2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
51 #include "sun7i-a20.dtsi"
52 #include "sunxi-common-regulators.dtsi"
54 #include <dt-bindings/gpio/gpio.h>
55 #include <dt-bindings/interrupt-controller/irq.h>
56 #include <dt-bindings/pinctrl/sun4i-a10.h>
59 model = "LeMaker Banana Pi";
60 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
69 stdout-path = "serial0:115200n8";
73 compatible = "gpio-leds";
74 pinctrl-names = "default";
75 pinctrl-0 = <&led_pins_bananapi>;
78 label = "bananapi:green:usr";
79 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
83 reg_gmac_3v3: gmac-3v3 {
84 compatible = "regulator-fixed";
85 pinctrl-names = "default";
86 pinctrl-0 = <&gmac_power_pin_bananapi>;
87 regulator-name = "gmac-3v3";
88 regulator-min-microvolt = <3300000>;
89 regulator-max-microvolt = <3300000>;
90 startup-delay-us = <100000>;
92 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
109 pinctrl-names = "default";
110 pinctrl-0 = <&gmac_pins_rgmii_a>;
113 phy-supply = <®_gmac_3v3>;
116 phy1: ethernet-phy@1 {
122 pinctrl-names = "default";
123 pinctrl-0 = <&i2c0_pins_a>;
127 compatible = "x-powers,axp209";
129 interrupt-parent = <&nmi_intc>;
130 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
132 interrupt-controller;
133 #interrupt-cells = <1>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&i2c2_pins_a>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&ir0_pins_a>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
152 vmmc-supply = <®_vcc3v3>;
154 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
168 mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
169 allwinner,pins = "PH10";
170 allwinner,function = "gpio_in";
171 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
172 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
175 gmac_power_pin_bananapi: gmac_power_pin@0 {
176 allwinner,pins = "PH23";
177 allwinner,function = "gpio_out";
178 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
179 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
182 led_pins_bananapi: led_pins@0 {
183 allwinner,pins = "PH24";
184 allwinner,function = "gpio_out";
185 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
186 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&spi0_pins_a>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&uart0_pins_a>;
211 pinctrl-names = "default";
212 pinctrl-0 = <&uart3_pins_b>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&uart7_pins_a>;
223 usb1_vbus-supply = <®_usb1_vbus>;
224 usb2_vbus-supply = <®_usb2_vbus>;