2 * Copyright 2014 Zoltan HERPAI
3 * Zoltan HERPAI <wigyori@uid0.hu>
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public
21 * License along with this file; if not, write to the Free
22 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use,
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
39 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
50 #include "sun4i-a10.dtsi"
51 #include "sunxi-common-regulators.dtsi"
53 #include <dt-bindings/gpio/gpio.h>
54 #include <dt-bindings/input/input.h>
55 #include <dt-bindings/pinctrl/sun4i-a10.h>
58 model = "LinkSprite pcDuino";
59 compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
66 stdout-path = "serial0:115200n8";
70 compatible = "gpio-leds";
71 pinctrl-names = "default";
72 pinctrl-0 = <&led_pins_pcduino>;
75 label = "pcduino:green:tx";
76 gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
80 label = "pcduino:green:rx";
81 gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
86 compatible = "gpio-keys";
87 pinctrl-names = "default";
88 pinctrl-0 = <&key_pins_pcduino>;
94 linux,code = <KEY_BACK>;
95 gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
100 linux,code = <KEY_HOME>;
101 gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
106 linux,code = <KEY_MENU>;
107 gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
121 pinctrl-names = "default";
122 pinctrl-0 = <&emac_pins_a>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&i2c0_pins_a>;
133 compatible = "x-powers,axp209";
137 interrupt-controller;
138 #interrupt-cells = <1>;
145 phy1: ethernet-phy@1 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
153 vmmc-supply = <®_vcc3v3>;
155 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
169 led_pins_pcduino: led_pins@0 {
170 allwinner,pins = "PH15", "PH16";
171 allwinner,function = "gpio_out";
172 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
173 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
176 key_pins_pcduino: key_pins@0 {
177 allwinner,pins = "PH17", "PH18", "PH19";
178 allwinner,function = "gpio_in";
179 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
180 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
193 pinctrl-names = "default";
194 pinctrl-0 = <&uart0_pins_a>;
199 usb1_vbus-supply = <®_usb1_vbus>;
200 usb2_vbus-supply = <®_usb2_vbus>;