]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/tegra20-colibri.dts
ARM64: zynqmp: Add missing mmc aliases
[u-boot] / arch / arm / dts / tegra20-colibri.dts
1 /dts-v1/;
2
3 #include "tegra20.dtsi"
4
5 / {
6         model = "Toradex Colibri T20";
7         compatible = "toradex,colibri_t20", "nvidia,tegra20";
8
9         chosen {
10                 stdout-path = &uarta;
11         };
12
13         aliases {
14                 i2c0 = "/i2c@7000d000";
15                 i2c1 = "/i2c@7000c000";
16                 i2c2 = "/i2c@7000c400";
17                 usb0 = "/usb@c5008000";
18                 usb1 = "/usb@c5000000";
19                 usb2 = "/usb@c5004000";
20                 sdhci0 = "/sdhci@c8000600";
21         };
22
23         host1x@50000000 {
24                 status = "okay";
25                 dc@54200000 {
26                         status = "okay";
27                         rgb {
28                                 status = "okay";
29                                 nvidia,panel = <&lcd_panel>;
30                         };
31                 };
32         };
33
34         usb@c5000000 {
35                 statuc = "okay";
36                 dr_mode = "otg";
37         };
38
39         usb@c5004000 {
40                 statuc = "okay";
41                 /* VBUS_LAN */
42                 nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
43                 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
44         };
45
46         usb@c5008000 {
47                 statuc = "okay";
48                 /* USBH_PEN */
49                 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
50         };
51
52         nand-controller@70008000 {
53                 nvidia,wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
54                 nvidia,width = <8>;
55                 nvidia,timing = <15 100 25 80 25 10 15 10 100>;
56
57                 nand@0 {
58                         reg = <0>;
59                         compatible = "nand-flash";
60                 };
61         };
62
63         /*
64          * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
65          * board)
66          */
67         i2c@7000c000 {
68                 status = "okay";
69                 clock-frequency = <100000>;
70         };
71
72         /* GEN2_I2C: unused */
73
74         /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
75         i2c@7000c400 {
76                 status = "okay";
77                 clock-frequency = <100000>;
78         };
79
80         /*
81          * PWR_I2C: power I2C to PMIC and temperature sensor
82          */
83         i2c@7000d000 {
84                 status = "okay";
85                 clock-frequency = <100000>;
86         };
87
88         sdhci@c8000600 {
89                 status = "okay";
90                 bus-width = <4>;
91                 cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
92         };
93
94         clocks {
95                 compatible = "simple-bus";
96                 #address-cells = <1>;
97                 #size-cells = <0>;
98
99                 clk32k_in: clock@0 {
100                         compatible = "fixed-clock";
101                         reg=<0>;
102                         #clock-cells = <0>;
103                         clock-frequency = <32768>;
104                 };
105         };
106
107         pwm: pwm@7000a000 {
108                 status = "okay";
109         };
110
111         lcd_panel: panel {
112                 clock = <25175000>;
113                 xres = <640>;
114                 yres = <480>;
115                 left-margin = <48>;     /* horizontal back porch */
116                 right-margin = <16>;    /* horizontal front porch */
117                 hsync-len = <96>;
118                 lower-margin = <11>;    /* vertical front porch */
119                 upper-margin = <31>;    /* vertical back porch */
120                 vsync-len = <2>;
121                 hsync-active-high;
122                 vsync-active-high;
123                 nvidia,bits-per-pixel = <16>;
124                 nvidia,pwm = <&pwm 0 0>;
125                 nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
126                 nvidia,panel-timings = <0 0 0 0>;
127         };
128 };