git.sur5r.net Git - u-boot/blob - arch/arm/mach-davinci/lxt972.c

   1 /*
   2  * Intel LXT971/LXT972 PHY Driver for TI DaVinci
   3  * (TMS320DM644x) based boards.
   4  *
   5  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   6  *
   7  * --------------------------------------------------------
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #include <common.h>
  13 #include <net.h>
  14 #include <miiphy.h>
  15 #include <lxt971a.h>
  16 #include <asm/arch/emac_defs.h>
  17 #include "../../../drivers/net/davinci_emac.h"
  18
  19 #ifdef CONFIG_DRIVER_TI_EMAC
  20
  21 #ifdef CONFIG_CMD_NET
  22
  23 int lxt972_is_phy_connected(int phy_addr)
  24 {
  25         u_int16_t id1, id2;
  26
  27         if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
  28                 return(0);
  29         if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
  30                 return(0);
  31
  32         if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
  33                 return(1);
  34
  35         return(0);
  36 }
  37
  38 int lxt972_get_link_speed(int phy_addr)
  39 {
  40         u_int16_t stat1, tmp;
  41         volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
  42
  43         if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
  44                 return(0);
  45
  46         if (!(stat1 & PHY_LXT971_STAT2_LINK))   /* link up? */
  47                 return(0);
  48
  49         if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
  50                 return(0);
  51
  52         tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
  53
  54         davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
  55         /* Read back */
  56         if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
  57                 return(0);
  58
  59         /* Speed doesn't matter, there is no setting for it in EMAC... */
  60         if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
  61                 /* set DM644x EMAC for Full Duplex  */
  62                 emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
  63                         EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
  64         } else {
  65                 /*set DM644x EMAC for Half Duplex  */
  66                 emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
  67         }
  68
  69         return(1);
  70 }
  71
  72
  73 int lxt972_init_phy(int phy_addr)
  74 {
  75         int ret = 1;
  76
  77         if (!lxt972_get_link_speed(phy_addr)) {
  78                 /* Try another time */
  79                 ret = lxt972_get_link_speed(phy_addr);
  80         }
  81
  82         /* Disable PHY Interrupts */
  83         davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
  84
  85         return(ret);
  86 }
  87
  88
  89 int lxt972_auto_negotiate(int phy_addr)
  90 {
  91         u_int16_t tmp;
  92
  93         if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
  94                 return(0);
  95
  96         /* Restart Auto_negotiation  */
  97         tmp |= BMCR_ANRESTART;
  98         davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
  99
 100         /*check AutoNegotiate complete */
 101         udelay (10000);
 102         if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
 103                 return(0);
 104
 105         if (!(tmp & BMSR_ANEGCOMPLETE))
 106                 return(0);
 107
 108         return (lxt972_get_link_speed(phy_addr));
 109 }
 110
 111 #endif  /* CONFIG_CMD_NET */
 112
 113 #endif  /* CONFIG_DRIVER_ETHER */