git.sur5r.net Git - u-boot/blob - arch/arm/mach-at91/spl.c

   1 /*
   2  * Copyright (C) 2013 Atmel Corporation
   3  *                    Bo Shen <voice.shen@atmel.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <asm/io.h>
  10 #include <asm/arch/at91_common.h>
  11 #include <asm/arch/at91_wdt.h>
  12 #include <asm/arch/clk.h>
  13 #include <spl.h>
  14
  15 #if defined(CONFIG_AT91SAM9_WATCHDOG)
  16 void at91_disable_wdt(void) { }
  17 #else
  18 void at91_disable_wdt(void)
  19 {
  20         struct at91_wdt *wdt = (struct at91_wdt *)ATMEL_BASE_WDT;
  21
  22         writel(AT91_WDT_MR_WDDIS, &wdt->mr);
  23 }
  24 #endif
  25
  26 #if defined(CONFIG_SAMA5D2)
  27 struct {
  28         u32     r4;
  29 } bootrom_stash __attribute__((section(".data")));
  30
  31 u32 spl_boot_device(void)
  32 {
  33         u32 dev = (bootrom_stash.r4 >> ATMEL_SAMA5D2_BOOT_FROM_OFF) &
  34                   ATMEL_SAMA5D2_BOOT_FROM_MASK;
  35         u32 off = (bootrom_stash.r4 >> ATMEL_SAMA5D2_BOOT_DEV_ID_OFF) &
  36                   ATMEL_SAMA5D2_BOOT_DEV_ID_MASK;
  37
  38 #if defined(CONFIG_SYS_USE_MMC)
  39         if (dev == ATMEL_SAMA5D2_BOOT_FROM_MCI) {
  40                 if (off == 0)
  41                         return BOOT_DEVICE_MMC1;
  42                 if (off == 1)
  43                         return BOOT_DEVICE_MMC2;
  44                 printf("ERROR: MMC controller %i not present!\n", dev);
  45                 hang();
  46         }
  47 #endif
  48
  49 #if defined(CONFIG_SYS_USE_SERIALFLASH) || defined(CONFIG_SYS_USE_SPIFLASH)
  50         if (dev == ATMEL_SAMA5D2_BOOT_FROM_SPI)
  51                 return BOOT_DEVICE_SPI;
  52 #endif
  53
  54         printf("ERROR: SMC/TWI/QSPI boot device not supported!\n"
  55                "       Boot device %i, controller number %i\n", dev, off);
  56
  57         return BOOT_DEVICE_NONE;
  58 }
  59 #else
  60 u32 spl_boot_device(void)
  61 {
  62 #ifdef CONFIG_SYS_USE_MMC
  63         return BOOT_DEVICE_MMC1;
  64 #elif CONFIG_SYS_USE_NANDFLASH
  65         return BOOT_DEVICE_NAND;
  66 #elif CONFIG_SYS_USE_SERIALFLASH || CONFIG_SYS_USE_SPIFLASH
  67         return BOOT_DEVICE_SPI;
  68 #endif
  69         return BOOT_DEVICE_NONE;
  70 }
  71 #endif
  72
  73 u32 spl_boot_mode(void)
  74 {
  75         switch (spl_boot_device()) {
  76 #ifdef CONFIG_SYS_USE_MMC
  77         case BOOT_DEVICE_MMC1:
  78         case BOOT_DEVICE_MMC2:
  79                 return MMCSD_MODE_FS;
  80                 break;
  81 #endif
  82         case BOOT_DEVICE_NONE:
  83         default:
  84                 hang();
  85         }
  86 }