4 bool "Tegra common options"
16 select VIDCONSOLE_AS_LCD
18 config TEGRA_ARMV7_COMMON
19 bool "Tegra 32-bit common options"
25 config TEGRA_ARMV8_COMMON
26 bool "Tegra 64-bit common options"
31 prompt "Tegra SoC select"
36 select TEGRA_ARMV7_COMMON
40 select TEGRA_ARMV7_COMMON
43 bool "Tegra114 family"
44 select TEGRA_ARMV7_COMMON
47 bool "Tegra124 family"
48 select TEGRA_ARMV7_COMMON
51 bool "Tegra210 family"
52 select TEGRA_ARMV8_COMMON
56 config TEGRA_DISCONNECT_UDC_ON_BOOT
57 bool "Disconnect USB device mode controller on boot"
60 When loading U-Boot into RAM over USB protocols using tools such as
61 tegrarcm or L4T's exec-uboot.sh/tegraflash.py, Tegra's USB device
62 mode controller is initialized and enumerated by the host PC running
63 the tool. Unfortunately, these tools do not shut down the USB
64 controller before executing the downloaded code, and so the host PC
65 does not "de-enumerate" the USB device. This option shuts down the
66 USB controller when U-Boot boots to avoid leaving a stale USB device
69 config SYS_MALLOC_F_LEN
72 source "arch/arm/mach-tegra/tegra20/Kconfig"
73 source "arch/arm/mach-tegra/tegra30/Kconfig"
74 source "arch/arm/mach-tegra/tegra114/Kconfig"
75 source "arch/arm/mach-tegra/tegra124/Kconfig"
76 source "arch/arm/mach-tegra/tegra210/Kconfig"