3 * Texas Instruments, <www.ti.com>
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 #ifndef _OMAP24XX_I2C_H_
24 #define _OMAP24XX_I2C_H_
26 #define I2C_BASE1 0x48070000
27 #define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */
29 #define I2C_DEFAULT_BASE I2C_BASE1
32 unsigned short rev; /* 0x00 */
34 unsigned short ie; /* 0x04 */
36 unsigned short stat; /* 0x08 */
38 unsigned short iv; /* 0x0C */
40 unsigned short syss; /* 0x10 */
41 unsigned short res4p1;
42 unsigned short buf; /* 0x14 */
44 unsigned short cnt; /* 0x18 */
46 unsigned short data; /* 0x1C */
48 unsigned short sysc; /* 0x20 */
50 unsigned short con; /* 0x24 */
52 unsigned short oa; /* 0x28 */
54 unsigned short sa; /* 0x2C */
56 unsigned short psc; /* 0x30 */
58 unsigned short scll; /* 0x34 */
60 unsigned short sclh; /* 0x38 */
62 unsigned short systest; /* 0x3c */
70 /* I2C Interrupt Enable Register (I2C_IE): */
71 #define I2C_IE_GC_IE (1 << 5)
72 #define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
73 #define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
74 #define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
75 #define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
76 #define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
78 /* I2C Status Register (I2C_STAT): */
80 #define I2C_STAT_SBD (1 << 15) /* Single byte data */
81 #define I2C_STAT_BB (1 << 12) /* Bus busy */
82 #define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
83 #define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
84 #define I2C_STAT_AAS (1 << 9) /* Address as slave */
85 #define I2C_STAT_GC (1 << 5)
86 #define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
87 #define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
88 #define I2C_STAT_ARDY (1 << 2) /* Register access ready */
89 #define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
90 #define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
93 /* I2C Interrupt Code Register (I2C_INTCODE): */
95 #define I2C_INTCODE_MASK 7
96 #define I2C_INTCODE_NONE 0
97 #define I2C_INTCODE_AL 1 /* Arbitration lost */
98 #define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
99 #define I2C_INTCODE_ARDY 3 /* Register access ready */
100 #define I2C_INTCODE_RRDY 4 /* Rcv data ready */
101 #define I2C_INTCODE_XRDY 5 /* Xmit data ready */
103 /* I2C Buffer Configuration Register (I2C_BUF): */
105 #define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
106 #define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
108 /* I2C Configuration Register (I2C_CON): */
110 #define I2C_CON_EN (1 << 15) /* I2C module enable */
111 #define I2C_CON_BE (1 << 14) /* Big endian mode */
112 #define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
113 #define I2C_CON_MST (1 << 10) /* Master/slave mode */
114 #define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
115 #define I2C_CON_XA (1 << 8) /* Expand address */
116 #define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
117 #define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
119 /* I2C System Test Register (I2C_SYSTEST): */
121 #define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
122 #define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */
123 #define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
124 #define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
125 #define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
126 #define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
127 #define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
128 #define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
130 /* These values were copied from omap3, include/asm-arm/arch-omap3/i2c.h. */
131 #define OMAP_I2C_STANDARD 100000
132 #define OMAP_I2C_FAST_MODE 400000
133 #define OMAP_I2C_HIGH_SPEED 3400000
135 #define SYSTEM_CLOCK_12 12000000
136 #define SYSTEM_CLOCK_13 13000000
137 #define SYSTEM_CLOCK_192 19200000
138 #define SYSTEM_CLOCK_96 96000000
141 #define I2C_IP_CLK SYSTEM_CLOCK_96
144 #ifndef I2C_INTERNAL_SAMPLING_CLK
145 #define I2C_INTERNAL_SAMPLING_CLK 19200000
148 /* These are the trim values for standard and fast speed */
149 #ifndef I2C_FASTSPEED_SCLL_TRIM
150 #define I2C_FASTSPEED_SCLL_TRIM 6
152 #ifndef I2C_FASTSPEED_SCLH_TRIM
153 #define I2C_FASTSPEED_SCLH_TRIM 6
156 /* These are the trim values for high speed */
157 #ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
158 #define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
160 #ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
161 #define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
163 #ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
164 #define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
166 #ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
167 #define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
170 #define I2C_PSC_MAX 0x0f
171 #define I2C_PSC_MIN 0x00