]> git.sur5r.net Git - u-boot/blob - arch/m68k/cpu/mcf530x/start.S
powerpc:t4240: MAC9 and MAC10 should not be identified as 1G interface in some case
[u-boot] / arch / m68k / cpu / mcf530x / start.S
1 /*
2  * (C) Copyright 2015  Angelo Dureghello <angelo@sysam.it>
3  * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <asm-offsets.h>
9 #include <config.h>
10 #include "version.h"
11 #include <asm/cache.h>
12
13 #ifndef  CONFIG_IDENT_STRING
14 #define  CONFIG_IDENT_STRING ""
15 #endif
16
17 #define _START  _start
18 #define _FAULT  _fault
19
20
21 .macro  SAVE_ALL
22         move.w  #0x2700,%sr;            /* disable intrs */
23         subl    #60,%sp;                /* space for 15 regs */
24         moveml  %d0-%d7/%a0-%a6,%sp@
25 .endm
26
27 .macro  RESTORE_ALL
28         moveml  %sp@,%d0-%d7/%a0-%a6;
29         addl    #60,%sp;                /* space for 15 regs */
30         rte
31 .endm
32
33 /* If we come from a pre-loader we don't need an initial exception
34  * table.
35  */
36 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
37
38 .text
39 /*
40  *      Vector table. This is used for initial platform startup.
41  *      These vectors are to catch any un-intended traps.
42  */
43 _vectors:
44
45 /* Flash offset is 0 until we setup CS0 */
46 .long   0x00000000
47 #if defined(CONFIG_M5307) && \
48            (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
49 .long   _start - CONFIG_SYS_TEXT_BASE
50 #else
51 .long   _START
52 #endif
53
54 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
55 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
56 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
57 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
58 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
59 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
60 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
61 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
62
63 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
64 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
65 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
66 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
67 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
68 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
69 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
70 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
71
72 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
73 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
74 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
75 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
76 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
77 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
78 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
79 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
80
81 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
82 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
83 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
84 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
85 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
86 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
87 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
88 .long   _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
89
90 #endif
91
92         .text
93         .globl  _start
94 _start:
95         nop
96         nop
97         move.w  #0x2700,%sr
98
99         /* set MBAR address + valid flag */
100         move.l  #(CONFIG_SYS_MBAR + 1), %d0
101         move.c  %d0, %MBAR
102
103         move.l  #(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0
104         move.c  %d0, %RAMBAR
105
106         /* DS 4.8.2 (Cache Organization) invalidate and disable cache */
107         move.l  #CF_CACR_CINVA, %d0
108         movec   %d0, %CACR
109         move.l  #0, %d0
110         movec   %d0, %ACR0
111         movec   %d0, %ACR1
112
113         /*
114          * if we come from a pre-loader we have no exception table and
115          * therefore no VBR to set
116          */
117 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
118         move.l  #CONFIG_SYS_FLASH_BASE, %d0
119         movec   %d0, %VBR
120 #endif
121
122         /* initialize general use internal ram */
123         move.l  #0, %d0
124         move.l  #(ICACHE_STATUS), %a1   /* icache */
125         move.l  #(DCACHE_STATUS), %a2   /* dcache */
126         move.l  %d0, (%a1)
127         move.l  %d0, (%a2)
128
129         /*
130          * set stackpointer to internal sram end - 80
131          * (global data struct size + some bytes)
132          * get some stackspace for the first c-code,
133          */
134         move.l  #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
135         clr.l   %sp@-
136
137         /* put relocation table address to a5 */
138         move.l #__got_start, %a5
139
140         /* run low-level CPU init code (from flash) */
141         bsr cpu_init_f
142
143         /* run low-level board init code (from flash) */
144         bsr board_init_f
145
146         /* board_init_f() does not return */
147
148 /*--------------------------------------------------------------------------*/
149
150 /*
151  * void relocate_code (addr_sp, gd, addr_moni)
152  *
153  * This "function" does not return, instead it continues in RAM
154  * after relocating the monitor code.
155  *
156  */
157         .globl  relocate_code
158 relocate_code:
159         link.w  %a6,#0
160         move.l  8(%a6), %sp     /* set new stack pointer */
161         move.l  12(%a6), %d0    /* Save copy of Global Data pointer */
162         move.l  16(%a6), %a0    /* Save copy of Destination Address */
163
164         move.l  #CONFIG_SYS_MONITOR_BASE, %a1
165         move.l  #__init_end, %a2
166         move.l  %a0, %a3
167         /* copy the code to RAM */
168 1:
169         move.l  (%a1)+, (%a3)+
170         cmp.l   %a1,%a2
171         bgt.s   1b
172
173 /*
174  * We are done. Do not return, instead branch to second part of board
175  * initialization, now running from RAM.
176  */
177         move.l  %a0, %a1
178         add.l   #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1
179         jmp     (%a1)
180
181 in_ram:
182
183 clear_bss:
184         /*
185          * Now clear BSS segment
186          */
187         move.l  %a0, %a1
188         add.l   #(_sbss - CONFIG_SYS_MONITOR_BASE), %a1
189         move.l  %a0, %d1
190         add.l   #(_ebss - CONFIG_SYS_MONITOR_BASE), %d1
191 6:
192         clr.l   (%a1)+
193         cmp.l   %a1,%d1
194         bgt.s   6b
195
196         /*
197          * fix got table in RAM
198          */
199         move.l  %a0, %a1
200         add.l   #(__got_start - CONFIG_SYS_MONITOR_BASE), %a1
201         /* * fix got pointer register a5 */
202         move.l  %a1,%a5
203
204         move.l  %a0, %a2
205         add.l   #(__got_end - CONFIG_SYS_MONITOR_BASE), %a2
206
207 7:
208         move.l  (%a1),%d1
209         sub.l   #_start, %d1
210         add.l   %a0,%d1
211         move.l  %d1,(%a1)+
212         cmp.l   %a2, %a1
213         bne     7b
214
215         /* calculate relative jump to board_init_r in ram */
216         move.l  %a0, %a1
217         add.l   #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1
218
219         /* set parameters for board_init_r */
220         move.l  %a0,-(%sp)      /* dest_addr */
221         move.l  %d0,-(%sp)      /* gd */
222 #if defined(DEBUG) && (CONFIG_SYS_TEXT_BASE!=CONFIG_SYS_INT_FLASH_BASE) && \
223     defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
224         halt
225 #endif
226         jsr     (%a1)
227
228 /*--------------------------------------------------------------------------*/
229 /* exception code */
230         .globl _fault
231 _fault:
232         bra     _fault
233
234         .globl  _exc_handler
235 _exc_handler:
236         SAVE_ALL
237         movel   %sp,%sp@-
238         bsr     exc_handler
239         addql   #4,%sp
240         RESTORE_ALL
241
242         .globl  _int_handler
243 _int_handler:
244         SAVE_ALL
245         movel   %sp,%sp@-
246         bsr     int_handler
247         addql   #4,%sp
248         RESTORE_ALL
249
250 /*--------------------------------------------------------------------------*/
251
252         .globl  version_string
253 version_string:
254         .ascii  U_BOOT_VERSION
255         .ascii  " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
256         .ascii  CONFIG_IDENT_STRING, "\0"
257         .align  4