git.sur5r.net Git - u-boot/blob - arch/arm/dts/imx6ul-opos6uldev.dts

   1 /*
   2  * Copyright 2017 Armadeus Systems <support@armadeus.com>
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 /dts-v1/;
  49 #include "imx6ul-opos6ul.dtsi"
  50
  51 / {
  52         model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
  53         compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
  54
  55         chosen {
  56                 stdout-path = &uart1;
  57         };
  58
  59         backlight {
  60                 compatible = "pwm-backlight";
  61                 pwms = <&pwm3 0 191000>;
  62                 brightness-levels = <0 4 8 16 32 64 128 255>;
  63                 default-brightness-level = <7>;
  64                 power-supply = <&reg_5v>;
  65                 status = "okay";
  66         };
  67
  68         gpio-keys {
  69                 compatible = "gpio-keys";
  70                 pinctrl-names = "default";
  71                 pinctrl-0 = <&pinctrl_gpio_keys>;
  72
  73                 user-button {
  74                         label = "User button";
  75                         gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
  76                         linux,code = <BTN_MISC>;
  77                         wakeup-source;
  78                 };
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83
  84                 user-led {
  85                         label = "User";
  86                         pinctrl-names = "default";
  87                         pinctrl-0 = <&pinctrl_led>;
  88                         gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
  89                         linux,default-trigger = "heartbeat";
  90                 };
  91         };
  92
  93         onewire {
  94                 compatible = "w1-gpio";
  95                 pinctrl-names = "default";
  96                 pinctrl-0 = <&pinctrl_w1>;
  97                 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
  98         };
  99
 100         reg_5v: regulator-5v {
 101                 compatible = "regulator-fixed";
 102                 regulator-name = "5V";
 103                 regulator-min-microvolt = <5000000>;
 104                 regulator-max-microvolt = <5000000>;
 105         };
 106
 107         reg_usbotg1_vbus: regulator-usbotg1vbus {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "usbotg1vbus";
 110                 regulator-min-microvolt = <5000000>;
 111                 regulator-max-microvolt = <5000000>;
 112                 pinctrl-names = "default";
 113                 pinctrl-0 = <&pinctrl_usbotg1_vbus>;
 114                 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 115                 enable-active-high;
 116         };
 117
 118         reg_usbotg2_vbus: regulator-usbotg2vbus {
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "usbotg2vbus";
 121                 regulator-min-microvolt = <5000000>;
 122                 regulator-max-microvolt = <5000000>;
 123                 pinctrl-names = "default";
 124                 pinctrl-0 = <&pinctrl_usbotg2_vbus>;
 125                 gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
 126                 enable-active-high;
 127         };
 128 };
 129
 130 &adc1 {
 131         vref-supply = <&reg_3v3>;
 132         status = "okay";
 133 };
 134
 135 &can1 {
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&pinctrl_flexcan1>;
 138         xceiver-supply = <&reg_5v>;
 139         status = "okay";
 140 };
 141
 142 &can2 {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&pinctrl_flexcan2>;
 145         xceiver-supply = <&reg_5v>;
 146         status = "okay";
 147 };
 148
 149 &ecspi4 {
 150         pinctrl-names = "default";
 151         pinctrl-0 = <&pinctrl_ecspi4>;
 152         cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
 153         status = "okay";
 154
 155         spidev0: spi@0 {
 156                 compatible = "spidev";
 157                 reg = <0>;
 158                 spi-max-frequency = <5000000>;
 159         };
 160
 161         spidev1: spi@1 {
 162                 compatible = "spidev";
 163                 reg = <1>;
 164                 spi-max-frequency = <5000000>;
 165         };
 166 };
 167
 168 &i2c1 {
 169         pinctrl-names = "default";
 170         pinctrl-0 = <&pinctrl_i2c1>;
 171         clock_frequency = <400000>;
 172         status = "okay";
 173 };
 174
 175 &i2c2 {
 176         pinctrl-names = "default";
 177         pinctrl-0 = <&pinctrl_i2c2>;
 178         clock_frequency = <400000>;
 179         status = "okay";
 180 };
 181
 182 &lcdif {
 183         pinctrl-names = "default";
 184         pinctrl-0 = <&pinctrl_lcdif>;
 185         display = <&display0>;
 186         lcd-supply = <&reg_3v3>;
 187         status = "okay";
 188
 189         display0: display0 {
 190                 bits-per-pixel = <32>;
 191                 bus-width = <18>;
 192
 193                 display-timings {
 194                         timing0: timing0 {
 195                                 clock-frequency = <33000033>;
 196                                 hactive = <800>;
 197                                 vactive = <480>;
 198                                 hback-porch = <96>;
 199                                 hfront-porch = <96>;
 200                                 vback-porch = <20>;
 201                                 vfront-porch = <21>;
 202                                 hsync-len = <64>;
 203                                 vsync-len = <4>;
 204                                 de-active = <1>;
 205                                 pixelclk-active = <0>;
 206                         };
 207                 };
 208         };
 209 };
 210
 211 &pwm3 {
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&pinctrl_pwm3>;
 214         status = "okay";
 215 };
 216
 217 &snvs_pwrkey {
 218         status = "disabled";
 219 };
 220
 221 &tsc {
 222         pinctrl-names = "default";
 223         pinctrl-0 = <&pinctrl_tsc>;
 224         xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 225         measure-delay-time = <0xffff>;
 226         pre-charge-time = <0xffff>;
 227         status = "okay";
 228 };
 229
 230 &uart1 {
 231         u-boot,dm-spl;
 232         pinctrl-names = "default";
 233         pinctrl-0 = <&pinctrl_uart1>;
 234         status = "okay";
 235 };
 236
 237 &uart2 {
 238         pinctrl-names = "default";
 239         pinctrl-0 = <&pinctrl_uart2>;
 240         status = "okay";
 241 };
 242
 243 &usbotg1 {
 244         pinctrl-names = "default";
 245         pinctrl-0 = <&pinctrl_usbotg1_id>;
 246         vbus-supply = <&reg_usbotg1_vbus>;
 247         dr_mode = "otg";
 248         disable-over-current;
 249         status = "okay";
 250 };
 251
 252 &usbotg2 {
 253         vbus-supply = <&reg_usbotg2_vbus>;
 254         dr_mode = "host";
 255         disable-over-current;
 256         status = "okay";
 257 };
 258
 259 &iomuxc {
 260         pinctrl-names = "default";
 261         pinctrl-0 = <&pinctrl_gpios>;
 262
 263         pinctrl_ecspi4: ecspi4grp {
 264                 fsl,pins = <
 265                         MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK      0x1b0b0
 266                         MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI      0x1b0b0
 267                         MX6UL_PAD_NAND_DATA06__ECSPI4_MISO      0x1b0b0
 268                         MX6UL_PAD_NAND_DATA01__GPIO4_IO03       0x1b0b0
 269                         MX6UL_PAD_NAND_DATA07__GPIO4_IO09       0x1b0b0
 270                 >;
 271         };
 272
 273         pinctrl_flexcan1: flexcan1grp {
 274                 fsl,pins = <
 275                         MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x0b0b0
 276                         MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x0b0b0
 277                 >;
 278         };
 279
 280         pinctrl_flexcan2: flexcan2grp {
 281                 fsl,pins = <
 282                         MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX      0x0b0b0
 283                         MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX      0x0b0b0
 284                 >;
 285         };
 286
 287         pinctrl_gpios: gpiosgrp {
 288                 fsl,pins = <
 289                         MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x0b0b0
 290                         MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25     0x0b0b0
 291                         MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24     0x0b0b0
 292                         MX6UL_PAD_NAND_RE_B__GPIO4_IO00         0x0b0b0
 293                         MX6UL_PAD_GPIO1_IO08__GPIO1_IO08        0x0b0b0
 294                         MX6UL_PAD_UART1_CTS_B__GPIO1_IO18       0x0b0b0
 295                         MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x0b0b0
 296                         MX6UL_PAD_NAND_WE_B__GPIO4_IO01         0x0b0b0
 297                         MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x0b0b0
 298                         MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x0b0b0
 299                         MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x0b0b0
 300                         MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x0b0b0
 301                         MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x0b0b0
 302                         MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06      0x0b0b0
 303                         MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x0b0b0
 304                         MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x0b0b0
 305                 >;
 306         };
 307
 308         pinctrl_gpio_keys: gpiokeysgrp {
 309                 fsl,pins = <
 310                         MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11    0x0b0b0
 311                 >;
 312         };
 313
 314         pinctrl_i2c1: i2c1grp {
 315                 fsl,pins = <
 316                         MX6UL_PAD_UART4_RX_DATA__I2C1_SDA       0x4001b8b0
 317                         MX6UL_PAD_UART4_TX_DATA__I2C1_SCL       0x4001b8b0
 318                 >;
 319         };
 320
 321         pinctrl_i2c2: i2c2grp {
 322                 fsl,pins = <
 323                         MX6UL_PAD_UART5_RX_DATA__I2C2_SDA       0x4001b8b0
 324                         MX6UL_PAD_UART5_TX_DATA__I2C2_SCL       0x4001b8b0
 325                 >;
 326         };
 327
 328         pinctrl_lcdif: lcdifgrp {
 329                 fsl,pins = <
 330                         MX6UL_PAD_LCD_CLK__LCDIF_CLK        0x100b1
 331                         MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
 332                         MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
 333                         MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
 334                         MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
 335                         MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
 336                         MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
 337                         MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
 338                         MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
 339                         MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
 340                         MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
 341                         MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
 342                         MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
 343                         MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
 344                         MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
 345                         MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
 346                         MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
 347                         MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
 348                         MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
 349                         MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
 350                         MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
 351                         MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
 352                 >;
 353         };
 354
 355         pinctrl_led: ledgrp {
 356                 fsl,pins = <
 357                         MX6UL_PAD_LCD_RESET__GPIO3_IO04         0x0b0b0
 358                 >;
 359         };
 360
 361         pinctrl_pwm3: pwm3grp {
 362                 fsl,pins = <
 363                         MX6UL_PAD_NAND_ALE__PWM3_OUT            0x1b0b0
 364                 >;
 365         };
 366
 367         pinctrl_tsc: tscgrp {
 368                 fsl,pins = <
 369                         MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
 370                         MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
 371                         MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
 372                         MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
 373                 >;
 374         };
 375
 376         pinctrl_uart1: uart1grp {
 377                 u-boot,dm-spl;
 378                 fsl,pins = <
 379                         MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x1b0b1
 380                         MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x1b0b1
 381                 >;
 382         };
 383
 384         pinctrl_uart2: uart2grp {
 385                 fsl,pins = <
 386                         MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x1b0b1
 387                         MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x1b0b1
 388                 >;
 389         };
 390
 391         pinctrl_usbotg1_id: usbotg1idgrp {
 392                 fsl,pins = <
 393                         MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x1b0b0
 394                 >;
 395         };
 396
 397         pinctrl_usbotg1_vbus: usbotg1vbusgrp {
 398                 fsl,pins = <
 399                         MX6UL_PAD_GPIO1_IO05__GPIO1_IO05        0x1b0b0
 400                 >;
 401         };
 402
 403         pinctrl_usbotg2_vbus: usbotg2vbusgrp {
 404                 fsl,pins = <
 405                         MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
 406                 >;
 407         };
 408
 409         pinctrl_w1: w1grp {
 410                 fsl,pins = <
 411                         MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x0b0b0
 412                 >;
 413         };
 414 };