */
568                         /* DPCD40A Initial Code major revision '01' */
569                         0x01 0xca 0x01
570                         /* DPCD40B Initial Code minor revision '05' */
571                         0x01 0xcb 0x05
572                         0x01 0xa5 0xa0 /* DPCD720, Select internal PWM */
573                         /*
574                          * 0xff for 100% PWM of brightness, 0h for 0% brightness
575                          */
576                         0x01 0xa7 0x00
577                         /*
578                          * Set LVDS output as 6bit-VESA mapping, single LVDS
579                          * channel
580                          */
581                         0x01 0xcc 0x13
582                         0x02 0xb1 0x20 /* Enable SSC set by register */
583                         /* Set SSC enabled and +/-1% central spreading */
584                         0x04 0x10 0x16
585                         0x04 0x59 0x60 /* MPU Clock source: LC => RCO */
586                         0x04 0x54 0x14 /* LC -> RCO */
587                         0x02 0xa1 0x91>; /* HPD high */
588         };
589
590         soundcodec@20 {
591                 reg = <0x20>;
592                 compatible = "maxim,max98088-codec";
593         };
594 };
595
596 #include "cros-ec-keyboard.dtsi"