]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/rk3288-veyron-chromebook.dtsi
powerpc: mpc86xx: Convert CONFIG_SYS_FSL_NUM_LAWS to Kconfig option
[u-boot] / arch / arm / dts / rk3288-veyron-chromebook.dtsi
1 /*
2  * Google Veyron (and derivatives) board device tree source
3  *
4  * Copyright 2014 Google, Inc
5  *
6  * SPDX-License-Identifier:     GPL-2.0
7  */
8
9 #include <dt-bindings/clock/rockchip,rk808.h>
10 #include <dt-bindings/input/input.h>
11 #include "rk3288-veyron.dtsi"
12
13 / {
14         aliases {
15                 i2c20 = &i2c_tunnel;
16                 video0 = &vopl;
17                 video1 = &vopb;
18         };
19
20         gpio_keys: gpio-keys {
21                 pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
22                 lid {
23                         label = "Lid";
24                         gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
25                         linux,code = <0>; /* SW_LID */
26                         linux,input-type = <5>; /* EV_SW */
27                         debounce-interval = <1>;
28                         gpio-key,wakeup;
29                 };
30         };
31
32         gpio-charger {
33                 compatible = "gpio-charger";
34                 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
35                 pinctrl-names = "default";
36                 pinctrl-0 = <&ac_present_ap>;
37                 charger-type = "mains";
38         };
39
40         /* A non-regulated voltage from power supply or battery */
41         vccsys: vccsys {
42                 compatible = "regulator-fixed";
43                 regulator-name = "vccsys";
44                 regulator-boot-on;
45                 regulator-always-on;
46         };
47
48         vcc33_sys: vcc33-sys {
49                 vin-supply = <&vccsys>;
50         };
51
52         vcc_5v: vcc-5v {
53                 vin-supply = <&vccsys>;
54         };
55
56         /* This turns on vbus for host1 (dwc2) */
57         vcc5_host1: vcc5-host1-regulator {
58                 compatible = "regulator-fixed";
59                 enable-active-high;
60                 gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
61                 pinctrl-names = "default";
62                 pinctrl-0 = <&host1_pwr_en>;
63                 regulator-name = "vcc5_host1";
64                 regulator-always-on;
65                 regulator-boot-on;
66         };
67
68         /* This turns on vbus for otg for host mode (dwc2) */
69         vcc5v_otg: vcc5v-otg-regulator {
70                 compatible = "regulator-fixed";
71                 enable-active-high;
72                 gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
73                 pinctrl-names = "default";
74                 pinctrl-0 = <&usbotg_pwren_h>;
75                 regulator-name = "vcc5_host2";
76                 regulator-always-on;
77                 regulator-boot-on;
78         };
79 };
80
81 &rk808 {
82         regulators {
83                 vcc33_ccd: LDO_REG8 {
84                         regulator-always-on;
85                         regulator-boot-on;
86                         regulator-min-microvolt = <3300000>;
87                         regulator-max-microvolt = <3300000>;
88                         regulator-name = "vcc33_ccd";
89                         regulator-suspend-mem-disabled;
90                 };
91         };
92 };
93
94 &spi0 {
95         status = "okay";
96         spi-activate-delay = <100>;
97         spi-max-frequency = <3000000>;
98         spi-deactivate-delay = <200>;
99
100         cros_ec: ec@0 {
101                 compatible = "google,cros-ec-spi";
102                 spi-max-frequency = <3000000>;
103                 interrupt-parent = <&gpio7>;
104                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
105                 ec-interrupt = <&gpio7 7 GPIO_ACTIVE_LOW>;
106                 pinctrl-names = "default";
107                 pinctrl-0 = <&ec_int>;
108                 reg = <0>;
109                 google,cros-ec-spi-pre-delay = <30>;
110
111                 i2c_tunnel: i2c-tunnel {
112                         compatible = "google,cros-ec-i2c-tunnel";
113                         google,remote-bus = <0>;
114                         #address-cells = <1>;
115                         #size-cells = <0>;
116                 };
117         };
118 };
119
120 &i2c4 {
121         trackpad@15 {
122                 compatible = "elan,i2c_touchpad";
123                 interrupt-parent = <&gpio7>;
124                 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
125                 pinctrl-names = "default";
126                 pinctrl-0 = <&trackpad_int>;
127                 reg = <0x15>;
128                 vcc-supply = <&vcc33_io>;
129                 wakeup-source;
130         };
131 };
132
133 &pinctrl {
134         pinctrl-0 = <
135                 /* Common for sleep and wake, but no owners */
136                 &ddr0_retention
137                 &ddrio_pwroff
138                 &global_pwroff
139
140                 /* Wake only */
141                 &suspend_l_wake
142                 &bt_dev_wake_awake
143         >;
144         pinctrl-1 = <
145                 /* Common for sleep and wake, but no owners */
146                 &ddr0_retention
147                 &ddrio_pwroff
148                 &global_pwroff
149
150                 /* Sleep only */
151                 &suspend_l_sleep
152                 &bt_dev_wake_sleep
153         >;
154
155         buttons {
156                 ap_lid_int_l: ap-lid-int-l {
157                         rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;
158                 };
159         };
160
161         charger {
162                 ac_present_ap: ac-present-ap {
163                         rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
164                 };
165         };
166
167         cros-ec {
168                 ec_int: ec-int {
169                         rockchip,pins = <7 7 RK_FUNC_GPIO &pcfg_pull_none>;
170                 };
171         };
172
173         sdmmc {
174                 sdmmc_wp_gpio: sdmmc-wp-gpio {
175                         rockchip,pins = <7 10 RK_FUNC_GPIO &pcfg_pull_up>;
176                 };
177         };
178
179         suspend {
180                 suspend_l_wake: suspend-l-wake {
181                         rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_low>;
182                 };
183
184                 suspend_l_sleep: suspend-l-sleep {
185                         rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_output_high>;
186                 };
187         };
188
189         trackpad {
190                 trackpad_int: trackpad-int {
191                         rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_up>;
192                 };
193         };
194
195         usb-host {
196                 host1_pwr_en: host1-pwr-en {
197                         rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>;
198                 };
199
200                 usbotg_pwren_h: usbotg-pwren-h {
201                         rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
202                 };
203         };
204 };
205
206 #include "cros-ec-keyboard.dtsi"