2 * Copyright 2015 Freescale Semiconductor, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef __FSL_SECURE_BOOT_H
8 #define __FSL_SECURE_BOOT_H
10 #ifdef CONFIG_CHAIN_OF_TRUST
11 #define CONFIG_CMD_ESBC_VALIDATE
12 #define CONFIG_FSL_SEC_MON
13 #define CONFIG_SHA_HW_ACCEL
14 #define CONFIG_SHA_PROG_HW_ACCEL
16 #define CONFIG_SPL_BOARD_INIT
17 #ifdef CONFIG_SPL_BUILD
19 * Define the key hash for U-Boot here if public/private key pair used to
20 * sign U-boot are different from the SRK hash put in the fuse
21 * Example of defining KEY_HASH is
22 * #define CONFIG_SPL_UBOOT_KEY_HASH \
23 * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
24 * else leave it defined as NULL
27 #define CONFIG_SPL_UBOOT_KEY_HASH NULL
28 #endif /* ifdef CONFIG_SPL_BUILD */
30 #define CONFIG_KEY_REVOCATION
32 #ifndef CONFIG_SPL_BUILD
33 #define CONFIG_CMD_BLOB
34 #define CONFIG_CMD_HASH
35 #ifndef CONFIG_SYS_RAMBOOT
36 /* The key used for verification of next level images
37 * is picked up from an Extension Table which has
38 * been verified by the ISBC (Internal Secure boot Code)
39 * in boot ROM of the SoC.
40 * The feature is only applicable in case of NOR boot and is
41 * not applicable in case of RAMBOOT (NAND, SD, SPI).
42 * For LS, this feature is available for all device if IE Table
43 * is copied to XIP memory
44 * Also, for LS, ISBC doesn't verify this table.
46 #define CONFIG_FSL_ISBC_KEY_EXT
50 #if defined(CONFIG_FSL_LAYERSCAPE)
52 * For fsl layerscape based platforms, ESBC image Address in Header
55 #define CONFIG_ESBC_ADDR_64BIT
58 #ifdef CONFIG_ARCH_LS2080A
59 #define CONFIG_EXTRA_ENV \
60 "setenv fdt_high 0xa0000000;" \
61 "setenv initrd_high 0xcfffffff;" \
62 "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
64 #define CONFIG_EXTRA_ENV \
65 "setenv fdt_high 0xffffffff;" \
66 "setenv initrd_high 0xffffffff;" \
67 "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';"
70 /* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from
71 * Non-XIP Memory (Nand/SD)*/
72 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \
73 defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT)
74 #define CONFIG_BOOTSCRIPT_COPY_RAM
76 /* The address needs to be modified according to NOR, NAND, SD and
79 #ifdef CONFIG_FSL_LSCH3
80 #define CONFIG_BS_HDR_ADDR_DEVICE 0x580d00000
81 #define CONFIG_BS_ADDR_DEVICE 0x580e00000
82 #define CONFIG_BS_HDR_ADDR_RAM 0xa0d00000
83 #define CONFIG_BS_ADDR_RAM 0xa0e00000
84 #define CONFIG_BS_HDR_SIZE 0x00002000
85 #define CONFIG_BS_SIZE 0x00001000
88 /* For SD boot address and size are assigned in terms of sector
89 * offset and no. of sectors respectively.
91 #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A)
92 #define CONFIG_BS_HDR_ADDR_DEVICE 0x00000920
94 #define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900
96 #define CONFIG_BS_ADDR_DEVICE 0x00000940
97 #define CONFIG_BS_HDR_SIZE 0x00000010
98 #define CONFIG_BS_SIZE 0x00000008
99 #elif defined(CONFIG_NAND_BOOT)
100 #define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000
101 #define CONFIG_BS_ADDR_DEVICE 0x00802000
102 #define CONFIG_BS_HDR_SIZE 0x00002000
103 #define CONFIG_BS_SIZE 0x00001000
104 #elif defined(CONFIG_QSPI_BOOT)
105 #ifdef CONFIG_ARCH_LS1046A
106 #define CONFIG_BS_HDR_ADDR_DEVICE 0x40780000
107 #define CONFIG_BS_ADDR_DEVICE 0x40800000
108 #elif defined(CONFIG_ARCH_LS1012A)
109 #define CONFIG_BS_HDR_ADDR_DEVICE 0x400c0000
110 #define CONFIG_BS_ADDR_DEVICE 0x40060000
112 #error "Platform not supported"
114 #define CONFIG_BS_HDR_SIZE 0x00002000
115 #define CONFIG_BS_SIZE 0x00001000
116 #else /* Default NOR Boot */
117 #define CONFIG_BS_HDR_ADDR_DEVICE 0x600a0000
118 #define CONFIG_BS_ADDR_DEVICE 0x60060000
119 #define CONFIG_BS_HDR_SIZE 0x00002000
120 #define CONFIG_BS_SIZE 0x00001000
122 #define CONFIG_BS_HDR_ADDR_RAM 0x81000000
123 #define CONFIG_BS_ADDR_RAM 0x81020000
126 #ifdef CONFIG_BOOTSCRIPT_COPY_RAM
127 #define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
128 #define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM
130 #define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE
131 /* BOOTSCRIPT_ADDR is not required */
134 #ifdef CONFIG_FSL_LS_PPA
135 /* Define the key hash here if SRK used for signing PPA image is
136 * different from SRK hash put in SFP used for U-Boot.
138 * #define PPA_KEY_HASH \
139 * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b"
141 #define PPA_KEY_HASH NULL
142 #endif /* ifdef CONFIG_FSL_LS_PPA */
144 #include <config_fsl_chain_trust.h>
145 #endif /* #ifndef CONFIG_SPL_BUILD */
146 #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */