git.sur5r.net Git - u-boot/blob - arch/nios2/dts/3c120_devboard.dts

   1 /*
   2  *  Copyright (C) 2013 Altera Corporation
   3  *
   4  * This file is generated by sopc2dts.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /dts-v1/;
  10
  11 / {
  12         model = "altr,qsys_ghrd_3c120";
  13         compatible = "altr,qsys_ghrd_3c120";
  14         #address-cells = <1>;
  15         #size-cells = <1>;
  16
  17         cpus {
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20
  21                 cpu: cpu@0x0 {
  22                         device_type = "cpu";
  23                         compatible = "altr,nios2-1.0";
  24                         reg = <0x00000000>;
  25                         interrupt-controller;
  26                         #interrupt-cells = <1>;
  27                         clock-frequency = <125000000>;
  28                         dcache-line-size = <32>;
  29                         icache-line-size = <32>;
  30                         dcache-size = <32768>;
  31                         icache-size = <32768>;
  32                         altr,implementation = "fast";
  33                         altr,pid-num-bits = <8>;
  34                         altr,tlb-num-ways = <16>;
  35                         altr,tlb-num-entries = <128>;
  36                         altr,tlb-ptr-sz = <7>;
  37                         altr,has-div = <1>;
  38                         altr,has-mul = <1>;
  39                         altr,reset-addr = <0xc2800000>;
  40                         altr,fast-tlb-miss-addr = <0xc7fff400>;
  41                         altr,exception-addr = <0xd0000020>;
  42                         altr,has-initda = <1>;
  43                         altr,has-mmu = <1>;
  44                 };
  45         };
  46
  47         memory@0 {
  48                 device_type = "memory";
  49                 reg = <0x10000000 0x08000000>,
  50                         <0x07fff400 0x00000400>;
  51         };
  52
  53         sopc@0 {
  54                 device_type = "soc";
  55                 ranges;
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "altr,avalon", "simple-bus";
  59                 bus-frequency = <125000000>;
  60
  61                 pb_cpu_to_io: bridge@0x8000000 {
  62                         compatible = "simple-bus";
  63                         reg = <0x08000000 0x00800000>;
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66                         ranges = <0x00002000 0x08002000 0x00002000>,
  67                                 <0x00004000 0x08004000 0x00000400>,
  68                                 <0x00004400 0x08004400 0x00000040>,
  69                                 <0x00004800 0x08004800 0x00000040>,
  70                                 <0x00004c80 0x08004c80 0x00000020>,
  71                                 <0x00004cc0 0x08004cc0 0x00000010>,
  72                                 <0x00004ce0 0x08004ce0 0x00000010>,
  73                                 <0x00004d00 0x08004d00 0x00000010>,
  74                                 <0x00004d40 0x08004d40 0x00000008>,
  75                                 <0x00004d50 0x08004d50 0x00000008>,
  76                                 <0x00008000 0x08008000 0x00000020>,
  77                                 <0x00400000 0x08400000 0x00000020>;
  78
  79                         timer_1ms: timer@0x400000 {
  80                                 compatible = "altr,timer-1.0";
  81                                 reg = <0x00400000 0x00000020>;
  82                                 interrupt-parent = <&cpu>;
  83                                 interrupts = <11>;
  84                                 clock-frequency = <125000000>;
  85                         };
  86
  87                         timer_0: timer@0x8000 {
  88                                 compatible = "altr,timer-1.0";
  89                                 reg = < 0x00008000 0x00000020 >;
  90                                 interrupt-parent = < &cpu >;
  91                                 interrupts = < 5 >;
  92                                 clock-frequency = < 125000000 >;
  93                         };
  94
  95                         sysid: sysid@0x4d40 {
  96                                 compatible = "altr,sysid-1.0";
  97                                 reg = <0x00004d40 0x00000008>;
  98                         };
  99
 100                         jtag_uart: serial@0x4d50 {
 101                                 compatible = "altr,juart-1.0";
 102                                 reg = <0x00004d50 0x00000008>;
 103                                 interrupt-parent = <&cpu>;
 104                                 interrupts = <1>;
 105                         };
 106
 107                         tse_mac: ethernet@0x4000 {
 108                                 compatible = "altr,tse-1.0";
 109                                 reg = <0x00004000 0x00000400>,
 110                                         <0x00004400 0x00000040>,
 111                                         <0x00004800 0x00000040>,
 112                                         <0x00002000 0x00002000>;
 113                                 reg-names = "control_port", "rx_csr", "tx_csr", "s1";
 114                                 interrupt-parent = <&cpu>;
 115                                 interrupts = <2 3>;
 116                                 interrupt-names = "rx_irq", "tx_irq";
 117                                 rx-fifo-depth = <8192>;
 118                                 tx-fifo-depth = <8192>;
 119                                 max-frame-size = <1518>;
 120                                 local-mac-address = [ 00 00 00 00 00 00 ];
 121                                 phy-mode = "rgmii-id";
 122                                 phy-handle = <&phy0>;
 123                                 tse_mac_mdio: mdio {
 124                                         compatible = "altr,tse-mdio";
 125                                         #address-cells = <1>;
 126                                         #size-cells = <0>;
 127                                         phy0: ethernet-phy@18 {
 128                                                 reg = <18>;
 129                                                 device_type = "ethernet-phy";
 130                                         };
 131                                 };
 132                         };
 133
 134                         uart: serial@0x4c80 {
 135                                 compatible = "altr,uart-1.0";
 136                                 reg = <0x00004c80 0x00000020>;
 137                                 interrupt-parent = <&cpu>;
 138                                 interrupts = <10>;
 139                                 current-speed = <115200>;
 140                                 clock-frequency = <62500000>;
 141                         };
 142
 143                         user_led_pio_8out: gpio@0x4cc0 {
 144                                 compatible = "altr,pio-1.0";
 145                                 reg = <0x00004cc0 0x00000010>;
 146                                 resetvalue = <255>;
 147                                 altr,gpio-bank-width = <8>;
 148                                 #gpio-cells = <2>;
 149                                 gpio-controller;
 150                                 gpio-bank-name = "led";
 151                         };
 152
 153                         user_dipsw_pio_8in: gpio@0x4ce0 {
 154                                 compatible = "altr,pio-1.0";
 155                                 reg = <0x00004ce0 0x00000010>;
 156                                 interrupt-parent = <&cpu>;
 157                                 interrupts = <8>;
 158                                 edge_type = <2>;
 159                                 level_trigger = <0>;
 160                                 resetvalue = <0>;
 161                                 altr,gpio-bank-width = <8>;
 162                                 #gpio-cells = <2>;
 163                                 gpio-controller;
 164                                 gpio-bank-name = "dipsw";
 165                         };
 166
 167                         user_pb_pio_4in: gpio@0x4d00 {
 168                                 compatible = "altr,pio-1.0";
 169                                 reg = <0x00004d00 0x00000010>;
 170                                 interrupt-parent = <&cpu>;
 171                                 interrupts = <9>;
 172                                 edge_type = <2>;
 173                                 level_trigger = <0>;
 174                                 resetvalue = <0>;
 175                                 altr,gpio-bank-width = <4>;
 176                                 #gpio-cells = <2>;
 177                                 gpio-controller;
 178                                 gpio-bank-name = "pb";
 179                         };
 180                 };
 181
 182                 cfi_flash_64m: flash@0x0 {
 183                         compatible = "cfi-flash";
 184                         reg = <0x00000000 0x04000000>;
 185                         bank-width = <2>;
 186                         device-width = <1>;
 187                         #address-cells = <1>;
 188                         #size-cells = <1>;
 189
 190                         partition@800000 {
 191                                 reg = <0x00800000 0x01e00000>;
 192                                 label = "JFFS2 Filesystem";
 193                         };
 194                 };
 195         };
 196
 197         chosen {
 198                 bootargs = "debug console=ttyJ0,115200";
 199                 stdout-path = &jtag_uart;
 200         };
 201 };