git.sur5r.net Git - u-boot/blob - arch/arm/mach-socfpga/misc_gen5.c

   1 /*
   2  *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <asm/io.h>
   9 #include <errno.h>
  10 #include <fdtdec.h>
  11 #include <libfdt.h>
  12 #include <altera.h>
  13 #include <miiphy.h>
  14 #include <netdev.h>
  15 #include <watchdog.h>
  16 #include <asm/arch/misc.h>
  17 #include <asm/arch/reset_manager.h>
  18 #include <asm/arch/scan_manager.h>
  19 #include <asm/arch/sdram.h>
  20 #include <asm/arch/system_manager.h>
  21 #include <asm/arch/nic301.h>
  22 #include <asm/arch/scu.h>
  23 #include <asm/pl310.h>
  24
  25 #include <dt-bindings/reset/altr,rst-mgr.h>
  26
  27 DECLARE_GLOBAL_DATA_PTR;
  28
  29 static struct pl310_regs *const pl310 =
  30         (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
  31 static struct socfpga_system_manager *sysmgr_regs =
  32         (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
  33 static struct socfpga_reset_manager *reset_manager_base =
  34         (struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
  35 static struct nic301_registers *nic301_regs =
  36         (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
  37 static struct scu_registers *scu_regs =
  38         (struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
  39 static struct socfpga_sdr_ctrl *sdr_ctrl =
  40         (struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
  41
  42 /*
  43  * DesignWare Ethernet initialization
  44  */
  45 #ifdef CONFIG_ETH_DESIGNWARE
  46 void dwmac_deassert_reset(const unsigned int of_reset_id,
  47                                  const u32 phymode)
  48 {
  49         u32 physhift, reset;
  50
  51         if (of_reset_id == EMAC0_RESET) {
  52                 physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
  53                 reset = SOCFPGA_RESET(EMAC0);
  54         } else if (of_reset_id == EMAC1_RESET) {
  55                 physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
  56                 reset = SOCFPGA_RESET(EMAC1);
  57         } else {
  58                 printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
  59                 return;
  60         }
  61
  62         /* configure to PHY interface select choosed */
  63         clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
  64                         SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
  65                         phymode << physhift);
  66
  67         /* Release the EMAC controller from reset */
  68         socfpga_per_reset(reset, 0);
  69 }
  70
  71 static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
  72 {
  73         if (!phymode)
  74                 return -EINVAL;
  75
  76         if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
  77                 *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
  78                 return 0;
  79         }
  80
  81         if (!strcmp(phymode, "rgmii")) {
  82                 *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
  83                 return 0;
  84         }
  85
  86         if (!strcmp(phymode, "rmii")) {
  87                 *modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
  88                 return 0;
  89         }
  90
  91         return -EINVAL;
  92 }
  93
  94 static int socfpga_eth_reset(void)
  95 {
  96         const void *fdt = gd->fdt_blob;
  97         struct fdtdec_phandle_args args;
  98         const char *phy_mode;
  99         u32 phy_modereg;
 100         int nodes[2];   /* Max. two GMACs */
 101         int ret, count;
 102         int i, node;
 103
 104         /* Put both GMACs into RESET state. */
 105         socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
 106         socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
 107
 108         count = fdtdec_find_aliases_for_id(fdt, "ethernet",
 109                                            COMPAT_ALTERA_SOCFPGA_DWMAC,
 110                                            nodes, ARRAY_SIZE(nodes));
 111         for (i = 0; i < count; i++) {
 112                 node = nodes[i];
 113                 if (node <= 0)
 114                         continue;
 115
 116                 ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
 117                                                      "#reset-cells", 1, 0,
 118                                                      &args);
 119                 if (ret || (args.args_count != 1)) {
 120                         debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
 121                         continue;
 122                 }
 123
 124                 phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
 125                 ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
 126                 if (ret) {
 127                         debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
 128                         continue;
 129                 }
 130
 131                 dwmac_deassert_reset(args.args[0], phy_modereg);
 132         }
 133
 134         return 0;
 135 }
 136 #else
 137 static int socfpga_eth_reset(void)
 138 {
 139         return 0;
 140 };
 141 #endif
 142
 143 static const struct {
 144         const u16       pn;
 145         const char      *name;
 146         const char      *var;
 147 } socfpga_fpga_model[] = {
 148         /* Cyclone V E */
 149         { 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
 150         { 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
 151         { 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
 152         { 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
 153         { 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
 154         /* Cyclone V GX/GT */
 155         { 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
 156         { 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
 157         { 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
 158         { 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
 159         { 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
 160         /* Cyclone V SE/SX/ST */
 161         { 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
 162         { 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
 163         { 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
 164         { 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
 165         /* Arria V */
 166         { 0x2d03, "Arria V, D5", "av_d5" },
 167 };
 168
 169 static int socfpga_fpga_id(const bool print_id)
 170 {
 171         const u32 altera_mi = 0x6e;
 172         const u32 id = scan_mgr_get_fpga_id();
 173
 174         const u32 lsb = id & 0x00000001;
 175         const u32 mi = (id >> 1) & 0x000007ff;
 176         const u32 pn = (id >> 12) & 0x0000ffff;
 177         const u32 version = (id >> 28) & 0x0000000f;
 178         int i;
 179
 180         if ((mi != altera_mi) || (lsb != 1)) {
 181                 printf("FPGA:  Not Altera chip ID\n");
 182                 return -EINVAL;
 183         }
 184
 185         for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
 186                 if (pn == socfpga_fpga_model[i].pn)
 187                         break;
 188
 189         if (i == ARRAY_SIZE(socfpga_fpga_model)) {
 190                 printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
 191                 return -EINVAL;
 192         }
 193
 194         if (print_id)
 195                 printf("FPGA:  Altera %s, version 0x%01x\n",
 196                        socfpga_fpga_model[i].name, version);
 197         return i;
 198 }
 199
 200 /*
 201  * Print CPU information
 202  */
 203 #if defined(CONFIG_DISPLAY_CPUINFO)
 204 int print_cpuinfo(void)
 205 {
 206         const u32 bsel =
 207                 SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
 208
 209         puts("CPU:   Altera SoCFPGA Platform\n");
 210         socfpga_fpga_id(1);
 211
 212         printf("BOOT:  %s\n", bsel_str[bsel].name);
 213         return 0;
 214 }
 215 #endif
 216
 217 #ifdef CONFIG_ARCH_MISC_INIT
 218 int arch_misc_init(void)
 219 {
 220         const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 221         const int fpga_id = socfpga_fpga_id(0);
 222         env_set("bootmode", bsel_str[bsel].mode);
 223         if (fpga_id >= 0)
 224                 env_set("fpgatype", socfpga_fpga_model[fpga_id].var);
 225         return socfpga_eth_reset();
 226 }
 227 #endif
 228
 229 /*
 230  * Convert all NIC-301 AMBA slaves from secure to non-secure
 231  */
 232 static void socfpga_nic301_slave_ns(void)
 233 {
 234         writel(0x1, &nic301_regs->lwhps2fpgaregs);
 235         writel(0x1, &nic301_regs->hps2fpgaregs);
 236         writel(0x1, &nic301_regs->acp);
 237         writel(0x1, &nic301_regs->rom);
 238         writel(0x1, &nic301_regs->ocram);
 239         writel(0x1, &nic301_regs->sdrdata);
 240 }
 241
 242 static u32 iswgrp_handoff[8];
 243
 244 int arch_early_init_r(void)
 245 {
 246         int i;
 247
 248         /*
 249          * Write magic value into magic register to unlock support for
 250          * issuing warm reset. The ancient kernel code expects this
 251          * value to be written into the register by the bootloader, so
 252          * to support that old code, we write it here instead of in the
 253          * reset_cpu() function just before resetting the CPU.
 254          */
 255         writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
 256
 257         for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
 258                 iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
 259
 260         socfpga_bridges_reset(1);
 261
 262         socfpga_nic301_slave_ns();
 263
 264         /*
 265          * Private components security:
 266          * U-Boot : configure private timer, global timer and cpu component
 267          * access as non secure for kernel stage (as required by Linux)
 268          */
 269         setbits_le32(&scu_regs->sacr, 0xfff);
 270
 271         /* Configure the L2 controller to make SDRAM start at 0 */
 272 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 273         writel(0x2, &nic301_regs->remap);
 274 #else
 275         writel(0x1, &nic301_regs->remap);       /* remap.mpuzero */
 276         writel(0x1, &pl310->pl310_addr_filter_start);
 277 #endif
 278
 279         /* Add device descriptor to FPGA device table */
 280         socfpga_fpga_add();
 281
 282 #ifdef CONFIG_DESIGNWARE_SPI
 283         /* Get Designware SPI controller out of reset */
 284         socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
 285         socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
 286 #endif
 287
 288 #ifdef CONFIG_NAND_DENALI
 289         socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
 290 #endif
 291
 292         return 0;
 293 }
 294
 295 static void socfpga_sdram_apply_static_cfg(void)
 296 {
 297         const u32 applymask = 0x8;
 298         u32 val = readl(&sdr_ctrl->static_cfg) | applymask;
 299
 300         /*
 301          * SDRAM staticcfg register specific:
 302          * When applying the register setting, the CPU must not access
 303          * SDRAM. Luckily for us, we can abuse i-cache here to help us
 304          * circumvent the SDRAM access issue. The idea is to make sure
 305          * that the code is in one full i-cache line by branching past
 306          * it and back. Once it is in the i-cache, we execute the core
 307          * of the code and apply the register settings.
 308          *
 309          * The code below uses 7 instructions, while the Cortex-A9 has
 310          * 32-byte cachelines, thus the limit is 8 instructions total.
 311          */
 312         asm volatile(
 313                 ".align 5                       \n"
 314                 "       b       2f              \n"
 315                 "1:     str     %0,     [%1]    \n"
 316                 "       dsb                     \n"
 317                 "       isb                     \n"
 318                 "       b       3f              \n"
 319                 "2:     b       1b              \n"
 320                 "3:     nop                     \n"
 321         : : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
 322 }
 323
 324 int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 325 {
 326         if (argc != 2)
 327                 return CMD_RET_USAGE;
 328
 329         argv++;
 330
 331         switch (*argv[0]) {
 332         case 'e':       /* Enable */
 333                 writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
 334                 socfpga_sdram_apply_static_cfg();
 335                 writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
 336                 writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
 337                 writel(iswgrp_handoff[1], &nic301_regs->remap);
 338                 break;
 339         case 'd':       /* Disable */
 340                 writel(0, &sysmgr_regs->fpgaintfgrp_module);
 341                 writel(0, &sdr_ctrl->fpgaport_rst);
 342                 socfpga_sdram_apply_static_cfg();
 343                 writel(0, &reset_manager_base->brg_mod_reset);
 344                 writel(1, &nic301_regs->remap);
 345                 break;
 346         default:
 347                 return CMD_RET_USAGE;
 348         }
 349
 350         return 0;
 351 }
 352
 353 U_BOOT_CMD(
 354         bridge, 2, 1, do_bridge,
 355         "SoCFPGA HPS FPGA bridge control",
 356         "enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 357         "bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 358         ""
 359 );