git.sur5r.net Git - u-boot/blob - arch/arm/dts/stih407-family.dtsi

   1 /*
   2  * Copyright (C) 2014 STMicroelectronics Limited.
   3  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * publishhed by the Free Software Foundation.
   8  */
   9 #include "stih407-pinctrl.dtsi"
  10 #include <dt-bindings/mfd/st-lpc.h>
  11 #include <dt-bindings/phy/phy.h>
  12 #include <dt-bindings/reset/stih407-resets.h>
  13 #include <dt-bindings/interrupt-controller/irq-st.h>
  14 / {
  15         #address-cells = <1>;
  16         #size-cells = <1>;
  17
  18         reserved-memory {
  19                 #address-cells = <1>;
  20                 #size-cells = <1>;
  21                 ranges;
  22
  23                 dmu_reserved: rproc@44000000 {
  24                         compatible = "shared-dma-pool";
  25                         reg = <0x44000000 0x01000000>;
  26                         no-map;
  27                 };
  28         };
  29
  30         cpus {
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 cpu@0 {
  34                         device_type = "cpu";
  35                         compatible = "arm,cortex-a9";
  36                         reg = <0>;
  37
  38                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  39                         cpu-release-addr = <0x94100A4>;
  40
  41                                          /* kHz     uV   */
  42                         operating-points = <1500000 0
  43                                             1200000 0
  44                                             800000  0
  45                                             500000  0>;
  46
  47                         clocks = <&clk_m_a9>;
  48                         clock-names = "cpu";
  49                         clock-latency = <100000>;
  50                         st,syscfg = <&syscfg_core 0x8e0>;
  51                 };
  52                 cpu@1 {
  53                         device_type = "cpu";
  54                         compatible = "arm,cortex-a9";
  55                         reg = <1>;
  56
  57                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  58                         cpu-release-addr = <0x94100A4>;
  59
  60                                          /* kHz     uV   */
  61                         operating-points = <1500000 0
  62                                             1200000 0
  63                                             800000  0
  64                                             500000  0>;
  65                 };
  66         };
  67
  68         intc: interrupt-controller@08761000 {
  69                 compatible = "arm,cortex-a9-gic";
  70                 #interrupt-cells = <3>;
  71                 interrupt-controller;
  72                 reg = <0x08761000 0x1000>, <0x08760100 0x100>;
  73         };
  74
  75         scu@08760000 {
  76                 compatible = "arm,cortex-a9-scu";
  77                 reg = <0x08760000 0x1000>;
  78         };
  79
  80         timer@08760200 {
  81                 interrupt-parent = <&intc>;
  82                 compatible = "arm,cortex-a9-global-timer";
  83                 reg = <0x08760200 0x100>;
  84                 interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
  85                 clocks = <&arm_periph_clk>;
  86         };
  87
  88         l2: cache-controller {
  89                 compatible = "arm,pl310-cache";
  90                 reg = <0x08762000 0x1000>;
  91                 arm,data-latency = <3 3 3>;
  92                 arm,tag-latency = <2 2 2>;
  93                 cache-unified;
  94                 cache-level = <2>;
  95         };
  96
  97         arm-pmu {
  98                 interrupt-parent = <&intc>;
  99                 compatible = "arm,cortex-a9-pmu";
 100                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 101         };
 102
 103         pwm_regulator: pwm-regulator {
 104                 compatible = "pwm-regulator";
 105                 pwms = <&pwm1 3 8448>;
 106                 regulator-name = "CPU_1V0_AVS";
 107                 regulator-min-microvolt = <784000>;
 108                 regulator-max-microvolt = <1299000>;
 109                 regulator-always-on;
 110                 max-duty-cycle = <255>;
 111                 status = "okay";
 112         };
 113
 114         soc {
 115                 #address-cells = <1>;
 116                 #size-cells = <1>;
 117                 interrupt-parent = <&intc>;
 118                 ranges;
 119                 compatible = "simple-bus";
 120
 121                 restart {
 122                         compatible = "st,stih407-restart";
 123                         st,syscfg = <&syscfg_sbc_reg>;
 124                         status = "okay";
 125                 };
 126
 127                 powerdown: powerdown-controller {
 128                         compatible = "st,stih407-powerdown";
 129                         #reset-cells = <1>;
 130                 };
 131
 132                 softreset: softreset-controller {
 133                         compatible = "st,stih407-softreset";
 134                         #reset-cells = <1>;
 135                 };
 136
 137                 picophyreset: picophyreset-controller {
 138                         compatible = "st,stih407-picophyreset";
 139                         #reset-cells = <1>;
 140                 };
 141
 142                 syscfg_sbc: sbc-syscfg@9620000 {
 143                         compatible = "st,stih407-sbc-syscfg", "syscon";
 144                         reg = <0x9620000 0x1000>;
 145                 };
 146
 147                 syscfg_front: front-syscfg@9280000 {
 148                         compatible = "st,stih407-front-syscfg", "syscon";
 149                         reg = <0x9280000 0x1000>;
 150                 };
 151
 152                 syscfg_rear: rear-syscfg@9290000 {
 153                         compatible = "st,stih407-rear-syscfg", "syscon";
 154                         reg = <0x9290000 0x1000>;
 155                 };
 156
 157                 syscfg_flash: flash-syscfg@92a0000 {
 158                         compatible = "st,stih407-flash-syscfg", "syscon";
 159                         reg = <0x92a0000 0x1000>;
 160                 };
 161
 162                 syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
 163                         compatible = "st,stih407-sbc-reg-syscfg", "syscon";
 164                         reg = <0x9600000 0x1000>;
 165                 };
 166
 167                 syscfg_core: core-syscfg@92b0000 {
 168                         compatible = "st,stih407-core-syscfg", "syscon";
 169                         reg = <0x92b0000 0x1000>;
 170                 };
 171
 172                 syscfg_lpm: lpm-syscfg@94b5100 {
 173                         compatible = "st,stih407-lpm-syscfg", "syscon";
 174                         reg = <0x94b5100 0x1000>;
 175                 };
 176
 177                 irq-syscfg {
 178                         compatible    = "st,stih407-irq-syscfg";
 179                         st,syscfg     = <&syscfg_core>;
 180                         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 181                                         <ST_IRQ_SYSCFG_PMU_1>;
 182                         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
 183                                         <ST_IRQ_SYSCFG_DISABLED>;
 184                 };
 185
 186                 /* Display */
 187                 vtg_main: sti-vtg-main@8d02800 {
 188                         compatible = "st,vtg";
 189                         reg = <0x8d02800 0x200>;
 190                         interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
 191                 };
 192
 193                 vtg_aux: sti-vtg-aux@8d00200 {
 194                         compatible = "st,vtg";
 195                         reg = <0x8d00200 0x100>;
 196                         interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
 197                 };
 198
 199                 serial@9830000 {
 200                         compatible = "st,asc";
 201                         reg = <0x9830000 0x2c>;
 202                         interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
 203                         pinctrl-names = "default";
 204                         pinctrl-0 = <&pinctrl_serial0>;
 205                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 206
 207                         status = "disabled";
 208                 };
 209
 210                 serial@9831000 {
 211                         compatible = "st,asc";
 212                         reg = <0x9831000 0x2c>;
 213                         interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
 214                         pinctrl-names = "default";
 215                         pinctrl-0 = <&pinctrl_serial1>;
 216                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 217
 218                         status = "disabled";
 219                 };
 220
 221                 serial@9832000 {
 222                         compatible = "st,asc";
 223                         reg = <0x9832000 0x2c>;
 224                         interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
 225                         pinctrl-names = "default";
 226                         pinctrl-0 = <&pinctrl_serial2>;
 227                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 228
 229                         status = "disabled";
 230                 };
 231
 232                 /* SBC_ASC0 - UART10 */
 233                 sbc_serial0: serial@9530000 {
 234                         compatible = "st,asc";
 235                         reg = <0x9530000 0x2c>;
 236                         interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
 237                         pinctrl-names = "default";
 238                         pinctrl-0 = <&pinctrl_sbc_serial0>;
 239                         clocks = <&clk_sysin>;
 240
 241                         status = "disabled";
 242                 };
 243
 244                 serial@9531000 {
 245                         compatible = "st,asc";
 246                         reg = <0x9531000 0x2c>;
 247                         interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
 248                         pinctrl-names = "default";
 249                         pinctrl-0 = <&pinctrl_sbc_serial1>;
 250                         clocks = <&clk_sysin>;
 251
 252                         status = "disabled";
 253                 };
 254
 255                 i2c@9840000 {
 256                         compatible = "st,comms-ssc4-i2c";
 257                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 258                         reg = <0x9840000 0x110>;
 259                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 260                         clock-names = "ssc";
 261                         clock-frequency = <400000>;
 262                         pinctrl-names = "default";
 263                         pinctrl-0 = <&pinctrl_i2c0_default>;
 264                         #address-cells = <1>;
 265                         #size-cells = <0>;
 266
 267                         status = "disabled";
 268                 };
 269
 270                 i2c@9841000 {
 271                         compatible = "st,comms-ssc4-i2c";
 272                         reg = <0x9841000 0x110>;
 273                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 274                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 275                         clock-names = "ssc";
 276                         clock-frequency = <400000>;
 277                         pinctrl-names = "default";
 278                         pinctrl-0 = <&pinctrl_i2c1_default>;
 279                         #address-cells = <1>;
 280                         #size-cells = <0>;
 281
 282                         status = "disabled";
 283                 };
 284
 285                 i2c@9842000 {
 286                         compatible = "st,comms-ssc4-i2c";
 287                         reg = <0x9842000 0x110>;
 288                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 289                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 290                         clock-names = "ssc";
 291                         clock-frequency = <400000>;
 292                         pinctrl-names = "default";
 293                         pinctrl-0 = <&pinctrl_i2c2_default>;
 294                         #address-cells = <1>;
 295                         #size-cells = <0>;
 296
 297                         status = "disabled";
 298                 };
 299
 300                 i2c@9843000 {
 301                         compatible = "st,comms-ssc4-i2c";
 302                         reg = <0x9843000 0x110>;
 303                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 305                         clock-names = "ssc";
 306                         clock-frequency = <400000>;
 307                         pinctrl-names = "default";
 308                         pinctrl-0 = <&pinctrl_i2c3_default>;
 309                         #address-cells = <1>;
 310                         #size-cells = <0>;
 311
 312                         status = "disabled";
 313                 };
 314
 315                 i2c@9844000 {
 316                         compatible = "st,comms-ssc4-i2c";
 317                         reg = <0x9844000 0x110>;
 318                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 319                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 320                         clock-names = "ssc";
 321                         clock-frequency = <400000>;
 322                         pinctrl-names = "default";
 323                         pinctrl-0 = <&pinctrl_i2c4_default>;
 324                         #address-cells = <1>;
 325                         #size-cells = <0>;
 326
 327                         status = "disabled";
 328                 };
 329
 330                 i2c@9845000 {
 331                         compatible = "st,comms-ssc4-i2c";
 332                         reg = <0x9845000 0x110>;
 333                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 334                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 335                         clock-names = "ssc";
 336                         clock-frequency = <400000>;
 337                         pinctrl-names = "default";
 338                         pinctrl-0 = <&pinctrl_i2c5_default>;
 339                         #address-cells = <1>;
 340                         #size-cells = <0>;
 341
 342                         status = "disabled";
 343                 };
 344
 345
 346                 /* SSCs on SBC */
 347                 i2c@9540000 {
 348                         compatible = "st,comms-ssc4-i2c";
 349                         reg = <0x9540000 0x110>;
 350                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 351                         clocks = <&clk_sysin>;
 352                         clock-names = "ssc";
 353                         clock-frequency = <400000>;
 354                         pinctrl-names = "default";
 355                         pinctrl-0 = <&pinctrl_i2c10_default>;
 356                         #address-cells = <1>;
 357                         #size-cells = <0>;
 358
 359                         status = "disabled";
 360                 };
 361
 362                 i2c@9541000 {
 363                         compatible = "st,comms-ssc4-i2c";
 364                         reg = <0x9541000 0x110>;
 365                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 366                         clocks = <&clk_sysin>;
 367                         clock-names = "ssc";
 368                         clock-frequency = <400000>;
 369                         pinctrl-names = "default";
 370                         pinctrl-0 = <&pinctrl_i2c11_default>;
 371                         #address-cells = <1>;
 372                         #size-cells = <0>;
 373
 374                         status = "disabled";
 375                 };
 376
 377                 usb2_picophy0: phy1 {
 378                         compatible = "st,stih407-usb2-phy";
 379                         #phy-cells = <0>;
 380                         st,syscfg = <&syscfg_core 0x100 0xf4>;
 381                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 382                                  <&picophyreset STIH407_PICOPHY2_RESET>;
 383                         reset-names = "global", "port";
 384                 };
 385
 386                 miphy28lp_phy: miphy28lp@9b22000 {
 387                         compatible = "st,miphy28lp-phy";
 388                         st,syscfg = <&syscfg_core>;
 389                         #address-cells  = <1>;
 390                         #size-cells     = <1>;
 391                         ranges;
 392
 393                         phy_port0: port@9b22000 {
 394                                 reg = <0x9b22000 0xff>,
 395                                       <0x9b09000 0xff>,
 396                                       <0x9b04000 0xff>;
 397                                 reg-names = "sata-up",
 398                                             "pcie-up",
 399                                             "pipew";
 400
 401                                 st,syscfg = <0x114 0x818 0xe0 0xec>;
 402                                 #phy-cells = <1>;
 403
 404                                 reset-names = "miphy-sw-rst";
 405                                 resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 406                         };
 407
 408                         phy_port1: port@9b2a000 {
 409                                 reg = <0x9b2a000 0xff>,
 410                                       <0x9b19000 0xff>,
 411                                       <0x9b14000 0xff>;
 412                                 reg-names = "sata-up",
 413                                             "pcie-up",
 414                                             "pipew";
 415
 416                                 st,syscfg = <0x118 0x81c 0xe4 0xf0>;
 417
 418                                 #phy-cells = <1>;
 419
 420                                 reset-names = "miphy-sw-rst";
 421                                 resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 422                         };
 423
 424                         phy_port2: port@8f95000 {
 425                                 reg = <0x8f95000 0xff>,
 426                                       <0x8f90000 0xff>;
 427                                 reg-names = "pipew",
 428                                             "usb3-up";
 429
 430                                 st,syscfg = <0x11c 0x820>;
 431
 432                                 #phy-cells = <1>;
 433
 434                                 reset-names = "miphy-sw-rst";
 435                                 resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 436                         };
 437                 };
 438
 439                 spi@9840000 {
 440                         compatible = "st,comms-ssc4-spi";
 441                         reg = <0x9840000 0x110>;
 442                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 443                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 444                         clock-names = "ssc";
 445                         pinctrl-0 = <&pinctrl_spi0_default>;
 446                         pinctrl-names = "default";
 447                         #address-cells = <1>;
 448                         #size-cells = <0>;
 449
 450                         status = "disabled";
 451                 };
 452
 453                 spi@9841000 {
 454                         compatible = "st,comms-ssc4-spi";
 455                         reg = <0x9841000 0x110>;
 456                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 457                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 458                         clock-names = "ssc";
 459                         pinctrl-names = "default";
 460                         pinctrl-0 = <&pinctrl_spi1_default>;
 461
 462                         status = "disabled";
 463                 };
 464
 465                 spi@9842000 {
 466                         compatible = "st,comms-ssc4-spi";
 467                         reg = <0x9842000 0x110>;
 468                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 469                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 470                         clock-names = "ssc";
 471                         pinctrl-names = "default";
 472                         pinctrl-0 = <&pinctrl_spi2_default>;
 473
 474                         status = "disabled";
 475                 };
 476
 477                 spi@9843000 {
 478                         compatible = "st,comms-ssc4-spi";
 479                         reg = <0x9843000 0x110>;
 480                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 481                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 482                         clock-names = "ssc";
 483                         pinctrl-names = "default";
 484                         pinctrl-0 = <&pinctrl_spi3_default>;
 485
 486                         status = "disabled";
 487                 };
 488
 489                 spi@9844000 {
 490                         compatible = "st,comms-ssc4-spi";
 491                         reg = <0x9844000 0x110>;
 492                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 493                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 494                         clock-names = "ssc";
 495                         pinctrl-names = "default";
 496                         pinctrl-0 = <&pinctrl_spi4_default>;
 497
 498                         status = "disabled";
 499                 };
 500
 501                 /* SBC SSC */
 502                 spi@9540000 {
 503                         compatible = "st,comms-ssc4-spi";
 504                         reg = <0x9540000 0x110>;
 505                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 506                         clocks = <&clk_sysin>;
 507                         clock-names = "ssc";
 508                         pinctrl-names = "default";
 509                         pinctrl-0 = <&pinctrl_spi10_default>;
 510
 511                         status = "disabled";
 512                 };
 513
 514                 spi@9541000 {
 515                         compatible = "st,comms-ssc4-spi";
 516                         reg = <0x9541000 0x110>;
 517                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 518                         clocks = <&clk_sysin>;
 519                         clock-names = "ssc";
 520                         pinctrl-names = "default";
 521                         pinctrl-0 = <&pinctrl_spi11_default>;
 522
 523                         status = "disabled";
 524                 };
 525
 526                 spi@9542000 {
 527                         compatible = "st,comms-ssc4-spi";
 528                         reg = <0x9542000 0x110>;
 529                         interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 530                         clocks = <&clk_sysin>;
 531                         clock-names = "ssc";
 532                         pinctrl-names = "default";
 533                         pinctrl-0 = <&pinctrl_spi12_default>;
 534
 535                         status = "disabled";
 536                 };
 537
 538                 mmc0: sdhci@09060000 {
 539                         compatible = "st,sdhci-stih407", "st,sdhci";
 540                         status = "disabled";
 541                         reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
 542                         reg-names = "mmc", "top-mmc-delay";
 543                         interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
 544                         interrupt-names = "mmcirq";
 545                         pinctrl-names = "default";
 546                         pinctrl-0 = <&pinctrl_mmc0>;
 547                         clock-names = "mmc", "icn";
 548                         clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
 549                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 550                         bus-width = <8>;
 551                 };
 552
 553                 mmc1: sdhci@09080000 {
 554                         compatible = "st,sdhci-stih407", "st,sdhci";
 555                         status = "disabled";
 556                         reg = <0x09080000 0x7ff>;
 557                         reg-names = "mmc";
 558                         interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
 559                         interrupt-names = "mmcirq";
 560                         pinctrl-names = "default";
 561                         pinctrl-0 = <&pinctrl_sd1>;
 562                         clock-names = "mmc", "icn";
 563                         clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
 564                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 565                         resets = <&softreset STIH407_MMC1_SOFTRESET>;
 566                         bus-width = <4>;
 567                 };
 568
 569                 /* Watchdog and Real-Time Clock */
 570                 lpc@8787000 {
 571                         compatible = "st,stih407-lpc";
 572                         reg = <0x8787000 0x1000>;
 573                         interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
 574                         clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
 575                         timeout-sec = <120>;
 576                         st,syscfg = <&syscfg_core>;
 577                         st,lpc-mode = <ST_LPC_MODE_WDT>;
 578                 };
 579
 580                 lpc@8788000 {
 581                         compatible = "st,stih407-lpc";
 582                         reg = <0x8788000 0x1000>;
 583                         interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
 584                         clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
 585                         st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 586                 };
 587
 588                 sata0: sata@9b20000 {
 589                         compatible = "st,ahci";
 590                         reg = <0x9b20000 0x1000>;
 591
 592                         interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
 593                         interrupt-names = "hostc";
 594
 595                         phys = <&phy_port0 PHY_TYPE_SATA>;
 596                         phy-names = "ahci_phy";
 597
 598                         resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 599                                  <&softreset STIH407_SATA0_SOFTRESET>,
 600                                  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
 601                         reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
 602
 603                         clock-names = "ahci_clk";
 604                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 605
 606                         ports-implemented = <0x1>;
 607
 608                         status = "disabled";
 609                 };
 610
 611                 sata1: sata@9b28000 {
 612                         compatible = "st,ahci";
 613                         reg = <0x9b28000 0x1000>;
 614
 615                         interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
 616                         interrupt-names = "hostc";
 617
 618                         phys = <&phy_port1 PHY_TYPE_SATA>;
 619                         phy-names = "ahci_phy";
 620
 621                         resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 622                                  <&softreset STIH407_SATA1_SOFTRESET>,
 623                                  <&softreset STIH407_SATA1_PWR_SOFTRESET>;
 624                         reset-names = "pwr-dwn",
 625                                       "sw-rst",
 626                                       "pwr-rst";
 627
 628                         clock-names = "ahci_clk";
 629                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 630
 631                         ports-implemented = <0x1>;
 632
 633                         status = "disabled";
 634                 };
 635
 636
 637                 st_dwc3: dwc3@8f94000 {
 638                         compatible      = "st,stih407-dwc3";
 639                         reg             = <0x08f94000 0x1000>, <0x110 0x4>;
 640                         reg-names       = "reg-glue", "syscfg-reg";
 641                         st,syscfg       = <&syscfg_core>;
 642                         resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 643                                           <&softreset STIH407_MIPHY2_SOFTRESET>;
 644                         reset-names     = "powerdown", "softreset";
 645                         #address-cells  = <1>;
 646                         #size-cells     = <1>;
 647                         pinctrl-names   = "default";
 648                         pinctrl-0       = <&pinctrl_usb3>;
 649                         ranges;
 650
 651                         status = "disabled";
 652
 653                         dwc3: dwc3@9900000 {
 654                                 compatible      = "snps,dwc3";
 655                                 reg             = <0x09900000 0x100000>;
 656                                 interrupts      = <GIC_SPI 155 IRQ_TYPE_NONE>;
 657                                 dr_mode         = "host";
 658                                 phy-names       = "usb2-phy", "usb3-phy";
 659                                 phys            = <&usb2_picophy0>,
 660                                                   <&phy_port2 PHY_TYPE_USB3>;
 661                         };
 662                 };
 663
 664                 /* COMMS PWM Module */
 665                 pwm0: pwm@9810000 {
 666                         compatible      = "st,sti-pwm";
 667                         #pwm-cells      = <2>;
 668                         reg             = <0x9810000 0x68>;
 669                         interrupts      = <GIC_SPI 128 IRQ_TYPE_NONE>;
 670                         pinctrl-names   = "default";
 671                         pinctrl-0       = <&pinctrl_pwm0_chan0_default>;
 672                         clock-names     = "pwm";
 673                         clocks          = <&clk_sysin>;
 674                         st,pwm-num-chan = <1>;
 675
 676                         status          = "disabled";
 677                 };
 678
 679                 /* SBC PWM Module */
 680                 pwm1: pwm@9510000 {
 681                         compatible      = "st,sti-pwm";
 682                         #pwm-cells      = <2>;
 683                         reg             = <0x9510000 0x68>;
 684                         pinctrl-names   = "default";
 685                         pinctrl-0       = <&pinctrl_pwm1_chan0_default
 686                                         &pinctrl_pwm1_chan1_default
 687                                         &pinctrl_pwm1_chan2_default
 688                                         &pinctrl_pwm1_chan3_default>;
 689                         clock-names     = "pwm";
 690                         clocks          = <&clk_sysin>;
 691                         st,pwm-num-chan = <4>;
 692
 693                         status          = "disabled";
 694                 };
 695
 696                 rng10: rng@08a89000 {
 697                         compatible      = "st,rng";
 698                         reg             = <0x08a89000 0x1000>;
 699                         clocks          = <&clk_sysin>;
 700                         status          = "okay";
 701                 };
 702
 703                 rng11: rng@08a8a000 {
 704                         compatible      = "st,rng";
 705                         reg             = <0x08a8a000 0x1000>;
 706                         clocks          = <&clk_sysin>;
 707                         status          = "okay";
 708                 };
 709
 710                 ethernet0: dwmac@9630000 {
 711                         device_type = "network";
 712                         status = "disabled";
 713                         compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
 714                         reg = <0x9630000 0x8000>, <0x80 0x4>;
 715                         reg-names = "stmmaceth", "sti-ethconf";
 716
 717                         st,syscon = <&syscfg_sbc_reg 0x80>;
 718                         st,gmac_en;
 719                         resets = <&softreset STIH407_ETH1_SOFTRESET>;
 720                         reset-names = "stmmaceth";
 721
 722                         interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
 723                                      <GIC_SPI 99 IRQ_TYPE_NONE>;
 724                         interrupt-names = "macirq", "eth_wake_irq";
 725
 726                         /* DMA Bus Mode */
 727                         snps,pbl = <8>;
 728
 729                         pinctrl-names = "default";
 730                         pinctrl-0 = <&pinctrl_rgmii1>;
 731
 732                         clock-names = "stmmaceth", "sti-ethclk";
 733                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 734                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
 735                 };
 736
 737                 cec: sti-cec@094a087c {
 738                         compatible = "st,stih-cec";
 739                         reg = <0x94a087c 0x64>;
 740                         clocks = <&clk_sysin>;
 741                         clock-names = "cec-clk";
 742                         interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
 743                         interrupt-names = "cec-irq";
 744                         pinctrl-names = "default";
 745                         pinctrl-0 = <&pinctrl_cec0_default>;
 746                         resets = <&softreset STIH407_LPM_SOFTRESET>;
 747                 };
 748
 749                 rng10: rng@08a89000 {
 750                         compatible      = "st,rng";
 751                         reg             = <0x08a89000 0x1000>;
 752                         clocks          = <&clk_sysin>;
 753                         status          = "okay";
 754                 };
 755
 756                 rng11: rng@08a8a000 {
 757                         compatible      = "st,rng";
 758                         reg             = <0x08a8a000 0x1000>;
 759                         clocks          = <&clk_sysin>;
 760                         status          = "okay";
 761                 };
 762
 763                 mailbox0: mailbox@8f00000  {
 764                         compatible      = "st,stih407-mailbox";
 765                         reg             = <0x8f00000 0x1000>;
 766                         interrupts      = <GIC_SPI 1 IRQ_TYPE_NONE>;
 767                         #mbox-cells     = <2>;
 768                         mbox-name       = "a9";
 769                         status          = "okay";
 770                 };
 771
 772                 mailbox1: mailbox@8f01000 {
 773                         compatible      = "st,stih407-mailbox";
 774                         reg             = <0x8f01000 0x1000>;
 775                         #mbox-cells     = <2>;
 776                         mbox-name       = "st231_gp_1";
 777                         status          = "okay";
 778                 };
 779
 780                 mailbox2: mailbox@8f02000 {
 781                         compatible      = "st,stih407-mailbox";
 782                         reg             = <0x8f02000 0x1000>;
 783                         #mbox-cells     = <2>;
 784                         mbox-name       = "st231_gp_0";
 785                         status          = "okay";
 786                 };
 787
 788                 mailbox3: mailbox@8f03000 {
 789                         compatible      = "st,stih407-mailbox";
 790                         reg             = <0x8f03000 0x1000>;
 791                         #mbox-cells     = <2>;
 792                         mbox-name       = "st231_audio_video";
 793                         status          = "okay";
 794                 };
 795
 796                 st231_delta: st231-delta@44000000 {
 797                         compatible      = "st,st231-rproc";
 798                         memory-region   = <&dmu_reserved>;
 799                         resets          = <&softreset STIH407_ST231_DMU_SOFTRESET>;
 800                         reset-names     = "sw_reset";
 801                         clocks          = <&clk_s_c0_flexgen CLK_ST231_DMU>;
 802                         clock-frequency = <600000000>;
 803                         st,syscfg       = <&syscfg_core 0x224>;
 804                         #mbox-cells = <1>;
 805                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 806                         mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
 807                 };
 808
 809                 /* fdma audio */
 810                 fdma0: dma-controller@8e20000 {
 811                         compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
 812                         reg = <0x8e20000 0x8000>,
 813                               <0x8e30000 0x3000>,
 814                               <0x8e37000 0x1000>,
 815                               <0x8e38000 0x8000>;
 816                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 817                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 818                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 819                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 820                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 821                         interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
 822                         dma-channels = <16>;
 823                         #dma-cells = <3>;
 824                 };
 825
 826                 /* fdma app */
 827                 fdma1: dma-controller@8e40000 {
 828                         compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
 829                         reg = <0x8e40000 0x8000>,
 830                               <0x8e50000 0x3000>,
 831                               <0x8e57000 0x1000>,
 832                               <0x8e58000 0x8000>;
 833                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 834                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 835                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 836                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 837                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 838
 839                         interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>;
 840                         dma-channels = <16>;
 841                         #dma-cells = <3>;
 842                 };
 843
 844                 /* fdma free running */
 845                 fdma2: dma-controller@8e60000 {
 846                         compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
 847                         reg = <0x8e60000 0x8000>,
 848                               <0x8e70000 0x3000>,
 849                               <0x8e77000 0x1000>,
 850                               <0x8e78000 0x8000>;
 851                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 852                         interrupts = <GIC_SPI 9 IRQ_TYPE_NONE>;
 853                         dma-channels = <16>;
 854                         #dma-cells = <3>;
 855                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 856                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 857                                 <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
 858                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 859                 };
 860
 861                 sti_sasg_codec: sti-sasg-codec {
 862                         compatible = "st,stih407-sas-codec";
 863                         #sound-dai-cells = <1>;
 864                         status = "disabled";
 865                         st,syscfg = <&syscfg_core>;
 866                 };
 867
 868                 sti_uni_player0: sti-uni-player@8d80000 {
 869                         compatible = "st,stih407-uni-player-hdmi";
 870                         #sound-dai-cells = <0>;
 871                         st,syscfg = <&syscfg_core>;
 872                         clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
 873                         assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
 874                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
 875                         assigned-clock-rates = <50000000>;
 876                         reg = <0x8d80000 0x158>;
 877                         interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
 878                         dmas = <&fdma0 2 0 1>;
 879                         dma-names = "tx";
 880
 881                         status          = "disabled";
 882                 };
 883
 884                 sti_uni_player1: sti-uni-player@8d81000 {
 885                         compatible = "st,stih407-uni-player-pcm-out";
 886                         #sound-dai-cells = <0>;
 887                         st,syscfg = <&syscfg_core>;
 888                         clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
 889                         assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
 890                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
 891                         assigned-clock-rates = <50000000>;
 892                         reg = <0x8d81000 0x158>;
 893                         interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
 894                         dmas = <&fdma0 3 0 1>;
 895                         dma-names = "tx";
 896
 897                         status = "disabled";
 898                 };
 899
 900                 sti_uni_player2: sti-uni-player@8d82000 {
 901                         compatible = "st,stih407-uni-player-dac";
 902                         #sound-dai-cells = <0>;
 903                         st,syscfg = <&syscfg_core>;
 904                         clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
 905                         assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
 906                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
 907                         assigned-clock-rates = <50000000>;
 908                         reg = <0x8d82000 0x158>;
 909                         interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
 910                         dmas = <&fdma0 4 0 1>;
 911                         dma-names = "tx";
 912
 913                         status = "disabled";
 914                 };
 915
 916                 sti_uni_player3: sti-uni-player@8d85000 {
 917                         compatible = "st,stih407-uni-player-spdif";
 918                         #sound-dai-cells = <0>;
 919                         st,syscfg = <&syscfg_core>;
 920                         clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
 921                         assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
 922                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
 923                         assigned-clock-rates = <50000000>;
 924                         reg = <0x8d85000 0x158>;
 925                         interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
 926                         dmas = <&fdma0 7 0 1>;
 927                         dma-names = "tx";
 928
 929                         status = "disabled";
 930                 };
 931
 932                 sti_uni_reader0: sti-uni-reader@8d83000 {
 933                         compatible = "st,stih407-uni-reader-pcm_in";
 934                         #sound-dai-cells = <0>;
 935                         st,syscfg = <&syscfg_core>;
 936                         reg = <0x8d83000 0x158>;
 937                         interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>;
 938                         dmas = <&fdma0 5 0 1>;
 939                         dma-names = "rx";
 940
 941                         status = "disabled";
 942                 };
 943
 944                 sti_uni_reader1: sti-uni-reader@8d84000 {
 945                         compatible = "st,stih407-uni-reader-hdmi";
 946                         #sound-dai-cells = <0>;
 947                         st,syscfg = <&syscfg_core>;
 948                         reg = <0x8d84000 0x158>;
 949                         interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>;
 950                         dmas = <&fdma0 6 0 1>;
 951                         dma-names = "rx";
 952
 953                         status = "disabled";
 954                 };
 955
 956                 rc: rc@09518000 {
 957                         compatible = "st,comms-irb";
 958                         reg = <0x09518000 0x234>;
 959                         interrupts = <GIC_SPI 132 IRQ_TYPE_NONE>;
 960                         rx-mode = "infrared";
 961                         pinctrl-names = "default";
 962                         pinctrl-0 = <&pinctrl_ir
 963                                      &pinctrl_uhf
 964                                      &pinctrl_tx
 965                                      &pinctrl_tx_od>;
 966                         clocks = <&clk_sysin>;
 967                         resets = <&softreset STIH407_IRB_SOFTRESET>;
 968
 969                         status = "disabled";
 970                 };
 971
 972                 socinfo {
 973                         compatible = "st,stih407-socinfo";
 974                         st,syscfg = <&syscfg_core>;
 975                 };
 976         };
 977 };