git.sur5r.net Git - u-boot/blob - arch/arm/dts/tegra30-tamonten.dtsi

   1 #include "tegra30.dtsi"
   2
   3 / {
   4         model = "Avionic Design Tamonten NG";
   5         compatible = "ad,tamonten-ng", "nvidia,tegra30";
   6
   7         memory {
   8                 reg = <0x80000000 0x40000000>;
   9         };
  10
  11         chosen {
  12                 stdout-path = &uartd;
  13         };
  14
  15         aliases {
  16                 i2c0 = "/i2c@7000c000";
  17                 i2c1 = "/i2c@7000c700";
  18                 i2c2 = "/i2c@7000c400";
  19                 i2c3 = "/i2c@7000c500";
  20                 i2c4 = "/i2c@7000d000";
  21                 sdhci0 = "/sdhci@78000600";
  22                 sdhci1 = "/sdhci@78000400";
  23                 sdhci2 = "/sdhci@78000000";
  24                 usb0 = "/usb@7d008000";
  25         };
  26
  27         /* GEN1 */
  28         i2c@7000c000 {
  29                 status = "okay";
  30                 clock-frequency = <100000>;
  31         };
  32
  33         /* GEN2 */
  34         i2c@7000c400 {
  35                 clock-frequency = <100000>;
  36         };
  37
  38         /* CAM */
  39         i2c@7000c500 {
  40                 status = "okay";
  41                 clock-frequency = <100000>;
  42         };
  43
  44         /* DDC */
  45         i2c@7000c700 {
  46                 status = "okay";
  47                 clock-frequency = <100000>;
  48         };
  49
  50         /* PWR */
  51         i2c@7000d000 {
  52                 status = "okay";
  53                 clock-frequency = <100000>;
  54         };
  55
  56         /* SD slot on the base board */
  57         sdhci@78000400 {
  58                 cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
  59                 wp-gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
  60                 bus-width = <4>;
  61         };
  62
  63         /* EMMC on the COM module */
  64         sdhci@78000600 {
  65                 status = "okay";
  66                 bus-width = <8>;
  67         };
  68
  69         usb@7d008000 {
  70                 status = "okay";
  71         };
  72
  73 };