2 * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
4 * SPDX-License-Identifier: GPL-2.0+
6 #ifndef __ASM_ARCH_MXC_MXC_I2C_H__
7 #define __ASM_ARCH_MXC_MXC_I2C_H__
8 #include <asm/imx-common/iomux-v3.h>
11 iomux_v3_cfg_t i2c_mode;
12 iomux_v3_cfg_t gpio_mode;
17 struct i2c_pads_info {
18 struct i2c_pin_ctrl scl;
19 struct i2c_pin_ctrl sda;
23 * Information about i2c controller
24 * struct mxc_i2c_bus - information about the i2c[x] bus
25 * @index: i2c bus index
26 * @base: Address of I2C bus controller
27 * @driver_data: Flags for different platforms, such as I2C_QUIRK_FLAG.
28 * @speed: Speed of I2C bus
29 * @pads_info: pinctrl info for this i2c bus, will be used when pinctrl is ok.
30 * The following two is only to be compatible with non-DM part.
31 * @idle_bus_fn: function to force bus idle
32 * @idle_bus_data: parameter for idle_bus_fun
36 * board file can use this index to locate which i2c_pads_info is for
37 * i2c_idle_bus. When pinmux is implement, this entry can be
38 * discarded. Here we do not use dev->seq, because we do not want to
39 * export device to board file.
45 struct i2c_pads_info *pads_info;
47 int (*idle_bus_fn)(void *p);
52 #if defined(CONFIG_MX6QDL)
53 #define I2C_PADS(name, scl_i2c, scl_gpio, scl_gp, sda_i2c, sda_gpio, sda_gp) \
54 struct i2c_pads_info mx6q_##name = { \
56 .i2c_mode = MX6Q_##scl_i2c, \
57 .gpio_mode = MX6Q_##scl_gpio, \
61 .i2c_mode = MX6Q_##sda_i2c, \
62 .gpio_mode = MX6Q_##sda_gpio, \
66 struct i2c_pads_info mx6s_##name = { \
68 .i2c_mode = MX6DL_##scl_i2c, \
69 .gpio_mode = MX6DL_##scl_gpio, \
73 .i2c_mode = MX6DL_##sda_i2c, \
74 .gpio_mode = MX6DL_##sda_gpio, \
80 #define I2C_PADS_INFO(name) \
81 (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) ? \
82 &mx6q_##name : &mx6s_##name
85 int setup_i2c(unsigned i2c_index, int speed, int slave_addr,
86 struct i2c_pads_info *p);
87 void bus_i2c_init(int index, int speed, int slave_addr,
88 int (*idle_bus_fn)(void *p), void *p);
89 int force_idle_bus(void *priv);
90 int i2c_idle_bus(struct mxc_i2c_bus *i2c_bus);