]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/stm32f469-disco.dts
ARM: DTS: stm32: add SDIO controller support for stm32f469-disco
[u-boot] / arch / arm / dts / stm32f469-disco.dts
1 /*
2  * Copyright 2016 - Lee Jones <lee.jones@linaro.org>
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of the
12  *     License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  * Or, alternatively,
20  *
21  *  b) Permission is hereby granted, free of charge, to any person
22  *     obtaining a copy of this software and associated documentation
23  *     files (the "Software"), to deal in the Software without
24  *     restriction, including without limitation the rights to use,
25  *     copy, modify, merge, publish, distribute, sublicense, and/or
26  *     sell copies of the Software, and to permit persons to whom the
27  *     Software is furnished to do so, subject to the following
28  *     conditions:
29  *
30  *     The above copyright notice and this permission notice shall be
31  *     included in all copies or substantial portions of the Software.
32  *
33  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40  *     OTHER DEALINGS IN THE SOFTWARE.
41  */
42
43 /dts-v1/;
44 #include "stm32f429.dtsi"
45 #include "stm32f469-pinctrl.dtsi"
46
47 / {
48         model = "STMicroelectronics STM32F469i-DISCO board";
49         compatible = "st,stm32f469i-disco", "st,stm32f469";
50
51         chosen {
52                 bootargs = "root=/dev/ram";
53                 stdout-path = "serial0:115200n8";
54         };
55
56         memory {
57                 reg = <0x00000000 0x1000000>;
58         };
59
60         aliases {
61                 serial0 = &usart3;
62         };
63
64         mmc_vcard: mmc_vcard {
65                 compatible = "regulator-fixed";
66                 regulator-name = "mmc_vcard";
67                 regulator-min-microvolt = <3300000>;
68                 regulator-max-microvolt = <3300000>;
69         };
70
71         soc {
72                 dma-ranges = <0xc0000000 0x0 0x10000000>;
73         };
74
75         /* This turns on vbus for otg for host mode (dwc2) */
76         vcc5v_otg: vcc5v-otg-regulator {
77                 compatible = "regulator-fixed";
78                 enable-active-high;
79                 gpio = <&gpiob 2 0>;
80                 regulator-name = "vcc5_host1";
81                 regulator-always-on;
82         };
83 };
84
85 &rcc {
86         compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc";
87 };
88
89 &clk_hse {
90         clock-frequency = <8000000>;
91 };
92
93 &rtc {
94         status = "okay";
95 };
96
97 &timers1 {
98         status = "okay";
99
100         pwm {
101                 pinctrl-0 = <&pwm1_pins>;
102                 pinctrl-names = "default";
103                 status = "okay";
104         };
105
106         timer@0 {
107                 status = "okay";
108         };
109 };
110
111 &timers3 {
112         status = "okay";
113
114         pwm {
115                 pinctrl-0 = <&pwm3_pins>;
116                 pinctrl-names = "default";
117                 status = "okay";
118         };
119
120         timer@2 {
121                 status = "okay";
122         };
123 };
124
125 &sdio {
126         status = "okay";
127         vmmc-supply = <&mmc_vcard>;
128         pinctrl-names = "default", "opendrain";
129         pinctrl-0 = <&sdio_pins>;
130         pinctrl-1 = <&sdio_pins_od>;
131         bus-width = <4>;
132 };
133
134 &usart3 {
135         pinctrl-0 = <&usart3_pins_a>;
136         pinctrl-names = "default";
137         status = "okay";
138 };
139
140 &usbotg_fs {
141         dr_mode = "host";
142         pinctrl-0 = <&usbotg_fs_pins_a>;
143         pinctrl-names = "default";
144         status = "okay";
145 };