2 * Device Tree Source for the Salvator-X board
4 * Copyright (C) 2015 Renesas Electronics Corp.
6 * This file is licensed under the terms of the GNU General Public License
7 * version 2. This program is licensed "as is" without any warranty of any
8 * kind, whether express or implied.
14 * This command is required when Playback/Capture
16 * amixer set "DVC Out" 100%
17 * amixer set "DVC In" 100%
21 * amixer set "DVC Out Mute" on
22 * amixer set "DVC In Mute" on
24 * You can use Volume Ramp
26 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
27 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
28 * amixer set "DVC Out Ramp" on
30 * amixer set "DVC Out" 80% // Volume Down
31 * amixer set "DVC Out" 100% // Volume Up
35 #include "r8a7795.dtsi"
36 #include <dt-bindings/gpio/gpio.h>
39 model = "Renesas Salvator-X board based on r8a7795";
40 compatible = "renesas,salvator-x", "renesas,r8a7795";
49 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
50 stdout-path = "serial0:115200n8";
54 device_type = "memory";
55 /* first 128MB is reserved for secure area. */
56 reg = <0x0 0x48000000 0x0 0x38000000>;
60 compatible = "fixed-clock";
62 clock-frequency = <24576000>;
65 reg_1p8v: regulator0 {
66 compatible = "regulator-fixed";
67 regulator-name = "fixed-1.8V";
68 regulator-min-microvolt = <1800000>;
69 regulator-max-microvolt = <1800000>;
74 reg_3p3v: regulator1 {
75 compatible = "regulator-fixed";
76 regulator-name = "fixed-3.3V";
77 regulator-min-microvolt = <3300000>;
78 regulator-max-microvolt = <3300000>;
83 vcc_sdhi0: regulator-vcc-sdhi0 {
84 compatible = "regulator-fixed";
86 regulator-name = "SDHI0 Vcc";
87 regulator-min-microvolt = <3300000>;
88 regulator-max-microvolt = <3300000>;
90 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
94 vccq_sdhi0: regulator-vccq-sdhi0 {
95 compatible = "regulator-gpio";
97 regulator-name = "SDHI0 VccQ";
98 regulator-min-microvolt = <1800000>;
99 regulator-max-microvolt = <3300000>;
101 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
107 vcc_sdhi3: regulator-vcc-sdhi3 {
108 compatible = "regulator-fixed";
110 regulator-name = "SDHI3 Vcc";
111 regulator-min-microvolt = <3300000>;
112 regulator-max-microvolt = <3300000>;
114 gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
118 vccq_sdhi3: regulator-vccq-sdhi3 {
119 compatible = "regulator-gpio";
121 regulator-name = "SDHI3 VccQ";
122 regulator-min-microvolt = <1800000>;
123 regulator-max-microvolt = <3300000>;
125 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
131 vbus0_usb2: regulator-vbus0-usb2 {
132 compatible = "regulator-fixed";
134 regulator-name = "USB20_VBUS0";
135 regulator-min-microvolt = <5000000>;
136 regulator-max-microvolt = <5000000>;
138 gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
142 audio_clkout: audio_clkout {
144 * This is same as <&rcar_sound 0>
145 * but needed to avoid cs2000/rcar_sound probe dead-lock
147 compatible = "fixed-clock";
149 clock-frequency = <11289600>;
153 compatible = "simple-audio-card";
155 simple-audio-card,format = "left_j";
156 simple-audio-card,bitclock-master = <&sndcpu>;
157 simple-audio-card,frame-master = <&sndcpu>;
159 sndcpu: simple-audio-card,cpu {
160 sound-dai = <&rcar_sound>;
163 sndcodec: simple-audio-card,codec {
164 sound-dai = <&ak4613>;
169 compatible = "adi,adv7123";
172 #address-cells = <1>;
177 adv7123_in: endpoint {
178 remote-endpoint = <&du_out_rgb>;
183 adv7123_out: endpoint {
184 remote-endpoint = <&vga_in>;
191 compatible = "vga-connector";
195 remote-endpoint = <&adv7123_out>;
202 pinctrl-0 = <&du_pins>;
203 pinctrl-names = "default";
209 remote-endpoint = <&adv7123_in>;
213 lvds_connector: endpoint {
220 clock-frequency = <16666666>;
224 clock-frequency = <32768>;
228 pinctrl-0 = <&scif_clk_pins>;
229 pinctrl-names = "default";
232 groups = "scif1_data_a", "scif1_ctrl";
236 groups = "scif2_data_a";
239 scif_clk_pins: scif_clk {
240 groups = "scif_clk_a";
241 function = "scif_clk";
251 groups = "avb_link", "avb_phy_int", "avb_mdc",
258 drive-strength = <24>;
262 pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
263 "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
264 drive-strength = <12>;
269 groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
274 groups = "sdhi0_data4", "sdhi0_ctrl";
276 power-source = <3300>;
279 sdhi0_pins_uhs: sd0_uhs {
280 groups = "sdhi0_data4", "sdhi0_ctrl";
282 power-source = <1800>;
286 groups = "sdhi2_data8", "sdhi2_ctrl";
288 power-source = <3300>;
291 sdhi2_pins_uhs: sd2_uhs {
292 groups = "sdhi2_data8", "sdhi2_ctrl";
294 power-source = <1800>;
298 groups = "sdhi3_data4", "sdhi3_ctrl";
300 power-source = <3300>;
303 sdhi3_pins_uhs: sd3_uhs {
304 groups = "sdhi3_data4", "sdhi3_ctrl";
306 power-source = <1800>;
310 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
314 sound_clk_pins: sound_clk {
315 groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
316 "audio_clkout_a", "audio_clkout3_a";
317 function = "audio_clk";
349 pinctrl-0 = <&scif1_pins>;
350 pinctrl-names = "default";
357 pinctrl-0 = <&scif2_pins>;
358 pinctrl-names = "default";
364 clock-frequency = <14745600>;
368 pinctrl-0 = <&i2c2_pins>;
369 pinctrl-names = "default";
373 clock-frequency = <100000>;
376 compatible = "asahi-kasei,ak4613";
377 #sound-dai-cells = <0>;
379 clocks = <&rcar_sound 3>;
381 asahi-kasei,in1-single-end;
382 asahi-kasei,in2-single-end;
383 asahi-kasei,out1-single-end;
384 asahi-kasei,out2-single-end;
385 asahi-kasei,out3-single-end;
386 asahi-kasei,out4-single-end;
387 asahi-kasei,out5-single-end;
388 asahi-kasei,out6-single-end;
391 cs2000: clk_multiplier@4f {
393 compatible = "cirrus,cs2000-cp";
395 clocks = <&audio_clkout>, <&x12_clk>;
396 clock-names = "clk_in", "ref_clk";
398 assigned-clocks = <&cs2000>;
399 assigned-clock-rates = <24576000>; /* 1/1 divide */
404 pinctrl-0 = <&sound_pins &sound_clk_pins>;
405 pinctrl-names = "default";
408 #sound-dai-cells = <0>;
410 /* audio_clkout0/1/2/3 */
412 clock-frequency = <11289600>;
416 /* update <audio_clk_b> to <cs2000> */
417 clocks = <&cpg CPG_MOD 1005>,
418 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
419 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
420 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
421 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
422 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
423 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
424 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
425 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
426 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
427 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
428 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
429 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
430 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
431 <&audio_clk_a>, <&cs2000>,
433 <&cpg CPG_CORE R8A7795_CLK_S0D4>;
437 playback = <&ssi0 &src0 &dvc0>;
438 capture = <&ssi1 &src1 &dvc1>;
448 pinctrl-0 = <&sdhi0_pins>;
449 pinctrl-1 = <&sdhi0_pins_uhs>;
450 pinctrl-names = "default", "state_uhs";
452 vmmc-supply = <&vcc_sdhi0>;
453 vqmmc-supply = <&vccq_sdhi0>;
454 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
455 wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
462 /* used for on-board 8bit eMMC */
463 pinctrl-0 = <&sdhi2_pins>;
464 pinctrl-1 = <&sdhi2_pins_uhs>;
465 pinctrl-names = "default", "state_uhs";
467 vmmc-supply = <®_3p3v>;
468 vqmmc-supply = <®_1p8v>;
475 pinctrl-0 = <&sdhi3_pins>;
476 pinctrl-1 = <&sdhi3_pins_uhs>;
477 pinctrl-names = "default", "state_uhs";
479 vmmc-supply = <&vcc_sdhi3>;
480 vqmmc-supply = <&vccq_sdhi3>;
481 cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
482 wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
498 clock-frequency = <22579200>;
506 pinctrl-0 = <&avb_pins>;
507 pinctrl-names = "default";
508 renesas,no-ether-link;
509 phy-handle = <&phy0>;
512 phy0: ethernet-phy@0 {
513 rxc-skew-ps = <1500>;
515 interrupt-parent = <&gpio2>;
516 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
525 pinctrl-0 = <&usb0_pins>;
526 pinctrl-names = "default";
528 vbus-supply = <&vbus0_usb2>;
533 pinctrl-0 = <&usb1_pins>;
534 pinctrl-names = "default";
540 pinctrl-0 = <&usb2_pins>;
541 pinctrl-names = "default";
575 clock-frequency = <100000000>;