2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
43 #include "skeleton.dtsi"
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
46 #include <dt-bindings/pinctrl/sun4i-a10.h>
49 interrupt-parent = <&gic>;
56 compatible = "arm,cortex-a7";
62 compatible = "arm,cortex-a7";
68 compatible = "arm,cortex-a7";
74 compatible = "arm,cortex-a7";
81 compatible = "arm,armv7-timer";
82 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
83 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
84 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
85 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
95 compatible = "fixed-clock";
96 clock-frequency = <24000000>;
97 clock-output-names = "osc24M";
102 compatible = "fixed-clock";
103 clock-frequency = <32768>;
104 clock-output-names = "osc32k";
109 compatible = "allwinner,sun8i-a23-pll1-clk";
110 reg = <0x01c20000 0x4>;
112 clock-output-names = "pll1";
115 /* dummy clock until actually implemented */
118 compatible = "fixed-clock";
119 clock-frequency = <0>;
120 clock-output-names = "pll5";
125 compatible = "allwinner,sun6i-a31-pll6-clk";
126 reg = <0x01c20028 0x4>;
128 clock-output-names = "pll6", "pll6x2";
133 compatible = "fixed-factor-clock";
137 clock-output-names = "pll6d2";
140 /* dummy clock until pll6 can be reused */
143 compatible = "fixed-clock";
144 clock-frequency = <1>;
145 clock-output-names = "pll8";
148 cpu: cpu_clk@01c20050 {
150 compatible = "allwinner,sun4i-a10-cpu-clk";
151 reg = <0x01c20050 0x4>;
152 clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
153 clock-output-names = "cpu";
156 axi: axi_clk@01c20050 {
158 compatible = "allwinner,sun4i-a10-axi-clk";
159 reg = <0x01c20050 0x4>;
161 clock-output-names = "axi";
164 ahb1: ahb1_clk@01c20054 {
166 compatible = "allwinner,sun6i-a31-ahb1-clk";
167 reg = <0x01c20054 0x4>;
168 clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
169 clock-output-names = "ahb1";
172 ahb2: ahb2_clk@01c2005c {
174 compatible = "allwinner,sun8i-h3-ahb2-clk";
175 reg = <0x01c2005c 0x4>;
176 clocks = <&ahb1>, <&pll6d2>;
177 clock-output-names = "ahb2";
180 apb1: apb1_clk@01c20054 {
182 compatible = "allwinner,sun4i-a10-apb0-clk";
183 reg = <0x01c20054 0x4>;
185 clock-output-names = "apb1";
188 apb2: apb2_clk@01c20058 {
190 compatible = "allwinner,sun4i-a10-apb1-clk";
191 reg = <0x01c20058 0x4>;
192 clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
193 clock-output-names = "apb2";
196 bus_gates: clk@01c20060 {
198 compatible = "allwinner,sun8i-h3-bus-gates-clk";
199 reg = <0x01c20060 0x14>;
200 clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>;
201 clock-names = "ahb1", "ahb2", "apb1", "apb2";
202 clock-indices = <5>, <6>, <8>,
221 clock-output-names = "bus_ce", "bus_dma", "bus_mmc0",
222 "bus_mmc1", "bus_mmc2", "bus_nand",
223 "bus_sdram", "bus_gmac", "bus_ts",
224 "bus_hstimer", "bus_spi0",
225 "bus_spi1", "bus_otg",
226 "bus_otg_ehci0", "bus_ehci1",
227 "bus_ehci2", "bus_ehci3",
228 "bus_otg_ohci0", "bus_ohci1",
229 "bus_ohci2", "bus_ohci3", "bus_ve",
230 "bus_lcd0", "bus_lcd1", "bus_deint",
231 "bus_csi", "bus_tve", "bus_hdmi",
232 "bus_de", "bus_gpu", "bus_msgbox",
233 "bus_spinlock", "bus_codec",
234 "bus_spdif", "bus_pio", "bus_ths",
235 "bus_i2s0", "bus_i2s1", "bus_i2s2",
236 "bus_i2c0", "bus_i2c1", "bus_i2c2",
237 "bus_uart0", "bus_uart1",
238 "bus_uart2", "bus_uart3",
239 "bus_scr", "bus_ephy", "bus_dbg";
242 mmc0_clk: clk@01c20088 {
244 compatible = "allwinner,sun4i-a10-mmc-clk";
245 reg = <0x01c20088 0x4>;
246 clocks = <&osc24M>, <&pll6 0>, <&pll8>;
247 clock-output-names = "mmc0",
252 mmc1_clk: clk@01c2008c {
254 compatible = "allwinner,sun4i-a10-mmc-clk";
255 reg = <0x01c2008c 0x4>;
256 clocks = <&osc24M>, <&pll6 0>, <&pll8>;
257 clock-output-names = "mmc1",
262 mmc2_clk: clk@01c20090 {
264 compatible = "allwinner,sun4i-a10-mmc-clk";
265 reg = <0x01c20090 0x4>;
266 clocks = <&osc24M>, <&pll6 0>, <&pll8>;
267 clock-output-names = "mmc2",
272 usb_clk: clk@01c200cc {
275 compatible = "allwinner,sun8i-h3-usb-clk";
276 reg = <0x01c200cc 0x4>;
278 clock-output-names = "usb_phy0", "usb_phy1",
279 "usb_phy2", "usb_phy3",
280 "usb_ohci0", "usb_ohci1",
281 "usb_ohci2", "usb_ohci3";
284 mbus_clk: clk@01c2015c {
286 compatible = "allwinner,sun8i-a23-mbus-clk";
287 reg = <0x01c2015c 0x4>;
288 clocks = <&osc24M>, <&pll6 1>, <&pll5>;
289 clock-output-names = "mbus";
293 compatible = "fixed-factor-clock";
298 clock-output-names = "apb0";
301 apb0_gates: clk@01f01428 {
302 compatible = "allwinner,sun8i-h3-apb0-gates-clk",
303 "allwinner,sun4i-a10-gates-clk";
304 reg = <0x01f01428 0x4>;
307 clock-indices = <0>, <1>;
308 clock-output-names = "apb0_pio", "apb0_ir";
311 ir_clk: ir_clk@01f01454 {
312 compatible = "allwinner,sun4i-a10-mod0-clk";
313 reg = <0x01f01454 0x4>;
315 clocks = <&osc32k>, <&osc24M>;
316 clock-output-names = "ir";
321 compatible = "simple-bus";
322 #address-cells = <1>;
326 dma: dma-controller@01c02000 {
327 compatible = "allwinner,sun8i-h3-dma";
328 reg = <0x01c02000 0x1000>;
329 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
330 clocks = <&bus_gates 6>;
331 resets = <&ahb_rst 6>;
336 compatible = "allwinner,sun5i-a13-mmc";
337 reg = <0x01c0f000 0x1000>;
338 clocks = <&bus_gates 8>,
346 resets = <&ahb_rst 8>;
348 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
350 #address-cells = <1>;
355 compatible = "allwinner,sun5i-a13-mmc";
356 reg = <0x01c10000 0x1000>;
357 clocks = <&bus_gates 9>,
365 resets = <&ahb_rst 9>;
367 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
369 #address-cells = <1>;
374 compatible = "allwinner,sun5i-a13-mmc";
375 reg = <0x01c11000 0x1000>;
376 clocks = <&bus_gates 10>,
384 resets = <&ahb_rst 10>;
386 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
388 #address-cells = <1>;
392 usbphy: phy@01c19400 {
393 compatible = "allwinner,sun8i-h3-usb-phy";
394 reg = <0x01c19400 0x2c>,
399 reg-names = "phy_ctrl",
404 clocks = <&usb_clk 8>,
408 clock-names = "usb0_phy",
412 resets = <&usb_clk 0>,
416 reset-names = "usb0_reset",
424 ehci1: usb@01c1b000 {
425 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
426 reg = <0x01c1b000 0x100>;
427 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
428 clocks = <&bus_gates 25>, <&bus_gates 29>;
429 resets = <&ahb_rst 25>, <&ahb_rst 29>;
435 ohci1: usb@01c1b400 {
436 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
437 reg = <0x01c1b400 0x100>;
438 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
439 clocks = <&bus_gates 29>, <&bus_gates 25>,
441 resets = <&ahb_rst 29>, <&ahb_rst 25>;
447 ehci2: usb@01c1c000 {
448 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
449 reg = <0x01c1c000 0x100>;
450 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
451 clocks = <&bus_gates 26>, <&bus_gates 30>;
452 resets = <&ahb_rst 26>, <&ahb_rst 30>;
458 ohci2: usb@01c1c400 {
459 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
460 reg = <0x01c1c400 0x100>;
461 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
462 clocks = <&bus_gates 30>, <&bus_gates 26>,
464 resets = <&ahb_rst 30>, <&ahb_rst 26>;
470 ehci3: usb@01c1d000 {
471 compatible = "allwinner,sun8i-h3-ehci", "generic-ehci";
472 reg = <0x01c1d000 0x100>;
473 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
474 clocks = <&bus_gates 27>, <&bus_gates 31>;
475 resets = <&ahb_rst 27>, <&ahb_rst 31>;
481 ohci3: usb@01c1d400 {
482 compatible = "allwinner,sun8i-h3-ohci", "generic-ohci";
483 reg = <0x01c1d400 0x100>;
484 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
485 clocks = <&bus_gates 31>, <&bus_gates 27>,
487 resets = <&ahb_rst 31>, <&ahb_rst 27>;
493 pio: pinctrl@01c20800 {
494 compatible = "allwinner,sun8i-h3-pinctrl";
495 reg = <0x01c20800 0x400>;
496 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
497 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
498 clocks = <&bus_gates 69>;
501 interrupt-controller;
502 #interrupt-cells = <3>;
504 uart0_pins_a: uart0@0 {
505 allwinner,pins = "PA4", "PA5";
506 allwinner,function = "uart0";
507 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
508 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
511 mmc0_pins_a: mmc0@0 {
512 allwinner,pins = "PF0", "PF1", "PF2", "PF3",
514 allwinner,function = "mmc0";
515 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
516 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
519 mmc0_cd_pin: mmc0_cd_pin@0 {
520 allwinner,pins = "PF6";
521 allwinner,function = "gpio_in";
522 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
523 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
526 mmc1_pins_a: mmc1@0 {
527 allwinner,pins = "PG0", "PG1", "PG2", "PG3",
529 allwinner,function = "mmc1";
530 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
531 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
535 ahb_rst: reset@01c202c0 {
537 compatible = "allwinner,sun6i-a31-ahb1-reset";
538 reg = <0x01c202c0 0xc>;
541 apb1_rst: reset@01c202d0 {
543 compatible = "allwinner,sun6i-a31-clock-reset";
544 reg = <0x01c202d0 0x4>;
547 apb2_rst: reset@01c202d8 {
549 compatible = "allwinner,sun6i-a31-clock-reset";
550 reg = <0x01c202d8 0x4>;
554 compatible = "allwinner,sun4i-a10-timer";
555 reg = <0x01c20c00 0xa0>;
556 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
557 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
561 wdt0: watchdog@01c20ca0 {
562 compatible = "allwinner,sun6i-a31-wdt";
563 reg = <0x01c20ca0 0x20>;
564 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
567 uart0: serial@01c28000 {
568 compatible = "snps,dw-apb-uart";
569 reg = <0x01c28000 0x400>;
570 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
573 clocks = <&bus_gates 112>;
574 resets = <&apb2_rst 16>;
575 dmas = <&dma 6>, <&dma 6>;
576 dma-names = "rx", "tx";
580 uart1: serial@01c28400 {
581 compatible = "snps,dw-apb-uart";
582 reg = <0x01c28400 0x400>;
583 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
586 clocks = <&bus_gates 113>;
587 resets = <&apb2_rst 17>;
588 dmas = <&dma 7>, <&dma 7>;
589 dma-names = "rx", "tx";
593 uart2: serial@01c28800 {
594 compatible = "snps,dw-apb-uart";
595 reg = <0x01c28800 0x400>;
596 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
599 clocks = <&bus_gates 114>;
600 resets = <&apb2_rst 18>;
601 dmas = <&dma 8>, <&dma 8>;
602 dma-names = "rx", "tx";
606 uart3: serial@01c28c00 {
607 compatible = "snps,dw-apb-uart";
608 reg = <0x01c28c00 0x400>;
609 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
612 clocks = <&bus_gates 115>;
613 resets = <&apb2_rst 19>;
614 dmas = <&dma 9>, <&dma 9>;
615 dma-names = "rx", "tx";
619 gic: interrupt-controller@01c81000 {
620 compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
621 reg = <0x01c81000 0x1000>,
625 interrupt-controller;
626 #interrupt-cells = <3>;
627 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
631 compatible = "allwinner,sun6i-a31-rtc";
632 reg = <0x01f00000 0x54>;
633 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
634 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
637 apb0_reset: reset@01f014b0 {
638 reg = <0x01f014b0 0x4>;
639 compatible = "allwinner,sun6i-a31-clock-reset";
644 compatible = "allwinner,sun5i-a13-ir";
645 clocks = <&apb0_gates 1>, <&ir_clk>;
646 clock-names = "apb", "ir";
647 resets = <&apb0_reset 1>;
648 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
649 reg = <0x01f02000 0x40>;
653 r_pio: pinctrl@01f02c00 {
654 compatible = "allwinner,sun8i-h3-r-pinctrl";
655 reg = <0x01f02c00 0x400>;
656 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
657 clocks = <&apb0_gates 0>;
658 resets = <&apb0_reset 0>;
661 interrupt-controller;
662 #interrupt-cells = <3>;
665 allwinner,pins = "PL11";
666 allwinner,function = "s_cir_rx";
667 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
668 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;