6 config ARCH_UNIPHIER_32BIT
9 select CPU_V7_HAS_NONSEC
11 select ARCH_SUPPORT_PSCI
14 prompt "UniPhier SoC select"
15 default ARCH_UNIPHIER_PRO4
17 config ARCH_UNIPHIER_SLD3
18 bool "UniPhier sLD3 SoC"
19 select ARCH_UNIPHIER_32BIT
21 config ARCH_UNIPHIER_LD4_SLD8
22 bool "UniPhier LD4/sLD8 SoCs"
23 select ARCH_UNIPHIER_32BIT
25 config ARCH_UNIPHIER_PRO4
26 bool "UniPhier Pro4 SoC"
27 select ARCH_UNIPHIER_32BIT
29 config ARCH_UNIPHIER_PRO5_PXS2_LD6B
30 bool "UniPhier Pro5/PXs2/LD6b SoCs"
31 select ARCH_UNIPHIER_32BIT
33 config ARCH_UNIPHIER_V8_MULTI
34 bool "UniPhier V8 SoCs"
41 config ARCH_UNIPHIER_LD4
42 bool "Enable UniPhier LD4 SoC support"
43 depends on ARCH_UNIPHIER_LD4_SLD8
46 config ARCH_UNIPHIER_SLD8
47 bool "Enable UniPhier sLD8 SoC support"
48 depends on ARCH_UNIPHIER_LD4_SLD8
51 config ARCH_UNIPHIER_PRO5
52 bool "Enable UniPhier Pro5 SoC support"
53 depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
56 config ARCH_UNIPHIER_PXS2
57 bool "Enable UniPhier Pxs2 SoC support"
58 depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
61 config ARCH_UNIPHIER_LD6B
62 bool "Enable UniPhier LD6b SoC support"
63 depends on ARCH_UNIPHIER_PRO5_PXS2_LD6B
66 config ARCH_UNIPHIER_LD11
67 bool "Enable UniPhier LD11 SoC support"
68 depends on ARCH_UNIPHIER_V8_MULTI
71 config ARCH_UNIPHIER_LD20
72 bool "Enable UniPhier LD20 SoC support"
73 depends on ARCH_UNIPHIER_V8_MULTI
77 config ARCH_UNIPHIER_PXS3
78 bool "Enable UniPhier PXs3 SoC support"
79 depends on ARCH_UNIPHIER_V8_MULTI
83 bool "Enable the UniPhier L2 cache controller"
84 depends on ARCH_UNIPHIER_32BIT
85 select SYS_CACHE_SHIFT_7
88 This option allows to use the UniPhier System Cache as L2 cache.
90 config MICRO_SUPPORT_CARD
91 bool "Use Micro Support Card"
93 This option provides support for the expansion board, available
94 on some UniPhier reference boards.
96 Say Y to use the on-board UART, Ether, LED devices.
99 bool "Enable boot mode pins monitor command"
102 The command "pinmon" shows the state of the boot mode pins.
103 The boot mode pins are latched when the system reset is deasserted
104 and determine which device the system should load a boot image from.
106 config CMD_DDRPHY_DUMP
107 bool "Enable dump command of DDR PHY parameters"
108 depends on ARCH_UNIPHIER_LD4 || ARCH_UNIPHIER_PRO4 || \
109 ARCH_UNIPHIER_SLD8 || ARCH_UNIPHIER_LD11
112 The command "ddrphy" shows the resulting parameters of DDR PHY
113 training; it is useful for the evaluation of DDR PHY training.
115 config CMD_DDRMPHY_DUMP
116 bool "Enable dump command of DDR Multi PHY parameters"
117 depends on ARCH_UNIPHIER_PXS2 || ARCH_UNIPHIER_LD6B
120 The command "ddrmphy" shows the resulting parameters of DDR Multi PHY
121 training; it is useful for the evaluation of DDR Multi PHY training.