git.sur5r.net Git - u-boot/blob - arch/arm/mach-at91/armv7/clock.c

   1 /*
   2  * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
   3  *
   4  * Copyright (C) 2005 David Brownell
   5  * Copyright (C) 2005 Ivan Kokshaysky
   6  * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   7  * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
   8  * Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #include <common.h>
  14 #include <asm/errno.h>
  15 #include <asm/io.h>
  16 #include <asm/arch/hardware.h>
  17 #include <asm/arch/at91_pmc.h>
  18 #include <asm/arch/clk.h>
  19
  20 #if !defined(CONFIG_AT91FAMILY)
  21 # error You need to define CONFIG_AT91FAMILY in your board config!
  22 #endif
  23
  24 DECLARE_GLOBAL_DATA_PTR;
  25
  26 static unsigned long at91_css_to_rate(unsigned long css)
  27 {
  28         switch (css) {
  29         case AT91_PMC_MCKR_CSS_SLOW:
  30                 return CONFIG_SYS_AT91_SLOW_CLOCK;
  31         case AT91_PMC_MCKR_CSS_MAIN:
  32                 return gd->arch.main_clk_rate_hz;
  33         case AT91_PMC_MCKR_CSS_PLLA:
  34                 return gd->arch.plla_rate_hz;
  35         }
  36
  37         return 0;
  38 }
  39
  40 static u32 at91_pll_rate(u32 freq, u32 reg)
  41 {
  42         unsigned mul, div;
  43
  44         div = reg & 0xff;
  45         mul = (reg >> 18) & 0x7f;
  46         if (div && mul) {
  47                 freq /= div;
  48                 freq *= mul + 1;
  49         } else {
  50                 freq = 0;
  51         }
  52
  53         return freq;
  54 }
  55
  56 int at91_clock_init(unsigned long main_clock)
  57 {
  58         unsigned freq, mckr;
  59         struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
  60 #ifndef CONFIG_SYS_AT91_MAIN_CLOCK
  61         unsigned tmp;
  62         /*
  63          * When the bootloader initialized the main oscillator correctly,
  64          * there's no problem using the cycle counter.  But if it didn't,
  65          * or when using oscillator bypass mode, we must be told the speed
  66          * of the main clock.
  67          */
  68         if (!main_clock) {
  69                 do {
  70                         tmp = readl(&pmc->mcfr);
  71                 } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
  72                 tmp &= AT91_PMC_MCFR_MAINF_MASK;
  73                 main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
  74         }
  75 #endif
  76         gd->arch.main_clk_rate_hz = main_clock;
  77
  78         /* report if PLLA is more than mildly overclocked */
  79         gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
  80
  81         /*
  82          * MCK and CPU derive from one of those primary clocks.
  83          * For now, assume this parentage won't change.
  84          */
  85         mckr = readl(&pmc->mckr);
  86
  87         /* plla divisor by 2 */
  88         if (mckr & (1 << 12))
  89                 gd->arch.plla_rate_hz >>= 1;
  90
  91         gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
  92         freq = gd->arch.mck_rate_hz;
  93
  94         /* prescale */
  95         freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
  96
  97         switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
  98         case AT91_PMC_MCKR_MDIV_2:
  99                 gd->arch.mck_rate_hz = freq / 2;
 100                 break;
 101         case AT91_PMC_MCKR_MDIV_3:
 102                 gd->arch.mck_rate_hz = freq / 3;
 103                 break;
 104         case AT91_PMC_MCKR_MDIV_4:
 105                 gd->arch.mck_rate_hz = freq / 4;
 106                 break;
 107         default:
 108                 break;
 109         }
 110
 111         gd->arch.cpu_clk_rate_hz = freq;
 112
 113         return 0;
 114 }
 115
 116 void at91_plla_init(u32 pllar)
 117 {
 118         struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 119
 120         writel(pllar, &pmc->pllar);
 121         while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
 122                 ;
 123 }
 124
 125 void at91_mck_init(u32 mckr)
 126 {
 127         struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 128         u32 tmp;
 129
 130         tmp = readl(&pmc->mckr);
 131         tmp &= ~(AT91_PMC_MCKR_CSS_MASK  |
 132                  AT91_PMC_MCKR_PRES_MASK |
 133                  AT91_PMC_MCKR_MDIV_MASK |
 134                  AT91_PMC_MCKR_PLLADIV_2);
 135 #ifdef CPU_HAS_H32MXDIV
 136         tmp &= ~AT91_PMC_MCKR_H32MXDIV;
 137 #endif
 138
 139         tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK  |
 140                        AT91_PMC_MCKR_PRES_MASK |
 141                        AT91_PMC_MCKR_MDIV_MASK |
 142                        AT91_PMC_MCKR_PLLADIV_2);
 143 #ifdef CPU_HAS_H32MXDIV
 144         tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
 145 #endif
 146
 147         writel(tmp, &pmc->mckr);
 148
 149         while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
 150                 ;
 151 }
 152
 153 int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div)
 154 {
 155         struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 156         u32 regval, status;
 157         u32 timeout = 1000;
 158
 159         if (id > AT91_PMC_PCR_PID_MASK)
 160                 return -EINVAL;
 161
 162         if (div > 0xff)
 163                 return -EINVAL;
 164
 165         if (clk_source == GCK_CSS_UPLL_CLK) {
 166                 if (at91_upll_clk_enable())
 167                         return -ENODEV;
 168         }
 169
 170         writel(id, &pmc->pcr);
 171         regval = readl(&pmc->pcr);
 172         regval &= ~AT91_PMC_PCR_GCKCSS;
 173         regval &= ~AT91_PMC_PCR_GCKDIV;
 174
 175         switch (clk_source) {
 176         case GCK_CSS_SLOW_CLK:
 177                 regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK;
 178                 break;
 179         case GCK_CSS_MAIN_CLK:
 180                 regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK;
 181                 break;
 182         case GCK_CSS_PLLA_CLK:
 183                 regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK;
 184                 break;
 185         case GCK_CSS_UPLL_CLK:
 186                 regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK;
 187                 break;
 188         case GCK_CSS_MCK_CLK:
 189                 regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK;
 190                 break;
 191         case GCK_CSS_AUDIO_CLK:
 192                 regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK;
 193                 break;
 194         default:
 195                 printf("Error GCK clock source selection!\n");
 196                 return -EINVAL;
 197         }
 198
 199         regval |= AT91_PMC_PCR_CMD_WRITE |
 200                   AT91_PMC_PCR_GCKDIV_(div) |
 201                   AT91_PMC_PCR_GCKEN;
 202
 203         writel(regval, &pmc->pcr);
 204
 205         do {
 206                 udelay(1);
 207                 status = readl(&pmc->sr);
 208         } while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY)));
 209
 210         if (!timeout)
 211                 printf("Timeout waiting for GCK ready!\n");
 212
 213         return 0;
 214 }
 215
 216 u32 at91_get_periph_generated_clk(u32 id)
 217 {
 218         struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 219         u32 regval, clk_source, div;
 220         u32 freq;
 221
 222         if (id > AT91_PMC_PCR_PID_MASK)
 223                 return 0;
 224
 225         writel(id, &pmc->pcr);
 226         regval = readl(&pmc->pcr);
 227
 228         clk_source = regval & AT91_PMC_PCR_GCKCSS;
 229         switch (clk_source) {
 230         case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
 231                 freq = CONFIG_SYS_AT91_SLOW_CLOCK;
 232                 break;
 233         case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
 234                 freq = gd->arch.main_clk_rate_hz;
 235                 break;
 236         case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
 237                 freq = gd->arch.plla_rate_hz;
 238                 break;
 239         case AT91_PMC_PCR_GCKCSS_UPLL_CLK:
 240                 freq = AT91_UTMI_PLL_CLK_FREQ;
 241                 break;
 242         case AT91_PMC_PCR_GCKCSS_MCK_CLK:
 243                 freq = gd->arch.mck_rate_hz;
 244                 break;
 245         default:
 246                 printf("Improper GCK clock source selection!\n");
 247                 freq = 0;
 248                 break;
 249         }
 250
 251         div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
 252         div += 1;
 253
 254         return freq / div;
 255 }