2 * Copyright 2013 Oliver Schinagl
4 * Oliver Schinagl <oliver@schinagl.nl>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
51 #include "sun7i-a20.dtsi"
52 #include "sunxi-common-regulators.dtsi"
54 #include <dt-bindings/gpio/gpio.h>
55 #include <dt-bindings/interrupt-controller/irq.h>
56 #include <dt-bindings/pinctrl/sun4i-a10.h>
59 model = "Cubietech Cubietruck";
60 compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
67 stdout-path = "serial0:115200n8";
71 compatible = "gpio-leds";
72 pinctrl-names = "default";
73 pinctrl-0 = <&led_pins_cubietruck>;
76 label = "cubietruck:blue:usr";
77 gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
81 label = "cubietruck:orange:usr";
82 gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
86 label = "cubietruck:white:usr";
87 gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
91 label = "cubietruck:green:usr";
92 gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
97 compatible = "regulator-fixed";
98 pinctrl-names = "default";
99 pinctrl-0 = <&vmmc3_pin_cubietruck>;
100 regulator-name = "vmmc3";
101 regulator-min-microvolt = <3300000>;
102 regulator-max-microvolt = <3300000>;
104 gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>;
109 target-supply = <®_ahci_5v>;
114 cpu-supply = <®_dcdc2>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&gmac_pins_rgmii_a>;
132 phy1: ethernet-phy@1 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&i2c0_pins_a>;
144 interrupt-parent = <&nmi_intc>;
145 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&i2c1_pins_a>;
156 pinctrl-names = "default";
157 pinctrl-0 = <&i2c2_pins_a>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&ir0_pins_a>;
168 pinctrl-names = "default";
169 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
170 vmmc-supply = <®_vcc3v3>;
172 cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
178 pinctrl-names = "default";
179 pinctrl-0 = <&mmc3_pins_a>;
180 vmmc-supply = <®_vmmc3>;
187 compatible = "brcm,bcm4329-fmac";
188 interrupt-parent = <&pio>;
189 interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
190 interrupt-names = "host-wake";
195 /* AP6210 requires pull-up */
196 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
208 vmmc3_pin_cubietruck: vmmc3_pin@0 {
209 allwinner,pins = "PH9";
210 allwinner,function = "gpio_out";
211 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
212 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
215 ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
216 allwinner,pins = "PH12";
217 allwinner,function = "gpio_out";
218 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
219 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
222 led_pins_cubietruck: led_pins@0 {
223 allwinner,pins = "PH7", "PH11", "PH20", "PH21";
224 allwinner,function = "gpio_out";
225 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
226 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
229 usb0_vbus_pin_a: usb0_vbus_pin@0 {
230 allwinner,pins = "PH17";
231 allwinner,function = "gpio_out";
232 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
233 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
238 pinctrl-names = "default";
239 pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
244 pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
245 gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
249 #include "axp209.dtsi"
253 regulator-min-microvolt = <1000000>;
254 regulator-max-microvolt = <1450000>;
255 regulator-name = "vdd-cpu";
260 regulator-min-microvolt = <1000000>;
261 regulator-max-microvolt = <1400000>;
262 regulator-name = "vdd-int-dll";
266 regulator-name = "vdd-rtc";
271 regulator-min-microvolt = <3000000>;
272 regulator-max-microvolt = <3000000>;
273 regulator-name = "avcc";
277 pinctrl-0 = <&usb0_vbus_pin_a>;
278 gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
291 pinctrl-names = "default";
292 pinctrl-0 = <&uart0_pins_a>;
297 usb0_vbus-supply = <®_usb0_vbus>;
298 usb1_vbus-supply = <®_usb1_vbus>;
299 usb2_vbus-supply = <®_usb2_vbus>;