git.sur5r.net Git - u-boot/blob - arch/arm/mach-uniphier/boot-mode/spl_board.c

   1 /*
   2  * Copyright (C) 2016 Socionext Inc.
   3  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #include <common.h>
   9 #include <spl.h>
  10 #include <linux/io.h>
  11 #include <asm/processor.h>
  12
  13 #include "../soc-info.h"
  14
  15 void spl_board_announce_boot_device(void)
  16 {
  17         printf("eMMC");
  18 }
  19
  20 struct uniphier_romfunc_table {
  21         void *mmc_send_cmd;
  22         void *mmc_card_blockaddr;
  23         void *mmc_switch_part;
  24         void *mmc_load_image;
  25 };
  26
  27 static const struct uniphier_romfunc_table uniphier_ld11_romfunc_table = {
  28         .mmc_send_cmd = (void *)0x20d8,
  29         .mmc_card_blockaddr = (void *)0x1b68,
  30         .mmc_switch_part = (void *)0x1c38,
  31         .mmc_load_image = (void *)0x2e48,
  32 };
  33
  34 static const struct uniphier_romfunc_table uniphier_ld20_romfunc_table = {
  35         .mmc_send_cmd = (void *)0x2130,
  36         .mmc_card_blockaddr = (void *)0x1ba0,
  37         .mmc_switch_part = (void *)0x1c70,
  38         .mmc_load_image = (void *)0x2ef0,
  39 };
  40
  41 int uniphier_rom_get_mmc_funcptr(int (**send_cmd)(u32, u32),
  42                                  int (**card_blockaddr)(u32),
  43                                  int (**switch_part)(int),
  44                                  int (**load_image)(u32, uintptr_t, u32))
  45 {
  46         const struct uniphier_romfunc_table *table;
  47
  48         switch (uniphier_get_soc_type()) {
  49         case SOC_UNIPHIER_LD11:
  50                 table = &uniphier_ld11_romfunc_table;
  51                 break;
  52         case SOC_UNIPHIER_LD20:
  53                 table = &uniphier_ld20_romfunc_table;
  54                 break;
  55         default:
  56                 printf("unsupported SoC\n");
  57                 return -EINVAL;
  58         }
  59
  60         *send_cmd = table->mmc_send_cmd;
  61         *card_blockaddr = table->mmc_card_blockaddr;
  62         *switch_part = table->mmc_switch_part;
  63         *load_image = table->mmc_load_image;
  64
  65         return 0;
  66 }
  67
  68 static int spl_board_load_image(struct spl_image_info *spl_image,
  69                                 struct spl_boot_device *bootdev)
  70 {
  71         int (*send_cmd)(u32 cmd, u32 arg);
  72         int (*card_blockaddr)(u32 rca);
  73         int (*switch_part)(int part);
  74         int (*load_image)(u32 dev_addr, uintptr_t load_addr, u32 block_cnt);
  75         u32 dev_addr = CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR;
  76         const u32 rca = 0x1000; /* RCA assigned by Boot ROM */
  77         int ret;
  78
  79         ret = uniphier_rom_get_mmc_funcptr(&send_cmd, &card_blockaddr,
  80                                            &switch_part, &load_image);
  81         if (ret)
  82                 return ret;
  83
  84         /*
  85          * deselect card before SEND_CSD command.
  86          * Do not check the return code.  It fails, but it is OK.
  87          */
  88         (*send_cmd)(0x071a0000, 0); /* CMD7 (arg=0) */
  89
  90         /* reset CMD Line */
  91         writeb(0x6, 0x5a00022f);
  92         while (readb(0x5a00022f))
  93                 cpu_relax();
  94
  95         ret = (*card_blockaddr)(rca);
  96         if (ret) {
  97                 debug("card is block addressing\n");
  98         } else {
  99                 debug("card is byte addressing\n");
 100                 dev_addr *= 512;
 101         }
 102
 103         ret = (*send_cmd)(0x071a0000, rca << 16); /* CMD7: select card again */
 104         if (ret)
 105                 printf("failed to select card\n");
 106
 107         ret = (*switch_part)(1); /* Switch to Boot Partition 1 */
 108         if (ret)
 109                 printf("failed to switch partition\n");
 110
 111         ret = (*load_image)(dev_addr, CONFIG_SYS_TEXT_BASE, 1);
 112         if (ret) {
 113                 printf("failed to load image\n");
 114                 return ret;
 115         }
 116
 117         ret = spl_parse_image_header(spl_image, (void *)CONFIG_SYS_TEXT_BASE);
 118         if (ret)
 119                 return ret;
 120
 121         ret = (*load_image)(dev_addr, spl_image->load_addr,
 122                             spl_image->size / 512);
 123         if (ret) {
 124                 printf("failed to load image\n");
 125                 return ret;
 126         }
 127
 128         return 0;
 129 }
 130 SPL_LOAD_IMAGE_METHOD("eMMC", 0, BOOT_DEVICE_BOARD, spl_board_load_image);