8 prompt "AM33xx board select"
11 config TARGET_AM335X_EVM
12 bool "Support am335x_evm"
13 select BOARD_LATE_INIT
17 select TI_I2C_BOARD_DETECT
21 imply SPL_GPIO_SUPPORT
23 imply SPL_LIBCOMMON_SUPPORT
24 imply SPL_LIBDISK_SUPPORT
25 imply SPL_LIBGENERIC_SUPPORT
27 imply SPL_NAND_SUPPORT
28 imply SPL_POWER_SUPPORT
29 imply SPL_SERIAL_SUPPORT
30 imply SPL_WATCHDOG_SUPPORT
31 imply SPL_YMODEM_SUPPORT
33 This option specifies support for the AM335x
34 GP and HS EVM development platforms. The AM335x
35 GP EVM is a standalone test, development, and
36 evaluation module system that enables developers
37 to write software and develop hardware around
38 an AM335x processor subsystem.
40 config TARGET_AM335X_BALTOS
41 bool "Support am335x_baltos"
42 select BOARD_LATE_INIT
47 config TARGET_AM335X_IGEP0033
48 bool "Support am335x_igep0033"
53 config TARGET_AM335X_SHC
54 bool "Support am335x based shc board from bosch"
55 select BOARD_LATE_INIT
60 config TARGET_AM335X_SL50
61 bool "Support am335x_sl50"
62 select BOARD_LATE_INIT
68 bool "Support bav335x"
69 select BOARD_LATE_INIT
73 The BAV335x OEM Network Processor integrates all the functions of an
74 embedded network computer in a small, easy to use SODIMM module which
75 incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
76 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
77 ethernet with simple connection to external connectors.
79 For more information, visit: http://birdland.com/oem
81 config TARGET_CHILIBOARD
82 bool "Grinn chiliBoard"
83 select AM33XX_CHILISOM
84 select BOARD_LATE_INIT
89 bool "Support cm_t335"
100 config TARGET_PENGWYN
101 bool "Support pengwyn"
107 bool "Support pepper"
118 config TARGET_AM43XX_EVM
119 bool "Support am43xx_evm"
120 select BOARD_LATE_INIT
121 select TI_I2C_BOARD_DETECT
122 imply SPL_ENV_SUPPORT
123 imply SPL_EXT_SUPPORT
124 imply SPL_FAT_SUPPORT
125 imply SPL_GPIO_SUPPORT
126 imply SPL_I2C_SUPPORT
127 imply SPL_LIBCOMMON_SUPPORT
128 imply SPL_LIBDISK_SUPPORT
129 imply SPL_LIBGENERIC_SUPPORT
130 imply SPL_MMC_SUPPORT
131 imply SPL_NAND_SUPPORT
132 imply SPL_POWER_SUPPORT
133 imply SPL_SERIAL_SUPPORT
134 imply SPL_WATCHDOG_SUPPORT
135 imply SPL_YMODEM_SUPPORT
137 This option specifies support for the AM43xx
138 GP and HS EVM development platforms.The AM437x
139 GP EVM is a standalone test, development, and
140 evaluation module system that enables developers
141 to write software and develop hardware around
142 an AM43xx processor subsystem.
146 config ISW_ENTRY_ADDR
147 hex "Address in memory or XIP flash of bootloader entry point"
149 After any reset, the boot ROM on the AM43XX SOC
150 searches the boot media for a valid boot image.
151 For non-XIP devices, the ROM then copies the
152 image into internal memory.
153 For all boot modes, after the ROM processes the
154 boot image it eventually computes the entry
155 point address depending on the device type
156 (secure/non-secure), boot media (xip/non-xip) and
158 default 0x402F4000 if AM43XX
159 default 0x402F0400 if AM33XX
161 config PUB_ROM_DATA_SIZE
162 hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
164 During the device boot, the public ROM uses the top of
165 the public L3 OCMC RAM to store r/w data like stack,
166 heap, globals etc. When the ROM is copying the boot
167 image from the boot media into memory, the image must
168 not spill over into this area. This value can be used
169 during compile time to determine the maximum size of a
170 boot image. Once the ROM transfers control to the boot
171 image, this area is no longer used, and can be reclaimed
172 for run time use by the boot image.