2 * dts file for Xilinx ZynqMP zc1751-xm016-dc2
4 * (C) Copyright 2015, Xilinx, Inc.
6 * Michal Simek <michal.simek@xilinx.com>
8 * SPDX-License-Identifier: GPL-2.0+
13 #include "zynqmp.dtsi"
14 #include "zynqmp-clk.dtsi"
17 model = "ZynqMP zc1751-xm016-dc2 RevA";
18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
35 bootargs = "earlycon";
36 stdout-path = "serial0:115200n8";
40 device_type = "memory";
41 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
53 /* fpd_dma clk 667MHz, lpd_dma 500MHz */
56 xlnx,include-sg; /* for testing purpose */
57 xlnx,overfetch; /* for testing purpose */
58 xlnx,ratectrl = <0>; /* for testing purpose */
59 xlnx,src-issue = <31>;
64 xlnx,ratectrl = <100>; /* for testing purpose */
65 xlnx,src-issue = <4>; /* for testing purpose */
74 xlnx,include-sg; /* for testing purpose */
83 xlnx,include-sg; /* for testing purpose */
92 xlnx,include-sg; /* for testing purpose */
97 local-mac-address = [00 0a 35 00 02 90];
99 phy-mode = "rgmii-id";
102 ti,rx-internal-delay = <0x8>;
103 ti,tx-internal-delay = <0xa>;
104 ti,fifo-depth = <0x1>;
114 clock-frequency = <400000>;
116 tca6416_u26: gpio@20 {
117 compatible = "ti,tca6416";
121 /* IRQ not connected */
125 compatible = "dallas,ds1339";
135 partition@0 { /* for testing purpose */
136 label = "nand-fsbl-uboot";
137 reg = <0x0 0x0 0x400000>;
139 partition@1 { /* for testing purpose */
140 label = "nand-linux";
141 reg = <0x0 0x400000 0x1400000>;
143 partition@2 { /* for testing purpose */
144 label = "nand-device-tree";
145 reg = <0x0 0x1800000 0x400000>;
147 partition@3 { /* for testing purpose */
148 label = "nand-rootfs";
149 reg = <0x0 0x1C00000 0x1400000>;
151 partition@4 { /* for testing purpose */
152 label = "nand-bitstream";
153 reg = <0x0 0x3000000 0x400000>;
155 partition@5 { /* for testing purpose */
157 reg = <0x0 0x3400000 0xFCC00000>;
160 partition@6 { /* for testing purpose */
161 label = "nand1-fsbl-uboot";
162 reg = <0x1 0x0 0x400000>;
164 partition@7 { /* for testing purpose */
165 label = "nand1-linux";
166 reg = <0x1 0x400000 0x1400000>;
168 partition@8 { /* for testing purpose */
169 label = "nand1-device-tree";
170 reg = <0x1 0x1800000 0x400000>;
172 partition@9 { /* for testing purpose */
173 label = "nand1-rootfs";
174 reg = <0x1 0x1C00000 0x1400000>;
176 partition@10 { /* for testing purpose */
177 label = "nand1-bitstream";
178 reg = <0x1 0x3000000 0x400000>;
180 partition@11 { /* for testing purpose */
181 label = "nand1-misc";
182 reg = <0x1 0x3400000 0xFCC00000>;
193 spi0_flash0: spi0_flash0@0 {
194 compatible = "m25p80";
195 #address-cells = <1>;
197 spi-max-frequency = <50000000>;
200 spi0_flash0@00000000 {
201 label = "spi0_flash0";
202 reg = <0x0 0x100000>;
210 spi1_flash0: spi1_flash0@0 {
211 compatible = "mtd_dataflash";
212 #address-cells = <1>;
214 spi-max-frequency = <20000000>;
217 spi1_flash0@00000000 {
218 label = "spi1_flash0";
224 /* ULPI SMSC USB3320 */