]> git.sur5r.net Git - u-boot/blob - arch/arm/dts/tegra20-harmony.dts
arm: socfpga: Fix typos in DT files (environmnet -> environment)
[u-boot] / arch / arm / dts / tegra20-harmony.dts
1 /dts-v1/;
2
3 #include "tegra20.dtsi"
4
5 / {
6         model = "NVIDIA Tegra20 Harmony evaluation board";
7         compatible = "nvidia,harmony", "nvidia,tegra20";
8
9         chosen {
10                 stdout-path = &uartd;
11         };
12
13         aliases {
14                 usb0 = "/usb@c5008000";
15                 usb1 = "/usb@c5004000";
16                 sdhci0 = "/sdhci@c8000600";
17                 sdhci1 = "/sdhci@c8000200";
18         };
19
20         memory {
21                 reg = <0x00000000 0x40000000>;
22         };
23
24         host1x@50000000 {
25                 status = "okay";
26                 dc@54200000 {
27                         status = "okay";
28                         rgb {
29                                 status = "okay";
30                                 nvidia,panel = <&lcd_panel>;
31                         };
32                 };
33         };
34
35         serial@70006300 {
36                 clock-frequency = < 216000000 >;
37         };
38
39         nand-controller@70008000 {
40                 nvidia,wp-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
41                 nvidia,width = <8>;
42                 nvidia,timing = <26 100 20 80 20 10 12 10 70>;
43                 nand@0 {
44                         reg = <0>;
45                         compatible = "hynix,hy27uf4g2b", "nand-flash";
46                 };
47         };
48
49         usb@c5004000 {
50                 statuc = "okay";
51                 nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) 0>;
52         };
53
54         usb@c5008000 {
55                 status = "okay";
56         };
57
58         sdhci@c8000200 {
59                 status = "okay";
60                 cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
61                 wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
62                 power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
63                 bus-width = <4>;
64         };
65
66         sdhci@c8000600 {
67                 status = "okay";
68                 cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
69                 wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
70                 power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
71                 bus-width = <8>;
72         };
73
74         clocks {
75                 compatible = "simple-bus";
76                 #address-cells = <1>;
77                 #size-cells = <0>;
78
79                 clk32k_in: clock@0 {
80                         compatible = "fixed-clock";
81                         reg=<0>;
82                         #clock-cells = <0>;
83                         clock-frequency = <32768>;
84                 };
85         };
86
87         pwm: pwm@7000a000 {
88                 status = "okay";
89         };
90
91         lcd_panel: panel {
92                 clock = <42430000>;
93                 xres = <1024>;
94                 yres = <600>;
95                 left-margin = <138>;
96                 right-margin = <34>;
97                 hsync-len = <136>;
98                 lower-margin = <4>;
99                 upper-margin = <21>;
100                 vsync-len = <4>;
101                 hsync-active-high;
102                 vsyncx-active-high;
103                 nvidia,bits-per-pixel = <16>;
104                 nvidia,pwm = <&pwm 0 0>;
105                 nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(B, 5)
106                                                         GPIO_ACTIVE_HIGH>;
107                 nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2)
108                                                         GPIO_ACTIVE_HIGH>;
109                 nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0)
110                                                         GPIO_ACTIVE_HIGH>;
111                 nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6)
112                                                         GPIO_ACTIVE_HIGH>;
113                 nvidia,panel-timings = <0 0 200 0 0>;
114         };
115 };